[PATCH v2 00/10] gpiolib: fence off legacy interfaces

[PATCH v2 00/10] gpiolib: fence off legacy interfaces

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

This is an update of all the patches that are still required before
we can actually turn off CONFIG_GPIOLIB_LEGACY for most platforms
in the final patch of this series.

I originally posted this as a series in
https://lore.kernel.org/all/20250808151822.536879-1-arnd@kernel.org/

I added more patches for the p54spi driver that I had originally
sent separately and submitted the remaining ones separately to
the subsystem maintainers, with about two thirds getting picked
up so far.

If possible, please apply the patches to the respective
architecture (mips, sh, x86, soc/omap) or subsystem
(wireless, net-next, led, input) trees.

      Arnd

Arnd Bergmann (10):
  [v2] [net-next] net: dsa: b53: hide legacy gpiolib usage on non-mips
  [v3] input: gpio-keys: make legacy gpiolib optional
  [v2] x86/olpc: select GPIOLIB_LEGACY
  [v2] sh: select legacy gpiolib interface
  [v2] mips: select legacy gpiolib interfaces where used
  [v4] leds: gpio: make legacy gpiolib interface optional
  [v6 net-next] dt-bindings: net: add st,stlc4560/p54spi binding
  [v6 net-next] p54spi: convert to devicetree
  [v6 omap] ARM: dts: omap2: add stlc4560 spi-wireless node
  gpiolib: turn off legacy interface by default

Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Bartosz Golaszewski <brgl@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Pavel Machek <pavel@kernel.org>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-wireless@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: netdev@vger.kernel.org

 .../bindings/net/wireless/st,stlc4560.yaml    | 61 +++++++++++++++++
 MAINTAINERS                                   |  1 +
 arch/arm/boot/dts/ti/omap/omap2.dtsi          |  4 ++
 .../dts/ti/omap/omap2420-n8x0-common.dtsi     | 12 ++++
 arch/arm/mach-omap2/board-n8x0.c              | 18 -----
 arch/mips/Kconfig                             |  5 ++
 arch/mips/alchemy/Kconfig                     |  1 -
 arch/mips/txx9/Kconfig                        |  1 +
 arch/sh/Kconfig                               |  1 +
 arch/sh/boards/Kconfig                        |  8 +++
 arch/sh/boards/mach-highlander/Kconfig        |  1 +
 arch/sh/boards/mach-rsk/Kconfig               |  3 +
 arch/x86/Kconfig                              |  1 +
 drivers/gpio/Kconfig                          |  9 ++-
 drivers/input/keyboard/gpio_keys.c            |  7 +-
 drivers/input/keyboard/gpio_keys_polled.c     |  2 +
 drivers/leds/leds-gpio.c                      | 51 +++++++++-----
 drivers/mfd/rohm-bd71828.c                    |  1 -
 drivers/mfd/rohm-bd718x7.c                    |  1 -
 drivers/net/dsa/b53/b53_common.c              | 17 ++---
 drivers/net/dsa/b53/b53_priv.h                | 25 +++++--
 drivers/net/wireless/intersil/p54/p54spi.c    | 67 +++++++------------
 drivers/net/wireless/intersil/p54/p54spi.h    |  3 +
 include/linux/gpio_keys.h                     |  2 +
 include/linux/leds.h                          |  2 +
 sound/pci/Kconfig                             |  1 +
 26 files changed, 201 insertions(+), 104 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml

-- 
2.39.5

[PATCH 01/10] [v2] [net-next] net: dsa: b53: hide legacy gpiolib usage on non-mips

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

The MIPS bcm53xx platform still uses the legacy gpiolib interfaces based
on gpio numbers, but other platforms do not.

Hide these interfaces inside of the existing #ifdef block and use the
modern interfaces in the common parts of the driver to allow building
it when the gpio_set_value() is left out of the kernel.

Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/net/dsa/b53/b53_common.c | 17 +++++------------
 drivers/net/dsa/b53/b53_priv.h   | 25 +++++++++++++++++++------
 2 files changed, 24 insertions(+), 18 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 2c4131ed7e30..d838511ae674 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -19,7 +19,7 @@
 
 #include <linux/delay.h>
 #include <linux/export.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/math.h>
 #include <linux/minmax.h>
@@ -965,17 +965,17 @@ EXPORT_SYMBOL(b53_configure_vlan);
 
 static void b53_switch_reset_gpio(struct b53_device *dev)
 {
-	int gpio = dev->reset_gpio;
+	struct gpio_desc *gpio = dev->reset_gpio;
 
-	if (gpio < 0)
+	if (IS_ERR(gpio))
 		return;
 
 	/* Reset sequence: RESET low(50ms)->high(20ms)
 	 */
-	gpio_set_value(gpio, 0);
+	gpiod_set_value(gpio, 0);
 	mdelay(50);
 
-	gpio_set_value(gpio, 1);
+	gpiod_set_value(gpio, 1);
 	mdelay(20);
 
 	dev->current_page = 0xff;
@@ -3092,7 +3092,6 @@ static int b53_switch_init(struct b53_device *dev)
 {
 	u32 chip_id = dev->chip_id;
 	unsigned int i;
-	int ret;
 
 	if (is63xx(dev))
 		chip_id = BCM63XX_DEVICE_ID;
@@ -3173,12 +3172,6 @@ static int b53_switch_init(struct b53_device *dev)
 		return -ENOMEM;
 
 	dev->reset_gpio = b53_switch_get_reset_gpio(dev);
-	if (dev->reset_gpio >= 0) {
-		ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
-					    GPIOF_OUT_INIT_HIGH, "robo_reset");
-		if (ret)
-			return ret;
-	}
 
 	return 0;
 }
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index bd6849e5bb93..cd27a7344e89 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -148,7 +148,7 @@ struct b53_device {
 	u8 duplex_reg;
 	u8 jumbo_pm_reg;
 	u8 jumbo_size_reg;
-	int reset_gpio;
+	struct gpio_desc *reset_gpio;
 	u8 num_arl_bins;
 	u16 num_arl_buckets;
 	enum dsa_tag_protocol tag_protocol;
@@ -467,23 +467,36 @@ static inline void b53_arl_search_read(struct b53_device *dev, u8 idx,
 #ifdef CONFIG_BCM47XX
 
 #include <linux/bcm47xx_nvram.h>
+#include <linux/gpio.h>
 #include <bcm47xx_board.h>
-static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
+static inline struct gpio_desc *b53_switch_get_reset_gpio(struct b53_device *dev)
 {
 	enum bcm47xx_board board = bcm47xx_board_get();
+	int gpio, ret;
 
 	switch (board) {
 	case BCM47XX_BOARD_LINKSYS_WRT300NV11:
 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
-		return 8;
+		gpio = 8;
+		break;
 	default:
-		return bcm47xx_nvram_gpio_pin("robo_reset");
+		gpio = bcm47xx_nvram_gpio_pin("robo_reset");
 	}
+
+	if (!gpio_is_valid(gpio))
+		return ERR_PTR(-EINVAL);
+
+	ret = devm_gpio_request_one(dev->dev, gpio,
+				    GPIOF_OUT_INIT_HIGH, "robo_reset");
+	if (ret)
+		return ERR_PTR(ret);
+
+	return gpio_to_desc(gpio);
 }
 #else
-static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
+static inline struct gpio_desc *b53_switch_get_reset_gpio(struct b53_device *dev)
 {
-	return -ENOENT;
+	return ERR_PTR(-ENODEV);
 }
 #endif
 
-- 
2.39.5

[PATCH 02/10] [v3] input: gpio-keys: make legacy gpiolib optional

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

Most users of gpio-keys and gpio-keys-polled use modern gpiolib
interfaces, but there are still number of ancient sh, arm32 and x86
machines that have never been converted.

Add an #ifdef block for the parts of the driver that are only used on
those legacy machines.

The two Rohm PMIC drivers use a gpio-keys device without an actual GPIO,
passing an IRQ number instead. In order to keep this working both with
and with CONFIG_GPIOLIB_LEGACY, change the gpio-keys driver to ignore
the gpio number if an IRQ is passed.

Link: https://lore.kernel.org/all/b3c94552-c104-42e3-be15-7e8362e8039e@gmail.com/
Link: https://lore.kernel.org/all/afJXG4_rtaj3l2Dk@google.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v3: resend
v2: skip the fake GPIO number passing from mfd

The removal of the arm platforms using this is not yet going to happen
for 7.2, and Dmitry's changes for the Rohm drivers have not yet
made it into linux-next as of 2026-05-20, so for the moment I
would still like to see this patch get merged, even if we are
closing in on completely removing the legacy gpio support in
the gpio_keys driver, so we can make CONFIG_GPIOLIB_LEGACY
default-disabled sooner.
---
 drivers/input/keyboard/gpio_keys.c        | 7 ++++---
 drivers/input/keyboard/gpio_keys_polled.c | 2 ++
 drivers/mfd/rohm-bd71828.c                | 1 -
 drivers/mfd/rohm-bd718x7.c                | 1 -
 include/linux/gpio_keys.h                 | 2 ++
 5 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index e19617485679..d748a54dc51c 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -528,7 +528,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 			 */
 			bdata->gpiod = NULL;
 		}
-	} else if (gpio_is_valid(button->gpio)) {
+#ifdef CONFIG_GPIOLIB_LEGACY
+	} else if (!button->irq && gpio_is_valid(button->gpio)) {
 		/*
 		 * Legacy GPIO number, so request the GPIO here and
 		 * convert it to descriptor.
@@ -546,6 +547,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 
 		if (button->active_low ^ gpiod_is_active_low(bdata->gpiod))
 			gpiod_toggle_active_low(bdata->gpiod);
+#endif
 	}
 
 	if (bdata->gpiod) {
@@ -583,8 +585,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 			if (irq < 0) {
 				error = irq;
 				dev_err_probe(dev, error,
-					      "Unable to get irq number for GPIO %d\n",
-					      button->gpio);
+					      "Unable to get irq number for GPIO\n");
 				return error;
 			}
 			bdata->irq = irq;
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index e6707d72210e..0ae0e53910ea 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -301,6 +301,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 				return dev_err_probe(dev, PTR_ERR(bdata->gpiod),
 						     "failed to get gpio\n");
 			}
+#ifdef CONFIG_GPIOLIB_LEGACY
 		} else if (gpio_is_valid(button->gpio)) {
 			/*
 			 * Legacy GPIO number so request the GPIO here and
@@ -323,6 +324,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 
 			if (button->active_low ^ gpiod_is_active_low(bdata->gpiod))
 				gpiod_toggle_active_low(bdata->gpiod);
+#endif
 		}
 
 		bdata->last_state = -1;
diff --git a/drivers/mfd/rohm-bd71828.c b/drivers/mfd/rohm-bd71828.c
index a79f354bf5cb..df6dad762ec9 100644
--- a/drivers/mfd/rohm-bd71828.c
+++ b/drivers/mfd/rohm-bd71828.c
@@ -39,7 +39,6 @@
 
 static struct gpio_keys_button button = {
 	.code = KEY_POWER,
-	.gpio = -1,
 	.type = EV_KEY,
 	.wakeup = 1,
 };
diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c
index ff714fd4f54d..dd774aa8828b 100644
--- a/drivers/mfd/rohm-bd718x7.c
+++ b/drivers/mfd/rohm-bd718x7.c
@@ -20,7 +20,6 @@
 
 static struct gpio_keys_button button = {
 	.code = KEY_POWER,
-	.gpio = -1,
 	.type = EV_KEY,
 };
 
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index 80fa930b04c6..e8d6dc290efb 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -25,7 +25,9 @@ struct device;
  */
 struct gpio_keys_button {
 	unsigned int code;
+#ifdef CONFIG_GPIOLIB_LEGACY
 	int gpio;
+#endif
 	int active_low;
 	const char *desc;
 	unsigned int type;
-- 
2.39.5

[PATCH 03/10] [v2] x86/olpc: select GPIOLIB_LEGACY

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

The OLPC GPIO controller sets up a fixed number space that is used
by at least two drivers:

arch/x86/platform/olpc/olpc-xo1-sci.c: In function 'setup_ec_sci':
arch/x86/platform/olpc/olpc-xo1-sci.c:358:13: error: implicit declaration of function 'gpio_request' [-Wimplicit-function-declaration]
  358 |         r = gpio_request(OLPC_GPIO_ECSCI, "OLPC-ECSCI");
      |             ^~~~~~~~~~~~
sound/pci/cs5535audio/cs5535audio_olpc.c: In function 'olpc_analog_input':
sound/pci/cs5535audio/cs5535audio_olpc.c:41:9: error: implicit declaration of function 'gpio_set_value'; did you mean 'gpiod_set_value'? [-Wimplicit-function-declaration]
   41 |         gpio_set_value(OLPC_GPIO_MIC_AC, on);

The AMD Geode platform that this is based on is now marked as
'Orphaned' in Kconfig, and it is likely that there are no XO1
users on modern kernels, but so far there is no consensus on
removing it entirely.

Select CONFIG_GPIOLIB_LEGACY for this platform and make sure the
sound driver portion cannot be compiled without this.

Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2: update changelog text
---
 arch/x86/Kconfig  | 1 +
 sound/pci/Kconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f24810015234..69089d2f5dad 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2978,6 +2978,7 @@ config OLPC
 	bool "One Laptop Per Child support"
 	depends on !X86_PAE
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select OF
 	select OF_PROMTREE
 	select IRQ_DOMAIN
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index e0996a9d90b0..6366f72b3667 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -300,6 +300,7 @@ config SND_CS5535AUDIO
 	tristate "CS5535/CS5536 Audio"
 	depends on X86_32 || MIPS || COMPILE_TEST
 	depends on HAS_IOPORT
+	depends on GPIOLIB_LEGACY || !OLPC
 	select SND_PCM
 	select SND_AC97_CODEC
 	help
-- 
2.39.5

[PATCH 04/10] [v2] sh: select legacy gpiolib interface

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

Many board files on sh reference the legacy gpiolib interfaces that
are becoming optional. To ensure the boards can keep building, select
CONFIG_GPIOLIB_LEGACY on each of the boards that have one of the
hardcoded calls.

Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2: no changes. Adrian said he'll pick it up for 7.2, but so
    far the patch is not in linux-next yet, so I'm including it
    for completeness here.
---
 arch/sh/Kconfig                        | 1 +
 arch/sh/boards/Kconfig                 | 8 ++++++++
 arch/sh/boards/mach-highlander/Kconfig | 1 +
 arch/sh/boards/mach-rsk/Kconfig        | 3 +++
 4 files changed, 13 insertions(+)

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index d5795067befa..d60f1d5a94c0 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -462,6 +462,7 @@ config CPU_SUBTYPE_SHX3
 	select CPU_SHX3
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select PINCTRL
 
 # SH4AL-DSP Processor Support
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 1af93be61b1f..d89b74177233 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -80,6 +80,7 @@ config SH_7724_SOLUTION_ENGINE
 	select SOLUTION_ENGINE
 	depends on CPU_SUBTYPE_SH7724
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	imply SND_SOC_AK4642 if SND_SIMPLE_CARD
 	help
@@ -199,6 +200,7 @@ config SH_SH7757LCR
 	bool "SH7757LCR"
 	depends on CPU_SUBTYPE_SH7757
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config SH_SH7785LCR
@@ -226,6 +228,7 @@ config SH_URQUELL
 	bool "Urquell"
 	depends on CPU_SUBTYPE_SH7786
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select HAVE_PCI
 	select NO_IOPORT_MAP if !PCI
 
@@ -233,6 +236,7 @@ config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
 	  Select Migo-R if configuring for the SH7722 Migo-R platform
@@ -242,6 +246,7 @@ config SH_AP325RXA
 	bool "AP-325RXA"
 	depends on CPU_SUBTYPE_SH7723
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
 	  Renesas "AP-325RXA" support.
@@ -251,6 +256,7 @@ config SH_KFR2R09
 	bool "KFR2R09"
 	depends on CPU_SUBTYPE_SH7724
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
 	  "Kit For R2R for 2009" support.
@@ -259,6 +265,7 @@ config SH_ECOVEC
 	bool "EcoVec"
 	depends on CPU_SUBTYPE_SH7724
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	imply SND_SOC_DA7210 if SND_SIMPLE_CARD
 	help
@@ -329,6 +336,7 @@ config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
 	depends on CPU_SUBTYPE_SH7720
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
 	  Select Magic Panel R2 if configuring for Magic Panel R2.
diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index b0abd03cac4e..cd3a553ce30c 100644
--- a/arch/sh/boards/mach-highlander/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
@@ -20,6 +20,7 @@ config SH_R7785RP
 	bool "R7785RP board support"
 	depends on CPU_SUBTYPE_SH7785
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 
 endchoice
 
diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig
index f0299bc4416f..3810937aa5d4 100644
--- a/arch/sh/boards/mach-rsk/Kconfig
+++ b/arch/sh/boards/mach-rsk/Kconfig
@@ -12,16 +12,19 @@ config SH_RSK7201
 config SH_RSK7203
 	bool "RSK7203"
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	depends on CPU_SUBTYPE_SH7203
 
 config SH_RSK7264
 	bool "RSK2+SH7264"
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	depends on CPU_SUBTYPE_SH7264
 
 config SH_RSK7269
 	bool "RSK2+SH7269"
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	depends on CPU_SUBTYPE_SH7269
 
 endchoice
-- 
2.39.5

[PATCH 05/10] [v2] mips: select legacy gpiolib interfaces where used

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

A few old machines have not been converted away from the old-style
gpiolib interfaces. Make these select the new CONFIG_GPIOLIB_LEGACY
symbol so the code still works where it is needed but can be left
out otherwise.

This is the list of all gpio_request() calls in mips:

  arch/mips/alchemy/devboards/db1000.c:           gpio_request(19, "sd0_cd");
  arch/mips/alchemy/devboards/db1000.c:           gpio_request(20, "sd1_cd");
  arch/mips/alchemy/devboards/db1200.c:   gpio_request(215, "otg-vbus");
  arch/mips/bcm47xx/workarounds.c:        err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
  arch/mips/bcm63xx/boards/board_bcm963xx.c:              gpio_request_one(board.ephy_reset_gpio,
  arch/mips/txx9/rbtx4927/setup.c:        gpio_request(15, "sio-dtr");

Most of these should be easy enough to change to modern gpio descriptors
or remove if they are no longer in use.

Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2: no changes. There was no discussion on this, but the patch
    has so far not made it into the linux-mips tree, so I'm including
    it for completeness.
---
 arch/mips/Kconfig         | 5 +++++
 arch/mips/alchemy/Kconfig | 1 -
 arch/mips/txx9/Kconfig    | 1 +
 3 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4364f3dba688..b91e62d69a5d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -206,6 +206,8 @@ config MIPS_ALCHEMY
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
 	select DMA_NONCOHERENT		# Au1000,1500,1100 aren't, rest is
+	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select MIPS_FIXUP_BIGPHYS_ADDR if PCI
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -307,6 +309,7 @@ config BCM47XX
 	select SYS_HAS_EARLY_PRINTK
 	select USE_GENERIC_EARLY_PRINTK_8250
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select LEDS_GPIO_REGISTER
 	select BCM47XX_NVRAM
 	select BCM47XX_SPROM
@@ -330,6 +333,7 @@ config BCM63XX
 	select SYS_HAS_CPU_BMIPS4380
 	select SWAP_IO_SPACE
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select MIPS_L1_CACHE_SHIFT_4
 	select HAVE_LEGACY_CLK
 	help
@@ -999,6 +1003,7 @@ config MIKROTIK_RB532
 	select SWAP_IO_SPACE
 	select BOOT_RAW
 	select GPIOLIB
+	select GPIOLIB_LEGACY
 	select MIPS_L1_CACHE_SHIFT_4
 	help
 	  Support the Mikrotik(tm) RouterBoard 532 series,
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 6ca81e1bd35c..cf5ad52c0a0f 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -12,7 +12,6 @@ config MIPS_MTX1
 
 config MIPS_DB1XXX
 	bool "Alchemy DB1XXX / PB1XXX boards"
-	select GPIOLIB
 	select HAVE_PCI
 	select HAVE_PATA_PLATFORM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 7335efa4d528..92b759a434c0 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -37,6 +37,7 @@ config SOC_TX4927
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
+	select GPIOLIB_LEGACY
 
 config SOC_TX4938
 	bool
-- 
2.39.5

[PATCH 06/10] [v4] leds: gpio: make legacy gpiolib interface optional

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

There are still a handful of ancient mips/armv5/sh boards that use the
gpio_led:gpio member to pass an old-style gpio number, but all modern
users have been converted to gpio descriptors.

While the CONFIG_GPIOLIB_LEGACY option that guards devm_gpio_request_one()
and related helpers is currently turned on in all kernel builds,
the plan is to only enable it on the few platforms that actually
pass gpio numbers in any platform_data.

Split out the legacy portion of the platform_data handling into a custom
helper function that is guarded with in #ifdef block, to allow the
the leds-gpio driver to compile cleanly when CONFIG_GPIOLIB_LEGACY
gets turned off. Once the last user is converted, this function can
be removed.

Link: https://lore.kernel.org/all/e9252384-a55c-4a91-9c61-06e05a0b2ce4@app.fastmail.com/
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v4: whitespace changes only
v3: simplify gpio_led_get_gpiod
v2: rework a little bit to keep the legacy code path more separate,
    extend changelog description

Related to this, we may also want to remove support for passing
a gpio descriptor in the ->gpiod flag. The only user doing this
at the moment was introduced in commit 1892e87a3e91 ("powerpc/warp:
switch to using gpiod API").
---
 drivers/leds/leds-gpio.c | 51 ++++++++++++++++++++++++++--------------
 include/linux/leds.h     |  2 ++
 2 files changed, 36 insertions(+), 17 deletions(-)

diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index a3428b22de3a..d6a0369eeb92 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -212,7 +212,6 @@ static struct gpio_desc *gpio_led_get_gpiod(struct device *dev, int idx,
 					    const struct gpio_led *template)
 {
 	struct gpio_desc *gpiod;
-	int ret;
 
 	/*
 	 * This means the LED does not come from the device tree
@@ -221,18 +220,30 @@ static struct gpio_desc *gpio_led_get_gpiod(struct device *dev, int idx,
 	 * the GPIO from there.
 	 */
 	gpiod = devm_gpiod_get_index_optional(dev, NULL, idx, GPIOD_OUT_LOW);
-	if (IS_ERR(gpiod))
-		return gpiod;
-	if (gpiod) {
+	if (!IS_ERR(gpiod))
 		gpiod_set_consumer_name(gpiod, template->name);
-		return gpiod;
-	}
 
-	/*
-	 * This is the legacy code path for platform code that
-	 * still uses GPIO numbers. Ultimately we would like to get
-	 * rid of this block completely.
-	 */
+	return gpiod;
+}
+
+#ifdef CONFIG_GPIOLIB_LEGACY
+/*
+ * This is the legacy code path for platform code that still uses
+ * GPIO numbers, mainly MIPS and SuperH board files.
+ * Ultimately we would like to get rid of this block completely.
+ *
+ * ppc44x-warp sets the template->gpiod directly instead of
+ * adding a lookup table or device properties. This is not
+ * much better.
+ */
+static struct gpio_desc *gpio_led_get_legacy_gpiod(struct device *dev, int idx,
+						   const struct gpio_led *template)
+{
+	struct gpio_desc *gpiod;
+	int ret;
+
+	if (template->gpiod)
+		return template->gpiod;
 
 	/* skip leds that aren't available */
 	if (!gpio_is_valid(template->gpio))
@@ -252,6 +263,13 @@ static struct gpio_desc *gpio_led_get_gpiod(struct device *dev, int idx,
 
 	return gpiod;
 }
+#else
+static struct gpio_desc *gpio_led_get_legacy_gpiod(struct device *dev, int idx,
+						   const struct gpio_led *template)
+{
+	return template->gpiod ?: ERR_PTR(-ENOENT);
+}
+#endif
 
 static int gpio_led_probe(struct platform_device *pdev)
 {
@@ -270,14 +288,13 @@ static int gpio_led_probe(struct platform_device *pdev)
 			const struct gpio_led *template = &pdata->leds[i];
 			struct gpio_led_data *led_dat = &priv->leds[i];
 
-			if (template->gpiod)
-				led_dat->gpiod = template->gpiod;
-			else
+			led_dat->gpiod = gpio_led_get_gpiod(dev, i, template);
+			if (!led_dat->gpiod)
 				led_dat->gpiod =
-					gpio_led_get_gpiod(dev, i, template);
+					 gpio_led_get_legacy_gpiod(dev, i, template);
 			if (IS_ERR(led_dat->gpiod)) {
-				dev_info(dev, "Skipping unavailable LED gpio %d (%s)\n",
-					 template->gpio, template->name);
+				dev_info(dev, "Skipping unavailable LED gpio %s\n",
+					 template->name);
 				continue;
 			}
 
diff --git a/include/linux/leds.h b/include/linux/leds.h
index b16b803cc1ac..e646bffcd8e7 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -676,8 +676,10 @@ typedef int (*gpio_blink_set_t)(struct gpio_desc *desc, int state,
 struct gpio_led {
 	const char *name;
 	const char *default_trigger;
+#ifdef CONFIG_GPIOLIB_LEGACY
 	unsigned 	gpio;
 	unsigned	active_low : 1;
+#endif
 	unsigned	retain_state_suspended : 1;
 	unsigned	panic_indicator : 1;
 	unsigned	default_state : 2;
-- 
2.39.5

[PATCH 07/10] [v6 net-next] dt-bindings: net: add st,stlc4560/p54spi binding

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

The SPI version of Prism54 was sold under a couple of different
names and supported by the Linux p54spi driver, but there was
never a DT binding for it.

Document the four known names of this device and the properties
that are sufficient for its use on the Nokia N8x0 tablet.

As I don't have this hardware or documentation for it, this is
purely based on existing usage in the driver.

Link: https://lore.kernel.org/all/e8dc9acb-6f85-e0a9-a145-d101ca6da201@gmail.com/
Acked-by: Christian Lamparter <chunkeey@gmail.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v6: no changes
v5: fix name in MAINTAINERS file
v4: renamed file to st,stlc4560, matching the primary compatible string
    require st,stlc4560 string
---
 .../bindings/net/wireless/st,stlc4560.yaml    | 61 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml

diff --git a/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml b/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml
new file mode 100644
index 000000000000..a32265c07350
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/st,stlc4560.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST/Intersil/Conexant stlc45xx/p54spi/cx3110x SPI wireless device
+
+maintainers:
+  - Christian Lamparter <chunkeey@gmail.com>
+
+description:
+  The SPI variant of the Intersil Prism54 wireless device was sold
+  under a variety of names, including Conexant CX3110x and
+  ST Microelectronics STLC4560.
+
+allOf:
+  - $ref: ieee80211.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: st,stlc4560
+      - items:
+          - enum:
+              - cnxt,3110x
+              - isil,p54spi
+              - st,stlc4550
+          - const: st,stlc4560
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@0 {
+            compatible = "st,stlc4560";
+            reg = <0>;
+            spi-max-frequency = <48000000>;
+            interrupts-extended = <&gpio 23>;
+            powerdown-gpios = <&gpio 1>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 8063cb56feef..93cf1fb72357 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20306,6 +20306,7 @@ M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 W:	https://wireless.wiki.kernel.org/en/users/Drivers/p54
+F:	Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml
 F:	drivers/net/wireless/intersil/
 
 PACKET SOCKETS
-- 
2.39.5

[PATCH 08/10] [v6 net-next] p54spi: convert to devicetree

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

The Prism54 SPI driver hardcodes GPIO numbers and expects users to
pass them as module parameters, apparently a relic from its life as a
staging driver. This works because there is only one user, the Nokia
N8x0 tablet.

Convert this to the gpio descriptor interface and DT based probing
to improve this and simplify the code at the same time.

Acked-by: Christian Lamparter <chunkeey@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v6:
 - no changes. Sashiko comments about incorrect on-stack SPI transfers
   and error handling in the IRQ registration turned out to be
   irrelevant for this submission.

v5:
 - fix irq assignment # https://sashiko.dev/#/patchset/20260430081242.3686993-1-arnd%40kernel.org

v4:
 - make gpio line optional again
 - fix EPROBE_DEFER handling
 - match only st,stlc4560 compatible value, with binding change

v3:
 - rebase an older patch
---
 arch/arm/mach-omap2/board-n8x0.c           | 18 ------
 drivers/net/wireless/intersil/p54/p54spi.c | 67 ++++++++--------------
 drivers/net/wireless/intersil/p54/p54spi.h |  3 +
 3 files changed, 26 insertions(+), 62 deletions(-)

diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 969265d5d5c6..d9acd32c5457 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -20,7 +20,6 @@
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
 #include <linux/mmc/host.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/mmc-omap.h>
 #include <linux/mfd/menelaus.h>
 
@@ -106,21 +105,6 @@ static void __init n8x0_usb_init(void) {}
 
 #endif /*CONFIG_USB_MUSB_TUSB6010 */
 
-
-static struct omap2_mcspi_device_config p54spi_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct spi_board_info n800_spi_board_info[] __initdata = {
-	{
-		.modalias	= "p54spi",
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.max_speed_hz   = 48000000,
-		.controller_data = &p54spi_mcspi_config,
-	},
-};
-
 #if defined(CONFIG_MENELAUS) && IS_ENABLED(CONFIG_MMC_OMAP)
 
 /*
@@ -524,7 +508,5 @@ omap_late_initcall(n8x0_late_initcall);
 void * __init n8x0_legacy_init(void)
 {
 	board_check_revision();
-	spi_register_board_info(n800_spi_board_info,
-				ARRAY_SIZE(n800_spi_board_info));
 	return &mmc1_data;
 }
diff --git a/drivers/net/wireless/intersil/p54/p54spi.c b/drivers/net/wireless/intersil/p54/p54spi.c
index 9d66dcae54e0..d18be2545028 100644
--- a/drivers/net/wireless/intersil/p54/p54spi.c
+++ b/drivers/net/wireless/intersil/p54/p54spi.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/firmware.h>
@@ -15,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/spi/spi.h>
 #include <linux/etherdevice.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 
 #include "p54spi.h"
@@ -30,19 +31,6 @@
 MODULE_FIRMWARE("3826.arm");
 MODULE_FIRMWARE("3826.eeprom");
 
-/* gpios should be handled in board files and provided via platform data,
- * but because it's currently impossible for p54spi to have a header file
- * in include/linux, let's use module parameters for now
- */
-
-static int p54spi_gpio_power = 97;
-module_param(p54spi_gpio_power, int, 0444);
-MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
-
-static int p54spi_gpio_irq = 87;
-module_param(p54spi_gpio_irq, int, 0444);
-MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
-
 static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
 			      void *buf, size_t len)
 {
@@ -262,14 +250,14 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev)
 
 static void p54spi_power_off(struct p54s_priv *priv)
 {
-	disable_irq(gpio_to_irq(p54spi_gpio_irq));
-	gpio_set_value(p54spi_gpio_power, 0);
+	disable_irq(priv->irq);
+	gpiod_set_value(priv->gpio_powerdown, 1);
 }
 
 static void p54spi_power_on(struct p54s_priv *priv)
 {
-	gpio_set_value(p54spi_gpio_power, 1);
-	enable_irq(gpio_to_irq(p54spi_gpio_irq));
+	gpiod_set_value(priv->gpio_powerdown, 0);
+	enable_irq(priv->irq);
 
 	/* need to wait a while before device can be accessed, the length
 	 * is just a guess
@@ -608,31 +596,20 @@ static int p54spi_probe(struct spi_device *spi)
 		goto err_free;
 	}
 
-	ret = gpio_request(p54spi_gpio_power, "p54spi power");
-	if (ret < 0) {
-		dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
+	priv->gpio_powerdown = gpiod_get_optional(&spi->dev, "powerdown", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->gpio_powerdown)) {
+		ret = dev_err_probe(&priv->spi->dev, PTR_ERR(priv->gpio_powerdown),
+				    "powerdown GPIO request failed\n");
 		goto err_free;
 	}
 
-	ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
-	if (ret < 0) {
-		dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
-		goto err_free_gpio_power;
-	}
-
-	gpio_direction_output(p54spi_gpio_power, 0);
-	gpio_direction_input(p54spi_gpio_irq);
-
-	ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
-			  p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi",
-			  priv->spi);
+	ret = request_irq(spi->irq, p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi", priv->spi);
 	if (ret < 0) {
 		dev_err(&priv->spi->dev, "request_irq() failed");
-		goto err_free_gpio_irq;
+		goto err_free_gpio_power;
 	}
 
-	irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
-
+	priv->irq = spi->irq;
 	INIT_WORK(&priv->work, p54spi_work);
 	init_completion(&priv->fw_comp);
 	INIT_LIST_HEAD(&priv->tx_pending);
@@ -659,11 +636,9 @@ static int p54spi_probe(struct spi_device *spi)
 
 err_free_common:
 	release_firmware(priv->firmware);
-	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
-err_free_gpio_irq:
-	gpio_free(p54spi_gpio_irq);
+	free_irq(priv->irq, spi);
 err_free_gpio_power:
-	gpio_free(p54spi_gpio_power);
+	gpiod_put(priv->gpio_powerdown);
 err_free:
 	p54_free_common(priv->hw);
 	return ret;
@@ -675,10 +650,8 @@ static void p54spi_remove(struct spi_device *spi)
 
 	p54_unregister_common(priv->hw);
 
-	free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
-
-	gpio_free(p54spi_gpio_power);
-	gpio_free(p54spi_gpio_irq);
+	free_irq(priv->irq, spi);
+	gpiod_put(priv->gpio_powerdown);
 	release_firmware(priv->firmware);
 
 	mutex_destroy(&priv->mutex);
@@ -686,10 +659,16 @@ static void p54spi_remove(struct spi_device *spi)
 	p54_free_common(priv->hw);
 }
 
+static const struct of_device_id p54spi_of_ids[] = {
+	{ .compatible = "st,stlc4560", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, p54spi_of_ids);
 
 static struct spi_driver p54spi_driver = {
 	.driver = {
 		.name		= "p54spi",
+		.of_match_table = p54spi_of_ids,
 	},
 
 	.probe		= p54spi_probe,
diff --git a/drivers/net/wireless/intersil/p54/p54spi.h b/drivers/net/wireless/intersil/p54/p54spi.h
index e5619a13fd61..118785cc635a 100644
--- a/drivers/net/wireless/intersil/p54/p54spi.h
+++ b/drivers/net/wireless/intersil/p54/p54spi.h
@@ -107,6 +107,9 @@ struct p54s_priv {
 
 	enum fw_state fw_state;
 	const struct firmware *firmware;
+
+	struct gpio_desc *gpio_powerdown;
+	int irq;
 };
 
 #endif /* P54SPI_H */
-- 
2.39.5

[PATCH 09/10] [v6 omap] ARM: dts: omap2: add stlc4560 spi-wireless node

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

Converted from the platform_device creation in board-n8x0.c.

Link: https://lore.kernel.org/all/20230314163201.955689-1-arnd@kernel.org/
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v6: no changes
v1 through v5: adaptations that correspond to the binding updates
---
 arch/arm/boot/dts/ti/omap/omap2.dtsi                |  4 ++++
 arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi | 12 ++++++++++++
 2 files changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/ti/omap/omap2.dtsi b/arch/arm/boot/dts/ti/omap/omap2.dtsi
index afabb36a8ac1..fdc1790adf43 100644
--- a/arch/arm/boot/dts/ti/omap/omap2.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2.dtsi
@@ -129,6 +129,8 @@ i2c2: i2c@48072000 {
 		};
 
 		mcspi1: spi@48098000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi1";
 			reg = <0x48098000 0x100>;
@@ -140,6 +142,8 @@ mcspi1: spi@48098000 {
 		};
 
 		mcspi2: spi@4809a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi2";
 			reg = <0x4809a000 0x100>;
diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
index 63b0b4921e4e..fe9dd8bbfc85 100644
--- a/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
@@ -109,3 +109,15 @@ partition@5 {
 		};
 	};
 };
+
+&mcspi2 {
+	status = "okay";
+
+	wifi@0 {
+		reg = <0>;
+		compatible = "st,stlc4560";
+		spi-max-frequency = <48000000>;
+		interrupts-extended = <&gpio3 23 IRQ_TYPE_EDGE_RISING>;
+		powerdown-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* gpio 97 */
+	};
+};
-- 
2.39.5

[PATCH 10/10] gpiolib: turn off legacy interface by default

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

All users of the legacy interface now select CONFIG_GPIOLIB_LEGACY,
so it can be turned off by default and only get built on platforms
that still have one unconverted driver.

Allow turning it on manually for compile testing, in order to keep
the build coverage of the legacy drivers in allmodconfig and
randconfig.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/gpio/Kconfig | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

This patch depends on patches 1 through 9 to be applied first.

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 00fcab5d09a4..eec17089eaa6 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -4,7 +4,14 @@
 #
 
 config GPIOLIB_LEGACY
-	def_bool y
+	bool "Legacy GPIO interfaces" if COMPILE_TEST
+	help
+	  There are a few legacy platforms that use the traditional GPIO
+	  number based interfaces instead of GPIO descriptors.
+	  Say Y here to enable build testing drivers that are specific
+	  to those platforms.
+
+	  If unsure, say N.
 
 config HAVE_SHARED_GPIOS
 	bool
-- 
2.39.5

Re: [PATCH 09/10] [v6 omap] ARM: dts: omap2: add stlc4560 spi-wireless node

[Johannes Berg]

On Wed, 2026-05-20 at 20:38 +0200, Arnd Bergmann wrote:
> 
> v1 through v5: adaptations that correspond to the binding updates

FWIW, I had just applied v5 of these three patches today, but didn't
send out a pull request yet. I'll do that tomorrow morning.

johannes

Re: [PATCH 09/10] [v6 omap] ARM: dts: omap2: add stlc4560 spi-wireless node

[Andreas Kemnade]

On Wed, 20 May 2026 20:38:14 +0200
Arnd Bergmann <arnd@kernel.org> wrote:

> From: Arnd Bergmann <arnd@arndb.de>
> 
> Converted from the platform_device creation in board-n8x0.c.
> 
> Link: https://lore.kernel.org/all/20230314163201.955689-1-arnd@kernel.org/
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Linus Walleij <linusw@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> v6: no changes
> v1 through v5: adaptations that correspond to the binding updates
> ---
>  arch/arm/boot/dts/ti/omap/omap2.dtsi                |  4 ++++
>  arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi | 12 ++++++++++++
>  2 files changed, 16 insertions(+)
> 
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>