[syzbot] [input?] [usb?] WARNING: ODEBUG bug in corsair_remove

[syzbot] [input?] [usb?] WARNING: ODEBUG bug in corsair_remove

[syzbot]

Hello,

syzbot found the following issue on:

HEAD commit:    2697ef8943c9 Add linux-next specific files for 20260813
git tree:       linux-next
console output: https://syzkaller.appspot.com/x/log.txt?x=14b5ac79580000
kernel config:  https://syzkaller.appspot.com/x/.config?x=7b15c0e5cf4b66b8
dashboard link: https://syzkaller.appspot.com/bug?extid=0a031a76585d1c7e737d
compiler:       Debian clang version 22.1.8 (++20260613092233+e80beda6e255-1~exp1~20260613092250.77), Debian LLD 22.1.8
syz repro:      https://syzkaller.appspot.com/x/repro.syz?x=1305d149580000

Downloadable assets:
disk image: https://storage.googleapis.com/syzbot-assets/4cbe50aa5264/disk-2697ef89.raw.xz
vmlinux: https://storage.googleapis.com/syzbot-assets/fcf42545947a/vmlinux-2697ef89.xz
kernel image: https://storage.googleapis.com/syzbot-assets/aef0f9050c29/bzImage-2697ef89.xz

IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+0a031a76585d1c7e737d@syzkaller.appspotmail.com

corsair 0003:1B1C:1B02.0001: hidraw0: USB HID v0.00 Device [HID 1b1c:1b02] on usb-dummy_hcd.0-1/input0
corsair 0003:1B1C:1B02.0001: Failed to get K90 initial state (error -71).
usb 1-1: USB disconnect, device number 2
------------[ cut here ]------------
ODEBUG: free active (active state 0) object: ffff88807780a2c8 object type: work_struct hint: k90_record_led_work+0x0/0x1e0 drivers/hid/hid-corsair.c:-1
WARNING: lib/debugobjects.c:632 at debug_print_object+0xec/0x230 lib/debugobjects.c:629, CPU#0: kworker/0:3/5733
Modules linked in:
CPU: 0 UID: 0 PID: 5733 Comm: kworker/0:3 Not tainted syzkaller #0 PREEMPT(full) 
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
Workqueue: usb_hub_wq hub_event
RIP: 0010:debug_print_object+0x18a/0x230 lib/debugobjects.c:629
Code: f8 48 c1 e8 03 80 3c 18 00 74 08 4c 89 ff e8 dd 25 50 fd 4d 8b 0f 4c 89 ef 48 8b 74 24 08 48 89 ea 44 89 e1 4d 89 f0 ff 34 24 <67> 48 0f b9 3a 48 83 c4 08 ff 05 13 3b 93 0b 48 83 c4 10 5b 41 5c
RSP: 0018:ffffc90002f7efd0 EFLAGS: 00010246
RAX: 1ffffffff1816f44 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: ffffffff8c6cbd40 RSI: ffffffff8c6cb7c0 RDI: ffffffff90843b50
RBP: ffffffff8c6cbd40 R08: ffff88807780a2c8 R09: ffffffff8c0b8c40
R10: dffffc0000000000 R11: ffffffff818f5880 R12: 0000000000000000
R13: ffffffff90843b50 R14: ffff88807780a2c8 R15: ffffffff8c0b7a20
FS:  0000000000000000(0000) GS:ffff888124d03000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562675362520 CR3: 000000007f9c2000 CR4: 00000000003526f0
Call Trace:
 <TASK>
 __debug_check_no_obj_freed lib/debugobjects.c:1171 [inline]
 debug_check_no_obj_freed+0x2e3/0x450 lib/debugobjects.c:1201
 slab_free_hook mm/slub.c:2679 [inline]
 slab_free mm/slub.c:6499 [inline]
 kfree+0x13e/0x650 mm/slub.c:6792
 k90_cleanup_macro_functions drivers/hid/hid-corsair.c:547 [inline]
 corsair_remove+0xfd/0x260 drivers/hid/hid-corsair.c:602
 hid_device_remove+0xc5/0x1c0 drivers/hid/hid-core.c:2901
 device_remove drivers/base/dd.c:616 [inline]
 __device_release_driver drivers/base/dd.c:1349 [inline]
 device_release_driver_internal+0x48b/0x880 drivers/base/dd.c:1372
 bus_remove_device+0x444/0x560 drivers/base/bus.c:664
 device_del+0x524/0x8f0 drivers/base/core.c:3965
 hid_remove_device drivers/hid/hid-core.c:3130 [inline]
 hid_destroy_device+0x6b/0x1b0 drivers/hid/hid-core.c:3152
 usbhid_disconnect+0x9f/0xc0 drivers/hid/usbhid/hid-core.c:1479
 usb_unbind_interface+0x295/0x9f0 drivers/usb/core/driver.c:461
 device_remove drivers/base/dd.c:618 [inline]
 __device_release_driver drivers/base/dd.c:1349 [inline]
 device_release_driver_internal+0x4f5/0x880 drivers/base/dd.c:1372
 bus_remove_device+0x444/0x560 drivers/base/bus.c:664
 device_del+0x524/0x8f0 drivers/base/core.c:3965
 usb_disable_device+0x3d4/0x8d0 drivers/usb/core/message.c:1478
 usb_disconnect+0x346/0x9a0 drivers/usb/core/hub.c:2350
 hub_port_connect drivers/usb/core/hub.c:5420 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5720 [inline]
 port_event drivers/usb/core/hub.c:5884 [inline]
 hub_event+0x1bbb/0x4d30 drivers/usb/core/hub.c:5966
 process_one_work kernel/workqueue.c:3386 [inline]
 process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3469
 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3550
 kthread+0x38b/0x480 kernel/kthread.c:436
 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
 </TASK>
----------------
Code disassembly (best guess):
   0:	f8                   	clc
   1:	48 c1 e8 03          	shr    $0x3,%rax
   5:	80 3c 18 00          	cmpb   $0x0,(%rax,%rbx,1)
   9:	74 08                	je     0x13
   b:	4c 89 ff             	mov    %r15,%rdi
   e:	e8 dd 25 50 fd       	call   0xfd5025f0
  13:	4d 8b 0f             	mov    (%r15),%r9
  16:	4c 89 ef             	mov    %r13,%rdi
  19:	48 8b 74 24 08       	mov    0x8(%rsp),%rsi
  1e:	48 89 ea             	mov    %rbp,%rdx
  21:	44 89 e1             	mov    %r12d,%ecx
  24:	4d 89 f0             	mov    %r14,%r8
  27:	ff 34 24             	push   (%rsp)
* 2a:	67 48 0f b9 3a       	ud1    (%edx),%rdi <-- trapping instruction
  2f:	48 83 c4 08          	add    $0x8,%rsp
  33:	ff 05 13 3b 93 0b    	incl   0xb933b13(%rip)        # 0xb933b4c
  39:	48 83 c4 10          	add    $0x10,%rsp
  3d:	5b                   	pop    %rbx
  3e:	41 5c                	pop    %r12


---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.

syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.

If the report is already addressed, let syzbot know by replying with:
#syz fix: exact-commit-title

If you want syzbot to run the reproducer, reply with:
#syz test: git://repo/address.git branch-or-commit-hash
If you attach or paste a git patch, syzbot will apply it before testing.

If you want to overwrite report's subsystems, reply with:
#syz set subsystems: new-subsystem
(See the list of subsystem names on the web dashboard)

If the report is a duplicate of another one, reply with:
#syz dup: exact-subject-of-another-report

If you want to undo deduplication, reply with:
#syz undup