From: "Nuno Sá" <noname.nuno@gmail.com>
To: Vladimir Zapolskiy <vz@mleia.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Signed-off-by : Lee Jones" <lee@kernel.org>,
linux-input@vger.kernel.org
Subject: Re: [PATCH] Input: adp5589: remove a leftover header file
Date: Tue, 13 Jan 2026 16:57:28 +0000 [thread overview]
Message-ID: <fdc6ca83e326e2438c420f7c1571c0e49fd3741b.camel@gmail.com> (raw)
In-Reply-To: <20260113151140.3843753-1-vz@mleia.com>
On Tue, 2026-01-13 at 17:11 +0200, Vladimir Zapolskiy wrote:
> In commit 3bdbd0858df6 ("Input: adp5589: remove the driver") the last user
> of include/linux/input/adp5589.h was removed along with the whole driver,
> thus the header file can be also removed.
>
> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
> ---
Thanks!
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
> include/linux/input/adp5589.h | 180 ----------------------------------
> 1 file changed, 180 deletions(-)
> delete mode 100644 include/linux/input/adp5589.h
>
> diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h
> deleted file mode 100644
> index 0e4742c8c81e..000000000000
> --- a/include/linux/input/adp5589.h
> +++ /dev/null
> @@ -1,180 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller
> - *
> - * Copyright 2010-2011 Analog Devices Inc.
> - */
> -
> -#ifndef _ADP5589_H
> -#define _ADP5589_H
> -
> -/*
> - * ADP5589 specific GPI and Keymap defines
> - */
> -
> -#define ADP5589_KEYMAPSIZE 88
> -
> -#define ADP5589_GPI_PIN_ROW0 97
> -#define ADP5589_GPI_PIN_ROW1 98
> -#define ADP5589_GPI_PIN_ROW2 99
> -#define ADP5589_GPI_PIN_ROW3 100
> -#define ADP5589_GPI_PIN_ROW4 101
> -#define ADP5589_GPI_PIN_ROW5 102
> -#define ADP5589_GPI_PIN_ROW6 103
> -#define ADP5589_GPI_PIN_ROW7 104
> -#define ADP5589_GPI_PIN_COL0 105
> -#define ADP5589_GPI_PIN_COL1 106
> -#define ADP5589_GPI_PIN_COL2 107
> -#define ADP5589_GPI_PIN_COL3 108
> -#define ADP5589_GPI_PIN_COL4 109
> -#define ADP5589_GPI_PIN_COL5 110
> -#define ADP5589_GPI_PIN_COL6 111
> -#define ADP5589_GPI_PIN_COL7 112
> -#define ADP5589_GPI_PIN_COL8 113
> -#define ADP5589_GPI_PIN_COL9 114
> -#define ADP5589_GPI_PIN_COL10 115
> -#define GPI_LOGIC1 116
> -#define GPI_LOGIC2 117
> -
> -#define ADP5589_GPI_PIN_ROW_BASE ADP5589_GPI_PIN_ROW0
> -#define ADP5589_GPI_PIN_ROW_END ADP5589_GPI_PIN_ROW7
> -#define ADP5589_GPI_PIN_COL_BASE ADP5589_GPI_PIN_COL0
> -#define ADP5589_GPI_PIN_COL_END ADP5589_GPI_PIN_COL10
> -
> -#define ADP5589_GPI_PIN_BASE ADP5589_GPI_PIN_ROW_BASE
> -#define ADP5589_GPI_PIN_END ADP5589_GPI_PIN_COL_END
> -
> -#define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1)
> -
> -/*
> - * ADP5585 specific GPI and Keymap defines
> - */
> -
> -#define ADP5585_KEYMAPSIZE 30
> -
> -#define ADP5585_GPI_PIN_ROW0 37
> -#define ADP5585_GPI_PIN_ROW1 38
> -#define ADP5585_GPI_PIN_ROW2 39
> -#define ADP5585_GPI_PIN_ROW3 40
> -#define ADP5585_GPI_PIN_ROW4 41
> -#define ADP5585_GPI_PIN_ROW5 42
> -#define ADP5585_GPI_PIN_COL0 43
> -#define ADP5585_GPI_PIN_COL1 44
> -#define ADP5585_GPI_PIN_COL2 45
> -#define ADP5585_GPI_PIN_COL3 46
> -#define ADP5585_GPI_PIN_COL4 47
> -#define GPI_LOGIC 48
> -
> -#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0
> -#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5
> -#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0
> -#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4
> -
> -#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE
> -#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END
> -
> -#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1)
> -
> -struct adp5589_gpi_map {
> - unsigned short pin;
> - unsigned short sw_evt;
> -};
> -
> -/* scan_cycle_time */
> -#define ADP5589_SCAN_CYCLE_10ms 0
> -#define ADP5589_SCAN_CYCLE_20ms 1
> -#define ADP5589_SCAN_CYCLE_30ms 2
> -#define ADP5589_SCAN_CYCLE_40ms 3
> -
> -/* RESET_CFG */
> -#define RESET_PULSE_WIDTH_500us 0
