* [PATCH v4 1/3] HID: nintendo: Add preliminary Switch 2 controller driver
2026-04-15 7:31 [PATCH v4 0/3] HID: nintendo: Add preliminary Switch 2 controller driver Vicki Pfau
@ 2026-04-15 7:31 ` Vicki Pfau
2026-04-15 7:31 ` [PATCH v4 2/3] HID: nintendo: Add rumble support for Switch 2 controllers Vicki Pfau
2026-04-15 7:31 ` [PATCH v4 3/3] HID: nintendo: Add unified report format support Vicki Pfau
2 siblings, 0 replies; 4+ messages in thread
From: Vicki Pfau @ 2026-04-15 7:31 UTC (permalink / raw)
To: Dmitry Torokhov, Jiri Kosina, Benjamin Tissoires, linux-input; +Cc: Vicki Pfau
This adds a new driver for the Switch 2 controllers. The Switch 2 uses an
unusual split-interface design such that input and rumble occur on the main
HID interface, but all other communication occurs over a "configuration"
interface. This is the case on both USB and Bluetooth, so this new driver
uses a split-driver design with the HID interface being the "main" driver
and the configuration interface is a secondary driver that looks up to the
HID interface, sharing resources on a common struct.
Due to using a non-standard pairing interface as well as Bluetooth
communications being extremely limited in the kernel, a custom interface
between userspace and the kernel will need to be designed, along with
bringup in BlueZ. That is beyond the scope of this initial patch, which
only contains the generic HID and USB configuration interface drivers.
This initial work supports general input for the Joy-Con 2, Pro Controller
2, and GameCube NSO controllers. IMU, rumble and battery support is not yet
present.
Signed-off-by: Vicki Pfau <vi@endrift.com>
---
MAINTAINERS | 1 +
drivers/hid/Kconfig | 11 +-
drivers/hid/hid-ids.h | 4 +
drivers/hid/hid-nintendo.c | 1194 ++++++++++++++++-
drivers/hid/hid-nintendo.h | 72 +
drivers/input/joystick/Kconfig | 11 +
drivers/input/joystick/Makefile | 1 +
drivers/input/joystick/nintendo-switch2-usb.c | 353 +++++
8 files changed, 1637 insertions(+), 10 deletions(-)
create mode 100644 drivers/hid/hid-nintendo.h
create mode 100644 drivers/input/joystick/nintendo-switch2-usb.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 7b277d5bf3d1..4d1a28df5fd2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18743,6 +18743,7 @@ F: drivers/scsi/nsp32*
NINTENDO HID DRIVER
M: Daniel J. Ogorchock <djogorchock@gmail.com>
+M: Vicki Pfau <vi@endrift.com>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/hid/hid-nintendo*
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index c1d9f7c6a5f2..1a293a6c02c2 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -826,10 +826,13 @@ config HID_NINTENDO
depends on LEDS_CLASS
select POWER_SUPPLY
help
- Adds support for the Nintendo Switch Joy-Cons, NSO, Pro Controller.
- All controllers support bluetooth, and the Pro Controller also supports
- its USB mode. This also includes support for the Nintendo Switch Online
- Controllers which include the NES, Genesis, SNES, and N64 controllers.
+ Adds support for the Nintendo Switch Joy-Cons, NSO, Pro Controller, as
+ well as Nintendo Switch 2 Joy-Cons, Pro Controller, and NSO GameCube
+ controllers. All Switch controllers support bluetooth, and the Pro
+ Controller also supports its USB mode. This also includes support for
+ the Nintendo Switch Online Controllers which include the NES, Genesis,
+ SNES, and N64 controllers. Switch 2 controllers currently only support
+ USB mode.
To compile this driver as a module, choose M here: the
module will be called hid-nintendo.
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4ab7640b119a..a794dad7980f 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1073,6 +1073,10 @@
#define USB_DEVICE_ID_NINTENDO_SNESCON 0x2017
#define USB_DEVICE_ID_NINTENDO_GENCON 0x201e
#define USB_DEVICE_ID_NINTENDO_N64CON 0x2019
+#define USB_DEVICE_ID_NINTENDO_NS2_JOYCONR 0x2066
+#define USB_DEVICE_ID_NINTENDO_NS2_JOYCONL 0x2067
+#define USB_DEVICE_ID_NINTENDO_NS2_PROCON 0x2069
+#define USB_DEVICE_ID_NINTENDO_NS2_GCCON 0x2073
#define USB_VENDOR_ID_NOVATEK 0x0603
#define USB_DEVICE_ID_NOVATEK_PCT 0x0600
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 29008c2cc530..ac84e32ed0bd 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -1,11 +1,13 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * HID driver for Nintendo Switch Joy-Cons and Pro Controllers
+ * HID driver for Nintendo Switch Joy-Cons and Pro Controllers, as well as
+ * Nintendo Switch 2 Joy-Cons, Pro Controller, and GameCube Controller
*
* Copyright (c) 2019-2021 Daniel J. Ogorchock <djogorchock@gmail.com>
* Portions Copyright (c) 2020 Nadia Holmquist Pedersen <nadia@nhp.sh>
* Copyright (c) 2022 Emily Strickland <linux@emily.st>
* Copyright (c) 2023 Ryan McClelland <rymcclel@gmail.com>
+ * Copyright (c) 2026 Valve Software
*
* The following resources/projects were referenced for this driver:
* https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
@@ -13,6 +15,8 @@
* https://github.com/FrotBot/SwitchProConLinuxUSB
* https://github.com/MTCKC/ProconXInput
* https://github.com/Davidobot/BetterJoyForCemu
+ * https://gist.github.com/shinyquagsire23/66f006b46c56216acbaac6c1e2279b64
+ * https://github.com/ndeadly/switch2_controller_research
* hid-wiimote kernel hid driver
* hid-logitech-hidpp driver
* hid-sony driver
@@ -29,6 +33,7 @@
*/
#include "hid-ids.h"
+#include "hid-nintendo.h"
#include <linux/unaligned.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -41,6 +46,8 @@
#include <linux/module.h>
#include <linux/power_supply.h>
#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
/*
* Reference the url below for the following HID report defines:
@@ -2614,7 +2621,7 @@ static int joycon_ctlr_handle_event(struct joycon_ctlr *ctlr, u8 *data,
return ret;
}
-static int nintendo_hid_event(struct hid_device *hdev,
+static int joycon_event(struct hid_device *hdev,
struct hid_report *report, u8 *raw_data, int size)
{
struct joycon_ctlr *ctlr = hid_get_drvdata(hdev);
@@ -2625,7 +2632,7 @@ static int nintendo_hid_event(struct hid_device *hdev,
return joycon_ctlr_handle_event(ctlr, raw_data, size);
}
-static int nintendo_hid_probe(struct hid_device *hdev,
+static int joycon_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
int ret;
@@ -2729,7 +2736,7 @@ static int nintendo_hid_probe(struct hid_device *hdev,
return ret;
}
-static void nintendo_hid_remove(struct hid_device *hdev)
+static void joycon_remove(struct hid_device *hdev)
{
struct joycon_ctlr *ctlr = hid_get_drvdata(hdev);
unsigned long flags;
@@ -2748,7 +2755,9 @@ static void nintendo_hid_remove(struct hid_device *hdev)
hid_hw_stop(hdev);
}
-static int nintendo_hid_resume(struct hid_device *hdev)
+#ifdef CONFIG_PM
+
+static int joycon_resume(struct hid_device *hdev)
{
struct joycon_ctlr *ctlr = hid_get_drvdata(hdev);
int ret;
@@ -2771,7 +2780,7 @@ static int nintendo_hid_resume(struct hid_device *hdev)
return ret;
}
-static int nintendo_hid_suspend(struct hid_device *hdev, pm_message_t message)
+static int joycon_suspend(struct hid_device *hdev, pm_message_t message)
{
struct joycon_ctlr *ctlr = hid_get_drvdata(hdev);
@@ -2790,7 +2799,1120 @@ static int nintendo_hid_suspend(struct hid_device *hdev, pm_message_t message)
return 0;
}
+#endif
+
+/*
+ * =============================================================================
+ * Switch 2 support
+ * =============================================================================
+ */
+#define NS2_BTNR_B BIT(0)
+#define NS2_BTNR_A BIT(1)
+#define NS2_BTNR_Y BIT(2)
+#define NS2_BTNR_X BIT(3)
+#define NS2_BTNR_R BIT(4)
+#define NS2_BTNR_ZR BIT(5)
+#define NS2_BTNR_PLUS BIT(6)
+#define NS2_BTNR_RS BIT(7)
+
+#define NS2_BTNL_DOWN BIT(0)
+#define NS2_BTNL_RIGHT BIT(1)
+#define NS2_BTNL_LEFT BIT(2)
+#define NS2_BTNL_UP BIT(3)
+#define NS2_BTNL_L BIT(4)
+#define NS2_BTNL_ZL BIT(5)
+#define NS2_BTNL_MINUS BIT(6)
+#define NS2_BTNL_LS BIT(7)
+
+#define NS2_BTN3_C BIT(4)
+#define NS2_BTN3_SR BIT(6)
+#define NS2_BTN3_SL BIT(7)
+
+#define NS2_BTN_JCR_HOME BIT(0)
+#define NS2_BTN_JCR_GR BIT(2)
+#define NS2_BTN_JCR_C NS2_BTN3_C
+#define NS2_BTN_JCR_SR NS2_BTN3_SR
+#define NS2_BTN_JCR_SL NS2_BTN3_SL
+
+#define NS2_BTN_JCL_CAPTURE BIT(0)
+#define NS2_BTN_JCL_GL BIT(2)
+#define NS2_BTN_JCL_SR NS2_BTN3_SR
+#define NS2_BTN_JCL_SL NS2_BTN3_SL
+
+#define NS2_BTN_PRO_HOME BIT(0)
+#define NS2_BTN_PRO_CAPTURE BIT(1)
+#define NS2_BTN_PRO_GR BIT(2)
+#define NS2_BTN_PRO_GL BIT(3)
+#define NS2_BTN_PRO_C NS2_BTN3_C
+
+#define NS2_BTN_GC_HOME BIT(0)
+#define NS2_BTN_GC_CAPTURE BIT(1)
+#define NS2_BTN_GC_C NS2_BTN3_C
+
+#define NS2_TRIGGER_RANGE 4095
+#define NS2_AXIS_MIN -32768
+#define NS2_AXIS_MAX 32767
+
+#define NS2_MAX_PLAYER_ID 8
+
+#define NS2_MAX_INIT_RETRIES 4
+
+#define NS2_FLASH_ADDR_SERIAL 0x13002
+#define NS2_FLASH_ADDR_FACTORY_PRIMARY_CALIB 0x130a8
+#define NS2_FLASH_ADDR_FACTORY_SECONDARY_CALIB 0x130e8
+#define NS2_FLASH_ADDR_FACTORY_TRIGGER_CALIB 0x13140
+#define NS2_FLASH_ADDR_USER_PRIMARY_CALIB 0x1fc040
+#define NS2_FLASH_ADDR_USER_SECONDARY_CALIB 0x1fc080
+
+#define NS2_FLASH_SIZE_SERIAL 0x10
+#define NS2_FLASH_SIZE_FACTORY_AXIS_CALIB 9
+#define NS2_FLASH_SIZE_FACTORY_TRIGGER_CALIB 2
+#define NS2_FLASH_SIZE_USER_AXIS_CALIB 11
+
+#define NS2_USER_CALIB_MAGIC 0xa1b2
+
+#define NS2_FEATURE_BUTTONS BIT(0)
+#define NS2_FEATURE_ANALOG BIT(1)
+#define NS2_FEATURE_IMU BIT(2)
+#define NS2_FEATURE_MOUSE BIT(4)
+#define NS2_FEATURE_RUMBLE BIT(5)
+#define NS2_FEATURE_MAGNETO BIT(7)
+
+enum switch2_subcmd_flash {
+ NS2_SUBCMD_FLASH_READ_BLOCK = 0x01,
+ NS2_SUBCMD_FLASH_WRITE_BLOCK = 0x02,
+ NS2_SUBCMD_FLASH_ERASE_BLOCK = 0x03,
+ NS2_SUBCMD_FLASH_READ = 0x04,
+ NS2_SUBCMD_FLASH_WRITE = 0x05,
+};
+
+enum switch2_subcmd_init {
+ NS2_SUBCMD_INIT_SELECT_REPORT = 0xa,
+ NS2_SUBCMD_INIT_USB = 0xd,
+};
+
+enum switch2_subcmd_feature_select {
+ NS2_SUBCMD_FEATSEL_GET_INFO = 0x1,
+ NS2_SUBCMD_FEATSEL_SET_MASK = 0x2,
+ NS2_SUBCMD_FEATSEL_CLEAR_MASK = 0x3,
+ NS2_SUBCMD_FEATSEL_ENABLE = 0x4,
+ NS2_SUBCMD_FEATSEL_DISABLE = 0x5,
+};
+
+enum switch2_subcmd_grip {
+ NS2_SUBCMD_GRIP_GET_INFO = 0x1,
+ NS2_SUBCMD_GRIP_ENABLE_BUTTONS = 0x2,
+ NS2_SUBCMD_GRIP_GET_INFO_EXT = 0x3,
+};
+
+enum switch2_subcmd_led {
+ NS2_SUBCMD_LED_P1 = 0x1,
+ NS2_SUBCMD_LED_P2 = 0x2,
+ NS2_SUBCMD_LED_P3 = 0x3,
+ NS2_SUBCMD_LED_P4 = 0x4,
+ NS2_SUBCMD_LED_ALL_ON = 0x5,
+ NS2_SUBCMD_LED_ALL_OFF = 0x6,
+ NS2_SUBCMD_LED_PATTERN = 0x7,
+ NS2_SUBCMD_LED_BLINK = 0x8,
+};
+
+enum switch2_subcmd_fw_info {
+ NS2_SUBCMD_FW_INFO_GET = 0x1,
+};
+
+enum switch2_ctlr_type {
+ NS2_CTLR_TYPE_JCL = 0x00,
+ NS2_CTLR_TYPE_JCR = 0x01,
+ NS2_CTLR_TYPE_PRO = 0x02,
+ NS2_CTLR_TYPE_GC = 0x03,
+};
+
+enum switch2_report_id {
+ NS2_REPORT_UNIFIED = 0x05,
+ NS2_REPORT_JCL = 0x07,
+ NS2_REPORT_JCR = 0x08,
+ NS2_REPORT_PRO = 0x09,
+ NS2_REPORT_GC = 0x0a,
+};
+
+enum switch2_init_step {
+ NS2_INIT_READ_SERIAL,
+ NS2_INIT_GET_FIRMWARE_INFO,
+ NS2_INIT_READ_FACTORY_PRIMARY_CALIB,
+ NS2_INIT_READ_FACTORY_SECONDARY_CALIB,
+ NS2_INIT_READ_FACTORY_TRIGGER_CALIB,
+ NS2_INIT_READ_USER_PRIMARY_CALIB,
+ NS2_INIT_READ_USER_SECONDARY_CALIB,
+ NS2_INIT_SET_FEATURE_MASK,
+ NS2_INIT_ENABLE_FEATURES,
+ NS2_INIT_GRIP_BUTTONS,
+ NS2_INIT_REPORT_FORMAT,
+ NS2_INIT_SET_PLAYER_LEDS,
+ NS2_INIT_INPUT,
+ NS2_INIT_FINISH,
+ NS2_INIT_DONE,
+};
+
+struct switch2_version_info {
+ uint8_t major;
+ uint8_t minor;
+ uint8_t patch;
+ uint8_t ctlr_type;
+ __le32 unk;
+ int8_t dsp_major;
+ int8_t dsp_minor;
+ int8_t dsp_patch;
+ int8_t dsp_type;
+};
+
+struct switch2_axis_calibration {
+ uint16_t neutral;
+ uint16_t negative;
+ uint16_t positive;
+};
+
+struct switch2_stick_calibration {
+ struct switch2_axis_calibration x;
+ struct switch2_axis_calibration y;
+};
+
+struct switch2_controller {
+ struct hid_device *hdev;
+ struct switch2_cfg_intf *cfg;
+
+ char name[64];
+ char phys[64];
+ struct list_head entry;
+ struct mutex lock;
+
+ enum switch2_ctlr_type ctlr_type;
+ enum switch2_init_step init_step;
+ struct input_dev __rcu *input;
+ char serial[NS2_FLASH_SIZE_SERIAL + 1];
+ struct switch2_version_info version;
+
+ struct switch2_stick_calibration stick_calib[2];
+ uint8_t lt_zero;
+ uint8_t rt_zero;
+
+ uint32_t player_id;
+ struct led_classdev leds[4];
+};
+
+static DEFINE_MUTEX(switch2_controllers_lock);
+static LIST_HEAD(switch2_controllers);
+
+struct switch2_ctlr_button_mapping {
+ uint32_t code;
+ int byte;
+ uint32_t bit;
+};
+
+static const struct switch2_ctlr_button_mapping ns2_left_joycon_button_mappings[] = {
+ { BTN_DPAD_LEFT, 0, NS2_BTNL_LEFT, },
+ { BTN_DPAD_UP, 0, NS2_BTNL_UP, },
+ { BTN_DPAD_DOWN, 0, NS2_BTNL_DOWN, },
+ { BTN_DPAD_RIGHT, 0, NS2_BTNL_RIGHT, },
+ { BTN_TL, 0, NS2_BTNL_L, },
+ { BTN_TL2, 0, NS2_BTNL_ZL, },
+ { BTN_SELECT, 0, NS2_BTNL_MINUS, },
+ { BTN_THUMBL, 0, NS2_BTNL_LS, },
+ { KEY_RECORD, 1, NS2_BTN_JCL_CAPTURE, },
+ { BTN_GRIPR, 1, NS2_BTN_JCL_SL, },
+ { BTN_GRIPR2, 1, NS2_BTN_JCL_SR, },
+ { BTN_GRIPL, 1, NS2_BTN_JCL_GL, },
+ { /* sentinel */ },
+};
+
+static const struct switch2_ctlr_button_mapping ns2_right_joycon_button_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTNR_A, },
+ { BTN_EAST, 0, NS2_BTNR_B, },
+ { BTN_NORTH, 0, NS2_BTNR_X, },
+ { BTN_WEST, 0, NS2_BTNR_Y, },
+ { BTN_TR, 0, NS2_BTNR_R, },
+ { BTN_TR2, 0, NS2_BTNR_ZR, },
+ { BTN_START, 0, NS2_BTNR_PLUS, },
+ { BTN_THUMBR, 0, NS2_BTNR_RS, },
+ { BTN_C, 1, NS2_BTN_JCR_C, },
+ { BTN_MODE, 1, NS2_BTN_JCR_HOME, },
+ { BTN_GRIPL2, 1, NS2_BTN_JCR_SL, },
+ { BTN_GRIPL, 1, NS2_BTN_JCR_SR, },
+ { BTN_GRIPR, 1, NS2_BTN_JCR_GR, },
+ { /* sentinel */ },
+};
+
+static const struct switch2_ctlr_button_mapping ns2_procon_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTNR_A, },
+ { BTN_EAST, 0, NS2_BTNR_B, },
+ { BTN_NORTH, 0, NS2_BTNR_X, },
+ { BTN_WEST, 0, NS2_BTNR_Y, },
+ { BTN_TL, 1, NS2_BTNL_L, },
+ { BTN_TR, 0, NS2_BTNR_R, },
+ { BTN_TL2, 1, NS2_BTNL_ZL, },
+ { BTN_TR2, 0, NS2_BTNR_ZR, },
+ { BTN_SELECT, 1, NS2_BTNL_MINUS, },
+ { BTN_START, 0, NS2_BTNR_PLUS, },
+ { BTN_THUMBL, 1, NS2_BTNL_LS, },
+ { BTN_THUMBR, 0, NS2_BTNR_RS, },
+ { BTN_MODE, 2, NS2_BTN_PRO_HOME },
+ { KEY_RECORD, 2, NS2_BTN_PRO_CAPTURE },
+ { BTN_GRIPR, 2, NS2_BTN_PRO_GR },
+ { BTN_GRIPL, 2, NS2_BTN_PRO_GL },
+ { BTN_C, 2, NS2_BTN_PRO_C },
+ { /* sentinel */ },
+};
+
+static const struct switch2_ctlr_button_mapping ns2_gccon_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTNR_A, },
+ { BTN_EAST, 0, NS2_BTNR_B, },
+ { BTN_NORTH, 0, NS2_BTNR_X, },
+ { BTN_WEST, 0, NS2_BTNR_Y, },
+ { BTN_TL2, 1, NS2_BTNL_L, },
+ { BTN_TR2, 0, NS2_BTNR_R, },
+ { BTN_TL, 1, NS2_BTNL_ZL, },
+ { BTN_TR, 0, NS2_BTNR_ZR, },
+ { BTN_SELECT, 1, NS2_BTNL_MINUS, },
+ { BTN_START, 0, NS2_BTNR_PLUS, },
+ { BTN_MODE, 2, NS2_BTN_GC_HOME },
+ { KEY_RECORD, 2, NS2_BTN_GC_CAPTURE },
+ { BTN_C, 2, NS2_BTN_GC_C },
+ { /* sentinel */ },
+};
+
+static const uint8_t switch2_init_cmd_data[] = {
+ /*
+ * The last 6 bytes of this packet are the MAC address of
+ * the console, but we don't need that for USB
+ */
+ 0x01, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
+};
+
+static const uint8_t switch2_one_data[] = { 0x01, 0x00, 0x00, 0x00 };
+
+static const uint8_t switch2_feature_mask[] = {
+ NS2_FEATURE_BUTTONS | NS2_FEATURE_ANALOG | NS2_FEATURE_IMU,
+ 0x00, 0x00, 0x00
+};
+
+static void switch2_init_step_done(struct switch2_controller *ns2, enum switch2_init_step step)
+{
+ if (ns2->init_step != step)
+ return;
+
+ ns2->init_step++;
+}
+
+static inline bool switch2_ctlr_is_joycon(enum switch2_ctlr_type type)
+{
+ return type == NS2_CTLR_TYPE_JCL || type == NS2_CTLR_TYPE_JCR;
+}
+
+static int switch2_set_leds(struct switch2_controller *ns2)
+{
+ int i;
+ uint8_t message[8] = { 0 };
+
+ for (i = 0; i < JC_NUM_LEDS; i++)
+ message[0] |= (!!ns2->leds[i].brightness) << i;
+
+ if (!ns2->cfg)
+ return -ENOTCONN;
+ return ns2->cfg->send_command(NS2_CMD_LED, NS2_SUBCMD_LED_PATTERN,
+ &message, sizeof(message),
+ ns2->cfg);
+}
+
+static int switch2_player_led_brightness_set(struct led_classdev *led,
+ enum led_brightness brightness)
+{
+ struct device *dev = led->dev->parent;
+ struct hid_device *hdev = to_hid_device(dev);
+ struct switch2_controller *ns2 = hid_get_drvdata(hdev);
+
+ if (!ns2)
+ return -ENODEV;
+
+ guard(mutex)(&ns2->lock);
+ return switch2_set_leds(ns2);
+}
+
+static void switch2_leds_create(struct switch2_controller *ns2)
+{
+ struct hid_device *hdev = ns2->hdev;
+ struct led_classdev *led;
+ int i;
+ int player_led_pattern;
+
+ player_led_pattern = ns2->player_id % JC_NUM_LED_PATTERNS;
+ hid_dbg(hdev, "assigned player %d led pattern", player_led_pattern + 1);
+
+ for (i = 0; i < JC_NUM_LEDS; i++) {
+ led = &ns2->leds[i];
+ led->brightness = joycon_player_led_patterns[player_led_pattern][i];
+ led->max_brightness = 1;
+ led->brightness_set_blocking = switch2_player_led_brightness_set;
+ led->flags = LED_CORE_SUSPENDRESUME | LED_HW_PLUGGABLE;
+ }
+}
+
+static void switch2_config_buttons(struct input_dev *idev,
+ const struct switch2_ctlr_button_mapping button_mappings[])
+{
+ const struct switch2_ctlr_button_mapping *button;
+
+ for (button = button_mappings; button->code; button++)
+ input_set_capability(idev, EV_KEY, button->code);
+}
+
+static int switch2_init_input(struct switch2_controller *ns2)
+{
+ struct input_dev *input;
+ struct hid_device *hdev = ns2->hdev;
+ int i;
+ int ret;
+
+ switch2_init_step_done(ns2, NS2_INIT_FINISH);
+
+ rcu_read_lock();
+ input = rcu_dereference(ns2->input);
+ rcu_read_unlock();
+
+ if (input)
+ return 0;
+
+ input = devm_input_allocate_device(&hdev->dev);
+ if (!input)
+ return -ENOMEM;
+
+ input_set_drvdata(input, ns2);
+ input->dev.parent = &hdev->dev;
+ input->id.bustype = hdev->bus;
+ input->id.vendor = hdev->vendor;
+ input->id.product = hdev->product;
+ input->id.version = hdev->version;
+ input->uniq = ns2->serial;
+ input->name = ns2->name;
+ input->phys = hdev->phys;
+
+ switch (ns2->ctlr_type) {
+ case NS2_CTLR_TYPE_JCL:
+ input_set_abs_params(input, ABS_X, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_Y, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ switch2_config_buttons(input, ns2_left_joycon_button_mappings);
+ break;
+ case NS2_CTLR_TYPE_JCR:
+ input_set_abs_params(input, ABS_X, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_Y, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ switch2_config_buttons(input, ns2_right_joycon_button_mappings);
+ break;
+ case NS2_CTLR_TYPE_GC:
+ input_set_abs_params(input, ABS_X, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_Y, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_RX, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_RY, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_Z, 0, NS2_TRIGGER_RANGE, 32, 128);
+ input_set_abs_params(input, ABS_RZ, 0, NS2_TRIGGER_RANGE, 32, 128);
+ input_set_abs_params(input, ABS_HAT0X, -1, 1, 0, 0);
+ input_set_abs_params(input, ABS_HAT0Y, -1, 1, 0, 0);
+ switch2_config_buttons(input, ns2_gccon_mappings);
+ break;
+ case NS2_CTLR_TYPE_PRO:
+ input_set_abs_params(input, ABS_X, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_Y, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_RX, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_RY, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_HAT0X, -1, 1, 0, 0);
+ input_set_abs_params(input, ABS_HAT0Y, -1, 1, 0, 0);
+ switch2_config_buttons(input, ns2_procon_mappings);
+ break;
+ default:
+ input_free_device(input);
+ return -EINVAL;
+ }
+
+ hid_info(ns2->hdev, "Firmware version %u.%u.%u (type %i)\n", ns2->version.major,
+ ns2->version.minor, ns2->version.patch, ns2->version.ctlr_type);
+ if (ns2->version.dsp_type >= 0)
+ hid_info(ns2->hdev, "DSP version %u.%u.%u\n", ns2->version.dsp_major,
+ ns2->version.dsp_minor, ns2->version.dsp_patch);
+
+ ret = input_register_device(input);
+ if (ret < 0) {
+ hid_err(ns2->hdev, "Failed to register input; ret=%d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < JC_NUM_LEDS; i++) {
+ struct led_classdev *led = &ns2->leds[i];
+ char *name = devm_kasprintf(&input->dev, GFP_KERNEL, "%s:%s:%s",
+ dev_name(&input->dev),
+ "green",
+ joycon_player_led_names[i]);
+
+ if (!name)
+ return -ENOMEM;
+
+ led->name = name;
+ ret = devm_led_classdev_register(&input->dev, led);
+ if (ret < 0) {
+ dev_err(&input->dev, "Failed to register player %d LED; ret=%d\n",
+ i + 1, ret);
+ input_unregister_device(input);
+ return ret;
+ }
+ }
+
+ rcu_assign_pointer(ns2->input, input);
+ synchronize_rcu();
+ return 0;
+}
+
+static struct switch2_controller *switch2_get_controller(const char *phys)
+{
+ struct switch2_controller *ns2;
+
+ guard(mutex)(&switch2_controllers_lock);
+ list_for_each_entry(ns2, &switch2_controllers, entry) {
+ if (strncmp(ns2->phys, phys, sizeof(ns2->phys)) == 0)
+ return ns2;
+ }
+ ns2 = kzalloc(sizeof(*ns2), GFP_KERNEL);
+ if (!ns2)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_init(&ns2->lock);
+ INIT_LIST_HEAD(&ns2->entry);
+ list_add(&ns2->entry, &switch2_controllers);
+ strscpy(ns2->phys, phys, sizeof(ns2->phys));
+ return ns2;
+}
+
+static void switch2_controller_put(struct switch2_controller *ns2)
+{
+ struct input_dev *input;
+ bool do_free;
+
+ guard(mutex)(&switch2_controllers_lock);
+ mutex_lock(&ns2->lock);
+
+ rcu_read_lock();
+ input = rcu_dereference(ns2->input);
+ rcu_read_unlock();
+
+ rcu_assign_pointer(ns2->input, NULL);
+ synchronize_rcu();
+
+ ns2->init_step = 0;
+ do_free = !ns2->hdev && !ns2->cfg;
+ mutex_unlock(&ns2->lock);
+
+ if (input)
+ input_unregister_device(input);
+
+ if (do_free) {
+ list_del_init(&ns2->entry);
+ mutex_destroy(&ns2->lock);
+ kfree(ns2);
+ }
+}
+
+static bool switch2_parse_stick_calibration(struct switch2_stick_calibration *calib,
+ const uint8_t *data)
+{
+ static const uint8_t UNCALIBRATED[9] = {
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
+ };
+ if (memcmp(UNCALIBRATED, data, sizeof(UNCALIBRATED)) == 0)
+ return false;
+
+ calib->x.neutral = data[0];
+ calib->x.neutral |= (data[1] & 0x0F) << 8;
+
+ calib->y.neutral = data[1] >> 4;
+ calib->y.neutral |= data[2] << 4;
+
+ calib->x.positive = data[3];
+ calib->x.positive |= (data[4] & 0x0F) << 8;
+
+ calib->y.positive = data[4] >> 4;
+ calib->y.positive |= data[5] << 4;
+
+ calib->x.negative = data[6];
+ calib->x.negative |= (data[7] & 0x0F) << 8;
+
+ calib->y.negative = data[7] >> 4;
+ calib->y.negative |= data[8] << 4;
+
+ return true;
+}
+
+static void switch2_handle_flash_read(struct switch2_controller *ns2, uint8_t size,
+ uint32_t address, const uint8_t *data)
+{
+ bool ok;
+
+ switch (address) {
+ case NS2_FLASH_ADDR_SERIAL:
+ if (size != NS2_FLASH_SIZE_SERIAL)
+ return;
+ memcpy(ns2->serial, data, size);
+ switch2_init_step_done(ns2, NS2_INIT_READ_SERIAL);
+ break;
+ case NS2_FLASH_ADDR_FACTORY_PRIMARY_CALIB:
+ if (size != NS2_FLASH_SIZE_FACTORY_AXIS_CALIB)
+ return;
+ switch2_init_step_done(ns2, NS2_INIT_READ_FACTORY_PRIMARY_CALIB);
+ ok = switch2_parse_stick_calibration(&ns2->stick_calib[0], data);
+ if (ok) {
+ hid_dbg(ns2->hdev, "Got factory primary stick calibration:\n");
+ hid_dbg(ns2->hdev, "Left max: %i, neutral: %i, right max: %i\n",
+ ns2->stick_calib[0].x.negative,
+ ns2->stick_calib[0].x.neutral,
+ ns2->stick_calib[0].x.positive);
+ hid_dbg(ns2->hdev, "Down max: %i, neutral: %i, up max: %i\n",
+ ns2->stick_calib[0].y.negative,
+ ns2->stick_calib[0].y.neutral,
+ ns2->stick_calib[0].y.positive);
+ } else {
+ hid_dbg(ns2->hdev, "Factory primary stick calibration not present\n");
+ }
+ break;
+ case NS2_FLASH_ADDR_FACTORY_SECONDARY_CALIB:
+ if (size != NS2_FLASH_SIZE_FACTORY_AXIS_CALIB)
+ return;
+ switch2_init_step_done(ns2, NS2_INIT_READ_FACTORY_SECONDARY_CALIB);
+ ok = switch2_parse_stick_calibration(&ns2->stick_calib[1], data);
+ if (ok) {
+ hid_dbg(ns2->hdev, "Got factory secondary stick calibration:\n");
+ hid_dbg(ns2->hdev, "Left max: %i, neutral: %i, right max: %i\n",
+ ns2->stick_calib[1].x.negative,
+ ns2->stick_calib[1].x.neutral,
+ ns2->stick_calib[1].x.positive);
+ hid_dbg(ns2->hdev, "Down max: %i, neutral: %i, up max: %i\n",
+ ns2->stick_calib[1].y.negative,
+ ns2->stick_calib[1].y.neutral,
+ ns2->stick_calib[1].y.positive);
+ } else {
+ hid_dbg(ns2->hdev, "Factory secondary stick calibration not present\n");
+ }
+ break;
+ case NS2_FLASH_ADDR_FACTORY_TRIGGER_CALIB:
+ if (size != NS2_FLASH_SIZE_FACTORY_TRIGGER_CALIB)
+ return;
+ switch2_init_step_done(ns2, NS2_INIT_READ_FACTORY_TRIGGER_CALIB);
+ if (data[0] != 0xFF && data[1] != 0xFF) {
+ ns2->lt_zero = data[0];
+ ns2->rt_zero = data[1];
+
+ hid_dbg(ns2->hdev, "Got factory trigger calibration:\n");
+ hid_dbg(ns2->hdev, "Left zero point: %i\n", ns2->lt_zero);
+ hid_dbg(ns2->hdev, "Right zero point: %i\n", ns2->rt_zero);
+ } else {
+ hid_dbg(ns2->hdev, "Factory trigger calibration not present\n");
+ }
+ break;
+ case NS2_FLASH_ADDR_USER_PRIMARY_CALIB:
+ if (size != NS2_FLASH_SIZE_USER_AXIS_CALIB)
+ return;
+ switch2_init_step_done(ns2, NS2_INIT_READ_USER_PRIMARY_CALIB);
+ if (__le16_to_cpu(*(__le16 *)data) != NS2_USER_CALIB_MAGIC) {
+ hid_dbg(ns2->hdev, "No user primary stick calibration present\n");
+ break;
+ }
+
+ ok = switch2_parse_stick_calibration(&ns2->stick_calib[0], &data[2]);
+ if (ok) {
+ hid_dbg(ns2->hdev, "Got user primary stick calibration:\n");
+ hid_dbg(ns2->hdev, "Left max: %i, neutral: %i, right max: %i\n",
+ ns2->stick_calib[0].x.negative,
+ ns2->stick_calib[0].x.neutral,
+ ns2->stick_calib[0].x.positive);
+ hid_dbg(ns2->hdev, "Down max: %i, neutral: %i, up max: %i\n",
+ ns2->stick_calib[0].y.negative,
+ ns2->stick_calib[0].y.neutral,
+ ns2->stick_calib[0].y.positive);
+ } else {
+ hid_dbg(ns2->hdev, "No user primary stick calibration present\n");
+ }
+ break;
+ case NS2_FLASH_ADDR_USER_SECONDARY_CALIB:
+ if (size != NS2_FLASH_SIZE_USER_AXIS_CALIB)
+ return;
+ switch2_init_step_done(ns2, NS2_INIT_READ_USER_SECONDARY_CALIB);
+ if (__le16_to_cpu(*(__le16 *)data) != NS2_USER_CALIB_MAGIC) {
+ hid_dbg(ns2->hdev, "No user secondary stick calibration present\n");
+ break;
+ }
+
+ ok = switch2_parse_stick_calibration(&ns2->stick_calib[1], &data[2]);
+ if (ok) {
+ hid_dbg(ns2->hdev, "Got user secondary stick calibration:\n");
+ hid_dbg(ns2->hdev, "Left max: %i, neutral: %i, right max: %i\n",
+ ns2->stick_calib[1].x.negative,
+ ns2->stick_calib[1].x.neutral,
+ ns2->stick_calib[1].x.positive);
+ hid_dbg(ns2->hdev, "Down max: %i, neutral: %i, up max: %i\n",
+ ns2->stick_calib[1].y.negative,
+ ns2->stick_calib[1].y.neutral,
+ ns2->stick_calib[1].y.positive);
+ } else {
+ hid_dbg(ns2->hdev, "No user secondary stick calibration present\n");
+ }
+ break;
+ }
+}
+
+static void switch2_report_buttons(struct input_dev *input, const uint8_t *bytes,
+ const struct switch2_ctlr_button_mapping button_mappings[])
+{
+ const struct switch2_ctlr_button_mapping *button;
+
+ for (button = button_mappings; button->code; button++)
+ input_report_key(input, button->code, bytes[button->byte] & button->bit);
+}
+
+static void switch2_report_axis(struct input_dev *input, struct switch2_axis_calibration *calib,
+ int axis, bool invert, int value)
+{
+ if (calib && calib->neutral && calib->negative && calib->positive) {
+ value -= calib->neutral;
+ value *= NS2_AXIS_MAX + 1;
+ if (value < 0)
+ value /= calib->negative;
+ else
+ value /= calib->positive;
+ } else {
+ value = (value - 2048) * 16;
+ }
+
+ if (invert)
+ value = -value;
+ input_report_abs(input, axis,
+ clamp(value, NS2_AXIS_MIN, NS2_AXIS_MAX));
+}
+
+static void switch2_report_stick(struct input_dev *input, struct switch2_stick_calibration *calib,
+ int x, bool invert_x, int y, bool invert_y, const uint8_t *data)
+{
+ switch2_report_axis(input, &calib->x, x, invert_x, data[0] | ((data[1] & 0x0F) << 8));
+ switch2_report_axis(input, &calib->y, y, invert_y, (data[1] >> 4) | (data[2] << 4));
+}
+
+static void switch2_report_trigger(struct input_dev *input, uint8_t zero, int abs, uint8_t data)
+{
+ int value = (NS2_TRIGGER_RANGE + 1) * (data - zero) / (232 - zero);
+
+ input_report_abs(input, abs, clamp(value, 0, NS2_TRIGGER_RANGE));
+}
+
+static int switch2_event(struct hid_device *hdev, struct hid_report *report, uint8_t *raw_data,
+ int size)
+{
+ struct switch2_controller *ns2 = hid_get_drvdata(hdev);
+ struct input_dev *input;
+
+ if (report->type != HID_INPUT_REPORT)
+ return 0;
+
+ if (size < 15)
+ return -EINVAL;
+
+ guard(rcu)();
+ input = rcu_dereference(ns2->input);
+
+ if (!input)
+ return 0;
+
+ switch (report->id) {
+ case NS2_REPORT_UNIFIED:
+ /*
+ * TODO
+ * This won't be sent unless the report type gets changed via command
+ * 03-0A, but we should support it at some point regardless.
+ */
+ break;
+ case NS2_REPORT_JCL:
+ switch2_report_stick(input, &ns2->stick_calib[0], ABS_X, false,
+ ABS_Y, true, &raw_data[6]);
+ switch2_report_buttons(input, &raw_data[3], ns2_left_joycon_button_mappings);
+ break;
+ case NS2_REPORT_JCR:
+ switch2_report_stick(input, &ns2->stick_calib[0], ABS_X, false,
+ ABS_Y, true, &raw_data[6]);
+ switch2_report_buttons(input, &raw_data[3], ns2_right_joycon_button_mappings);
+ break;
+ case NS2_REPORT_GC:
+ input_report_abs(input, ABS_HAT0X,
+ !!(raw_data[4] & NS2_BTNL_RIGHT) -
+ !!(raw_data[4] & NS2_BTNL_LEFT));
+ input_report_abs(input, ABS_HAT0Y,
+ !!(raw_data[4] & NS2_BTNL_DOWN) -
+ !!(raw_data[4] & NS2_BTNL_UP));
+ switch2_report_buttons(input, &raw_data[3], ns2_gccon_mappings);
+ switch2_report_stick(input, &ns2->stick_calib[0], ABS_X, false,
+ ABS_Y, true, &raw_data[6]);
+ switch2_report_stick(input, &ns2->stick_calib[1], ABS_RX, false,
+ ABS_RY, true, &raw_data[9]);
+ switch2_report_trigger(input, ns2->lt_zero, ABS_Z, raw_data[13]);
+ switch2_report_trigger(input, ns2->rt_zero, ABS_RZ, raw_data[14]);
+ break;
+ case NS2_REPORT_PRO:
+ input_report_abs(input, ABS_HAT0X,
+ !!(raw_data[4] & NS2_BTNL_RIGHT) -
+ !!(raw_data[4] & NS2_BTNL_LEFT));
+ input_report_abs(input, ABS_HAT0Y,
+ !!(raw_data[4] & NS2_BTNL_DOWN) -
+ !!(raw_data[4] & NS2_BTNL_UP));
+ switch2_report_buttons(input, &raw_data[3], ns2_procon_mappings);
+ switch2_report_stick(input, &ns2->stick_calib[0], ABS_X, false,
+ ABS_Y, true, &raw_data[6]);
+ switch2_report_stick(input, &ns2->stick_calib[1], ABS_RX, false,
+ ABS_RY, true, &raw_data[9]);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ input_sync(input);
+ return 0;
+}
+
+static int switch2_features_enable(struct switch2_controller *ns2, int features)
+{
+ __le32 feature_bits = __cpu_to_le32(features);
+
+ if (!ns2->cfg)
+ return -ENOTCONN;
+ return ns2->cfg->send_command(NS2_CMD_FEATSEL, NS2_SUBCMD_FEATSEL_ENABLE,
+ &feature_bits, sizeof(feature_bits),
+ ns2->cfg);
+}
+
+static int switch2_read_flash(struct switch2_controller *ns2, uint32_t address,
+ uint8_t size)
+{
+ uint8_t message[8] = { size, 0x7e };
+
+ if (!ns2->cfg)
+ return -ENOTCONN;
+ *(__le32 *)&message[4] = __cpu_to_le32(address);
+ return ns2->cfg->send_command(NS2_CMD_FLASH, NS2_SUBCMD_FLASH_READ, message,
+ sizeof(message), ns2->cfg);
+}
+
+static int switch2_set_player_id(struct switch2_controller *ns2, uint32_t player_id)
+{
+ int i;
+ int player_led_pattern = player_id % JC_NUM_LED_PATTERNS;
+
+ for (i = 0; i < JC_NUM_LEDS; i++)
+ ns2->leds[i].brightness = joycon_player_led_patterns[player_led_pattern][i];
+
+ return switch2_set_leds(ns2);
+}
+
+static int switch2_set_report_format(struct switch2_controller *ns2, enum switch2_report_id fmt)
+{
+ __le32 format_id = __cpu_to_le32(fmt);
+
+ if (!ns2->cfg)
+ return -ENOTCONN;
+ return ns2->cfg->send_command(NS2_CMD_INIT, NS2_SUBCMD_INIT_SELECT_REPORT,
+ &format_id, sizeof(format_id),
+ ns2->cfg);
+}
+
+static int switch2_init_controller(struct switch2_controller *ns2)
+{
+ if (ns2->init_step == NS2_INIT_DONE)
+ return 0;
+
+ if (!ns2->cfg)
+ return -ENOTCONN;
+
+ switch (ns2->init_step) {
+ case NS2_INIT_READ_SERIAL:
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_SERIAL,
+ NS2_FLASH_SIZE_SERIAL);
+ case NS2_INIT_GET_FIRMWARE_INFO:
+ return ns2->cfg->send_command(NS2_CMD_FW_INFO, NS2_SUBCMD_FW_INFO_GET,
+ NULL, 0, ns2->cfg);
+ case NS2_INIT_READ_FACTORY_PRIMARY_CALIB:
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_FACTORY_PRIMARY_CALIB,
+ NS2_FLASH_SIZE_FACTORY_AXIS_CALIB);
+ case NS2_INIT_READ_FACTORY_SECONDARY_CALIB:
+ if (switch2_ctlr_is_joycon(ns2->ctlr_type)) {
+ switch2_init_step_done(ns2, ns2->init_step);
+ return switch2_init_controller(ns2);
+ }
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_FACTORY_SECONDARY_CALIB,
+ NS2_FLASH_SIZE_FACTORY_AXIS_CALIB);
+ case NS2_INIT_READ_FACTORY_TRIGGER_CALIB:
+ if (ns2->ctlr_type != NS2_CTLR_TYPE_GC) {
+ switch2_init_step_done(ns2, ns2->init_step);
+ return switch2_init_controller(ns2);
+ }
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_FACTORY_TRIGGER_CALIB,
+ NS2_FLASH_SIZE_FACTORY_TRIGGER_CALIB);
+ case NS2_INIT_READ_USER_PRIMARY_CALIB:
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_USER_PRIMARY_CALIB,
+ NS2_FLASH_SIZE_USER_AXIS_CALIB);
+ case NS2_INIT_READ_USER_SECONDARY_CALIB:
+ if (switch2_ctlr_is_joycon(ns2->ctlr_type)) {
+ switch2_init_step_done(ns2, ns2->init_step);
+ return switch2_init_controller(ns2);
+ }
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_USER_SECONDARY_CALIB,
+ NS2_FLASH_SIZE_USER_AXIS_CALIB);
+ case NS2_INIT_SET_FEATURE_MASK:
+ return ns2->cfg->send_command(NS2_CMD_FEATSEL, NS2_SUBCMD_FEATSEL_SET_MASK,
+ switch2_feature_mask, sizeof(switch2_feature_mask), ns2->cfg);
+ case NS2_INIT_ENABLE_FEATURES:
+ return switch2_features_enable(ns2, NS2_FEATURE_BUTTONS | NS2_FEATURE_ANALOG);
+ case NS2_INIT_GRIP_BUTTONS:
+ if (!switch2_ctlr_is_joycon(ns2->ctlr_type)) {
+ switch2_init_step_done(ns2, ns2->init_step);
+ return switch2_init_controller(ns2);
+ }
+ return ns2->cfg->send_command(NS2_CMD_GRIP, NS2_SUBCMD_GRIP_ENABLE_BUTTONS,
+ switch2_one_data, sizeof(switch2_one_data),
+ ns2->cfg);
+ case NS2_INIT_REPORT_FORMAT:
+ switch (ns2->ctlr_type) {
+ case NS2_CTLR_TYPE_JCL:
+ return switch2_set_report_format(ns2, NS2_REPORT_JCL);
+ case NS2_CTLR_TYPE_JCR:
+ return switch2_set_report_format(ns2, NS2_REPORT_JCR);
+ case NS2_CTLR_TYPE_PRO:
+ return switch2_set_report_format(ns2, NS2_REPORT_PRO);
+ case NS2_CTLR_TYPE_GC:
+ return switch2_set_report_format(ns2, NS2_REPORT_GC);
+ default:
+ switch2_init_step_done(ns2, ns2->init_step);
+ return switch2_init_controller(ns2);
+ }
+ case NS2_INIT_SET_PLAYER_LEDS:
+ return switch2_set_player_id(ns2, ns2->player_id);
+ case NS2_INIT_INPUT:
+ return ns2->cfg->send_command(NS2_CMD_INIT, NS2_SUBCMD_INIT_USB,
+ switch2_init_cmd_data, sizeof(switch2_init_cmd_data), ns2->cfg);
+ case NS2_INIT_FINISH:
+ if (ns2->hdev)
+ return switch2_init_input(ns2);
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
+ return 0;
+}
+
+int switch2_receive_command(struct switch2_controller *ns2,
+ const uint8_t *message, size_t length)
+{
+ const struct switch2_cmd_header *header;
+ int ret = 0;
+
+ if (length < 8)
+ return -EINVAL;
+
+ print_hex_dump_debug("got cmd: ", DUMP_PREFIX_OFFSET, 16, 1, message, length, false);
+
+ guard(mutex)(&ns2->lock);
+
+ header = (const struct switch2_cmd_header *)message;
+ if (!(header->flags & NS2_FLAG_OK)) {
+ ret = -EIO;
+ goto exit;
+ }
+ message = &message[8];
+ switch (header->command) {
+ case NS2_CMD_FLASH:
+ if (header->subcommand == NS2_SUBCMD_FLASH_READ) {
+ uint8_t read_size;
+ uint32_t read_address;
+
+ if (length < 16) {
+ ret = -EINVAL;
+ goto exit;
+ }
+ read_size = message[0];
+ read_address = __le32_to_cpu(*(__le32 *)&message[4]);
+ if (length < read_size + 16) {
+ ret = -EINVAL;
+ goto exit;
+ }
+ switch2_handle_flash_read(ns2, read_size, read_address, &message[8]);
+ }
+ break;
+ case NS2_CMD_INIT:
+ if (header->subcommand == NS2_SUBCMD_INIT_USB)
+ switch2_init_step_done(ns2, NS2_INIT_INPUT);
+ else if (header->subcommand == NS2_SUBCMD_INIT_SELECT_REPORT)
+ switch2_init_step_done(ns2, NS2_INIT_REPORT_FORMAT);
+ break;
+ case NS2_CMD_GRIP:
+ if (header->subcommand == NS2_SUBCMD_GRIP_ENABLE_BUTTONS)
+ switch2_init_step_done(ns2, NS2_INIT_GRIP_BUTTONS);
+ break;
+ case NS2_CMD_LED:
+ if (header->subcommand == NS2_SUBCMD_LED_PATTERN)
+ switch2_init_step_done(ns2, NS2_INIT_SET_PLAYER_LEDS);
+ break;
+ case NS2_CMD_FEATSEL:
+ if (header->subcommand == NS2_SUBCMD_FEATSEL_SET_MASK)
+ switch2_init_step_done(ns2, NS2_INIT_SET_FEATURE_MASK);
+ else if (header->subcommand == NS2_SUBCMD_FEATSEL_ENABLE)
+ switch2_init_step_done(ns2, NS2_INIT_ENABLE_FEATURES);
+ break;
+ case NS2_CMD_FW_INFO:
+ if (header->subcommand == NS2_SUBCMD_FW_INFO_GET) {
+ if (length < sizeof(ns2->version)) {
+ ret = -EINVAL;
+ goto exit;
+ }
+ memcpy(&ns2->version, message, sizeof(ns2->version));
+ ns2->ctlr_type = ns2->version.ctlr_type;
+ switch2_init_step_done(ns2, NS2_INIT_GET_FIRMWARE_INFO);
+ }
+ break;
+ default:
+ break;
+ }
+
+exit:
+ if (ns2->init_step < NS2_INIT_DONE)
+ switch2_init_controller(ns2);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(switch2_receive_command);
+
+int switch2_controller_attach_cfg(const char *phys, struct switch2_cfg_intf *cfg)
+{
+ struct switch2_controller *ns2 = switch2_get_controller(phys);
+
+ if (IS_ERR(ns2))
+ return PTR_ERR(ns2);
+
+ cfg->parent = ns2;
+
+ guard(mutex)(&ns2->lock);
+ WARN_ON(ns2->cfg);
+ ns2->cfg = cfg;
+
+ if (ns2->hdev)
+ return switch2_init_controller(ns2);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(switch2_controller_attach_cfg);
+
+void switch2_controller_detach_cfg(struct switch2_controller *ns2)
+{
+ mutex_lock(&ns2->lock);
+ WARN_ON(ns2 != ns2->cfg->parent);
+ ns2->cfg = NULL;
+ mutex_unlock(&ns2->lock);
+ switch2_controller_put(ns2);
+}
+EXPORT_SYMBOL_GPL(switch2_controller_detach_cfg);
+
+static int switch2_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct switch2_controller *ns2;
+ struct usb_device *udev;
+ char phys[64];
+ int ret;
+
+ if (!hid_is_usb(hdev))
+ return -ENODEV;
+
+ udev = hid_to_usb_dev(hdev);
+ if (usb_make_path(udev, phys, sizeof(phys)) < 0)
+ return -EINVAL;
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "parse failed %d\n", ret);
+ return ret;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ if (ret) {
+ hid_err(hdev, "hw_start failed %d\n", ret);
+ return ret;
+ }
+
+ ret = hid_hw_open(hdev);
+ if (ret) {
+ hid_err(hdev, "hw_open failed %d\n", ret);
+ goto err_stop;
+ }
+
+ ns2 = switch2_get_controller(phys);
+ if (IS_ERR(ns2)) {
+ ret = PTR_ERR(ns2);
+ goto err_close;
+ }
+
+ guard(mutex)(&ns2->lock);
+ WARN_ON(ns2->hdev);
+ ns2->hdev = hdev;
+ switch (hdev->product | (hdev->vendor << 16)) {
+ default:
+ strscpy(ns2->name, hdev->name, sizeof(ns2->name));
+ break;
+ /* Some controllers have slightly wrong names so we override them */
+ case USB_DEVICE_ID_NINTENDO_NS2_JOYCONR | (USB_VENDOR_ID_NINTENDO << 16):
+ /* Missing the "2" in the name */
+ strscpy(ns2->name, "Nintendo Joy-Con 2 (R)", sizeof(ns2->name));
+ break;
+ case USB_DEVICE_ID_NINTENDO_NS2_GCCON | (USB_VENDOR_ID_NINTENDO << 16):
+ /* Has "Nintendo" in the name twice */
+ strscpy(ns2->name, "Nintendo GameCube Controller", sizeof(ns2->name));
+ break;
+ }
+
+ ns2->player_id = U32_MAX;
+ ret = ida_alloc(&nintendo_player_id_allocator, GFP_KERNEL);
+ if (ret < 0)
+ hid_warn(hdev, "Failed to allocate player ID, skipping; ret=%d\n", ret);
+ else
+ ns2->player_id = ret;
+
+ switch2_leds_create(ns2);
+
+ hid_set_drvdata(hdev, ns2);
+
+ if (ns2->cfg)
+ return switch2_init_controller(ns2);
+
+ return 0;
+
+err_close:
+ hid_hw_close(hdev);
+err_stop:
+ hid_hw_stop(hdev);
+
+ return ret;
+}
+
+static void switch2_remove(struct hid_device *hdev)
+{
+ struct switch2_controller *ns2 = hid_get_drvdata(hdev);
+
+ hid_hw_close(hdev);
+ mutex_lock(&ns2->lock);
+ WARN_ON(ns2->hdev != hdev);
+ ns2->hdev = NULL;
+ mutex_unlock(&ns2->lock);
+ ida_free(&nintendo_player_id_allocator, ns2->player_id);
+ switch2_controller_put(ns2);
+ hid_hw_stop(hdev);
+}
+
static const struct hid_device_id nintendo_hid_devices[] = {
+ /* Switch devices */
{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
USB_DEVICE_ID_NINTENDO_PROCON) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
@@ -2813,10 +3935,69 @@ static const struct hid_device_id nintendo_hid_devices[] = {
USB_DEVICE_ID_NINTENDO_GENCON) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
USB_DEVICE_ID_NINTENDO_N64CON) },
+ /* Switch 2 devices */
+ { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+ USB_DEVICE_ID_NINTENDO_NS2_JOYCONL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+ USB_DEVICE_ID_NINTENDO_NS2_JOYCONR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+ USB_DEVICE_ID_NINTENDO_NS2_PROCON) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+ USB_DEVICE_ID_NINTENDO_NS2_GCCON) },
{ }
};
MODULE_DEVICE_TABLE(hid, nintendo_hid_devices);
+static bool nintendo_is_switch2(struct hid_device *hdev)
+{
+ return hdev->vendor == USB_VENDOR_ID_NINTENDO &&
+ hdev->product >= USB_DEVICE_ID_NINTENDO_NS2_JOYCONR;
+}
+
+static void nintendo_hid_remove(struct hid_device *hdev)
+{
+ if (nintendo_is_switch2(hdev))
+ switch2_remove(hdev);
+ else
+ joycon_remove(hdev);
+}
+
+static int nintendo_hid_event(struct hid_device *hdev,
+ struct hid_report *report, u8 *raw_data, int size)
+{
+ if (nintendo_is_switch2(hdev))
+ return switch2_event(hdev, report, raw_data, size);
+ else
+ return joycon_event(hdev, report, raw_data, size);
+}
+
+static int nintendo_hid_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ if (nintendo_is_switch2(hdev))
+ return switch2_probe(hdev, id);
+ else
+ return joycon_probe(hdev, id);
+}
+
+#ifdef CONFIG_PM
+static int nintendo_hid_resume(struct hid_device *hdev)
+{
+ if (nintendo_is_switch2(hdev))
+ return 0;
+ else
+ return joycon_resume(hdev);
+}
+
+static int nintendo_hid_suspend(struct hid_device *hdev, pm_message_t message)
+{
+ if (nintendo_is_switch2(hdev))
+ return 0;
+ else
+ return joycon_suspend(hdev, message);
+}
+#endif
+
static struct hid_driver nintendo_hid_driver = {
.name = "nintendo",
.id_table = nintendo_hid_devices,
@@ -2844,4 +4025,5 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ryan McClelland <rymcclel@gmail.com>");
MODULE_AUTHOR("Emily Strickland <linux@emily.st>");
MODULE_AUTHOR("Daniel J. Ogorchock <djogorchock@gmail.com>");
+MODULE_AUTHOR("Vicki Pfau <vi@endrift.com>");
MODULE_DESCRIPTION("Driver for Nintendo Switch Controllers");
diff --git a/drivers/hid/hid-nintendo.h b/drivers/hid/hid-nintendo.h
new file mode 100644
index 000000000000..7aff22f30266
--- /dev/null
+++ b/drivers/hid/hid-nintendo.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * HID driver for Nintendo Switch 2 controllers
+ *
+ * Copyright (c) 2025 Valve Software
+ *
+ * This driver is based on the following work:
+ * https://gist.github.com/shinyquagsire23/66f006b46c56216acbaac6c1e2279b64
+ * https://github.com/ndeadly/switch2_controller_research
+ */
+
+#ifndef __HID_NINTENDO_H
+#define __HID_NINTENDO_H
+
+#include <linux/bits.h>
+
+#define NS2_FLAG_OK BIT(0)
+#define NS2_FLAG_NACK BIT(2)
+
+enum switch2_cmd {
+ NS2_CMD_NFC = 0x01,
+ NS2_CMD_FLASH = 0x02,
+ NS2_CMD_INIT = 0x03,
+ NS2_CMD_GRIP = 0x08,
+ NS2_CMD_LED = 0x09,
+ NS2_CMD_VIBRATE = 0x0a,
+ NS2_CMD_BATTERY = 0x0b,
+ NS2_CMD_FEATSEL = 0x0c,
+ NS2_CMD_FW_UPD = 0x0d,
+ NS2_CMD_FW_INFO = 0x10,
+ NS2_CMD_BT_PAIR = 0x15,
+};
+
+enum switch2_direction {
+ NS2_DIR_IN = 0x00,
+ NS2_DIR_OUT = 0x90,
+};
+
+enum switch2_transport {
+ NS2_TRANS_USB = 0x00,
+ NS2_TRANS_BT = 0x01,
+};
+
+struct switch2_cmd_header {
+ uint8_t command;
+ uint8_t flags;
+ uint8_t transport;
+ uint8_t subcommand;
+ uint8_t unk1;
+ uint8_t length;
+ uint16_t unk2;
+};
+static_assert(sizeof(struct switch2_cmd_header) == 8);
+
+struct device;
+struct switch2_controller;
+struct switch2_cfg_intf {
+ struct switch2_controller *parent;
+ struct device *dev;
+
+ int (*send_command)(enum switch2_cmd command, uint8_t subcommand,
+ const void *message, size_t length,
+ struct switch2_cfg_intf *intf);
+};
+
+int switch2_controller_attach_cfg(const char *phys, struct switch2_cfg_intf *cfg);
+void switch2_controller_detach_cfg(struct switch2_controller *controller);
+
+int switch2_receive_command(struct switch2_controller *controller,
+ const uint8_t *message, size_t length);
+
+#endif
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 7755e5b454d2..868262c6ccd9 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -422,4 +422,15 @@ config JOYSTICK_SEESAW
To compile this driver as a module, choose M here: the module will be
called adafruit-seesaw.
+config JOYSTICK_NINTENDO_SWITCH2_USB
+ tristate "Wired Nintendo Switch 2 controller support"
+ depends on HID_NINTENDO
+ depends on USB
+ help
+ Say Y here if you want to enable support for wired Nintendo Switch 2
+ controllers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nintendo-switch2-usb.
+
endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 9976f596a920..8f92900ae885 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_JOYSTICK_SIDEWINDER) += sidewinder.o
obj-$(CONFIG_JOYSTICK_SPACEBALL) += spaceball.o
obj-$(CONFIG_JOYSTICK_SPACEORB) += spaceorb.o
obj-$(CONFIG_JOYSTICK_STINGER) += stinger.o
+obj-$(CONFIG_JOYSTICK_NINTENDO_SWITCH2_USB) += nintendo-switch2-usb.o
obj-$(CONFIG_JOYSTICK_TMDC) += tmdc.o
obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o
obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o
diff --git a/drivers/input/joystick/nintendo-switch2-usb.c b/drivers/input/joystick/nintendo-switch2-usb.c
new file mode 100644
index 000000000000..ebd89d852e21
--- /dev/null
+++ b/drivers/input/joystick/nintendo-switch2-usb.c
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB driver for Nintendo Switch 2 controllers configuration interface
+ *
+ * Copyright (c) 2025 Valve Software
+ *
+ * This driver is based on the following work:
+ * https://gist.github.com/shinyquagsire23/66f006b46c56216acbaac6c1e2279b64
+ * https://github.com/ndeadly/switch2_controller_research
+ */
+
+#include "../../hid/hid-ids.h"
+#include "../../hid/hid-nintendo.h"
+#include <linux/module.h>
+#include <linux/usb/input.h>
+
+#define NS2_BULK_SIZE 64
+#define NS2_IN_URBS 2
+#define NS2_OUT_URBS 4
+
+static struct usb_driver switch2_usb;
+
+struct switch2_urb {
+ struct urb *urb;
+ uint8_t *data;
+ bool active;
+};
+
+struct switch2_usb {
+ struct switch2_cfg_intf cfg;
+ struct usb_device *udev;
+
+ struct switch2_urb bulk_in[NS2_IN_URBS];
+ struct usb_anchor bulk_in_anchor;
+ spinlock_t bulk_in_lock;
+
+ struct switch2_urb bulk_out[NS2_OUT_URBS];
+ struct usb_anchor bulk_out_anchor;
+ spinlock_t bulk_out_lock;
+
+ int message_in;
+ struct work_struct message_in_work;
+};
+
+static void switch2_bulk_in(struct urb *urb)
+{
+ struct switch2_usb *ns2_usb = urb->context;
+ int i;
+ bool schedule = false;
+ unsigned long flags;
+
+ switch (urb->status) {
+ case 0:
+ schedule = true;
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dev_dbg(&ns2_usb->udev->dev, "shutting down input urb: %d\n", urb->status);
+ return;
+ default:
+ dev_dbg(&ns2_usb->udev->dev, "unknown input urb status: %d\n", urb->status);
+ break;
+ }
+
+ spin_lock_irqsave(&ns2_usb->bulk_in_lock, flags);
+ for (i = 0; i < NS2_IN_URBS; i++) {
+ int err;
+ struct switch2_urb *ns2_urb;
+
+ if (ns2_usb->bulk_in[i].urb == urb) {
+ ns2_usb->message_in = i;
+ continue;
+ }
+
+ if (ns2_usb->bulk_in[i].active)
+ continue;
+
+ ns2_urb = &ns2_usb->bulk_in[i];
+ usb_anchor_urb(ns2_urb->urb, &ns2_usb->bulk_in_anchor);
+ err = usb_submit_urb(ns2_urb->urb, GFP_ATOMIC);
+ if (err) {
+ usb_unanchor_urb(ns2_urb->urb);
+ dev_dbg(&ns2_usb->udev->dev, "failed to queue input urb: %d\n", err);
+ } else {
+ ns2_urb->active = true;
+ }
+ }
+ spin_unlock_irqrestore(&ns2_usb->bulk_in_lock, flags);
+
+ if (schedule)
+ schedule_work(&ns2_usb->message_in_work);
+}
+
+static void switch2_bulk_out(struct urb *urb)
+{
+ struct switch2_usb *ns2_usb = urb->context;
+ int i;
+
+ guard(spinlock_irqsave)(&ns2_usb->bulk_out_lock);
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dev_dbg(&ns2_usb->udev->dev, "shutting down output urb: %d\n", urb->status);
+ return;
+ default:
+ dev_dbg(&ns2_usb->udev->dev, "unknown output urb status: %d\n", urb->status);
+ return;
+ }
+
+ for (i = 0; i < NS2_OUT_URBS; i++) {
+ if (ns2_usb->bulk_out[i].urb != urb)
+ continue;
+
+ ns2_usb->bulk_out[i].active = false;
+ break;
+ }
+}
+
+static int switch2_usb_send_cmd(enum switch2_cmd command, uint8_t subcommand,
+ const void *message, size_t size, struct switch2_cfg_intf *cfg)
+{
+ struct switch2_usb *ns2_usb = (struct switch2_usb *)cfg;
+ struct switch2_urb *urb = NULL;
+ int i;
+ int ret;
+ unsigned long flags;
+
+ struct switch2_cmd_header header = {
+ command, NS2_DIR_OUT | NS2_FLAG_OK, NS2_TRANS_USB, subcommand, 0, size
+ };
+
+ if (WARN_ON(size > 56))
+ return -EINVAL;
+
+ spin_lock_irqsave(&ns2_usb->bulk_out_lock, flags);
+ for (i = 0; i < NS2_OUT_URBS; i++) {
+ if (ns2_usb->bulk_out[i].active)
+ continue;
+
+ urb = &ns2_usb->bulk_out[i];
+ urb->active = true;
+ break;
+ }
+ spin_unlock_irqrestore(&ns2_usb->bulk_out_lock, flags);
+
+ if (!urb) {
+ dev_warn(&ns2_usb->udev->dev, "output queue full, dropping message\n");
+ return -ENOBUFS;
+ }
+
+ memcpy(urb->data, &header, sizeof(header));
+ if (message && size)
+ memcpy(&urb->data[8], message, size);
+ urb->urb->transfer_buffer_length = size + sizeof(header);
+
+ print_hex_dump_debug("sending cmd: ", DUMP_PREFIX_OFFSET, 16, 1, urb->data,
+ size + sizeof(header), false);
+
+ usb_anchor_urb(urb->urb, &ns2_usb->bulk_out_anchor);
+ ret = usb_submit_urb(urb->urb, GFP_ATOMIC);
+ if (ret) {
+ if (ret != -ENODEV)
+ dev_warn(&ns2_usb->udev->dev, "failed to submit output urb: %i", ret);
+ urb->active = false;
+ usb_unanchor_urb(urb->urb);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void switch2_usb_message_in_work(struct work_struct *work)
+{
+ struct switch2_usb *ns2_usb = container_of(work, struct switch2_usb, message_in_work);
+ struct switch2_urb *urb;
+ int err;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ns2_usb->bulk_in_lock, flags);
+ urb = &ns2_usb->bulk_in[ns2_usb->message_in];
+ spin_unlock_irqrestore(&ns2_usb->bulk_in_lock, flags);
+
+ err = switch2_receive_command(ns2_usb->cfg.parent, urb->urb->transfer_buffer,
+ urb->urb->actual_length);
+ if (err)
+ dev_dbg(&ns2_usb->udev->dev, "receive command failed: %d\n", err);
+
+ spin_lock_irqsave(&ns2_usb->bulk_in_lock, flags);
+ urb->active = false;
+ spin_unlock_irqrestore(&ns2_usb->bulk_in_lock, flags);
+}
+
+static int switch2_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct switch2_usb *ns2_usb;
+ struct usb_device *udev;
+ struct usb_endpoint_descriptor *bulk_in, *bulk_out;
+ char phys[64];
+ int ret;
+ int i;
+
+ udev = interface_to_usbdev(intf);
+ if (usb_make_path(udev, phys, sizeof(phys)) < 0)
+ return -EINVAL;
+
+ ret = usb_find_common_endpoints(intf->cur_altsetting, &bulk_in, &bulk_out, NULL, NULL);
+ if (ret) {
+ dev_err(&intf->dev, "failed to find bulk EPs\n");
+ return ret;
+ }
+
+ ns2_usb = devm_kzalloc(&intf->dev, sizeof(*ns2_usb), GFP_KERNEL);
+ if (!ns2_usb)
+ return -ENOMEM;
+
+ ns2_usb->udev = udev;
+ for (i = 0; i < NS2_IN_URBS; i++) {
+ ns2_usb->bulk_in[i].urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ns2_usb->bulk_in[i].urb) {
+ ret = -ENOMEM;
+ goto err_free_in;
+ }
+
+ ns2_usb->bulk_in[i].data = usb_alloc_coherent(udev, NS2_BULK_SIZE, GFP_KERNEL,
+ &ns2_usb->bulk_in[i].urb->transfer_dma);
+ if (!ns2_usb->bulk_in[i].data) {
+ ret = -ENOMEM;
+ goto err_free_in;
+ }
+
+ usb_fill_bulk_urb(ns2_usb->bulk_in[i].urb, udev,
+ usb_rcvbulkpipe(udev, bulk_in->bEndpointAddress),
+ ns2_usb->bulk_in[i].data, NS2_BULK_SIZE, switch2_bulk_in, ns2_usb);
+ ns2_usb->bulk_in[i].urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ }
+
+ for (i = 0; i < NS2_OUT_URBS; i++) {
+ ns2_usb->bulk_out[i].urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ns2_usb->bulk_out[i].urb) {
+ ret = -ENOMEM;
+ goto err_free_out;
+ }
+
+ ns2_usb->bulk_out[i].data = usb_alloc_coherent(udev, NS2_BULK_SIZE, GFP_KERNEL,
+ &ns2_usb->bulk_out[i].urb->transfer_dma);
+ if (!ns2_usb->bulk_out[i].data) {
+ ret = -ENOMEM;
+ goto err_free_out;
+ }
+
+ usb_fill_bulk_urb(ns2_usb->bulk_out[i].urb, udev,
+ usb_sndbulkpipe(udev, bulk_out->bEndpointAddress),
+ ns2_usb->bulk_out[i].data, NS2_BULK_SIZE, switch2_bulk_out, ns2_usb);
+ ns2_usb->bulk_out[i].urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ }
+
+ ns2_usb->bulk_in[0].active = true;
+ ret = usb_submit_urb(ns2_usb->bulk_in[0].urb, GFP_ATOMIC);
+ if (ret < 0)
+ goto err_free_out;
+
+ init_usb_anchor(&ns2_usb->bulk_out_anchor);
+ spin_lock_init(&ns2_usb->bulk_out_lock);
+ init_usb_anchor(&ns2_usb->bulk_in_anchor);
+ spin_lock_init(&ns2_usb->bulk_in_lock);
+ INIT_WORK(&ns2_usb->message_in_work, switch2_usb_message_in_work);
+
+ usb_set_intfdata(intf, ns2_usb);
+
+ ns2_usb->cfg.dev = &ns2_usb->udev->dev;
+ ns2_usb->cfg.send_command = switch2_usb_send_cmd;
+
+ ret = switch2_controller_attach_cfg(phys, &ns2_usb->cfg);
+ if (ret < 0)
+ goto err_kill_urb;
+
+ return 0;
+
+err_kill_urb:
+ usb_kill_urb(ns2_usb->bulk_in[0].urb);
+err_free_out:
+ for (i = 0; i < NS2_OUT_URBS; i++) {
+ usb_free_coherent(ns2_usb->udev, NS2_BULK_SIZE, ns2_usb->bulk_out[i].data,
+ ns2_usb->bulk_out[i].urb->transfer_dma);
+ usb_free_urb(ns2_usb->bulk_out[i].urb);
+ }
+err_free_in:
+ for (i = 0; i < NS2_IN_URBS; i++) {
+ usb_free_coherent(ns2_usb->udev, NS2_BULK_SIZE, ns2_usb->bulk_in[i].data,
+ ns2_usb->bulk_in[i].urb->transfer_dma);
+ usb_free_urb(ns2_usb->bulk_in[i].urb);
+ }
+ devm_kfree(&intf->dev, ns2_usb);
+
+ return ret;
+}
+
+static void switch2_usb_disconnect(struct usb_interface *intf)
+{
+ struct switch2_usb *ns2_usb = usb_get_intfdata(intf);
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&ns2_usb->bulk_out_lock, flags);
+ usb_kill_anchored_urbs(&ns2_usb->bulk_out_anchor);
+ for (i = 0; i < NS2_OUT_URBS; i++) {
+ usb_free_coherent(ns2_usb->udev, NS2_BULK_SIZE, ns2_usb->bulk_out[i].data,
+ ns2_usb->bulk_out[i].urb->transfer_dma);
+ usb_free_urb(ns2_usb->bulk_out[i].urb);
+ }
+ spin_unlock_irqrestore(&ns2_usb->bulk_out_lock, flags);
+
+ spin_lock_irqsave(&ns2_usb->bulk_in_lock, flags);
+ usb_kill_anchored_urbs(&ns2_usb->bulk_in_anchor);
+ cancel_work_sync(&ns2_usb->message_in_work);
+ for (i = 0; i < NS2_IN_URBS; i++) {
+ usb_free_coherent(ns2_usb->udev, NS2_BULK_SIZE, ns2_usb->bulk_in[i].data,
+ ns2_usb->bulk_in[i].urb->transfer_dma);
+ usb_free_urb(ns2_usb->bulk_in[i].urb);
+ }
+ spin_unlock_irqrestore(&ns2_usb->bulk_in_lock, flags);
+
+ switch2_controller_detach_cfg(ns2_usb->cfg.parent);
+}
+
+#define SWITCH2_CONTROLLER(vend, prod) \
+ USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_VENDOR_SPEC, 0, 0)
+
+static const struct usb_device_id switch2_usb_devices[] = {
+ { SWITCH2_CONTROLLER(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_NS2_JOYCONL) },
+ { SWITCH2_CONTROLLER(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_NS2_JOYCONR) },
+ { SWITCH2_CONTROLLER(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_NS2_PROCON) },
+ { SWITCH2_CONTROLLER(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_NS2_GCCON) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, switch2_usb_devices);
+
+static struct usb_driver switch2_usb = {
+ .name = "switch2",
+ .id_table = switch2_usb_devices,
+ .probe = switch2_usb_probe,
+ .disconnect = switch2_usb_disconnect,
+};
+module_usb_driver(switch2_usb);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vicki Pfau <vi@endrift.com>");
+MODULE_DESCRIPTION("Driver for Nintendo Switch 2 Controllers");
--
2.53.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v4 3/3] HID: nintendo: Add unified report format support
2026-04-15 7:31 [PATCH v4 0/3] HID: nintendo: Add preliminary Switch 2 controller driver Vicki Pfau
2026-04-15 7:31 ` [PATCH v4 1/3] " Vicki Pfau
2026-04-15 7:31 ` [PATCH v4 2/3] HID: nintendo: Add rumble support for Switch 2 controllers Vicki Pfau
@ 2026-04-15 7:31 ` Vicki Pfau
2 siblings, 0 replies; 4+ messages in thread
From: Vicki Pfau @ 2026-04-15 7:31 UTC (permalink / raw)
To: Dmitry Torokhov, Jiri Kosina, Benjamin Tissoires, linux-input; +Cc: Vicki Pfau
This adds support for the "unified" report format that all controllers also
support, which has overlapping fields for like buttons and axes between
them.
Signed-off-by: Vicki Pfau <vi@endrift.com>
---
drivers/hid/hid-nintendo.c | 148 +++++++++++++++++++++++++++++++++++--
1 file changed, 143 insertions(+), 5 deletions(-)
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index d55186698deb..1b9e46de60c2 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -2828,6 +2828,36 @@ static int joycon_suspend(struct hid_device *hdev, pm_message_t message)
#define NS2_BTN3_SR BIT(6)
#define NS2_BTN3_SL BIT(7)
+#define NS2_BTN_U1_Y BIT(0)
+#define NS2_BTN_U1_X BIT(1)
+#define NS2_BTN_U1_B BIT(2)
+#define NS2_BTN_U1_A BIT(3)
+#define NS2_BTN_U1_SR BIT(4)
+#define NS2_BTN_U1_SL BIT(5)
+#define NS2_BTN_U1_R BIT(6)
+#define NS2_BTN_U1_ZR BIT(7)
+
+#define NS2_BTN_U2_MINUS BIT(0)
+#define NS2_BTN_U2_PLUS BIT(1)
+#define NS2_BTN_U2_RS BIT(2)
+#define NS2_BTN_U2_LS BIT(3)
+#define NS2_BTN_U2_HOME BIT(4)
+#define NS2_BTN_U2_CAPTURE BIT(5)
+#define NS2_BTN_U2_C BIT(6)
+
+#define NS2_BTN_U3_DOWN BIT(0)
+#define NS2_BTN_U3_UP BIT(1)
+#define NS2_BTN_U3_RIGHT BIT(2)
+#define NS2_BTN_U3_LEFT BIT(3)
+#define NS2_BTN_U3_SR BIT(4)
+#define NS2_BTN_U3_SL BIT(5)
+#define NS2_BTN_U3_L BIT(6)
+#define NS2_BTN_U3_ZL BIT(7)
+
+#define NS2_BTN_U4_GR BIT(0)
+#define NS2_BTN_U4_GL BIT(1)
+#define NS2_BTN_U4_HEADSET BIT(5)
+
#define NS2_BTN_JCR_HOME BIT(0)
#define NS2_BTN_JCR_GR BIT(2)
#define NS2_BTN_JCR_C NS2_BTN3_C
@@ -3073,6 +3103,22 @@ static const struct switch2_ctlr_button_mapping ns2_left_joycon_button_mappings[
{ /* sentinel */ },
};
+static const struct switch2_ctlr_button_mapping ns2_left_joycon_button_unified_mappings[] = {
+ { BTN_DPAD_LEFT, 2, NS2_BTN_U3_LEFT, },
+ { BTN_DPAD_UP, 2, NS2_BTN_U3_UP, },
+ { BTN_DPAD_DOWN, 2, NS2_BTN_U3_DOWN, },
+ { BTN_DPAD_RIGHT, 2, NS2_BTN_U3_RIGHT, },
+ { BTN_TL, 2, NS2_BTN_U3_L, },
+ { BTN_TL2, 2, NS2_BTN_U3_ZL, },
+ { BTN_SELECT, 1, NS2_BTN_U2_MINUS, },
+ { BTN_THUMBL, 1, NS2_BTN_U2_LS, },
+ { KEY_RECORD, 1, NS2_BTN_U2_CAPTURE, },
+ { BTN_GRIPR, 2, NS2_BTN_U3_SL, },
+ { BTN_GRIPR2, 2, NS2_BTN_U3_SR, },
+ { BTN_GRIPL, 3, NS2_BTN_U4_GL, },
+ { /* sentinel */ },
+};
+
static const struct switch2_ctlr_button_mapping ns2_right_joycon_button_mappings[] = {
{ BTN_SOUTH, 0, NS2_BTNR_A, },
{ BTN_EAST, 0, NS2_BTNR_B, },
@@ -3090,6 +3136,23 @@ static const struct switch2_ctlr_button_mapping ns2_right_joycon_button_mappings
{ /* sentinel */ },
};
+static const struct switch2_ctlr_button_mapping ns2_right_joycon_button_unified_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTN_U1_A, },
+ { BTN_EAST, 0, NS2_BTN_U1_B, },
+ { BTN_NORTH, 0, NS2_BTN_U1_X, },
+ { BTN_WEST, 0, NS2_BTN_U1_Y, },
+ { BTN_TR, 0, NS2_BTN_U1_R, },
+ { BTN_TR2, 0, NS2_BTN_U1_ZR },
+ { BTN_START, 1, NS2_BTN_U2_PLUS, },
+ { BTN_THUMBR, 1, NS2_BTN_U2_RS, },
+ { BTN_C, 1, NS2_BTN_U2_C, },
+ { BTN_MODE, 1, NS2_BTN_U2_HOME, },
+ { BTN_GRIPL2, 0, NS2_BTN_U1_SL, },
+ { BTN_GRIPL, 0, NS2_BTN_U1_SR, },
+ { BTN_GRIPR, 3, NS2_BTN_U4_GR, },
+ { /* sentinel */ },
+};
+
static const struct switch2_ctlr_button_mapping ns2_procon_mappings[] = {
{ BTN_SOUTH, 0, NS2_BTNR_A, },
{ BTN_EAST, 0, NS2_BTNR_B, },
@@ -3111,6 +3174,27 @@ static const struct switch2_ctlr_button_mapping ns2_procon_mappings[] = {
{ /* sentinel */ },
};
+static const struct switch2_ctlr_button_mapping ns2_procon_unified_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTN_U1_A, },
+ { BTN_EAST, 0, NS2_BTN_U1_B, },
+ { BTN_NORTH, 0, NS2_BTN_U1_X, },
+ { BTN_WEST, 0, NS2_BTN_U1_Y, },
+ { BTN_TL, 2, NS2_BTN_U3_L, },
+ { BTN_TR, 0, NS2_BTN_U1_R, },
+ { BTN_TL2, 2, NS2_BTN_U3_ZL, },
+ { BTN_TR2, 0, NS2_BTN_U1_ZR, },
+ { BTN_SELECT, 1, NS2_BTN_U2_MINUS, },
+ { BTN_START, 1, NS2_BTN_U2_PLUS, },
+ { BTN_THUMBL, 1, NS2_BTN_U2_LS, },
+ { BTN_THUMBR, 1, NS2_BTN_U2_RS, },
+ { BTN_MODE, 1, NS2_BTN_U2_HOME },
+ { KEY_RECORD, 1, NS2_BTN_U2_CAPTURE },
+ { BTN_GRIPR, 3, NS2_BTN_U4_GR },
+ { BTN_GRIPL, 3, NS2_BTN_U4_GL },
+ { BTN_C, 1, NS2_BTN_U2_C },
+ { /* sentinel */ },
+};
+
static const struct switch2_ctlr_button_mapping ns2_gccon_mappings[] = {
{ BTN_SOUTH, 0, NS2_BTNR_A, },
{ BTN_EAST, 0, NS2_BTNR_B, },
@@ -3128,6 +3212,23 @@ static const struct switch2_ctlr_button_mapping ns2_gccon_mappings[] = {
{ /* sentinel */ },
};
+static const struct switch2_ctlr_button_mapping ns2_gccon_unified_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTN_U1_A, },
+ { BTN_EAST, 0, NS2_BTN_U1_B, },
+ { BTN_NORTH, 0, NS2_BTN_U1_X, },
+ { BTN_WEST, 0, NS2_BTN_U1_Y, },
+ { BTN_TL2, 2, NS2_BTN_U3_L, },
+ { BTN_TR2, 0, NS2_BTN_U1_R, },
+ { BTN_TL, 2, NS2_BTN_U3_ZL },
+ { BTN_TR, 0, NS2_BTN_U1_ZR },
+ { BTN_SELECT, 1, NS2_BTN_U2_MINUS, },
+ { BTN_START, 1, NS2_BTN_U2_PLUS, },
+ { BTN_MODE, 1, NS2_BTN_U2_HOME },
+ { KEY_RECORD, 1, NS2_BTN_U2_CAPTURE },
+ { BTN_C, 1, NS2_BTN_U2_C },
+ { /* sentinel */ },
+};
+
static const uint8_t switch2_init_cmd_data[] = {
/*
* The last 6 bytes of this packet are the MAC address of
@@ -3691,11 +3792,48 @@ static int switch2_event(struct hid_device *hdev, struct hid_report *report, uin
switch (report->id) {
case NS2_REPORT_UNIFIED:
- /*
- * TODO
- * This won't be sent unless the report type gets changed via command
- * 03-0A, but we should support it at some point regardless.
- */
+ switch (ns2->ctlr_type) {
+ case NS2_CTLR_TYPE_JCL:
+ switch2_report_stick(input, &ns2->stick_calib[0],
+ ABS_X, false, ABS_Y, true, &raw_data[11]);
+ switch2_report_buttons(input, &raw_data[5],
+ ns2_left_joycon_button_unified_mappings);
+ break;
+ case NS2_CTLR_TYPE_JCR:
+ switch2_report_stick(input, &ns2->stick_calib[0],
+ ABS_X, false, ABS_Y, true, &raw_data[14]);
+ switch2_report_buttons(input, &raw_data[5],
+ ns2_right_joycon_button_unified_mappings);
+ break;
+ case NS2_CTLR_TYPE_GC:
+ input_report_abs(input, ABS_HAT0X,
+ !!(raw_data[7] & NS2_BTN_U3_RIGHT) -
+ !!(raw_data[7] & NS2_BTN_U3_LEFT));
+ input_report_abs(input, ABS_HAT0Y,
+ !!(raw_data[7] & NS2_BTN_U3_DOWN) -
+ !!(raw_data[7] & NS2_BTN_U3_UP));
+ switch2_report_buttons(input, &raw_data[5], ns2_gccon_unified_mappings);
+ switch2_report_stick(input, &ns2->stick_calib[0],
+ ABS_X, false, ABS_Y, true, &raw_data[11]);
+ switch2_report_stick(input, &ns2->stick_calib[1],
+ ABS_RX, false, ABS_RY, true, &raw_data[14]);
+ switch2_report_trigger(input, ns2->lt_zero, ABS_Z, raw_data[0x3d]);
+ switch2_report_trigger(input, ns2->rt_zero, ABS_RZ, raw_data[0x3e]);
+ break;
+ case NS2_CTLR_TYPE_PRO:
+ input_report_abs(input, ABS_HAT0X,
+ !!(raw_data[7] & NS2_BTN_U3_RIGHT) -
+ !!(raw_data[7] & NS2_BTN_U3_LEFT));
+ input_report_abs(input, ABS_HAT0Y,
+ !!(raw_data[7] & NS2_BTN_U3_DOWN) -
+ !!(raw_data[7] & NS2_BTN_U3_UP));
+ switch2_report_buttons(input, &raw_data[5], ns2_procon_unified_mappings);
+ switch2_report_stick(input, &ns2->stick_calib[0],
+ ABS_X, false, ABS_Y, true, &raw_data[11]);
+ switch2_report_stick(input, &ns2->stick_calib[1],
+ ABS_RX, false, ABS_RY, true, &raw_data[14]);
+ break;
+ }
break;
case NS2_REPORT_JCL:
switch2_report_stick(input, &ns2->stick_calib[0], ABS_X, false,
--
2.53.0
^ permalink raw reply related [flat|nested] 4+ messages in thread