Re: [PATCH v2 2/2] Input: ili210x - add support for polling mode

[Frank Li <Frank.li@nxp.com>]

On Thu, Jan 15, 2026 at 03:34:59AM +0100, Marek Vasut wrote:
> There are designs incorporating Ilitek ILI2xxx touch controller that
> do not connect interrupt pin, for example Waveshare 13.3" DSI display.
> To support such systems use polling mode for the input device when I2C
> client does not have interrupt assigned to it.
>
> Factor out ili210x_firmware_update_noirq() to allow conditional scoped
> guard around this code. The scoped guard has to be applied only in case
> the IRQ line is connected, and not applied otherwise.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: Frank Li <Frank.Li@nxp.com>
> Cc: Job Noorman <job@noorman.info>
> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-input@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-renesas-soc@vger.kernel.org
> ---
> V2: Test client->irq > 0 for IRQ presence
> ---
>  drivers/input/touchscreen/ili210x.c | 84 ++++++++++++++++++++---------
>  1 file changed, 60 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
> index fa38d70aded7b..0574f2e86580f 100644
> --- a/drivers/input/touchscreen/ili210x.c
> +++ b/drivers/input/touchscreen/ili210x.c
> @@ -327,9 +327,8 @@ static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata)
>  	return contact;
>  }
>

...
>
> -	error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq,
> -					  IRQF_ONESHOT, client->name, priv);
> -	if (error) {
> -		dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
> -			error);
> -		return error;
> +	input_set_drvdata(input, priv);
> +
> +	if (client->irq > 0) {
> +		error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq,
> +						  IRQF_ONESHOT, client->name, priv);
> +		if (error) {
> +			dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
> +				error);
> +			return error;

return dev_err_probe()

Frank
> +		}
> +	} else {
> +		error = input_setup_polling(input, ili210x_work_i2c_poll);
> +		if (error) {
> +			dev_err(dev, "Could not set up polling mode, err: %d\n",
> +				error);
> +			return error;
> +		}
> +		input_set_poll_interval(input, ILI2XXX_POLL_PERIOD);
>  	}
>
>  	error = devm_add_action_or_reset(dev, ili210x_stop, priv);
> --
> 2.51.0
>