[PATCH AUTOSEL 6.6 04/38] Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

[PATCH AUTOSEL 6.6 04/38] Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 180a8f12c21f41740fee09ca7f7aa98ff5bb99f8 ]

Some devices list 3 Gpio resources in the ACPI resource list for
the touchscreen:

1. GpioInt resource pointing to the GPIO used for the interrupt
2. GpioIo resource pointing to the reset GPIO
3. GpioIo resource pointing to the GPIO used for the interrupt

Note how the third extra GpioIo resource really is a duplicate
of the GpioInt provided info.

Ignore this extra GPIO, treating this setup the same as gpio_count == 2 &&
gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook
Colossus W803 rugged tablet and likely also on the CyberBook_T116K.

Reported-by: Maarten van der Schrieck
Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22
Suggested-by: Maarten van der Schrieck
Tested-by: Maarten van der Schrieck
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231223141650.10679-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/goodix.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index af32fbe57b63..b068ff8afbc9 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -884,7 +884,8 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 		}
 	}
 
-	if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
+	/* Some devices with gpio_int_idx 0 list a third unused GPIO */
+	if ((ts->gpio_count == 2 || ts->gpio_count == 3) && ts->gpio_int_idx == 0) {
 		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
 		gpio_mapping = acpi_goodix_int_first_gpios;
 	} else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) {
-- 
2.43.0

[PATCH AUTOSEL 6.6 09/38] HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2

[Sasha Levin]

From: Jiri Kosina <jkosina@suse.com>

[ Upstream commit afa6ac2690bb9904ff883c6e942281e1032a484d ]

Let logitech-hidpp driver claim Logitech G Pro X Superlight 2.

Reported-by: Marcus Rückert <darix@opensu.se>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 7bf12ca0eb4a..4519ee377aa7 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4650,6 +4650,8 @@ static const struct hid_device_id hidpp_devices[] = {
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC088) },
 	{ /* Logitech G Pro X Superlight Gaming Mouse over USB */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC094) },
+	{ /* Logitech G Pro X Superlight 2 Gaming Mouse over USB */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC09b) },
 
 	{ /* G935 Gaming Headset */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0x0a87),
-- 
2.43.0

[PATCH AUTOSEL 6.6 12/38] HID: nvidia-shield: Add missing null pointer checks to LED initialization

[Sasha Levin]

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit b6eda11c44dc89a681e1c105f0f4660e69b1e183 ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.

[jkosina@suse.com: tweak changelog a bit]
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-nvidia-shield.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/hid-nvidia-shield.c b/drivers/hid/hid-nvidia-shield.c
index c463e54decbc..edd0b0f1193b 100644
--- a/drivers/hid/hid-nvidia-shield.c
+++ b/drivers/hid/hid-nvidia-shield.c
@@ -800,6 +800,8 @@ static inline int thunderstrike_led_create(struct thunderstrike *ts)
 
 	led->name = devm_kasprintf(&ts->base.hdev->dev, GFP_KERNEL,
 				   "thunderstrike%d:blue:led", ts->id);
+	if (!led->name)
+		return -ENOMEM;
 	led->max_brightness = 1;
 	led->flags = LED_CORE_SUSPENDRESUME | LED_RETAIN_AT_SHUTDOWN;
 	led->brightness_get = &thunderstrike_led_get_brightness;
@@ -831,6 +833,8 @@ static inline int thunderstrike_psy_create(struct shield_device *shield_dev)
 	shield_dev->battery_dev.desc.name =
 		devm_kasprintf(&ts->base.hdev->dev, GFP_KERNEL,
 			       "thunderstrike_%d", ts->id);
+	if (!shield_dev->battery_dev.desc.name)
+		return -ENOMEM;
 
 	shield_dev->battery_dev.psy = power_supply_register(
 		&hdev->dev, &shield_dev->battery_dev.desc, &psy_cfg);
-- 
2.43.0

[PATCH AUTOSEL 6.6 19/38] Input: xpad - add Lenovo Legion Go controllers

[Sasha Levin]

From: Brenton Simpson <appsforartists@google.com>

[ Upstream commit 80441f76ee67002437db61f3b317ed80cce085d2 ]

The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck.
It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad,
volume buttons, a power button, and 2 LED ring lights.

The Legion Go firmware presents these controls as a USB hub with various
devices attached.  In its default state, the gamepad is presented as an
Xbox controller connected to this hub.  (By holding a combination of
buttons, it can be changed to use the older DirectInput API.)

This patch teaches the existing Xbox controller module `xpad` to bind to
the controller in the Legion Go, which enables support for the:

- directional pad,
- analog sticks (including clicks),
- X, Y, A, B,
- start and select (or menu and capture),
- shoulder buttons, and
- rumble.

The trackpad, touchscreen, volume controls, and power button are already
supported via existing kernel modules.  Two of the face buttons, the
gyroscopes, rear paddles, and LEDs are not.

After this patch lands, the Legion Go will be mostly functional in Linux,
out-of-the-box.  The various components of the USB hub can be synthesized
into a single logical controller (including the additional buttons) in
userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which
makes the Go fully functional.

Signed-off-by: Brenton Simpson <appsforartists@google.com>
Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/xpad.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index e2c1848182de..d0bb3edfd0a0 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -294,6 +294,7 @@ static const struct xpad_device {
 	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+	{ 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
 	{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
@@ -491,6 +492,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOX360_VENDOR(0x15e4),		/* Numark Xbox 360 controllers */
 	XPAD_XBOX360_VENDOR(0x162e),		/* Joytech Xbox 360 controllers */
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
+	XPAD_XBOX360_VENDOR(0x17ef),		/* Lenovo */
 	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harmonix Rock Band guitar and drums */
 	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA controllers */
-- 
2.43.0

[PATCH AUTOSEL 6.6 38/38] Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table

[Sasha Levin]

From: Szilard Fabian <szfabian@bluemarch.art>

[ Upstream commit 4255447ad34c5c3785fcdcf76cfa0271d6e5ed39 ]

Another Fujitsu-related patch.

In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.

i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:3092) not working at all.

So this notebook uses a hid-over-i2c touchpad which is managed by the
i2c_designware input driver. Since you can't find a PS/2 mouse port on this
computer and you can't connect a PS/2 mouse to it even with an official
port replicator I think it's safe to not use the PS/2 mouse port at all.

Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-acpipnpio.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index b585b1dab870..2fd056ebce1c 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -634,6 +634,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
 	},
+	{
+		/* Fujitsu Lifebook U728 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U728"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
 	{
 		/* Gigabyte M912 */
 		.matches = {
-- 
2.43.0