* Re: [PATCH v2 6/6] x86/vmware: Add TDX hypercall support
From: Dave Hansen @ 2023-12-05 21:24 UTC (permalink / raw)
To: Borislav Petkov, Alexey Makhalov
Cc: linux-kernel, virtualization, hpa, dave.hansen, bp, mingo, tglx,
x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
maarten.lankhorst, horms
In-Reply-To: <20231204103100.GYZW2qZE9tbGMtuVgY@fat_crate.local>
On 12/4/23 02:31, Borislav Petkov wrote:
> On Fri, Dec 01, 2023 at 03:24:52PM -0800, Alexey Makhalov wrote:
>> +#ifdef CONFIG_INTEL_TDX_GUEST
>> +/* __tdx_hypercall() is not exported. So, export the wrapper */
>> +void vmware_tdx_hypercall_args(struct tdx_module_args *args)
>> +{
>> + __tdx_hypercall(args);
>> +}
>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
> Uuuh, lovely. I'd like to see what the TDX folks think about this
> export first.
I don't really like it much. This does a generic thing (make a TDX
hypercall) with a specific name ("vmware_"). If you want to make an
argument that a certain chunk of the __tdx_hypercall() space is just for
VMWare and you also add a VMWare-specific check and then export *that*,
it might be acceptable.
But I don't want random modules able to make random, unrestricted TDX
hypercalls. That's asking for trouble.
^ permalink raw reply
* Re: [PATCH v2 6/6] x86/vmware: Add TDX hypercall support
From: Alexey Makhalov @ 2023-12-05 21:41 UTC (permalink / raw)
To: Dave Hansen, Borislav Petkov, Alexey Makhalov
Cc: linux-kernel, virtualization, hpa, dave.hansen, bp, mingo, tglx,
x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
maarten.lankhorst, horms
In-Reply-To: <c2519c9a-8518-403a-9bca-cb79a5f2a6e9@intel.com>
On 12/5/23 1:24 PM, Dave Hansen wrote:
> On 12/4/23 02:31, Borislav Petkov wrote:
>> On Fri, Dec 01, 2023 at 03:24:52PM -0800, Alexey Makhalov wrote:
>>> +#ifdef CONFIG_INTEL_TDX_GUEST
>>> +/* __tdx_hypercall() is not exported. So, export the wrapper */
>>> +void vmware_tdx_hypercall_args(struct tdx_module_args *args)
>>> +{
>>> + __tdx_hypercall(args);
>>> +}
>>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
>> Uuuh, lovely. I'd like to see what the TDX folks think about this
>> export first.
>
> I don't really like it much. This does a generic thing (make a TDX
> hypercall) with a specific name ("vmware_"). If you want to make an
> argument that a certain chunk of the __tdx_hypercall() space is just for
> VMWare and you also add a VMWare-specific check and then export *that*,
> it might be acceptable.
>
> But I don't want random modules able to make random, unrestricted TDX
> hypercalls. That's asking for trouble.
Considering exporting of __tdx_hypercall for random modules is not an
option, what VMware specific checks you are suggesting?
--
This electronic communication and the information and any files transmitted
with it, or attached to it, are confidential and are intended solely for
the use of the individual or entity to whom it is addressed and may contain
information that is confidential, legally privileged, protected by privacy
laws, or otherwise restricted from disclosure to anyone else. If you are
not the intended recipient or the person responsible for delivering the
e-mail to the intended recipient, you are hereby notified that any use,
copying, distributing, dissemination, forwarding, printing, or copying of
this e-mail is strictly prohibited. If you received this e-mail in error,
please return the e-mail to the sender, delete it from your computer, and
destroy any printed copy of it.
^ permalink raw reply
* Re: [PATCH v1 2/2] Input: Add Himax HX83102J touchscreen driver
From: kernel test robot @ 2023-12-05 21:56 UTC (permalink / raw)
To: Allen_Lin, dmitry.torokhov, robh+dt, krzysztof.kozlowski+dt,
conor+dt, jikos, benjamin.tissoires, linux-input, devicetree,
linux-kernel
Cc: oe-kbuild-all, Allen_Lin
In-Reply-To: <TY0PR06MB5611228C6B67733DC93842C99E85A@TY0PR06MB5611.apcprd06.prod.outlook.com>
Hi Allen_Lin,
kernel test robot noticed the following build warnings:
[auto build test WARNING on hid/for-next]
[also build test WARNING on dtor-input/next dtor-input/for-linus robh/for-next linus/master v6.7-rc4 next-20231205]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Allen_Lin/Input-Add-Himax-HX83102J-touchscreen-driver/20231205-180837
base: https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git for-next
patch link: https://lore.kernel.org/r/TY0PR06MB5611228C6B67733DC93842C99E85A%40TY0PR06MB5611.apcprd06.prod.outlook.com
patch subject: [PATCH v1 2/2] Input: Add Himax HX83102J touchscreen driver
config: m68k-randconfig-r052-20231206 (https://download.01.org/0day-ci/archive/20231206/202312060543.P5vKz1xP-lkp@intel.com/config)
compiler: m68k-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231206/202312060543.P5vKz1xP-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202312060543.P5vKz1xP-lkp@intel.com/
All warnings (new ones prefixed by >>):
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c:435:5: warning: no previous prototype for 'himax_ts_register_interrupt' [-Wmissing-prototypes]
435 | int himax_ts_register_interrupt(struct himax_ts_data *ts)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c:472:5: warning: no previous prototype for 'himax_ts_unregister_interrupt' [-Wmissing-prototypes]
472 | int himax_ts_unregister_interrupt(struct himax_ts_data *ts)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c:554:6: warning: no previous prototype for 'hx_check_power_status' [-Wmissing-prototypes]
554 | void hx_check_power_status(struct work_struct *work)
| ^~~~~~~~~~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c:566:5: warning: no previous prototype for 'pwr_notifier_callback' [-Wmissing-prototypes]
566 | int pwr_notifier_callback(struct notifier_block *self,
| ^~~~~~~~~~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c:580:6: warning: no previous prototype for 'himax_pwr_register' [-Wmissing-prototypes]
580 | void himax_pwr_register(struct work_struct *work)
| ^~~~~~~~~~~~~~~~~~
In file included from include/asm-generic/bug.h:22,
from arch/m68k/include/asm/bug.h:32,
from include/linux/bug.h:5,
from include/linux/thread_info.h:13,
from include/asm-generic/preempt.h:5,
from ./arch/m68k/include/generated/asm/preempt.h:1,
from include/linux/preempt.h:79,
from include/linux/spinlock.h:56,
from include/linux/mmzone.h:8,
from include/linux/gfp.h:7,
from include/linux/slab.h:16,
from drivers/hid/hid-himax-83102j.h:6,
from drivers/hid/hid-himax-83102j.c:16:
drivers/hid/hid-himax-83102j.c: In function 'hx_hid_get_raw_report':
include/linux/kern_levels.h:5:25: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
include/linux/printk.h:427:25: note: in definition of macro 'printk_index_wrap'
427 | _p_func(_fmt, ##__VA_ARGS__); \
| ^~~~
include/linux/printk.h:129:17: note: in expansion of macro 'printk'
129 | printk(fmt, ##__VA_ARGS__); \
| ^~~~~~
include/linux/printk.h:585:9: note: in expansion of macro 'no_printk'
585 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~~
include/linux/kern_levels.h:15:25: note: in expansion of macro 'KERN_SOH'
15 | #define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
| ^~~~~~~~
include/linux/printk.h:585:19: note: in expansion of macro 'KERN_DEBUG'
585 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~~~
drivers/hid/hid-himax-83102j.h:104:24: note: in expansion of macro 'pr_debug'
104 | #define D(fmt, arg...) pr_debug("[HXTP][DEBUG][%s]: " fmt "\n", __func__, ##arg)
| ^~~~~~~~
drivers/hid/hid-himax-83102j.c:1768:9: note: in expansion of macro 'D'
1768 | D("reportnum:%d, len:%lu, report_type:%d", reportnum, len, report_type);
| ^
drivers/hid/hid-himax-83102j.c: In function 'hx_raw_request':
include/linux/kern_levels.h:5:25: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
include/linux/printk.h:427:25: note: in definition of macro 'printk_index_wrap'
427 | _p_func(_fmt, ##__VA_ARGS__); \
| ^~~~
include/linux/printk.h:129:17: note: in expansion of macro 'printk'
129 | printk(fmt, ##__VA_ARGS__); \
| ^~~~~~
include/linux/printk.h:585:9: note: in expansion of macro 'no_printk'
585 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~~
include/linux/kern_levels.h:15:25: note: in expansion of macro 'KERN_SOH'
15 | #define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
| ^~~~~~~~
include/linux/printk.h:585:19: note: in expansion of macro 'KERN_DEBUG'
585 | no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~~~
drivers/hid/hid-himax-83102j.h:104:24: note: in expansion of macro 'pr_debug'
104 | #define D(fmt, arg...) pr_debug("[HXTP][DEBUG][%s]: " fmt "\n", __func__, ##arg)
| ^~~~~~~~
drivers/hid/hid-himax-83102j.c:1798:9: note: in expansion of macro 'D'
1798 | D("report num %d, len %lu, rtype %d, reqtype %d", reportnum, len, rtype, reqtype);
| ^
drivers/hid/hid-himax-83102j.c: At top level:
drivers/hid/hid-himax-83102j.c:2262:6: warning: no previous prototype for 'hx_hid_update' [-Wmissing-prototypes]
2262 | void hx_hid_update(struct work_struct *work)
| ^~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c:2302:6: warning: no previous prototype for 'himax_report_data_deinit' [-Wmissing-prototypes]
2302 | void himax_report_data_deinit(struct himax_ts_data *ts)
| ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c:2309:5: warning: no previous prototype for 'himax_chip_suspend' [-Wmissing-prototypes]
2309 | int himax_chip_suspend(struct himax_ts_data *ts)
| ^~~~~~~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c:2349:5: warning: no previous prototype for 'himax_chip_resume' [-Wmissing-prototypes]
2349 | int himax_chip_resume(struct himax_ts_data *ts)
| ^~~~~~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c:2540:6: warning: no previous prototype for 'himax_chip_deinit' [-Wmissing-prototypes]
2540 | void himax_chip_deinit(struct himax_ts_data *ts)
| ^~~~~~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c: In function 'himax_platform_init':
drivers/hid/hid-himax-83102j.c:2593:13: warning: variable 'err' set but not used [-Wunused-but-set-variable]
2593 | int err = PROBE_FAIL;
| ^~~
drivers/hid/hid-himax-83102j.c: At top level:
>> drivers/hid/hid-himax-83102j.c:2674:5: warning: no previous prototype for 'himax_parse_dt' [-Wmissing-prototypes]
2674 | int himax_parse_dt(struct device_node *dt, struct himax_platform_data *pdata)
| ^~~~~~~~~~~~~~
drivers/hid/hid-himax-83102j.c:2862:5: warning: no previous prototype for 'himax_spi_drv_probe' [-Wmissing-prototypes]
2862 | int himax_spi_drv_probe(struct spi_device *spi)
| ^~~~~~~~~~~~~~~~~~~
vim +/himax_parse_dt +2674 drivers/hid/hid-himax-83102j.c
2539
> 2540 void himax_chip_deinit(struct himax_ts_data *ts)
2541 {
2542 kfree(ts->zf_update_cfg_buffer);
2543 ts->zf_update_cfg_buffer = NULL;
2544
2545 himax_ts_unregister_interrupt(ts);
2546
2547 himax_report_data_deinit(ts);
2548
2549 cancel_delayed_work_sync(&ts->work_resume_delayed_work);
2550 destroy_workqueue(ts->himax_resume_delayed_work_wq);
2551 destroy_workqueue(ts->himax_hid_debug_wq);
2552
2553 ts->probe_fail_flag = 0;
2554
2555 I("Common section deinited!");
2556 }
2557
2558 static void himax_platform_deinit(struct himax_ts_data *ts)
2559 {
2560 struct himax_platform_data *pdata = NULL;
2561
2562 I("entering");
2563
2564 if (!ts) {
2565 E("ts is NULL");
2566 return;
2567 }
2568
2569 pdata = ts->pdata;
2570 if (!pdata) {
2571 E("pdata is NULL");
2572 return;
2573 }
2574
2575 himax_gpio_power_deconfig(pdata);
2576
2577 kfree(ts->ic_data);
2578 ts->ic_data = NULL;
2579
2580 kfree(pdata);
2581 pdata = NULL;
2582 ts->pdata = NULL;
2583
2584 kfree(ts->xfer_buff);
2585 ts->xfer_buff = NULL;
2586
2587 I("exit");
2588 }
2589
2590 static bool himax_platform_init(struct himax_ts_data *ts,
2591 struct himax_platform_data *local_pdata)
2592 {
2593 int err = PROBE_FAIL;
2594 struct himax_platform_data *pdata;
2595
2596 I("entering");
2597 ts->xfer_buff = kcalloc
2598 (HX_FULL_STACK_RAWDATA_SIZE, sizeof(u8), GFP_KERNEL);
2599 if (!ts->xfer_buff) {
2600 err = -ENOMEM;
2601 goto err_xfer_buff_fail;
2602 }
2603
2604 I("PDATA START");
2605 pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
2606 if (!pdata) { /*Allocate Platform data space*/
2607 err = -ENOMEM;
2608 goto err_dt_platform_data_fail;
2609 }
2610
2611 I("ts->ic_data START");
2612 ts->ic_data = kzalloc(sizeof(*ts->ic_data), GFP_KERNEL);
2613 if (!ts->ic_data) { /*Allocate IC data space*/
2614 err = -ENOMEM;
2615 goto err_dt_ic_data_fail;
2616 }
2617 memset(ts->ic_data, 0xFF, sizeof(struct himax_ic_data));
2618 /* default 128k, different size please follow HX83121A style */
2619 ts->ic_data->flash_size = 131072;
2620
2621 memcpy(pdata, local_pdata, sizeof(struct himax_platform_data));
2622 ts->pdata = pdata;
2623 pdata->ts = ts;
2624 ts->rst_gpio = pdata->gpio_reset;
2625
2626 if (himax_gpio_power_config(ts, pdata) < 0) {
2627 E("gpio config fail, exit!");
2628 goto err_power_config_failed;
2629 }
2630
2631 I("Completed.");
2632
2633 return true;
2634
2635 err_power_config_failed:
2636 kfree(ts->ic_data);
2637 ts->ic_data = NULL;
2638 err_dt_ic_data_fail:
2639 kfree(pdata);
2640 pdata = NULL;
2641 err_dt_platform_data_fail:
2642 kfree(ts->xfer_buff);
2643 ts->xfer_buff = NULL;
2644 err_xfer_buff_fail:
2645 return false;
2646 }
2647
2648 static struct himax_ts_data *get_ts(struct device *dev)
2649 {
2650 struct list_head *listptr = NULL;
2651 struct himax_ts_data *ts = NULL;
2652 struct himax_ts_data *tmp_ts = NULL;
2653
2654 if (!g_himax_ts->dev ||
2655 g_himax_ts->dev == dev) {
2656 D("Found 1st device : %p", dev);
2657 return g_himax_ts;
2658 }
2659
2660 D("Matching for device %p", dev);
2661 list_for_each(listptr, &g_himax_ts->list) {
2662 tmp_ts = list_entry(listptr, struct himax_ts_data, list);
2663 if (tmp_ts->dev == dev) {
2664 ts = tmp_ts;
2665 break;
2666 }
2667 }
2668 if (!ts)
2669 D("No matching device found");
2670
2671 return ts;
2672 }
2673
> 2674 int himax_parse_dt(struct device_node *dt, struct himax_platform_data *pdata)
2675 {
2676 /* pid_fw_name size = length of default_fw_name + length of "_XXXX" +
2677 * length of ".bin" + null terminator.
2678 */
2679 static char pid_fw_name[ARRAY_SIZE(default_fw_name) + 5 + 4 + 1] = {0};
2680 int tmp = 0;
2681 const int pid_prop_args = 2;
2682 u32 data = 0;
2683 int id_gpios[8] = {0};
2684 int counter = 0;
2685 int i = 0;
2686 s16 id_value = -1;
2687 int dts_irq = 0;
2688 int err = 0;
2689
2690 UNUSED(default_fw_name);
2691 if (!dt || !pdata) {
2692 E("DT: dev or pdata is NULL");
2693 return -EINVAL;
2694 }
2695
2696 dts_irq = of_irq_get(dt, 0);
2697 D("DT: dts_irq = %d", dts_irq);
2698 if (dts_irq <= 0) {
2699 if (dts_irq == -EPROBE_DEFER)
2700 E("DT: dts_irq = -EPROBE_DEFER");
2701 return -EIO;
2702 }
2703
2704 pdata->of_irq = dts_irq;
2705 pdata->gpio_irq = -1;
2706
2707 pdata->gpio_reset = of_get_named_gpio(dt, "reset-gpios", 0);
2708 if (!gpio_is_valid(pdata->gpio_reset)) {
2709 I(" DT:gpio-rst value is not valid");
2710 return -EIO;
2711 }
2712
2713 I(" DT:interrupt=%d, reset=%d",
2714 pdata->of_irq, pdata->gpio_reset);
2715 counter = gpiod_count(pdata->ts->dev, "himax,id");
2716 if (counter > 0) {
2717 for (i = 0 ; i < counter ; i++) {
2718 id_gpios[i] = of_get_named_gpio(dt, "himax,id-gpios", i);
2719 if (!gpio_is_valid(id_gpios[i])) {
2720 I(" DT:gpio-id value is not valid");
2721 return -EIO;
2722 }
2723 I(" DT:gpio-id[%d]=%d", i, id_gpios[i]);
2724 }
2725 id_value = 0;
2726 for (i = 0 ; i < counter ; i++) {
2727 gpio_direction_input(id_gpios[i]);
2728 id_value |= gpio_get_value(id_gpios[i]) << i;
2729 }
2730 I(" DT:gpio-id value=%04X", id_value);
2731 pdata->panel_id = id_value;
2732 } else {
2733 pdata->panel_id = -1;
2734 D(" DT:gpio-id not found");
2735 }
2736
2737 // himax,ic_det_delay unit is millisecond
2738 if (of_property_read_u32(dt, "himax,ic-det-delay-ms", &data)) {
2739 pdata->ic_det_delay = 0;
2740 D(" DT:himax,ic-det-delay-ms not found");
2741 } else {
2742 pdata->ic_det_delay = data;
2743 I(" DT:himax,ic-det-delay-ms=%d", pdata->ic_det_delay);
2744 }
2745
2746 // himax,ic_resume_delay unit is millisecond
2747 if (of_property_read_u32(dt, "himax,ic-resume-delay-ms", &data)) {
2748 pdata->ic_resume_delay = 0;
2749 D(" DT:himax,ic-resume-delay-ms not found");
2750 } else {
2751 pdata->ic_resume_delay = data;
2752 I(" DT:himax,ic-resume-delay-ms=%d", pdata->ic_resume_delay);
2753 }
2754
2755 if (of_property_read_bool(dt, "himax,has-flash")) {
2756 pdata->is_zf = false;
2757 D(" DT:himax,has-flash");
2758 } else {
2759 pdata->is_zf = true;
2760 I(" DT:himax,has-flash not found, load firmware from file");
2761 }
2762
2763 if (of_property_read_bool(dt, "vccd-supply")) {
2764 pdata->vccd_supply = regulator_get(pdata->ts->dev, "vccd");
2765 if (IS_ERR(pdata->vccd_supply)) {
2766 E(" DT:failed to get vccd supply");
2767 err = PTR_ERR(pdata->vccd_supply);
2768 pdata->vccd_supply = NULL;
2769 return err;
2770 }
2771 I(" DT:vccd-supply=%p", pdata->vccd_supply);
2772 } else {
2773 pdata->vccd_supply = NULL;
2774 }
2775
2776 if (of_property_read_bool(dt, "vcca-supply")) {
2777 pdata->vcca_supply = regulator_get(pdata->ts->dev, "vcca");
2778 if (IS_ERR(pdata->vcca_supply)) {
2779 E(" DT:failed to get vcca supply");
2780 err = PTR_ERR(pdata->vcca_supply);
2781 pdata->vcca_supply = NULL;
2782 return err;
2783 }
2784 I(" DT:vcca-supply=%p", pdata->vcca_supply);
2785 } else {
2786 pdata->vcca_supply = NULL;
2787 }
2788
2789 /*
2790 * check himax,pid first, if exist then check if it is single.
2791 * Single case: himax,pid = <0x1002>; // 0x1002 is pid value
2792 * Multiple case: himax,pid = <id_value0 00x1001>, <id_value1 0x1002>;
2793 * When id_value >= 0, check the mapping listed to use the pid value.
2794 */
2795 if (of_get_property(dt, "himax,pid", &data)) {
2796 counter = data / (sizeof(u32) * pid_prop_args);
2797
2798 if (!counter) {
2799 // default case, no id->pid mappings
2800 if (of_property_read_u32(dt, "himax,pid", &data)) {
2801 pdata->pid = 0;
2802 D(" DT:himax,pid not found");
2803 goto GET_PID_END;
2804 } else {
2805 goto GET_PID_VALUE;
2806 }
2807 }
2808
2809 if (id_value < 0) {
2810 E(" DT:himax,pid has no matched for id_value=%04X", id_value);
2811 pdata->pid = 0;
2812 goto GET_PID_END;
2813 }
2814
2815 for (i = 0; i < counter; i++) {
2816 if (of_property_read_u32_index(dt, "himax,pid",
2817 i * pid_prop_args, &tmp)) {
2818 D(" DT:himax,pid parsing error!");
2819 pdata->pid = 0;
2820 goto GET_PID_END;
2821 }
2822
2823 if (of_property_read_u32_index(dt, "himax,pid",
2824 i * pid_prop_args + 1, &data)) {
2825 D(" DT:himax,pid parsing error!");
2826 pdata->pid = 0;
2827 goto GET_PID_END;
2828 }
2829
2830 if (tmp == id_value) {
2831 I(" DT:himax,pid mapping: id=%04X => pid=%04X, matched!",
2832 tmp, data);
2833 i = counter;
2834 } else {
2835 I(" DT:himax,pid mapping: id=%04X => pid=%04X", tmp, data);
2836 }
2837 }
2838
2839 if (counter == i) {
2840 E(" DT:himax,pid has no matched for id_value=%04X", id_value);
2841 pdata->pid = 0;
2842 goto GET_PID_END;
2843 }
2844
2845 GET_PID_VALUE:
2846 g_fw_boot_upgrade_name = pid_fw_name;
2847 pdata->pid = data;
2848 snprintf(pid_fw_name, sizeof(pid_fw_name), "%s_%04X%s",
2849 BOOT_UPGRADE_FWNAME, pdata->pid, ".bin");
2850 I(" DT:himax,pid=%04X, fw_name=%s",
2851 pdata->pid, pid_fw_name);
2852 } else {
2853 pdata->pid = 0;
2854 D(" DT:himax,pid not found");
2855 }
2856 GET_PID_END:
2857
2858 return 0;
2859 }
2860
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply
* Re: [PATCH v2 6/6] x86/vmware: Add TDX hypercall support
From: Tim Merrifield @ 2023-12-05 22:43 UTC (permalink / raw)
To: Alexey Makhalov
Cc: Dave Hansen, Borislav Petkov, Alexey Makhalov, linux-kernel,
virtualization, hpa, dave.hansen, mingo, tglx, x86, netdev,
richardcochran, linux-input, dmitry.torokhov, zackr,
linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
maarten.lankhorst, horms
In-Reply-To: <204f743d-2901-4ad2-bbcc-a7857a8644e7@broadcom.com>
Hi Dave and Alexey,
Regarding VMware-specific checks, it may be beneficial to add some
additional checks
such as ensuring that the hypervisor vendor is VMware,
r12==VMWARE_HYPERVISOR_MAGIC,
r10==VMWARE_TDX_VENDOR_LEAF, r11==VMWARE_TDX_HCALL_FUNC and r13 (command) is
restricted to those few commands we expect to be invoked from the
kernel or drivers by VMware-specific
code.
If we add these checks, would folks be OK with exporting this function?
On Tue, Dec 5, 2023 at 3:41 PM Alexey Makhalov
<alexey.makhalov@broadcom.com> wrote:
>
>
>
> On 12/5/23 1:24 PM, Dave Hansen wrote:
> > On 12/4/23 02:31, Borislav Petkov wrote:
> >> On Fri, Dec 01, 2023 at 03:24:52PM -0800, Alexey Makhalov wrote:
> >>> +#ifdef CONFIG_INTEL_TDX_GUEST
> >>> +/* __tdx_hypercall() is not exported. So, export the wrapper */
> >>> +void vmware_tdx_hypercall_args(struct tdx_module_args *args)
> >>> +{
> >>> + __tdx_hypercall(args);
> >>> +}
> >>> +EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
> >> Uuuh, lovely. I'd like to see what the TDX folks think about this
> >> export first.
> >
> > I don't really like it much. This does a generic thing (make a TDX
> > hypercall) with a specific name ("vmware_"). If you want to make an
> > argument that a certain chunk of the __tdx_hypercall() space is just for
> > VMWare and you also add a VMWare-specific check and then export *that*,
> > it might be acceptable.
> >
> > But I don't want random modules able to make random, unrestricted TDX
> > hypercalls. That's asking for trouble.
>
> Considering exporting of __tdx_hypercall for random modules is not an
> option, what VMware specific checks you are suggesting?
>
> --
> This electronic communication and the information and any files transmitted
> with it, or attached to it, are confidential and are intended solely for
> the use of the individual or entity to whom it is addressed and may contain
> information that is confidential, legally privileged, protected by privacy
> laws, or otherwise restricted from disclosure to anyone else. If you are
> not the intended recipient or the person responsible for delivering the
> e-mail to the intended recipient, you are hereby notified that any use,
> copying, distributing, dissemination, forwarding, printing, or copying of
> this e-mail is strictly prohibited. If you received this e-mail in error,
> please return the e-mail to the sender, delete it from your computer, and
> destroy any printed copy of it.
--
This electronic communication and the information and any files transmitted
with it, or attached to it, are confidential and are intended solely for
the use of the individual or entity to whom it is addressed and may contain
information that is confidential, legally privileged, protected by privacy
laws, or otherwise restricted from disclosure to anyone else. If you are
not the intended recipient or the person responsible for delivering the
e-mail to the intended recipient, you are hereby notified that any use,
copying, distributing, dissemination, forwarding, printing, or copying of
this e-mail is strictly prohibited. If you received this e-mail in error,
please return the e-mail to the sender, delete it from your computer, and
destroy any printed copy of it.
^ permalink raw reply
* Re: [PATCH v2 6/6] x86/vmware: Add TDX hypercall support
From: Dave Hansen @ 2023-12-05 23:03 UTC (permalink / raw)
To: Alexey Makhalov, Borislav Petkov, Alexey Makhalov
Cc: linux-kernel, virtualization, hpa, dave.hansen, bp, mingo, tglx,
x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
maarten.lankhorst, horms
In-Reply-To: <204f743d-2901-4ad2-bbcc-a7857a8644e7@broadcom.com>
On 12/5/23 13:41, Alexey Makhalov wrote:
>> I don't really like it much. This does a generic thing (make a TDX
>> hypercall) with a specific name ("vmware_"). If you want to make an
>> argument that a certain chunk of the __tdx_hypercall() space is just for
>> VMWare and you also add a VMWare-specific check and then export *that*,
>> it might be acceptable.
>>
>> But I don't want random modules able to make random, unrestricted TDX
>> hypercalls. That's asking for trouble.
>
> Considering exporting of __tdx_hypercall for random modules is not an
> option, what VMware specific checks you are suggesting?
Make sure it can only be called running on VMWare guests. A check for
X86_HYPER_VMWARE seems simple enough.
Second, unless the space is *HUGE*, you want to be exporting things like
__vmware_platform() or vmware_legacy_x2apic_available(), *NOT* the
underlying hypercall functions.
We want to make sure that the interfaces are well defined and bounded.
^ permalink raw reply
* Re: [PATCH v2 6/6] x86/vmware: Add TDX hypercall support
From: Alexey Makhalov @ 2023-12-06 0:11 UTC (permalink / raw)
To: Dave Hansen, Borislav Petkov, Alexey Makhalov
Cc: linux-kernel, virtualization, hpa, dave.hansen, bp, mingo, tglx,
x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
maarten.lankhorst, horms
In-Reply-To: <bbb6225f-3610-4fcf-86e6-f7468f743d76@intel.com>
On 12/5/23 3:03 PM, Dave Hansen wrote:
> On 12/5/23 13:41, Alexey Makhalov wrote:
>>> I don't really like it much. This does a generic thing (make a TDX
>>> hypercall) with a specific name ("vmware_"). If you want to make an
>>> argument that a certain chunk of the __tdx_hypercall() space is just for
>>> VMWare and you also add a VMWare-specific check and then export *that*,
>>> it might be acceptable.
>>>
>>> But I don't want random modules able to make random, unrestricted TDX
>>> hypercalls. That's asking for trouble.
>>
>> Considering exporting of __tdx_hypercall for random modules is not an
>> option, what VMware specific checks you are suggesting?
>
> Make sure it can only be called running on VMWare guests. A check for
> X86_HYPER_VMWARE seems simple enough.
>
> Second, unless the space is *HUGE*, you want to be exporting things like
> __vmware_platform() or vmware_legacy_x2apic_available(), *NOT* the
> underlying hypercall functions.
>
> We want to make sure that the interfaces are well defined and bounded.
Thanks Dave and Tim for your suggestions. I followed Dave recommendation
to have a simple check for X86_HYPER_VMWARE.
Please review patch 6, which I'll send shortly.
Thanks,
--Alexey
--
This electronic communication and the information and any files transmitted
with it, or attached to it, are confidential and are intended solely for
the use of the individual or entity to whom it is addressed and may contain
information that is confidential, legally privileged, protected by privacy
laws, or otherwise restricted from disclosure to anyone else. If you are
not the intended recipient or the person responsible for delivering the
e-mail to the intended recipient, you are hereby notified that any use,
copying, distributing, dissemination, forwarding, printing, or copying of
this e-mail is strictly prohibited. If you received this e-mail in error,
please return the e-mail to the sender, delete it from your computer, and
destroy any printed copy of it.
^ permalink raw reply
* Re: [RFC PATCH v3 4/5] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
From: Chen-Yu Tsai @ 2023-12-06 2:55 UTC (permalink / raw)
To: AngeloGioacchino Del Regno
Cc: Doug Anderson, Rob Herring, Frank Rowand, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, Wolfram Sang, Benson Leung,
Tzung-Bi Shih, chrome-platform, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, Johan Hovold, Hsin-Yi Wang,
Dmitry Torokhov, andriy.shevchenko, Jiri Kosina, linus.walleij,
broonie, gregkh, hdegoede, james.clark, james, keescook, rafael,
tglx, Jeff LaBundy, linux-input, linux-i2c
In-Reply-To: <3700f05f-2411-4422-972f-f3df690efb84@collabora.com>
On Tue, Dec 5, 2023 at 6:22 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>
> Il 04/12/23 17:50, Doug Anderson ha scritto:
> > Hi,
> >
> > On Sun, Dec 3, 2023 at 10:59 PM Chen-Yu Tsai <wenst@chromium.org> wrote:
> >>
> >> On Sat, Dec 2, 2023 at 8:58 AM Doug Anderson <dianders@chromium.org> wrote:
> >>>
> >>> Hi,
> >>>
> >>> On Tue, Nov 28, 2023 at 12:45 AM Chen-Yu Tsai <wenst@chromium.org> wrote:
> >>>>
> >>>> @@ -44,6 +46,7 @@ trackpad2: trackpad@2c {
> >>>> reg = <0x2c>;
> >>>> hid-descr-addr = <0x0020>;
> >>>> wakeup-source;
> >>>> + status = "fail-needs-probe";
> >>>
> >>> While doing this, you could also remove the hack where the trackpad
> >>> IRQ pinctrl is listed under i2c4.
> >>
> >> Sure. I do think we can do away with it though. According to at least one
> >> schematic, the interrupt line has pull-ups on both sides of the voltage
> >> shifter.
> >>
> >> BTW, The touchscreen doesn't have pinctrl entries. This has pull-ups on
> >> both sides of the voltage shifter as well.
> >
> > I dunno if the convention is different on Mediatek boards, but at
> > least on boards I've been involved with in the past we've always put
> > pinctrl entries just to make things explicit. This meant that we
> > didn't rely on the firmware/bootrom/defaults to leave pulls in any
> > particular state. ...otherwise those external pull-ups could be
> > fighting with internal pull-downs, right?
> >
>
> MediaTek boards aren't special and there's no good reason for those to rely on
> firmware/bootrom/defaults - so there is no good reason to avoid declaring any
> relevant pinctrl entry.
I think this should be migrated to use the proper GPIO bindings: the
GPIO_PULL_UP / GPIO_PULL_DOWN / GPIO_BIAS_DISABLE flags.
But that's a different discussion.
ChenYu
^ permalink raw reply
* Re: [PATCH 4/4] platform: chrome: cros_ec_ishtp: use helper functions for connection
From: Tzung-Bi Shih @ 2023-12-06 3:33 UTC (permalink / raw)
To: Even Xu
Cc: jikos, srinivas.pandruvada, bleung, groeck, linux-input,
chrome-platform
In-Reply-To: <1701741033-26222-5-git-send-email-even.xu@intel.com>
On Tue, Dec 05, 2023 at 09:50:33AM +0800, Even Xu wrote:
> Use helper functions ishtp_cl_establish_connection() and
> ishtp_cl_destroy_connection() to establish and destroy connection
> respectively. These functions are used during initialization, reset and
> deinitialization flows.
>
> No functional changes are expected.
>
> Signed-off-by: Even Xu <even.xu@intel.com>
> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
One minor suggestion: we usually use "platform/chrome:" instead of
"platform: chrome:" for the title prefix.
^ permalink raw reply
* RE: [PATCH 4/4] platform: chrome: cros_ec_ishtp: use helper functions for connection
From: Xu, Even @ 2023-12-06 3:53 UTC (permalink / raw)
To: Tzung-Bi Shih
Cc: jikos@kernel.org, srinivas.pandruvada@linux.intel.com,
bleung@chromium.org, groeck@chromium.org,
linux-input@vger.kernel.org, chrome-platform@lists.linux.dev
In-Reply-To: <ZW_rdCJ7EdtmJYFz@google.com>
Thanks Tzung-Bi!
Best Regards,
Even Xu
-----Original Message-----
From: Tzung-Bi Shih <tzungbi@kernel.org>
Sent: Wednesday, December 6, 2023 11:33 AM
To: Xu, Even <even.xu@intel.com>
Cc: jikos@kernel.org; srinivas.pandruvada@linux.intel.com; bleung@chromium.org; groeck@chromium.org; linux-input@vger.kernel.org; chrome-platform@lists.linux.dev
Subject: Re: [PATCH 4/4] platform: chrome: cros_ec_ishtp: use helper functions for connection
On Tue, Dec 05, 2023 at 09:50:33AM +0800, Even Xu wrote:
> Use helper functions ishtp_cl_establish_connection() and
> ishtp_cl_destroy_connection() to establish and destroy connection
> respectively. These functions are used during initialization, reset
> and deinitialization flows.
>
> No functional changes are expected.
>
> Signed-off-by: Even Xu <even.xu@intel.com>
> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
One minor suggestion: we usually use "platform/chrome:" instead of
"platform: chrome:" for the title prefix.
^ permalink raw reply
* [PATCH] Input: twl4030-pwrbutton: don't misuse kernel-doc marker
From: Randy Dunlap @ 2023-12-06 5:56 UTC (permalink / raw)
To: linux-kernel; +Cc: Randy Dunlap, Dmitry Torokhov, linux-input
Use a common C comment "/*" instead of "/**" to prevent a warning
from scripts/kernel-doc.
twl4030-pwrbutton.c:33: warning: expecting prototype for twl4030(). Prototype was for PWR_PWRON_IRQ() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
---
drivers/input/misc/twl4030-pwrbutton.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff -- a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -1,4 +1,4 @@
-/**
+/*
* twl4030-pwrbutton.c - TWL4030 Power Button Input Driver
*
* Copyright (C) 2008-2009 Nokia Corporation
^ permalink raw reply
* [PATCH] x86/vmware: Add TDX hypercall support
From: Alexey Makhalov @ 2023-12-06 7:15 UTC (permalink / raw)
To: linux-kernel, virtualization, hpa, dave.hansen, bp, mingo, tglx,
dave.hansen
Cc: x86, netdev, richardcochran, linux-input, dmitry.torokhov, zackr,
linux-graphics-maintainer, pv-drivers, namit, timothym, akaher,
jsipek, dri-devel, daniel, airlied, tzimmermann, mripard,
maarten.lankhorst, horms
In-Reply-To: <ef8d3e17-7028-47fd-ad31-54dadbb6796d@broadcom.com>
From: Alexey Makhalov <amakhalov@vmware.com>
VMware hypercalls use I/O port, VMCALL or VMMCALL instructions.
Add __tdx_hypercall path to support TDX guests.
No change in high bandwidth hypercalls, as only low bandwidth
ones are supported for TDX guests.
Co-developed-by: Tim Merrifield <timothym@vmware.com>
Signed-off-by: Tim Merrifield <timothym@vmware.com>
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Nadav Amit <namit@vmware.com>
---
arch/x86/include/asm/vmware.h | 72 +++++++++++++++++++++++++++++++++++
arch/x86/kernel/cpu/vmware.c | 10 +++++
2 files changed, 82 insertions(+)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 17091eba68cb..cd58ff8ef1af 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -40,6 +40,54 @@
extern u8 vmware_hypercall_mode;
+#define VMWARE_TDX_VENDOR_LEAF 0x1AF7E4909ULL
+#define VMWARE_TDX_HCALL_FUNC 1
+
+extern void vmware_tdx_hypercall_args(struct tdx_module_args *args);
+
+/*
+ * TDCALL[TDG.VP.VMCALL] uses rax (arg0) and rcx (arg2), while the use of
+ * rbp (arg6) is discouraged by the TDX specification. Therefore, we
+ * remap those registers to r12, r13 and r14, respectively.
+ */
+static inline
+unsigned long vmware_tdx_hypercall(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5, uint32_t *out6)
+{
+ struct tdx_module_args args = {
+ .r10 = VMWARE_TDX_VENDOR_LEAF,
+ .r11 = VMWARE_TDX_HCALL_FUNC,
+ .r12 = VMWARE_HYPERVISOR_MAGIC,
+ .r13 = cmd,
+ .rbx = in1,
+ .rdx = in3,
+ .rsi = in4,
+ .rdi = in5,
+ .r14 = in6,
+ };
+
+ vmware_tdx_hypercall_args(&args);
+
+ if (out1)
+ *out1 = args.rbx;
+ if (out2)
+ *out2 = args.r13;
+ if (out3)
+ *out3 = args.rdx;
+ if (out4)
+ *out4 = args.rsi;
+ if (out5)
+ *out5 = args.rdi;
+ if (out6)
+ *out6 = args.r14;
+
+ return args.r12;
+}
+
/*
* The low bandwidth call. The low word of edx is presumed to have OUT bit
* set. The high word of edx may contain input data from the caller.
@@ -67,6 +115,10 @@ unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, NULL, NULL,
+ NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -85,6 +137,10 @@ unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, out1, out2,
+ NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -104,6 +160,10 @@ unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0, 0, out1, out2,
+ out3, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -123,6 +183,10 @@ unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5, 0, NULL,
+ out2, NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -145,6 +209,10 @@ unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, 0, 0, 0, NULL, out2,
+ out3, out4, out5, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
"=D" (*out5)
@@ -166,6 +234,10 @@ unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5, 0, out1,
+ out2, out3, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 3aa1adaed18f..29a31d4eaa27 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -428,6 +428,16 @@ static bool __init vmware_legacy_x2apic_available(void)
(eax & BIT(VCPU_LEGACY_X2APIC));
}
+#ifdef CONFIG_INTEL_TDX_GUEST
+/* Export tdx hypercall and allow it only for VMware guests. */
+void vmware_tdx_hypercall_args(struct tdx_module_args *args)
+{
+ if (hypervisor_is_type(X86_HYPER_VMWARE))
+ __tdx_hypercall(args);
+}
+EXPORT_SYMBOL_GPL(vmware_tdx_hypercall_args);
+#endif
+
#ifdef CONFIG_AMD_MEM_ENCRYPT
static void vmware_sev_es_hcall_prepare(struct ghcb *ghcb,
struct pt_regs *regs)
--
2.39.0
^ permalink raw reply related
* Re: [PATCH] HID: wacom: Remove AES power_supply after extended inactivity
From: Benjamin Tissoires @ 2023-12-06 8:31 UTC (permalink / raw)
To: linux-input, Benjamin Tissoires, Jiri Kosina, Tatsunosuke Tobita
Cc: Ping Cheng, Jason Gerecke, Aaron Armstrong Skomra, Joshua Dickens,
Tatsunosuke Tobita, Jason Gerecke, Aaron Skomra, Josh Dickens
In-Reply-To: <20231114235729.6867-1-tatsunosuke.wacom@gmail.com>
On Wed, 15 Nov 2023 08:57:29 +0900, Tatsunosuke Tobita wrote:
> Even if a user does not use their AES pen for an extended period,
> the battery power supply attributes continue to exist.
> This results in the desktop showing battery status for a pen
> that is no longer in use and which may in fact be in a different
> state (e.g. the user may be charging the pen).
> To avoid confusion and ensure userspace has an accurate view
> of the battery state, this patch automatically removes
> the power_supply after 30 minutes of inactivity.
>
> [...]
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git (for-6.8/wacom), thanks!
[1/1] HID: wacom: Remove AES power_supply after extended inactivity
https://git.kernel.org/hid/hid/c/fd2a9b29dc9c
Cheers,
--
Benjamin Tissoires <bentiss@kernel.org>
^ permalink raw reply
* Re: [PATCH] HID: wacom: Remove AES power_supply after extended inactivity
From: Benjamin Tissoires @ 2023-12-06 8:34 UTC (permalink / raw)
To: Benjamin Tissoires
Cc: linux-input, Jiri Kosina, Tatsunosuke Tobita, Ping Cheng,
Jason Gerecke, Aaron Armstrong Skomra, Joshua Dickens,
Tatsunosuke Tobita, Jason Gerecke, Aaron Skomra, Josh Dickens
In-Reply-To: <170185151858.57786.7346117978758271248.b4-ty@kernel.org>
On Wed, Dec 6, 2023 at 9:32 AM Benjamin Tissoires <bentiss@kernel.org> wrote:
>
> On Wed, 15 Nov 2023 08:57:29 +0900, Tatsunosuke Tobita wrote:
> > Even if a user does not use their AES pen for an extended period,
> > the battery power supply attributes continue to exist.
> > This results in the desktop showing battery status for a pen
> > that is no longer in use and which may in fact be in a different
> > state (e.g. the user may be charging the pen).
> > To avoid confusion and ensure userspace has an accurate view
> > of the battery state, this patch automatically removes
> > the power_supply after 30 minutes of inactivity.
> >
> > [...]
>
> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git (for-6.8/wacom), thanks!
>
> [1/1] HID: wacom: Remove AES power_supply after extended inactivity
> https://git.kernel.org/hid/hid/c/fd2a9b29dc9c
FWIW, I have applied the changes, but please fix your workflow.
checkpatch complains about:
```
WARNING: From:/Signed-off-by: email address mismatch:
'From: Tatsunosuke Tobita <tatsunosuke.wacom@gmail.com>' !=
'Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>'
```
It should be a matter of configuring your git client or remember to
add the correct "from" line on top of your patch.
Cheers,
Benjamin
>
> Cheers,
> --
> Benjamin Tissoires <bentiss@kernel.org>
>
^ permalink raw reply
* RE: [PATCH v2 03/11] dt-bindings: input: Convert da906{1,2,3} onkey to json-schema
From: Biju Das @ 2023-12-06 9:39 UTC (permalink / raw)
To: kernel test robot, Dmitry Torokhov, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: oe-kbuild-all@lists.linux.dev, Support Opensource,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
Geert Uytterhoeven, Prabhakar Mahadev Lad,
linux-renesas-soc@vger.kernel.org
In-Reply-To: <202312060431.fHDo1Yk9-lkp@intel.com>
Hi kernel test robot,
> -----Original Message-----
> From: kernel test robot <lkp@intel.com>
> Sent: Tuesday, December 5, 2023 8:19 PM
> Subject: Re: [PATCH v2 03/11] dt-bindings: input: Convert da906{1,2,3}
> onkey to json-schema
>
> Hi Biju,
>
> kernel test robot noticed the following build warnings:
>
> [auto build test WARNING on lee-mfd/for-mfd-next] [also build test WARNING
]
>
> url:
> base:
> patch link:
> reproduce:
>
> If you fix the issue in a separate patch/commit (i.e. not just a new
> version of the same patch/commit), kindly add following tags
> | Reported-by: kernel test robot <lkp@intel.com>
> | Closes:
> |
>
> All warnings (new ones prefixed by >>):
>
> >> Warning: MAINTAINERS references a file that doesn't exist:
> >> Documentation/devicetree/bindings/input/da90??-onkey.txt
There is an updated patch series available[1] and Please retest and provide feedback if any?
[1] https://lore.kernel.org/all/20231204172510.35041-1-biju.das.jz@bp.renesas.com/
Cheers,
Biju
^ permalink raw reply
* Re: [RFC PATCH v3 4/5] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
From: AngeloGioacchino Del Regno @ 2023-12-06 10:02 UTC (permalink / raw)
To: Chen-Yu Tsai
Cc: Doug Anderson, Rob Herring, Frank Rowand, Krzysztof Kozlowski,
Conor Dooley, Matthias Brugger, Wolfram Sang, Benson Leung,
Tzung-Bi Shih, chrome-platform, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel, Johan Hovold, Hsin-Yi Wang,
Dmitry Torokhov, andriy.shevchenko, Jiri Kosina, linus.walleij,
broonie, gregkh, hdegoede, james.clark, james, keescook, rafael,
tglx, Jeff LaBundy, linux-input, linux-i2c
In-Reply-To: <CAGXv+5G5fFTv8zn=YamSdccjuYemE5oKBqjb8CSyGzu9aMJ0eg@mail.gmail.com>
Il 06/12/23 03:55, Chen-Yu Tsai ha scritto:
> On Tue, Dec 5, 2023 at 6:22 PM AngeloGioacchino Del Regno
> <angelogioacchino.delregno@collabora.com> wrote:
>>
>> Il 04/12/23 17:50, Doug Anderson ha scritto:
>>> Hi,
>>>
>>> On Sun, Dec 3, 2023 at 10:59 PM Chen-Yu Tsai <wenst@chromium.org> wrote:
>>>>
>>>> On Sat, Dec 2, 2023 at 8:58 AM Doug Anderson <dianders@chromium.org> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> On Tue, Nov 28, 2023 at 12:45 AM Chen-Yu Tsai <wenst@chromium.org> wrote:
>>>>>>
>>>>>> @@ -44,6 +46,7 @@ trackpad2: trackpad@2c {
>>>>>> reg = <0x2c>;
>>>>>> hid-descr-addr = <0x0020>;
>>>>>> wakeup-source;
>>>>>> + status = "fail-needs-probe";
>>>>>
>>>>> While doing this, you could also remove the hack where the trackpad
>>>>> IRQ pinctrl is listed under i2c4.
>>>>
>>>> Sure. I do think we can do away with it though. According to at least one
>>>> schematic, the interrupt line has pull-ups on both sides of the voltage
>>>> shifter.
>>>>
>>>> BTW, The touchscreen doesn't have pinctrl entries. This has pull-ups on
>>>> both sides of the voltage shifter as well.
>>>
>>> I dunno if the convention is different on Mediatek boards, but at
>>> least on boards I've been involved with in the past we've always put
>>> pinctrl entries just to make things explicit. This meant that we
>>> didn't rely on the firmware/bootrom/defaults to leave pulls in any
>>> particular state. ...otherwise those external pull-ups could be
>>> fighting with internal pull-downs, right?
>>>
>>
>> MediaTek boards aren't special and there's no good reason for those to rely on
>> firmware/bootrom/defaults - so there is no good reason to avoid declaring any
>> relevant pinctrl entry.
>
> I think this should be migrated to use the proper GPIO bindings: the
> GPIO_PULL_UP / GPIO_PULL_DOWN / GPIO_BIAS_DISABLE flags.
>
> But that's a different discussion.
>
100% agreed.
Cheers,
Angelo
^ permalink raw reply
* Re: [PATCH 4/4] platform: chrome: cros_ec_ishtp: use helper functions for connection
From: Jiri Kosina @ 2023-12-06 10:34 UTC (permalink / raw)
To: Tzung-Bi Shih
Cc: Even Xu, srinivas.pandruvada, bleung, groeck, linux-input,
chrome-platform
In-Reply-To: <ZW_rdCJ7EdtmJYFz@google.com>
On Wed, 6 Dec 2023, Tzung-Bi Shih wrote:
> On Tue, Dec 05, 2023 at 09:50:33AM +0800, Even Xu wrote:
> > Use helper functions ishtp_cl_establish_connection() and
> > ishtp_cl_destroy_connection() to establish and destroy connection
> > respectively. These functions are used during initialization, reset and
> > deinitialization flows.
> >
> > No functional changes are expected.
> >
> > Signed-off-by: Even Xu <even.xu@intel.com>
> > Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
>
> Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Thanks.
> One minor suggestion: we usually use "platform/chrome:" instead of
> "platform: chrome:" for the title prefix.
I have changed that, and am taking it together with the rest of the series
through hid.git#for-6.8/intel-ish.
--
Jiri Kosina
SUSE Labs
^ permalink raw reply
* [PATCH v2 0/2] Add HX83102j driver for HIMAX HID touchscreen
From: Allen_Lin @ 2023-12-06 10:35 UTC (permalink / raw)
To: dmitry.torokhov, robh+dt, krzysztof.kozlowski+dt, conor+dt, jikos,
benjamin.tissoires, linux-input, devicetree, linux-kernel
Cc: Allen_Lin
Hi,
This driver implements for HIMAX HID touchscreen HX8310XX series.
Using SPI interface to acquire HID packets from driver.
Patchs notes as below
1. Add the Maintainer and devicetree bindings document for driver
2. Add the driver code and modify Kconfig/Makefiles to support the driver
change in v2 :
- Fix kernel test robot build warnings.
Thanks.
Allen_Lin (2):
dt-bindings: input: Add Himax HX83102J touchscreen
Input: Add Himax HX83102J touchscreen driver
.../bindings/input/himax,hx8310xx.yaml | 70 +
MAINTAINERS | 8 +
drivers/hid/Kconfig | 9 +-
drivers/hid/Makefile | 2 +-
drivers/hid/hid-himax-83102j.c | 3175 +++++++++++++++++
drivers/hid/hid-himax-83102j.h | 923 +++++
6 files changed, 4185 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/himax,hx8310xx.yaml
create mode 100644 drivers/hid/hid-himax-83102j.c
create mode 100644 drivers/hid/hid-himax-83102j.h
--
2.34.1
^ permalink raw reply
* [PATCH v2 1/2] dt-bindings: input: Add Himax HX83102J touchscreen
From: Allen_Lin @ 2023-12-06 10:35 UTC (permalink / raw)
To: dmitry.torokhov, robh+dt, krzysztof.kozlowski+dt, conor+dt, jikos,
benjamin.tissoires, linux-input, devicetree, linux-kernel
Cc: Allen_Lin
In-Reply-To: <20231206103546.808680-1-allencl_lin@hotmail.com>
Add the HX83102j touchscreen device tree bindings documents.
Signed-off-by: Allen_Lin <allencl_lin@hotmail.com>
---
.../bindings/input/himax,hx8310xx.yaml | 70 +++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 76 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/himax,hx8310xx.yaml
diff --git a/Documentation/devicetree/bindings/input/himax,hx8310xx.yaml b/Documentation/devicetree/bindings/input/himax,hx8310xx.yaml
new file mode 100644
index 000000000000..1cc65e9bd267
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/himax,hx8310xx.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/himax,hx8310xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: himax hx8310xx touchscreen
+
+maintainers:
+ - Allen Lin <allencl_lin@hotmail.com>
+
+description:
+ Supports the himax hx8310xx touchscreen.
+ This touchscreen uses the spi-hid protocol but has some non-standard
+ power sequencing required.
+
+allOf:
+ - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - himax,hx83102j
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ spi-max-frequency: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hid_himax_spi@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_int0 &touch_reset>;
+ reg = <0>;
+ spi-max-frequency = <12500000>;
+ status = "okay";
+ compatible = "himax,hx83102j";
+ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ spi-cpha;
+ spi-cpol;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 012df8ccf34e..cadcbf7294a6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9502,6 +9502,12 @@ L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/misc/hisi_hikey_usb.c
+HIMAX HID HX83102J TOUCHSCREEN
+M: Allen Lin <allencl_lin@hotmail.com>
+L: linux-input@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/input/himax,hx8310xx.yaml
+
HIMAX HX83112B TOUCHSCREEN SUPPORT
M: Job Noorman <job@noorman.info>
L: linux-input@vger.kernel.org
--
2.34.1
^ permalink raw reply related
* [PATCH v2 2/2] Input: Add Himax HX83102J touchscreen driver
From: Allen_Lin @ 2023-12-06 10:35 UTC (permalink / raw)
To: dmitry.torokhov, robh+dt, krzysztof.kozlowski+dt, conor+dt, jikos,
benjamin.tissoires, linux-input, devicetree, linux-kernel
Cc: Allen_Lin
In-Reply-To: <20231206103546.808680-1-allencl_lin@hotmail.com>
Add a new driver for Himax touchscreen series touchscreen controllers.
This driver supports Himax IC using the SPI interface to
acquire HID packets.
Signed-off-by: Allen_Lin <allencl_lin@hotmail.com>
---
v1 -> v2: Fix kernel test robot build warnings
Signed-off-by: Allen_Lin <allencl_lin@hotmail.com>
---
MAINTAINERS | 2 +
drivers/hid/Kconfig | 9 +-
drivers/hid/Makefile | 2 +-
drivers/hid/hid-himax-83102j.c | 3175 ++++++++++++++++++++++++++++++++
drivers/hid/hid-himax-83102j.h | 923 ++++++++++
5 files changed, 4109 insertions(+), 2 deletions(-)
create mode 100644 drivers/hid/hid-himax-83102j.c
create mode 100644 drivers/hid/hid-himax-83102j.h
diff --git a/MAINTAINERS b/MAINTAINERS
index cadcbf7294a6..d0d5ab7ea1e6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9507,6 +9507,8 @@ M: Allen Lin <allencl_lin@hotmail.com>
L: linux-input@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/input/himax,hx8310xx.yaml
+F: drivers/hid/hid-himax-83102j.c
+F: drivers/hid/hid-himax-83102j.h
HIMAX HX83112B TOUCHSCREEN SUPPORT
M: Job Noorman <job@noorman.info>
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 4ce74af79657..896af236c1f8 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1324,7 +1324,14 @@ config HID_KUNIT_TEST
Documentation/dev-tools/kunit/.
If in doubt, say "N".
-
+config HID_HIMAX
+ tristate "Himax touchpanel CHIPSET"
+ depends on HID
+ help
+ Say Y here if you have a Himax CHIPSET touchscreen.
+ HIMAX controllers are multi touch controllers which can
+ report 10 touches at a time.
+ If unsure, say N.
endmenu
source "drivers/hid/bpf/Kconfig"
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 8a06d0f840bc..a0f0fc3261e0 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -156,7 +156,7 @@ hid-uclogic-test-objs := hid-uclogic-rdesc.o \
hid-uclogic-params.o \
hid-uclogic-rdesc-test.o
obj-$(CONFIG_HID_KUNIT_TEST) += hid-uclogic-test.o
-
+obj-$(CONFIG_HID_HIMAX) += hid-himax-83102j.o
obj-$(CONFIG_USB_HID) += usbhid/
obj-$(CONFIG_USB_MOUSE) += usbhid/
obj-$(CONFIG_USB_KBD) += usbhid/
diff --git a/drivers/hid/hid-himax-83102j.c b/drivers/hid/hid-himax-83102j.c
new file mode 100644
index 000000000000..bc7dc0675ec0
--- /dev/null
+++ b/drivers/hid/hid-himax-83102j.c
@@ -0,0 +1,3175 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Himax Driver Code for HX83102J to simulate HID
+ *
+ * Copyright (C) 2023 Himax Corporation.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "hid-himax-83102j.h"
+
+struct himax_ts_data *g_himax_ts;
+struct himax_core_fp g_core_fp;
+
+#define FW_EXT_NAME(FWNAME) FWNAME ".bin"
+char *g_fw_boot_upgrade_name = FW_EXT_NAME(BOOT_UPGRADE_FWNAME);
+struct himax_core_command_regs g_core_regs;
+
+
+union host_ext_rd_t g_host_ext_rd = {
+ .host_report_descriptor = {
+ 0x06, 0x00, 0xFF,// Usage Page (Vendor-defined)
+ 0x09, 0x01,// Usage (0x1)
+ 0xA1, 0x01,// Collection (Application)
+ 0x75, 0x08,// Report Size (8)
+ 0x15, 0x00,// Logical Minimum (0)
+ 0x26, 0xFF, 0x00,// Logical Maximum (255)
+ 0x85, 0x05,// Report ID (5)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0xFF, 0x00,// Report Count (255)
+ 0xB1, 0x02,// Feature (ID: 5, sz: 2040 bits(255 bytes))
+ 0x85, 0x06,// Report ID (6)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, (HID_REG_SZ_MAX & 0xFF), (HID_REG_SZ_MAX >> 8),
+ 0xB1, 0x02,// Feature (ID: 6, sz: 72 bits(9 bytes))
+ 0x85, 0x07,// Report ID (7)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x04, 0x00,// Report Count (4)
+ 0xB1, 0x02,// Feature (ID: 7, sz: 32 bits(4 bytes))
+ 0x85, 0x08,// Report ID (8)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x8D, 0x13,// Report Count (5005)
+ 0xB1, 0x02,// Feature (ID: 8, sz: 40040 bits(5005 bytes))
+ // 0x85, 0x09,// Report ID (9)
+ // 0x09, 0x02,// Usage (0x2)
+ // 0x96, 0x4F, 0x03,// Report Count (847)
+ // 0xB1, 0x02,// Feature (ID: 9, sz: 6776 bits(847 bytes))
+ 0x85, 0x0A,// Report ID (10)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x00, 0x04,// Report Count (1024)
+ 0x91, 0x02,// Output (ID: 10, sz: 8192 bits(1024 bytes))
+ 0x85, 0x0B,// Report ID (11)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x01, 0x00,// Report Count (1)
+ 0xB1, 0x02,// Feature (ID: 11, sz: 8 bits(1 bytes))
+ 0x85, 0x0C,// Report ID (12)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x01, 0x00,// Report Count (1)
+ 0xB1, 0x02,// Feature (ID: 12, sz: 8 bits(1 bytes))
+ 0x85, 0x31,// Report ID (49)
+ 0x09, 0x02,// Usage (0x2)
+ 0x96, 0x01, 0x00,// Report Count (1)
+ 0xB1, 0x02,// Feature (ID: 49, sz: 8 bits(1 bytes))
+ 0xC0,// End Collection
+ },
+};
+
+const unsigned int host_ext_report_desc_sz =
+ sizeof(g_host_ext_rd.host_report_descriptor);
+
+union heatmap_rd_t g_heatmap_rd = {
+ .host_report_descriptor = {
+ 0x05, 0x0D,// Usage Page (Digitizers)
+ 0x09, 0x0F,// Usage (0xF)
+ 0xA1, 0x01,// Collection (Application)
+ 0x85, 0x61,// Report ID (97)
+ 0x05, 0x0D,// Usage Page (Digitizers)
+ 0x15, 0x00,// Logical Minimum (0)
+ 0x27, 0xFF, 0xFF, 0x00, 0x00,// Logical Maximum (65535)
+ 0x75, 0x10,// Report Size (16)
+ 0x95, 0x01,// Report Count (1)
+ 0x09, 0x6A,// Usage (0x6A)
+ 0x81, 0x02,// Input (ID: 97, sz: 16 bits(2 bytes))
+ 0x09, 0x6B,// Usage (0x6B)
+ 0x81, 0x02,// Input (ID: 97, sz: 16 bits(2 bytes))
+ 0x27, 0xFF, 0xFF, 0xFF, 0xFF,// Logical Maximum (-1)
+ 0x75, 0x20,// Report Size (32)
+ 0x09, 0x56,// Usage (0x56)
+ 0x81, 0x02,// Input (ID: 97, sz: 32 bits(4 bytes))
+ 0x05, 0x01,// Usage Page (Generic Desktop)
+ 0x09, 0x3B,// Usage (0x3B)
+ 0x81, 0x02,// Input (ID: 97, sz: 32 bits(4 bytes))
+ 0x05, 0x0D,// Usage Page (Digitizers)
+ 0x26, 0xFF, 0x00,// Logical Maximum (255)
+ 0x09, 0x6C,// Usage (0x6C)
+ 0x75, 0x08,// Report Size (8)
+ 0x96, 0x00, 0x0C,// Report Count (3072)
+ 0x81, 0x02,// Input (ID: 97, sz: 24576 bits(3072 bytes))
+ 0xC0,// End Collection
+ },
+};
+
+const unsigned int host_heatmap_report_desc_sz =
+ sizeof(g_heatmap_rd.host_report_descriptor);
+
+void himax_rst_gpio_set(int pinnum, u8 value)
+{
+ gpio_direction_output(pinnum, value);
+}
+
+static int himax_gpio_power_config(struct himax_ts_data *ts,
+ struct himax_platform_data *pdata)
+{
+ int error = 0;
+
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ error = gpio_request(pdata->gpio_reset, "himax-reset");
+
+ if (error < 0) {
+ E("request reset pin failed");
+ goto err_gpio_reset_req;
+ }
+
+ error = gpio_direction_output(pdata->gpio_reset, 0);
+
+ if (error) {
+ E("unable to set direction for gpio [%d]",
+ pdata->gpio_reset);
+ goto err_gpio_reset_dir;
+ }
+ }
+
+ if (pdata->vccd_supply) {
+ error = regulator_enable(pdata->vccd_supply);
+ if (error) {
+ E("unable to enable vccd supply");
+ goto err_vccd_supply_enable;
+ }
+ }
+
+ if (pdata->vcca_supply) {
+ error = regulator_enable(pdata->vcca_supply);
+ if (error) {
+ E("unable to enable vcca supply");
+ goto err_vcca_supply_enable;
+ }
+ }
+
+ if (gpio_is_valid(pdata->gpio_irq)) {
+ /* configure touchscreen irq gpio */
+ error = gpio_request(pdata->gpio_irq, "himax_gpio_irq");
+
+ if (error) {
+ E("unable to request gpio [%d]", pdata->gpio_irq);
+ goto err_gpio_irq_req;
+ }
+
+ error = gpio_direction_input(pdata->gpio_irq);
+ if (error) {
+ E("unable to set direction for gpio [%d]",
+ pdata->gpio_irq);
+ goto err_gpio_irq_set_input;
+ }
+
+ ts->hx_irq = gpio_to_irq(pdata->gpio_irq);
+ } else if (pdata->of_irq) {
+ ts->hx_irq = pdata->of_irq;
+ } else {
+ E("irq not provided");
+ goto err_gpio_irq_req;
+ }
+
+ usleep_range(2000, 2001);
+
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ error = gpio_direction_output(pdata->gpio_reset, 1);
+
+ if (error) {
+ E("unable to set direction for gpio [%d]",
+ pdata->gpio_reset);
+ goto err_gpio_reset_set_high;
+ }
+ }
+
+ return error;
+
+err_gpio_reset_set_high:
+err_gpio_irq_set_input:
+ if (gpio_is_valid(pdata->gpio_irq))
+ gpio_free(pdata->gpio_irq);
+err_gpio_irq_req:
+ if (pdata->vcca_supply) {
+ regulator_disable(pdata->vcca_supply);
+ regulator_put(pdata->vcca_supply);
+ pdata->vcca_supply = NULL;
+ }
+err_vcca_supply_enable:
+ if (pdata->vccd_supply) {
+ regulator_disable(pdata->vccd_supply);
+ regulator_put(pdata->vccd_supply);
+ pdata->vccd_supply = NULL;
+ }
+err_vccd_supply_enable:
+err_gpio_reset_dir:
+ if (gpio_is_valid(pdata->gpio_reset))
+ gpio_free(pdata->gpio_reset);
+err_gpio_reset_req:
+
+ return error;
+}
+
+static void himax_gpio_power_deconfig(struct himax_platform_data *pdata)
+{
+ if (gpio_is_valid(pdata->gpio_irq)) {
+ I("free gpio_irq = %d", pdata->gpio_irq);
+ gpio_free(pdata->gpio_irq);
+ }
+
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ I("free gpio_reset = %d", pdata->gpio_reset);
+ gpio_free(pdata->gpio_reset);
+ }
+
+ if (pdata->vcca_supply) {
+ regulator_disable(pdata->vcca_supply);
+ regulator_put(pdata->vcca_supply);
+ pdata->vcca_supply = NULL;
+ }
+ if (pdata->vccd_supply) {
+ regulator_disable(pdata->vccd_supply);
+ regulator_put(pdata->vccd_supply);
+ pdata->vccd_supply = NULL;
+ }
+}
+
+static int himax_spi_read(struct himax_ts_data *ts, u8 *cmd,
+ u8 cmd_len, u8 *buf, u32 len)
+{
+ struct spi_message m;
+ int result = NO_ERR;
+ int retry;
+ int error;
+ struct spi_transfer t = {
+ .len = cmd_len + len,
+ };
+
+ t.tx_buf = ts->xfer_data;
+ t.rx_buf = ts->xfer_data;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+
+ for (retry = 0; retry < HIMAX_BUS_RETRY_TIMES; retry++) {
+ error = spi_sync(ts->spi, &m);
+ if (unlikely(error))
+ E("SPI read error: %d", error);
+ else
+ break;
+ }
+
+ if (retry == HIMAX_BUS_RETRY_TIMES) {
+ E("SPI read error retry over %d", HIMAX_BUS_RETRY_TIMES);
+ result = -EIO;
+ goto END;
+ } else {
+ memcpy(buf, ts->xfer_data + cmd_len, len);
+ }
+
+END:
+ return result;
+}
+
+static int himax_spi_write(struct himax_ts_data *ts, u8 *buf,
+ u32 length)
+{
+ int status;
+ struct spi_message m;
+ struct spi_transfer t = {
+ .tx_buf = buf,
+ .len = length,
+ };
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+
+ status = spi_sync(ts->spi, &m);
+
+ if (status == 0) {
+ status = m.status;
+ if (status == 0)
+ status = m.actual_length;
+ }
+
+ return status;
+}
+
+int himax_bus_read(struct himax_ts_data *ts, u8 cmd,
+ u8 *buf, u32 len)
+{
+ int result = -1;
+ u8 hw_addr = 0x00;
+
+ if (len > BUS_R_DLEN) {
+ E("len[%d] is over %d", len, BUS_R_DLEN);
+ return result;
+ }
+
+ mutex_lock(&ts->rw_lock);
+
+ if (ts->select_slave_reg) {
+ hw_addr = ts->slave_read_reg;
+ I("now addr=0x%02X!", hw_addr);
+ } else {
+ hw_addr = 0xF3;
+ }
+
+ memset(ts->xfer_data, 0, BUS_R_HLEN + len);
+ ts->xfer_data[0] = hw_addr;
+ ts->xfer_data[1] = cmd;
+ ts->xfer_data[2] = 0x00;
+ result = himax_spi_read(ts, ts->xfer_data, BUS_R_HLEN, buf, len);
+
+ mutex_unlock(&ts->rw_lock);
+
+ return result;
+}
+
+int himax_bus_write(struct himax_ts_data *ts, u8 cmd,
+ u8 *addr, u8 *data, u32 len)
+{
+ int result = -1;
+ u8 offset = 0;
+ u32 tmp_len = len;
+ u8 hw_addr = 0x00;
+
+ if (len > BUS_W_DLEN) {
+ E("len[%d] is over %d", len, BUS_W_DLEN);
+ return -EFAULT;
+ }
+
+ mutex_lock(&ts->rw_lock);
+
+ if (ts->select_slave_reg) {
+ hw_addr = ts->slave_write_reg;
+ I("now addr=0x%02X!", hw_addr);
+ } else {
+ hw_addr = 0xF2;
+ }
+
+ ts->xfer_data[0] = hw_addr;
+ ts->xfer_data[1] = cmd;
+ offset = BUS_W_HLEN;
+
+ if (addr) {
+ memcpy(ts->xfer_data + offset, addr, 4);
+ offset += 4;
+ tmp_len -= 4;
+ }
+
+ if (data)
+ memcpy(ts->xfer_data + offset, data, tmp_len);
+
+ result = himax_spi_write(ts, ts->xfer_data, len + BUS_W_HLEN);
+
+ mutex_unlock(&ts->rw_lock);
+
+ return result;
+}
+
+void himax_int_enable(struct himax_ts_data *ts, int enable)
+{
+ unsigned long irqflags = 0;
+ int irqnum = ts->hx_irq;
+
+ spin_lock_irqsave(&ts->irq_lock, irqflags);
+ D("Entering! irqnum = %d", irqnum);
+ if (enable == 1 && atomic_read(&ts->irq_state) == 0) {
+ atomic_set(&ts->irq_state, 1);
+ enable_irq(irqnum);
+ ts->irq_enabled = 1;
+ } else if (enable == 0 && atomic_read(&ts->irq_state) == 1) {
+ atomic_set(&ts->irq_state, 0);
+ disable_irq_nosync(irqnum);
+ ts->irq_enabled = 0;
+ }
+
+ I("interrupt enable = %d", enable);
+ spin_unlock_irqrestore(&ts->irq_lock, irqflags);
+}
+
+static void himax_ts_isr_func(struct himax_ts_data *ts)
+{
+ himax_ts_work(ts);
+}
+
+static irqreturn_t himax_ts_thread(int irq, void *ptr)
+{
+ himax_ts_isr_func((struct himax_ts_data *)ptr);
+
+ return IRQ_HANDLED;
+}
+
+static void himax_ts_work_func(struct work_struct *work)
+{
+ struct himax_ts_data *ts = container_of(work,
+ struct himax_ts_data, work);
+
+ himax_ts_work(ts);
+}
+
+static int himax_int_register_trigger(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ if (ts->ic_data->HX_INT_IS_EDGE) {
+ I("edge triiger falling");
+ ret = request_threaded_irq(ts->hx_irq, NULL, himax_ts_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ himax_dev_name, ts);
+ } else {
+ I("level trigger low");
+ ret = request_threaded_irq(ts->hx_irq, NULL, himax_ts_thread,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT, himax_dev_name, ts);
+ }
+
+ return ret;
+}
+
+static int himax_ts_register_interrupt(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ ts->irq_enabled = 0;
+
+ /* Work functon */
+ if (ts->hx_irq) {/*INT mode*/
+ ts->use_irq = 1;
+ ret = himax_int_register_trigger(ts);
+
+ if (ret == 0) {
+ ts->irq_enabled = 1;
+ atomic_set(&ts->irq_state, 1);
+ I("irq enabled at number: %d",
+ ts->hx_irq);
+ } else {
+ ts->use_irq = 0;
+ E("request_irq failed");
+ }
+ } else {
+ I("ts->hx_irq is empty, use polling mode.");
+ }
+
+ /*if use polling mode need to disable HX_ESD_RECOVERY function*/
+ if (!ts->use_irq) {
+ ts->himax_wq = create_singlethread_workqueue("himax_touch");
+ INIT_WORK(&ts->work, himax_ts_work_func);
+ hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ ts->timer.function = himax_ts_timer_func;
+ hrtimer_start(&ts->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
+ I("polling mode enabled");
+ }
+
+ return ret;
+}
+
+static int himax_ts_unregister_interrupt(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ I("entered.");
+
+ /* Work functon */
+ if (ts->hx_irq && ts->use_irq) {/*INT mode*/
+ free_irq(ts->hx_irq, ts);
+ I("irq disabled at qpio: %d",
+ ts->hx_irq);
+ }
+
+ /*if use polling mode need to disable HX_ESD_RECOVERY function*/
+ if (!ts->use_irq) {
+ hrtimer_cancel(&ts->timer);
+ cancel_work_sync(&ts->work);
+ if (ts->himax_wq)
+ destroy_workqueue(ts->himax_wq);
+ I("polling mode destroyed");
+ }
+
+ return ret;
+}
+
+#if defined(CONFIG_FB)
+static int fb_notifier_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ const struct fb_event *evdata = data;
+ int *blank;
+ struct himax_ts_data *ts =
+ container_of(self, struct himax_ts_data, fb_notif);
+
+ I("entered");
+
+ if (!ts) {
+ E("ts is NULL");
+ return -ECANCELED;
+ }
+
+ if (!ts->ic_boot_done) {
+ E("IC is booting");
+ return -ECANCELED;
+ }
+
+ if (evdata && evdata->data &&
+ event == FB_EVENT_BLANK &&
+ ts->dev) {
+ blank = evdata->data;
+
+ switch (*blank) {
+ case FB_BLANK_UNBLANK:
+ himax_resume(ts->dev);
+ break;
+
+ case FB_BLANK_POWERDOWN:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ himax_suspend(ts->dev);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static void himax_fb_register(struct work_struct *work)
+{
+ int ret = 0;
+ struct himax_ts_data *ts = container_of(work, struct himax_ts_data,
+ work_att.work);
+
+ ts->fb_notif.notifier_call = fb_notifier_callback;
+ ret = fb_register_client(&ts->fb_notif);
+
+ if (ret)
+ E("Unable to register fb_notifier: %d", ret);
+}
+#endif
+
+static void hx_check_power_status(struct work_struct *work)
+{
+ struct himax_ts_data *ts = container_of(work, struct himax_ts_data,
+ work_pwr.work);
+
+ ts->latest_power_status = power_supply_is_system_supplied();
+
+ I("Update ts->latest_power_status = %X", ts->latest_power_status);
+
+ himax_cable_detect_func(ts, true);
+}
+
+static int pwr_notifier_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ struct himax_ts_data *ts = container_of(self, struct himax_ts_data,
+ power_notif);
+ I("entered. event = %lX", event);
+
+ cancel_delayed_work_sync(&ts->work_pwr);
+ queue_delayed_work(ts->himax_pwr_wq, &ts->work_pwr,
+ msecs_to_jiffies(1100));
+
+ return 0;
+}
+
+static void himax_pwr_register(struct work_struct *work)
+{
+ int ret = 0;
+ struct himax_ts_data *ts = container_of(work, struct himax_ts_data,
+ work_pwr.work);
+
+ ts->power_notif.notifier_call = pwr_notifier_callback;
+ ret = power_supply_reg_notifier(&ts->power_notif);
+ if (ret) {
+ E("Unable to register power_notif: %d", ret);
+ } else {
+ INIT_DELAYED_WORK(&ts->work_pwr, hx_check_power_status);
+ queue_delayed_work(ts->himax_pwr_wq, &ts->work_pwr,
+ msecs_to_jiffies(3000));
+ }
+}
+
+
+/* COMMON*/
+/* CORE_IC */
+/* IC side start*/
+static void himax_mcu_burst_enable(struct himax_ts_data *ts,
+ u8 auto_add_4_byte)
+{
+ u8 tmp_data[DATA_LEN_4];
+ int ret;
+
+ /*I("Entering");*/
+ tmp_data[0] = IC_GET_VAL(data_conti);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_conti), NULL, tmp_data, 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ return;
+ }
+
+ tmp_data[0] = (IC_GET_VAL(data_incr4) | auto_add_4_byte);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_incr4), NULL, tmp_data, 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ return;
+ }
+}
+
+static int himax_mcu_register_read(struct himax_ts_data *ts, u8 *addr,
+ u8 *buf, u32 len)
+{
+ int ret = -1;
+ u32 orig_addr = le32_to_cpup((__le32 *)addr);
+
+ mutex_lock(&ts->reg_lock);
+
+ if (orig_addr == flash_addr_spi200_data)
+ g_core_fp.fp_burst_enable(ts, 0);
+ else if (len > DATA_LEN_4)
+ g_core_fp.fp_burst_enable(ts, 1);
+ else
+ g_core_fp.fp_burst_enable(ts, 0);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_ahb_addr_byte_0), addr, NULL, 4);
+ if (ret < 0) {
+ E("bus access fail!");
+ mutex_unlock(&ts->reg_lock);
+ return BUS_FAIL;
+ }
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_ahb_access_direction), NULL,
+ IC_GET_ARRAY(data_ahb_access_direction_read), 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ mutex_unlock(&ts->reg_lock);
+ return BUS_FAIL;
+ }
+
+ ret = himax_bus_read(ts, IC_GET_VAL(addr_ahb_rdata_byte_0), buf, len);
+ if (ret < 0) {
+ E("bus access fail!");
+ mutex_unlock(&ts->reg_lock);
+ return BUS_FAIL;
+ }
+
+ mutex_unlock(&ts->reg_lock);
+
+ return NO_ERR;
+}
+
+static int himax_mcu_reg_read(struct himax_ts_data *ts, struct hx_reg_t *addr,
+ struct data_pack_t *data)
+{
+ return g_core_fp.fp_register_read(ts,
+ addr->data.byte, data->data.byte, data->len);
+}
+
+static int himax_mcu_register_write(struct himax_ts_data *ts, u8 *addr,
+ u8 *val, u32 len)
+{
+ int ret = -1;
+ const u32 max_trans_sz = 4 * 1024;
+ int i = 0;
+ u32 orig_addr = 0;
+ union hx_dword_data_t temp_addr = {0};
+ u32 temp_len = 0;
+
+ mutex_lock(&ts->reg_lock);
+ orig_addr = le32_to_cpup((__le32 *)addr);
+ if (orig_addr == flash_addr_spi200_data)
+ g_core_fp.fp_burst_enable(ts, 0);
+ else if (len > DATA_LEN_4)
+ g_core_fp.fp_burst_enable(ts, 1);
+ else
+ g_core_fp.fp_burst_enable(ts, 0);
+
+ if (len > max_trans_sz) {
+ for (i = 0; i < len; i += max_trans_sz) {
+ if ((len - i) > max_trans_sz)
+ temp_len = max_trans_sz;
+ else
+ temp_len = len % max_trans_sz;
+ temp_addr.dword = cpu_to_le32(orig_addr + i);
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_ahb_addr_byte_0),
+ temp_addr.byte, val + i, temp_len + ADDR_LEN_4);
+ if (ret < 0) {
+ E("xfer fail!");
+ mutex_unlock(&ts->reg_lock);
+ return BUS_FAIL;
+ }
+ }
+ } else {
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_ahb_addr_byte_0), addr, val,
+ len + ADDR_LEN_4);
+ if (ret < 0) {
+ E("xfer fail!");
+ mutex_unlock(&ts->reg_lock);
+ return BUS_FAIL;
+ }
+ }
+
+ mutex_unlock(&ts->reg_lock);
+
+ return NO_ERR;
+}
+
+static int himax_mcu_reg_write(struct himax_ts_data *ts,
+ struct hx_reg_t *addr, struct data_pack_t *data)
+{
+ return g_core_fp.fp_register_write(ts,
+ addr->data.byte, data->data.byte, data->len);
+}
+
+static void himax_mcu_interface_on(struct himax_ts_data *ts)
+{
+ u8 tmp_data[DATA_LEN_4];
+ u8 tmp_data2[DATA_LEN_4];
+ int cnt = 0;
+ int ret = 0;
+
+ /* Read a dummy register to wake up BUS.*/
+ ret = himax_bus_read(ts, IC_GET_VAL(addr_ahb_rdata_byte_0), tmp_data,
+ DATA_LEN_4);
+ if (ret < 0) {/* to knock BUS*/
+ E("bus access fail!");
+ return;
+ }
+
+ do {
+ tmp_data[0] = IC_GET_VAL(data_conti);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_conti), NULL, tmp_data, 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ return;
+ }
+
+ tmp_data[0] = IC_GET_VAL(data_incr4);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(addr_incr4), NULL, tmp_data, 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ return;
+ }
+
+ /*Check cmd*/
+ himax_bus_read(ts, IC_GET_VAL(addr_conti), tmp_data, 1);
+ himax_bus_read(ts, IC_GET_VAL(addr_incr4), tmp_data2, 1);
+
+ if (tmp_data[0] == IC_GET_VAL(data_conti) &&
+ tmp_data2[0] == IC_GET_VAL(data_incr4))
+ break;
+
+ usleep_range(1000, 1100);
+ } while (++cnt < 10);
+
+ if (cnt > 0)
+ I("Polling burst mode: %d times", cnt);
+}
+
+static void himax_mcu_power_on_init(struct himax_ts_data *ts)
+{
+ union hx_dword_data_t tmp_data = { .byte = {0x01, 0x00, 0x00, 0x00} };
+ u8 retry = 0;
+
+ /*RawOut select initial*/
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_raw_out_sel),
+ FW_GET_ARRAY(data_clear), FW_GET_SZ(data_clear));
+ /*DSRAM func initial*/
+ g_core_fp.fp_assign_sorting_mode(ts, FW_GET_ARRAY(data_clear));
+ /*N frame initial*/
+ /* reset N frame back to default value 1 for normal mode */
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_set_frame_addr),
+ tmp_data.byte, 4);
+ /*FW reload done initial*/
+ g_core_fp.fp_register_write(ts,
+ DRV_GET_ARRAY(addr_fw_define_2nd_flash_reload),
+ FW_GET_ARRAY(data_clear), FW_GET_SZ(data_clear));
+
+ g_core_fp.fp_sense_on(ts, 0x00);
+
+ I("waiting for FW reload data");
+
+ while (retry++ < 30) {
+ g_core_fp.fp_register_read(ts,
+ DRV_GET_ARRAY(addr_fw_define_2nd_flash_reload), tmp_data.byte,
+ DATA_LEN_4);
+
+ /* use all 4 bytes to compare */
+ if (le32_to_cpu(tmp_data.dword) == 0x72C0) {
+ I("FW reload done");
+ break;
+ }
+ I("wait FW reload %d times", retry);
+ g_core_fp.fp_read_FW_status(ts);
+ usleep_range(10000, 11000);
+ }
+}
+
+/* IC side end*/
+/* CORE_IC */
+
+/* CORE_FW */
+/* FW side start*/
+static void himax_mcu_system_reset(struct himax_ts_data *ts)
+{
+ int ret = 0;
+ u8 tmp_data[DATA_LEN_4];
+ int retry = 0;
+
+ g_core_fp.fp_interface_on(ts);
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_ctrl_fw_isr),
+ FW_GET_ARRAY(data_clear), FW_GET_SZ(data_clear));
+ do {
+ /* reset code*/
+ /**
+ * I2C_password[7:0] set Enter safe mode : 0x31 ==> 0x27
+ */
+ tmp_data[0] = IC_GET_VAL(data_i2c_psw_lb);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(adr_i2c_psw_lb), NULL, tmp_data,
+ 1);
+ if (ret < 0)
+ E("bus access fail!");
+
+ /**
+ * I2C_password[15:8] set Enter safe mode :0x32 ==> 0x95
+ */
+ tmp_data[0] = IC_GET_VAL(data_i2c_psw_ub);
+
+ ret = himax_bus_write(ts, IC_GET_VAL(adr_i2c_psw_ub), NULL, tmp_data,
+ 1);
+ if (ret < 0)
+ E("bus access fail!");
+
+ /**
+ * I2C_password[7:0] set Enter safe mode : 0x31 ==> 0x00
+ */
+ tmp_data[0] = 0x00;
+
+ ret = himax_bus_write(ts, IC_GET_VAL(adr_i2c_psw_lb), NULL, tmp_data,
+ 1);
+ if (ret < 0)
+ E("bus access fail!");
+
+ usleep_range(10000, 11000);
+
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_flag_reset_event),
+ tmp_data, DATA_LEN_4);
+ I("Read status from IC = %X,%X", tmp_data[0], tmp_data[1]);
+ } while ((tmp_data[1] != 0x02 || tmp_data[0] != 0x00) && retry++ < 5);
+}
+
+static void himax_mcu_usb_detect_set(struct himax_ts_data *ts,
+ const u8 *cable_config)
+{
+ struct hx_reg_t tmp_reg;
+ struct hx_reg_t back_reg;
+ u8 retry_cnt = 0;
+
+ do {
+ if (cable_config[1] == 0x01) {
+ WORD_REG(tmp_reg, fw_func_handshaking_pwd);
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_usb_detect),
+ REG_GET_ARRAY(tmp_reg), REG_GET_SZ(tmp_reg));
+ WORD_REG(back_reg, fw_func_handshaking_pwd);
+ I("USB detect status IN!");
+ } else {
+ WORD_REG(tmp_reg, fw_data_safe_mode_release_pw_reset);
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_usb_detect),
+ REG_GET_ARRAY(tmp_reg), REG_GET_SZ(tmp_reg));
+ WORD_REG(back_reg, fw_data_safe_mode_release_pw_reset);
+ I("USB detect status OUT!");
+ }
+
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_usb_detect),
+ REG_GET_ARRAY(tmp_reg), REG_GET_SZ(tmp_reg));
+ /*I("tmp_data[0]=%d, USB detect=%d, retry_cnt=%d",
+ * tmp_data[0], cable_config[1], retry_cnt);
+ */
+ retry_cnt++;
+ } while ((REG_GET_ARRAY(tmp_reg)[3] != REG_GET_ARRAY(back_reg)[3] ||
+ REG_GET_ARRAY(tmp_reg)[2] != REG_GET_ARRAY(back_reg)[2] ||
+ REG_GET_ARRAY(tmp_reg)[1] != REG_GET_ARRAY(back_reg)[1] ||
+ REG_GET_ARRAY(tmp_reg)[0] != REG_GET_ARRAY(back_reg)[0]) &&
+ retry_cnt < HIMAX_REG_RETRY_TIMES);
+}
+
+/* Please call this function after FW finish reload done */
+static void himax_mcu_read_FW_ver(struct himax_ts_data *ts)
+{
+ u8 data[12] = {0};
+
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_fw_ver_addr), data,
+ DATA_LEN_4);
+ ts->ic_data->vendor_panel_ver = data[0];
+ ts->ic_data->vendor_fw_ver = data[1] << 8 | data[2];
+ I("PANEL_VER : %X", ts->ic_data->vendor_panel_ver);
+ I("FW_VER : %X", ts->ic_data->vendor_fw_ver);
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_fw_cfg_addr), data,
+ DATA_LEN_4);
+ ts->ic_data->vendor_config_ver = data[2] << 8 | data[3];
+ /*I("CFG_VER : %X",ts->ic_data->vendor_config_ver);*/
+ ts->ic_data->vendor_touch_cfg_ver = data[2];
+ I("TOUCH_VER : %X", ts->ic_data->vendor_touch_cfg_ver);
+ ts->ic_data->vendor_display_cfg_ver = data[3];
+ I("DISPLAY_VER : %X", ts->ic_data->vendor_display_cfg_ver);
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_fw_vendor_addr), data,
+ DATA_LEN_4);
+ ts->ic_data->vendor_cid_maj_ver = data[2];
+ ts->ic_data->vendor_cid_min_ver = data[3];
+ I("CID_VER : %X", (ts->ic_data->vendor_cid_maj_ver << 8
+ | ts->ic_data->vendor_cid_min_ver));
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_cus_info), data, 12);
+ memcpy(ts->ic_data->vendor_cus_info, data, 12);
+ I("Cusomer ID = %s", ts->ic_data->vendor_cus_info);
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_proj_info), data, 12);
+ memcpy(ts->ic_data->vendor_proj_info, data, 12);
+ I("Project ID = %s", ts->ic_data->vendor_proj_info);
+ hx_hid_update_info(ts);
+}
+
+static u32 dbg_reg_ary[4] = {fw_addr_fw_dbg_msg_addr,
+ fw_addr_chk_fw_status, fw_addr_chk_dd_status, fw_addr_flag_reset_event};
+
+static void himax_mcu_read_FW_status(struct himax_ts_data *ts)
+{
+ u8 len = 0;
+ u8 i = 0;
+ struct hx_reg_t addr_reg;
+ u8 data[4] = {0};
+
+ len = (u8)(sizeof(dbg_reg_ary) / sizeof(u32));
+
+ for (i = 0; i < len; i++) {
+ WORD_REG(addr_reg, dbg_reg_ary[i]);
+ g_core_fp.fp_register_read(ts, REG_GET_ARRAY(addr_reg),
+ data, DATA_LEN_4);
+
+ I("reg[0-3] : 0x%08X = 0x%02X, 0x%02X, 0x%02X, 0x%02X",
+ dbg_reg_ary[i], data[0], data[1], data[2], data[3]);
+ }
+}
+
+static void himax_mcu_irq_switch(struct himax_ts_data *ts, int switch_on)
+{
+ if (switch_on) {
+ if (ts->use_irq)
+ himax_int_enable(ts, switch_on);
+ else
+ hrtimer_start(&ts->timer, ktime_set(1, 0),
+ HRTIMER_MODE_REL);
+ } else {
+ if (ts->use_irq) {
+ himax_int_enable(ts, switch_on);
+ } else {
+ hrtimer_cancel(&ts->timer);
+ cancel_work_sync(&ts->work);
+ }
+ }
+}
+
+static int himax_mcu_assign_sorting_mode(struct himax_ts_data *ts,
+ u8 *tmp_data_in)
+{
+ u8 retry = 0;
+ union hx_dword_data_t rdata = {0};
+ u32 sorting_addr = FW_GET_VAL(addr_sorting_mode_en);
+ union hx_dword_data_t *tmp_data = (union hx_dword_data_t *)tmp_data_in;
+
+ I("addr: 0x%08X, write: 0x%08X",
+ sorting_addr, le32_to_cpu(tmp_data->dword));
+
+ while (retry++ < 3) {
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_sorting_mode_en),
+ tmp_data->byte, DATA_LEN_4);
+ usleep_range(1000, 1100);
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_sorting_mode_en),
+ rdata.byte, DATA_LEN_4);
+
+ if (rdata.dword == tmp_data->dword) {
+ I("success to write sorting mode");
+ return NO_ERR;
+ }
+ E("fail to write sorting mode");
+ }
+
+ return BUS_FAIL;
+}
+
+static void hx_ap_notify_fw_sus(struct himax_ts_data *ts, int suspend)
+{
+ int retry = 0;
+ int read_sts = 0;
+ union hx_dword_data_t read_tmp = {0};
+ union hx_dword_data_t addr_tmp = {0};
+ union hx_dword_data_t data_tmp = {0};
+
+ addr_tmp.dword = FW_GET_VAL(addr_ap_notify_fw_sus);
+
+ if (suspend) {
+ I("Suspend mode!");
+ data_tmp.dword = FW_GET_VAL(data_ap_notify_fw_sus_en);
+ } else {
+ I("Non-Suspend mode!");
+ data_tmp.dword = FW_GET_VAL(data_ap_notify_fw_sus_dis);
+ }
+
+ I("R%08XH<-0x%08X", addr_tmp.dword, data_tmp.dword);
+ addr_tmp.dword = cpu_to_le32(addr_tmp.dword);
+ data_tmp.dword = cpu_to_le32(data_tmp.dword);
+ do {
+ g_core_fp.fp_register_write(ts, addr_tmp.byte, data_tmp.byte,
+ sizeof(data_tmp.byte));
+ usleep_range(1000, 1001);
+ read_sts = g_core_fp.fp_register_read(ts, addr_tmp.byte, read_tmp.byte,
+ sizeof(read_tmp.byte));
+ I("read bus status=%d", read_sts);
+ I("Now retry=%d, data=0x%08X", retry,
+ le32_to_cpu(read_tmp.dword));
+ } while ((retry++ < 10) && (read_sts != NO_ERR) &&
+ (read_tmp.dword != data_tmp.dword));
+}
+
+/* FW side end*/
+/* CORE_FW */
+
+/* CORE_FLASH */
+/* FLASH side start*/
+
+
+/* CORE_DRIVER */
+static void himax_suspend_proc(struct himax_ts_data *ts, bool suspended)
+{
+ I("himax suspend.");
+}
+
+static void himax_resume_proc(struct himax_ts_data *ts, bool suspended)
+{
+ int result = 0;
+
+ I("himax resume.");
+
+ if (g_core_fp.fp_resend_cmd_func) {
+ g_core_fp.fp_resend_cmd_func(ts, suspended);
+ ts->resume_success = true;
+ }
+
+
+ if (g_core_fp.fp_ap_notify_fw_sus && result == 0)
+ g_core_fp.fp_ap_notify_fw_sus(ts, 0);
+}
+
+static void himax_mcu_pin_reset(struct himax_ts_data *ts)
+{
+ const int rst_low_period_s = RST_LOW_PERIOD_S;
+ const int rst_low_period_e = RST_LOW_PERIOD_E;
+ int rst_high_period_s;
+ int rst_high_period_e;
+
+ I("Now reset the Touch chip.");
+
+ rst_high_period_s = RST_HIGH_PERIOD_S;
+ rst_high_period_e = RST_HIGH_PERIOD_E;
+
+ himax_rst_gpio_set(ts->rst_gpio, 0);
+ usleep_range(rst_low_period_s, rst_low_period_e);
+ himax_rst_gpio_set(ts->rst_gpio, 1);
+ usleep_range(rst_high_period_s, rst_high_period_e);
+}
+
+static void himax_mcu_ic_reset(struct himax_ts_data *ts, u8 loadconfig,
+ u8 int_off)
+{
+ I("status: loadconfig=%d,int_off=%d", loadconfig, int_off);
+
+ if (ts->rst_gpio >= 0) {
+ if (int_off)
+ g_core_fp.fp_irq_switch(ts, 0);
+
+ g_core_fp.fp_pin_reset(ts);
+
+ if (int_off)
+ g_core_fp.fp_irq_switch(ts, 1);
+ }
+}
+
+static u8 himax_mcu_tp_info_check(struct himax_ts_data *ts)
+{
+ union hx_dword_data_t addr;
+ char data[DATA_LEN_4] = {0};
+ u32 rx_num;
+ u32 tx_num;
+ u32 bt_num;
+ u32 max_pt;
+ u32 y_res;
+ u32 x_res;
+ u8 int_is_edge;
+ u8 stylus_func;
+ u8 stylus_id_v2;
+ u8 stylus_ratio;
+
+ g_core_fp.fp_register_read(ts,
+ DRV_GET_ARRAY(addr_fw_define_rxnum_txnum), data, DATA_LEN_4);
+ rx_num = data[2];
+ tx_num = data[3];
+
+ g_core_fp.fp_register_read(ts,
+ DRV_GET_ARRAY(addr_fw_define_maxpt_xyrvs), data, DATA_LEN_4);
+ max_pt = data[0];
+
+ g_core_fp.fp_register_read(ts,
+ DRV_GET_ARRAY(addr_fw_define_x_y_res), data, DATA_LEN_4);
+ y_res = be16_to_cpup((u16 *)&data[0]);
+ x_res = be16_to_cpup((u16 *)&data[2]);
+ /* I("rx_num=%d, tx_num=%d, max_pt=%d, y_res=%d, x_res=%d",
+ * rx_num, tx_num, max_pt, y_res, x_res);
+ */
+
+ g_core_fp.fp_register_read(ts,
+ DRV_GET_ARRAY(addr_fw_define_int_is_edge), data, DATA_LEN_4);
+ if ((data[1] & 0x01) == 1)
+ int_is_edge = true;
+ else
+ int_is_edge = false;
+
+ /*1. Read number of MKey R100070E8H to determin data size*/
+ g_core_fp.fp_register_read(ts, SRAM_GET_ARRAY(addr_mkey), data,
+ DATA_LEN_4);
+ bt_num = data[0] & 0x03;
+ ts->ic_data->HX_BT_NUM = bt_num;
+
+ addr.dword = 0x1000719C;
+ addr.dword = cpu_to_le32(addr.dword);
+
+ g_core_fp.fp_register_read(ts, addr.byte, data, DATA_LEN_4);
+ stylus_func = data[3];
+ ts->ic_data->HX_STYLUS_FUNC = stylus_func;
+
+ ts->ic_data->HX_RX_NUM = rx_num;
+
+ ts->ic_data->HX_TX_NUM = tx_num;
+
+ ts->ic_data->HX_X_RES = x_res;
+ ts->ic_data->HX_Y_RES = y_res;
+ ts->ic_data->HX_MAX_PT = max_pt;
+ ts->ic_data->HX_INT_IS_EDGE = int_is_edge;
+
+ if (ts->ic_data->HX_STYLUS_FUNC) {
+ addr.dword = 0x100071FC;
+ addr.dword = cpu_to_le32(addr.dword);
+ g_core_fp.fp_register_read(ts, addr.byte, data, DATA_LEN_4);
+ stylus_id_v2 = data[2];/* 0x100071FE 0=off 1=on */
+ stylus_ratio = data[3];
+ /* 0x100071FF 0=ratio_1 10=ratio_10 */
+ ts->ic_data->HX_STYLUS_ID_V2 = stylus_id_v2;
+ ts->ic_data->HX_STYLUS_RATIO = stylus_ratio;
+ }
+
+ I("TOUCH_INFO updated");
+
+ return 0;
+}
+
+static void himax_mcu_touch_information(struct himax_ts_data *ts)
+{
+ if (ts->ic_data->HX_RX_NUM == 0xFFFFFFFF)
+ ts->ic_data->HX_RX_NUM = FIX_HX_RX_NUM;
+
+ if (ts->ic_data->HX_TX_NUM == 0xFFFFFFFF)
+ ts->ic_data->HX_TX_NUM = FIX_HX_TX_NUM;
+
+ if (ts->ic_data->HX_BT_NUM == 0xFFFFFFFF)
+ ts->ic_data->HX_BT_NUM = FIX_HX_BT_NUM;
+
+ if (ts->ic_data->HX_MAX_PT == 0xFFFFFFFF)
+ ts->ic_data->HX_MAX_PT = FIX_HX_MAX_PT;
+
+ if (ts->ic_data->HX_INT_IS_EDGE == 0xFF)
+ ts->ic_data->HX_INT_IS_EDGE = FIX_HX_INT_IS_EDGE;
+
+ if (ts->ic_data->HX_STYLUS_FUNC == 0xFF)
+ ts->ic_data->HX_STYLUS_FUNC = FIX_HX_STYLUS_FUNC;
+
+ if (ts->ic_data->HX_STYLUS_ID_V2 == 0xFF)
+ ts->ic_data->HX_STYLUS_ID_V2 = FIX_HX_STYLUS_ID_V2;
+
+ if (ts->ic_data->HX_STYLUS_RATIO == 0xFF)
+ ts->ic_data->HX_STYLUS_RATIO = FIX_HX_STYLUS_RATIO;
+
+ I("HX_RX_NUM = %d,HX_TX_NUM = %d",
+ ts->ic_data->HX_RX_NUM, ts->ic_data->HX_TX_NUM);
+ I("HX_MAX_PT = %d", ts->ic_data->HX_MAX_PT);
+ I("HX_INT_IS_EDGE = %d,HX_STYLUS_FUNC = %d",
+ ts->ic_data->HX_INT_IS_EDGE, ts->ic_data->HX_STYLUS_FUNC);
+ I("HX_STYLUS_ID_V2 = %d,HX_STYLUS_RATIO = %d",
+ ts->ic_data->HX_STYLUS_ID_V2, ts->ic_data->HX_STYLUS_RATIO);
+}
+
+static void himax_mcu_calc_touch_data_size(struct himax_ts_data *ts)
+{
+ ts->x_channel = ts->ic_data->HX_RX_NUM;
+ ts->y_channel = ts->ic_data->HX_TX_NUM;
+ ts->n_finger_support = ts->ic_data->HX_MAX_PT;
+}
+
+static int himax_mcu_ic_excp_recovery
+ (struct himax_ts_data *ts,
+ u32 hx_excp_event,
+ u32 hx_zero_event,
+ u32 length)
+{
+ int ret_val = NO_ERR;
+
+ if (hx_excp_event == length) {
+ ts->excp_zero_event_count = 0;
+ ret_val = HX_EXCP_EVENT;
+ } else if (hx_zero_event == length) {
+ if (ts->excp_zero_event_count > 5) {
+ ts->excp_zero_event_count = 0;
+ I("EXCEPTION event checked - ALL Zero.");
+ ret_val = HX_EXCP_EVENT;
+ } else {
+ ts->excp_zero_event_count++;
+ I("ALL Zero event is %d times.",
+ ts->excp_zero_event_count);
+ ret_val = HX_ZERO_EVENT_COUNT;
+ }
+ }
+
+ return ret_val;
+}
+
+static void himax_mcu_excp_ic_reset(struct himax_ts_data *ts)
+{
+ ts->excp_reset_active = 0;
+ himax_mcu_pin_reset(ts);
+ I("reset!");
+}
+
+static void himax_mcu_resend_cmd_func(struct himax_ts_data *ts, bool suspended)
+{
+ himax_cable_detect_func(ts, true);
+}
+
+/* CORE_DRIVER */
+
+static void hx_dis_rload_0f(struct himax_ts_data *ts, int disable)
+{
+ /*Disable Flash Reload*/
+ g_core_fp.fp_register_write(ts,
+ DRV_GET_ARRAY(addr_fw_define_flash_reload),
+ ZF_GET_ARRAY(data_dis_flash_reload), DATA_LEN_4);
+}
+
+static bool hx83102j_chip_detect(struct himax_ts_data *ts)
+{
+ DEF_WORD_DATA(tmp_data);
+ struct hx_reg_t tmp_addr;
+ bool ret_data = false;
+ int ret = 0;
+ int i = 0;
+ bool check_flash;
+
+ g_core_fp.fp_pin_reset(ts);
+ ret = himax_bus_read(ts, 0x13, tmp_data.data.byte, 1);
+ if (ret < 0) {
+ E("bus access fail!");
+ return false;
+ }
+
+ check_flash = true;
+
+ if (g_core_fp.fp_sense_off(ts, check_flash) == false) {
+ ret_data = false;
+ E("hx83102_sense_off Fail!");
+ return ret_data;
+ }
+
+ for (i = 0; i < 5; i++) {
+ WORD_REG(tmp_addr, 0x900000D0);
+ ret = g_core_fp.fp_reg_read(ts, &tmp_addr, &tmp_data);
+ if (ret != 0) {
+ ret_data = false;
+ E("read ic id Fail");
+ return ret_data;
+ }
+
+ if (((*tmp_data.data.word) & 0x83102900) == 0x83102900) {
+ strscpy(ts->chip_name,
+ HX83102J_ID, 30);
+ (ts->ic_data)->ic_adc_num =
+ hx83102j_data_adc_num;
+ ts->ic_data->flash_size = HX83102J_FLASH_SIZE;
+ ts->ic_data->icid = *tmp_data.data.word;
+ I("detect IC HX83102J successfully");
+ ret_data = true;
+ break;
+ }
+ E("Read driver IC ID = %X,%X,%X",
+ tmp_data_array[3],
+ tmp_data_array[2], tmp_data_array[1]); /*83,10,2X*/
+ ret_data = false;
+ E("Read driver ID register Fail!");
+ E("Could NOT find Himax Chipset");
+ E("Please check:\n1.VCCD,VCCA,VSP,VSN");
+ E("2. LCM_RST,TP_RST");
+ E("3. Power On Sequence");
+ }
+
+ return ret_data;
+}
+
+static void hx83102j_sense_on(struct himax_ts_data *ts, u8 flash_mode)
+{
+ int ret = 0;
+
+ DEF_WORD_DATA(tmp_data);
+
+ I("Enter");
+ ts->notouch_frame = ts->ic_notouch_frame;
+ g_core_fp.fp_interface_on(ts);
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_ctrl_fw_isr),
+ FW_GET_ARRAY(data_clear), FW_GET_SZ(data_clear));
+ usleep_range(10000, 11000);
+ if (!flash_mode) {
+ g_core_fp.fp_ic_reset(ts, false, false);
+ } else {
+ tmp_data.data.half[0] = 0;
+ ret = himax_bus_write(ts, IC_GET_ARRAY(adr_i2c_psw_lb)[0], NULL,
+ tmp_data.data.byte, 2);
+ if (ret < 0) {
+ E("cmd=%x bus access fail!",
+ IC_GET_ARRAY(adr_i2c_psw_lb)[0]);
+ }
+ }
+}
+
+static bool hx83102j_sense_off(struct himax_ts_data *ts, bool check_en)
+{
+ u32 cnt = 0;
+ struct hx_reg_t tmp_addr = {0};
+ int ret = 0;
+
+ DEF_WORD_DATA(tmp_data);
+
+ do {
+ if (cnt == 0 ||
+ (tmp_data.data.byte[0] != 0xA5 &&
+ tmp_data.data.byte[0] != 0x00 &&
+ tmp_data.data.byte[0] != 0x87))
+ g_core_fp.fp_register_write(ts, FW_GET_ARRAY(addr_ctrl_fw_isr),
+ FW_GET_ARRAY(data_fw_stop), FW_GET_SZ(data_fw_stop));
+ usleep_range(10000, 10001);
+
+ /* check fw status */
+ g_core_fp.fp_register_read(ts, IC_GET_ARRAY(addr_cs_central_state),
+ tmp_data.data.byte, tmp_data.len);
+
+ if (tmp_data.data.byte[0] != 0x05) {
+ I("Do not need wait FW, Status = 0x%02X!", tmp_data.data.byte[0]);
+ break;
+ }
+
+ g_core_fp.fp_register_read(ts, FW_GET_ARRAY(addr_ctrl_fw_isr),
+ tmp_data.data.byte, tmp_data.len);
+ I("cnt = %d, data[0] = 0x%02X!", cnt, tmp_data.data.byte[0]);
+ } while (tmp_data.data.byte[0] != 0x87 && ++cnt < 35 && check_en);
+
+ cnt = 0;
+
+ do {
+ /**
+ * set Enter safe mode : 0x31 ==> 0x9527
+ */
+ tmp_data.data.half[0] = 0x9527;
+ ret = himax_bus_write(ts, 0x31, NULL, tmp_data.data.byte, 2);
+ if (ret < 0) {
+ E("bus access fail!");
+ return false;
+ }
+
+ /**
+ *Check enter_save_mode
+ */
+ WORD_REG(tmp_addr, 0x900000A8);
+ g_core_fp.fp_reg_read(ts, &tmp_addr, &tmp_data);
+ I("Check enter_save_mode data[0]=%X", tmp_data.data.byte[0]);
+
+ if (tmp_data.data.byte[0] == 0x0C) {
+ /**
+ *Reset TCON
+ */
+ WORD_REG(tmp_addr, 0x80020004);
+ VAL_SET(tmp_data, 0x00000000);
+ g_core_fp.fp_reg_write(ts, &tmp_addr, &tmp_data);
+ usleep_range(1000, 1001);
+ return true;
+ }
+ usleep_range(5000, 5001);
+ g_core_fp.fp_pin_reset(ts);
+ } while (cnt++ < 5);
+
+ return false;
+}
+
+static bool hx83102j_read_event_stack(struct himax_ts_data *ts,
+ u8 *buf, u32 length)
+{
+ int ret = 0;
+
+ ret = himax_bus_read(ts, FW_GET_ARRAY(addr_event_addr)[0], buf, length);
+
+ return (ret == NO_ERR) ? true : false;
+}
+
+static void hx83102j_chip_init(struct himax_ts_data *ts)
+{
+ ts->chip_cell_type = CHIP_IS_IN_CELL;
+ ts->chip_max_dsram_size = 73728;
+ I("IC cell type = %d", ts->chip_cell_type);
+ ts->ic_checksum_type = HX_TP_BIN_CHECKSUM_CRC;
+ /*Himax: Set FW and CFG Flash Address*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_fw_ver_major, 59397); /*0x00E805*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_fw_ver_minor, 59398); /*0x00E806*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_cfg_ver_major, 59648); /*0x00E900*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_cfg_ver_minor, 59649); /*0x00E901*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_cid_ver_major, 59394); /*0x00E802*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_cid_ver_minor, 59395); /*0x00E803*/
+ WORD_REG(g_core_regs.flash_ver_info.addr_cfg_table, 0x10000);
+ g_core_regs.flash_ver_info.addr_cfg_table_t.data.word =
+ g_core_regs.flash_ver_info.addr_cfg_table.data.word;
+ ts->ic_data->enc16bits = false;
+}
+
+static void himax_ic_reg_init(struct himax_core_command_regs *reg_data)
+{
+ I("Entering!");
+/* CORE_IC -start- */
+ BYTE_REG(reg_data->ic_op.addr_ahb_addr_byte_0, ic_adr_ahb_addr_byte_0);
+ BYTE_REG(reg_data->ic_op.addr_ahb_rdata_byte_0, ic_adr_ahb_rdata_byte_0);
+ BYTE_REG(reg_data->ic_op.addr_ahb_access_direction, ic_adr_ahb_access_direction);
+ BYTE_REG(reg_data->ic_op.addr_conti, ic_adr_conti);
+ BYTE_REG(reg_data->ic_op.addr_incr4, ic_adr_incr4);
+ BYTE_REG(reg_data->ic_op.adr_i2c_psw_lb, ic_adr_i2c_psw_lb);
+ BYTE_REG(reg_data->ic_op.adr_i2c_psw_ub, ic_adr_i2c_psw_ub);
+ BYTE_REG(reg_data->ic_op.data_ahb_access_direction_read, ic_cmd_ahb_access_direction_read);
+ BYTE_REG(reg_data->ic_op.data_conti, ic_cmd_conti);
+ BYTE_REG(reg_data->ic_op.data_incr4, ic_cmd_incr4);
+ BYTE_REG(reg_data->ic_op.data_i2c_psw_lb, ic_cmd_i2c_psw_lb);
+ BYTE_REG(reg_data->ic_op.data_i2c_psw_ub, ic_cmd_i2c_psw_ub);
+ WORD_REG(reg_data->ic_op.addr_tcon_on_rst, hx83102j_ic_adr_tcon_rst);
+ WORD_REG(reg_data->ic_op.addr_cs_central_state, ic_adr_cs_central_state);
+/* CORE_IC -end- */
+/* CORE_FW -start- */
+ WORD_REG(reg_data->fw_op.addr_system_reset, fw_addr_system_reset);
+ WORD_REG(reg_data->fw_op.addr_ctrl_fw_isr, fw_addr_ctrl_fw);
+ WORD_REG(reg_data->fw_op.addr_flag_reset_event, fw_addr_flag_reset_event);
+ WORD_REG(reg_data->fw_op.addr_raw_out_sel, hx83102j_fw_addr_raw_out_sel);
+ WORD_REG(reg_data->fw_op.addr_reload_status, fw_addr_reload_status);
+ WORD_REG(reg_data->fw_op.addr_reload_crc32_result,
+ fw_addr_reload_crc32_result);
+ WORD_REG(reg_data->fw_op.addr_reload_addr_from, fw_addr_reload_addr_from);
+ WORD_REG(reg_data->fw_op.addr_reload_addr_cmd_beat,
+ fw_addr_reload_addr_cmd_beat);
+ WORD_REG(reg_data->fw_op.addr_set_frame_addr, fw_addr_set_frame_addr);
+ WORD_REG(reg_data->fw_op.addr_sorting_mode_en, fw_addr_sorting_mode_en);
+ WORD_REG(reg_data->fw_op.addr_fw_ver_addr, fw_addr_fw_ver_addr);
+ WORD_REG(reg_data->fw_op.addr_fw_cfg_addr, fw_addr_fw_cfg_addr);
+ WORD_REG(reg_data->fw_op.addr_fw_vendor_addr, fw_addr_fw_vendor_addr);
+ WORD_REG(reg_data->fw_op.addr_cus_info, fw_addr_cus_info);
+ WORD_REG(reg_data->fw_op.addr_proj_info, fw_addr_proj_info);
+ WORD_REG(reg_data->fw_op.addr_ap_notify_fw_sus, fw_addr_ap_notify_fw_sus);
+ WORD_REG(reg_data->fw_op.data_ap_notify_fw_sus_en,
+ fw_data_ap_notify_fw_sus_en);
+ WORD_REG(reg_data->fw_op.data_ap_notify_fw_sus_dis,
+ fw_data_ap_notify_fw_sus_dis);
+ WORD_REG(reg_data->fw_op.data_system_reset, fw_data_system_reset);
+ WORD_REG(reg_data->fw_op.data_clear, fw_data_clear);
+ WORD_REG(reg_data->fw_op.data_fw_stop, fw_data_fw_stop);
+ BYTE_REG(reg_data->fw_op.addr_event_addr, fw_addr_event_addr);
+ WORD_REG(reg_data->fw_op.addr_usb_detect, fw_usb_detect_addr);
+/* CORE_FW -end- */
+/* CORE_SRAM */
+ /* sram start*/
+ WORD_REG(reg_data->sram_op.addr_mkey, sram_adr_mkey);
+ WORD_REG(reg_data->sram_op.addr_rawdata_addr, sram_adr_rawdata_addr);
+ HALF_REG(reg_data->sram_op.passwrd_start, sram_passwrd_start);
+ HALF_REG(reg_data->sram_op.passwrd_end, sram_passwrd_end);
+ /* sram end*/
+/* CORE_SRAM */
+/* CORE_DRIVER -start- */
+ WORD_REG(reg_data->driver_op.addr_fw_define_flash_reload,
+ driver_addr_fw_define_flash_reload);
+ WORD_REG(reg_data->driver_op.addr_fw_define_2nd_flash_reload,
+ driver_addr_fw_define_2nd_flash_reload);
+ WORD_REG(reg_data->driver_op.addr_fw_define_int_is_edge,
+ driver_addr_fw_define_int_is_edge);
+ WORD_REG(reg_data->driver_op.addr_fw_define_rxnum_txnum,
+ driver_addr_fw_define_rxnum_txnum);
+ WORD_REG(reg_data->driver_op.addr_fw_define_maxpt_xyrvs,
+ driver_addr_fw_define_maxpt_xyrvs);
+ WORD_REG(reg_data->driver_op.addr_fw_define_x_y_res,
+ driver_addr_fw_define_x_y_res);
+/* CORE_DRIVER -end- */
+ WORD_REG(reg_data->zf_op.data_dis_flash_reload, zf_data_dis_flash_reload);
+ WORD_REG(reg_data->zf_op.addr_system_reset, zf_addr_system_reset);
+ BYTE_REG(reg_data->zf_op.data_system_reset, zf_data_system_reset);
+ WORD_REG(reg_data->zf_op.data_sram_start_addr, zf_data_sram_start_addr);
+ WORD_REG(reg_data->zf_op.data_cfg_info, zf_data_cfg_info);
+ WORD_REG(reg_data->zf_op.data_fw_cfg_1, zf_data_fw_cfg_1);
+ WORD_REG(reg_data->zf_op.data_fw_cfg_2, zf_data_fw_cfg_2);
+ WORD_REG(reg_data->zf_op.data_fw_cfg_3, zf_data_fw_cfg_3);
+ WORD_REG(reg_data->zf_op.data_adc_cfg_1, zf_data_adc_cfg_1);
+ WORD_REG(reg_data->zf_op.data_adc_cfg_2, zf_data_adc_cfg_2);
+ WORD_REG(reg_data->zf_op.data_adc_cfg_3, zf_data_adc_cfg_3);
+ WORD_REG(reg_data->zf_op.data_map_table, zf_data_map_table);
+}
+
+static void himax_para_init(struct himax_ts_data *ts)
+{
+ I("Entering!");
+ ts->ic_notouch_frame = hx83102j_notouch_frame;
+}
+
+static void hx83102j_pin_reset(struct himax_ts_data *ts)
+{
+ I("Now reset the Touch chip.");
+ himax_rst_gpio_set(ts->rst_gpio, 0);
+ usleep_range(100 * 100, 101 * 100);
+ himax_rst_gpio_set(ts->rst_gpio, 1);
+ usleep_range(200 * 100, 201 * 100);
+}
+
+static void himax_ic_fp_init(void)
+{
+ I("Entering!");
+/* CORE_IC */
+ g_core_fp.fp_burst_enable = himax_mcu_burst_enable;
+ g_core_fp.fp_register_read = himax_mcu_register_read;
+ g_core_fp.fp_reg_read = himax_mcu_reg_read;
+ g_core_fp.fp_register_write = himax_mcu_register_write;
+ g_core_fp.fp_reg_write = himax_mcu_reg_write;
+ g_core_fp.fp_interface_on = himax_mcu_interface_on;
+ g_core_fp.fp_sense_on = hx83102j_sense_on;
+ g_core_fp.fp_sense_off = hx83102j_sense_off;
+ g_core_fp.fp_power_on_init = himax_mcu_power_on_init;
+/* CORE_IC */
+/* CORE_FW */
+ g_core_fp.fp_system_reset = himax_mcu_system_reset;
+ g_core_fp.fp_usb_detect_set = himax_mcu_usb_detect_set;
+ g_core_fp.fp_reload_disable = hx_dis_rload_0f;
+ g_core_fp.fp_read_FW_ver = himax_mcu_read_FW_ver;
+ g_core_fp.fp_read_FW_status = himax_mcu_read_FW_status;
+ g_core_fp.fp_irq_switch = himax_mcu_irq_switch;
+ g_core_fp.fp_assign_sorting_mode = himax_mcu_assign_sorting_mode;
+ g_core_fp.fp_ap_notify_fw_sus = hx_ap_notify_fw_sus;
+/* CORE_FW */
+/* CORE_DRIVER */
+ g_core_fp.fp_chip_detect = hx83102j_chip_detect;
+ g_core_fp.fp_chip_init = hx83102j_chip_init;
+ g_core_fp.fp_pin_reset = hx83102j_pin_reset;
+ g_core_fp.fp_ic_reset = himax_mcu_ic_reset;
+ g_core_fp.fp_tp_info_check = himax_mcu_tp_info_check;
+ g_core_fp.fp_touch_information = himax_mcu_touch_information;
+ g_core_fp.fp_calc_touch_data_size = himax_mcu_calc_touch_data_size;
+ g_core_fp.fp_ic_excp_recovery = himax_mcu_ic_excp_recovery;
+ g_core_fp.fp_excp_ic_reset = himax_mcu_excp_ic_reset;
+ g_core_fp.fp_resend_cmd_func = himax_mcu_resend_cmd_func;
+ g_core_fp.fp_read_event_stack = hx83102j_read_event_stack;
+ g_core_fp.fp_suspend_proc = himax_suspend_proc;
+ g_core_fp.fp_resume_proc = himax_resume_proc;
+/* CORE_DRIVER */
+
+}
+
+
+#if defined(CONFIG_HID_HIMAX)
+/* calculate time diff and return as milliseconds */
+static unsigned int time_diff(struct time_var *start, struct time_var *end)
+{
+ unsigned int diff = 0;
+
+ diff = (end->tv_sec - start->tv_sec) * 1000;
+ diff += (end->time_var_fine - start->time_var_fine) / time_var_fine_unit;
+
+ return diff;
+}
+#endif
+
+/* start himax_touch_get */
+static int himax_touch_get(struct himax_ts_data *ts, u8 *buf, int ts_path)
+{
+ u32 read_size = 0;
+ int ts_status = 0;
+
+ switch (ts_path) {
+ /*normal*/
+ case HX_REPORT_COORD:
+ case HX_REPORT_COORD_RAWDATA:
+ read_size = ts->touch_all_size;
+ break;
+ default:
+ break;
+ }
+
+ if (read_size == 0) {
+ E("Read size fault!");
+ ts_status = HX_TS_GET_DATA_FAIL;
+ } else {
+ if (!g_core_fp.fp_read_event_stack(ts, buf, read_size)) {
+ E("can't read data from chip!");
+ ts_status = HX_TS_GET_DATA_FAIL;
+ }
+ }
+
+ return ts_status;
+}
+
+/* start error_control*/
+static int himax_checksum_cal(struct himax_ts_data *ts, u8 *buf, int ts_path)
+{
+ u16 check_sum_cal = 0;
+ s32 i = 0;
+ int length = 0;
+ int zero_cnt = 0;
+ int ret_val = HX_TS_NORMAL_END;
+
+ /* Normal */
+ switch (ts_path) {
+ case HX_REPORT_COORD:
+ case HX_REPORT_COORD_RAWDATA:
+ length = ts->touch_info_size;
+ break;
+ default:
+ I("Neither Normal Nor SMWP error!");
+ ret_val = HX_PATH_FAIL;
+ goto END_FUNCTION;
+ }
+
+ for (i = 0; i < length; i++) {
+ check_sum_cal += buf[i];
+ if (buf[i] == 0x00)
+ zero_cnt++;
+ }
+
+ if (check_sum_cal % 0x100 != 0 && ts_path != HX_REPORT_COORD &&
+ ts_path != HX_REPORT_COORD_RAWDATA) {
+ I("point data_checksum not match check_sum_cal: 0x%02X",
+ check_sum_cal);
+ ret_val = HX_CHKSUM_FAIL;
+ } else if (zero_cnt == length) {
+ if (ts->use_irq)
+ I("[HIMAX TP MSG] All Zero event");
+
+ ret_val = HX_CHKSUM_FAIL;
+ } else {
+ if (ts_path == HX_REPORT_COORD ||
+ ts_path == HX_REPORT_COORD_RAWDATA) {
+ ret_val = HX_REPORT_DATA;
+ goto END_FUNCTION;
+ }
+ /*Need to clear event stack here*/
+ g_core_fp.fp_read_event_stack(ts, buf,
+ (HX_STACK_ORG_LEN - ts->touch_info_size));
+ }
+
+END_FUNCTION:
+ return ret_val;
+}
+
+static int hx_hid_parse(struct hid_device *hid)
+{
+ struct himax_ts_data *ts = NULL;
+ int ret;
+
+ if (!hid) {
+ E("hid is NULL");
+ return -EINVAL;
+ }
+
+ ts = hid->driver_data;
+ if (!ts) {
+ E("hid->driver_data is NULL");
+ return -EINVAL;
+ }
+
+ ret = hid_parse_report(hid, ts->hid_rd_data.rd_data,
+ ts->hid_rd_data.rd_length);
+ if (ret) {
+ E("failed parse report");
+ return ret;
+ }
+ I("rdesc parse success");
+ return 0;
+}
+
+static int hx_hid_start(struct hid_device *hid)
+{
+ D("enter");
+ return 0;
+}
+
+static void hx_hid_stop(struct hid_device *hid)
+{
+ D("enter");
+}
+
+static int hx_hid_open(struct hid_device *hid)
+{
+ D("enter");
+ return 0;
+}
+
+static void hx_hid_close(struct hid_device *hid)
+{
+ D("enter");
+}
+
+void hx_hid_update_info(struct himax_ts_data *ts)
+{
+ memcpy(&ts->hid_info.fw_bin_desc, &ts->fw_bin_desc, sizeof(struct hx_bin_desc_t));
+ ts->hid_info.vid = cpu_to_be16(ts->hid_desc.vendor_id);
+ ts->hid_info.pid = cpu_to_be16(ts->hid_desc.product_id);
+ ts->hid_info.cfg_version = ts->ic_data->vendor_touch_cfg_ver;
+ ts->hid_info.disp_version = ts->ic_data->vendor_display_cfg_ver;
+ ts->hid_info.rx = ts->ic_data->HX_RX_NUM;
+ ts->hid_info.tx = ts->ic_data->HX_TX_NUM;
+ ts->hid_info.yres = cpu_to_be16(ts->ic_data->HX_Y_RES);
+ ts->hid_info.xres = cpu_to_be16(ts->ic_data->HX_X_RES);
+ ts->hid_info.pt_num = ts->ic_data->HX_MAX_PT;
+ ts->hid_info.mkey_num = ts->ic_data->HX_BT_NUM;
+
+ // firmware table parameters, use only bl part.
+ ts->hid_info.bl_mapping.cmd = HID_FW_UPDATE_BL_CMD;
+ ts->hid_info.bl_mapping.bin_start_offset = 0;
+ ts->hid_info.bl_mapping.unit_sz = ts->ic_data->flash_size / 1024;
+}
+
+static int hx_hid_get_raw_report(const struct hid_device *hid, unsigned char reportnum,
+ __u8 *buf, size_t len, unsigned char report_type)
+{
+ struct himax_ts_data *ts = NULL;
+ int ret = 0;
+
+ ts = hid->driver_data;
+ if (!ts) {
+ E("hid->driver_data is NULL");
+ return -EINVAL;
+ }
+
+ D("reportnum:%d, len:%u, report_type:%d", reportnum, (unsigned int)len, report_type);
+
+ switch (reportnum) {
+ case ID_CONTACT_COUNT:
+ if (!ts->ic_data) {
+ E("ts->ic_data is NULL");
+ return -EINVAL;
+ }
+ buf[1] = ts->ic_data->HX_MAX_PT;
+ ret = len;
+ break;
+
+ default:
+ ret = -EINVAL;
+ };
+
+ if (ret > 0)
+ D("ret:%d", ret);
+
+ return ret;
+}
+
+static int hx_raw_request(struct hid_device *hid, unsigned char reportnum,
+ __u8 *buf, size_t len, unsigned char rtype, int reqtype)
+{
+ if (!hid) {
+ E("hid is NULL");
+ return -EINVAL;
+ }
+
+ D("report num %d, len %u, rtype %d, reqtype %d", reportnum, (unsigned int)len, rtype, reqtype);
+ switch (reqtype) {
+ case HID_REQ_GET_REPORT:
+ return hx_hid_get_raw_report(hid, reportnum, buf, len, rtype);
+ default:
+ return -EIO;
+ }
+
+ return -EINVAL;
+}
+
+static struct hid_ll_driver hx_hid_ll_driver = {
+ .parse = hx_hid_parse,
+ .start = hx_hid_start,
+ .stop = hx_hid_stop,
+ .open = hx_hid_open,
+ .close = hx_hid_close,
+ .raw_request = hx_raw_request
+};
+
+int hx_hid_report(const struct himax_ts_data *ts, u8 *data, s32 len)
+{
+ int ret = 0;
+
+ if (ts->hid)
+ ret = hid_input_report(ts->hid, HID_INPUT_REPORT, data, len, 1);
+
+ return ret;
+}
+
+static int hx_hid_desc_fetch(struct himax_ts_data *ts)
+{
+ if (!ts)
+ return -EINVAL;
+
+ I("desc_length: %d", ts->hid_desc.desc_length);
+ I("bcd_version: 0x%x", ts->hid_desc.bcd_version);
+ I("report_desc_length: %d", ts->hid_desc.report_desc_length);
+ I("max_input_length: %d", ts->hid_desc.max_input_length);
+ I("max_output_length: %d", ts->hid_desc.max_output_length);
+ I("max fragment length: %d", ts->hid_desc.max_fragment_length);
+ I("vendor_id: 0x%x", ts->hid_desc.vendor_id);
+ I("product_id: 0x%x", ts->hid_desc.product_id);
+ I("version_id: 0x%x", ts->hid_desc.version_id);
+ I("flags: 0x%x", ts->hid_desc.flags);
+
+ return 0;
+}
+
+int hx_hid_probe(struct himax_ts_data *ts)
+{
+ int ret;
+ struct hid_device *hid = NULL;
+
+ if (!ts) {
+ E("ts is NULL");
+ return -EINVAL;
+ }
+
+ ret = hx_hid_desc_fetch(ts);
+ if (ret) {
+ E("failed get hid desc");
+ return ret;
+ }
+
+ hid = ts->hid;
+ if (hid) {
+ hid_destroy_device(hid);
+ hid = NULL;
+ }
+
+ hid = hid_allocate_device();
+ if (IS_ERR(hid)) {
+ ret = PTR_ERR(hid);
+ return ret;
+ }
+
+ hid->driver_data = ts;
+ hid->ll_driver = &hx_hid_ll_driver;
+ hid->bus = BUS_SPI;
+ hid->dev.parent = &ts->spi->dev;
+
+ hid->version = ts->hid_desc.bcd_version;
+ hid->vendor = ts->hid_desc.vendor_id;
+ hid->product = ts->hid_desc.product_id;
+ snprintf(hid->name, sizeof(hid->name), "%s %04X:%04X", "hid-hxtp",
+ hid->vendor, hid->product);
+
+ ret = hid_add_device(hid);
+ if (ret) {
+ E("failed add hid device");
+ goto err_hid_data;
+ }
+ I("hid init success");
+ ts->hid = hid;
+ mutex_unlock(&ts->hid_ioctl_lock);
+ return 0;
+
+err_hid_data:
+ hid_destroy_device(hid);
+ return ret;
+}
+
+void hx_hid_remove(struct himax_ts_data *ts)
+{
+ mutex_lock(&ts->hid_ioctl_lock);
+ if (ts && ts->hid) {
+ hid_destroy_device(ts->hid);
+ } else {
+ D("ts or hid is NULL");
+ goto OUT;
+ }
+ ts->hid = NULL;
+
+ if (ts->hid_req_cfg.fw) {
+ I("free fw");
+ kfree(ts->hid_req_cfg.fw->data);
+ kfree(ts->hid_req_cfg.fw->priv);
+ kfree(ts->hid_req_cfg.fw);
+ ts->hid_req_cfg.fw = NULL;
+ }
+OUT:
+ mutex_unlock(&ts->hid_ioctl_lock);
+}
+static void himax_excp_hw_reset(struct himax_ts_data *ts)
+{
+
+ I("START EXCEPTION Reset");
+ hx_hid_remove(ts);
+ g_core_fp.fp_excp_ic_reset(ts);
+ hx_hid_probe(ts);
+
+ I("END EXCEPTION Reset");
+}
+
+static int himax_ts_event_check(struct himax_ts_data *ts,
+ const u8 *buf, int ts_path)
+{
+ u32 hx_EB_event = 0;
+ u32 hx_EC_event = 0;
+ u32 hx_ED_event = 0;
+ u32 hx_excp_event = 0;
+ u32 hx_zero_event = 0;
+ int shaking_ret = 0;
+
+ u32 i = 0;
+ u32 length = 0;
+ int ret_val = 0;
+
+ /* Normal */
+ switch (ts_path) {
+ case HX_REPORT_COORD:
+ length = ts->touch_info_size;
+ break;
+ case HX_REPORT_COORD_RAWDATA:
+ length = ts->touch_info_size;
+ break;
+ default:
+ I("Neither Normal Nor SMWP error!");
+ ret_val = HX_PATH_FAIL;
+ goto END_FUNCTION;
+ }
+
+ if (ts_path == HX_REPORT_COORD || ts_path == HX_REPORT_COORD_RAWDATA) {
+ for (i = 0; i < length; i++) {
+ /* case 1 EXCEEPTION recovery flow */
+ if (buf[i] == 0xEB) {
+ hx_EB_event++;
+ } else if (buf[i] == 0xEC) {
+ hx_EC_event++;
+ } else if (buf[i] == 0xED) {
+ hx_ED_event++;
+
+ /* case 2 EXCEPTION recovery flow-Disable */
+ } else if (buf[i] == 0x00) {
+ hx_zero_event++;
+ } else {
+ ts->excp_zero_event_count = 0;
+ break;
+ }
+ }
+ }
+
+ if (hx_EB_event == length) {
+ hx_excp_event = length;
+ ts->excp_eb_event_flag++;
+ I("[HIMAX TP MSG]: EXCEPTION event checked - ALL 0xEB.");
+ } else if (hx_EC_event == length) {
+ hx_excp_event = length;
+ ts->excp_ec_event_flag++;
+ I("[HIMAX TP MSG]: EXCEPTION event checked - ALL 0xEC.");
+ } else if (hx_ED_event == length) {
+ hx_excp_event = length;
+ ts->excp_ed_event_flag++;
+ I("[HIMAX TP MSG]: EXCEPTION event checked - ALL 0xED.");
+ }
+
+ if ((hx_excp_event == length || hx_zero_event == length) &&
+ ts->excp_reset_active == 0) {
+ shaking_ret = g_core_fp.fp_ic_excp_recovery(ts,
+ hx_excp_event, hx_zero_event, length);
+
+ if (shaking_ret == HX_EXCP_EVENT) {
+ g_core_fp.fp_read_FW_status(ts);
+ himax_excp_hw_reset(ts);
+ ret_val = HX_EXCP_EVENT;
+ } else if (shaking_ret == HX_ZERO_EVENT_COUNT) {
+ g_core_fp.fp_read_FW_status(ts);
+ ret_val = HX_ZERO_EVENT_COUNT;
+ } else {
+ I("IC is running. Nothing to be done!");
+ ret_val = HX_IC_RUNNING;
+ }
+
+ /* drop 1st interrupts after chip reset */
+ } else if (ts->excp_reset_active) {
+ ts->excp_reset_active = 0;
+ I("Skip by excp_reset_active.");
+ ret_val = HX_EXCP_REC_OK;
+ }
+
+END_FUNCTION:
+
+ return ret_val;
+}
+
+static int himax_err_ctrl(struct himax_ts_data *ts,
+ u8 *buf, int ts_path)
+{
+ int ts_status = HX_CHKSUM_FAIL;
+
+ ts_status = himax_checksum_cal(ts, buf, ts_path);
+ if (ts_status == HX_CHKSUM_FAIL) {
+ goto CHK_FAIL;
+ } else {
+ /* continuous N times record, not total N times. */
+ ts->excp_zero_event_count = 0;
+ goto END_FUNCTION;
+ }
+
+CHK_FAIL:
+ ts_status = himax_ts_event_check(ts, buf, ts_path);
+END_FUNCTION:
+ return ts_status;
+}
+
+/* end error_control*/
+
+static int himax_ts_operation(struct himax_ts_data *ts,
+ int ts_path)
+{
+ int ts_status = HX_TS_NORMAL_END;
+ int ret = 0;
+ u32 offset = 0;
+
+ memset(ts->xfer_buff,
+ 0x00,
+ ts->touch_all_size * sizeof(u8));
+ ts_status = himax_touch_get(ts, ts->xfer_buff, ts_path);
+ if (ts_status == HX_TS_GET_DATA_FAIL)
+ goto END_FUNCTION;
+
+ ts_status = himax_err_ctrl(ts, ts->xfer_buff, ts_path);
+ if (!(ts_status == HX_REPORT_DATA || ts_status == HX_TS_NORMAL_END))
+ goto END_FUNCTION;
+ if (ts->hid_probe) {
+ offset = 0;
+ if (!ts->hid_req_cfg.input_RD_de) {
+ ret = hx_hid_report(ts, ts->xfer_buff + offset + HID_REPORT_HDR_SZ,
+ ts->hid_desc.max_input_length - HID_REPORT_HDR_SZ);
+ }
+ offset += ts->hid_desc.max_input_length;
+ if (ts->ic_data->HX_STYLUS_FUNC) {
+ if (!ts->hid_req_cfg.input_RD_de) {
+ ret += hx_hid_report(ts,
+ ts->xfer_buff + offset + HID_REPORT_HDR_SZ,
+ ts->hid_desc.max_input_length - HID_REPORT_HDR_SZ);
+ }
+ offset += ts->hid_desc.max_input_length;
+ }
+ }
+
+ if (ret != 0)
+ ts_status = HX_TS_GET_DATA_FAIL;
+
+END_FUNCTION:
+ return ts_status;
+}
+
+void himax_cable_detect_func(struct himax_ts_data *ts, bool force_renew)
+{
+ /*u32 connect_status = 0;*/
+ u8 connect_status = 0;
+
+ connect_status = ts->latest_power_status;
+
+ /* I("Touch: cable status=%d, cable_config=%p, usb_connected=%d\n",*/
+ /* connect_status, ts->cable_config, ts->usb_connected); */
+ if (ts->cable_config) {
+ if (connect_status != ts->usb_connected || force_renew) {
+ if (connect_status) {
+ ts->cable_config[1] = 0x01;
+ ts->usb_connected = 0x01;
+ } else {
+ ts->cable_config[1] = 0x00;
+ ts->usb_connected = 0x00;
+ }
+
+ g_core_fp.fp_usb_detect_set(ts, ts->cable_config);
+ I("Cable status change: 0x%2.2X",
+ ts->usb_connected);
+ }
+ }
+}
+
+void himax_ts_work(struct himax_ts_data *ts)
+{
+ int ts_status = HX_TS_NORMAL_END;
+ int ts_path = 0;
+
+ if (ts->notouch_frame > 0) {
+ ts->notouch_frame--;
+ return;
+ }
+
+ himax_cable_detect_func(ts, false);
+
+ ts_path = HX_REPORT_COORD;
+ ts_status = himax_ts_operation(ts, ts_path);
+ if (ts_status == HX_TS_GET_DATA_FAIL) {
+ I("Now reset the Touch chip.");
+ g_core_fp.fp_ic_reset(ts, false, true);
+ }
+}
+
+/*end ts_work*/
+enum hrtimer_restart himax_ts_timer_func(struct hrtimer *timer)
+{
+ struct himax_ts_data *ts;
+
+ ts = container_of(timer, struct himax_ts_data, timer);
+ queue_work(ts->himax_wq, &ts->work);
+ hrtimer_start(&ts->timer, ktime_set(0, 12500000), HRTIMER_MODE_REL);
+
+ return HRTIMER_NORESTART;
+}
+
+static int hx_chk_flash_sts(struct himax_ts_data *ts, u32 size)
+{
+ int rslt = 0;
+ return rslt;
+}
+
+static int hx_hid_rd_init(struct himax_ts_data *ts)
+{
+ int ret = 0;
+ const u32 x_num = ts->ic_data->HX_RX_NUM;
+ const u32 y_num = ts->ic_data->HX_TX_NUM;
+ unsigned int raw_data_sz = (x_num * y_num + x_num + y_num) * 2 + 4;
+ u32 rd_sz = 0;
+
+ if (ts->hid_req_cfg.input_RD_de == 0)
+ rd_sz = ts->hid_desc.report_desc_length + host_ext_report_desc_sz;
+ else
+ rd_sz = host_heatmap_report_desc_sz + host_ext_report_desc_sz;
+
+ if (FLASH_VER_GET_VAL(addr_hid_rd_desc) != 0) {
+ if (ts->hid_rd_data.rd_data &&
+ rd_sz != ts->hid_rd_data.rd_length) {
+ kfree(ts->hid_rd_data.rd_data);
+ ts->hid_rd_data.rd_data = NULL;
+ }
+
+ if (!ts->hid_rd_data.rd_data)
+ ts->hid_rd_data.rd_data = kzalloc(rd_sz, GFP_KERNEL);
+
+ if (ts->hid_rd_data.rd_data) {
+ if (ts->hid_req_cfg.input_RD_de == 0) {
+ memcpy((void *)ts->hid_rd_data.rd_data,
+ &ts->hxfw->data[FLASH_VER_GET_VAL(addr_hid_rd_desc)],
+ ts->hid_desc.report_desc_length);
+ ts->hid_rd_data.rd_length = ts->hid_desc.report_desc_length;
+ } else {
+ memcpy((void *)ts->hid_rd_data.rd_data,
+ g_heatmap_rd.host_report_descriptor,
+ host_heatmap_report_desc_sz);
+ ts->hid_rd_data.rd_length = host_heatmap_report_desc_sz;
+ }
+ I("Re-assign HID DIAG size: original = %d, new = %d",
+ le16_to_cpu(g_host_ext_rd.rd_struct.monitor.report_cnt),
+ raw_data_sz);
+ g_host_ext_rd.rd_struct.monitor.report_cnt = cpu_to_le16(raw_data_sz);
+ memcpy((void *)(ts->hid_rd_data.rd_data + ts->hid_rd_data.rd_length),
+ &g_host_ext_rd.host_report_descriptor, host_ext_report_desc_sz);
+ ts->hid_rd_data.rd_length += host_ext_report_desc_sz;
+ } else {
+ E("hid rd data alloc fail");
+ ret = -ENOMEM;
+ }
+ }
+
+ return ret;
+}
+
+static void hx_hid_register(struct himax_ts_data *ts)
+{
+ if (ts->hid_probe) {
+ hid_destroy_device(ts->hid);
+ ts->hid = NULL;
+ ts->hid_probe = false;
+ }
+
+ if (hx_hid_probe(ts) != 0) {
+ E("hid probe fail");
+ ts->hid_probe = false;
+ } else {
+ I("hid probe success");
+ ts->hid_probe = true;
+ }
+}
+
+static int hx_hid_report_data_init(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ ts->touch_info_size = ts->hid_desc.max_input_length;
+ I("base touch_info_size = %d", ts->touch_info_size);
+ if (ts->ic_data->HX_STYLUS_FUNC) {
+ ts->touch_info_size += ts->hid_desc.max_input_length;
+ I("include stylus touch_info_size = %d", ts->touch_info_size);
+ }
+ ts->touch_all_size = ts->touch_info_size;
+
+ if (himax_report_data_init(ts) != 0) {
+ E("report data init fail");
+ ret = -ENOMEM;
+ }
+
+ return ret;
+}
+
+static void himax_boot_upgrade(struct work_struct *work)
+{
+ struct himax_ts_data *ts = container_of(work, struct himax_ts_data,
+ work_boot_upgrade.work);
+
+ I("Entering");
+ ts->ic_boot_done = false;
+
+ if (hx_chk_flash_sts(ts, ts->ic_data->flash_size) == 1) {
+ E("check flash fail, please upgrade FW");
+ goto END;
+ } else {
+ g_core_fp.fp_reload_disable(ts, 0);
+ g_core_fp.fp_power_on_init(ts);
+ g_core_fp.fp_read_FW_ver(ts);
+ g_core_fp.fp_tp_info_check(ts);
+ }
+END:
+ ts->ic_boot_done = true;
+ himax_int_enable(ts, true);
+
+}
+
+static void hx_hid_update(struct work_struct *work)
+{
+ struct himax_ts_data *ts = container_of(work, struct himax_ts_data,
+ work_hid_update.work);
+
+ himax_int_enable(ts, false);
+
+ if (ts->hid_req_cfg.input_RD_de == 0) {
+ himax_boot_upgrade(&ts->work_boot_upgrade.work);
+ } else {
+ if (hx_hid_rd_init(ts) == 0) {
+ I("hid rd init success");
+ hx_hid_register(ts);
+ if (ts->hid_probe)
+ hx_hid_report_data_init(ts);
+ }
+ himax_int_enable(ts, true);
+ }
+}
+
+int himax_report_data_init(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ kfree(ts->hx_rawdata_buf);
+ ts->hx_rawdata_buf = NULL;
+
+ ts->hx_rawdata_buf = kzalloc(ts->touch_info_size, GFP_KERNEL);
+ if (!ts->hx_rawdata_buf) {
+ E("ts->hx_rawdata_buf kzalloc failed!");
+ ret = -ENOMEM;
+ goto fail_1;
+ }
+
+ return 0;
+fail_1:
+
+ return ret;
+}
+
+static void himax_report_data_deinit(struct himax_ts_data *ts)
+{
+ kfree(ts->hx_rawdata_buf);
+ ts->hx_rawdata_buf = NULL;
+}
+
+
+static int himax_chip_suspend(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ if (ts->suspended) {
+ I("Already suspended, skip...");
+ goto END;
+ } else {
+ ts->suspended = true;
+ }
+
+ I("enter");
+ g_core_fp.fp_suspend_proc(ts, ts->suspended);
+
+ himax_int_enable(ts, false);
+
+ if (!ts->use_irq) {
+ s32 cancel_state;
+
+ cancel_state = cancel_work_sync(&ts->work);
+ if (cancel_state)
+ himax_int_enable(ts, true);
+ }
+
+ atomic_set(&ts->suspend_mode, 1);
+
+ if (ts->pdata) {
+ if (ts->pdata->power_off_3v3) {
+ if (ts->pdata->vcca_supply)
+ ret = regulator_disable(ts->pdata->vcca_supply);
+ }
+ }
+
+END:
+ hx_hid_remove(ts);
+ I("END");
+
+ return ret;
+}
+
+static int himax_chip_resume(struct himax_ts_data *ts)
+{
+ int ret = 0;
+
+ if (!ts->suspended && ts->resume_success) {
+ I("Already resumed, skip...");
+ goto END;
+ } else {
+ ts->suspended = false;
+ }
+ ts->resume_success = false;
+
+ I("enter");
+ /* continuous N times record, not total N times. */
+ ts->excp_zero_event_count = 0;
+
+ atomic_set(&ts->suspend_mode, 0);
+ if (ts->pdata) {
+ if (ts->pdata->power_off_3v3) {
+ if (ts->pdata->vcca_supply)
+ ret = regulator_enable(ts->pdata->vcca_supply);
+ }
+ }
+
+ g_core_fp.fp_resume_proc(ts, ts->suspended);
+ // hx_report_all_leave_event(ts);
+ if (ts->resume_success) {
+ hx_hid_probe(ts);
+ himax_int_enable(ts, true);
+ } else {
+ E("resume failed!");
+ ret = -ECANCELED;
+ }
+END:
+ I("END");
+
+ return ret;
+}
+
+int himax_suspend(struct device *dev)
+{
+ struct himax_ts_data *ts = dev_get_drvdata(dev);
+
+ I("enter");
+ if (!ts->initialized) {
+ E("init not ready, skip!");
+ return -ECANCELED;
+ }
+ himax_chip_suspend(ts);
+ return 0;
+}
+
+int himax_resume(struct device *dev)
+{
+ int ret = 0;
+ struct himax_ts_data *ts = dev_get_drvdata(dev);
+
+ I("enter");
+ /*
+ * wait until device resume for TDDI
+ * TDDI: Touch and display Driver IC
+ */
+ if (!ts->initialized) {
+#if !defined(CONFIG_FB)
+ if (himax_chip_init(ts))
+ return -ECANCELED;
+#else
+ E("init not ready, skip!");
+ return -ECANCELED;
+#endif
+ }
+ ret = himax_chip_resume(ts);
+ if (ret < 0) {
+ E("resume failed!");
+ I("retry resume");
+ schedule_delayed_work(&ts->work_resume_delayed_work,
+ msecs_to_jiffies(ts->pdata->ic_resume_delay));
+ // I("try int rescue");
+ // himax_int_enable(ts, 1);
+ }
+
+ return ret;
+}
+
+static void himax_resume_work_func(struct work_struct *work)
+{
+ struct himax_ts_data *ts = NULL;
+
+ ts = container_of(work, struct himax_ts_data,
+ work_resume_delayed_work.work);
+ if (!ts) {
+ E("ts is NULL");
+ return;
+ }
+ himax_chip_resume(ts);
+}
+
+#if defined(CONFIG_PM_SLEEP)
+static const struct dev_pm_ops hx_hid_pm = {
+ .suspend = himax_suspend,
+ .resume = himax_resume,
+ .restore = himax_resume,
+};
+
+#define HX_HID_PM (&hx_hid_pm)
+#else
+#define HX_HID_PM NULL
+#endif
+
+#if defined(CONFIG_OF)
+static const struct of_device_id himax_match_table[] = {
+ { .compatible = "himax,hx83102j" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, himax_match_table);
+#define himax_match_table of_match_ptr(himax_match_table)
+#else
+#define himax_match_table NULL
+#endif
+
+
+#define hx_acpi_spi_table NULL
+
+
+int himax_chip_init(struct himax_ts_data *ts)
+{
+ int err = PROBE_FAIL;
+ struct himax_platform_data *pdata = ts->pdata;
+
+ ts->chip_max_dsram_size = 0;
+ ts->notouch_frame = 0;
+ ts->ic_notouch_frame = 0;
+
+ if (g_core_fp.fp_chip_init) {
+ g_core_fp.fp_chip_init(ts);
+ } else {
+ E("function point of chip_init is NULL!");
+ goto error_ic_init_failed;
+ }
+ g_core_fp.fp_touch_information(ts);
+
+ spin_lock_init(&ts->irq_lock);
+
+ if (himax_ts_register_interrupt(ts)) {
+ E("register interrupt failed");
+ goto err_register_interrupt_failed;
+ }
+
+ himax_int_enable(ts, false);
+
+ ts->himax_hid_debug_wq =
+ create_singlethread_workqueue("HX_hid_debug");
+ if (!ts->himax_hid_debug_wq) {
+ E("allocate himax_hid_debug_wq failed");
+ err = -ENOMEM;
+ goto err_hid_debug_wq_failed;
+ }
+ INIT_DELAYED_WORK(&ts->work_hid_update, hx_hid_update);
+
+ ts->himax_resume_delayed_work_wq =
+ create_singlethread_workqueue("HX_resume_delayed_work");
+ if (!ts->himax_resume_delayed_work_wq) {
+ E("allocate himax_resume_delayed_work_wq failed");
+ err = -ENOMEM;
+ goto err_resume_delayed_work_wq_failed;
+ }
+ INIT_DELAYED_WORK(&ts->work_resume_delayed_work, himax_resume_work_func);
+
+ g_core_fp.fp_calc_touch_data_size(ts);
+
+#if defined(CONFIG_OF)
+ pdata->cable_config[0] = 0xF0;
+ pdata->cable_config[1] = 0x00;
+#endif
+
+ ts->suspended = false;
+ ts->usb_connected = 0x00;
+ ts->cable_config = pdata->cable_config;
+ ts->initialized = true;
+ return 0;
+
+err_resume_delayed_work_wq_failed:
+ destroy_workqueue(ts->himax_hid_debug_wq);
+err_hid_debug_wq_failed:
+ himax_ts_unregister_interrupt(ts);
+err_register_interrupt_failed:
+error_ic_init_failed:
+ ts->probe_fail_flag = 1;
+ return err;
+}
+
+static void himax_chip_deinit(struct himax_ts_data *ts)
+{
+ kfree(ts->zf_update_cfg_buffer);
+ ts->zf_update_cfg_buffer = NULL;
+
+ himax_ts_unregister_interrupt(ts);
+
+ himax_report_data_deinit(ts);
+
+ cancel_delayed_work_sync(&ts->work_resume_delayed_work);
+ destroy_workqueue(ts->himax_resume_delayed_work_wq);
+ destroy_workqueue(ts->himax_hid_debug_wq);
+
+ ts->probe_fail_flag = 0;
+
+ I("Common section deinited!");
+}
+
+static void himax_platform_deinit(struct himax_ts_data *ts)
+{
+ struct himax_platform_data *pdata = NULL;
+
+ I("entering");
+
+ if (!ts) {
+ E("ts is NULL");
+ return;
+ }
+
+ pdata = ts->pdata;
+ if (!pdata) {
+ E("pdata is NULL");
+ return;
+ }
+
+ himax_gpio_power_deconfig(pdata);
+
+ kfree(ts->ic_data);
+ ts->ic_data = NULL;
+
+ kfree(pdata);
+ pdata = NULL;
+ ts->pdata = NULL;
+
+ kfree(ts->xfer_buff);
+ ts->xfer_buff = NULL;
+
+ I("exit");
+}
+
+static bool himax_platform_init(struct himax_ts_data *ts,
+ struct himax_platform_data *local_pdata)
+{
+ struct himax_platform_data *pdata;
+
+ I("entering");
+ ts->xfer_buff = kcalloc
+ (HX_FULL_STACK_RAWDATA_SIZE, sizeof(u8), GFP_KERNEL);
+ if (!ts->xfer_buff) {
+ E("xfer_buff alloc fail, exit!");
+ goto err_xfer_buff_fail;
+ }
+
+ I("PDATA START");
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) { /*Allocate Platform data space*/
+ E("pdata alloc fail, exit!");
+ goto err_dt_platform_data_fail;
+ }
+
+ I("ts->ic_data START");
+ ts->ic_data = kzalloc(sizeof(*ts->ic_data), GFP_KERNEL);
+ if (!ts->ic_data) { /*Allocate IC data space*/
+ E("ic_data alloc fail, exit!");
+ goto err_dt_ic_data_fail;
+ }
+ memset(ts->ic_data, 0xFF, sizeof(struct himax_ic_data));
+ /* default 128k, different size please follow HX83121A style */
+ ts->ic_data->flash_size = 131072;
+
+ memcpy(pdata, local_pdata, sizeof(struct himax_platform_data));
+ ts->pdata = pdata;
+ pdata->ts = ts;
+ ts->rst_gpio = pdata->gpio_reset;
+
+ if (himax_gpio_power_config(ts, pdata) < 0) {
+ E("gpio config fail, exit!");
+ goto err_power_config_failed;
+ }
+
+ I("Completed.");
+
+ return true;
+
+err_power_config_failed:
+ kfree(ts->ic_data);
+ ts->ic_data = NULL;
+err_dt_ic_data_fail:
+ kfree(pdata);
+ pdata = NULL;
+err_dt_platform_data_fail:
+ kfree(ts->xfer_buff);
+ ts->xfer_buff = NULL;
+err_xfer_buff_fail:
+ return false;
+}
+
+static struct himax_ts_data *get_ts(struct device *dev)
+{
+ struct list_head *listptr = NULL;
+ struct himax_ts_data *ts = NULL;
+ struct himax_ts_data *tmp_ts = NULL;
+
+ if (!g_himax_ts->dev ||
+ g_himax_ts->dev == dev) {
+ D("Found 1st device : %p", dev);
+ return g_himax_ts;
+ }
+
+ D("Matching for device %p", dev);
+ list_for_each(listptr, &g_himax_ts->list) {
+ tmp_ts = list_entry(listptr, struct himax_ts_data, list);
+ if (tmp_ts->dev == dev) {
+ ts = tmp_ts;
+ break;
+ }
+ }
+ if (!ts)
+ D("No matching device found");
+
+ return ts;
+}
+
+static int himax_parse_dt(struct device_node *dt, struct himax_platform_data *pdata)
+{
+ /* pid_fw_name size = length of default_fw_name + length of "_XXXX" +
+ * length of ".bin" + null terminator.
+ */
+ static char pid_fw_name[ARRAY_SIZE(default_fw_name) + 5 + 4 + 1] = {0};
+ int tmp = 0;
+ const int pid_prop_args = 2;
+ u32 data = 0;
+ int id_gpios[8] = {0};
+ int counter = 0;
+ int i = 0;
+ s16 id_value = -1;
+ int dts_irq = 0;
+ int err = 0;
+
+ UNUSED(default_fw_name);
+ if (!dt || !pdata) {
+ E("DT: dev or pdata is NULL");
+ return -EINVAL;
+ }
+
+ dts_irq = of_irq_get(dt, 0);
+ D("DT: dts_irq = %d", dts_irq);
+ if (dts_irq <= 0) {
+ if (dts_irq == -EPROBE_DEFER)
+ E("DT: dts_irq = -EPROBE_DEFER");
+ return -EIO;
+ }
+
+ pdata->of_irq = dts_irq;
+ pdata->gpio_irq = -1;
+
+ pdata->gpio_reset = of_get_named_gpio(dt, "reset-gpios", 0);
+ if (!gpio_is_valid(pdata->gpio_reset)) {
+ I(" DT:gpio-rst value is not valid");
+ return -EIO;
+ }
+
+ I(" DT:interrupt=%d, reset=%d",
+ pdata->of_irq, pdata->gpio_reset);
+ counter = gpiod_count(pdata->ts->dev, "himax,id");
+ if (counter > 0) {
+ for (i = 0 ; i < counter ; i++) {
+ id_gpios[i] = of_get_named_gpio(dt, "himax,id-gpios", i);
+ if (!gpio_is_valid(id_gpios[i])) {
+ I(" DT:gpio-id value is not valid");
+ return -EIO;
+ }
+ I(" DT:gpio-id[%d]=%d", i, id_gpios[i]);
+ }
+ id_value = 0;
+ for (i = 0 ; i < counter ; i++) {
+ gpio_direction_input(id_gpios[i]);
+ id_value |= gpio_get_value(id_gpios[i]) << i;
+ }
+ I(" DT:gpio-id value=%04X", id_value);
+ pdata->panel_id = id_value;
+ } else {
+ pdata->panel_id = -1;
+ D(" DT:gpio-id not found");
+ }
+
+ // himax,ic_det_delay unit is millisecond
+ if (of_property_read_u32(dt, "himax,ic-det-delay-ms", &data)) {
+ pdata->ic_det_delay = 0;
+ D(" DT:himax,ic-det-delay-ms not found");
+ } else {
+ pdata->ic_det_delay = data;
+ I(" DT:himax,ic-det-delay-ms=%d", pdata->ic_det_delay);
+ }
+
+ // himax,ic_resume_delay unit is millisecond
+ if (of_property_read_u32(dt, "himax,ic-resume-delay-ms", &data)) {
+ pdata->ic_resume_delay = 0;
+ D(" DT:himax,ic-resume-delay-ms not found");
+ } else {
+ pdata->ic_resume_delay = data;
+ I(" DT:himax,ic-resume-delay-ms=%d", pdata->ic_resume_delay);
+ }
+
+ if (of_property_read_bool(dt, "himax,has-flash")) {
+ pdata->is_zf = false;
+ D(" DT:himax,has-flash");
+ } else {
+ pdata->is_zf = true;
+ I(" DT:himax,has-flash not found, load firmware from file");
+ }
+
+ if (of_property_read_bool(dt, "vccd-supply")) {
+ pdata->vccd_supply = regulator_get(pdata->ts->dev, "vccd");
+ if (IS_ERR(pdata->vccd_supply)) {
+ E(" DT:failed to get vccd supply");
+ err = PTR_ERR(pdata->vccd_supply);
+ pdata->vccd_supply = NULL;
+ return err;
+ }
+ I(" DT:vccd-supply=%p", pdata->vccd_supply);
+ } else {
+ pdata->vccd_supply = NULL;
+ }
+
+ if (of_property_read_bool(dt, "vcca-supply")) {
+ pdata->vcca_supply = regulator_get(pdata->ts->dev, "vcca");
+ if (IS_ERR(pdata->vcca_supply)) {
+ E(" DT:failed to get vcca supply");
+ err = PTR_ERR(pdata->vcca_supply);
+ pdata->vcca_supply = NULL;
+ return err;
+ }
+ I(" DT:vcca-supply=%p", pdata->vcca_supply);
+ } else {
+ pdata->vcca_supply = NULL;
+ }
+
+ /*
+ * check himax,pid first, if exist then check if it is single.
+ * Single case: himax,pid = <0x1002>; // 0x1002 is pid value
+ * Multiple case: himax,pid = <id_value0 00x1001>, <id_value1 0x1002>;
+ * When id_value >= 0, check the mapping listed to use the pid value.
+ */
+ if (of_get_property(dt, "himax,pid", &data)) {
+ counter = data / (sizeof(u32) * pid_prop_args);
+
+ if (!counter) {
+ // default case, no id->pid mappings
+ if (of_property_read_u32(dt, "himax,pid", &data)) {
+ pdata->pid = 0;
+ D(" DT:himax,pid not found");
+ goto GET_PID_END;
+ } else {
+ goto GET_PID_VALUE;
+ }
+ }
+
+ if (id_value < 0) {
+ E(" DT:himax,pid has no matched for id_value=%04X", id_value);
+ pdata->pid = 0;
+ goto GET_PID_END;
+ }
+
+ for (i = 0; i < counter; i++) {
+ if (of_property_read_u32_index(dt, "himax,pid",
+ i * pid_prop_args, &tmp)) {
+ D(" DT:himax,pid parsing error!");
+ pdata->pid = 0;
+ goto GET_PID_END;
+ }
+
+ if (of_property_read_u32_index(dt, "himax,pid",
+ i * pid_prop_args + 1, &data)) {
+ D(" DT:himax,pid parsing error!");
+ pdata->pid = 0;
+ goto GET_PID_END;
+ }
+
+ if (tmp == id_value) {
+ I(" DT:himax,pid mapping: id=%04X => pid=%04X, matched!",
+ tmp, data);
+ i = counter;
+ } else {
+ I(" DT:himax,pid mapping: id=%04X => pid=%04X", tmp, data);
+ }
+ }
+
+ if (counter == i) {
+ E(" DT:himax,pid has no matched for id_value=%04X", id_value);
+ pdata->pid = 0;
+ goto GET_PID_END;
+ }
+
+GET_PID_VALUE:
+ g_fw_boot_upgrade_name = pid_fw_name;
+ pdata->pid = data;
+ snprintf(pid_fw_name, sizeof(pid_fw_name), "%s_%04X%s",
+ BOOT_UPGRADE_FWNAME, pdata->pid, ".bin");
+ I(" DT:himax,pid=%04X, fw_name=%s",
+ pdata->pid, pid_fw_name);
+ } else {
+ pdata->pid = 0;
+ D(" DT:himax,pid not found");
+ }
+GET_PID_END:
+
+ return 0;
+}
+
+
+static int himax_spi_drv_probe(struct spi_device *spi)
+{
+ struct himax_ts_data *ts = NULL;
+ int ret = 0;
+ bool bret = false;
+ static struct himax_platform_data pdata = {0};
+#if defined(CONFIG_HID_HIMAX)
+ struct time_var current_time;
+#endif
+
+ ts = get_ts(&spi->dev);
+ if (!ts) {
+ // non exist, create new one
+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+ if (!ts) {
+ E("allocate himax_ts_data failed");
+ ret = -ENOMEM;
+ goto err_alloc_data_failed;
+ }
+ list_add_tail(&ts->list, &g_himax_ts->list);
+ I("Allocated himax_ts_data for new device %p", &spi->dev);
+ ts->dev = &spi->dev;
+ }
+ if (ts == g_himax_ts)
+ ts->dev = &spi->dev;
+#if defined(CONFIG_HID_HIMAX)
+ if ((ts->deferred_start.tv_sec != 0 ||
+ ts->deferred_start.tv_nsec != 0) && ts->ic_det_delay) {
+ time_func(¤t_time);
+ if (time_diff(&ts->deferred_start, ¤t_time) <
+ ts->ic_det_delay) {
+ D("delay time not reach, defer probe");
+ return -EPROBE_DEFER;
+ }
+ I("delay time reach, probe again!");
+ }
+#endif
+ D("Enter");
+ if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) {
+ E("Full duplex not supported by host");
+ return -EIO;
+ }
+ pdata.ts = ts;
+ ts->dev = &spi->dev;
+
+#if defined(CONFIG_OF)
+ if (himax_parse_dt(spi->dev.of_node, &pdata) < 0) {
+ E(" parse OF data failed!");
+ if (ts != g_himax_ts) {
+ list_del(&ts->list);
+ kfree(ts);
+ D("free ts %p of dev %p", ts, &spi->dev);
+ } else {
+ ts->dev = NULL;
+ }
+ return -ENODEV;
+ }
+#endif
+
+#if defined(CONFIG_HID_HIMAX)
+ if (pdata.ic_det_delay > 0) {
+ if (ts->deferred_start.tv_sec == 0 &&
+ ts->deferred_start.tv_nsec == 0) {
+ I("delay %d ms for IC detect",
+ pdata.ic_det_delay);
+ ts->ic_det_delay = pdata.ic_det_delay;
+ time_func(&ts->deferred_start);
+ return -EPROBE_DEFER;
+ }
+ }
+#endif
+
+ ts->xfer_data = kzalloc(BUS_RW_MAX_LEN, GFP_KERNEL);
+ if (!ts->xfer_data) {
+ E("allocate xfer_data failed");
+ ret = -ENOMEM;
+ goto err_alloc_xfer_data_failed;
+ }
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_3;
+ spi->chip_select = 0;
+
+ ts->spi = spi;
+ mutex_init(&ts->rw_lock);
+ mutex_init(&ts->reg_lock);
+ mutex_init(&ts->hid_ioctl_lock);
+ dev_set_drvdata(&spi->dev, ts);
+ spi_set_drvdata(spi, ts);
+
+ ts->probe_finish = false;
+ ts->initialized = false;
+ ts->ic_boot_done = false;
+ bret = himax_platform_init(ts, &pdata);
+ if (!bret) {
+ E("platform init failed");
+ ret = -ENODEV;
+ goto error_platform_init_failed;
+ }
+ ts->ic_data->has_flash = !pdata.is_zf;
+
+ bret = g_core_fp.fp_chip_detect(ts);
+ if (!bret) {
+ E("IC detect failed");
+ ret = -ENODEV;
+ goto error_ic_detect_failed;
+ }
+
+ ret = himax_chip_init(ts);
+ if (ret < 0)
+ goto err_init_failed;
+
+#if defined(CONFIG_FB)
+ ts->himax_att_wq = create_singlethread_workqueue("HMX_ATT_request");
+ if (!ts->himax_att_wq) {
+ E(" allocate himax_att_wq failed");
+ ret = -ENOMEM;
+ goto err_get_intr_bit_failed;
+ }
+
+ INIT_DELAYED_WORK(&ts->work_att, himax_fb_register);
+ queue_delayed_work(ts->himax_att_wq, &ts->work_att,
+ msecs_to_jiffies(0));
+#endif
+
+ ts->himax_pwr_wq = create_singlethread_workqueue("HMX_PWR_request");
+ if (!ts->himax_pwr_wq) {
+ E(" allocate himax_pwr_wq failed");
+ ret = -ENOMEM;
+ goto err_create_pwr_wq_failed;
+ }
+
+ INIT_DELAYED_WORK(&ts->work_pwr, himax_pwr_register);
+ queue_delayed_work(ts->himax_pwr_wq, &ts->work_pwr,
+ msecs_to_jiffies(0));
+
+ ts->probe_finish = true;
+ I("%s, End\n", __func__);
+ return ret;
+
+err_create_pwr_wq_failed:
+#if defined(CONFIG_FB)
+ cancel_delayed_work_sync(&ts->work_att);
+ destroy_workqueue(ts->himax_att_wq);
+err_get_intr_bit_failed:
+#endif
+ himax_chip_deinit(ts);
+err_init_failed:
+error_ic_detect_failed:
+ himax_platform_deinit(ts);
+error_platform_init_failed:
+ kfree(ts->xfer_data);
+ ts->xfer_data = NULL;
+err_alloc_xfer_data_failed:
+ if (ts != g_himax_ts)
+ list_del(&ts->list);
+ kfree(ts);
+ ts = NULL;
+err_alloc_data_failed:
+
+ return ret;
+}
+
+static void himax_spi_drv_remove(struct spi_device *spi)
+{
+ struct himax_ts_data *ts = spi_get_drvdata(spi);
+
+ if (ts->probe_finish) {
+ if (ts->ic_boot_done) {
+ himax_int_enable(ts, false);
+
+ if (ts->hid_probe) {
+ hx_hid_remove(ts);
+ ts->hid_probe = false;
+ }
+
+ kfree(ts->hid_rd_data.rd_data);
+ ts->hid_rd_data.rd_data = NULL;
+
+ ts->ic_boot_done = false;
+ }
+ power_supply_unreg_notifier(&ts->power_notif);
+ cancel_delayed_work_sync(&ts->work_pwr);
+ destroy_workqueue(ts->himax_pwr_wq);
+ #if defined(CONFIG_FB)
+ if (fb_unregister_client(&ts->fb_notif))
+ E("Err occur while unregister fb_noti.");
+ cancel_delayed_work_sync(&ts->work_att);
+ destroy_workqueue(ts->himax_att_wq);
+ #endif
+ himax_chip_deinit(ts);
+ himax_platform_deinit(ts);
+ ts->pdata = NULL;
+ kfree(ts->ovl_idx);
+ ts->ovl_idx = NULL;
+ kfree(ts->xfer_data);
+ ts->xfer_data = NULL;
+ ts->probe_fail_flag = 0;
+ if (ts != g_himax_ts) {
+ list_del(&ts->list);
+ kfree(ts);
+ ts = NULL;
+ }
+ }
+ spi_set_drvdata(spi, NULL);
+ I("completed.");
+}
+
+static void print_config(void)
+{
+#if !defined(CONFIG_HID_HIMAX)
+ D("Himax module defined.");
+#endif
+#if defined(CONFIG_DRM_ROCKCHIP)
+ D("CONFIG_DRM_ROCKCHIP defined.");
+#endif
+#if defined(CONFIG_FB)
+ D("CONFIG_FB defined.");
+#endif
+#if defined(CONFIG_OF)
+ D("CONFIG_OF defined.");
+#endif
+#if defined(BUS_R_DLEN)
+ D("BUS_R_DLEN defined : %d.", BUS_R_DLEN);
+#endif
+#if defined(BUS_W_DLEN)
+ D("BUS_W_DLEN defined : %d.", BUS_W_DLEN);
+#endif
+#if defined(BOOT_UPGRADE_FWNAME)
+ D("BOOT_UPGRADE_FWNAME defined : %s.", BOOT_UPGRADE_FWNAME);
+#endif
+#if defined(HIMAX_DRIVER_VER)
+ D("HIMAX_DRIVER_VER defined : %s.", HIMAX_DRIVER_VER);
+#endif
+#if defined(HX_HID_PM)
+ D("HX_HID_PM defined.");
+#endif
+}
+static struct spi_driver himax_hid_over_spi_driver = {
+ .driver = {
+ .name = himax_dev_name,
+ .owner = THIS_MODULE,
+ .pm = HX_HID_PM,
+ .of_match_table = himax_match_table,
+ .acpi_match_table = hx_acpi_spi_table,
+ },
+ .probe = himax_spi_drv_probe,
+ .remove = himax_spi_drv_remove,
+};
+void himax_spi_drv_exit(void)
+{
+ if (g_himax_ts) {
+ spi_unregister_driver(&himax_hid_over_spi_driver);
+ kfree(g_himax_ts);
+ g_himax_ts = NULL;
+ I("Free g_himax_ts");
+ }
+}
+
+static int himax_spi_drv_init(struct himax_ts_data *ts)
+{
+ int ret;
+
+ I("Himax touch panel driver for HID init");
+ print_config();
+ ret = spi_register_driver(&himax_hid_over_spi_driver);
+
+ return ret;
+}
+
+static int __init himax_ic_init(void)
+{
+ int ret = 0;
+ // set default regs
+ himax_ic_reg_init(&g_core_regs);
+ himax_ic_fp_init();
+ // basic struct init
+ g_himax_ts = kzalloc(sizeof(*g_himax_ts), GFP_KERNEL);
+ if (!g_himax_ts) {
+ E("allocate himax_ts_data failed");
+ ret = -ENOMEM;
+ goto err_alloc_data_failed;
+ }
+ INIT_LIST_HEAD(&g_himax_ts->list);
+ // init ic specific params
+ himax_para_init(g_himax_ts);
+
+ // add to ic module list
+ ret = himax_spi_drv_init(g_himax_ts);
+ if (ret) {
+ E("himax_spi_drv_init failed");
+ kfree(g_himax_ts);
+ g_himax_ts = NULL;
+ }
+
+err_alloc_data_failed:
+ return ret;
+}
+
+static void __exit himax_ic_exit(void)
+{
+ himax_spi_drv_exit();
+}
+
+#if !defined(CONFIG_HID_HIMAX)
+module_init(himax_ic_init);
+#else
+late_initcall(himax_ic_init);
+#endif
+module_exit(himax_ic_exit);
+
+MODULE_DESCRIPTION("Himax SPI driver for HID simulator for " HX83102J_ID);
+MODULE_AUTHOR("Himax, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(HIMAX_DRIVER_VER);
diff --git a/drivers/hid/hid-himax-83102j.h b/drivers/hid/hid-himax-83102j.h
new file mode 100644
index 000000000000..41e4c9577fe5
--- /dev/null
+++ b/drivers/hid/hid-himax-83102j.h
@@ -0,0 +1,923 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __HX_IC_83102J_H__
+#define __HX_IC_83102J_H__
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/acpi.h>
+#include <linux/spi/spi.h>
+#include <linux/hid.h>
+#include <linux/sizes.h>
+#include <linux/fs.h>
+#include <linux/gpio.h>
+#include <linux/types.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/proc_fs.h>
+#include <linux/firmware.h>
+#include <linux/stddef.h>
+#include <linux/power_supply.h>
+
+#define HIMAX_DRIVER_VER "1.0.0"
+
+#define HIMAX_BUS_RETRY_TIMES 3
+#define BUS_RW_MAX_LEN 0x20006
+#define BUS_R_HLEN 3
+#define BUS_R_DLEN ((BUS_RW_MAX_LEN - BUS_R_HLEN) - ((BUS_RW_MAX_LEN - BUS_R_HLEN) % 4))
+#define BUS_W_HLEN 2
+#define BUS_W_DLEN ((BUS_RW_MAX_LEN - BUS_W_HLEN) - ((BUS_RW_MAX_LEN - BUS_W_HLEN) % 4))
+#define FIX_HX_INT_IS_EDGE (false)
+
+#define HX_DELAY_BOOT_UPDATE (2000)
+#define HID_REG_SZ_MAX (1 + 4 + 1 + 4 + 256)
+
+enum HID_ID_FUNCT {
+ ID_CONTACT_COUNT = 0x03,
+};
+
+#define HID_RAW_DATA_TYPE_DELTA (0x09)
+#define HID_RAW_DATA_TYPE_RAW (0x0A)
+#define HID_RAW_DATA_TYPE_BASELINE (0x0B)
+#define HID_RAW_DATA_TYPE_NORMAL (0x00)
+
+enum HID_FW_UPDATE_STATUS_CODE {
+ FWUP_ERROR_NO_ERROR = 0x77,
+ FWUP_ERROR_MCU_00 = 0x00,
+ FWUP_ERROR_MCU_A0 = 0xA0,
+ FWUP_ERROR_NO_BL = 0xC1,
+ FWUP_ERROR_NO_MAIN = 0xC2,
+ FWUP_ERROR_BL_COMPLETE = 0xB1,
+ FWUP_ERROR_BL = 0xB2,
+ FWUP_ERROR_PW = 0xB3,
+ FWUP_ERROR_ERASE_FLASH = 0xB4,
+ FWUP_ERROR_FLASH_PROGRAMMING = 0xB5,
+ FWUP_ERROR_NO_DEVICE = 0xFFFFFF00,
+ FWUP_ERROR_LOAD_FW_BIN = 0xFFFFFF01,
+ FWUP_ERROR_INITIAL = 0xFFFFFF02,
+ FWUP_ERROR_POLLING_TIMEOUT = 0xFFFFFF03,
+ FWUP_ERROR_FW_TRANSFER = 0xFFFFFF04
+};
+
+struct himax_ts_data;
+union host_ext_rd_t;
+union heatmap_rd_t;
+
+#define HID_FW_UPDATE_BL_CMD (0x77)
+#define HID_FW_UPDATE_MAIN_CMD (0x55)
+
+int hx_hid_probe(struct himax_ts_data *ts);
+void hx_hid_remove(struct himax_ts_data *ts);
+
+void hx_hid_update_info(struct himax_ts_data *ts);
+int hx_hid_report(const struct himax_ts_data *ts, u8 *data, s32 len);
+
+enum fix_touch_info {
+ FIX_HX_RX_NUM = 48,
+ FIX_HX_TX_NUM = 32,
+ FIX_HX_BT_NUM = 0,
+ FIX_HX_MAX_PT = 10,
+ FIX_HX_STYLUS_FUNC = 1,
+ FIX_HX_STYLUS_ID_V2 = 0,
+ FIX_HX_STYLUS_RATIO = 1,
+ HX_STACK_ORG_LEN = 128
+};
+
+#define himax_dev_name "hx_spi_hid_tp"
+
+#if defined(CONFIG_FB)
+#include <linux/notifier.h>
+#include <linux/fb.h>
+#endif
+
+/* log macro */
+#define I(fmt, arg...) pr_info("[HXTP][%s]: " fmt "\n", __func__, ##arg)
+#define W(fmt, arg...) pr_warn("[HXTP][WARNING][%s]: " fmt "\n", __func__, ##arg)
+#define E(fmt, arg...) pr_err("[HXTP][ERROR][%s]: " fmt "\n", __func__, ##arg)
+#define D(fmt, arg...) pr_debug("[HXTP][DEBUG][%s]: " fmt "\n", __func__, ##arg)
+
+#define himax_dev_name "hx_spi_hid_tp"
+
+#define BOOT_UPGRADE_FWNAME "himax_i2chid"
+
+#define MPAP_FWNAME "himax_mpfw.bin"
+
+#define UNUSED(x) ((void)(x))
+static const char default_fw_name[] = BOOT_UPGRADE_FWNAME;
+
+#define DATA_LEN_4 4
+#define ADDR_LEN_4 4
+#define MAX_I2C_TRANS_SZ 128
+#define HIMAX_REG_RETRY_TIMES 5
+#define FW_PAGE_SZ 128
+#define HX1K 0x400
+#define HX_48K_SZ 0xC000
+#define HX64K 0x10000
+
+#define HX_RW_REG_FAIL (-1)
+
+#define hx83102j_fw_addr_raw_out_sel 0x100072EC
+#define hx83102j_ic_adr_tcon_rst 0x80020004
+#define hx83102j_data_adc_num 400 /* 200x2 */
+#define hx83102j_notouch_frame 0
+#define HX83102J_FLASH_SIZE 261120
+#define HX83102j_ic_addr_hw_crc 0x80010000
+#define HX83102j_data_hw_crc 0x0000ECCE
+
+/* CORE_IC */
+ #define ic_adr_ahb_addr_byte_0 0x00
+ #define ic_adr_ahb_rdata_byte_0 0x08
+ #define ic_adr_ahb_access_direction 0x0c
+ #define ic_adr_conti 0x13
+ #define ic_adr_incr4 0x0D
+ #define ic_adr_i2c_psw_lb 0x31
+ #define ic_adr_i2c_psw_ub 0x32
+ #define ic_cmd_ahb_access_direction_read 0x00
+ #define ic_cmd_conti 0x31
+ #define ic_cmd_incr4 0x10
+ #define ic_cmd_i2c_psw_lb 0x27
+ #define ic_cmd_i2c_psw_ub 0x95
+ #define ic_adr_tcon_on_rst 0x80020020
+ #define ic_adr_cs_central_state 0x900000A8
+/* CORE_IC */
+/* CORE_FW */
+ #define fw_addr_system_reset 0x90000018
+ #define fw_addr_ctrl_fw 0x9000005c
+ #define fw_addr_flag_reset_event 0x900000e4
+ #define fw_usb_detect_addr 0x10007F38
+ #define fw_addr_raw_out_sel 0x800204b4
+ #define fw_addr_reload_status 0x80050000
+ #define fw_addr_reload_crc32_result 0x80050018
+ #define fw_addr_reload_addr_from 0x80050020
+ #define fw_addr_reload_addr_cmd_beat 0x80050028
+ #define fw_data_system_reset 0x00000055
+ #define fw_data_safe_mode_release_pw_reset 0x00000000
+ #define fw_data_clear 0x00000000
+ #define fw_data_fw_stop 0x000000A5
+ #define fw_addr_set_frame_addr 0x10007294
+ #define fw_addr_sorting_mode_en 0x10007f04
+ #define fw_addr_fw_ver_addr 0x10007004
+ #define fw_addr_fw_cfg_addr 0x10007084
+ #define fw_addr_fw_vendor_addr 0x10007000
+ #define fw_addr_cus_info 0x10007008
+ #define fw_addr_proj_info 0x10007014
+ #define fw_addr_fw_dbg_msg_addr 0x10007f40
+ #define fw_addr_chk_fw_status 0x900000a8
+ #define fw_addr_chk_dd_status 0x900000E8
+ #define fw_addr_ap_notify_fw_sus 0x10007FD0
+ #define fw_data_ap_notify_fw_sus_en 0xA55AA55A
+ #define fw_data_ap_notify_fw_sus_dis 0x00000000
+ #define fw_addr_event_addr 0x30
+ #define fw_func_handshaking_pwd 0xA55AA55A
+ #define fw_func_handshaking_end 0x77887788
+ #define fw_addr_ulpm_33 0x33
+ #define fw_addr_ulpm_34 0x34
+ #define fw_data_ulpm_11 0x11
+ #define fw_data_ulpm_22 0x22
+ #define fw_data_ulpm_33 0x33
+ #define fw_data_ulpm_aa 0xAA
+ #define fw_addr_ctrl_mpap_ovl 0x100073EC
+ #define fw_data_ctrl_mpap_ovl_on 0x107380
+/* CORE_FW */
+/* CORE_FLASH */
+ #define flash_addr_ctrl_base 0x80000000
+ #define flash_addr_spi200_data (flash_addr_ctrl_base + 0x2c)
+/* CORE_FLASH */
+/* CORE_SRAM */
+ #define sram_adr_mkey 0x100070E8
+ #define sram_adr_rawdata_addr 0x10000000
+ #define sram_passwrd_start 0x5AA5
+ #define sram_passwrd_end 0xA55A
+/* CORE_SRAM */
+/* CORE_DRIVER */
+ #define driver_addr_fw_define_flash_reload 0x10007f00
+ #define driver_addr_fw_define_2nd_flash_reload 0x100072c0
+ #define driver_addr_fw_define_int_is_edge 0x10007088
+ #define driver_addr_fw_define_rxnum_txnum 0x100070f4
+ #define driver_addr_fw_define_maxpt_xyrvs 0x100070f8
+ #define driver_addr_fw_define_x_y_res 0x100070fc
+/* CORE_DRIVER */
+ #define zf_data_dis_flash_reload 0x00009AA9
+ #define zf_addr_system_reset 0x90000018
+ #define zf_data_system_reset 0x00000055
+ #define zf_data_sram_start_addr 0x08000000
+ #define zf_data_cfg_info 0x10007000
+ #define zf_data_fw_cfg_1 0x10007084
+ #define zf_data_fw_cfg_2 0x10007264
+ #define zf_data_fw_cfg_3 0x10007300
+ #define zf_data_adc_cfg_1 0x10006A00
+ #define zf_data_adc_cfg_2 0x10007B28
+ #define zf_data_adc_cfg_3 0x10007AF0
+ #define zf_data_map_table 0x10007500
+ #define ovl_section_num 3
+ #define ovl_border_reply 0x66
+ #define ovl_sorting_reply 0xAA
+ #define ovl_fault 0xFF
+ #define ovl_alg_request 0x11111111
+ #define ovl_alg_reply 0x22222222
+
+ #define time_var timespec64
+ #define time_var_fine tv_nsec
+ #define time_var_fine_unit (1000 * 1000)
+ #define time_func ktime_get_real_ts64
+ #define owner_line
+
+ #define HX_TP_BIN_CHECKSUM_CRC 3
+
+ #define FW_SIZE_255k 261120
+
+ #define HX83102J_ID "HX83102J"
+
+ /* origin is 20/50 */
+ #define RST_LOW_PERIOD_S 5000
+ #define RST_LOW_PERIOD_E 5100
+ #define RST_HIGH_PERIOD_ZF_S 5000
+ #define RST_HIGH_PERIOD_ZF_E 5100
+ #define RST_HIGH_PERIOD_S 50000
+ #define RST_HIGH_PERIOD_E 50100
+enum data_type {
+ HX_REG = 0xA5,
+ HX_DATA
+};
+
+struct hx_reg_t {
+ union {
+ u32 word;
+ u16 half[2];
+ u8 byte[4];
+ } data;
+ u32 len;
+ u32 data_type;
+};
+
+struct data_pack_t {
+ union {
+ u32 *word;
+ u16 *half;
+ u8 *byte;
+ void *ptr;
+ } data;
+ /* length in byte unit */
+ u32 len;
+ u32 data_type;
+};
+
+#define BYTE_REG(_reg, _data) \
+ { \
+ _reg.data.byte[0] = (_data) & 0xFF; \
+ _reg.len = 1; \
+ _reg.data_type = HX_REG; \
+ }
+#define HALF_REG(_reg, _data) \
+ { \
+ _reg.data.half[0] = cpu_to_le16((_data) & 0xFFFF); \
+ _reg.len = 2; \
+ _reg.data_type = HX_REG; \
+ }
+#define WORD_REG(_reg, _data) \
+ { \
+ _reg.data.word = cpu_to_le32(_data); \
+ _reg.len = 4; \
+ _reg.data_type = HX_REG; \
+ }
+
+// set val to already defined reg/data
+#define VAL_SET(_var, _val) \
+ ({ \
+ bool _ret = true; \
+ do { \
+ if (_var.data_type == HX_DATA) { \
+ memset(_var.data.byte, 0, _var.len); \
+ do { \
+ switch (_var.len) { \
+ case 1: \
+ _var.data.byte[0] = (_val) & 0xFF; \
+ break; \
+ case 2: \
+ _var.data.half[0] = cpu_to_le16((_val) & 0xFFFF); \
+ break; \
+ case 3: \
+ _var.data.half[0] = cpu_to_le16((_val) & 0xFFFF); \
+ _var.data.byte[2] = ((_val) >> 16) & 0xFF; \
+ break; \
+ case 4: \
+ _var.data.word[0] =\
+ cpu_to_le32((_val) & 0xFFFFFFFF); \
+ break; \
+ default: \
+ _ret = false; \
+ break; \
+ };\
+ } while (0); \
+ } else { \
+ _ret = false; \
+ } \
+ } while (0); \
+ _ret; \
+ })
+
+// set ptr/array to already defined reg/data
+#define PTR_SET(_var, _ptr, _len) \
+ ({ \
+ bool _ret = true; \
+ do { \
+ if ((_len) > (_var).len) { \
+ _ret = false; \
+ break; \
+ } \
+ memcpy((_var).data.byte, _ptr, (_len)); \
+ (_var).len = (_len); \
+ } while (0); \
+ _ret; \
+ })
+
+#define DEF_WORD_DATA(_data_name) \
+ u8 _data_name##_array[4] = {0}; \
+ struct data_pack_t _data_name = { \
+ .data.byte = _data_name##_array, \
+ .len = 4, \
+ .data_type = HX_DATA \
+ }
+
+#define ARRAY_DATA(_data, _byte_len) { \
+ _data.data.byte = (uint8_t *)_data, \
+ _data.len = _byte_len, \
+ .data_type = HX_DATA \
+ }
+
+#define REG_GET_VAL(_reg) \
+ ({ \
+ u32 _val = 0; \
+ do { \
+ switch (_reg.len) { \
+ case 1: \
+ _val = _reg.data.byte[0]; \
+ break; \
+ case 2: \
+ _val = le16_to_cpu(_reg.data.half[0]); \
+ break; \
+ case 3: \
+ _val = le16_to_cpu(_reg.data.half[0]) | (_reg.data.byte[2] << 16); \
+ break; \
+ case 4: \
+ _val = le32_to_cpu(_reg.data.word); \
+ break; \
+ } \
+ } while (0); \
+ _val; \
+ })
+
+struct ic_operation {
+ struct hx_reg_t addr_ahb_addr_byte_0;
+ struct hx_reg_t addr_ahb_rdata_byte_0;
+ struct hx_reg_t addr_ahb_access_direction;
+ struct hx_reg_t addr_conti;
+ struct hx_reg_t addr_incr4;
+ struct hx_reg_t adr_i2c_psw_lb;
+ struct hx_reg_t adr_i2c_psw_ub;
+ struct hx_reg_t data_ahb_access_direction_read;
+ struct hx_reg_t data_conti;
+ struct hx_reg_t data_incr4;
+ struct hx_reg_t data_i2c_psw_lb;
+ struct hx_reg_t data_i2c_psw_ub;
+ struct hx_reg_t addr_tcon_on_rst;
+ struct hx_reg_t addr_cs_central_state;
+};
+
+struct fw_operation {
+ struct hx_reg_t addr_system_reset;
+ struct hx_reg_t addr_ctrl_fw_isr;
+ struct hx_reg_t addr_flag_reset_event;
+ struct hx_reg_t addr_raw_out_sel;
+ struct hx_reg_t addr_reload_status;
+ struct hx_reg_t addr_reload_crc32_result;
+ struct hx_reg_t addr_reload_addr_from;
+ struct hx_reg_t addr_reload_addr_cmd_beat;
+ struct hx_reg_t addr_set_frame_addr;
+ struct hx_reg_t addr_sorting_mode_en;
+ struct hx_reg_t addr_fw_ver_addr;
+ struct hx_reg_t addr_fw_cfg_addr;
+ struct hx_reg_t addr_fw_vendor_addr;
+ struct hx_reg_t addr_cus_info;
+ struct hx_reg_t addr_proj_info;
+ struct hx_reg_t addr_ap_notify_fw_sus;
+ struct hx_reg_t data_ap_notify_fw_sus_en;
+ struct hx_reg_t data_ap_notify_fw_sus_dis;
+ struct hx_reg_t data_system_reset;
+ struct hx_reg_t data_clear;
+ struct hx_reg_t data_fw_stop;
+ struct hx_reg_t addr_event_addr;
+ struct hx_reg_t addr_usb_detect;
+};
+
+struct sram_operation {
+ struct hx_reg_t addr_mkey;
+ struct hx_reg_t addr_rawdata_addr;
+ struct hx_reg_t passwrd_start;
+ struct hx_reg_t passwrd_end;
+};
+
+struct driver_operation {
+ struct hx_reg_t addr_fw_define_flash_reload;
+ struct hx_reg_t addr_fw_define_2nd_flash_reload;
+ struct hx_reg_t addr_fw_define_int_is_edge;
+ struct hx_reg_t addr_fw_define_rxnum_txnum;
+ struct hx_reg_t addr_fw_define_maxpt_xyrvs;
+ struct hx_reg_t addr_fw_define_x_y_res;
+
+};
+
+struct zf_operation {
+ struct hx_reg_t data_dis_flash_reload;
+ struct hx_reg_t addr_system_reset;
+ struct hx_reg_t data_system_reset;
+ struct hx_reg_t data_sram_start_addr;
+ struct hx_reg_t data_sram_clean;
+ struct hx_reg_t data_cfg_info;
+ struct hx_reg_t data_fw_cfg_1;
+ struct hx_reg_t data_fw_cfg_2;
+ struct hx_reg_t data_fw_cfg_3;
+ struct hx_reg_t data_adc_cfg_1;
+ struct hx_reg_t data_adc_cfg_2;
+ struct hx_reg_t data_adc_cfg_3;
+ struct hx_reg_t data_map_table;
+};
+
+struct flash_version_info {
+ struct hx_reg_t addr_fw_ver_major;
+ struct hx_reg_t addr_fw_ver_minor;
+ struct hx_reg_t addr_cfg_ver_major;
+ struct hx_reg_t addr_cfg_ver_minor;
+ struct hx_reg_t addr_cid_ver_major;
+ struct hx_reg_t addr_cid_ver_minor;
+ struct hx_reg_t addr_cfg_table;
+ struct hx_reg_t addr_cfg_table_t;
+ struct hx_reg_t addr_hid_table;
+ struct hx_reg_t addr_hid_desc;
+ struct hx_reg_t addr_hid_rd_desc;
+};
+
+struct himax_core_command_regs {
+ struct flash_version_info flash_ver_info;
+ struct ic_operation ic_op;
+ struct fw_operation fw_op;
+ struct sram_operation sram_op;
+ struct driver_operation driver_op;
+ struct zf_operation zf_op;
+};
+struct hx_hid_rd_data_t {
+ u8 *rd_data;
+ u32 rd_length;
+};
+union hx_dword_data_t {
+ u32 dword;
+ u8 byte[4];
+};
+
+enum hid_reg_action {
+ REG_READ = 0,
+ REG_WRITE = 1
+};
+
+enum hid_reg_types {
+ REG_TYPE_EXT_AHB,
+ REG_TYPE_EXT_SRAM,
+ REG_TYPE_EXT_TYPE = 0xFFFFFFFF
+};
+
+struct rd_feature_unit_t {
+ u8 id_tag;
+ u8 id;
+ u8 usage_tag;
+ u8 usage;
+ u8 report_cnt_tag;
+ u16 report_cnt;
+ u8 feature_tag[2];
+} __packed;
+struct hx_hid_req_cfg_t {
+ u32 processing_id;
+ u32 data_type;
+ u32 self_test_type;
+ u32 handshake_set;
+ u32 handshake_get;
+ struct firmware *fw;
+ u32 current_size;
+ // HID REG READ/WRITE format:
+ // STANDARD TYPE
+ // [ID:1][READ/WRITE:1][REG_ADDR:4][REG_DATA:4] : 10 bytes
+ // 0 1 2~5 6~9
+ // EXT TYPE
+ // [ID:1][READ/WRITE:1][0xFFFFFFFF][REG_TYPE:1][REG_ADDR:1|4][REG_DATA:1~256]
+ // 0 1 2~5 6 7|7~10 8~263|11~266
+ union hx_dword_data_t reg_addr;
+ u32 reg_addr_sz;
+ u8 reg_data[HID_REG_SZ_MAX - 1 - 4];
+ u32 reg_data_sz;
+ u32 input_RD_de;
+};
+
+enum cell_type {
+ CHIP_IS_ON_CELL,
+ CHIP_IS_IN_CELL
+};
+
+#define HX_FULL_STACK_RAWDATA_SIZE \
+ (HX_STACK_ORG_LEN +\
+ (2 + FIX_HX_RX_NUM * FIX_HX_TX_NUM + FIX_HX_TX_NUM + FIX_HX_RX_NUM)\
+ * 2)
+
+struct himax_ic_data {
+ int vendor_fw_ver;
+ int vendor_config_ver;
+ int vendor_touch_cfg_ver;
+ int vendor_display_cfg_ver;
+ int vendor_cid_maj_ver;
+ int vendor_cid_min_ver;
+ int vendor_panel_ver;
+ int vendor_sensor_id;
+ int ic_adc_num;
+ u8 vendor_cus_info[12];
+ u8 vendor_proj_info[12];
+ u32 flash_size;
+ u32 HX_RX_NUM;
+ u32 HX_TX_NUM;
+ u32 HX_BT_NUM;
+ u32 HX_X_RES;
+ u32 HX_Y_RES;
+ u32 HX_MAX_PT;
+ u8 HX_INT_IS_EDGE;
+ u8 HX_STYLUS_FUNC;
+ u8 HX_STYLUS_ID_V2;
+ u8 HX_STYLUS_RATIO;
+ u32 icid;
+ bool enc16bits;
+ bool has_flash;
+};
+
+enum HX_TS_PATH {
+ HX_REPORT_COORD = 1,
+ HX_REPORT_COORD_RAWDATA,
+};
+
+enum HX_TS_STATUS {
+ HX_TS_GET_DATA_FAIL = -4,
+ HX_EXCP_EVENT,
+ HX_CHKSUM_FAIL,
+ HX_PATH_FAIL,
+ HX_TS_NORMAL_END = 0,
+ HX_EXCP_REC_OK,
+ HX_READY_SERVE,
+ HX_REPORT_DATA,
+ HX_EXCP_WARNING,
+ HX_IC_RUNNING,
+ HX_ZERO_EVENT_COUNT,
+ HX_RST_OK,
+};
+
+enum HX_ERROR_CODE {
+ NO_ERR = 0,
+ READY_TO_SERVE = 1,
+ WORK_OUT = 2,
+ HX_EMBEDDED_FW = 3,
+ BUS_FAIL = -1,
+ HX_INIT_FAIL = -1,
+ MEM_ALLOC_FAIL = -2,
+ CHECKSUM_FAIL = -3,
+ GESTURE_DETECT_FAIL = -4,
+ INPUT_REGISTER_FAIL = -5,
+ FW_NOT_READY = -6,
+ LENGTH_FAIL = -7,
+ OPEN_FILE_FAIL = -8,
+ PROBE_FAIL = -9,
+ ERR_WORK_OUT = -10,
+ ERR_STS_WRONG = -11,
+ ERR_TEST_FAIL = -12,
+ HW_CRC_FAIL = 1
+};
+
+struct himax_platform_data {
+ struct himax_ts_data *ts;
+ u16 pid;
+ bool power_off_3v3;
+ u8 cable_config[2];
+ int gpio_irq;
+ int of_irq;
+ int gpio_reset;
+ int ic_det_delay;
+ int ic_resume_delay;
+ int panel_id;
+ bool is_zf;
+ struct regulator *vccd_supply;
+ struct regulator *vcca_supply;
+};
+
+struct hx_hid_fw_unit_t {
+ u8 cmd;
+ u16 bin_start_offset;
+ u16 unit_sz;
+} __packed;
+
+struct hx_bin_desc_t {
+ u16 passwd;
+ u16 cid;
+ u8 panel_ver;
+ u16 fw_ver;
+ u8 ic_sign;
+ char customer[12];
+ char project[12];
+ char fw_major[12];
+ char fw_minor[12];
+ char date[12];
+ char ic_sign_2[12];
+} __packed;
+
+struct hx_hid_desc_t {
+ u16 desc_length;
+ u16 bcd_version;
+ u16 report_desc_length;
+ u16 max_input_length;
+ u16 max_output_length;
+ u16 max_fragment_length;
+ u16 vendor_id;
+ u16 product_id;
+ u16 version_id;
+ u16 flags;
+ u32 reserved;
+} __packed;
+struct hx_hid_info_t {
+ struct hx_hid_fw_unit_t main_mapping[9];
+ struct hx_hid_fw_unit_t bl_mapping;
+ struct hx_bin_desc_t fw_bin_desc;
+ u16 vid;
+ u16 pid;
+ u8 cfg_info[32];
+ u8 cfg_version;
+ u8 disp_version;
+ u8 rx;
+ u8 tx;
+ u16 yres;
+ u16 xres;
+ u8 pt_num;
+ u8 mkey_num;
+ u8 debug_info[78];
+} __packed;
+
+struct himax_ts_data {
+ bool initialized;
+ bool probe_finish;
+ bool suspended;
+ s32 notouch_frame;
+ s32 ic_notouch_frame;
+ atomic_t suspend_mode;
+ u8 x_channel;
+ u8 y_channel;
+ char chip_name[30];
+ u8 chip_cell_type;
+ u32 chip_max_dsram_size;
+ u32 ic_checksum_type;
+ bool ic_boot_done;
+ u32 probe_fail_flag;
+ u8 *xfer_data;
+ struct himax_ic_data *ic_data;
+
+ int touch_all_size;
+ int touch_info_size;
+
+ u8 *hx_rawdata_buf;
+ bool boot_upgrade_flag;
+ const struct firmware *hxfw;
+ bool has_alg_overlay;
+ u8 *ovl_idx;
+ bool zf_update_flag;
+ u8 *zf_update_cfg_buffer;
+#if defined(CONFIG_HID_HIMAX)
+ struct time_var deferred_start;
+ unsigned int ic_det_delay;
+#endif
+
+ u8 n_finger_support;
+ u8 irq_enabled;
+
+ u32 debug_log_level;
+
+ s32 rst_gpio;
+ s32 use_irq;
+ s32 (*power)(s32 on);
+
+ struct device *dev;
+ struct workqueue_struct *himax_wq;
+ struct work_struct work;
+
+ struct hrtimer timer;
+ struct i2c_client *client;
+ struct himax_platform_data *pdata;
+ /* mutex lock for reg access */
+ struct mutex reg_lock;
+ /* mutex lock for read/write action */
+ struct mutex rw_lock;
+ /* mutex lock for hid ioctl action */
+ struct mutex hid_ioctl_lock;
+ atomic_t irq_state;
+ /* spin lock for irq */
+ spinlock_t irq_lock;
+
+/******* SPI-start *******/
+ struct spi_device *spi;
+ s32 hx_irq;
+ u8 *xfer_buff;
+/******* SPI-end *******/
+
+ struct hid_device *hid;
+ struct hx_hid_desc_t hid_desc;
+ struct hx_hid_rd_data_t hid_rd_data;
+ struct hx_hid_info_t hid_info;
+ struct hx_hid_req_cfg_t hid_req_cfg;
+ struct hx_bin_desc_t fw_bin_desc;
+ bool hid_probe;
+ bool resume_success;
+
+ s32 in_self_test;
+ s32 suspend_resume_done;
+ s32 bus_speed;
+
+ s32 excp_reset_active;
+ s32 excp_eb_event_flag;
+ s32 excp_ec_event_flag;
+ s32 excp_ed_event_flag;
+ s32 excp_zero_event_count;
+
+#if defined(CONFIG_FB)
+ struct notifier_block fb_notif;
+ struct workqueue_struct *himax_att_wq;
+ struct delayed_work work_att;
+#endif
+
+ struct notifier_block power_notif;
+ struct workqueue_struct *himax_pwr_wq;
+ struct delayed_work work_pwr;
+
+ struct workqueue_struct *himax_boot_upgrade_wq;
+ struct delayed_work work_boot_upgrade;
+
+ struct workqueue_struct *himax_hid_debug_wq;
+ struct delayed_work work_hid_update;
+ u8 usb_connected;
+ u8 *cable_config;
+ u8 latest_power_status;
+
+ struct workqueue_struct *himax_resume_delayed_work_wq;
+ struct delayed_work work_resume_delayed_work;
+
+ u8 slave_write_reg;
+ u8 slave_read_reg;
+ bool acc_slave_reg;
+ bool select_slave_reg;
+ struct list_head list;
+};
+struct himax_core_fp {
+/* CORE_IC */
+ void (*fp_burst_enable)(struct himax_ts_data *ts, u8 auto_add_4_byte);
+ int (*fp_register_read)(struct himax_ts_data *ts, u8 *addr,
+ u8 *buf, u32 len);
+ int (*fp_reg_read)(struct himax_ts_data *ts, struct hx_reg_t *addr,
+ struct data_pack_t *data);
+ int (*fp_register_write)(struct himax_ts_data *ts, u8 *addr,
+ u8 *val, u32 len);
+ int (*fp_reg_write)(struct himax_ts_data *ts, struct hx_reg_t *addr,
+ struct data_pack_t *data);
+ void (*fp_interface_on)(struct himax_ts_data *ts);
+ void (*fp_sense_on)(struct himax_ts_data *ts, u8 flash_mode);
+ bool (*fp_sense_off)(struct himax_ts_data *ts, bool check_en);
+ void (*fp_power_on_init)(struct himax_ts_data *ts);
+/* CORE_IC */
+
+/* CORE_FW */
+ void (*fp_system_reset)(struct himax_ts_data *ts);
+ void (*fp_usb_detect_set)(struct himax_ts_data *ts,
+ const u8 *cable_config);
+ void (*fp_diag_register_set)(struct himax_ts_data *ts,
+ u8 diag_command);
+ void (*fp_reload_disable)(struct himax_ts_data *ts, int disable);
+ void (*fp_read_FW_ver)(struct himax_ts_data *ts);
+ void (*fp_read_FW_status)(struct himax_ts_data *ts);
+ void (*fp_irq_switch)(struct himax_ts_data *ts, int switch_on);
+ int (*fp_assign_sorting_mode)(struct himax_ts_data *ts, u8 *tmp_data);
+ void (*fp_ap_notify_fw_sus)(struct himax_ts_data *ts, int suspend);
+/* CORE_FW */
+/* CORE_FLASH */
+ int (*fp_diff_overlay_flash)(struct himax_ts_data *ts);
+/* CORE_FLASH */
+/* CORE_DRIVER */
+ bool (*fp_chip_detect)(struct himax_ts_data *ts);
+ void (*fp_chip_init)(struct himax_ts_data *ts);
+ void (*fp_pin_reset)(struct himax_ts_data *ts);
+ void (*fp_ic_reset)(struct himax_ts_data *ts,
+ u8 loadconfig, u8 int_off);
+ u8 (*fp_tp_info_check)(struct himax_ts_data *ts);
+ void (*fp_touch_information)(struct himax_ts_data *ts);
+ void (*fp_calc_touch_data_size)(struct himax_ts_data *ts);
+ int (*fp_ic_excp_recovery)(struct himax_ts_data *ts,
+ u32 hx_excp_event,
+ u32 hx_zero_event, u32 length);
+ void (*fp_excp_ic_reset)(struct himax_ts_data *ts);
+ void (*fp_resend_cmd_func)(struct himax_ts_data *ts, bool suspended);
+ bool (*fp_read_event_stack)(struct himax_ts_data *ts, u8 *buf,
+ u32 length);
+ void (*fp_suspend_proc)(struct himax_ts_data *ts, bool suspended);
+ void (*fp_resume_proc)(struct himax_ts_data *ts, bool suspended);
+/* CORE_DRIVER */
+/* INSPECTION*/
+/* INSPECTION*/
+};
+
+#define FLASH_VER_GET_VAL(_reg) REG_GET_VAL(g_core_regs.flash_ver_info._reg)
+#define IC_GET_VAL(_reg) REG_GET_VAL(g_core_regs.ic_op._reg)
+#define FW_GET_VAL(_reg) REG_GET_VAL(g_core_regs.fw_op._reg)
+#define FLASH_GET_VAL(_reg) REG_GET_VAL(g_core_regs.flash_op._reg)
+#define SRAM_GET_VAL(_reg) REG_GET_VAL(g_core_regs.sram_op._reg)
+#define DRV_GET_VAL(_reg) REG_GET_VAL(g_core_regs.driver_op._reg)
+#define ZF_GET_VAL(_reg) REG_GET_VAL(g_core_regs.zf_op._reg)
+#define REG_GET_ARRAY(_reg) \
+ ({ \
+ _reg.data.byte; \
+ })
+#define FLASH_VER_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.flash_ver_info._reg)
+#define IC_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.ic_op._reg)
+#define FW_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.fw_op._reg)
+#define FLASH_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.flash_op._reg)
+#define SRAM_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.sram_op._reg)
+#define DRV_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.driver_op._reg)
+#define ZF_GET_ARRAY(_reg) REG_GET_ARRAY(g_core_regs.zf_op._reg)
+#define REG_GET_SZ(_reg) \
+ ({ \
+ _reg.len; \
+ })
+#define FLASH_VER_GET_SZ(_reg) REG_GET_SZ(g_core_regs.flash_ver_info._reg)
+#define IC_GET_SZ(_reg) REG_GET_SZ(g_core_regs.ic_op._reg)
+#define FW_GET_SZ(_reg) REG_GET_SZ(g_core_regs.fw_op._reg)
+#define FLASH_GET_SZ(_reg) REG_GET_SZ(g_core_regs.flash_op._reg)
+#define SRAM_GET_SZ(_reg) REG_GET_SZ(g_core_regs.sram_op._reg)
+#define DRV_GET_SZ(_reg) REG_GET_SZ(g_core_regs.driver_op._reg)
+#define ZF_GET_SZ(_reg) REG_GET_SZ(g_core_regs.zf_op._reg)
+void himax_rst_gpio_set(int pinnum, u8 value);
+void himax_cable_detect_func(struct himax_ts_data *ts, bool force_renew);
+int himax_report_data_init(struct himax_ts_data *ts);
+
+int himax_bus_read(struct himax_ts_data *ts, u8 cmd, u8 *buf,
+ u32 len);
+int himax_bus_write(struct himax_ts_data *ts, u8 cmd, u8 *addr,
+ u8 *data, u32 len);
+
+void himax_int_enable(struct himax_ts_data *ts, int enable);
+
+union host_ext_rd_t {
+ struct __packed rd_struct_t {
+ u8 header[14];
+ struct rd_feature_unit_t cfg;// ID_CFG
+ struct rd_feature_unit_t reg_rw;// ID_REG_RW
+ struct rd_feature_unit_t monitor_sel;// ID_TOUCH_MONITOR_SEL
+ struct rd_feature_unit_t monitor;// ID_TOUCH_MONITOR
+ // rd_feature_unit_t monitor_partial;// ID_TOUCH_MONITOR_PARTIAL
+ struct rd_feature_unit_t fw_update;// ID_FW_UPDATE
+ struct rd_feature_unit_t fw_update_handshaking;// ID_FW_UPDATE_HANDSHAKING
+ struct rd_feature_unit_t self_test;// ID_SELF_TEST
+ struct rd_feature_unit_t input_rd_en;// ID_INPUT_RD_DE
+ u8 end_collection;
+ } rd_struct;
+ u8 host_report_descriptor[sizeof(struct rd_struct_t)];
+};
+
+union heatmap_rd_t {
+ struct __packed heatmap_struct_t {
+ u8 header[17];
+ u8 heatmap_info_desc[29];
+ u8 heatmap_data_hdr[9];
+ u8 heatmap_data_cnt_tag;
+ u16 heatmap_data_cnt;
+ u8 heatmap_input_desc[2];
+ u8 end_collection;
+ } heatmap_struct;
+ u8 host_report_descriptor[sizeof(struct heatmap_struct_t)];
+};
+
+/* FW Auto upgrade case, you need to setup the fix_touch_info of module
+ */
+
+#define HID_REPORT_HDR_SZ (2)
+void himax_ts_work(struct himax_ts_data *ts);
+enum hrtimer_restart himax_ts_timer_func(struct hrtimer *timer);
+int himax_resume(struct device *dev);
+int himax_suspend(struct device *dev);
+
+// int himax_spi_drv_init(struct himax_ts_data *ts);
+void himax_spi_drv_exit(void);
+int himax_chip_init(struct himax_ts_data *ts);
+int himax_report_data_init(struct himax_ts_data *ts);
+void himax_cable_detect_func(struct himax_ts_data *ts, bool force_renew);
+#endif
--
2.34.1
^ permalink raw reply related
* Re: [PATCH v1 1/2] dt-bindings: input: Add Himax HX83102J touchscreen
From: Krzysztof Kozlowski @ 2023-12-06 10:37 UTC (permalink / raw)
To: Allen_Lin, dmitry.torokhov, robh+dt, krzysztof.kozlowski+dt,
conor+dt, jikos, benjamin.tissoires, linux-input, devicetree,
linux-kernel
In-Reply-To: <TY0PR06MB56116A355D2A5BF665FA0D899E85A@TY0PR06MB5611.apcprd06.prod.outlook.com>
On 05/12/2023 11:05, Allen_Lin wrote:
> Add the HX83102j touchscreen device tree bindings documents.
>
> Signed-off-by: Allen_Lin <allencl_lin@hotmail.com>
> ---
> .../bindings/input/himax,hx8310xx.yaml | 70 +++++++++++++++++++
> MAINTAINERS | 6 ++
> 2 files changed, 76 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/himax,hx8310xx.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/himax,hx8310xx.yaml b/Documentation/devicetree/bindings/input/himax,hx8310xx.yaml
> new file mode 100644
> index 000000000000..1cc65e9bd267
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/himax,hx8310xx.yaml
Filename like compatible, so himax,hx83102j.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/himax,hx8310xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: himax hx8310xx touchscreen
Himax? HiMax? lowercase "himax" seems wrong and your commit msg also
suggest different capitalization. The same for "hx8310xx". And it is not
"xx" but 2J.
> +
> +maintainers:
> + - Allen Lin <allencl_lin@hotmail.com>
> +
> +description:
> + Supports the himax hx8310xx touchscreen.
Drop sentence, instead describe hardware like "Himax HX83102J is a
touchscreen connected over SPI ...."
> + This touchscreen uses the spi-hid protocol but has some non-standard
> + power sequencing required.
> +
> +allOf:
> + - $ref: /schemas/input/touchscreen/touchscreen.yaml#
Missing ref to spi-peripheral-props
> +
> +properties:
> + compatible:
> + enum:
> + - himax,hx83102j
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + reset-gpios:
> + maxItems: 1
> +
> + spi-cpha: true
> +
> + spi-cpol: true
> +
> + spi-max-frequency: true
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - reset-gpios
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,rpmh.h>
Why? Drop
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hid_himax_spi@0 {
No underscores in node names.
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + pinctrl-names = "default";
> + pinctrl-0 = <&touch_int0 &touch_reset>;
> + reg = <0>;
Oh damn... ok, so compatible is always the first property. Reg is second.
> + spi-max-frequency = <12500000>;
> + status = "okay";
Drop
> + compatible = "himax,hx83102j";
> + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> + spi-cpha;
> + spi-cpol;
> + interrupt-parent = <&gpio1>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + };
> + };
Best regards,
Krzysztof
^ permalink raw reply
* [PATCH v2 00/15] selftests/hid: tablets fixes
From: Benjamin Tissoires @ 2023-12-06 10:45 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires, Shuah Khan, Peter Hutterer
Cc: linux-input, linux-kselftest, linux-kernel, Benjamin Tissoires
Hi,
the main trigger of this series was the XP-Pen issue[0].
Basically, the tablets tests were good-ish but couldn't
handle that tablet both in terms of emulation or in terms
of detection of issues.
So rework the tablets test a bit to be able to include the
XP-Pen patch later, once I have a kernel fix for it (right
now I only have a HID-BPF fix, meaning that the test will
fail if I include them).
Also, vmtest.sh needed a little bit of care, because
boot2container moved, and I made it easier to reuse in a CI
environment.
Cheers,
Benjamin
Note: I got the confirmation off-list from Peter that his
rev-by applied to the whole series.
[0] https://lore.kernel.org/all/nycvar.YFH.7.76.2311012033290.29220@cbobk.fhfr.pm/
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
---
Changes in v2:
- took Peter's review into account
- Added a few patches to make mypy and ruff happy given that
I had to add a couple of type hints here and there
- Link to v1: https://lore.kernel.org/r/20231129-wip-selftests-v1-0-ba15a1fe1b0d@kernel.org
---
Benjamin Tissoires (15):
selftests/hid: vmtest.sh: update vm2c and container
selftests/hid: vmtest.sh: allow finer control on the build steps
selftests/hid: base: allow for multiple skip_if_uhdev
selftests/hid: tablets: remove unused class
selftests/hid: tablets: move the transitions to PenState
selftests/hid: tablets: move move_to function to PenDigitizer
selftests/hid: tablets: do not set invert when the eraser is used
selftests/hid: tablets: set initial data for tilt/twist
selftests/hid: tablets: define the elements of PenState
selftests/hid: tablets: add variants of states with buttons
selftests/hid: tablets: convert the primary button tests
selftests/hid: tablets: add a secondary barrel switch test
selftests/hid: tablets: be stricter for some transitions
selftests/hid: fix mypy complains
selftests/hid: fix ruff linter complains
tools/testing/selftests/hid/tests/base.py | 7 +-
tools/testing/selftests/hid/tests/test_mouse.py | 14 +-
tools/testing/selftests/hid/tests/test_tablet.py | 764 ++++++++++++++-------
.../selftests/hid/tests/test_wacom_generic.py | 6 +-
tools/testing/selftests/hid/vmtest.sh | 46 +-
5 files changed, 567 insertions(+), 270 deletions(-)
---
base-commit: 4ea4ed22b57846facd9cb4af5f67cb7bd2792cf3
change-id: 20231121-wip-selftests-001ac427e086
Best regards,
--
Benjamin Tissoires <bentiss@kernel.org>
^ permalink raw reply
* [PATCH v2 01/15] selftests/hid: vmtest.sh: update vm2c and container
From: Benjamin Tissoires @ 2023-12-06 10:45 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires, Shuah Khan, Peter Hutterer
Cc: linux-input, linux-kselftest, linux-kernel, Benjamin Tissoires
In-Reply-To: <20231206-wip-selftests-v2-0-c0350c2f5986@kernel.org>
boot2container is now on an official project, so let's use that.
The container image is now the same I use for the CI, so let's keep
to it.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
---
no changes in v2
---
tools/testing/selftests/hid/vmtest.sh | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/hid/vmtest.sh b/tools/testing/selftests/hid/vmtest.sh
index 4da48bf6b328..301b4e162336 100755
--- a/tools/testing/selftests/hid/vmtest.sh
+++ b/tools/testing/selftests/hid/vmtest.sh
@@ -19,12 +19,12 @@ esac
SCRIPT_DIR="$(dirname $(realpath $0))"
OUTPUT_DIR="$SCRIPT_DIR/results"
KCONFIG_REL_PATHS=("${SCRIPT_DIR}/config" "${SCRIPT_DIR}/config.common" "${SCRIPT_DIR}/config.${ARCH}")
-B2C_URL="https://gitlab.freedesktop.org/mupuf/boot2container/-/raw/master/vm2c.py"
+B2C_URL="https://gitlab.freedesktop.org/gfx-ci/boot2container/-/raw/main/vm2c.py"
NUM_COMPILE_JOBS="$(nproc)"
LOG_FILE_BASE="$(date +"hid_selftests.%Y-%m-%d_%H-%M-%S")"
LOG_FILE="${LOG_FILE_BASE}.log"
EXIT_STATUS_FILE="${LOG_FILE_BASE}.exit_status"
-CONTAINER_IMAGE="registry.freedesktop.org/libevdev/hid-tools/fedora/37:2023-02-17.1"
+CONTAINER_IMAGE="registry.freedesktop.org/bentiss/hid/fedora/39:2023-11-22.1"
TARGETS="${TARGETS:=$(basename ${SCRIPT_DIR})}"
DEFAULT_COMMAND="pip3 install hid-tools; make -C tools/testing/selftests TARGETS=${TARGETS} run_tests"
--
2.41.0
^ permalink raw reply related
* [PATCH v2 02/15] selftests/hid: vmtest.sh: allow finer control on the build steps
From: Benjamin Tissoires @ 2023-12-06 10:45 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires, Shuah Khan, Peter Hutterer
Cc: linux-input, linux-kselftest, linux-kernel, Benjamin Tissoires
In-Reply-To: <20231206-wip-selftests-v2-0-c0350c2f5986@kernel.org>
vmtest.sh works great for a one shot test, but not so much for CI where
I want to build (with different configs) the bzImage in a separate
job than the one I am running it.
Add a "build_only" option to specify whether we need to boot the currently
built kernel in the vm.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
---
changes in v2:
- fixed typo
---
tools/testing/selftests/hid/vmtest.sh | 42 ++++++++++++++++++++---------------
1 file changed, 24 insertions(+), 18 deletions(-)
diff --git a/tools/testing/selftests/hid/vmtest.sh b/tools/testing/selftests/hid/vmtest.sh
index 301b4e162336..db534e9099a8 100755
--- a/tools/testing/selftests/hid/vmtest.sh
+++ b/tools/testing/selftests/hid/vmtest.sh
@@ -32,7 +32,7 @@ DEFAULT_COMMAND="pip3 install hid-tools; make -C tools/testing/selftests TARGETS
usage()
{
cat <<EOF
-Usage: $0 [-i] [-s] [-d <output_dir>] -- [<command>]
+Usage: $0 [-j N] [-s] [-b] [-d <output_dir>] -- [<command>]
<command> is the command you would normally run when you are in
the source kernel direcory. e.g:
@@ -55,6 +55,7 @@ Options:
-u) Update the boot2container script to a newer version.
-d) Update the output directory (default: ${OUTPUT_DIR})
+ -b) Run only the build steps for the kernel and the selftests
-j) Number of jobs for compilation, similar to -j in make
(default: ${NUM_COMPILE_JOBS})
-s) Instead of powering off the VM, start an interactive
@@ -191,8 +192,9 @@ main()
local command="${DEFAULT_COMMAND}"
local update_b2c="no"
local debug_shell="no"
+ local build_only="no"
- while getopts ':hsud:j:' opt; do
+ while getopts ':hsud:j:b' opt; do
case ${opt} in
u)
update_b2c="yes"
@@ -207,6 +209,9 @@ main()
command="/bin/sh"
debug_shell="yes"
;;
+ b)
+ build_only="yes"
+ ;;
h)
usage
exit 0
@@ -226,8 +231,7 @@ main()
shift $((OPTIND -1))
# trap 'catch "$?"' EXIT
-
- if [[ "${debug_shell}" == "no" ]]; then
+ if [[ "${build_only}" == "no" && "${debug_shell}" == "no" ]]; then
if [[ $# -eq 0 ]]; then
echo "No command specified, will run ${DEFAULT_COMMAND} in the vm"
else
@@ -267,24 +271,26 @@ main()
update_kconfig "${kernel_checkout}" "${kconfig_file}"
recompile_kernel "${kernel_checkout}" "${make_command}"
+ update_selftests "${kernel_checkout}" "${make_command}"
- if [[ "${update_b2c}" == "no" && ! -f "${b2c}" ]]; then
- echo "vm2c script not found in ${b2c}"
- update_b2c="yes"
- fi
+ if [[ "${build_only}" == "no" ]]; then
+ if [[ "${update_b2c}" == "no" && ! -f "${b2c}" ]]; then
+ echo "vm2c script not found in ${b2c}"
+ update_b2c="yes"
+ fi
- if [[ "${update_b2c}" == "yes" ]]; then
- download $B2C_URL $b2c
- chmod +x $b2c
- fi
+ if [[ "${update_b2c}" == "yes" ]]; then
+ download $B2C_URL $b2c
+ chmod +x $b2c
+ fi
- update_selftests "${kernel_checkout}" "${make_command}"
- run_vm "${kernel_checkout}" $b2c "${kernel_bzimage}" "${command}"
- if [[ "${debug_shell}" != "yes" ]]; then
- echo "Logs saved in ${OUTPUT_DIR}/${LOG_FILE}"
- fi
+ run_vm "${kernel_checkout}" $b2c "${kernel_bzimage}" "${command}"
+ if [[ "${debug_shell}" != "yes" ]]; then
+ echo "Logs saved in ${OUTPUT_DIR}/${LOG_FILE}"
+ fi
- exit $(cat ${OUTPUT_DIR}/${EXIT_STATUS_FILE})
+ exit $(cat ${OUTPUT_DIR}/${EXIT_STATUS_FILE})
+ fi
}
main "$@"
--
2.41.0
^ permalink raw reply related
* [PATCH v2 03/15] selftests/hid: base: allow for multiple skip_if_uhdev
From: Benjamin Tissoires @ 2023-12-06 10:45 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires, Shuah Khan, Peter Hutterer
Cc: linux-input, linux-kselftest, linux-kernel, Benjamin Tissoires
In-Reply-To: <20231206-wip-selftests-v2-0-c0350c2f5986@kernel.org>
We can actually have multiple occurences of `skip_if_uhdev` if we follow
the information from the pytest doc[0].
This is not immediately used, but can be if we need multiple conditions
on a given test.
[0] https://docs.pytest.org/en/latest/historical-notes.html#update-marker-code
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
---
no changes in v2
---
tools/testing/selftests/hid/tests/base.py | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/tools/testing/selftests/hid/tests/base.py b/tools/testing/selftests/hid/tests/base.py
index 1305cfc9646e..5d9c26dfc460 100644
--- a/tools/testing/selftests/hid/tests/base.py
+++ b/tools/testing/selftests/hid/tests/base.py
@@ -238,8 +238,7 @@ class BaseTestCase:
try:
with HIDTestUdevRule.instance():
with new_uhdev as self.uhdev:
- skip_cond = request.node.get_closest_marker("skip_if_uhdev")
- if skip_cond:
+ for skip_cond in request.node.iter_markers("skip_if_uhdev"):
test, message, *rest = skip_cond.args
if test(self.uhdev):
--
2.41.0
^ permalink raw reply related
* [PATCH v2 04/15] selftests/hid: tablets: remove unused class
From: Benjamin Tissoires @ 2023-12-06 10:45 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires, Shuah Khan, Peter Hutterer
Cc: linux-input, linux-kselftest, linux-kernel, Benjamin Tissoires
In-Reply-To: <20231206-wip-selftests-v2-0-c0350c2f5986@kernel.org>
Looks like this is a leftover
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
---
no changes in v2
---
tools/testing/selftests/hid/tests/test_tablet.py | 4 ----
1 file changed, 4 deletions(-)
diff --git a/tools/testing/selftests/hid/tests/test_tablet.py b/tools/testing/selftests/hid/tests/test_tablet.py
index 303ffff9ee8d..cd9c1269afa6 100644
--- a/tools/testing/selftests/hid/tests/test_tablet.py
+++ b/tools/testing/selftests/hid/tests/test_tablet.py
@@ -133,10 +133,6 @@ class PenState(Enum):
return tuple()
-class Data(object):
- pass
-
-
class Pen(object):
def __init__(self, x, y):
self.x = x
--
2.41.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox