[PATCH v3 0/2] Add PixArt PAJ7620 gesture sensor support

[PATCH v3 0/2] Add PixArt PAJ7620 gesture sensor support

[Harpreet Saini]

This series adds support for the PixArt PAJ7620 gesture sensor.
The first patch provides the DT bindings, and the second patch
implements the input driver.

Changes in v3:
- Moved sensor power-up and paj7620_init() to input open/close 
  callbacks
- Implemented dynamic keymap support via 'linux,keycodes' DT property
  and enabled userspace adjustment via EVIOCSKEYCODE.
- Updated YAML bindings to include mandatory vdd, vbus, and vled
  supplies.
- Added gpio-controller properties to YAML for hardware completeness.
- Verified with dt_binding_check and checkpatch.pl --strict.

Harpreet Saini (2):
  dt-bindings: input: Add PixArt PAJ7620 gesture sensor
  input: misc: Add PixArt PAJ7620 gesture sensor driver

 .../bindings/input/pixart,paj7620.yaml        |  79 ++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 drivers/input/misc/Kconfig                    |  12 +
 drivers/input/misc/Makefile                   |   1 +
 drivers/input/misc/paj7620.c                  | 338 ++++++++++++++++++
 5 files changed, 432 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/
 pixart,paj7620.yaml
 create mode 100644 drivers/input/misc/paj7620.c

-- 
2.43.0

[PATCH v3 1/2] dt-bindings: input: Add PixArt PAJ7620 gesture sensor

[Harpreet Saini]

Add Device Tree bindings for Pixart PAJ7620 gesture sensor.
The sensor supports 9 hand gestures via I2C interface.

The binding include mandatory power supplies (vdd, vbus, vled)
and optional GPIO controller properties to describe the hardware's
ability to repurpose SPI pins opeating in I2C mode.

Signed-off-by: Harpreet Saini <sainiharpreet29@yahoo.com>
---
 .../bindings/input/pixart,paj7620.yaml        | 79 +++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 2 files changed, 81 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/pixart,paj7620.yaml

diff --git a/Documentation/devicetree/bindings/input/pixart,paj7620.yaml b/Documentation/devicetree/bindings/input/pixart,paj7620.yaml
new file mode 100644
index 000000000000..ad051cf641a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pixart,paj7620.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pixart,paj7620.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PixArt PAJ7620 Gesture Sensor
+
+maintainers:
+  - Harpreet Saini <sainiharpreet29@yahoo.com>
+
+description: |
+  The PixArt PAJ7620 is a gesture recognition sensor with an integrated
+  infrared LED and CMOS array. It communicates over an I2C interface and
+  provides gesture data via a dedicated interrupt pin.
+
+properties:
+  compatible:
+    const: pixart,paj7620
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply.
+
+  vbus-supply:
+    description: I/O and I2C bus power supply.
+
+  vled-supply:
+    description: Power for the integrated IR LED.
+
+  linux,keycodes:
+    minItems: 9
+    maxItems: 9
+    description: |
+      List of keycodes mapping to the 9 supported gestures.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+  - vbus-supply
+  - vled-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gesture@73 {
+            compatible = "pixart,paj7620";
+            reg = <0x73>;
+            interrupt-parent = <&gpio>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&reg_3v3>;
+            vbus-supply = <&reg_1v8>;
+            vled-supply = <&reg_3v3>;
+            linux,keycodes = <KEY_UP KEY_DOWN KEY_LEFT KEY_RIGHT
+                             KEY_ENTER KEY_BACK KEY_NEXT KEY_PREVIOUS
+                             KEY_MENU>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ee7fd3cfe203..d73a0bf62b62 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1273,6 +1273,8 @@ patternProperties:
     description: Pine64
   "^pineriver,.*":
     description: Shenzhen PineRiver Designs Co., Ltd.
+  "^pixart,.*":
+    description: PixArt Imaging Inc.
   "^pixcir,.*":
     description: PIXCIR MICROELECTRONICS Co., Ltd
   "^plantower,.*":
-- 
2.43.0

[PATCH v3 2/2] input: misc: Add PixArt PAJ7620 gesture sensor driver

[Harpreet Saini]

This driver adds support for the PixArt PAJ7620 gesture sensor.
It implements hand gesture recognition (up, down, left, right,
etc.) and reports them as standard input key events. The driver
includes power management support via Runtime PM.

Signed-off-by: Harpreet Saini <sainiharpreet29@yahoo.com>
---
 drivers/input/misc/Kconfig   |  12 ++
 drivers/input/misc/Makefile  |   1 +
 drivers/input/misc/paj7620.c | 338 +++++++++++++++++++++++++++++++++++
 3 files changed, 351 insertions(+)
 create mode 100644 drivers/input/misc/paj7620.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 94a753fcb64f..de4206c297f2 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -453,6 +453,18 @@ config INPUT_KXTJ9
 	  To compile this driver as a module, choose M here: the module will
 	  be called kxtj9.
 
+config INPUT_PAJ7620
+	tristate "PixArt PAJ7620 Gesture Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here if you want to support the PixArt PAJ7620 gesture
+	  sensor. This sensor supports 9 hand gestures and communicates
+	  over the I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called paj7620.
+
 config INPUT_POWERMATE
 	tristate "Griffin PowerMate and Contour Jog support"
 	depends on USB_ARCH_HAS_HCD
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 415fc4e2918b..dec8b8d0cdf4 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_INPUT_PF1550_ONKEY)	+= pf1550-onkey.o
 obj-$(CONFIG_INPUT_PM8941_PWRKEY)	+= pm8941-pwrkey.o
 obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR)	+= pm8xxx-vibrator.o
 obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY)	+= pmic8xxx-pwrkey.o
+obj-$(CONFIG_INPUT_PAJ7620) 		+= paj7620.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
 obj-$(CONFIG_INPUT_PWM_BEEPER)		+= pwm-beeper.o
 obj-$(CONFIG_INPUT_PWM_VIBRA)		+= pwm-vibra.o
diff --git a/drivers/input/misc/paj7620.c b/drivers/input/misc/paj7620.c
new file mode 100644
index 000000000000..8738c174bcc1
--- /dev/null
+++ b/drivers/input/misc/paj7620.c
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PixArt PAJ7620 Gesture Sensor - Input driver
+ *
+ * Copyright (C) 2026 Harpreet Saini <sainiharpreet29@yahoo.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+/* Registers */
+#define PAJ7620_REG_BANK_SEL        0xEF
+#define PAJ7620_REG_GES_RESULT1     0x43
+#define PAJ7620_REG_GES_RESULT2     0x44
+#define PAJ7620_REG_SLEEP_BANK0     0x65
+#define PAJ7620_REG_SLEEP_BANK1     0x05
+#define PAJ7620_REG_AUTO_STANDBY    0x073
+
+/* Gesture bits */
+#define PAJ_UP           BIT(0)
+#define PAJ_DOWN         BIT(1)
+#define PAJ_LEFT         BIT(2)
+#define PAJ_RIGHT        BIT(3)
+#define PAJ_FORWARD      BIT(4)
+#define PAJ_BACKWARD     BIT(5)
+#define PAJ_CLOCKWISE    BIT(6)
+#define PAJ_ANTICLOCK    BIT(7)
+#define PAJ_WAVE         BIT(8)
+#define PAJ_MAX_GESTURES 9
+
+struct paj7620_data {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct input_dev *idev;
+	struct regulator_bulk_data supplies[3];
+	u32 keymap[PAJ_MAX_GESTURES];
+};
+
+/*
+ * The following arrays contain undocumented register sequences required to
+ * initialize the sensor's internal DSP and gesture engine.
+ * These were derived from vendor reference code and verified via testing.
+ */
+static const struct reg_sequence init_register[] = {
+	{ 0xEF, 0x00 }, { 0x37, 0x07 }, { 0x38, 0x17 }, { 0x39, 0x06 },
+	{ 0x41, 0x00 }, { 0x42, 0x00 }, { 0x46, 0x2D }, { 0x47, 0x0F },
+	{ 0x48, 0x3C }, { 0x49, 0x00 }, { 0x4A, 0x1E }, { 0x4C, 0x20 },
+	{ 0x51, 0x10 }, { 0x5E, 0x10 }, { 0x60, 0x27 }, { 0x80, 0x42 },
+	{ 0x81, 0x44 }, { 0x82, 0x04 }, { 0x8B, 0x01 }, { 0x90, 0x06 },
+	{ 0x95, 0x0A }, { 0x96, 0x0C }, { 0x97, 0x05 }, { 0x9A, 0x14 },
+	{ 0x9C, 0x3F }, { 0xA5, 0x19 }, { 0xCC, 0x19 }, { 0xCD, 0x0B },
+	{ 0xCE, 0x13 }, { 0xCF, 0x64 }, { 0xD0, 0x21 }, { 0xEF, 0x01 },
+	{ 0x02, 0x0F }, { 0x03, 0x10 }, { 0x04, 0x02 }, { 0x25, 0x01 },
+	{ 0x27, 0x39 }, { 0x28, 0x7F }, { 0x29, 0x08 }, { 0x3E, 0xFF },
+	{ 0x5E, 0x3D }, { 0x65, 0x96 }, { 0x67, 0x97 }, { 0x69, 0xCD },
+	{ 0x6A, 0x01 }, { 0x6D, 0x2C }, { 0x6E, 0x01 }, { 0x72, 0x01 },
+	{ 0x73, 0x35 }, { 0x74, 0x00 }, { 0x77, 0x01 },
+};
+
+/*
+ * Specific configuration overrides required to enable the internal
+ * 8-gesture state machine.
+ */
+static const struct reg_sequence init_gesture_array[] = {
+	{ 0xEF, 0x00 }, { 0x41, 0x00 }, { 0x42, 0x00 }, { 0xEF, 0x00 },
+	{ 0x48, 0x3C }, { 0x49, 0x00 }, { 0x51, 0x10 }, { 0x83, 0x20 },
+	{ 0x9F, 0xF9 }, { 0xEF, 0x01 }, { 0x01, 0x1E }, { 0x02, 0x0F },
+	{ 0x03, 0x10 }, { 0x04, 0x02 }, { 0x41, 0x40 }, { 0x43, 0x30 },
+	{ 0x65, 0x96 }, { 0x66, 0x00 }, { 0x67, 0x97 }, { 0x68, 0x01 },
+	{ 0x69, 0xCD }, { 0x6A, 0x01 }, { 0x6B, 0xB0 }, { 0x6C, 0x04 },
+	{ 0x6D, 0x2C }, { 0x6E, 0x01 }, { 0x74, 0x00 }, { 0xEF, 0x00 },
+	{ 0x41, 0xFF }, { 0x42, 0x01 },
+};
+
+static const struct reg_sequence paj7620_suspend_regs[] = {
+	{ PAJ7620_REG_BANK_SEL, 0x00 },
+	{ PAJ7620_REG_SLEEP_BANK0, 0x01 },
+	{ PAJ7620_REG_BANK_SEL, 0x01 },
+	{ PAJ7620_REG_SLEEP_BANK1, 0x01 },
+};
+
+static void paj7620_report_keys(struct paj7620_data *data, int gesture)
+{
+	int i;
+
+	for (i = 0; i < PAJ_MAX_GESTURES; i++) {
+		if (gesture & BIT(i)) {
+			int key = data->keymap[i];
+
+			input_report_key(data->idev, key, 1);
+			input_sync(data->idev);
+			input_report_key(data->idev, key, 0);
+			input_sync(data->idev);
+		}
+	}
+}
+
+static irqreturn_t paj7620_irq_thread(int irq, void *ptr)
+{
+	struct paj7620_data *data = ptr;
+	unsigned int g1, g2;
+	int error;
+
+	/* 2. RUNTIME PM: Force awake to read registers */
+	pm_runtime_get_sync(&data->client->dev);
+
+	regmap_write(data->regmap, PAJ7620_REG_BANK_SEL, 0);
+	error = regmap_read(data->regmap, PAJ7620_REG_GES_RESULT1, &g1);
+	error |= regmap_read(data->regmap, PAJ7620_REG_GES_RESULT2, &g2);
+
+	if (!error && (g1 || g2))
+		paj7620_report_keys(data, (g2 << 8) | g1);
+
+	pm_runtime_mark_last_busy(&data->client->dev);
+	pm_runtime_put_autosuspend(&data->client->dev);
+
+	return IRQ_HANDLED;
+}
+
+static int paj7620_init(struct paj7620_data *data)
+{
+	int state = 0, error, i;
+
+	/* 1. Wake-up sequence: Read register 0x00 until it returns 0x20 */
+	for (i = 0; i < 10; i++) {
+		error = regmap_read(data->regmap, 0x00, &state);
+		if (error >= 0 && state == 0x20)
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	if (state != 0x20) {
+		dev_err(&data->client->dev, "Sensor wake-up failed (0x%02x)\n", state);
+		return -ENODEV;
+	}
+
+	/* 2. Blast full register array into PAJ7620 instantly */
+	error = regmap_multi_reg_write(data->regmap, init_register,
+				       ARRAY_SIZE(init_register));
+	if (error < 0) {
+		dev_err(&data->client->dev, "Multi-reg write failed (%d)\n", error);
+		return error;
+	}
+
+	error = regmap_write(data->regmap, PAJ7620_REG_BANK_SEL, 0x00);
+	if (error < 0)
+		return error;
+
+	error = regmap_multi_reg_write(data->regmap, init_gesture_array,
+				       ARRAY_SIZE(init_gesture_array));
+	if (error < 0) {
+		dev_err(&data->client->dev, "Multi-reg write failed (%d)\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int paj7620_input_open(struct input_dev *idev)
+{
+	int error;
+	struct paj7620_data *data = input_get_drvdata(idev);
+
+	error = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
+	if (error)
+		return error;
+
+	error = paj7620_init(data);
+	if (error) {
+		regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
+		return error;
+	}
+
+	return 0;
+}
+
+static void paj7620_input_close(struct input_dev *idev)
+{
+	struct paj7620_data *data = input_get_drvdata(idev);
+
+	regmap_multi_reg_write(data->regmap, paj7620_suspend_regs,
+			       ARRAY_SIZE(paj7620_suspend_regs));
+
+	regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
+}
+
+static int paj7620_runtime_suspend(struct device *dev)
+{
+	int error;
+	struct paj7620_data *data = dev_get_drvdata(dev);
+
+	error = regmap_write(data->regmap, PAJ7620_REG_BANK_SEL, 0x01);
+	if (error)
+		return error;
+
+	error = regmap_write(data->regmap, PAJ7620_REG_AUTO_STANDBY, 0x30);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int paj7620_runtime_resume(struct device *dev)
+{
+	int error;
+	struct paj7620_data *data = dev_get_drvdata(dev);
+
+	error = regmap_write(data->regmap, PAJ7620_REG_BANK_SEL, 0x01);
+	if (error)
+		return error;
+
+	error = regmap_write(data->regmap, PAJ7620_REG_AUTO_STANDBY, 0x00);
+	if (error)
+		return error;
+
+	error = regmap_write(data->regmap, PAJ7620_REG_BANK_SEL, 0x00);
+	if (error)
+		return error;
+
+	usleep_range(1000, 2000);	// Stabilization delay (1ms minimum)
+	return 0;
+}
+
+static const struct dev_pm_ops paj7620_pm_ops = {
+	SET_RUNTIME_PM_OPS(paj7620_runtime_suspend, paj7620_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
+};
+
+static const struct regmap_config paj7620_reg_config = {
+	.reg_bits = 8, .val_bits = 8, .max_register = 0xEF,
+};
+
+static void paj7620_disable_pm(void *dev)
+{
+	pm_runtime_disable(dev);
+	pm_runtime_dont_use_autosuspend(dev);
+}
+
+static int paj7620_probe(struct i2c_client *client)
+{
+	struct paj7620_data *data;
+	int error, i;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	i2c_set_clientdata(client, data);
+
+	data->supplies[0].supply = "vdd";
+	data->supplies[1].supply = "vbus";
+	data->supplies[2].supply = "vled";
+
+	error = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(data->supplies), data->supplies);
+	if (error)
+		return dev_err_probe(&client->dev, error, "Failed to get regulators\n");
+
+	error = device_property_read_u32_array(&client->dev, "linux,keycodes",
+					       data->keymap, ARRAY_SIZE(data->keymap));
+
+	if (error) {
+		data->keymap[0] = KEY_UP;
+		data->keymap[1] = KEY_DOWN;
+		data->keymap[2] = KEY_LEFT;
+		data->keymap[3] = KEY_RIGHT;
+		data->keymap[4] = KEY_ENTER;
+		data->keymap[5] = KEY_BACK;
+		data->keymap[6] = KEY_NEXT;
+		data->keymap[7] = KEY_PREVIOUS;
+		data->keymap[8] = KEY_MENU;
+	}
+
+	data->regmap = devm_regmap_init_i2c(client, &paj7620_reg_config);
+	if (IS_ERR(data->regmap))
+		return PTR_ERR(data->regmap);
+
+	data->idev = devm_input_allocate_device(&client->dev);
+	if (!data->idev)
+		return -ENOMEM;
+
+	data->idev->name = "PAJ7620 Gesture Sensor";
+	data->idev->id.bustype = BUS_I2C;
+	data->idev->open = paj7620_input_open;
+	data->idev->close = paj7620_input_close;
+	data->idev->keycode = data->keymap;
+	data->idev->keycodemax = ARRAY_SIZE(data->keymap);
+	data->idev->keycodesize = sizeof(u32);
+
+	for (i = 0; i < ARRAY_SIZE(data->keymap); i++)
+		input_set_capability(data->idev, EV_KEY, data->keymap[i]);
+
+	input_set_drvdata(data->idev, data);
+
+	error = input_register_device(data->idev);
+	if (error)
+		return error;
+
+	pm_runtime_set_active(&client->dev);
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev, 2000);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	error = devm_add_action_or_reset(&client->dev, paj7620_disable_pm, &client->dev);
+	if (error)
+		return error;
+
+	return devm_request_threaded_irq(&client->dev, client->irq,
+									 NULL, paj7620_irq_thread,
+									 IRQF_ONESHOT, "paj7620",
+									 data);
+}
+
+static const struct of_device_id paj7620_of_match[] = {
+	{ .compatible = "pixart,paj7620" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, paj7620_of_match);
+
+static struct i2c_driver paj7620_driver = {
+	.driver = {
+		.name = "paj7620",
+		.of_match_table = paj7620_of_match,
+		.pm = &paj7620_pm_ops,
+	},
+	.probe = paj7620_probe,
+};
+module_i2c_driver(paj7620_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harpreet Saini");
+MODULE_DESCRIPTION("PAJ7620 Gesture Input Driver");
-- 
2.43.0

Re: [PATCH v3 1/2] dt-bindings: input: Add PixArt PAJ7620 gesture sensor

[Krzysztof Kozlowski]

On Sat, Apr 18, 2026 at 02:22:32AM -0400, Harpreet Saini wrote:
> The binding include mandatory power supplies (vdd, vbus, vled)

Drop this part

> and optional GPIO controller properties to describe the hardware's
> ability to repurpose SPI pins opeating in I2C mode.

And just explain what is the purpose of GPIO controller - is this a GPIO
controller?

Plus language typo, run spell check.

> 
> Signed-off-by: Harpreet Saini <sainiharpreet29@yahoo.com>
> ---
>  .../bindings/input/pixart,paj7620.yaml        | 79 +++++++++++++++++++
>  .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
>  2 files changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/pixart,paj7620.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/pixart,paj7620.yaml b/Documentation/devicetree/bindings/input/pixart,paj7620.yaml
> new file mode 100644
> index 000000000000..ad051cf641a6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/pixart,paj7620.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/pixart,paj7620.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PixArt PAJ7620 Gesture Sensor
> +
> +maintainers:
> +  - Harpreet Saini <sainiharpreet29@yahoo.com>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  The PixArt PAJ7620 is a gesture recognition sensor with an integrated
> +  infrared LED and CMOS array. It communicates over an I2C interface and
> +  provides gesture data via a dedicated interrupt pin.
> +
> +properties:
> +  compatible:
> +    const: pixart,paj7620
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: Main power supply.
> +
> +  vbus-supply:
> +    description: I/O and I2C bus power supply.
> +
> +  vled-supply:
> +    description: Power for the integrated IR LED.
> +
> +  linux,keycodes:
> +    minItems: 9
> +    maxItems: 9
> +    description: |

Do not need '|' unless you need to preserve formatting.

> +      List of keycodes mapping to the 9 supported gestures.
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - vdd-supply
> +  - vbus-supply
> +  - vled-supply
> +

Missing allOf: with $ref to input.yaml schema. You use its properties.

Commit description said SPI, so missing ref to spi-peripheral-props.

> +additionalProperties: false

And this should be then unevaluatedProperties: false.

Best regards,
Krzysztof