> -#define RESET_PULSE_WIDTH_1ms 1
> -#define RESET_PULSE_WIDTH_2ms 2
> -#define RESET_PULSE_WIDTH_10ms 3
> -
> -#define RESET_TRIG_TIME_0ms (0 << 2)
> -#define RESET_TRIG_TIME_1000ms (1 << 2)
> -#define RESET_TRIG_TIME_1500ms (2 << 2)
> -#define RESET_TRIG_TIME_2000ms (3 << 2)
> -#define RESET_TRIG_TIME_2500ms (4 << 2)
> -#define RESET_TRIG_TIME_3000ms (5 << 2)
> -#define RESET_TRIG_TIME_3500ms (6 << 2)
> -#define RESET_TRIG_TIME_4000ms (7 << 2)
> -
> -#define RESET_PASSTHRU_EN (1 << 5)
> -#define RESET1_POL_HIGH (1 << 6)
> -#define RESET1_POL_LOW (0 << 6)
> -#define RESET2_POL_HIGH (1 << 7)
> -#define RESET2_POL_LOW (0 << 7)
> -
> -/* ADP5589 Mask Bits:
> - * C C C C C C C C C C C | R R R R R R R R
> - * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0
> - * 0
> - * ---------------- BIT ------------------
> - * 1 1 1 1 1 1 1 1 1 0 0 | 0 0 0 0 0 0 0 0
> - * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0
> - */
> -
> -#define ADP_ROW(x) (1 << (x))
> -#define ADP_COL(x) (1 << (x + 8))
> -#define ADP5589_ROW_MASK 0xFF
> -#define ADP5589_COL_MASK 0xFF
> -#define ADP5589_COL_SHIFT 8
> -#define ADP5589_MAX_ROW_NUM 7
> -#define ADP5589_MAX_COL_NUM 10
> -
> -/* ADP5585 Mask Bits:
> - * C C C C C | R R R R R R
> - * 4 3 2 1 0 | 5 4 3 2 1 0
> - *
> - * ---- BIT -- -----------
> - * 1 0 0 0 0 | 0 0 0 0 0 0
> - * 0 9 8 7 6 | 5 4 3 2 1 0
> - */
> -
> -#define ADP5585_ROW_MASK 0x3F
> -#define ADP5585_COL_MASK 0x1F
> -#define ADP5585_ROW_SHIFT 0
> -#define ADP5585_COL_SHIFT 6
> -#define ADP5585_MAX_ROW_NUM 5
> -#define ADP5585_MAX_COL_NUM 4
> -
> -#define ADP5585_ROW(x) (1 << ((x) & ADP5585_ROW_MASK))
> -#define ADP5585_COL(x) (1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT))
> -
> -/* Put one of these structures in i2c_board_info platform_data */
> -
> -struct adp5589_kpad_platform_data {
> - unsigned keypad_en_mask; /* Keypad (Rows/Columns) enable mask */
> - const unsigned short *keymap; /* Pointer to keymap */
> - unsigned short keymapsize; /* Keymap size */
> - bool repeat; /* Enable key repeat */
> - bool en_keylock; /* Enable key lock feature (ADP5589 only)*/
> - unsigned char unlock_key1; /* Unlock Key 1 (ADP5589 only) */
> - unsigned char unlock_key2; /* Unlock Key 2 (ADP5589 only) */
> - unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys
> 0=disable (ADP5589 only) */
> - unsigned char scan_cycle_time; /* Time between consecutive scan cycles */
> - unsigned char reset_cfg; /* Reset config */
> - unsigned short reset1_key_1; /* Reset Key 1 */
> - unsigned short reset1_key_2; /* Reset Key 2 */
> - unsigned short reset1_key_3; /* Reset Key 3 */
> - unsigned short reset2_key_1; /* Reset Key 1 */
> - unsigned short reset2_key_2; /* Reset Key 2 */
> - unsigned debounce_dis_mask; /* Disable debounce mask */
> - unsigned pull_dis_mask; /* Disable all pull resistors mask */
> - unsigned pullup_en_100k; /* Pull-Up 100k Enable Mask */
> - unsigned pullup_en_300k; /* Pull-Up 300k Enable Mask */
> - unsigned pulldown_en_300k; /* Pull-Down 300k Enable Mask */
> - const struct adp5589_gpi_map *gpimap;
> - unsigned short gpimapsize;
> - const struct adp5589_gpio_platform_data *gpio_data;
> -};
> -
> -struct i2c_client; /* forward declaration */
> -
> -struct adp5589_gpio_platform_data {
> - int gpio_start; /* GPIO Chip base # */
> -};
> -
> -#endif
next prev parent reply other threads:[~2026-01-13 16:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-13 15:11 [PATCH] Input: adp5589: remove a leftover header file Vladimir Zapolskiy
2026-01-13 15:44 ` Laurent Pinchart
2026-01-13 16:57 ` Nuno Sá [this message]
2026-01-14 6:43 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fdc6ca83e326e2438c420f7c1571c0e49fd3741b.camel@gmail.com \
--to=noname.nuno@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=vz@mleia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox