Linux Input/HID development
 help / color / mirror / Atom feed
From: Denis Benato <denis.benato@linux.dev>
To: Paolo Pisati <p.pisati@gmail.com>, Jiri Kosina <jikos@kernel.org>,
	Benjamin Tissoires <bentiss@kernel.org>
Cc: "Joshua Leivenzon" <hacker1024@users.sourceforge.net>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Luke Jones" <luke@ljones.dev>, "Ivan Levchenko" <me@livan.pro>,
	"Rebecca Mara Müller" <rebecca.mara@posteo.de>,
	"Nathan Chancellor" <nathan@kernel.org>
Subject: Re: [PATCH v3 3/7] HID: asus: Force hid-input to bind to the Zenbook Duo hotkey interface
Date: Sun, 18 Oct 2026 18:06:36 +0200	[thread overview]
Message-ID: <f93c315e-db6f-4322-9081-e192da12e58f@linux.dev> (raw)
In-Reply-To: <20261013104033.36079-4-p.pisati@gmail.com>


On 10/13/26 12:40, Paolo Pisati wrote:
> From: Joshua Leivenzon <hacker1024@users.sourceforge.net>
>
> The Zenbook Duo USB keyboard reports its hotkeys on a dedicated
> interface, separate from the keyboard and consumer control ones, that
> only contains ASUS vendor usage collections. hid-input does not
> consider those an input application and never binds to the interface,
> so the hotkeys are never mapped.
>
> Pass HID_CONNECT_HIDINPUT_FORCE for the interface of Zenbook Duo
> keyboards that carries the ASUS vendor collection, which skips that
> check, so the vendor usages go through asus_input_mapping() like on
> any other ASUS keyboard. The other interfaces either have a proper
> input application or nothing worth an input device.
>
> Signed-off-by: Joshua Leivenzon <hacker1024@users.sourceforge.net>
> [pisati: use HID_CONNECT_HIDINPUT_FORCE on the vendor interface instead
>  of injecting a fake keyboard collection into its report descriptor]
> Assisted-by: LLM

Same as the other one, Assisted-by isn't right like this... About the rest:

Reviewed-by: Denis Benato <denis.benato@linux.dev>

> Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
> Tested-by: Rebecca Mara Müller <rebecca.mara@posteo.de> # UX8407AA
> ---
>  drivers/hid/hid-asus.c | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
> index 242e273e4cb3..d69431615c27 100644
> --- a/drivers/hid/hid-asus.c
> +++ b/drivers/hid/hid-asus.c
> @@ -1405,6 +1405,7 @@ static int asus_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  	struct asus_drvdata *drvdata;
>  	struct hid_report *rep;
>  	bool is_vendor = false;
> +	unsigned int connect_mask;
>  	int ret;
>  
>  	drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL);
> @@ -1500,7 +1501,18 @@ static int asus_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  		return ret;
>  	}
>  
> -	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
> +	/*
> +	 * The Zenbook Duo keyboard reports its hotkeys on a dedicated USB
> +	 * interface that only has vendor usage collections, which hid-input
> +	 * does not consider an input application. Make it bind to the
> +	 * interface carrying the ASUS vendor collection anyway so the
> +	 * hotkeys get mapped.
> +	 */

I would shorten this comment, but I'm not good in this and the code is okay so
I gave reviewed-by regardless: do what you wish with my suggestion.

> +	connect_mask = HID_CONNECT_DEFAULT;
> +	if ((drvdata->quirks & QUIRK_ZENBOOK_DUO_KEYBOARD) && is_vendor)
> +		connect_mask |= HID_CONNECT_HIDINPUT_FORCE;
> +
> +	ret = hid_hw_start(hdev, connect_mask);
>  	if (ret) {
>  		asus_worker_stop(drvdata->worker);
>  		hid_err(hdev, "Asus hw start failed: %d\n", ret);

  reply	other threads:[~2026-10-18 16:06 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-13 10:39 [PATCH v3 0/7] HID: asus: ASUS Zenbook Duo keyboard support Paolo Pisati
2026-10-13 10:39 ` [PATCH v3 1/7] HID: asus: Fix up Zenbook Duo report descriptors Paolo Pisati
2026-10-18 15:50   ` Denis Benato
2026-10-18 16:18     ` Rebecca Mara Müller
2026-10-18 17:52       ` Denis Benato
2026-10-13 10:39 ` [PATCH v3 2/7] HID: asus: Add missing Zenbook Duo hotkeys Paolo Pisati
2026-10-18 15:55   ` Denis Benato
2026-10-18 21:38     ` Nathan Chancellor
2026-10-18 21:39       ` Denis Benato
2026-10-13 10:40 ` [PATCH v3 3/7] HID: asus: Force hid-input to bind to the Zenbook Duo hotkey interface Paolo Pisati
2026-10-18 16:06   ` Denis Benato [this message]
2026-10-13 10:40 ` [PATCH v3 4/7] HID: asus: Cycle the platform profile from the Zenbook Duo profile key Paolo Pisati
2026-10-18 16:27   ` Denis Benato
2026-10-13 10:40 ` [PATCH v3 5/7] HID: asus: Do not send feature reports larger than declared Paolo Pisati
2026-10-18 16:52   ` Denis Benato
2026-10-13 10:40 ` [PATCH v3 6/7] HID: asus: add prod-id, quirk for Zenbook Duo keyboard Paolo Pisati
2026-10-18 16:57   ` Denis Benato
2026-10-18 21:43     ` Nathan Chancellor
2026-10-18 21:46       ` Denis Benato
2026-10-13 10:40 ` [PATCH v3 7/7] HID: asus: Re-send the Zenbook Duo keyboard handshake after probe Paolo Pisati
2026-10-18 17:10   ` Denis Benato
2026-10-18 19:18     ` Rebecca Mara Müller
2026-10-18 19:48       ` Denis Benato
2026-10-19  6:12         ` Rebecca Mara Müller
2026-10-19 11:03           ` Denis Benato
2026-10-19 13:36             ` Rebecca Mara Müller
2026-10-19 20:38               ` Denis Benato
2026-10-20  7:42                 ` Rebecca Mara Müller
2026-10-13 11:45 ` [PATCH v3 0/7] HID: asus: ASUS Zenbook Duo keyboard support Rebecca Mara Müller
2026-10-13 13:56   ` Denis Benato
2026-10-14 13:21     ` Paolo Pisati
2026-10-18 17:21       ` Denis Benato

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f93c315e-db6f-4322-9081-e192da12e58f@linux.dev \
    --to=denis.benato@linux.dev \
    --cc=bentiss@kernel.org \
    --cc=hacker1024@users.sourceforge.net \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luke@ljones.dev \
    --cc=me@livan.pro \
    --cc=nathan@kernel.org \
    --cc=p.pisati@gmail.com \
    --cc=rebecca.mara@posteo.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox