Linux Input/HID development
 help / color / mirror / Atom feed
From: Vladimir Zapolskiy <vz@mleia.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>,
	"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
	"Signed-off-by : Lee Jones" <lee@kernel.org>,
	linux-input@vger.kernel.org
Subject: [PATCH] Input: adp5589: remove a leftover header file
Date: Tue, 13 Jan 2026 17:11:40 +0200	[thread overview]
Message-ID: <20260113151140.3843753-1-vz@mleia.com> (raw)

In commit 3bdbd0858df6 ("Input: adp5589: remove the driver") the last user
of include/linux/input/adp5589.h was removed along with the whole driver,
thus the header file can be also removed.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
---
 include/linux/input/adp5589.h | 180 ----------------------------------
 1 file changed, 180 deletions(-)
 delete mode 100644 include/linux/input/adp5589.h

diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h
deleted file mode 100644
index 0e4742c8c81e..000000000000
--- a/include/linux/input/adp5589.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller
- *
- * Copyright 2010-2011 Analog Devices Inc.
- */
-
-#ifndef _ADP5589_H
-#define _ADP5589_H
-
-/*
- * ADP5589 specific GPI and Keymap defines
- */
-
-#define ADP5589_KEYMAPSIZE	88
-
-#define ADP5589_GPI_PIN_ROW0 97
-#define ADP5589_GPI_PIN_ROW1 98
-#define ADP5589_GPI_PIN_ROW2 99
-#define ADP5589_GPI_PIN_ROW3 100
-#define ADP5589_GPI_PIN_ROW4 101
-#define ADP5589_GPI_PIN_ROW5 102
-#define ADP5589_GPI_PIN_ROW6 103
-#define ADP5589_GPI_PIN_ROW7 104
-#define ADP5589_GPI_PIN_COL0 105
-#define ADP5589_GPI_PIN_COL1 106
-#define ADP5589_GPI_PIN_COL2 107
-#define ADP5589_GPI_PIN_COL3 108
-#define ADP5589_GPI_PIN_COL4 109
-#define ADP5589_GPI_PIN_COL5 110
-#define ADP5589_GPI_PIN_COL6 111
-#define ADP5589_GPI_PIN_COL7 112
-#define ADP5589_GPI_PIN_COL8 113
-#define ADP5589_GPI_PIN_COL9 114
-#define ADP5589_GPI_PIN_COL10 115
-#define GPI_LOGIC1 116
-#define GPI_LOGIC2 117
-
-#define ADP5589_GPI_PIN_ROW_BASE ADP5589_GPI_PIN_ROW0
-#define ADP5589_GPI_PIN_ROW_END ADP5589_GPI_PIN_ROW7
-#define ADP5589_GPI_PIN_COL_BASE ADP5589_GPI_PIN_COL0
-#define ADP5589_GPI_PIN_COL_END ADP5589_GPI_PIN_COL10
-
-#define ADP5589_GPI_PIN_BASE ADP5589_GPI_PIN_ROW_BASE
-#define ADP5589_GPI_PIN_END ADP5589_GPI_PIN_COL_END
-
-#define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1)
-
-/*
- * ADP5585 specific GPI and Keymap defines
- */
-
-#define ADP5585_KEYMAPSIZE	30
-
-#define ADP5585_GPI_PIN_ROW0 37
-#define ADP5585_GPI_PIN_ROW1 38
-#define ADP5585_GPI_PIN_ROW2 39
-#define ADP5585_GPI_PIN_ROW3 40
-#define ADP5585_GPI_PIN_ROW4 41
-#define ADP5585_GPI_PIN_ROW5 42
-#define ADP5585_GPI_PIN_COL0 43
-#define ADP5585_GPI_PIN_COL1 44
-#define ADP5585_GPI_PIN_COL2 45
-#define ADP5585_GPI_PIN_COL3 46
-#define ADP5585_GPI_PIN_COL4 47
-#define GPI_LOGIC 48
-
-#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0
-#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5
-#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0
-#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4
-
-#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE
-#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END
-
-#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1)
-
-struct adp5589_gpi_map {
-	unsigned short pin;
-	unsigned short sw_evt;
-};
-
-/* scan_cycle_time */
-#define ADP5589_SCAN_CYCLE_10ms		0
-#define ADP5589_SCAN_CYCLE_20ms		1
-#define ADP5589_SCAN_CYCLE_30ms		2
-#define ADP5589_SCAN_CYCLE_40ms		3
-
-/* RESET_CFG */
-#define RESET_PULSE_WIDTH_500us		0
-#define RESET_PULSE_WIDTH_1ms		1
-#define RESET_PULSE_WIDTH_2ms		2
-#define RESET_PULSE_WIDTH_10ms		3
-
-#define RESET_TRIG_TIME_0ms		(0 << 2)
-#define RESET_TRIG_TIME_1000ms		(1 << 2)
-#define RESET_TRIG_TIME_1500ms		(2 << 2)
-#define RESET_TRIG_TIME_2000ms		(3 << 2)
-#define RESET_TRIG_TIME_2500ms		(4 << 2)
-#define RESET_TRIG_TIME_3000ms		(5 << 2)
-#define RESET_TRIG_TIME_3500ms		(6 << 2)
-#define RESET_TRIG_TIME_4000ms		(7 << 2)
-
-#define RESET_PASSTHRU_EN		(1 << 5)
-#define RESET1_POL_HIGH			(1 << 6)
-#define RESET1_POL_LOW			(0 << 6)
-#define RESET2_POL_HIGH			(1 << 7)
-#define RESET2_POL_LOW			(0 << 7)
-
-/* ADP5589 Mask Bits:
- * C C C C C C C C C C C | R R R R R R R R
- * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0
- * 0
- * ---------------- BIT ------------------
- * 1 1 1 1 1 1 1 1 1 0 0 | 0 0 0 0 0 0 0 0
- * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0
- */
-
-#define ADP_ROW(x)	(1 << (x))
-#define ADP_COL(x)	(1 << (x + 8))
-#define ADP5589_ROW_MASK		0xFF
-#define ADP5589_COL_MASK		0xFF
-#define ADP5589_COL_SHIFT		8
-#define ADP5589_MAX_ROW_NUM		7
-#define ADP5589_MAX_COL_NUM		10
-
-/* ADP5585 Mask Bits:
- * C C C C C | R R R R R R
- * 4 3 2 1 0 | 5 4 3 2 1 0
- *
- * ---- BIT -- -----------
- * 1 0 0 0 0 | 0 0 0 0 0 0
- * 0 9 8 7 6 | 5 4 3 2 1 0
- */
-
-#define ADP5585_ROW_MASK		0x3F
-#define ADP5585_COL_MASK		0x1F
-#define ADP5585_ROW_SHIFT		0
-#define ADP5585_COL_SHIFT		6
-#define ADP5585_MAX_ROW_NUM		5
-#define ADP5585_MAX_COL_NUM		4
-
-#define ADP5585_ROW(x)	(1 << ((x) & ADP5585_ROW_MASK))
-#define ADP5585_COL(x)	(1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT))
-
-/* Put one of these structures in i2c_board_info platform_data */
-
-struct adp5589_kpad_platform_data {
-	unsigned keypad_en_mask;	/* Keypad (Rows/Columns) enable mask */
-	const unsigned short *keymap;	/* Pointer to keymap */
-	unsigned short keymapsize;	/* Keymap size */
-	bool repeat;			/* Enable key repeat */
-	bool en_keylock;		/* Enable key lock feature (ADP5589 only)*/
-	unsigned char unlock_key1;	/* Unlock Key 1 (ADP5589 only) */
-	unsigned char unlock_key2;	/* Unlock Key 2 (ADP5589 only) */
-	unsigned char unlock_timer;	/* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */
-	unsigned char scan_cycle_time;	/* Time between consecutive scan cycles */
-	unsigned char reset_cfg;	/* Reset config */
-	unsigned short reset1_key_1;	/* Reset Key 1 */
-	unsigned short reset1_key_2;	/* Reset Key 2 */
-	unsigned short reset1_key_3;	/* Reset Key 3 */
-	unsigned short reset2_key_1;	/* Reset Key 1 */
-	unsigned short reset2_key_2;	/* Reset Key 2 */
-	unsigned debounce_dis_mask;	/* Disable debounce mask */
-	unsigned pull_dis_mask;		/* Disable all pull resistors mask */
-	unsigned pullup_en_100k;	/* Pull-Up 100k Enable Mask */
-	unsigned pullup_en_300k;	/* Pull-Up 300k Enable Mask */
-	unsigned pulldown_en_300k;	/* Pull-Down 300k Enable Mask */
-	const struct adp5589_gpi_map *gpimap;
-	unsigned short gpimapsize;
-	const struct adp5589_gpio_platform_data *gpio_data;
-};
-
-struct i2c_client; /* forward declaration */
-
-struct adp5589_gpio_platform_data {
-	int	gpio_start;	/* GPIO Chip base # */
-};
-
-#endif
-- 
2.51.0


             reply	other threads:[~2026-01-13 15:11 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-13 15:11 Vladimir Zapolskiy [this message]
2026-01-13 15:44 ` [PATCH] Input: adp5589: remove a leftover header file Laurent Pinchart
2026-01-13 16:57 ` Nuno Sá
2026-01-14  6:43 ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260113151140.3843753-1-vz@mleia.com \
    --to=vz@mleia.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=lee@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox