[PATCH v2 0/6] HID: iio: warning clean up and prefer kernel coding style

[PATCH v2 0/6] HID: iio: warning clean up and prefer kernel coding style

[Sanjay Chitroda via B4 Relay]

Hi all,

This series updates HID sensor IIO drivers to address checkpatch
warnings, improves readability and compliance with kernel coding style.

The changes are:
  - replacing explicit NULL comparisons with implicit pointer checks;
  - adjusting indentation and alignment;
  - reformatting multi-line function declarations for improved
    readability and consistency.
  - use common device for devres framework;

While updating alignment and line wrapping, function parameters are
grouped more logically and common callback signatures are formatted
consistently across HID sensor IIO drivers.

Testing:
  - Compiled with W=1 for each patch in the series

---
   Changes in v2:
   - Following input from Joshua and Maxwell squash all related changes
     in single change as this is code churn.
   - Following input from Andy (re-)split function argument/parameter
     logically.
   - Added review tag of Maxwell to implicit NULL check change while
     drop for parenthesis alignemnt to have a fresh review.
   - Link to v1: https://lore.kernel.org/all/20260616-15-jun-hid-iio-alignment-v1-0-0cd544286575@gmail.com

To: Jonathan Cameron <jic23@kernel.org>
To: David Lechner <dlechner@baylibre.com>
To: Nuno Sá <nuno.sa@analog.com>
To: Andy Shevchenko <andy@kernel.org>
To: Jiri Kosina <jikos@kernel.org>
To: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-input@vger.kernel.org

---
Sanjay Chitroda (6):
      iio: hid-sensors: add/remove blank line
      iio: hid-sensors: align function parenthesis for readability
      iio: hid-sensors: Use implicit NULL pointer checks
      iio: humidity: hid-sensor-humidity: use common device for devres
      iio: position: hid-sensor-custom-intel-hinge: use common device for devres
      iio: temperature: hid-sensor-temperature: use common device for devres

 drivers/iio/accel/hid-sensor-accel-3d.c            | 48 ++++++------
 .../iio/common/hid-sensors/hid-sensor-attributes.c | 89 +++++++++++-----------
 .../iio/common/hid-sensors/hid-sensor-trigger.c    |  5 +-
 .../iio/common/hid-sensors/hid-sensor-trigger.h    |  2 +-
 drivers/iio/gyro/hid-sensor-gyro-3d.c              | 54 ++++++-------
 drivers/iio/humidity/hid-sensor-humidity.c         | 49 ++++++------
 drivers/iio/light/hid-sensor-als.c                 | 32 ++++----
 drivers/iio/light/hid-sensor-prox.c                | 29 +++----
 drivers/iio/magnetometer/hid-sensor-magn-3d.c      | 76 +++++++++---------
 drivers/iio/orientation/hid-sensor-incl-3d.c       | 33 ++++----
 drivers/iio/orientation/hid-sensor-rotation.c      | 26 +++----
 .../iio/position/hid-sensor-custom-intel-hinge.c   | 15 ++--
 drivers/iio/pressure/hid-sensor-press.c            | 35 ++++-----
 drivers/iio/temperature/hid-sensor-temperature.c   | 42 +++++-----
 14 files changed, 252 insertions(+), 283 deletions(-)
---
base-commit: 16f3a4a21cab16dc9242a2e0749b026e1f2c5706
change-id: 20260615-15-jun-hid-iio-alignment-46bba7279be3

Best regards,
--  
Sanjay Chitroda <sanjayembeddedse@gmail.com>

[PATCH v2 1/6] iio: hid-sensors: add/remove blank line

[Sanjay Chitroda via B4 Relay]

From: Sanjay Chitroda <sanjayembeddedse@gmail.com>

Add a blank line after variable declarations and remove multiple blank
line across HID sensor IIO drivers to improve readability and align
with kernel coding style.

Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
---
 drivers/iio/common/hid-sensors/hid-sensor-attributes.c | 1 -
 drivers/iio/common/hid-sensors/hid-sensor-trigger.c    | 3 +++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
index c115a72832b2..2f0a1ea42f48 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -282,7 +282,6 @@ int hid_sensor_read_raw_hyst_rel_value(struct hid_sensor_common *st, int *val1,
 }
 EXPORT_SYMBOL_NS(hid_sensor_read_raw_hyst_rel_value, "IIO_HID");
 
-
 int hid_sensor_write_raw_hyst_value(struct hid_sensor_common *st,
 					int val1, int val2)
 {
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 417c4ab8c1b2..c8ccf96f3d03 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -314,7 +314,9 @@ static int __maybe_unused hid_sensor_resume(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+
 	schedule_work(&attrb->work);
+
 	return 0;
 }
 
@@ -322,6 +324,7 @@ static int __maybe_unused hid_sensor_runtime_resume(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+
 	return _hid_sensor_power_state(attrb, true);
 }
 

-- 
2.34.1

Re: [PATCH v2 1/6] iio: hid-sensors: add/remove blank line

[Jonathan Cameron]

On Thu, 02 Jul 2026 21:47:58 +0530
Sanjay Chitroda via B4 Relay <devnull+sanjayembeddedse.gmail.com@kernel.org> wrote:

> From: Sanjay Chitroda <sanjayembeddedse@gmail.com>
> 
> Add a blank line after variable declarations and remove multiple blank
> line across HID sensor IIO drivers to improve readability and align
> with kernel coding style.
> 
> Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
> ---
Given this one is small enough that the churn concern isn't relevant.
Applied.

Thanks,

Jonathan

>  drivers/iio/common/hid-sensors/hid-sensor-attributes.c | 1 -
>  drivers/iio/common/hid-sensors/hid-sensor-trigger.c    | 3 +++
>  2 files changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> index c115a72832b2..2f0a1ea42f48 100644
> --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> @@ -282,7 +282,6 @@ int hid_sensor_read_raw_hyst_rel_value(struct hid_sensor_common *st, int *val1,
>  }
>  EXPORT_SYMBOL_NS(hid_sensor_read_raw_hyst_rel_value, "IIO_HID");
>  
> -
>  int hid_sensor_write_raw_hyst_value(struct hid_sensor_common *st,
>  					int val1, int val2)
>  {
> diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> index 417c4ab8c1b2..c8ccf96f3d03 100644
> --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> @@ -314,7 +314,9 @@ static int __maybe_unused hid_sensor_resume(struct device *dev)
>  {
>  	struct iio_dev *indio_dev = dev_get_drvdata(dev);
>  	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
> +
>  	schedule_work(&attrb->work);
> +
>  	return 0;
>  }
>  
> @@ -322,6 +324,7 @@ static int __maybe_unused hid_sensor_runtime_resume(struct device *dev)
>  {
>  	struct iio_dev *indio_dev = dev_get_drvdata(dev);
>  	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
> +
>  	return _hid_sensor_power_state(attrb, true);
>  }
>  
> 

[PATCH v2 2/6] iio: hid-sensors: align function parenthesis for readability

[Sanjay Chitroda via B4 Relay]

From: Sanjay Chitroda <sanjayembeddedse@gmail.com>

Adjust alignment of parentheses across HID sensor IIO drivers to
improve readability and maintain consistency with kernel coding style.

While updating the formatting, group related arguments consistently in
multi-line function signatures where appropriate.

No functional change intended.

Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
---
 drivers/iio/accel/hid-sensor-accel-3d.c            | 46 ++++++-----
 .../iio/common/hid-sensors/hid-sensor-attributes.c | 88 +++++++++++-----------
 .../iio/common/hid-sensors/hid-sensor-trigger.c    |  2 +-
 .../iio/common/hid-sensors/hid-sensor-trigger.h    |  2 +-
 drivers/iio/gyro/hid-sensor-gyro-3d.c              | 54 ++++++-------
 drivers/iio/humidity/hid-sensor-humidity.c         | 47 ++++++------
 drivers/iio/light/hid-sensor-als.c                 | 32 ++++----
 drivers/iio/light/hid-sensor-prox.c                | 29 +++----
 drivers/iio/magnetometer/hid-sensor-magn-3d.c      | 74 +++++++++---------
 drivers/iio/orientation/hid-sensor-incl-3d.c       | 31 ++++----
 drivers/iio/orientation/hid-sensor-rotation.c      | 24 +++---
 .../iio/position/hid-sensor-custom-intel-hinge.c   | 13 ++--
 drivers/iio/pressure/hid-sensor-press.c            | 35 ++++-----
 drivers/iio/temperature/hid-sensor-temperature.c   | 38 +++++-----
 14 files changed, 241 insertions(+), 274 deletions(-)

diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index 42c4259bf209..9197f3424c0c 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -122,9 +122,8 @@ static const struct iio_chan_spec gravity_channels[] = {
 
 /* Channel read_raw handler */
 static int accel_3d_read_raw(struct iio_dev *indio_dev,
-			      struct iio_chan_spec const *chan,
-			      int *val, int *val2,
-			      long mask)
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
 {
 	struct accel_3d_state *accel_state = iio_priv(indio_dev);
 	int report_id = -1;
@@ -151,7 +150,7 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
 		else {
 			*val = 0;
 			hid_sensor_power_state(&accel_state->common_attributes,
-						 false);
+					       false);
 			return -EINVAL;
 		}
 		hid_sensor_power_state(&accel_state->common_attributes, false);
@@ -184,10 +183,8 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
 
 /* Channel write_raw handler */
 static int accel_3d_write_raw(struct iio_dev *indio_dev,
-			       struct iio_chan_spec const *chan,
-			       int val,
-			       int val2,
-			       long mask)
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
 {
 	struct accel_3d_state *accel_state = iio_priv(indio_dev);
 	int ret = 0;
@@ -223,8 +220,7 @@ static void hid_sensor_push_data(struct iio_dev *indio_dev, void *data,
 
 /* Callback handler to send event after all samples are received and captured */
 static int accel_3d_proc_event(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				void *priv)
+			       u32 usage_id, void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct accel_3d_state *accel_state = iio_priv(indio_dev);
@@ -247,9 +243,9 @@ static int accel_3d_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int accel_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				size_t raw_len, char *raw_data,
-				void *priv)
+				   u32 usage_id,
+				   size_t raw_len, char *raw_data,
+				   void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct accel_3d_state *accel_state = iio_priv(indio_dev);
@@ -281,10 +277,10 @@ static int accel_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 /* Parse report which is specific to an usage id*/
 static int accel_3d_parse_report(struct platform_device *pdev,
-				struct hid_sensor_hub_device *hsdev,
-				struct iio_chan_spec *channels,
-				u32 usage_id,
-				struct accel_3d_state *st)
+				 struct hid_sensor_hub_device *hsdev,
+				 struct iio_chan_spec *channels,
+				 u32 usage_id,
+				 struct accel_3d_state *st)
 {
 	int ret;
 
@@ -303,10 +299,10 @@ static int accel_3d_parse_report(struct platform_device *pdev,
 		};
 	}
 	dev_dbg(&pdev->dev, "accel_3d %x:%x, %x:%x, %x:%x\n",
-			st->accel[0].index,
-			st->accel[0].report_id,
-			st->accel[1].index, st->accel[1].report_id,
-			st->accel[2].index, st->accel[2].report_id);
+		st->accel[0].index,
+		st->accel[0].report_id,
+		st->accel[1].index, st->accel[1].report_id,
+		st->accel[2].index, st->accel[2].report_id);
 
 	st->scale_precision = hid_sensor_format_scale(
 				hsdev->usage,
@@ -366,8 +362,8 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 	ret = accel_3d_parse_report(pdev, hsdev,
-				(struct iio_chan_spec *)indio_dev->channels,
-				hsdev->usage, accel_state);
+				    (struct iio_chan_spec *)indio_dev->channels,
+				    hsdev->usage, accel_state);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to setup attributes\n");
 		return ret;
@@ -380,7 +376,7 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
 	atomic_set(&accel_state->common_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-					&accel_state->common_attributes);
+				       &accel_state->common_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		return ret;
@@ -396,7 +392,7 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
 	accel_state->callbacks.capture_sample = accel_3d_capture_sample;
 	accel_state->callbacks.pdev = pdev;
 	ret = sensor_hub_register_callback(hsdev, hsdev->usage,
-					&accel_state->callbacks);
+					   &accel_state->callbacks);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "callback reg failed\n");
 		goto error_iio_unreg;
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
index 2f0a1ea42f48..13fa55e966f4 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -72,8 +72,7 @@ static const struct {
 	{HID_USAGE_SENSOR_HUMAN_ATTENTION, 0, 1, 0},
 };
 
-static void simple_div(int dividend, int divisor, int *whole,
-				int *micro_frac)
+static void simple_div(int dividend, int divisor, int *whole, int *micro_frac)
 {
 	int rem;
 	int exp = 0;
@@ -111,7 +110,7 @@ for 10^-2.
 Negative numbers are 2's complement
 */
 static void convert_from_vtf_format(u32 value, int size, int exp,
-					int *val1, int *val2)
+				    int *val1, int *val2)
 {
 	int sign = 1;
 
@@ -176,7 +175,7 @@ s32 hid_sensor_read_poll_value(struct hid_sensor_common *st)
 EXPORT_SYMBOL_NS(hid_sensor_read_poll_value, "IIO_HID_ATTRIBUTES");
 
 int hid_sensor_read_samp_freq_value(struct hid_sensor_common *st,
-				int *val1, int *val2)
+				    int *val1, int *val2)
 {
 	s32 value;
 	int ret;
@@ -203,7 +202,7 @@ int hid_sensor_read_samp_freq_value(struct hid_sensor_common *st,
 EXPORT_SYMBOL_NS(hid_sensor_read_samp_freq_value, "IIO_HID");
 
 int hid_sensor_write_samp_freq_value(struct hid_sensor_common *st,
-				int val1, int val2)
+				     int val1, int val2)
 {
 	s32 value;
 	int ret;
@@ -238,15 +237,15 @@ int hid_sensor_write_samp_freq_value(struct hid_sensor_common *st,
 EXPORT_SYMBOL_NS(hid_sensor_write_samp_freq_value, "IIO_HID");
 
 int hid_sensor_read_raw_hyst_value(struct hid_sensor_common *st,
-				int *val1, int *val2)
+				   int *val1, int *val2)
 {
 	s32 value;
 	int ret;
 
 	ret = sensor_hub_get_feature(st->hsdev,
 				     st->sensitivity.report_id,
-				     st->sensitivity.index, sizeof(value),
-				     &value);
+				     st->sensitivity.index,
+				     sizeof(value), &value);
 	if (ret < 0 || value < 0) {
 		*val1 = *val2 = 0;
 		return -EINVAL;
@@ -268,8 +267,8 @@ int hid_sensor_read_raw_hyst_rel_value(struct hid_sensor_common *st, int *val1,
 
 	ret = sensor_hub_get_feature(st->hsdev,
 				     st->sensitivity_rel.report_id,
-				     st->sensitivity_rel.index, sizeof(value),
-				     &value);
+				     st->sensitivity_rel.index,
+				     sizeof(value), &value);
 	if (ret < 0 || value < 0) {
 		*val1 = *val2 = 0;
 		return -EINVAL;
@@ -283,7 +282,7 @@ int hid_sensor_read_raw_hyst_rel_value(struct hid_sensor_common *st, int *val1,
 EXPORT_SYMBOL_NS(hid_sensor_read_raw_hyst_rel_value, "IIO_HID");
 
 int hid_sensor_write_raw_hyst_value(struct hid_sensor_common *st,
-					int val1, int val2)
+				    int val1, int val2)
 {
 	s32 value;
 	int ret;
@@ -292,8 +291,8 @@ int hid_sensor_write_raw_hyst_value(struct hid_sensor_common *st,
 		return -EINVAL;
 
 	value = convert_to_vtf_format(st->sensitivity.size,
-				st->sensitivity.unit_expo,
-				val1, val2);
+				      st->sensitivity.unit_expo,
+				      val1, val2);
 	ret = sensor_hub_set_feature(st->hsdev, st->sensitivity.report_id,
 				     st->sensitivity.index, sizeof(value),
 				     &value);
@@ -302,8 +301,8 @@ int hid_sensor_write_raw_hyst_value(struct hid_sensor_common *st,
 
 	ret = sensor_hub_get_feature(st->hsdev,
 				     st->sensitivity.report_id,
-				     st->sensitivity.index, sizeof(value),
-				     &value);
+				     st->sensitivity.index,
+				     sizeof(value), &value);
 	if (ret < 0 || value < 0)
 		return -EINVAL;
 
@@ -323,8 +322,8 @@ int hid_sensor_write_raw_hyst_rel_value(struct hid_sensor_common *st,
 		return -EINVAL;
 
 	value = convert_to_vtf_format(st->sensitivity_rel.size,
-				st->sensitivity_rel.unit_expo,
-				val1, val2);
+				      st->sensitivity_rel.unit_expo,
+				      val1, val2);
 	ret = sensor_hub_set_feature(st->hsdev, st->sensitivity_rel.report_id,
 				     st->sensitivity_rel.index, sizeof(value),
 				     &value);
@@ -333,8 +332,8 @@ int hid_sensor_write_raw_hyst_rel_value(struct hid_sensor_common *st,
 
 	ret = sensor_hub_get_feature(st->hsdev,
 				     st->sensitivity_rel.report_id,
-				     st->sensitivity_rel.index, sizeof(value),
-				     &value);
+				     st->sensitivity_rel.index,
+				     sizeof(value), &value);
 	if (ret < 0 || value < 0)
 		return -EINVAL;
 
@@ -355,8 +354,8 @@ EXPORT_SYMBOL_NS(hid_sensor_write_raw_hyst_rel_value, "IIO_HID");
  * 1.001745329 ->exp:4-> val0[10017]val1[453290000]
  * 9.806650000 ->exp:-2-> val0[0]val1[98066500]
  */
-static void adjust_exponent_nano(int *val0, int *val1, int scale0,
-				  int scale1, int exp)
+static void adjust_exponent_nano(int *val0, int *val1,
+				 int scale0, int scale1, int exp)
 {
 	int divisor;
 	int i;
@@ -403,8 +402,8 @@ static void adjust_exponent_nano(int *val0, int *val1, int scale0,
 }
 
 int hid_sensor_format_scale(u32 usage_id,
-			struct hid_sensor_hub_attribute_info *attr_info,
-			int *val0, int *val1)
+			    struct hid_sensor_hub_attribute_info *attr_info,
+			    int *val0, int *val1)
 {
 	int i;
 	int exp;
@@ -414,9 +413,8 @@ int hid_sensor_format_scale(u32 usage_id,
 
 	for (i = 0; i < ARRAY_SIZE(unit_conversion); ++i) {
 		if (unit_conversion[i].usage_id == usage_id &&
-			unit_conversion[i].unit == attr_info->units) {
-			exp  = hid_sensor_convert_exponent(
-						attr_info->unit_expo);
+		    unit_conversion[i].unit == attr_info->units) {
+			exp  = hid_sensor_convert_exponent(attr_info->unit_expo);
 			adjust_exponent_nano(val0, val1,
 					unit_conversion[i].scale_val0,
 					unit_conversion[i].scale_val1, exp);
@@ -437,8 +435,8 @@ EXPORT_SYMBOL_NS(hid_sensor_convert_timestamp, "IIO_HID");
 
 static
 int hid_sensor_get_reporting_interval(struct hid_sensor_hub_device *hsdev,
-					u32 usage_id,
-					struct hid_sensor_common *st)
+				      u32 usage_id,
+				      struct hid_sensor_common *st)
 {
 	sensor_hub_input_get_attribute_info(hsdev,
 					HID_FEATURE_REPORT, usage_id,
@@ -472,9 +470,10 @@ int hid_sensor_get_report_latency(struct hid_sensor_common *st)
 	int ret;
 	int value;
 
-	ret = sensor_hub_get_feature(st->hsdev, st->report_latency.report_id,
-				     st->report_latency.index, sizeof(value),
-				     &value);
+	ret = sensor_hub_get_feature(st->hsdev,
+				     st->report_latency.report_id,
+				     st->report_latency.index,
+				     sizeof(value), &value);
 	if (ret < 0)
 		return ret;
 
@@ -497,10 +496,10 @@ bool hid_sensor_batch_mode_supported(struct hid_sensor_common *st)
 EXPORT_SYMBOL_NS(hid_sensor_batch_mode_supported, "IIO_HID_ATTRIBUTES");
 
 int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
-					u32 usage_id,
-					struct hid_sensor_common *st,
-					const u32 *sensitivity_addresses,
-					u32 sensitivity_addresses_len)
+				       u32 usage_id,
+				       struct hid_sensor_common *st,
+				       const u32 *sensitivity_addresses,
+				       u32 sensitivity_addresses_len)
 {
 
 	struct hid_sensor_hub_attribute_info timestamp;
@@ -511,14 +510,14 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
 	hid_sensor_get_reporting_interval(hsdev, usage_id, st);
 
 	sensor_hub_input_get_attribute_info(hsdev,
-					HID_FEATURE_REPORT, usage_id,
-					HID_USAGE_SENSOR_PROP_REPORT_STATE,
-					&st->report_state);
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_PROP_REPORT_STATE,
+			&st->report_state);
 
 	sensor_hub_input_get_attribute_info(hsdev,
-					HID_FEATURE_REPORT, usage_id,
-					HID_USAGE_SENSOR_PROY_POWER_STATE,
-					&st->power_state);
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_PROY_POWER_STATE,
+			&st->power_state);
 
 	st->power_state.logical_minimum = 1;
 	st->report_state.logical_minimum = 1;
@@ -526,7 +525,7 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
 	sensor_hub_input_get_attribute_info(hsdev,
 			HID_FEATURE_REPORT, usage_id,
 			HID_USAGE_SENSOR_PROP_SENSITIVITY_ABS,
-			 &st->sensitivity);
+			&st->sensitivity);
 
 	sensor_hub_input_get_attribute_info(hsdev,
 			HID_FEATURE_REPORT, usage_id,
@@ -577,8 +576,9 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
 		timestamp.index, timestamp.report_id);
 
 	ret = sensor_hub_get_feature(hsdev,
-				st->power_state.report_id,
-				st->power_state.index, sizeof(value), &value);
+				     st->power_state.report_id,
+				     st->power_state.index,
+				     sizeof(value), &value);
 	if (ret < 0)
 		return ret;
 	if (value < 0)
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index c8ccf96f3d03..fffaebe8c7f0 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -233,7 +233,7 @@ void hid_sensor_remove_trigger(struct iio_dev *indio_dev,
 EXPORT_SYMBOL_NS(hid_sensor_remove_trigger, "IIO_HID");
 
 int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
-				struct hid_sensor_common *attrb)
+			     struct hid_sensor_common *attrb)
 {
 	const struct iio_dev_attr **fifo_attrs;
 	int ret;
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
index f94fca4f1edf..589de858e369 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.h
@@ -15,7 +15,7 @@ struct iio_dev;
 extern const struct dev_pm_ops hid_sensor_pm_ops;
 
 int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
-				struct hid_sensor_common *attrb);
+			     struct hid_sensor_common *attrb);
 void hid_sensor_remove_trigger(struct iio_dev *indio_dev,
 			       struct hid_sensor_common *attrb);
 int hid_sensor_power_state(struct hid_sensor_common *st, bool state);
diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
index bbca2111e79b..0dba475845d7 100644
--- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
+++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
@@ -85,9 +85,8 @@ static const struct iio_chan_spec gyro_3d_channels[] = {
 
 /* Channel read_raw handler */
 static int gyro_3d_read_raw(struct iio_dev *indio_dev,
-			      struct iio_chan_spec const *chan,
-			      int *val, int *val2,
-			      long mask)
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
 {
 	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
 	int report_id = -1;
@@ -112,8 +111,7 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
 					min < 0);
 		else {
 			*val = 0;
-			hid_sensor_power_state(&gyro_state->common_attributes,
-						false);
+			hid_sensor_power_state(&gyro_state->common_attributes, false);
 			return -EINVAL;
 		}
 		hid_sensor_power_state(&gyro_state->common_attributes, false);
@@ -146,10 +144,8 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
 
 /* Channel write_raw handler */
 static int gyro_3d_write_raw(struct iio_dev *indio_dev,
-			       struct iio_chan_spec const *chan,
-			       int val,
-			       int val2,
-			       long mask)
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
 {
 	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
 	int ret = 0;
@@ -177,8 +173,7 @@ static const struct iio_info gyro_3d_info = {
 
 /* Callback handler to send event after all samples are received and captured */
 static int gyro_3d_proc_event(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				void *priv)
+			      u32 usage_id, void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
@@ -199,9 +194,9 @@ static int gyro_3d_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int gyro_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				size_t raw_len, char *raw_data,
-				void *priv)
+				  u32 usage_id,
+				  size_t raw_len, char *raw_data,
+				  void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
@@ -240,11 +235,12 @@ static int gyro_3d_parse_report(struct platform_device *pdev,
 	int ret;
 
 	for (unsigned int ch = CHANNEL_SCAN_INDEX_X; ch <= CHANNEL_SCAN_INDEX_Z; ch++) {
-		ret = sensor_hub_input_get_attribute_info(hsdev,
-				HID_INPUT_REPORT,
-				usage_id,
-				HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS + ch,
-				&st->gyro[ch]);
+		ret = sensor_hub_input_get_attribute_info(
+			hsdev,
+			HID_INPUT_REPORT,
+			usage_id,
+			HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS + ch,
+			&st->gyro[ch]);
 		if (ret < 0)
 			break;
 		channels[ch].scan_type = (struct iio_scan_type) {
@@ -254,10 +250,10 @@ static int gyro_3d_parse_report(struct platform_device *pdev,
 		};
 	}
 	dev_dbg(&pdev->dev, "gyro_3d %x:%x, %x:%x, %x:%x\n",
-			st->gyro[0].index,
-			st->gyro[0].report_id,
-			st->gyro[1].index, st->gyro[1].report_id,
-			st->gyro[2].index, st->gyro[2].report_id);
+		st->gyro[0].index,
+		st->gyro[0].report_id,
+		st->gyro[1].index, st->gyro[1].report_id,
+		st->gyro[2].index, st->gyro[2].report_id);
 
 	st->scale_precision = hid_sensor_format_scale(
 				HID_USAGE_SENSOR_GYRO_3D,
@@ -286,10 +282,10 @@ static int hid_gyro_3d_probe(struct platform_device *pdev)
 	gyro_state->common_attributes.pdev = pdev;
 
 	ret = hid_sensor_parse_common_attributes(hsdev,
-						HID_USAGE_SENSOR_GYRO_3D,
-						&gyro_state->common_attributes,
-						gyro_3d_sensitivity_addresses,
-						ARRAY_SIZE(gyro_3d_sensitivity_addresses));
+						 HID_USAGE_SENSOR_GYRO_3D,
+						 &gyro_state->common_attributes,
+						 gyro_3d_sensitivity_addresses,
+						 ARRAY_SIZE(gyro_3d_sensitivity_addresses));
 	if (ret) {
 		dev_err(&pdev->dev, "failed to setup common attributes\n");
 		return ret;
@@ -318,7 +314,7 @@ static int hid_gyro_3d_probe(struct platform_device *pdev)
 	atomic_set(&gyro_state->common_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-					&gyro_state->common_attributes);
+				       &gyro_state->common_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		return ret;
@@ -334,7 +330,7 @@ static int hid_gyro_3d_probe(struct platform_device *pdev)
 	gyro_state->callbacks.capture_sample = gyro_3d_capture_sample;
 	gyro_state->callbacks.pdev = pdev;
 	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D,
-					&gyro_state->callbacks);
+					   &gyro_state->callbacks);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "callback reg failed\n");
 		goto error_iio_unreg;
diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c
index c376a247b137..8dd8bc0b3ba1 100644
--- a/drivers/iio/humidity/hid-sensor-humidity.c
+++ b/drivers/iio/humidity/hid-sensor-humidity.c
@@ -45,7 +45,7 @@ static const struct iio_chan_spec humidity_channels[] = {
 
 /* Adjust channel real bits based on report descriptor */
 static void humidity_adjust_channel_bit_mask(struct iio_chan_spec *channels,
-					int channel, int size)
+					     int channel, int size)
 {
 	channels[channel].scan_type.sign = 's';
 	/* Real storage bits will change based on the report desc. */
@@ -55,8 +55,8 @@ static void humidity_adjust_channel_bit_mask(struct iio_chan_spec *channels,
 }
 
 static int humidity_read_raw(struct iio_dev *indio_dev,
-				struct iio_chan_spec const *chan,
-				int *val, int *val2, long mask)
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
 {
 	struct hid_humidity_state *humid_st = iio_priv(indio_dev);
 
@@ -101,8 +101,8 @@ static int humidity_read_raw(struct iio_dev *indio_dev,
 }
 
 static int humidity_write_raw(struct iio_dev *indio_dev,
-				struct iio_chan_spec const *chan,
-				int val, int val2, long mask)
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
 {
 	struct hid_humidity_state *humid_st = iio_priv(indio_dev);
 
@@ -127,7 +127,7 @@ static const struct iio_info humidity_info = {
 
 /* Callback handler to send event after all samples are received and captured */
 static int humidity_proc_event(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id, void *pdev)
+			       u32 usage_id, void *pdev)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct hid_humidity_state *humid_st = iio_priv(indio_dev);
@@ -141,8 +141,9 @@ static int humidity_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id, size_t raw_len,
-				char *raw_data, void *pdev)
+				   u32 usage_id,
+				   size_t raw_len, char *raw_data,
+				   void *pdev)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct hid_humidity_state *humid_st = iio_priv(indio_dev);
@@ -159,17 +160,17 @@ static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 /* Parse report which is specific to an usage id */
 static int humidity_parse_report(struct platform_device *pdev,
-				struct hid_sensor_hub_device *hsdev,
-				struct iio_chan_spec *channels,
-				u32 usage_id,
-				struct hid_humidity_state *st)
+				 struct hid_sensor_hub_device *hsdev,
+				 struct iio_chan_spec *channels,
+				 u32 usage_id,
+				 struct hid_humidity_state *st)
 {
 	int ret;
 
 	ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
-					usage_id,
-					HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
-					&st->humidity_attr);
+						  usage_id,
+						  HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
+						  &st->humidity_attr);
 	if (ret < 0)
 		return ret;
 
@@ -208,20 +209,20 @@ static int hid_humidity_probe(struct platform_device *pdev)
 	humid_st->common_attributes.pdev = pdev;
 
 	ret = hid_sensor_parse_common_attributes(hsdev,
-					HID_USAGE_SENSOR_HUMIDITY,
-					&humid_st->common_attributes,
-					humidity_sensitivity_addresses,
-					ARRAY_SIZE(humidity_sensitivity_addresses));
+						 HID_USAGE_SENSOR_HUMIDITY,
+						 &humid_st->common_attributes,
+						 humidity_sensitivity_addresses,
+						 ARRAY_SIZE(humidity_sensitivity_addresses));
 	if (ret)
 		return ret;
 
 	humid_chans = devm_kmemdup(&indio_dev->dev, humidity_channels,
-					sizeof(humidity_channels), GFP_KERNEL);
+				   sizeof(humidity_channels), GFP_KERNEL);
 	if (!humid_chans)
 		return -ENOMEM;
 
 	ret = humidity_parse_report(pdev, hsdev, humid_chans,
-				HID_USAGE_SENSOR_HUMIDITY, humid_st);
+				    HID_USAGE_SENSOR_HUMIDITY, humid_st);
 	if (ret)
 		return ret;
 
@@ -234,7 +235,7 @@ static int hid_humidity_probe(struct platform_device *pdev)
 	atomic_set(&humid_st->common_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-				&humid_st->common_attributes);
+				       &humid_st->common_attributes);
 	if (ret)
 		return ret;
 
@@ -242,7 +243,7 @@ static int hid_humidity_probe(struct platform_device *pdev)
 
 	humidity_callbacks.pdev = pdev;
 	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY,
-					&humidity_callbacks);
+					   &humidity_callbacks);
 	if (ret)
 		goto error_remove_trigger;
 
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index ae2fda8dc500..85a1ef55c616 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -120,9 +120,8 @@ static const struct iio_chan_spec als_channels[] = {
 
 /* Channel read_raw handler */
 static int als_read_raw(struct iio_dev *indio_dev,
-			      struct iio_chan_spec const *chan,
-			      int *val, int *val2,
-			      long mask)
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
 {
 	struct als_state *als_state = iio_priv(indio_dev);
 	struct hid_sensor_hub_device *hsdev = als_state->common_attributes.hsdev;
@@ -163,12 +162,12 @@ static int als_read_raw(struct iio_dev *indio_dev,
 		}
 		if (report_id >= 0) {
 			hid_sensor_power_state(&als_state->common_attributes,
-						true);
+					       true);
 			*val = sensor_hub_input_attr_get_raw_value(
 					hsdev, hsdev->usage, address, report_id,
 					SENSOR_HUB_SYNC, min < 0);
 			hid_sensor_power_state(&als_state->common_attributes,
-						false);
+					       false);
 		} else {
 			*val = 0;
 			return -EINVAL;
@@ -206,10 +205,8 @@ static int als_read_raw(struct iio_dev *indio_dev,
 
 /* Channel write_raw handler */
 static int als_write_raw(struct iio_dev *indio_dev,
-			       struct iio_chan_spec const *chan,
-			       int val,
-			       int val2,
-			       long mask)
+			 struct iio_chan_spec const *chan,
+			 int val, int val2, long mask)
 {
 	struct als_state *als_state = iio_priv(indio_dev);
 	int ret = 0;
@@ -241,8 +238,7 @@ static const struct iio_info als_info = {
 
 /* Callback handler to send event after all samples are received and captured */
 static int als_proc_event(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				void *priv)
+			  u32 usage_id, void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct als_state *als_state = iio_priv(indio_dev);
@@ -263,9 +259,9 @@ static int als_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				size_t raw_len, char *raw_data,
-				void *priv)
+			      u32 usage_id,
+			      size_t raw_len, char *raw_data,
+			      void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct als_state *als_state = iio_priv(indio_dev);
@@ -304,9 +300,9 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 /* Parse report which is specific to an usage id*/
 static int als_parse_report(struct platform_device *pdev,
-				struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				struct als_state *st)
+			    struct hid_sensor_hub_device *hsdev,
+			    u32 usage_id,
+			    struct als_state *st)
 {
 	struct iio_chan_spec *channels;
 	int ret, index = 0;
@@ -400,7 +396,7 @@ static int hid_als_probe(struct platform_device *pdev)
 	atomic_set(&als_state->common_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-				&als_state->common_attributes);
+				       &als_state->common_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		return ret;
diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c
index 9059f00f0ced..dd8dddce46ec 100644
--- a/drivers/iio/light/hid-sensor-prox.c
+++ b/drivers/iio/light/hid-sensor-prox.c
@@ -70,9 +70,8 @@ static const struct iio_chan_spec prox_channels[] = {
 
 /* Channel read_raw handler */
 static int prox_read_raw(struct iio_dev *indio_dev,
-			      struct iio_chan_spec const *chan,
-			      int *val, int *val2,
-			      long mask)
+			 struct iio_chan_spec const *chan,
+			 int *val, int *val2, long mask)
 {
 	struct prox_state *prox_state = iio_priv(indio_dev);
 	struct hid_sensor_hub_device *hsdev;
@@ -135,10 +134,8 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 
 /* Channel write_raw handler */
 static int prox_write_raw(struct iio_dev *indio_dev,
-			       struct iio_chan_spec const *chan,
-			       int val,
-			       int val2,
-			       long mask)
+			  struct iio_chan_spec const *chan,
+			  int val, int val2, long mask)
 {
 	struct prox_state *prox_state = iio_priv(indio_dev);
 	int ret = 0;
@@ -166,8 +163,7 @@ static const struct iio_info prox_info = {
 
 /* Callback handler to send event after all samples are received and captured */
 static int prox_proc_event(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				void *priv)
+			   u32 usage_id, void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct prox_state *prox_state = iio_priv(indio_dev);
@@ -183,9 +179,9 @@ static int prox_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int prox_capture_sample(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				size_t raw_len, char *raw_data,
-				void *priv)
+			       u32 usage_id,
+			       size_t raw_len, char *raw_data,
+			       void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct prox_state *prox_state = iio_priv(indio_dev);
@@ -218,8 +214,8 @@ static int prox_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 /* Parse report which is specific to an usage id*/
 static int prox_parse_report(struct platform_device *pdev,
-				struct hid_sensor_hub_device *hsdev,
-				struct prox_state *st)
+			     struct hid_sensor_hub_device *hsdev,
+			     struct prox_state *st)
 {
 	struct iio_chan_spec *channels = st->channels;
 	int index = 0;
@@ -271,8 +267,7 @@ static int hid_prox_probe(struct platform_device *pdev)
 	struct iio_dev *indio_dev;
 	struct prox_state *prox_state;
 
-	indio_dev = devm_iio_device_alloc(&pdev->dev,
-				sizeof(struct prox_state));
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct prox_state));
 	if (!indio_dev)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, indio_dev);
@@ -306,7 +301,7 @@ static int hid_prox_probe(struct platform_device *pdev)
 	atomic_set(&prox_state->common_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-				&prox_state->common_attributes);
+				       &prox_state->common_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		return ret;
diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index 23884825eb00..ad10fa20fae0 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -135,9 +135,8 @@ static const struct iio_chan_spec magn_3d_channels[] = {
 
 /* Channel read_raw handler */
 static int magn_3d_read_raw(struct iio_dev *indio_dev,
-			      struct iio_chan_spec const *chan,
-			      int *val, int *val2,
-			      long mask)
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
 {
 	struct magn_3d_state *magn_state = iio_priv(indio_dev);
 	int report_id = -1;
@@ -167,8 +166,7 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
 				false);
 			return -EINVAL;
 		}
-		hid_sensor_power_state(&magn_state->magn_flux_attributes,
-					false);
+		hid_sensor_power_state(&magn_state->magn_flux_attributes, false);
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
@@ -229,10 +227,8 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
 
 /* Channel write_raw handler */
 static int magn_3d_write_raw(struct iio_dev *indio_dev,
-			       struct iio_chan_spec const *chan,
-			       int val,
-			       int val2,
-			       long mask)
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
 {
 	struct magn_3d_state *magn_state = iio_priv(indio_dev);
 	int ret = 0;
@@ -270,8 +266,7 @@ static const struct iio_info magn_3d_info = {
 
 /* Callback handler to send event after all samples are received and captured */
 static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				void *priv)
+			      u32 usage_id, void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct magn_3d_state *magn_state = iio_priv(indio_dev);
@@ -292,9 +287,9 @@ static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				size_t raw_len, char *raw_data,
-				void *priv)
+				  u32 usage_id,
+				  size_t raw_len, char *raw_data,
+				  void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct magn_3d_state *magn_state = iio_priv(indio_dev);
@@ -353,11 +348,12 @@ static int magn_3d_parse_report(struct platform_device *pdev,
 		u32 address = magn_3d_addresses[i];
 
 		/* Check if usage attribute exists in the sensor hub device */
-		status = sensor_hub_input_get_attribute_info(hsdev,
-			HID_INPUT_REPORT,
-			usage_id,
-			address,
-			&(st->magn[i]));
+		status = sensor_hub_input_get_attribute_info(
+				hsdev,
+				HID_INPUT_REPORT,
+				usage_id,
+				address,
+				&(st->magn[i]));
 		if (!status)
 			attr_count++;
 	}
@@ -368,18 +364,17 @@ static int magn_3d_parse_report(struct platform_device *pdev,
 		return  -EINVAL;
 	}
 
-	dev_dbg(&pdev->dev, "magn_3d Found %d usage attributes\n",
-			attr_count);
+	dev_dbg(&pdev->dev, "magn_3d Found %d usage attributes\n", attr_count);
 	dev_dbg(&pdev->dev, "magn_3d X: %x:%x Y: %x:%x Z: %x:%x\n",
-			st->magn[0].index,
-			st->magn[0].report_id,
-			st->magn[1].index, st->magn[1].report_id,
-			st->magn[2].index, st->magn[2].report_id);
+		st->magn[0].index,
+		st->magn[0].report_id,
+		st->magn[1].index, st->magn[1].report_id,
+		st->magn[2].index, st->magn[2].report_id);
 
 	/* Setup IIO channel array */
 	_channels = devm_kcalloc(&pdev->dev, attr_count,
-				sizeof(struct iio_chan_spec),
-				GFP_KERNEL);
+				 sizeof(struct iio_chan_spec),
+				 GFP_KERNEL);
 	if (!_channels) {
 		dev_err(&pdev->dev,
 			"failed to allocate space for iio channels\n");
@@ -426,8 +421,7 @@ static int magn_3d_parse_report(struct platform_device *pdev,
 
 	*channels = _channels;
 
-	dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n",
-			*chan_count);
+	dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n", *chan_count);
 
 	st->magn_flux_attr.scale_precision = hid_sensor_format_scale(
 				HID_USAGE_SENSOR_COMPASS_3D,
@@ -442,7 +436,8 @@ static int magn_3d_parse_report(struct platform_device *pdev,
 			&st->rot_attr.scale_post_decml);
 
 	if (st->rot_attributes.sensitivity.index < 0) {
-		sensor_hub_input_get_attribute_info(hsdev,
+		sensor_hub_input_get_attribute_info(
+			hsdev,
 			HID_FEATURE_REPORT, usage_id,
 			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
 			HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
@@ -477,11 +472,12 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 	magn_state->magn_flux_attributes.hsdev = hsdev;
 	magn_state->magn_flux_attributes.pdev = pdev;
 
-	ret = hid_sensor_parse_common_attributes(hsdev,
-				HID_USAGE_SENSOR_COMPASS_3D,
-				&magn_state->magn_flux_attributes,
-				magn_3d_sensitivity_addresses,
-				ARRAY_SIZE(magn_3d_sensitivity_addresses));
+	ret = hid_sensor_parse_common_attributes(
+		hsdev,
+		HID_USAGE_SENSOR_COMPASS_3D,
+		&magn_state->magn_flux_attributes,
+		magn_3d_sensitivity_addresses,
+		ARRAY_SIZE(magn_3d_sensitivity_addresses));
 	if (ret) {
 		dev_err(&pdev->dev, "failed to setup common attributes\n");
 		return ret;
@@ -491,8 +487,8 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 	magn_state->rot_attributes.sensitivity.index = -1;
 
 	ret = magn_3d_parse_report(pdev, hsdev,
-				&channels, &chan_count,
-				HID_USAGE_SENSOR_COMPASS_3D, magn_state);
+				   &channels, &chan_count,
+				   HID_USAGE_SENSOR_COMPASS_3D, magn_state);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to parse report\n");
 		return ret;
@@ -507,7 +503,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 	atomic_set(&magn_state->magn_flux_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-					&magn_state->magn_flux_attributes);
+				       &magn_state->magn_flux_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		return ret;
@@ -523,7 +519,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 	magn_state->callbacks.capture_sample = magn_3d_capture_sample;
 	magn_state->callbacks.pdev = pdev;
 	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D,
-					&magn_state->callbacks);
+					   &magn_state->callbacks);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "callback reg failed\n");
 		goto error_iio_unreg;
diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c b/drivers/iio/orientation/hid-sensor-incl-3d.c
index c7fbff498be7..870c8929491e 100644
--- a/drivers/iio/orientation/hid-sensor-incl-3d.c
+++ b/drivers/iio/orientation/hid-sensor-incl-3d.c
@@ -86,8 +86,7 @@ static const struct iio_chan_spec incl_3d_channels[] = {
 };
 
 /* Adjust channel real bits based on report descriptor */
-static void incl_3d_adjust_channel_bit_mask(struct iio_chan_spec *chan,
-						int size)
+static void incl_3d_adjust_channel_bit_mask(struct iio_chan_spec *chan, int size)
 {
 	chan->scan_type.sign = 's';
 	/* Real storage bits will change based on the report desc. */
@@ -98,9 +97,8 @@ static void incl_3d_adjust_channel_bit_mask(struct iio_chan_spec *chan,
 
 /* Channel read_raw handler */
 static int incl_3d_read_raw(struct iio_dev *indio_dev,
-			      struct iio_chan_spec const *chan,
-			      int *val, int *val2,
-			      long mask)
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
 {
 	struct incl_3d_state *incl_state = iio_priv(indio_dev);
 	int report_id = -1;
@@ -125,7 +123,7 @@ static int incl_3d_read_raw(struct iio_dev *indio_dev,
 				min < 0);
 		else {
 			hid_sensor_power_state(&incl_state->common_attributes,
-						false);
+					       false);
 			return -EINVAL;
 		}
 		hid_sensor_power_state(&incl_state->common_attributes, false);
@@ -158,10 +156,8 @@ static int incl_3d_read_raw(struct iio_dev *indio_dev,
 
 /* Channel write_raw handler */
 static int incl_3d_write_raw(struct iio_dev *indio_dev,
-			       struct iio_chan_spec const *chan,
-			       int val,
-			       int val2,
-			       long mask)
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
 {
 	struct incl_3d_state *incl_state = iio_priv(indio_dev);
 	int ret;
@@ -189,8 +185,7 @@ static const struct iio_info incl_3d_info = {
 
 /* Callback handler to send event after all samples are received and captured */
 static int incl_3d_proc_event(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				void *priv)
+			      u32 usage_id, void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct incl_3d_state *incl_state = iio_priv(indio_dev);
@@ -212,9 +207,9 @@ static int incl_3d_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int incl_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				size_t raw_len, char *raw_data,
-				void *priv)
+				  u32 usage_id,
+				  size_t raw_len, char *raw_data,
+				  void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct incl_3d_state *incl_state = iio_priv(indio_dev);
@@ -350,7 +345,7 @@ static int hid_incl_3d_probe(struct platform_device *pdev)
 	atomic_set(&incl_state->common_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-					&incl_state->common_attributes);
+				       &incl_state->common_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		return ret;
@@ -366,8 +361,8 @@ static int hid_incl_3d_probe(struct platform_device *pdev)
 	incl_state->callbacks.capture_sample = incl_3d_capture_sample;
 	incl_state->callbacks.pdev = pdev;
 	ret = sensor_hub_register_callback(hsdev,
-					HID_USAGE_SENSOR_INCLINOMETER_3D,
-					&incl_state->callbacks);
+					   HID_USAGE_SENSOR_INCLINOMETER_3D,
+					   &incl_state->callbacks);
 	if (ret) {
 		dev_err(&pdev->dev, "callback reg failed\n");
 		goto error_iio_unreg;
diff --git a/drivers/iio/orientation/hid-sensor-rotation.c b/drivers/iio/orientation/hid-sensor-rotation.c
index 20563d8efaf6..2dad0453fc67 100644
--- a/drivers/iio/orientation/hid-sensor-rotation.c
+++ b/drivers/iio/orientation/hid-sensor-rotation.c
@@ -81,9 +81,8 @@ static const struct iio_chan_spec dev_rot_channels[] = {
 
 /* Channel read_raw handler */
 static int dev_rot_read_raw(struct iio_dev *indio_dev,
-				struct iio_chan_spec const *chan,
-				int size, int *vals, int *val_len,
-				long mask)
+			    struct iio_chan_spec const *chan,
+			    int size, int *vals, int *val_len, long mask)
 {
 	struct dev_rot_state *rot_state = iio_priv(indio_dev);
 	int ret_type;
@@ -129,10 +128,8 @@ static int dev_rot_read_raw(struct iio_dev *indio_dev,
 
 /* Channel write_raw handler */
 static int dev_rot_write_raw(struct iio_dev *indio_dev,
-			       struct iio_chan_spec const *chan,
-			       int val,
-			       int val2,
-			       long mask)
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
 {
 	struct dev_rot_state *rot_state = iio_priv(indio_dev);
 	int ret;
@@ -176,8 +173,7 @@ static const struct iio_info dev_rot_info = {
 
 /* Callback handler to send event after all samples are received and captured */
 static int dev_rot_proc_event(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				void *priv)
+			      u32 usage_id, void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct dev_rot_state *rot_state = iio_priv(indio_dev);
@@ -209,9 +205,9 @@ static int dev_rot_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int dev_rot_capture_sample(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				size_t raw_len, char *raw_data,
-				void *priv)
+				  u32 usage_id,
+				  size_t raw_len, char *raw_data,
+				  void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct dev_rot_state *rot_state = iio_priv(indio_dev);
@@ -326,7 +322,7 @@ static int hid_dev_rot_probe(struct platform_device *pdev)
 	atomic_set(&rot_state->common_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-					&rot_state->common_attributes);
+				       &rot_state->common_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		return ret;
@@ -342,7 +338,7 @@ static int hid_dev_rot_probe(struct platform_device *pdev)
 	rot_state->callbacks.capture_sample = dev_rot_capture_sample;
 	rot_state->callbacks.pdev = pdev;
 	ret = sensor_hub_register_callback(hsdev, hsdev->usage,
-					&rot_state->callbacks);
+					   &rot_state->callbacks);
 	if (ret) {
 		dev_err(&pdev->dev, "callback reg failed\n");
 		goto error_iio_unreg;
diff --git a/drivers/iio/position/hid-sensor-custom-intel-hinge.c b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
index 2139ddb670c4..1f4a40716c3f 100644
--- a/drivers/iio/position/hid-sensor-custom-intel-hinge.c
+++ b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
@@ -107,8 +107,8 @@ static void hinge_adjust_channel_realbits(struct iio_chan_spec *channels,
 
 /* Channel read_raw handler */
 static int hinge_read_raw(struct iio_dev *indio_dev,
-			  struct iio_chan_spec const *chan, int *val, int *val2,
-			  long mask)
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
 {
 	struct hinge_state *st = iio_priv(indio_dev);
 	struct hid_sensor_hub_device *hsdev;
@@ -154,8 +154,8 @@ static int hinge_read_raw(struct iio_dev *indio_dev,
 
 /* Channel write_raw handler */
 static int hinge_write_raw(struct iio_dev *indio_dev,
-			   struct iio_chan_spec const *chan, int val, int val2,
-			   long mask)
+			   struct iio_chan_spec const *chan,
+			   int val, int val2, long mask)
 {
 	struct hinge_state *st = iio_priv(indio_dev);
 
@@ -209,8 +209,9 @@ static int hinge_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int hinge_capture_sample(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id, size_t raw_len,
-				char *raw_data, void *priv)
+				u32 usage_id,
+				size_t raw_len, char *raw_data,
+				void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct hinge_state *st = iio_priv(indio_dev);
diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c
index 3e47a10d72a8..de20740f6cca 100644
--- a/drivers/iio/pressure/hid-sensor-press.c
+++ b/drivers/iio/pressure/hid-sensor-press.c
@@ -56,9 +56,8 @@ static const struct iio_chan_spec press_channels[] = {
 
 /* Channel read_raw handler */
 static int press_read_raw(struct iio_dev *indio_dev,
-			      struct iio_chan_spec const *chan,
-			      int *val, int *val2,
-			      long mask)
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
 {
 	struct press_state *press_state = iio_priv(indio_dev);
 	int report_id = -1;
@@ -82,7 +81,7 @@ static int press_read_raw(struct iio_dev *indio_dev,
 		}
 		if (report_id >= 0) {
 			hid_sensor_power_state(&press_state->common_attributes,
-						true);
+					       true);
 			*val = sensor_hub_input_attr_get_raw_value(
 				press_state->common_attributes.hsdev,
 				HID_USAGE_SENSOR_PRESSURE, address,
@@ -90,7 +89,7 @@ static int press_read_raw(struct iio_dev *indio_dev,
 				SENSOR_HUB_SYNC,
 				min < 0);
 			hid_sensor_power_state(&press_state->common_attributes,
-						false);
+					       false);
 		} else {
 			*val = 0;
 			return -EINVAL;
@@ -124,10 +123,8 @@ static int press_read_raw(struct iio_dev *indio_dev,
 
 /* Channel write_raw handler */
 static int press_write_raw(struct iio_dev *indio_dev,
-			       struct iio_chan_spec const *chan,
-			       int val,
-			       int val2,
-			       long mask)
+			   struct iio_chan_spec const *chan,
+			   int val, int val2, long mask)
 {
 	struct press_state *press_state = iio_priv(indio_dev);
 	int ret = 0;
@@ -155,8 +152,7 @@ static const struct iio_info press_info = {
 
 /* Callback handler to send event after all samples are received and captured */
 static int press_proc_event(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id,
-				void *priv)
+			    u32 usage_id, void *priv)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(priv);
 	struct press_state *press_state = iio_priv(indio_dev);
@@ -202,10 +198,10 @@ static int press_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 /* Parse report which is specific to an usage id*/
 static int press_parse_report(struct platform_device *pdev,
-				struct hid_sensor_hub_device *hsdev,
-				struct iio_chan_spec *channels,
-				u32 usage_id,
-				struct press_state *st)
+			      struct hid_sensor_hub_device *hsdev,
+			      struct iio_chan_spec *channels,
+			      u32 usage_id,
+			      struct press_state *st)
 {
 	int ret;
 
@@ -222,7 +218,7 @@ static int press_parse_report(struct platform_device *pdev,
 	};
 
 	dev_dbg(&pdev->dev, "press %x:%x\n", st->press_attr.index,
-			st->press_attr.report_id);
+		st->press_attr.report_id);
 
 	st->scale_precision = hid_sensor_format_scale(
 				HID_USAGE_SENSOR_PRESSURE,
@@ -241,8 +237,7 @@ static int hid_press_probe(struct platform_device *pdev)
 	struct iio_dev *indio_dev;
 	struct press_state *press_state;
 
-	indio_dev = devm_iio_device_alloc(&pdev->dev,
-				sizeof(struct press_state));
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct press_state));
 	if (!indio_dev)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, indio_dev);
@@ -285,7 +280,7 @@ static int hid_press_probe(struct platform_device *pdev)
 	atomic_set(&press_state->common_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-				&press_state->common_attributes);
+				       &press_state->common_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		return ret;
@@ -301,7 +296,7 @@ static int hid_press_probe(struct platform_device *pdev)
 	press_state->callbacks.capture_sample = press_capture_sample;
 	press_state->callbacks.pdev = pdev;
 	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_PRESSURE,
-					&press_state->callbacks);
+					   &press_state->callbacks);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "callback reg failed\n");
 		goto error_iio_unreg;
diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c
index a8d3a15f9c53..18da85e6c60e 100644
--- a/drivers/iio/temperature/hid-sensor-temperature.c
+++ b/drivers/iio/temperature/hid-sensor-temperature.c
@@ -45,7 +45,7 @@ static const struct iio_chan_spec temperature_channels[] = {
 
 /* Adjust channel real bits based on report descriptor */
 static void temperature_adjust_channel_bit_mask(struct iio_chan_spec *channels,
-					int channel, int size)
+						int channel, int size)
 {
 	channels[channel].scan_type.sign = 's';
 	/* Real storage bits will change based on the report desc. */
@@ -101,8 +101,8 @@ static int temperature_read_raw(struct iio_dev *indio_dev,
 }
 
 static int temperature_write_raw(struct iio_dev *indio_dev,
-				struct iio_chan_spec const *chan,
-				int val, int val2, long mask)
+				 struct iio_chan_spec const *chan,
+				 int val, int val2, long mask)
 {
 	struct temperature_state *temp_st = iio_priv(indio_dev);
 
@@ -125,7 +125,7 @@ static const struct iio_info temperature_info = {
 
 /* Callback handler to send event after all samples are received and captured */
 static int temperature_proc_event(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id, void *pdev)
+				  u32 usage_id, void *pdev)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct temperature_state *temp_st = iio_priv(indio_dev);
@@ -140,8 +140,9 @@ static int temperature_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int temperature_capture_sample(struct hid_sensor_hub_device *hsdev,
-				u32 usage_id, size_t raw_len,
-				char *raw_data, void *pdev)
+				      u32 usage_id,
+				      size_t raw_len, char *raw_data,
+				      void *pdev)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct temperature_state *temp_st = iio_priv(indio_dev);
@@ -157,10 +158,10 @@ static int temperature_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 /* Parse report which is specific to an usage id*/
 static int temperature_parse_report(struct platform_device *pdev,
-				struct hid_sensor_hub_device *hsdev,
-				struct iio_chan_spec *channels,
-				u32 usage_id,
-				struct temperature_state *st)
+				    struct hid_sensor_hub_device *hsdev,
+				    struct iio_chan_spec *channels,
+				    u32 usage_id,
+				    struct temperature_state *st)
 {
 	int ret;
 
@@ -171,8 +172,7 @@ static int temperature_parse_report(struct platform_device *pdev,
 	if (ret < 0)
 		return ret;
 
-	temperature_adjust_channel_bit_mask(channels, 0,
-					st->temperature_attr.size);
+	temperature_adjust_channel_bit_mask(channels, 0, st->temperature_attr.size);
 
 	st->scale_precision = hid_sensor_format_scale(
 				HID_USAGE_SENSOR_TEMPERATURE,
@@ -206,10 +206,10 @@ static int hid_temperature_probe(struct platform_device *pdev)
 	temp_st->common_attributes.pdev = pdev;
 
 	ret = hid_sensor_parse_common_attributes(hsdev,
-					HID_USAGE_SENSOR_TEMPERATURE,
-					&temp_st->common_attributes,
-					temperature_sensitivity_addresses,
-					ARRAY_SIZE(temperature_sensitivity_addresses));
+			HID_USAGE_SENSOR_TEMPERATURE,
+			&temp_st->common_attributes,
+			temperature_sensitivity_addresses,
+			ARRAY_SIZE(temperature_sensitivity_addresses));
 	if (ret)
 		return ret;
 
@@ -219,7 +219,7 @@ static int hid_temperature_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	ret = temperature_parse_report(pdev, hsdev, temp_chans,
-				HID_USAGE_SENSOR_TEMPERATURE, temp_st);
+				       HID_USAGE_SENSOR_TEMPERATURE, temp_st);
 	if (ret)
 		return ret;
 
@@ -232,7 +232,7 @@ static int hid_temperature_probe(struct platform_device *pdev)
 	atomic_set(&temp_st->common_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-				&temp_st->common_attributes);
+				       &temp_st->common_attributes);
 	if (ret)
 		return ret;
 
@@ -240,7 +240,7 @@ static int hid_temperature_probe(struct platform_device *pdev)
 
 	temperature_callbacks.pdev = pdev;
 	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE,
-					&temperature_callbacks);
+					   &temperature_callbacks);
 	if (ret)
 		goto error_remove_trigger;
 

-- 
2.34.1

Re: [PATCH v2 2/6] iio: hid-sensors: align function parenthesis for readability

[Jonathan Cameron]

On Thu, 02 Jul 2026 21:47:59 +0530
Sanjay Chitroda via B4 Relay <devnull+sanjayembeddedse.gmail.com@kernel.org> wrote:

> From: Sanjay Chitroda <sanjayembeddedse@gmail.com>
> 
> Adjust alignment of parentheses across HID sensor IIO drivers to
> improve readability and maintain consistency with kernel coding style.
> 
> While updating the formatting, group related arguments consistently in
> multi-line function signatures where appropriate.
> 
> No functional change intended.
> 
> Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Hi Sanjay,

Whilst I appreciate this code isn't quite in line with standards
and usually like that stuff to be fixed up, in this particular case
this is a massive amount of churn.  That churn will make backporting
fixes etc messier, so I'd like input on whether others consider this
one worthwhile.  Jiri, Srinivas, Andy etc. What do you think?

A few comments on inconsistencies inline.

Jonathan

> ---
>  drivers/iio/accel/hid-sensor-accel-3d.c            | 46 ++++++-----
>  .../iio/common/hid-sensors/hid-sensor-attributes.c | 88 +++++++++++-----------
>  .../iio/common/hid-sensors/hid-sensor-trigger.c    |  2 +-
>  .../iio/common/hid-sensors/hid-sensor-trigger.h    |  2 +-
>  drivers/iio/gyro/hid-sensor-gyro-3d.c              | 54 ++++++-------
>  drivers/iio/humidity/hid-sensor-humidity.c         | 47 ++++++------
>  drivers/iio/light/hid-sensor-als.c                 | 32 ++++----
>  drivers/iio/light/hid-sensor-prox.c                | 29 +++----
>  drivers/iio/magnetometer/hid-sensor-magn-3d.c      | 74 +++++++++---------
>  drivers/iio/orientation/hid-sensor-incl-3d.c       | 31 ++++----
>  drivers/iio/orientation/hid-sensor-rotation.c      | 24 +++---
>  .../iio/position/hid-sensor-custom-intel-hinge.c   | 13 ++--
>  drivers/iio/pressure/hid-sensor-press.c            | 35 ++++-----
>  drivers/iio/temperature/hid-sensor-temperature.c   | 38 +++++-----
>  14 files changed, 241 insertions(+), 274 deletions(-)


> diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> index 2f0a1ea42f48..13fa55e966f4 100644
> --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
...

>  }
>  
>  int hid_sensor_format_scale(u32 usage_id,
> -			struct hid_sensor_hub_attribute_info *attr_info,
> -			int *val0, int *val1)
> +			    struct hid_sensor_hub_attribute_info *attr_info,
> +			    int *val0, int *val1)
>  {
>  	int i;
>  	int exp;
> @@ -414,9 +413,8 @@ int hid_sensor_format_scale(u32 usage_id,
>  
>  	for (i = 0; i < ARRAY_SIZE(unit_conversion); ++i) {
>  		if (unit_conversion[i].usage_id == usage_id &&
> -			unit_conversion[i].unit == attr_info->units) {
> -			exp  = hid_sensor_convert_exponent(
> -						attr_info->unit_expo);
> +		    unit_conversion[i].unit == attr_info->units) {
> +			exp  = hid_sensor_convert_exponent(attr_info->unit_expo);
>  			adjust_exponent_nano(val0, val1,
>  					unit_conversion[i].scale_val0,
>  					unit_conversion[i].scale_val1, exp);
Why did this one get left alone?

> @@ -511,14 +510,14 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
>  	hid_sensor_get_reporting_interval(hsdev, usage_id, st);
>  
>  	sensor_hub_input_get_attribute_info(hsdev,
> -					HID_FEATURE_REPORT, usage_id,
> -					HID_USAGE_SENSOR_PROP_REPORT_STATE,
> -					&st->report_state);
> +			HID_FEATURE_REPORT, usage_id,
> +			HID_USAGE_SENSOR_PROP_REPORT_STATE,
> +			&st->report_state);
>  
>  	sensor_hub_input_get_attribute_info(hsdev,
> -					HID_FEATURE_REPORT, usage_id,
> -					HID_USAGE_SENSOR_PROY_POWER_STATE,
> -					&st->power_state);
> +			HID_FEATURE_REPORT, usage_id,
> +			HID_USAGE_SENSOR_PROY_POWER_STATE,
> +			&st->power_state);

See below.

> @@ -526,7 +525,7 @@ int hid_sensor_parse_common_attributes(struct hid_sensor_hub_device *hsdev,
>  	sensor_hub_input_get_attribute_info(hsdev,
>  			HID_FEATURE_REPORT, usage_id,
>  			HID_USAGE_SENSOR_PROP_SENSITIVITY_ABS,
> -			 &st->sensitivity);
> +			&st->sensitivity);

Some cases like this one are locally inconsistent so we'd want to fix those
even if leaving the majority alone.

> diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
> index bbca2111e79b..0dba475845d7 100644
> --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
> +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c

> @@ -240,11 +235,12 @@ static int gyro_3d_parse_report(struct platform_device *pdev,
>  	int ret;
>  
>  	for (unsigned int ch = CHANNEL_SCAN_INDEX_X; ch <= CHANNEL_SCAN_INDEX_Z; ch++) {
> -		ret = sensor_hub_input_get_attribute_info(hsdev,
> -				HID_INPUT_REPORT,
> -				usage_id,
> -				HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS + ch,
> -				&st->gyro[ch]);
> +		ret = sensor_hub_input_get_attribute_info(
> +			hsdev,
> +			HID_INPUT_REPORT,
> +			usage_id,
> +			HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS + ch,
> +			&st->gyro[ch]);

See below.

> diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> index 23884825eb00..ad10fa20fae0 100644
> --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
...
> @@ -353,11 +348,12 @@ static int magn_3d_parse_report(struct platform_device *pdev,
>  		u32 address = magn_3d_addresses[i];
>  
>  		/* Check if usage attribute exists in the sensor hub device */
> -		status = sensor_hub_input_get_attribute_info(hsdev,
> -			HID_INPUT_REPORT,
> -			usage_id,
> -			address,
> -			&(st->magn[i]));
> +		status = sensor_hub_input_get_attribute_info(
> +				hsdev,
> +				HID_INPUT_REPORT,
> +				usage_id,
> +				address,
> +				&(st->magn[i]));

See below.

> @@ -442,7 +436,8 @@ static int magn_3d_parse_report(struct platform_device *pdev,
>  			&st->rot_attr.scale_post_decml);
>  
>  	if (st->rot_attributes.sensitivity.index < 0) {
> -		sensor_hub_input_get_attribute_info(hsdev,
> +		sensor_hub_input_get_attribute_info(
> +			hsdev,
>  			HID_FEATURE_REPORT, usage_id,
>  			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
>  			HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
See below.
> @@ -477,11 +472,12 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
>  	magn_state->magn_flux_attributes.hsdev = hsdev;
>  	magn_state->magn_flux_attributes.pdev = pdev;
>  
> -	ret = hid_sensor_parse_common_attributes(hsdev,
> -				HID_USAGE_SENSOR_COMPASS_3D,
> -				&magn_state->magn_flux_attributes,
> -				magn_3d_sensitivity_addresses,
> -				ARRAY_SIZE(magn_3d_sensitivity_addresses));
> +	ret = hid_sensor_parse_common_attributes(
> +		hsdev,
> +		HID_USAGE_SENSOR_COMPASS_3D,
> +		&magn_state->magn_flux_attributes,
> +		magn_3d_sensitivity_addresses,
> +		ARRAY_SIZE(magn_3d_sensitivity_addresses));

See below - the movement of hsdev and the single tab vs two tab
difference was why I pointed out that this patch is inconsistent.
As noted there, I'd be tempted to leave these ones alone, even
if we are cleaning up most of the other indentation.

> diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c
> index a8d3a15f9c53..18da85e6c60e 100644
> --- a/drivers/iio/temperature/hid-sensor-temperature.c
> +++ b/drivers/iio/temperature/hid-sensor-temperature.c

...

> @@ -206,10 +206,10 @@ static int hid_temperature_probe(struct platform_device *pdev)
>  	temp_st->common_attributes.pdev = pdev;
>  
>  	ret = hid_sensor_parse_common_attributes(hsdev,
> -					HID_USAGE_SENSOR_TEMPERATURE,
> -					&temp_st->common_attributes,
> -					temperature_sensitivity_addresses,
> -					ARRAY_SIZE(temperature_sensitivity_addresses));
> +			HID_USAGE_SENSOR_TEMPERATURE,
> +			&temp_st->common_attributes,
> +			temperature_sensitivity_addresses,
> +			ARRAY_SIZE(temperature_sensitivity_addresses));

There aren't hard rules on how to format these cases where a break is needed.
That is kind of reflected in inconsistency in this set.  I'd be tempted
to leave these ones alone.

Jonathan

> 

Re: [PATCH v2 2/6] iio: hid-sensors: align function parenthesis for readability

[Andy Shevchenko]

On Thu, Jul 02, 2026 at 06:20:15PM +0100, Jonathan Cameron wrote:
> On Thu, 02 Jul 2026 21:47:59 +0530
> Sanjay Chitroda via B4 Relay <devnull+sanjayembeddedse.gmail.com@kernel.org> wrote:
> 
> > Adjust alignment of parentheses across HID sensor IIO drivers to
> > improve readability and maintain consistency with kernel coding style.
> > 
> > While updating the formatting, group related arguments consistently in
> > multi-line function signatures where appropriate.
> > 
> > No functional change intended.
> 
> Whilst I appreciate this code isn't quite in line with standards
> and usually like that stuff to be fixed up, in this particular case
> this is a massive amount of churn.  That churn will make backporting
> fixes etc messier, so I'd like input on whether others consider this
> one worthwhile.  Jiri, Srinivas, Andy etc. What do you think?

I am fine as long as Srinivas is. I understand pros and cons of this, but from
time to time we have patches à la this one that messes up with backporting but
were accepted as a good part of some bigger series.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v2 2/6] iio: hid-sensors: align function parenthesis for readability

[srinivas pandruvada]

On Fri, 2026-07-03 at 15:52 +0300, Andy Shevchenko wrote:
> On Thu, Jul 02, 2026 at 06:20:15PM +0100, Jonathan Cameron wrote:
> > On Thu, 02 Jul 2026 21:47:59 +0530
> > Sanjay Chitroda via B4 Relay
> > <devnull+sanjayembeddedse.gmail.com@kernel.org> wrote:
> > 
> > > Adjust alignment of parentheses across HID sensor IIO drivers to
> > > improve readability and maintain consistency with kernel coding
> > > style.
> > > 
> > > While updating the formatting, group related arguments
> > > consistently in
> > > multi-line function signatures where appropriate.
> > > 
> > > No functional change intended.
> > 
> > Whilst I appreciate this code isn't quite in line with standards
> > and usually like that stuff to be fixed up, in this particular case
> > this is a massive amount of churn.  That churn will make
> > backporting
> > fixes etc messier, so I'd like input on whether others consider
> > this
> > one worthwhile.  Jiri, Srinivas, Andy etc. What do you think?
> 
> I am fine as long as Srinivas is. I understand pros and cons of this,
> but from
> time to time we have patches à la this one that messes up with
> backporting but
> were accepted as a good part of some bigger series.

I am fine. I guess we will deal with backporting issues as they appear.

Thanks,
Srinivas 

[PATCH v2 3/6] iio: hid-sensors: Use implicit NULL pointer checks

[Sanjay Chitroda via B4 Relay]

From: Sanjay Chitroda <sanjayembeddedse@gmail.com>

Replace explicit NULL pointer comparisons with implicit checks across
HID sensor IIO drivers to follow the preferred kernel coding style.

Convert 'if (indio_dev == NULL)' -> 'if (!indio_dev)'.

No functional change.

Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
---
 drivers/iio/accel/hid-sensor-accel-3d.c       | 2 +-
 drivers/iio/magnetometer/hid-sensor-magn-3d.c | 2 +-
 drivers/iio/orientation/hid-sensor-incl-3d.c  | 2 +-
 drivers/iio/orientation/hid-sensor-rotation.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
index 9197f3424c0c..225f8dd65ab1 100644
--- a/drivers/iio/accel/hid-sensor-accel-3d.c
+++ b/drivers/iio/accel/hid-sensor-accel-3d.c
@@ -325,7 +325,7 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev,
 					  sizeof(struct accel_3d_state));
-	if (indio_dev == NULL)
+	if (!indio_dev)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, indio_dev);
diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
index ad10fa20fae0..738bad65d74d 100644
--- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -463,7 +463,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev,
 					  sizeof(struct magn_3d_state));
-	if (indio_dev == NULL)
+	if (!indio_dev)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, indio_dev);
diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c b/drivers/iio/orientation/hid-sensor-incl-3d.c
index 870c8929491e..c8efb0dab8b6 100644
--- a/drivers/iio/orientation/hid-sensor-incl-3d.c
+++ b/drivers/iio/orientation/hid-sensor-incl-3d.c
@@ -302,7 +302,7 @@ static int hid_incl_3d_probe(struct platform_device *pdev)
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev,
 					  sizeof(struct incl_3d_state));
-	if (indio_dev == NULL)
+	if (!indio_dev)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, indio_dev);
diff --git a/drivers/iio/orientation/hid-sensor-rotation.c b/drivers/iio/orientation/hid-sensor-rotation.c
index 2dad0453fc67..6db253c1635d 100644
--- a/drivers/iio/orientation/hid-sensor-rotation.c
+++ b/drivers/iio/orientation/hid-sensor-rotation.c
@@ -274,7 +274,7 @@ static int hid_dev_rot_probe(struct platform_device *pdev)
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev,
 					  sizeof(struct dev_rot_state));
-	if (indio_dev == NULL)
+	if (!indio_dev)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, indio_dev);

-- 
2.34.1

Re: [PATCH v2 3/6] iio: hid-sensors: Use implicit NULL pointer checks

[Jonathan Cameron]

On Thu, 02 Jul 2026 21:48:00 +0530
Sanjay Chitroda via B4 Relay <devnull+sanjayembeddedse.gmail.com@kernel.org> wrote:

> From: Sanjay Chitroda <sanjayembeddedse@gmail.com>
> 
> Replace explicit NULL pointer comparisons with implicit checks across
> HID sensor IIO drivers to follow the preferred kernel coding style.
Is there anything in the kernel wide style guides about this?

I do prefer this style in IIO but perhaps we should document it
as local IIO style rather than implying general guidance (unless
there is some!)

> 
> Convert 'if (indio_dev == NULL)' -> 'if (!indio_dev)'.
> 
> No functional change.
> 
> Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
> Reviewed-by: Maxwell Doose <m32285159@gmail.com>
> ---
>  drivers/iio/accel/hid-sensor-accel-3d.c       | 2 +-
>  drivers/iio/magnetometer/hid-sensor-magn-3d.c | 2 +-
>  drivers/iio/orientation/hid-sensor-incl-3d.c  | 2 +-
>  drivers/iio/orientation/hid-sensor-rotation.c | 2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c
> index 9197f3424c0c..225f8dd65ab1 100644
> --- a/drivers/iio/accel/hid-sensor-accel-3d.c
> +++ b/drivers/iio/accel/hid-sensor-accel-3d.c
> @@ -325,7 +325,7 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
>  
>  	indio_dev = devm_iio_device_alloc(&pdev->dev,
>  					  sizeof(struct accel_3d_state));
> -	if (indio_dev == NULL)
> +	if (!indio_dev)
>  		return -ENOMEM;
>  
>  	platform_set_drvdata(pdev, indio_dev);
> diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> index ad10fa20fae0..738bad65d74d 100644
> --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> @@ -463,7 +463,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
>  
>  	indio_dev = devm_iio_device_alloc(&pdev->dev,
>  					  sizeof(struct magn_3d_state));
> -	if (indio_dev == NULL)
> +	if (!indio_dev)
>  		return -ENOMEM;
>  
>  	platform_set_drvdata(pdev, indio_dev);
> diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c b/drivers/iio/orientation/hid-sensor-incl-3d.c
> index 870c8929491e..c8efb0dab8b6 100644
> --- a/drivers/iio/orientation/hid-sensor-incl-3d.c
> +++ b/drivers/iio/orientation/hid-sensor-incl-3d.c
> @@ -302,7 +302,7 @@ static int hid_incl_3d_probe(struct platform_device *pdev)
>  
>  	indio_dev = devm_iio_device_alloc(&pdev->dev,
>  					  sizeof(struct incl_3d_state));
> -	if (indio_dev == NULL)
> +	if (!indio_dev)
>  		return -ENOMEM;
>  
>  	platform_set_drvdata(pdev, indio_dev);
> diff --git a/drivers/iio/orientation/hid-sensor-rotation.c b/drivers/iio/orientation/hid-sensor-rotation.c
> index 2dad0453fc67..6db253c1635d 100644
> --- a/drivers/iio/orientation/hid-sensor-rotation.c
> +++ b/drivers/iio/orientation/hid-sensor-rotation.c
> @@ -274,7 +274,7 @@ static int hid_dev_rot_probe(struct platform_device *pdev)
>  
>  	indio_dev = devm_iio_device_alloc(&pdev->dev,
>  					  sizeof(struct dev_rot_state));
> -	if (indio_dev == NULL)
> +	if (!indio_dev)
>  		return -ENOMEM;
>  
>  	platform_set_drvdata(pdev, indio_dev);
> 

[PATCH v2 4/6] iio: humidity: hid-sensor-humidity: use common device for devres

[Sanjay Chitroda via B4 Relay]

From: Sanjay Chitroda <sanjayembeddedse@gmail.com>

kmemdup() is used for memory that is logically tied to the HID
platform device, even though the driver binds into the IIO framework.

Using &indio_dev->dev for devres allocations works functionally, but it
results in two separate devres ownership trees—one for the HID
platform device (pdev) and another for the IIO device (indio_dev).

The devres framework is intended to have a single, well-defined parent
device. Since the memory originates from HID sensor probing and is not
IIO-specific, &pdev->dev is the correct and logical owner.

Switch to using the platform device for devm_kmemdup() so that all
resources are released deterministically and consistently.

Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Tested-by: Zhang Lixu <lixu.zhang@intel.com>
---
 drivers/iio/humidity/hid-sensor-humidity.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c
index 8dd8bc0b3ba1..b7130eac0394 100644
--- a/drivers/iio/humidity/hid-sensor-humidity.c
+++ b/drivers/iio/humidity/hid-sensor-humidity.c
@@ -216,7 +216,7 @@ static int hid_humidity_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	humid_chans = devm_kmemdup(&indio_dev->dev, humidity_channels,
+	humid_chans = devm_kmemdup(&pdev->dev, humidity_channels,
 				   sizeof(humidity_channels), GFP_KERNEL);
 	if (!humid_chans)
 		return -ENOMEM;

-- 
2.34.1

Re: [PATCH v2 4/6] iio: humidity: hid-sensor-humidity: use common device for devres

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Switching devres allocation for `humid_chans` from `&indio_dev->dev` to `&pdev->dev` breaks the IIO object lifetime model, introducing a Use-After-Free (UAF) vulnerability when the IIO device outlives the platform device.
--

commit 2c7cc72d2b1a34bface667809d68f3aaec43f667
Author: Sanjay Chitroda <sanjayembeddedse@gmail.com>

iio: humidity: hid-sensor-humidity: use common device for devres

This commit changes the devres allocation for the humidity channels to use
the platform device instead of the IIO device. The goal is to consolidate
devres ownership under a single parent device.

> diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c
> index 8dd8bc0b3ba18..b7130eac03945 100644
> --- a/drivers/iio/humidity/hid-sensor-humidity.c
> +++ b/drivers/iio/humidity/hid-sensor-humidity.c
> @@ -216,7 +216,7 @@ static int hid_humidity_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	humid_chans = devm_kmemdup(&indio_dev->dev, humidity_channels,
> +	humid_chans = devm_kmemdup(&pdev->dev, humidity_channels,

[Severity: High]
Does this change introduce a regression if the IIO device outlives the
platform device?

If an in-kernel consumer obtains a channel reference via iio_channel_get(),
it increments the reference count of the IIO device (indio_dev->dev). This
allows indio_dev to outlive the platform device.

When the platform device is unbound, the devres framework will free
humid_chans because its lifetime is now tied to &pdev->dev. However, the
consumer will still hold an iio_channel structure where chan->channel points
into the now-freed humid_chans array.

If the consumer later calls APIs like iio_read_channel_ext_info(), could this
dereference chan->channel->ext_info and access freed memory?

>  				   sizeof(humidity_channels), GFP_KERNEL);
>  	if (!humid_chans)
>  		return -ENOMEM;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260702-15-jun-hid-iio-alignment-v2-0-b87f01f5efbc@gmail.com?part=4

Re: [PATCH v2 4/6] iio: humidity: hid-sensor-humidity: use common device for devres

[Jonathan Cameron]

On Thu, 02 Jul 2026 21:48:01 +0530
Sanjay Chitroda via B4 Relay <devnull+sanjayembeddedse.gmail.com@kernel.org> wrote:

> From: Sanjay Chitroda <sanjayembeddedse@gmail.com>
> 
> kmemdup() is used for memory that is logically tied to the HID
> platform device, even though the driver binds into the IIO framework.
> 
> Using &indio_dev->dev for devres allocations works functionally, but it
> results in two separate devres ownership trees—one for the HID
> platform device (pdev) and another for the IIO device (indio_dev).
> 
> The devres framework is intended to have a single, well-defined parent
> device. Since the memory originates from HID sensor probing and is not
> IIO-specific, &pdev->dev is the correct and logical owner.
> 
> Switch to using the platform device for devm_kmemdup() so that all
> resources are released deterministically and consistently.
> 
> Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
> Tested-by: Zhang Lixu <lixu.zhang@intel.com>

This one is more significant that the formatting change so I'll pick
it up now. Note that it does change the context for that formatting
change patch which touches the line below this change.

So applied by hand to the testing branch of iio.git.

Thanks,

Jonathan

> ---
>  drivers/iio/humidity/hid-sensor-humidity.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c
> index 8dd8bc0b3ba1..b7130eac0394 100644
> --- a/drivers/iio/humidity/hid-sensor-humidity.c
> +++ b/drivers/iio/humidity/hid-sensor-humidity.c
> @@ -216,7 +216,7 @@ static int hid_humidity_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	humid_chans = devm_kmemdup(&indio_dev->dev, humidity_channels,
> +	humid_chans = devm_kmemdup(&pdev->dev, humidity_channels,
>  				   sizeof(humidity_channels), GFP_KERNEL);
>  	if (!humid_chans)
>  		return -ENOMEM;
> 

[PATCH v2 5/6] iio: position: hid-sensor-custom-intel-hinge: use common device for devres

[Sanjay Chitroda via B4 Relay]

From: Sanjay Chitroda <sanjayembeddedse@gmail.com>

kmemdup() is used for memory that is logically tied to the HID
platform device, even though the driver binds into the IIO framework.

Using &indio_dev->dev for devres allocations works functionally, but it
results in two separate devres ownership trees—one for the HID
platform device (pdev) and another for the IIO device (indio_dev).

The devres framework is intended to have a single, well-defined parent
device. Since the memory originates from HID sensor probing and is not
IIO-specific, &pdev->dev is the correct and logical owner.

Switch to using the platform device for devm_kmemdup() so that all
resources are released deterministically and consistently.

Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
---
 drivers/iio/position/hid-sensor-custom-intel-hinge.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/position/hid-sensor-custom-intel-hinge.c b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
index 1f4a40716c3f..eb6c59f81c3f 100644
--- a/drivers/iio/position/hid-sensor-custom-intel-hinge.c
+++ b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
@@ -293,7 +293,7 @@ static int hid_hinge_probe(struct platform_device *pdev)
 	}
 
 	indio_dev->num_channels = ARRAY_SIZE(hinge_channels);
-	indio_dev->channels = devm_kmemdup(&indio_dev->dev, hinge_channels,
+	indio_dev->channels = devm_kmemdup(&pdev->dev, hinge_channels,
 					   sizeof(hinge_channels), GFP_KERNEL);
 	if (!indio_dev->channels)
 		return -ENOMEM;

-- 
2.34.1

Re: [PATCH v2 5/6] iio: position: hid-sensor-custom-intel-hinge: use common device for devres

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:

New issues:
- [High] Lifetime mismatch creating a dangling pointer and latent Use-After-Free for indio_dev->channels

Pre-existing issues:
- [High] Preexisting Use-After-Free due to lack of synchronization in sensor_hub_remove_callback()
--

commit fb5b93327e543a3377eb1d115b291e219ae98165
Author: Sanjay Chitroda <sanjayembeddedse@gmail.com>

iio: position: hid-sensor-custom-intel-hinge: use common device for devres

This commit changes the devres allocation for the IIO channels array from
using the IIO device to using the platform device. The goal is to bind the
memory lifecycle to the HID platform device instead of the IIO device.

> diff --git a/drivers/iio/position/hid-sensor-custom-intel-hinge.c b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> index 1f4a40716c3f7..eb6c59f81c3f3 100644
> --- a/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> +++ b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> @@ -293,7 +293,7 @@ static int hid_hinge_probe(struct platform_device *pdev)
>  	}
>  
>  	indio_dev->num_channels = ARRAY_SIZE(hinge_channels);
> -	indio_dev->channels = devm_kmemdup(&indio_dev->dev, hinge_channels,
> +	indio_dev->channels = devm_kmemdup(&pdev->dev, hinge_channels,
>  					   sizeof(hinge_channels), GFP_KERNEL);

[Severity: High]
Does binding the channels array to the platform device introduce a lifetime
issue for the IIO device?

In the IIO framework, indio_dev is reference-counted and can outlive the
platform device if an in-kernel consumer holds a reference via
iio_channel_get().

If the platform device unbinds, devres will automatically free the channels
array. However, because indio_dev remains alive, a subsequent access to
channel metadata by the consumer (such as calling
iio_get_channel_ext_info_count()) would dereference the freed channels
array.

>  	if (!indio_dev->channels)
>  		return -ENOMEM;

[Severity: High]
This isn't a bug introduced by this patch, but is there a missing
synchronization step when removing callbacks during the error paths here
and in the driver's unbind function?

The HID sensor hub processes events in sensor_hub_raw_event(), which looks
up a callback and executes it (like hinge_capture_sample()) while holding
pdata->lock.

When sensor_hub_remove_callback() is called, it removes the callback from
the list and returns without acquiring pdata->lock or waiting for the
ongoing event processing to finish:

drivers/hid/hid-sensor-hub.c:sensor_hub_remove_callback() {
    spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
    list_for_each_entry(callback, &pdata->dyn_callback_list, list)
        if (callback->usage_id == usage_id &&
                        callback->hsdev == hsdev) {
            list_del(&callback->list);
            kfree(callback);
            break;
        }
    spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
}

If the driver is unbound concurrently via sysfs while background sensor
events are being received, devres will free the driver's private state when
the unbind completes. The concurrent sensor_hub_raw_event() could then write
raw sensor data directly into the freed state structure.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260702-15-jun-hid-iio-alignment-v2-0-b87f01f5efbc@gmail.com?part=5

Re: [PATCH v2 5/6] iio: position: hid-sensor-custom-intel-hinge: use common device for devres

[Jonathan Cameron]

On Thu, 02 Jul 2026 21:48:02 +0530
Sanjay Chitroda via B4 Relay <devnull+sanjayembeddedse.gmail.com@kernel.org> wrote:

> From: Sanjay Chitroda <sanjayembeddedse@gmail.com>
> 
> kmemdup() is used for memory that is logically tied to the HID
> platform device, even though the driver binds into the IIO framework.
> 
> Using &indio_dev->dev for devres allocations works functionally, but it
> results in two separate devres ownership trees—one for the HID
> platform device (pdev) and another for the IIO device (indio_dev).
> 
> The devres framework is intended to have a single, well-defined parent
> device. Since the memory originates from HID sensor probing and is not
> IIO-specific, &pdev->dev is the correct and logical owner.
> 
> Switch to using the platform device for devm_kmemdup() so that all
> resources are released deterministically and consistently.
> 
> Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Applied this one.

> ---
>  drivers/iio/position/hid-sensor-custom-intel-hinge.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/position/hid-sensor-custom-intel-hinge.c b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> index 1f4a40716c3f..eb6c59f81c3f 100644
> --- a/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> +++ b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> @@ -293,7 +293,7 @@ static int hid_hinge_probe(struct platform_device *pdev)
>  	}
>  
>  	indio_dev->num_channels = ARRAY_SIZE(hinge_channels);
> -	indio_dev->channels = devm_kmemdup(&indio_dev->dev, hinge_channels,
> +	indio_dev->channels = devm_kmemdup(&pdev->dev, hinge_channels,
>  					   sizeof(hinge_channels), GFP_KERNEL);
>  	if (!indio_dev->channels)
>  		return -ENOMEM;
> 

[PATCH v2 6/6] iio: temperature: hid-sensor-temperature: use common device for devres

[Sanjay Chitroda via B4 Relay]

From: Sanjay Chitroda <sanjayembeddedse@gmail.com>

kmemdup() is used for memory that is logically tied to the HID
platform device, even though the driver binds into the IIO framework.

Using &indio_dev->dev for devres allocations works functionally, but it
results in two separate devres ownership trees—one for the HID
platform device (pdev) and another for the IIO device (indio_dev).

The devres framework is intended to have a single, well-defined parent
device. Since the memory originates from HID sensor probing and is not
IIO-specific, &pdev->dev is the correct and logical owner.

Switch to using the platform device for devm_kmemdup() so that all
resources are released deterministically and consistently.

Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
---
 drivers/iio/temperature/hid-sensor-temperature.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c
index 18da85e6c60e..6dfb606a53af 100644
--- a/drivers/iio/temperature/hid-sensor-temperature.c
+++ b/drivers/iio/temperature/hid-sensor-temperature.c
@@ -213,8 +213,8 @@ static int hid_temperature_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	temp_chans = devm_kmemdup(&indio_dev->dev, temperature_channels,
-				sizeof(temperature_channels), GFP_KERNEL);
+	temp_chans = devm_kmemdup(&pdev->dev, temperature_channels,
+				  sizeof(temperature_channels), GFP_KERNEL);
 	if (!temp_chans)
 		return -ENOMEM;
 

-- 
2.34.1

Re: [PATCH v2 6/6] iio: temperature: hid-sensor-temperature: use common device for devres

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Changing the devm_kmemdup() parent from `&indio_dev->dev` to `&pdev->dev` introduces a Use-After-Free vulnerability by violating the IIO device lifetime model.
--

commit f64b0b02100e325f644f897f84be1fbd188c0d40
Author: Sanjay Chitroda <sanjayembeddedse@gmail.com>

iio: temperature: hid-sensor-temperature: use common device for devres

This commit changes the device used for devm_kmemdup() from the IIO device
to the platform device. This aims to consolidate devres ownership under a
single parent device.

> diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c
> index 18da85e6c60ed..6dfb606a53af3 100644
> --- a/drivers/iio/temperature/hid-sensor-temperature.c
> +++ b/drivers/iio/temperature/hid-sensor-temperature.c
> @@ -213,8 +213,8 @@ static int hid_temperature_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	temp_chans = devm_kmemdup(&indio_dev->dev, temperature_channels,
> -				sizeof(temperature_channels), GFP_KERNEL);
> +	temp_chans = devm_kmemdup(&pdev->dev, temperature_channels,
> +				  sizeof(temperature_channels), GFP_KERNEL);

[Severity: High]
Could tying the channel array allocated here in hid_temperature_probe() to
the platform device's devres introduce a use-after-free regression if an
in-kernel consumer holds a reference to the IIO device?

If an in-kernel IIO consumer, such as iio_hwmon, acquires a reference to a
channel of this device via iio_channel_get(), the reference count of the
logical IIO device (indio_dev) is incremented.

When the platform device (pdev) is unbound, the devres cleanup for pdev will
run and free the temp_chans array because its parent is now pdev->dev. The
devres cleanup then calls iio_device_unregister(), which drops the driver's
reference to indio_dev, but indio_dev itself remains alive due to the
consumer's reference.

If the consumer subsequently calls an IIO API like iio_read_channel_label()
or iio_get_channel_ext_info_count(), can these APIs directly dereference the
channel pointers into the freed temp_chans array without checking if the
device is unregistered?

Should the temp_chans array remain tied to &indio_dev->dev to ensure its
lifetime safely extends until the IIO device itself is fully released?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260702-15-jun-hid-iio-alignment-v2-0-b87f01f5efbc@gmail.com?part=6

Re: [PATCH v2 6/6] iio: temperature: hid-sensor-temperature: use common device for devres

[Jonathan Cameron]

On Thu, 02 Jul 2026 21:48:03 +0530
Sanjay Chitroda via B4 Relay <devnull+sanjayembeddedse.gmail.com@kernel.org> wrote:

> From: Sanjay Chitroda <sanjayembeddedse@gmail.com>
> 
> kmemdup() is used for memory that is logically tied to the HID
> platform device, even though the driver binds into the IIO framework.
> 
> Using &indio_dev->dev for devres allocations works functionally, but it
> results in two separate devres ownership trees—one for the HID
> platform device (pdev) and another for the IIO device (indio_dev).
> 
> The devres framework is intended to have a single, well-defined parent
> device. Since the memory originates from HID sensor probing and is not
> IIO-specific, &pdev->dev is the correct and logical owner.
> 
> Switch to using the platform device for devm_kmemdup() so that all
> resources are released deterministically and consistently.
> 
> Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Applied this one.
> ---
>  drivers/iio/temperature/hid-sensor-temperature.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c
> index 18da85e6c60e..6dfb606a53af 100644
> --- a/drivers/iio/temperature/hid-sensor-temperature.c
> +++ b/drivers/iio/temperature/hid-sensor-temperature.c
> @@ -213,8 +213,8 @@ static int hid_temperature_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	temp_chans = devm_kmemdup(&indio_dev->dev, temperature_channels,
> -				sizeof(temperature_channels), GFP_KERNEL);
> +	temp_chans = devm_kmemdup(&pdev->dev, temperature_channels,
> +				  sizeof(temperature_channels), GFP_KERNEL);
>  	if (!temp_chans)
>  		return -ENOMEM;
>  
>