[PATCH 2/7] iio: accel: HID: Replace method accel_3d_adjust_channel_bit_mask()

["Natália Salvino André" <natalia.andre@ime.usp.br>]

Replace method accel_3d_adjust_channel_bit_mask()
with helper method hid_sensor_adjust_channel_bit_mask().

Signed-off-by: Natália Salvino André <natalia.andre@ime.usp.br>
Co-developed-by: Pietro Di Consolo Gregorio <pietro.gregorio@usp.br>
Signed-off-by: Pietro Di Consolo Gregorio <pietro.gregorio@usp.br>
---
 drivers/iio/accel/hid-sensor-accel-3d.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index 2ff591b3458f..75f93b52a926 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -119,17 +119,6 @@ static const struct iio_chan_spec gravity_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP),
 };
 
-/* Adjust channel real bits based on report descriptor */
-static void accel_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
-						int channel, int size)
-{
-	channels[channel].scan_type.sign = 's';
-	/* Real storage bits will change based on the report desc. */
-	channels[channel].scan_type.realbits = size * 8;
-	/* Maximum size of a sample to capture is u32 */
-	channels[channel].scan_type.storagebits = sizeof(u32) * 8;
-}
-
 /* Channel read_raw handler */
 static int accel_3d_read_raw(struct iio_dev *indio_dev,
 			      struct iio_chan_spec const *chan,
@@ -307,7 +296,7 @@ static int accel_3d_parse_report(struct platform_device *pdev,
 				&st->accel[CHANNEL_SCAN_INDEX_X + i]);
 		if (ret < 0)
 			break;
-		accel_3d_adjust_channel_bit_mask(channels,
+		hid_sensor_adjust_channel_bit_mask(channels,
 				CHANNEL_SCAN_INDEX_X + i,
 				st->accel[CHANNEL_SCAN_INDEX_X + i].size);
 	}
-- 
2.51.0