From: Marek Vasut <marek.vasut@mailbox.org>
To: Frank Li <Frank.li@nxp.com>
Cc: linux-input@vger.kernel.org, Conor Dooley <conor+dt@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Job Noorman <job@noorman.info>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v2 2/2] Input: ili210x - add support for polling mode
Date: Thu, 15 Jan 2026 17:19:40 +0100 [thread overview]
Message-ID: <94402ad7-a28b-44db-b1b6-181c2d129cef@mailbox.org> (raw)
In-Reply-To: <aWkHzd8pKJh91Dkr@lizhi-Precision-Tower-5810>
On 1/15/26 4:29 PM, Frank Li wrote:
> On Thu, Jan 15, 2026 at 03:34:59AM +0100, Marek Vasut wrote:
>> There are designs incorporating Ilitek ILI2xxx touch controller that
>> do not connect interrupt pin, for example Waveshare 13.3" DSI display.
>> To support such systems use polling mode for the input device when I2C
>> client does not have interrupt assigned to it.
>>
>> Factor out ili210x_firmware_update_noirq() to allow conditional scoped
>> guard around this code. The scoped guard has to be applied only in case
>> the IRQ line is connected, and not applied otherwise.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
>> ---
>> Cc: Conor Dooley <conor+dt@kernel.org>
>> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
>> Cc: Frank Li <Frank.Li@nxp.com>
>> Cc: Job Noorman <job@noorman.info>
>> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
>> Cc: Rob Herring <robh@kernel.org>
>> Cc: devicetree@vger.kernel.org
>> Cc: linux-input@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> Cc: linux-renesas-soc@vger.kernel.org
>> ---
>> V2: Test client->irq > 0 for IRQ presence
>> ---
>> drivers/input/touchscreen/ili210x.c | 84 ++++++++++++++++++++---------
>> 1 file changed, 60 insertions(+), 24 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
>> index fa38d70aded7b..0574f2e86580f 100644
>> --- a/drivers/input/touchscreen/ili210x.c
>> +++ b/drivers/input/touchscreen/ili210x.c
>> @@ -327,9 +327,8 @@ static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata)
>> return contact;
>> }
>>
>
> ...
>>
>> - error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq,
>> - IRQF_ONESHOT, client->name, priv);
>> - if (error) {
>> - dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
>> - error);
>> - return error;
>> + input_set_drvdata(input, priv);
>> +
>> + if (client->irq > 0) {
>> + error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq,
>> + IRQF_ONESHOT, client->name, priv);
>> + if (error) {
>> + dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
>> + error);
>> + return error;
>
> return dev_err_probe()
Fixed mostly in new patch part of V3 , thanks.
next prev parent reply other threads:[~2026-01-15 16:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-15 2:34 [PATCH v2 1/2] dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek Marek Vasut
2026-01-15 2:34 ` [PATCH v2 2/2] Input: ili210x - add support for polling mode Marek Vasut
2026-01-15 15:29 ` Frank Li
2026-01-15 16:19 ` Marek Vasut [this message]
2026-01-15 15:25 ` [PATCH v2 1/2] dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=94402ad7-a28b-44db-b1b6-181c2d129cef@mailbox.org \
--to=marek.vasut@mailbox.org \
--cc=Frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=job@noorman.info \
--cc=krzk+dt@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox