[PATCH 1/2] dt-bindings: input: i2c-hid: Introduce FocalTech FT8112

[PATCH 1/2] dt-bindings: input: i2c-hid: Introduce FocalTech FT8112

[daniel_peng]

From: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>

The FocalTech FT8112 touch screen chip same as Ilitek ili2901 controller
has a reset gpio. The difference is that they have different
post_gpio_reset_on_delay_ms.
FocalTech FT8112 also uses 3.3V power supply.

Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
---

 .../bindings/input/focaltech,ft8112.yaml      | 66 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/focaltech,ft8112.yaml

diff --git a/Documentation/devicetree/bindings/input/focaltech,ft8112.yaml b/Documentation/devicetree/bindings/input/focaltech,ft8112.yaml
new file mode 100644
index 000000000000..114288787c98
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/focaltech,ft8112.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/focaltech,ft8112.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FocalTech FT8112 touchscreen controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+description:
+  Supports the FocalTech FT8112 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - focaltech,ft8112
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc33-supply: true
+
+  vccio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@38 {
+        compatible = "focaltech,ft8112";
+        reg = <0x38>;
+
+        interrupt-parent = <&pio>;
+        interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&pio 126 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_tchscr_x>;
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index ddecf1ef3bed..69f54515fe98 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12326,6 +12326,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 F:	Documentation/devicetree/bindings/input/
 F:	Documentation/devicetree/bindings/serio/
 F:	Documentation/input/
+F:	drivers/hid/
 F:	drivers/input/
 F:	include/dt-bindings/input/
 F:	include/linux/gameport.h
-- 
2.34.1

[PATCH 2/2] HID: i2c-hid: Add new FocalTech Touchscreen Chip

[daniel_peng]

From: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>

Information for touchscreen model HKO/RB116AS01-2 as below:
- HID :FTSC1000
- slave address:0X38
- Interface:HID over I2C
- Touch control lC:FT8112
- I2C ID: PNP0C50

Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
---

 drivers/hid/i2c-hid/i2c-hid-of-elan.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/hid/i2c-hid/i2c-hid-of-elan.c b/drivers/hid/i2c-hid/i2c-hid-of-elan.c
index 0215f217f6d8..b81fcc6ff49e 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of-elan.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of-elan.c
@@ -168,6 +168,13 @@ static const struct elan_i2c_hid_chip_data elan_ekth6a12nay_chip_data = {
 	.power_after_backlight = true,
 };
 
+static const struct elan_i2c_hid_chip_data focaltech_ft8112_chip_data = {
+	.post_power_delay_ms = 10,
+	.post_gpio_reset_on_delay_ms = 150,
+	.hid_descriptor_address = 0x0001,
+	.main_supply_name = "vcc33",
+};
+
 static const struct elan_i2c_hid_chip_data ilitek_ili9882t_chip_data = {
 	.post_power_delay_ms = 1,
 	.post_gpio_reset_on_delay_ms = 200,
@@ -191,6 +198,7 @@ static const struct elan_i2c_hid_chip_data ilitek_ili2901_chip_data = {
 static const struct of_device_id elan_i2c_hid_of_match[] = {
 	{ .compatible = "elan,ekth6915", .data = &elan_ekth6915_chip_data },
 	{ .compatible = "elan,ekth6a12nay", .data = &elan_ekth6a12nay_chip_data },
+	{ .compatible = "focaltech,ft8112", .data = &focaltech_ft8112_chip_data },
 	{ .compatible = "ilitek,ili9882t", .data = &ilitek_ili9882t_chip_data },
 	{ .compatible = "ilitek,ili2901", .data = &ilitek_ili2901_chip_data },
 	{ }
-- 
2.34.1

Re: [PATCH 1/2] dt-bindings: input: i2c-hid: Introduce FocalTech FT8112

[Krzysztof Kozlowski]

On Tue, Nov 11, 2025 at 02:38:59PM +0800, daniel_peng@pegatron.corp-partner.google.com wrote:
> From: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
> 
> The FocalTech FT8112 touch screen chip same as Ilitek ili2901 controller
> has a reset gpio. The difference is that they have different
> post_gpio_reset_on_delay_ms.
> FocalTech FT8112 also uses 3.3V power supply.
> 
> Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>

You already sent this v1! And received review there.

Don't send duplicates. Instead version your patches properly and respond
to review at v1. Next patchset will be v3.

Anyway, this patch has the same issues as before, also bounced from your
own Google servers as spam.

You send it through Google, so at least you could be sure that Google
servers accept your own patches.

Best regards,
Krzysztof