* [PATCH 1/1] HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write
From: Lee Jones @ 2026-03-17 16:24 UTC (permalink / raw)
To: lee, Filipe Laíns, Jiri Kosina, Benjamin Tissoires,
linux-input, linux-kernel
logi_dj_recv_send_report() assumes that all incoming REPORT_ID_DJ_SHORT
reports are 14 Bytes (DJREPORT_SHORT_LENGTH - 1) long. It uses that
assumption to load the associated field's 'value' array with 14 Bytes of
data. However, if a malicious user only sends say 1 Byte of data,
'report_count' will be 1 and only 1 Byte of memory will be allocated to
the 'value' Byte array. When we come to populate 'value[1-13]' we will
experience an OOB write.
Signed-off-by: Lee Jones <lee@kernel.org>
---
drivers/hid/hid-logitech-dj.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 44b716697510..885b986c7a12 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -1282,6 +1282,12 @@ static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
return -ENODEV;
}
+ if (report->maxfield < 1 || report->field[0]->report_count != DJREPORT_SHORT_LENGTH - 1) {
+ hid_err(hdev, "Expected size of dj report is %d, but got %d",
+ DJREPORT_SHORT_LENGTH - 1, report->field[0]->report_count);
+ return -EINVAL;
+ }
+
for (i = 0; i < DJREPORT_SHORT_LENGTH - 1; i++)
report->field[0]->value[i] = data[i];
--
2.53.0.851.ga537e3e6e9-goog
^ permalink raw reply related
* Re: [PATCH 1/1] HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write
From: Benjamin Tissoires @ 2026-03-17 16:42 UTC (permalink / raw)
To: Lee Jones; +Cc: Filipe Laíns, Jiri Kosina, linux-input, linux-kernel
In-Reply-To: <20260317162426.1533573-1-lee@kernel.org>
On Mar 17 2026, Lee Jones wrote:
> logi_dj_recv_send_report() assumes that all incoming REPORT_ID_DJ_SHORT
> reports are 14 Bytes (DJREPORT_SHORT_LENGTH - 1) long. It uses that
> assumption to load the associated field's 'value' array with 14 Bytes of
> data. However, if a malicious user only sends say 1 Byte of data,
> 'report_count' will be 1 and only 1 Byte of memory will be allocated to
> the 'value' Byte array. When we come to populate 'value[1-13]' we will
> experience an OOB write.
>
> Signed-off-by: Lee Jones <lee@kernel.org>
> ---
> drivers/hid/hid-logitech-dj.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
> index 44b716697510..885b986c7a12 100644
> --- a/drivers/hid/hid-logitech-dj.c
> +++ b/drivers/hid/hid-logitech-dj.c
> @@ -1282,6 +1282,12 @@ static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
> return -ENODEV;
> }
>
> + if (report->maxfield < 1 || report->field[0]->report_count != DJREPORT_SHORT_LENGTH - 1) {
This is all static information. So this should be checked in the
.probe(), once the device has been parsed, not for every single call of
logi_dj_recv_send_report().
Cheers,
Benjamin
> + hid_err(hdev, "Expected size of dj report is %d, but got %d",
> + DJREPORT_SHORT_LENGTH - 1, report->field[0]->report_count);
> + return -EINVAL;
> + }
> +
> for (i = 0; i < DJREPORT_SHORT_LENGTH - 1; i++)
> report->field[0]->value[i] = data[i];
>
> --
> 2.53.0.851.ga537e3e6e9-goog
>
>
^ permalink raw reply
* Re: [PATCH v8 0/3] TrackPoint doubletap enablement and user control
From: Ilpo Järvinen @ 2026-03-17 17:03 UTC (permalink / raw)
To: mpearson-lenovo, dmitry.torokhov, hmh, hansg, corbet,
derekjohn.clark, Vishnu Sankar
Cc: linux-input, linux-kernel, ibm-acpi-devel, linux-doc,
platform-driver-x86, vsankar
In-Reply-To: <20260311143144.482145-1-vishnuocv@gmail.com>
On Wed, 11 Mar 2026 23:31:41 +0900, Vishnu Sankar wrote:
> This patch series adds support for TrackPoint doubletap with a clear and
> simple separation of responsibilities between drivers:
>
> 1. Firmware enablement (trackpoint.c):
> Automatically enables doubletap on capable hardware during device
> detection.
>
> [...]
Thank you for your contribution, it has been applied to my local
review-ilpo-next branch. Note it will show up in the public
platform-drivers-x86/review-ilpo-next branch only once I've pushed my
local branch there, which might take a while.
The list of commits applied:
[1/3] input: trackpoint - Enable doubletap by default on capable devices
commit: 9a98ebe630cf13c1a6063afa676d1cecc44fb2c9
[2/3] platform/x86: thinkpad_acpi: Add sysfs control for TrackPoint double-tap
commit: 6227cc32fa01ffbf5bef8dcc6759743a28a2ad57
[3/3] Documentation: thinkpad-acpi - Document doubletap_enable attribute
commit: fa5062e99b984448b7c8ca9aea47e7fc033b6e2f
--
i.
^ permalink raw reply
* Re: [PATCH 1/1] HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write
From: Lee Jones @ 2026-03-17 17:20 UTC (permalink / raw)
To: Benjamin Tissoires
Cc: Filipe Laíns, Jiri Kosina, linux-input, linux-kernel
In-Reply-To: <abmEJJ9vWz5fiZy6@beelink>
On Tue, 17 Mar 2026, Benjamin Tissoires wrote:
> On Mar 17 2026, Lee Jones wrote:
> > logi_dj_recv_send_report() assumes that all incoming REPORT_ID_DJ_SHORT
> > reports are 14 Bytes (DJREPORT_SHORT_LENGTH - 1) long. It uses that
> > assumption to load the associated field's 'value' array with 14 Bytes of
> > data. However, if a malicious user only sends say 1 Byte of data,
> > 'report_count' will be 1 and only 1 Byte of memory will be allocated to
> > the 'value' Byte array. When we come to populate 'value[1-13]' we will
> > experience an OOB write.
> >
> > Signed-off-by: Lee Jones <lee@kernel.org>
> > ---
> > drivers/hid/hid-logitech-dj.c | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
> > index 44b716697510..885b986c7a12 100644
> > --- a/drivers/hid/hid-logitech-dj.c
> > +++ b/drivers/hid/hid-logitech-dj.c
> > @@ -1282,6 +1282,12 @@ static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
> > return -ENODEV;
> > }
> >
> > + if (report->maxfield < 1 || report->field[0]->report_count != DJREPORT_SHORT_LENGTH - 1) {
>
> This is all static information. So this should be checked in the
> .probe(), once the device has been parsed, not for every single call of
> logi_dj_recv_send_report().
Doesn't report_count come from the device?
I can manipulate it with my user app.
--
Lee Jones [李琼斯]
^ permalink raw reply
* Re: [PATCH 1/1] HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write
From: Jiri Kosina @ 2026-03-17 17:24 UTC (permalink / raw)
To: Lee Jones
Cc: Benjamin Tissoires, Filipe Laíns, linux-input, linux-kernel
In-Reply-To: <20260317172052.GF554736@google.com>
On Tue, 17 Mar 2026, Lee Jones wrote:
> > > diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
> > > index 44b716697510..885b986c7a12 100644
> > > --- a/drivers/hid/hid-logitech-dj.c
> > > +++ b/drivers/hid/hid-logitech-dj.c
> > > @@ -1282,6 +1282,12 @@ static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
> > > return -ENODEV;
> > > }
> > >
> > > + if (report->maxfield < 1 || report->field[0]->report_count != DJREPORT_SHORT_LENGTH - 1) {
> >
> > This is all static information. So this should be checked in the
> > .probe(), once the device has been parsed, not for every single call of
> > logi_dj_recv_send_report().
>
> Doesn't report_count come from the device?
The point is -- maxfield and report_count can't change once parsed unless
the report descriptor would be re-read and re-parsed (which doesn't happen
in runtime, only during probe).
So checking during probe/parse time just once should be sufficient,
instead of checking it upon every received report.
Thanks,
--
Jiri Kosina
SUSE Labs
^ permalink raw reply
* [PATCH v3 0/9] Add support for mt6392 PMIC
From: Luca Leonardo Scorcia @ 2026-03-17 18:43 UTC (permalink / raw)
To: linux-mediatek
Cc: Luca Leonardo Scorcia, Dmitry Torokhov, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sen Chu, Sean Wang,
Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Julien Massot, Val Packett, Louis-Alexis Eyraud,
Gary Bisson, Fabien Parent, Chen Zhong, linux-input, devicetree,
linux-kernel, linux-pm, linux-arm-kernel, linux-gpio
The MediaTek mt6392 PMIC is usually found on devices powered by
the mt8516/mt8167 SoC, and is yet another mt6323/mt6397 variant.
This series is mostly based around patches submitted a couple
years ago by Fabien Parent and not merged and from Val Packett's
submission from Jan 2025 that included extra cleanups, fixes, and a
new dtsi file similar to ones that exist for other PMICs. Some
comments weren't addressed and the series was ultimately not merged.
This series only enables four functions: regulators, keys, pinctrl
and RTC.
I added a handful of device tree improvements to fix some dtbs_check
errors and addressed the comments from last year's reviews.
The series has been tested on Xiaomi Mi Smart Clock x04g. In order for
pinctrl to probe successfully patch [1] has to be merged too, but
each patch code has no dependency on the other.
[1] https://lists.infradead.org/pipermail/linux-mediatek/2026-March/105005.html
v3: Added pinctrl device, changed mt6397-rtc fallback to mt6323-rtc,
added schema for regulators and fixed checkpatch issues.
v2: Review feedback - replaced explicit compatibles with fallbacks
Fabien Parent (4):
dt-bindings: mfd: mt6397: Add bindings for MT6392 PMIC
dt-bindings: input: mtk-pmic-keys: add MT6392 binding definition
mfd: mt6397: Add support for MT6392 pmic
regulator: mt6392: Add support for MT6392 regulator
Luca Leonardo Scorcia (3):
dt-bindings: regulator: Document MediaTek MT6392 PMIC Regulators
dt-bindings: pinctrl: mt65xx: Document MT6392 pinctrl
pinctrl: mediatek: mt6397: Add support for MT6392 variant
Val Packett (2):
input: keyboard: mtk-pmic-keys: add MT6392 support
arm64: dts: mt6392: add mt6392 PMIC dtsi
.../bindings/input/mediatek,pmic-keys.yaml | 1 +
.../bindings/mfd/mediatek,mt6397.yaml | 9 +
.../pinctrl/mediatek,mt65xx-pinctrl.yaml | 1 +
.../regulator/mediatek,mt6392-regulator.yaml | 318 ++++++++++++
arch/arm64/boot/dts/mediatek/mt6392.dtsi | 141 +++++
drivers/input/keyboard/mtk-pmic-keys.c | 17 +
drivers/mfd/mt6397-core.c | 46 ++
drivers/mfd/mt6397-irq.c | 8 +
drivers/pinctrl/mediatek/pinctrl-mt6397.c | 37 +-
drivers/pinctrl/mediatek/pinctrl-mtk-mt6392.h | 64 +++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6392-regulator.c | 487 ++++++++++++++++++
include/dt-bindings/pinctrl/mt6392-pinfunc.h | 39 ++
.../regulator/mediatek,mt6392-regulator.h | 24 +
include/linux/mfd/mt6392/core.h | 42 ++
include/linux/mfd/mt6392/registers.h | 487 ++++++++++++++++++
include/linux/mfd/mt6397/core.h | 1 +
include/linux/regulator/mt6392-regulator.h | 40 ++
19 files changed, 1770 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
create mode 100644 arch/arm64/boot/dts/mediatek/mt6392.dtsi
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt6392.h
create mode 100644 drivers/regulator/mt6392-regulator.c
create mode 100644 include/dt-bindings/pinctrl/mt6392-pinfunc.h
create mode 100644 include/dt-bindings/regulator/mediatek,mt6392-regulator.h
create mode 100644 include/linux/mfd/mt6392/core.h
create mode 100644 include/linux/mfd/mt6392/registers.h
create mode 100644 include/linux/regulator/mt6392-regulator.h
--
2.43.0
^ permalink raw reply
* [PATCH v3 1/9] dt-bindings: mfd: mt6397: Add bindings for MT6392 PMIC
From: Luca Leonardo Scorcia @ 2026-03-17 18:43 UTC (permalink / raw)
To: linux-mediatek
Cc: Fabien Parent, Val Packett, Luca Leonardo Scorcia,
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Sen Chu, Sean Wang, Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Gary Bisson, Louis-Alexis Eyraud, Julien Massot,
Chen Zhong, linux-input, devicetree, linux-kernel, linux-pm,
linux-arm-kernel, linux-gpio
In-Reply-To: <20260317184507.523060-1-l.scorcia@gmail.com>
From: Fabien Parent <parent.f@gmail.com>
Add the currently supported bindings for the MT6392 PMIC.
Signed-off-by: Fabien Parent <parent.f@gmail.com>
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
.../devicetree/bindings/mfd/mediatek,mt6397.yaml | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml
index 6a89b479d10f..22b09e148d7c 100644
--- a/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml
@@ -40,6 +40,10 @@ properties:
- mediatek,mt6358
- mediatek,mt6359
- mediatek,mt6397
+ - items:
+ - enum:
+ - mediatek,mt6392
+ - const: mediatek,mt6323
- items:
- enum:
- mediatek,mt6366
@@ -68,6 +72,10 @@ properties:
- mediatek,mt6331-rtc
- mediatek,mt6358-rtc
- mediatek,mt6397-rtc
+ - items:
+ - enum:
+ - mediatek,mt6392-rtc
+ - const: mediatek,mt6323-rtc
- items:
- enum:
- mediatek,mt6366-rtc
@@ -92,6 +100,7 @@ properties:
- mediatek,mt6328-regulator
- mediatek,mt6358-regulator
- mediatek,mt6359-regulator
+ - mediatek,mt6392-regulator
- mediatek,mt6397-regulator
- items:
- enum:
--
2.43.0
^ permalink raw reply related
* [PATCH v3 2/9] dt-bindings: input: mtk-pmic-keys: add MT6392 binding definition
From: Luca Leonardo Scorcia @ 2026-03-17 18:43 UTC (permalink / raw)
To: linux-mediatek
Cc: Fabien Parent, Val Packett, Luca Leonardo Scorcia,
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Sen Chu, Sean Wang, Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Louis-Alexis Eyraud, Gary Bisson, Julien Massot,
Chen Zhong, linux-input, devicetree, linux-kernel, linux-pm,
linux-arm-kernel, linux-gpio
In-Reply-To: <20260317184507.523060-1-l.scorcia@gmail.com>
From: Fabien Parent <parent.f@gmail.com>
Add the binding documentation of the mtk-pmic-keys for the MT6392 PMICs.
Signed-off-by: Fabien Parent <parent.f@gmail.com>
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
---
Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
index b95435bd6a9b..2d3c4161a7f8 100644
--- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -30,6 +30,7 @@ properties:
- mediatek,mt6357-keys
- mediatek,mt6358-keys
- mediatek,mt6359-keys
+ - mediatek,mt6392-keys
- mediatek,mt6397-keys
power-off-time-sec: true
--
2.43.0
^ permalink raw reply related
* [PATCH v3 3/9] dt-bindings: regulator: Document MediaTek MT6392 PMIC Regulators
From: Luca Leonardo Scorcia @ 2026-03-17 18:43 UTC (permalink / raw)
To: linux-mediatek
Cc: Luca Leonardo Scorcia, Dmitry Torokhov, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sen Chu, Sean Wang,
Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Julien Massot, Gary Bisson, Louis-Alexis Eyraud,
Val Packett, Fabien Parent, Chen Zhong, linux-input, devicetree,
linux-kernel, linux-pm, linux-arm-kernel, linux-gpio
In-Reply-To: <20260317184507.523060-1-l.scorcia@gmail.com>
Add bindings for the regulators found in the MediaTek MT6392 PMIC,
usually found in board designs using the MediaTek MT8516/MT8167 SoCs.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
.../regulator/mediatek,mt6392-regulator.yaml | 318 ++++++++++++++++++
.../regulator/mediatek,mt6392-regulator.h | 24 ++
2 files changed, 342 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
create mode 100644 include/dt-bindings/regulator/mediatek,mt6392-regulator.h
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
new file mode 100644
index 000000000000..fa4aad2dcbe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
@@ -0,0 +1,318 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6392-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6392 Regulator
+
+description:
+ Regulator node of the PMIC. This node should under the PMIC's device node.
+ All voltage regulators provided by the PMIC are described as sub-nodes of
+ this node.
+
+properties:
+ compatible:
+ items:
+ - const: mediatek,mt6392-regulator
+
+patternProperties:
+ "^(buck_)?v(core|proc|sys)$":
+ description: Buck regulators
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(adc18|camio|cn18|io18)$":
+ description: LDOs with fixed 1.8V output
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(xo22)$":
+ description: LDOs with fixed 2.2V output
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(m25)$":
+ description: LDOs with fixed 2.5V output
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(aud28|io28)$":
+ description: LDOs with fixed 2.8V output w/ mode
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(cama)$":
+ description: LDOs with fixed 2.8V output w/o mode
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+
+ "^(ldo_)?vusb$":
+ description: LDOs with fixed 3.3V output
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes:
+ description: |
+ LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
+ values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
+ items:
+ enum: [0, 1]
+ unevaluatedProperties: false
+
+ "^(ldo_)?v(aud22|camaf|camd|cn35|efuse|emc3v3|gp1|gp2|m|mc|mch)$":
+ description: LDOs with variable output
+ type: object
+ $ref: regulator.yaml#
+ properties:
+ regulator-allowed-modes: false
+ unevaluatedProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mt6392_regulators: regulators {
+ compatible = "mediatek,mt6392-regulator";
+
+ mt6392_vproc_reg: buck_vproc {
+ regulator-name = "vproc";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vsys_reg: buck_vsys {
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vcore_reg: buck_vcore {
+ regulator-name = "vcore";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vxo22_reg: ldo_vxo22 {
+ regulator-name = "vxo22";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <110>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vaud22_reg: ldo_vaud22 {
+ regulator-name = "vaud22";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vcama_reg: ldo_vcama {
+ regulator-name = "vcama";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vaud28_reg: ldo_vaud28 {
+ regulator-name = "vaud28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vadc18_reg: ldo_vadc18 {
+ regulator-name = "vadc18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vcn35_reg: ldo_vcn35 {
+ regulator-name = "vcn35";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vio28_reg: ldo_vio28 {
+ regulator-name = "vio28";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vusb_reg: ldo_vusb {
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vmc_reg: ldo_vmc {
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-boot-on;
+ };
+
+ mt6392_vmch_reg: ldo_vmch {
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-boot-on;
+ };
+
+ mt6392_vemc3v3_reg: ldo_vemc3v3 {
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-boot-on;
+ };
+
+ mt6392_vgp1_reg: ldo_vgp1 {
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vgp2_reg: ldo_vgp2 {
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vcn18_reg: ldo_vcn18 {
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vcamaf_reg: ldo_vcamaf {
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vm_reg: ldo_vm {
+ regulator-name = "vm";
+ regulator-min-microvolt = <1240000>;
+ regulator-max-microvolt = <1390000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vio18_reg: ldo_vio18 {
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <264>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6392_vcamd_reg: ldo_vcamd {
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vcamio_reg: ldo_vcamio {
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vm25_reg: ldo_vm25 {
+ regulator-name = "vm25";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+
+ mt6392_vefuse_reg: ldo_vefuse {
+ regulator-name = "vefuse";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+ };
diff --git a/include/dt-bindings/regulator/mediatek,mt6392-regulator.h b/include/dt-bindings/regulator/mediatek,mt6392-regulator.h
new file mode 100644
index 000000000000..8bd1a13faad8
--- /dev/null
+++ b/include/dt-bindings/regulator/mediatek,mt6392-regulator.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_REGULATOR_MEDIATEK_MT6392_H_
+#define _DT_BINDINGS_REGULATOR_MEDIATEK_MT6392_H_
+
+/*
+ * Buck mode constants which may be used in devicetree properties (eg.
+ * regulator-initial-mode, regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define MT6392_BUCK_MODE_AUTO 0
+#define MT6392_BUCK_MODE_FORCE_PWM 1
+
+/*
+ * LDO mode constants which may be used in devicetree properties (eg.
+ * regulator-initial-mode, regulator-allowed-modes).
+ * See the manufacturer's datasheet for more information on these modes.
+ */
+
+#define MT6392_LDO_MODE_NORMAL 0
+#define MT6392_LDO_MODE_LP 1
+
+#endif
--
2.43.0
^ permalink raw reply related
* [PATCH v3 4/9] dt-bindings: pinctrl: mt65xx: Document MT6392 pinctrl
From: Luca Leonardo Scorcia @ 2026-03-17 18:43 UTC (permalink / raw)
To: linux-mediatek
Cc: Luca Leonardo Scorcia, Dmitry Torokhov, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sen Chu, Sean Wang,
Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Julien Massot, Val Packett, Gary Bisson,
Louis-Alexis Eyraud, Fabien Parent, Chen Zhong, linux-input,
devicetree, linux-kernel, linux-pm, linux-arm-kernel, linux-gpio
In-Reply-To: <20260317184507.523060-1-l.scorcia@gmail.com>
Add a compatible for the pinctrl device of the MT6392 PMIC, a variant
of the already supported MT6397.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
.../pinctrl/mediatek,mt65xx-pinctrl.yaml | 1 +
include/dt-bindings/pinctrl/mt6392-pinfunc.h | 39 +++++++++++++++++++
2 files changed, 40 insertions(+)
create mode 100644 include/dt-bindings/pinctrl/mt6392-pinfunc.h
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
index aa71398cf522..1468c6f87cfa 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -17,6 +17,7 @@ properties:
enum:
- mediatek,mt2701-pinctrl
- mediatek,mt2712-pinctrl
+ - mediatek,mt6392-pinctrl
- mediatek,mt6397-pinctrl
- mediatek,mt7623-pinctrl
- mediatek,mt8127-pinctrl
diff --git a/include/dt-bindings/pinctrl/mt6392-pinfunc.h b/include/dt-bindings/pinctrl/mt6392-pinfunc.h
new file mode 100644
index 000000000000..c65278c8103d
--- /dev/null
+++ b/include/dt-bindings/pinctrl/mt6392-pinfunc.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+#ifndef __DTS_MT6392_PINFUNC_H
+#define __DTS_MT6392_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT6392_PIN_0_INT__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT6392_PIN_0_INT__FUNC_INT (MTK_PIN_NO(0) | 1)
+#define MT6392_PIN_0_INT__FUNC_TEST_CK2 (MTK_PIN_NO(0) | 5)
+#define MT6392_PIN_0_INT__FUNC_TEST_IN1 (MTK_PIN_NO(0) | 6)
+#define MT6392_PIN_0_INT__FUNC_TEST_OUT1 (MTK_PIN_NO(0) | 7)
+
+#define MT6392_PIN_1_SRCLKEN__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT6392_PIN_1_SRCLKEN__FUNC_SRCLKEN (MTK_PIN_NO(1) | 1)
+#define MT6392_PIN_1_SRCLKEN__FUNC_TEST_CK0 (MTK_PIN_NO(1) | 5)
+#define MT6392_PIN_1_SRCLKEN__FUNC_TEST_IN2 (MTK_PIN_NO(1) | 6)
+#define MT6392_PIN_1_SRCLKEN__FUNC_TEST_OUT2 (MTK_PIN_NO(1) | 7)
+
+#define MT6392_PIN_2_RTC_32K1V8__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT6392_PIN_2_RTC_32K1V8__FUNC_RTC_32K1V8 (MTK_PIN_NO(2) | 1)
+#define MT6392_PIN_2_RTC_32K1V8__FUNC_TEST_CK1 (MTK_PIN_NO(2) | 5)
+#define MT6392_PIN_2_RTC_32K1V8__FUNC_TEST_IN3 (MTK_PIN_NO(2) | 6)
+#define MT6392_PIN_2_RTC_32K1V8__FUNC_TEST_OUT3 (MTK_PIN_NO(2) | 7)
+
+#define MT6392_PIN_3_SPI_CLK__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT6392_PIN_3_SPI_CLK__FUNC_SPI_CLK (MTK_PIN_NO(3) | 1)
+
+#define MT6392_PIN_4_SPI_CSN__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT6392_PIN_4_SPI_CSN__FUNC_SPI_CSN (MTK_PIN_NO(4) | 1)
+
+#define MT6392_PIN_5_SPI_MOSI__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT6392_PIN_5_SPI_MOSI__FUNC_SPI_MOSI (MTK_PIN_NO(5) | 1)
+
+#define MT6392_PIN_6_SPI_MISO__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT6392_PIN_6_SPI_MISO__FUNC_SPI_MISO (MTK_PIN_NO(6) | 1)
+#define MT6392_PIN_6_SPI_MISO__FUNC_TEST_IN4 (MTK_PIN_NO(6) | 6)
+#define MT6392_PIN_6_SPI_MISO__FUNC_TEST_OUT4 (MTK_PIN_NO(6) | 7)
+
+#endif /* __DTS_MT6392_PINFUNC_H */
--
2.43.0
^ permalink raw reply related
* [PATCH v3 5/9] mfd: mt6397: Add support for MT6392 pmic
From: Luca Leonardo Scorcia @ 2026-03-17 18:43 UTC (permalink / raw)
To: linux-mediatek
Cc: Fabien Parent, Val Packett, Luca Leonardo Scorcia,
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Sen Chu, Sean Wang, Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Julien Massot, Gary Bisson, Louis-Alexis Eyraud,
Chen Zhong, linux-input, devicetree, linux-kernel, linux-pm,
linux-arm-kernel, linux-gpio
In-Reply-To: <20260317184507.523060-1-l.scorcia@gmail.com>
From: Fabien Parent <parent.f@gmail.com>
Update the MT6397 MFD driver to support the MT6392 PMIC.
Signed-off-by: Fabien Parent <parent.f@gmail.com>
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
drivers/mfd/mt6397-core.c | 46 +++
drivers/mfd/mt6397-irq.c | 8 +
include/linux/mfd/mt6392/core.h | 42 +++
include/linux/mfd/mt6392/registers.h | 487 +++++++++++++++++++++++++++
include/linux/mfd/mt6397/core.h | 1 +
5 files changed, 584 insertions(+)
create mode 100644 include/linux/mfd/mt6392/core.h
create mode 100644 include/linux/mfd/mt6392/registers.h
diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 3e58d0764c7e..c4b86a44c68b 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -18,6 +18,7 @@
#include <linux/mfd/mt6357/core.h>
#include <linux/mfd/mt6358/core.h>
#include <linux/mfd/mt6359/core.h>
+#include <linux/mfd/mt6392/core.h>
#include <linux/mfd/mt6397/core.h>
#include <linux/mfd/mt6323/registers.h>
#include <linux/mfd/mt6328/registers.h>
@@ -25,6 +26,7 @@
#include <linux/mfd/mt6357/registers.h>
#include <linux/mfd/mt6358/registers.h>
#include <linux/mfd/mt6359/registers.h>
+#include <linux/mfd/mt6392/registers.h>
#include <linux/mfd/mt6397/registers.h>
#define MT6323_RTC_BASE 0x8000
@@ -39,6 +41,9 @@
#define MT6358_RTC_BASE 0x0588
#define MT6358_RTC_SIZE 0x3c
+#define MT6392_RTC_BASE 0x8000
+#define MT6392_RTC_SIZE 0x3e
+
#define MT6397_RTC_BASE 0xe000
#define MT6397_RTC_SIZE 0x3e
@@ -65,6 +70,11 @@ static const struct resource mt6358_rtc_resources[] = {
DEFINE_RES_IRQ(MT6358_IRQ_RTC),
};
+static const struct resource mt6392_rtc_resources[] = {
+ DEFINE_RES_MEM(MT6392_RTC_BASE, MT6392_RTC_SIZE),
+ DEFINE_RES_IRQ(MT6392_IRQ_RTC),
+};
+
static const struct resource mt6397_rtc_resources[] = {
DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
DEFINE_RES_IRQ(MT6397_IRQ_RTC),
@@ -114,6 +124,11 @@ static const struct resource mt6331_keys_resources[] = {
DEFINE_RES_IRQ_NAMED(MT6331_IRQ_STATUS_HOMEKEY, "homekey"),
};
+static const struct resource mt6392_keys_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6392_IRQ_PWRKEY, "powerkey"),
+ DEFINE_RES_IRQ_NAMED(MT6392_IRQ_FCHRKEY, "homekey"),
+};
+
static const struct resource mt6397_keys_resources[] = {
DEFINE_RES_IRQ_NAMED(MT6397_IRQ_PWRKEY, "powerkey"),
DEFINE_RES_IRQ_NAMED(MT6397_IRQ_HOMEKEY, "homekey"),
@@ -253,6 +268,26 @@ static const struct mfd_cell mt6359_devs[] = {
},
};
+static const struct mfd_cell mt6392_devs[] = {
+ {
+ .name = "mt6392-rtc",
+ .num_resources = ARRAY_SIZE(mt6392_rtc_resources),
+ .resources = mt6392_rtc_resources,
+ .of_compatible = "mediatek,mt6392-rtc",
+ }, {
+ .name = "mt6392-regulator",
+ .of_compatible = "mediatek,mt6392-regulator",
+ }, {
+ .name = "mt6392-pinctrl",
+ .of_compatible = "mediatek,mt6392-pinctrl",
+ }, {
+ .name = "mt6392-keys",
+ .num_resources = ARRAY_SIZE(mt6392_keys_resources),
+ .resources = mt6392_keys_resources,
+ .of_compatible = "mediatek,mt6392-keys"
+ },
+};
+
static const struct mfd_cell mt6397_devs[] = {
{
.name = "mt6397-rtc",
@@ -335,6 +370,14 @@ static const struct chip_data mt6359_core = {
.irq_init = mt6358_irq_init,
};
+static const struct chip_data mt6392_core = {
+ .cid_addr = MT6392_CID,
+ .cid_shift = 0,
+ .cells = mt6392_devs,
+ .cell_size = ARRAY_SIZE(mt6392_devs),
+ .irq_init = mt6397_irq_init,
+};
+
static const struct chip_data mt6397_core = {
.cid_addr = MT6397_CID,
.cid_shift = 0,
@@ -416,6 +459,9 @@ static const struct of_device_id mt6397_of_match[] = {
}, {
.compatible = "mediatek,mt6359",
.data = &mt6359_core,
+ }, {
+ .compatible = "mediatek,mt6392",
+ .data = &mt6392_core,
}, {
.compatible = "mediatek,mt6397",
.data = &mt6397_core,
diff --git a/drivers/mfd/mt6397-irq.c b/drivers/mfd/mt6397-irq.c
index 5d2e5459f744..80ea5b92d232 100644
--- a/drivers/mfd/mt6397-irq.c
+++ b/drivers/mfd/mt6397-irq.c
@@ -15,6 +15,8 @@
#include <linux/mfd/mt6328/registers.h>
#include <linux/mfd/mt6331/core.h>
#include <linux/mfd/mt6331/registers.h>
+#include <linux/mfd/mt6392/core.h>
+#include <linux/mfd/mt6392/registers.h>
#include <linux/mfd/mt6397/core.h>
#include <linux/mfd/mt6397/registers.h>
@@ -203,6 +205,12 @@ int mt6397_irq_init(struct mt6397_chip *chip)
chip->int_status[0] = MT6397_INT_STATUS0;
chip->int_status[1] = MT6397_INT_STATUS1;
break;
+ case MT6392_CHIP_ID:
+ chip->int_con[0] = MT6392_INT_CON0;
+ chip->int_con[1] = MT6392_INT_CON1;
+ chip->int_status[0] = MT6392_INT_STATUS0;
+ chip->int_status[1] = MT6392_INT_STATUS1;
+ break;
default:
dev_err(chip->dev, "unsupported chip: 0x%x\n", chip->chip_id);
diff --git a/include/linux/mfd/mt6392/core.h b/include/linux/mfd/mt6392/core.h
new file mode 100644
index 000000000000..4780dab4da92
--- /dev/null
+++ b/include/linux/mfd/mt6392/core.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ */
+
+#ifndef __MFD_MT6392_CORE_H__
+#define __MFD_MT6392_CORE_H__
+
+enum mt6392_irq_numbers {
+ MT6392_IRQ_SPKL_AB = 0,
+ MT6392_IRQ_SPKL,
+ MT6392_IRQ_BAT_L,
+ MT6392_IRQ_BAT_H,
+ MT6392_IRQ_WATCHDOG,
+ MT6392_IRQ_PWRKEY,
+ MT6392_IRQ_THR_L,
+ MT6392_IRQ_THR_H,
+ MT6392_IRQ_VBATON_UNDET,
+ MT6392_IRQ_BVALID_DET,
+ MT6392_IRQ_CHRDET,
+ MT6392_IRQ_OV,
+ MT6392_IRQ_LDO = 16,
+ MT6392_IRQ_FCHRKEY,
+ MT6392_IRQ_RELEASE_PWRKEY,
+ MT6392_IRQ_RELEASE_FCHRKEY,
+ MT6392_IRQ_RTC,
+ MT6392_IRQ_VPROC,
+ MT6392_IRQ_VSYS,
+ MT6392_IRQ_VCORE,
+ MT6392_IRQ_TYPE_C_CC,
+ MT6392_IRQ_TYPEC_H_MAX,
+ MT6392_IRQ_TYPEC_H_MIN,
+ MT6392_IRQ_TYPEC_L_MAX,
+ MT6392_IRQ_TYPEC_L_MIN,
+ MT6392_IRQ_THR_MAX,
+ MT6392_IRQ_THR_MIN,
+ MT6392_IRQ_NAG_C_DLTV,
+ MT6392_IRQ_NR,
+};
+
+#endif /* __MFD_MT6392_CORE_H__ */
diff --git a/include/linux/mfd/mt6392/registers.h b/include/linux/mfd/mt6392/registers.h
new file mode 100644
index 000000000000..4f3a6db830d1
--- /dev/null
+++ b/include/linux/mfd/mt6392/registers.h
@@ -0,0 +1,487 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ */
+
+#ifndef __MFD_MT6392_REGISTERS_H__
+#define __MFD_MT6392_REGISTERS_H__
+
+/* PMIC Registers */
+#define MT6392_CHR_CON0 0x0000
+#define MT6392_CHR_CON1 0x0002
+#define MT6392_CHR_CON2 0x0004
+#define MT6392_CHR_CON3 0x0006
+#define MT6392_CHR_CON4 0x0008
+#define MT6392_CHR_CON5 0x000A
+#define MT6392_CHR_CON6 0x000C
+#define MT6392_CHR_CON7 0x000E
+#define MT6392_CHR_CON8 0x0010
+#define MT6392_CHR_CON9 0x0012
+#define MT6392_CHR_CON10 0x0014
+#define MT6392_CHR_CON11 0x0016
+#define MT6392_CHR_CON12 0x0018
+#define MT6392_CHR_CON13 0x001A
+#define MT6392_CHR_CON14 0x001C
+#define MT6392_CHR_CON15 0x001E
+#define MT6392_CHR_CON16 0x0020
+#define MT6392_CHR_CON17 0x0022
+#define MT6392_CHR_CON18 0x0024
+#define MT6392_CHR_CON19 0x0026
+#define MT6392_CHR_CON20 0x0028
+#define MT6392_CHR_CON21 0x002A
+#define MT6392_CHR_CON22 0x002C
+#define MT6392_CHR_CON23 0x002E
+#define MT6392_CHR_CON24 0x0030
+#define MT6392_CHR_CON25 0x0032
+#define MT6392_CHR_CON26 0x0034
+#define MT6392_CHR_CON27 0x0036
+#define MT6392_CHR_CON28 0x0038
+#define MT6392_CHR_CON29 0x003A
+#define MT6392_STRUP_CON0 0x003C
+#define MT6392_STRUP_CON2 0x003E
+#define MT6392_STRUP_CON3 0x0040
+#define MT6392_STRUP_CON4 0x0042
+#define MT6392_STRUP_CON5 0x0044
+#define MT6392_STRUP_CON6 0x0046
+#define MT6392_STRUP_CON7 0x0048
+#define MT6392_STRUP_CON8 0x004A
+#define MT6392_STRUP_CON9 0x004C
+#define MT6392_STRUP_CON10 0x004E
+#define MT6392_STRUP_CON11 0x0050
+#define MT6392_SPK_CON0 0x0052
+#define MT6392_SPK_CON1 0x0054
+#define MT6392_SPK_CON2 0x0056
+#define MT6392_SPK_CON6 0x005E
+#define MT6392_SPK_CON7 0x0060
+#define MT6392_SPK_CON8 0x0062
+#define MT6392_SPK_CON9 0x0064
+#define MT6392_SPK_CON10 0x0066
+#define MT6392_SPK_CON11 0x0068
+#define MT6392_SPK_CON12 0x006A
+#define MT6392_STRUP_CON12 0x006E
+#define MT6392_STRUP_CON13 0x0070
+#define MT6392_STRUP_CON14 0x0072
+#define MT6392_STRUP_CON15 0x0074
+#define MT6392_STRUP_CON16 0x0076
+#define MT6392_STRUP_CON17 0x0078
+#define MT6392_STRUP_CON18 0x007A
+#define MT6392_STRUP_CON19 0x007C
+#define MT6392_STRUP_CON20 0x007E
+#define MT6392_CID 0x0100
+#define MT6392_TOP_CKPDN0 0x0102
+#define MT6392_TOP_CKPDN0_SET 0x0104
+#define MT6392_TOP_CKPDN0_CLR 0x0106
+#define MT6392_TOP_CKPDN1 0x0108
+#define MT6392_TOP_CKPDN1_SET 0x010A
+#define MT6392_TOP_CKPDN1_CLR 0x010C
+#define MT6392_TOP_CKPDN2 0x010E
+#define MT6392_TOP_CKPDN2_SET 0x0110
+#define MT6392_TOP_CKPDN2_CLR 0x0112
+#define MT6392_TOP_RST_CON 0x0114
+#define MT6392_TOP_RST_CON_SET 0x0116
+#define MT6392_TOP_RST_CON_CLR 0x0118
+#define MT6392_TOP_RST_MISC 0x011A
+#define MT6392_TOP_RST_MISC_SET 0x011C
+#define MT6392_TOP_RST_MISC_CLR 0x011E
+#define MT6392_TOP_CKCON0 0x0120
+#define MT6392_TOP_CKCON0_SET 0x0122
+#define MT6392_TOP_CKCON0_CLR 0x0124
+#define MT6392_TOP_CKCON1 0x0126
+#define MT6392_TOP_CKCON1_SET 0x0128
+#define MT6392_TOP_CKCON1_CLR 0x012A
+#define MT6392_TOP_CKTST0 0x012C
+#define MT6392_TOP_CKTST1 0x012E
+#define MT6392_TOP_CKTST2 0x0130
+#define MT6392_TEST_OUT 0x0132
+#define MT6392_TEST_CON0 0x0134
+#define MT6392_TEST_CON1 0x0136
+#define MT6392_EN_STATUS0 0x0138
+#define MT6392_EN_STATUS1 0x013A
+#define MT6392_OCSTATUS0 0x013C
+#define MT6392_OCSTATUS1 0x013E
+#define MT6392_PGSTATUS 0x0140
+#define MT6392_CHRSTATUS 0x0142
+#define MT6392_TDSEL_CON 0x0144
+#define MT6392_RDSEL_CON 0x0146
+#define MT6392_SMT_CON0 0x0148
+#define MT6392_SMT_CON1 0x014A
+#define MT6392_DRV_CON0 0x0152
+#define MT6392_DRV_CON1 0x0154
+#define MT6392_INT_CON0 0x0160
+#define MT6392_INT_CON0_SET 0x0162
+#define MT6392_INT_CON0_CLR 0x0164
+#define MT6392_INT_CON1 0x0166
+#define MT6392_INT_CON1_SET 0x0168
+#define MT6392_INT_CON1_CLR 0x016A
+#define MT6392_INT_MISC_CON 0x016C
+#define MT6392_INT_MISC_CON_SET 0x016E
+#define MT6392_INT_MISC_CON_CLR 0x0170
+#define MT6392_INT_STATUS0 0x0172
+#define MT6392_INT_STATUS1 0x0174
+#define MT6392_OC_GEAR_0 0x0176
+#define MT6392_OC_GEAR_1 0x0178
+#define MT6392_OC_GEAR_2 0x017A
+#define MT6392_OC_CTL_VPROC 0x017C
+#define MT6392_OC_CTL_VSYS 0x017E
+#define MT6392_OC_CTL_VCORE 0x0180
+#define MT6392_FQMTR_CON0 0x0182
+#define MT6392_FQMTR_CON1 0x0184
+#define MT6392_FQMTR_CON2 0x0186
+#define MT6392_RG_SPI_CON 0x0188
+#define MT6392_DEW_DIO_EN 0x018A
+#define MT6392_DEW_READ_TEST 0x018C
+#define MT6392_DEW_WRITE_TEST 0x018E
+#define MT6392_DEW_CRC_SWRST 0x0190
+#define MT6392_DEW_CRC_EN 0x0192
+#define MT6392_DEW_CRC_VAL 0x0194
+#define MT6392_DEW_DBG_MON_SEL 0x0196
+#define MT6392_DEW_CIPHER_KEY_SEL 0x0198
+#define MT6392_DEW_CIPHER_IV_SEL 0x019A
+#define MT6392_DEW_CIPHER_EN 0x019C
+#define MT6392_DEW_CIPHER_RDY 0x019E
+#define MT6392_DEW_CIPHER_MODE 0x01A0
+#define MT6392_DEW_CIPHER_SWRST 0x01A2
+#define MT6392_DEW_RDDMY_NO 0x01A4
+#define MT6392_DEW_RDATA_DLY_SEL 0x01A6
+#define MT6392_CLK_TRIM_CON0 0x01A8
+#define MT6392_BUCK_CON0 0x0200
+#define MT6392_BUCK_CON1 0x0202
+#define MT6392_BUCK_CON2 0x0204
+#define MT6392_BUCK_CON3 0x0206
+#define MT6392_BUCK_CON4 0x0208
+#define MT6392_BUCK_CON5 0x020A
+#define MT6392_VPROC_CON0 0x020C
+#define MT6392_VPROC_CON1 0x020E
+#define MT6392_VPROC_CON2 0x0210
+#define MT6392_VPROC_CON3 0x0212
+#define MT6392_VPROC_CON4 0x0214
+#define MT6392_VPROC_CON5 0x0216
+#define MT6392_VPROC_CON7 0x021A
+#define MT6392_VPROC_CON8 0x021C
+#define MT6392_VPROC_CON9 0x021E
+#define MT6392_VPROC_CON10 0x0220
+#define MT6392_VPROC_CON11 0x0222
+#define MT6392_VPROC_CON12 0x0224
+#define MT6392_VPROC_CON13 0x0226
+#define MT6392_VPROC_CON14 0x0228
+#define MT6392_VPROC_CON15 0x022A
+#define MT6392_VPROC_CON18 0x0230
+#define MT6392_VSYS_CON0 0x0232
+#define MT6392_VSYS_CON1 0x0234
+#define MT6392_VSYS_CON2 0x0236
+#define MT6392_VSYS_CON3 0x0238
+#define MT6392_VSYS_CON4 0x023A
+#define MT6392_VSYS_CON5 0x023C
+#define MT6392_VSYS_CON7 0x0240
+#define MT6392_VSYS_CON8 0x0242
+#define MT6392_VSYS_CON9 0x0244
+#define MT6392_VSYS_CON10 0x0246
+#define MT6392_VSYS_CON11 0x0248
+#define MT6392_VSYS_CON12 0x024A
+#define MT6392_VSYS_CON13 0x024C
+#define MT6392_VSYS_CON14 0x024E
+#define MT6392_VSYS_CON15 0x0250
+#define MT6392_VSYS_CON18 0x0256
+#define MT6392_BUCK_OC_CON0 0x0258
+#define MT6392_BUCK_OC_CON1 0x025A
+#define MT6392_BUCK_OC_CON2 0x025C
+#define MT6392_BUCK_OC_CON3 0x025E
+#define MT6392_BUCK_OC_CON4 0x0260
+#define MT6392_BUCK_OC_VPROC_CON0 0x0262
+#define MT6392_BUCK_OC_VCORE_CON0 0x0264
+#define MT6392_BUCK_OC_VSYS_CON0 0x0266
+#define MT6392_BUCK_ANA_MON_CON0 0x0268
+#define MT6392_BUCK_EFUSE_OC_CON0 0x026A
+#define MT6392_VCORE_CON0 0x0300
+#define MT6392_VCORE_CON1 0x0302
+#define MT6392_VCORE_CON2 0x0304
+#define MT6392_VCORE_CON3 0x0306
+#define MT6392_VCORE_CON4 0x0308
+#define MT6392_VCORE_CON5 0x030A
+#define MT6392_VCORE_CON7 0x030E
+#define MT6392_VCORE_CON8 0x0310
+#define MT6392_VCORE_CON9 0x0312
+#define MT6392_VCORE_CON10 0x0314
+#define MT6392_VCORE_CON11 0x0316
+#define MT6392_VCORE_CON12 0x0318
+#define MT6392_VCORE_CON13 0x031A
+#define MT6392_VCORE_CON14 0x031C
+#define MT6392_VCORE_CON15 0x031E
+#define MT6392_VCORE_CON18 0x0324
+#define MT6392_BUCK_K_CON0 0x032A
+#define MT6392_BUCK_K_CON1 0x032C
+#define MT6392_BUCK_K_CON2 0x032E
+#define MT6392_ANALDO_CON0 0x0400
+#define MT6392_ANALDO_CON1 0x0402
+#define MT6392_ANALDO_CON2 0x0404
+#define MT6392_ANALDO_CON3 0x0406
+#define MT6392_ANALDO_CON4 0x0408
+#define MT6392_ANALDO_CON6 0x040C
+#define MT6392_ANALDO_CON7 0x040E
+#define MT6392_ANALDO_CON8 0x0410
+#define MT6392_ANALDO_CON10 0x0412
+#define MT6392_ANALDO_CON15 0x0414
+#define MT6392_ANALDO_CON16 0x0416
+#define MT6392_ANALDO_CON17 0x0418
+#define MT6392_ANALDO_CON21 0x0420
+#define MT6392_ANALDO_CON22 0x0422
+#define MT6392_ANALDO_CON23 0x0424
+#define MT6392_ANALDO_CON24 0x0426
+#define MT6392_ANALDO_CON25 0x0428
+#define MT6392_ANALDO_CON26 0x042A
+#define MT6392_ANALDO_CON27 0x042C
+#define MT6392_ANALDO_CON28 0x042E
+#define MT6392_ANALDO_CON29 0x0430
+#define MT6392_DIGLDO_CON0 0x0500
+#define MT6392_DIGLDO_CON2 0x0502
+#define MT6392_DIGLDO_CON3 0x0504
+#define MT6392_DIGLDO_CON5 0x0506
+#define MT6392_DIGLDO_CON6 0x0508
+#define MT6392_DIGLDO_CON7 0x050A
+#define MT6392_DIGLDO_CON8 0x050C
+#define MT6392_DIGLDO_CON10 0x0510
+#define MT6392_DIGLDO_CON11 0x0512
+#define MT6392_DIGLDO_CON12 0x0514
+#define MT6392_DIGLDO_CON15 0x051A
+#define MT6392_DIGLDO_CON20 0x0524
+#define MT6392_DIGLDO_CON21 0x0526
+#define MT6392_DIGLDO_CON23 0x0528
+#define MT6392_DIGLDO_CON24 0x052A
+#define MT6392_DIGLDO_CON26 0x052C
+#define MT6392_DIGLDO_CON27 0x052E
+#define MT6392_DIGLDO_CON28 0x0530
+#define MT6392_DIGLDO_CON29 0x0532
+#define MT6392_DIGLDO_CON30 0x0534
+#define MT6392_DIGLDO_CON31 0x0536
+#define MT6392_DIGLDO_CON32 0x0538
+#define MT6392_DIGLDO_CON33 0x053A
+#define MT6392_DIGLDO_CON36 0x0540
+#define MT6392_DIGLDO_CON41 0x0546
+#define MT6392_DIGLDO_CON44 0x054C
+#define MT6392_DIGLDO_CON47 0x0552
+#define MT6392_DIGLDO_CON48 0x0554
+#define MT6392_DIGLDO_CON49 0x0556
+#define MT6392_DIGLDO_CON50 0x0558
+#define MT6392_DIGLDO_CON51 0x055A
+#define MT6392_DIGLDO_CON52 0x055C
+#define MT6392_DIGLDO_CON53 0x055E
+#define MT6392_DIGLDO_CON54 0x0560
+#define MT6392_DIGLDO_CON55 0x0562
+#define MT6392_DIGLDO_CON56 0x0564
+#define MT6392_DIGLDO_CON57 0x0566
+#define MT6392_DIGLDO_CON58 0x0568
+#define MT6392_DIGLDO_CON59 0x056A
+#define MT6392_DIGLDO_CON60 0x056C
+#define MT6392_DIGLDO_CON61 0x056E
+#define MT6392_DIGLDO_CON62 0x0570
+#define MT6392_DIGLDO_CON63 0x0572
+#define MT6392_EFUSE_CON0 0x0600
+#define MT6392_EFUSE_CON1 0x0602
+#define MT6392_EFUSE_CON2 0x0604
+#define MT6392_EFUSE_CON3 0x0606
+#define MT6392_EFUSE_CON4 0x0608
+#define MT6392_EFUSE_CON5 0x060A
+#define MT6392_EFUSE_CON6 0x060C
+#define MT6392_EFUSE_VAL_0_15 0x060E
+#define MT6392_EFUSE_VAL_16_31 0x0610
+#define MT6392_EFUSE_VAL_32_47 0x0612
+#define MT6392_EFUSE_VAL_48_63 0x0614
+#define MT6392_EFUSE_VAL_64_79 0x0616
+#define MT6392_EFUSE_VAL_80_95 0x0618
+#define MT6392_EFUSE_VAL_96_111 0x061A
+#define MT6392_EFUSE_VAL_112_127 0x061C
+#define MT6392_EFUSE_VAL_128_143 0x061E
+#define MT6392_EFUSE_VAL_144_159 0x0620
+#define MT6392_EFUSE_VAL_160_175 0x0622
+#define MT6392_EFUSE_VAL_176_191 0x0624
+#define MT6392_EFUSE_VAL_192_207 0x0626
+#define MT6392_EFUSE_VAL_208_223 0x0628
+#define MT6392_EFUSE_VAL_224_239 0x062A
+#define MT6392_EFUSE_VAL_240_255 0x062C
+#define MT6392_EFUSE_VAL_256_271 0x062E
+#define MT6392_EFUSE_VAL_272_287 0x0630
+#define MT6392_EFUSE_VAL_288_303 0x0632
+#define MT6392_EFUSE_VAL_304_319 0x0634
+#define MT6392_EFUSE_VAL_320_335 0x0636
+#define MT6392_EFUSE_VAL_336_351 0x0638
+#define MT6392_EFUSE_VAL_352_367 0x063A
+#define MT6392_EFUSE_VAL_368_383 0x063C
+#define MT6392_EFUSE_VAL_384_399 0x063E
+#define MT6392_EFUSE_VAL_400_415 0x0640
+#define MT6392_EFUSE_VAL_416_431 0x0642
+#define MT6392_RTC_MIX_CON0 0x0644
+#define MT6392_RTC_MIX_CON1 0x0646
+#define MT6392_EFUSE_VAL_432_447 0x0648
+#define MT6392_EFUSE_VAL_448_463 0x064A
+#define MT6392_EFUSE_VAL_464_479 0x064C
+#define MT6392_EFUSE_VAL_480_495 0x064E
+#define MT6392_EFUSE_VAL_496_511 0x0650
+#define MT6392_EFUSE_DOUT_0_15 0x0652
+#define MT6392_EFUSE_DOUT_16_31 0x0654
+#define MT6392_EFUSE_DOUT_32_47 0x0656
+#define MT6392_EFUSE_DOUT_48_63 0x0658
+#define MT6392_EFUSE_DOUT_64_79 0x065A
+#define MT6392_EFUSE_DOUT_80_95 0x065C
+#define MT6392_EFUSE_DOUT_96_111 0x065E
+#define MT6392_EFUSE_DOUT_112_127 0x0660
+#define MT6392_EFUSE_DOUT_128_143 0x0662
+#define MT6392_EFUSE_DOUT_144_159 0x0664
+#define MT6392_EFUSE_DOUT_160_175 0x0666
+#define MT6392_EFUSE_DOUT_176_191 0x0668
+#define MT6392_EFUSE_DOUT_192_207 0x066A
+#define MT6392_EFUSE_DOUT_208_223 0x066C
+#define MT6392_EFUSE_DOUT_224_239 0x066E
+#define MT6392_EFUSE_DOUT_240_255 0x0670
+#define MT6392_EFUSE_DOUT_256_271 0x0672
+#define MT6392_EFUSE_DOUT_272_287 0x0674
+#define MT6392_EFUSE_DOUT_288_303 0x0676
+#define MT6392_EFUSE_DOUT_304_319 0x0678
+#define MT6392_EFUSE_DOUT_320_335 0x067A
+#define MT6392_EFUSE_DOUT_336_351 0x067C
+#define MT6392_EFUSE_DOUT_352_367 0x067E
+#define MT6392_EFUSE_DOUT_368_383 0x0680
+#define MT6392_EFUSE_DOUT_384_399 0x0682
+#define MT6392_EFUSE_DOUT_400_415 0x0684
+#define MT6392_EFUSE_DOUT_416_431 0x0686
+#define MT6392_EFUSE_DOUT_432_447 0x0688
+#define MT6392_EFUSE_DOUT_448_463 0x068A
+#define MT6392_EFUSE_DOUT_464_479 0x068C
+#define MT6392_EFUSE_DOUT_480_495 0x068E
+#define MT6392_EFUSE_DOUT_496_511 0x0690
+#define MT6392_EFUSE_CON7 0x0692
+#define MT6392_EFUSE_CON8 0x0694
+#define MT6392_EFUSE_CON9 0x0696
+#define MT6392_AUXADC_ADC0 0x0700
+#define MT6392_AUXADC_ADC1 0x0702
+#define MT6392_AUXADC_ADC2 0x0704
+#define MT6392_AUXADC_ADC3 0x0706
+#define MT6392_AUXADC_ADC4 0x0708
+#define MT6392_AUXADC_ADC5 0x070A
+#define MT6392_AUXADC_ADC6 0x070C
+#define MT6392_AUXADC_ADC7 0x070E
+#define MT6392_AUXADC_ADC8 0x0710
+#define MT6392_AUXADC_ADC9 0x0712
+#define MT6392_AUXADC_ADC10 0x0714
+#define MT6392_AUXADC_ADC11 0x0716
+#define MT6392_AUXADC_ADC12 0x0718
+#define MT6392_AUXADC_ADC13 0x071A
+#define MT6392_AUXADC_ADC14 0x071C
+#define MT6392_AUXADC_ADC15 0x071E
+#define MT6392_AUXADC_ADC16 0x0720
+#define MT6392_AUXADC_ADC17 0x0722
+#define MT6392_AUXADC_ADC18 0x0724
+#define MT6392_AUXADC_ADC19 0x0726
+#define MT6392_AUXADC_ADC20 0x0728
+#define MT6392_AUXADC_ADC21 0x072A
+#define MT6392_AUXADC_ADC22 0x072C
+#define MT6392_AUXADC_STA0 0x072E
+#define MT6392_AUXADC_STA1 0x0730
+#define MT6392_AUXADC_RQST0 0x0732
+#define MT6392_AUXADC_RQST0_SET 0x0734
+#define MT6392_AUXADC_RQST0_CLR 0x0736
+#define MT6392_AUXADC_CON0 0x0738
+#define MT6392_AUXADC_CON0_SET 0x073A
+#define MT6392_AUXADC_CON0_CLR 0x073C
+#define MT6392_AUXADC_CON1 0x073E
+#define MT6392_AUXADC_CON2 0x0740
+#define MT6392_AUXADC_CON3 0x0742
+#define MT6392_AUXADC_CON4 0x0744
+#define MT6392_AUXADC_CON5 0x0746
+#define MT6392_AUXADC_CON6 0x0748
+#define MT6392_AUXADC_CON7 0x074A
+#define MT6392_AUXADC_CON8 0x074C
+#define MT6392_AUXADC_CON9 0x074E
+#define MT6392_AUXADC_CON10 0x0750
+#define MT6392_AUXADC_CON11 0x0752
+#define MT6392_AUXADC_CON12 0x0754
+#define MT6392_AUXADC_CON13 0x0756
+#define MT6392_AUXADC_CON14 0x0758
+#define MT6392_AUXADC_CON15 0x075A
+#define MT6392_AUXADC_CON16 0x075C
+#define MT6392_AUXADC_AUTORPT0 0x075E
+#define MT6392_AUXADC_LBAT0 0x0760
+#define MT6392_AUXADC_LBAT1 0x0762
+#define MT6392_AUXADC_LBAT2 0x0764
+#define MT6392_AUXADC_LBAT3 0x0766
+#define MT6392_AUXADC_LBAT4 0x0768
+#define MT6392_AUXADC_LBAT5 0x076A
+#define MT6392_AUXADC_LBAT6 0x076C
+#define MT6392_AUXADC_THR0 0x076E
+#define MT6392_AUXADC_THR1 0x0770
+#define MT6392_AUXADC_THR2 0x0772
+#define MT6392_AUXADC_THR3 0x0774
+#define MT6392_AUXADC_THR4 0x0776
+#define MT6392_AUXADC_THR5 0x0778
+#define MT6392_AUXADC_THR6 0x077A
+#define MT6392_AUXADC_EFUSE0 0x077C
+#define MT6392_AUXADC_EFUSE1 0x077E
+#define MT6392_AUXADC_EFUSE2 0x0780
+#define MT6392_AUXADC_EFUSE3 0x0782
+#define MT6392_AUXADC_EFUSE4 0x0784
+#define MT6392_AUXADC_EFUSE5 0x0786
+#define MT6392_AUXADC_NAG_0 0x0788
+#define MT6392_AUXADC_NAG_1 0x078A
+#define MT6392_AUXADC_NAG_2 0x078C
+#define MT6392_AUXADC_NAG_3 0x078E
+#define MT6392_AUXADC_NAG_4 0x0790
+#define MT6392_AUXADC_NAG_5 0x0792
+#define MT6392_AUXADC_NAG_6 0x0794
+#define MT6392_AUXADC_NAG_7 0x0796
+#define MT6392_AUXADC_NAG_8 0x0798
+#define MT6392_AUXADC_TYPEC_H_1 0x079A
+#define MT6392_AUXADC_TYPEC_H_2 0x079C
+#define MT6392_AUXADC_TYPEC_H_3 0x079E
+#define MT6392_AUXADC_TYPEC_H_4 0x07A0
+#define MT6392_AUXADC_TYPEC_H_5 0x07A2
+#define MT6392_AUXADC_TYPEC_H_6 0x07A4
+#define MT6392_AUXADC_TYPEC_H_7 0x07A6
+#define MT6392_AUXADC_TYPEC_L_1 0x07A8
+#define MT6392_AUXADC_TYPEC_L_2 0x07AA
+#define MT6392_AUXADC_TYPEC_L_3 0x07AC
+#define MT6392_AUXADC_TYPEC_L_4 0x07AE
+#define MT6392_AUXADC_TYPEC_L_5 0x07B0
+#define MT6392_AUXADC_TYPEC_L_6 0x07B2
+#define MT6392_AUXADC_TYPEC_L_7 0x07B4
+#define MT6392_AUXADC_NAG_9 0x07B6
+#define MT6392_TYPE_C_PHY_RG_0 0x0800
+#define MT6392_TYPE_C_PHY_RG_CC_RESERVE_CSR 0x0802
+#define MT6392_TYPE_C_VCMP_CTRL 0x0804
+#define MT6392_TYPE_C_CTRL 0x0806
+#define MT6392_TYPE_C_CC_SW_CTRL 0x080a
+#define MT6392_TYPE_C_CC_VOL_PERIODIC_MEAS_VAL 0x080c
+#define MT6392_TYPE_C_CC_VOL_DEBOUNCE_CNT_VAL 0x080e
+#define MT6392_TYPE_C_DRP_SRC_CNT_VAL_0 0x0810
+#define MT6392_TYPE_C_DRP_SNK_CNT_VAL_0 0x0814
+#define MT6392_TYPE_C_DRP_TRY_CNT_VAL_0 0x0818
+#define MT6392_TYPE_C_CC_SRC_DEFAULT_DAC_VAL 0x0820
+#define MT6392_TYPE_C_CC_SRC_15_DAC_VAL 0x0822
+#define MT6392_TYPE_C_CC_SRC_30_DAC_VAL 0x0824
+#define MT6392_TYPE_C_CC_SNK_DAC_VAL_0 0x0828
+#define MT6392_TYPE_C_CC_SNK_DAC_VAL_1 0x082a
+#define MT6392_TYPE_C_INTR_EN_0 0x0830
+#define MT6392_TYPE_C_INTR_EN_2 0x0834
+#define MT6392_TYPE_C_INTR_0 0x0838
+#define MT6392_TYPE_C_INTR_2 0x083C
+#define MT6392_TYPE_C_CC_STATUS 0x0840
+#define MT6392_TYPE_C_PWR_STATUS 0x0842
+#define MT6392_TYPE_C_PHY_RG_CC1_RESISTENCE_0 0x0844
+#define MT6392_TYPE_C_PHY_RG_CC1_RESISTENCE_1 0x0846
+#define MT6392_TYPE_C_PHY_RG_CC2_RESISTENCE_0 0x0848
+#define MT6392_TYPE_C_PHY_RG_CC2_RESISTENCE_1 0x084a
+#define MT6392_TYPE_C_CC_SW_FORCE_MODE_ENABLE_0 0x0860
+#define MT6392_TYPE_C_CC_SW_FORCE_MODE_VAL_0 0x0864
+#define MT6392_TYPE_C_CC_SW_FORCE_MODE_VAL_1 0x0866
+#define MT6392_TYPE_C_CC_SW_FORCE_MODE_ENABLE_1 0x0868
+#define MT6392_TYPE_C_CC_SW_FORCE_MODE_VAL_2 0x086c
+#define MT6392_TYPE_C_CC_DAC_CALI_CTRL 0x0870
+#define MT6392_TYPE_C_CC_DAC_CALI_RESULT 0x0872
+#define MT6392_TYPE_C_DEBUG_PORT_SELECT_0 0x0880
+#define MT6392_TYPE_C_DEBUG_PORT_SELECT_1 0x0882
+#define MT6392_TYPE_C_DEBUG_MODE_SELECT 0x0884
+#define MT6392_TYPE_C_DEBUG_OUT_READ_0 0x0888
+#define MT6392_TYPE_C_DEBUG_OUT_READ_1 0x088a
+#define MT6392_TYPE_C_SW_DEBUG_PORT_0 0x088c
+#define MT6392_TYPE_C_SW_DEBUG_PORT_1 0x088e
+
+#endif /* __MFD_MT6392_REGISTERS_H__ */
diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
index b774c3a4bb62..d665d0777065 100644
--- a/include/linux/mfd/mt6397/core.h
+++ b/include/linux/mfd/mt6397/core.h
@@ -20,6 +20,7 @@ enum chip_id {
MT6359_CHIP_ID = 0x59,
MT6366_CHIP_ID = 0x66,
MT6391_CHIP_ID = 0x91,
+ MT6392_CHIP_ID = 0x92,
MT6397_CHIP_ID = 0x97,
};
--
2.43.0
^ permalink raw reply related
* [PATCH v3 6/9] input: keyboard: mtk-pmic-keys: add MT6392 support
From: Luca Leonardo Scorcia @ 2026-03-17 18:43 UTC (permalink / raw)
To: linux-mediatek
Cc: Val Packett, Luca Leonardo Scorcia, Dmitry Torokhov, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sen Chu, Sean Wang,
Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Gary Bisson, Julien Massot, Louis-Alexis Eyraud,
Fabien Parent, Chen Zhong, linux-input, devicetree, linux-kernel,
linux-pm, linux-arm-kernel, linux-gpio
In-Reply-To: <20260317184507.523060-1-l.scorcia@gmail.com>
From: Val Packett <val@packett.cool>
Add support for the MT6392 PMIC to the keys driver.
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/keyboard/mtk-pmic-keys.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c
index c78d9f6d97c4..8b4a89fce4fb 100644
--- a/drivers/input/keyboard/mtk-pmic-keys.c
+++ b/drivers/input/keyboard/mtk-pmic-keys.c
@@ -13,6 +13,7 @@
#include <linux/mfd/mt6357/registers.h>
#include <linux/mfd/mt6358/registers.h>
#include <linux/mfd/mt6359/registers.h>
+#include <linux/mfd/mt6392/registers.h>
#include <linux/mfd/mt6397/core.h>
#include <linux/mfd/mt6397/registers.h>
#include <linux/module.h>
@@ -69,6 +70,19 @@ static const struct mtk_pmic_regs mt6397_regs = {
.rst_lprst_mask = MTK_PMIC_RST_DU_MASK,
};
+static const struct mtk_pmic_regs mt6392_regs = {
+ .keys_regs[MTK_PMIC_PWRKEY_INDEX] =
+ MTK_PMIC_KEYS_REGS(MT6392_CHRSTATUS, 0x2,
+ MT6392_INT_MISC_CON, 0x10,
+ MTK_PMIC_PWRKEY_RST),
+ .keys_regs[MTK_PMIC_HOMEKEY_INDEX] =
+ MTK_PMIC_KEYS_REGS(MT6392_CHRSTATUS, 0x4,
+ MT6392_INT_MISC_CON, 0x8,
+ MTK_PMIC_HOMEKEY_RST),
+ .pmic_rst_reg = MT6392_TOP_RST_MISC,
+ .rst_lprst_mask = MTK_PMIC_RST_DU_MASK,
+};
+
static const struct mtk_pmic_regs mt6323_regs = {
.keys_regs[MTK_PMIC_PWRKEY_INDEX] =
MTK_PMIC_KEYS_REGS(MT6323_CHRSTATUS,
@@ -301,6 +315,9 @@ static const struct of_device_id of_mtk_pmic_keys_match_tbl[] = {
{
.compatible = "mediatek,mt6397-keys",
.data = &mt6397_regs,
+ }, {
+ .compatible = "mediatek,mt6392-keys",
+ .data = &mt6392_regs,
}, {
.compatible = "mediatek,mt6323-keys",
.data = &mt6323_regs,
--
2.43.0
^ permalink raw reply related
* [PATCH v3 7/9] regulator: mt6392: Add support for MT6392 regulator
From: Luca Leonardo Scorcia @ 2026-03-17 18:43 UTC (permalink / raw)
To: linux-mediatek
Cc: Fabien Parent, Val Packett, Luca Leonardo Scorcia,
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Sen Chu, Sean Wang, Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Gary Bisson, Louis-Alexis Eyraud, Julien Massot,
Chen Zhong, linux-input, devicetree, linux-kernel, linux-pm,
linux-arm-kernel, linux-gpio
In-Reply-To: <20260317184507.523060-1-l.scorcia@gmail.com>
From: Fabien Parent <parent.f@gmail.com>
The MT6392 is a regulator found on boards based on the MediaTek
MT8167, MT8516, and probably other SoCs. It is a so called PMIC and
connects as a slave to a SoC using SPI, wrapped inside PWRAP.
Signed-off-by: Fabien Parent <parent.f@gmail.com>
Co-developed-by: Val Packett <val@packett.cool>
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6392-regulator.c | 487 +++++++++++++++++++++
include/linux/regulator/mt6392-regulator.h | 40 ++
4 files changed, 537 insertions(+)
create mode 100644 drivers/regulator/mt6392-regulator.c
create mode 100644 include/linux/regulator/mt6392-regulator.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index d2335276cce5..66876d730807 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -991,6 +991,15 @@ config REGULATOR_MT6380
This driver supports the control of different power rails of device
through regulator interface.
+config REGULATOR_MT6392
+ tristate "MediaTek MT6392 PMIC"
+ depends on MFD_MT6397
+ help
+ Say y here to select this option to enable the power regulator of
+ MediaTek MT6392 PMIC.
+ This driver supports the control of different power rails of device
+ through regulator interface.
+
config REGULATOR_MT6397
tristate "MediaTek MT6397 PMIC"
depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 1beba1493241..db5145cfcf36 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -117,6 +117,7 @@ obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
obj-$(CONFIG_REGULATOR_MT6363) += mt6363-regulator.o
obj-$(CONFIG_REGULATOR_MT6370) += mt6370-regulator.o
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
+obj-$(CONFIG_REGULATOR_MT6392) += mt6392-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
diff --git a/drivers/regulator/mt6392-regulator.c b/drivers/regulator/mt6392-regulator.c
new file mode 100644
index 000000000000..50cc0019f48a
--- /dev/null
+++ b/drivers/regulator/mt6392-regulator.c
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 MediaTek Inc.
+// Copyright (c) 2020 BayLibre, SAS.
+// Author: Chen Zhong <chen.zhong@mediatek.com>
+// Author: Fabien Parent <fparent@baylibre.com>
+//
+// Based on mt6397-regulator.c
+
+#include <linux/module.h>
+#include <linux/linear_range.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6392/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6392-regulator.h>
+#include <linux/regulator/of_regulator.h>
+#include <dt-bindings/regulator/mediatek,mt6392-regulator.h>
+
+/*
+ * MT6392 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ */
+struct mt6392_regulator_info {
+ struct regulator_desc desc;
+ u32 qi;
+ u32 vselon_reg;
+ u32 vselctrl_reg;
+ u32 vselctrl_mask;
+ u32 modeset_reg;
+ u32 modeset_mask;
+};
+
+#define MT6392_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \
+ vosel, vosel_mask, voselon, vosel_ctrl, \
+ _modeset_reg, _modeset_mask, rampdelay) \
+[MT6392_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6392_volt_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6392_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .linear_ranges = volt_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(0), \
+ .ramp_delay = rampdelay, \
+ }, \
+ .qi = BIT(13), \
+ .vselon_reg = voselon, \
+ .vselctrl_reg = vosel_ctrl, \
+ .vselctrl_mask = BIT(1), \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+#define MT6392_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \
+ vosel_mask, _modeset_reg, _modeset_mask, entime) \
+[MT6392_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6392_volt_table_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6392_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(ldo_volt_table), \
+ .volt_table = ldo_volt_table, \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ .enable_time = entime, \
+ }, \
+ .qi = BIT(15), \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+#define MT6392_LDO_LINEAR(match, vreg, min, max, step, volt_ranges, \
+ enreg, enbit, vosel, vosel_mask, _modeset_reg, \
+ _modeset_mask, entime) \
+[MT6392_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6392_volt_ldo_range_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6392_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .linear_ranges = volt_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
+ .vsel_reg = vosel, \
+ .vsel_mask = vosel_mask, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ .enable_time = entime, \
+ }, \
+ .qi = BIT(15), \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+#define MT6392_REG_FIXED(match, vreg, enreg, enbit, volt, \
+ _modeset_reg, _modeset_mask, entime) \
+[MT6392_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6392_volt_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6392_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = 1, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ .enable_time = entime, \
+ .min_uV = volt, \
+ }, \
+ .qi = BIT(15), \
+ .modeset_reg = _modeset_reg, \
+ .modeset_mask = _modeset_mask, \
+}
+
+#define MT6392_REG_FIXED_NO_MODE(match, vreg, enreg, enbit, volt, \
+ entime) \
+[MT6392_ID_##vreg] = { \
+ .desc = { \
+ .name = #vreg, \
+ .of_match = of_match_ptr(match), \
+ .ops = &mt6392_volt_fixed_no_mode_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = MT6392_ID_##vreg, \
+ .owner = THIS_MODULE, \
+ .n_voltages = 1, \
+ .enable_reg = enreg, \
+ .enable_mask = BIT(enbit), \
+ .enable_time = entime, \
+ .min_uV = volt, \
+ }, \
+ .qi = BIT(15), \
+}
+
+static const struct linear_range buck_volt_range1[] = {
+ REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const struct linear_range buck_volt_range2[] = {
+ REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500),
+};
+
+static const u32 ldo_volt_table1[] = {
+ 1800000, 1900000, 2000000, 2200000,
+};
+
+static const struct linear_range ldo_volt_range2[] = {
+ REGULATOR_LINEAR_RANGE(3300000, 0, 3, 100000),
+};
+
+static const u32 ldo_volt_table3[] = {
+ 1800000, 3300000,
+};
+
+static const u32 ldo_volt_table4[] = {
+ 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table5[] = {
+ 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table6[] = {
+ 1240000, 1390000,
+};
+
+static const u32 ldo_volt_table7[] = {
+ 1200000, 1300000, 1500000, 1800000,
+};
+
+static const u32 ldo_volt_table8[] = {
+ 1800000, 2000000,
+};
+
+static int mt6392_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ int ret, val = 0;
+ struct mt6392_regulator_info *info = rdev_get_drvdata(rdev);
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = MT6392_BUCK_MODE_FORCE_PWM;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = MT6392_BUCK_MODE_AUTO;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val <<= ffs(info->modeset_mask) - 1;
+
+ ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+ info->modeset_mask, val);
+
+ return ret;
+}
+
+static unsigned int mt6392_buck_get_mode(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ unsigned int mode;
+ int ret;
+ struct mt6392_regulator_info *info = rdev_get_drvdata(rdev);
+
+ ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= info->modeset_mask;
+ val >>= ffs(info->modeset_mask) - 1;
+
+ if (val & 0x1)
+ mode = REGULATOR_MODE_FAST;
+ else
+ mode = REGULATOR_MODE_NORMAL;
+
+ return mode;
+}
+
+static int mt6392_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ int ret, val = 0;
+ struct mt6392_regulator_info *info = rdev_get_drvdata(rdev);
+
+ switch (mode) {
+ case REGULATOR_MODE_STANDBY:
+ val = MT6392_LDO_MODE_LP;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = MT6392_LDO_MODE_NORMAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val <<= ffs(info->modeset_mask) - 1;
+
+ ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+ info->modeset_mask, val);
+
+ return ret;
+}
+
+static unsigned int mt6392_ldo_get_mode(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ unsigned int mode;
+ int ret;
+ struct mt6392_regulator_info *info = rdev_get_drvdata(rdev);
+
+ ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= info->modeset_mask;
+ val >>= ffs(info->modeset_mask) - 1;
+
+ if (val & 0x1)
+ mode = REGULATOR_MODE_STANDBY;
+ else
+ mode = REGULATOR_MODE_NORMAL;
+
+ return mode;
+}
+
+static const struct regulator_ops mt6392_volt_range_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = mt6392_buck_set_mode,
+ .get_mode = mt6392_buck_get_mode,
+};
+
+static const struct regulator_ops mt6392_volt_table_ops = {
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_iterate,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = mt6392_ldo_set_mode,
+ .get_mode = mt6392_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6392_volt_ldo_range_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = mt6392_ldo_set_mode,
+ .get_mode = mt6392_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6392_volt_fixed_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_mode = mt6392_ldo_set_mode,
+ .get_mode = mt6392_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6392_volt_fixed_no_mode_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+/* The array is indexed by id(MT6392_ID_XXX) */
+static struct mt6392_regulator_info mt6392_regulators[] = {
+ MT6392_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250,
+ buck_volt_range1, MT6392_VPROC_CON7, MT6392_VPROC_CON9, 0x7f,
+ MT6392_VPROC_CON10, MT6392_VPROC_CON5, MT6392_VPROC_CON2, 0x100,
+ 12500),
+ MT6392_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500,
+ buck_volt_range2, MT6392_VSYS_CON7, MT6392_VSYS_CON9, 0x7f,
+ MT6392_VSYS_CON10, MT6392_VSYS_CON5, MT6392_VSYS_CON2, 0x100,
+ 25000),
+ MT6392_BUCK("buck_vcore", VCORE, 700000, 1493750, 6250,
+ buck_volt_range1, MT6392_VCORE_CON7, MT6392_VCORE_CON9, 0x7f,
+ MT6392_VCORE_CON10, MT6392_VCORE_CON5, MT6392_VCORE_CON2, 0x100,
+ 12500),
+ MT6392_REG_FIXED("ldo_vxo22", VXO22, MT6392_ANALDO_CON1, 10, 2200000,
+ MT6392_ANALDO_CON1, 0x2, 110),
+ MT6392_LDO("ldo_vaud22", VAUD22, ldo_volt_table1,
+ MT6392_ANALDO_CON2, 14, MT6392_ANALDO_CON8, 0x60,
+ MT6392_ANALDO_CON2, 0x2, 264),
+ MT6392_REG_FIXED_NO_MODE("ldo_vcama", VCAMA, MT6392_ANALDO_CON4, 15,
+ 2800000, 264),
+ MT6392_REG_FIXED("ldo_vaud28", VAUD28, MT6392_ANALDO_CON23, 14, 2800000,
+ MT6392_ANALDO_CON23, 0x2, 264),
+ MT6392_REG_FIXED("ldo_vadc18", VADC18, MT6392_ANALDO_CON25, 14, 1800000,
+ MT6392_ANALDO_CON25, 0x2, 264),
+ MT6392_LDO_LINEAR("ldo_vcn35", VCN35, 3300000, 3600000, 100000,
+ ldo_volt_range2, MT6392_ANALDO_CON21, 12,
+ MT6392_ANALDO_CON16, 0xC, MT6392_ANALDO_CON21, 0x2, 264),
+ MT6392_REG_FIXED("ldo_vio28", VIO28, MT6392_DIGLDO_CON0, 14, 2800000,
+ MT6392_DIGLDO_CON0, 0x2, 264),
+ MT6392_REG_FIXED("ldo_vusb", VUSB, MT6392_DIGLDO_CON2, 14, 3300000,
+ MT6392_DIGLDO_CON2, 0x2, 264),
+ MT6392_LDO("ldo_vmc", VMC, ldo_volt_table3,
+ MT6392_DIGLDO_CON3, 12, MT6392_DIGLDO_CON24, 0x10,
+ MT6392_DIGLDO_CON3, 0x2, 264),
+ MT6392_LDO("ldo_vmch", VMCH, ldo_volt_table4,
+ MT6392_DIGLDO_CON5, 14, MT6392_DIGLDO_CON26, 0x80,
+ MT6392_DIGLDO_CON5, 0x2, 264),
+ MT6392_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4,
+ MT6392_DIGLDO_CON6, 14, MT6392_DIGLDO_CON27, 0x80,
+ MT6392_DIGLDO_CON6, 0x2, 264),
+ MT6392_LDO("ldo_vgp1", VGP1, ldo_volt_table5,
+ MT6392_DIGLDO_CON7, 15, MT6392_DIGLDO_CON28, 0xE0,
+ MT6392_DIGLDO_CON7, 0x2, 264),
+ MT6392_LDO("ldo_vgp2", VGP2, ldo_volt_table5,
+ MT6392_DIGLDO_CON8, 15, MT6392_DIGLDO_CON29, 0xE0,
+ MT6392_DIGLDO_CON8, 0x2, 264),
+ MT6392_REG_FIXED("ldo_vcn18", VCN18, MT6392_DIGLDO_CON11, 14, 1800000,
+ MT6392_DIGLDO_CON11, 0x2, 264),
+ MT6392_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5,
+ MT6392_DIGLDO_CON31, 15, MT6392_DIGLDO_CON32, 0xE0,
+ MT6392_DIGLDO_CON31, 0x2, 264),
+ MT6392_LDO("ldo_vm", VM, ldo_volt_table6,
+ MT6392_DIGLDO_CON47, 14, MT6392_DIGLDO_CON48, 0x30,
+ MT6392_DIGLDO_CON47, 0x2, 264),
+ MT6392_REG_FIXED("ldo_vio18", VIO18, MT6392_DIGLDO_CON49, 14, 1800000,
+ MT6392_DIGLDO_CON49, 0x2, 264),
+ MT6392_LDO("ldo_vcamd", VCAMD, ldo_volt_table7,
+ MT6392_DIGLDO_CON51, 14, MT6392_DIGLDO_CON52, 0x60,
+ MT6392_DIGLDO_CON51, 0x2, 264),
+ MT6392_REG_FIXED("ldo_vcamio", VCAMIO, MT6392_DIGLDO_CON53, 14, 1800000,
+ MT6392_DIGLDO_CON53, 0x2, 264),
+ MT6392_REG_FIXED("ldo_vm25", VM25, MT6392_DIGLDO_CON55, 14, 2500000,
+ MT6392_DIGLDO_CON55, 0x2, 264),
+ MT6392_LDO("ldo_vefuse", VEFUSE, ldo_volt_table8,
+ MT6392_DIGLDO_CON57, 14, MT6392_DIGLDO_CON58, 0x10,
+ MT6392_DIGLDO_CON57, 0x2, 264),
+};
+
+static int mt6392_set_buck_vosel_reg(struct platform_device *pdev)
+{
+ struct mt6397_chip *mt6392 = dev_get_drvdata(pdev->dev.parent);
+ int i;
+ u32 regval;
+
+ for (i = 0; i < MT6392_MAX_REGULATOR; i++) {
+ if (mt6392_regulators[i].vselctrl_reg) {
+ if (regmap_read(mt6392->regmap,
+ mt6392_regulators[i].vselctrl_reg,
+ ®val) < 0) {
+ dev_err(&pdev->dev,
+ "Failed to read buck ctrl\n");
+ return -EIO;
+ }
+
+ if (regval & mt6392_regulators[i].vselctrl_mask) {
+ mt6392_regulators[i].desc.vsel_reg =
+ mt6392_regulators[i].vselon_reg;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int mt6392_regulator_probe(struct platform_device *pdev)
+{
+ struct mt6397_chip *mt6392 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = {};
+ struct regulator_dev *rdev;
+ int i;
+
+ /* Query buck controller to select activated voltage register part */
+ if (mt6392_set_buck_vosel_reg(pdev))
+ return -EIO;
+
+ for (i = 0; i < MT6392_MAX_REGULATOR; i++) {
+ config.dev = &pdev->dev;
+ config.driver_data = &mt6392_regulators[i];
+ config.regmap = mt6392->regmap;
+
+ rdev = devm_regulator_register(&pdev->dev,
+ &mt6392_regulators[i].desc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register %s\n",
+ mt6392_regulators[i].desc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id mt6392_platform_ids[] = {
+ {"mt6392-regulator", 0},
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6392_platform_ids);
+
+static struct platform_driver mt6392_regulator_driver = {
+ .driver = {
+ .name = "mt6392-regulator",
+ },
+ .probe = mt6392_regulator_probe,
+ .id_table = mt6392_platform_ids,
+};
+
+module_platform_driver(mt6392_regulator_driver);
+
+MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6392 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/mt6392-regulator.h b/include/linux/regulator/mt6392-regulator.h
new file mode 100644
index 000000000000..20d80dfc8783
--- /dev/null
+++ b/include/linux/regulator/mt6392-regulator.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ */
+
+#ifndef __LINUX_REGULATOR_MT6392_H
+#define __LINUX_REGULATOR_MT6392_H
+
+enum {
+ MT6392_ID_VPROC = 0,
+ MT6392_ID_VSYS,
+ MT6392_ID_VCORE,
+ MT6392_ID_VXO22,
+ MT6392_ID_VAUD22,
+ MT6392_ID_VCAMA,
+ MT6392_ID_VAUD28,
+ MT6392_ID_VADC18,
+ MT6392_ID_VCN35,
+ MT6392_ID_VIO28,
+ MT6392_ID_VUSB = 10,
+ MT6392_ID_VMC,
+ MT6392_ID_VMCH,
+ MT6392_ID_VEMC3V3,
+ MT6392_ID_VGP1,
+ MT6392_ID_VGP2,
+ MT6392_ID_VCN18,
+ MT6392_ID_VCAMAF,
+ MT6392_ID_VM,
+ MT6392_ID_VIO18,
+ MT6392_ID_VCAMD,
+ MT6392_ID_VCAMIO,
+ MT6392_ID_VM25,
+ MT6392_ID_VEFUSE,
+ MT6392_ID_RG_MAX,
+};
+
+#define MT6392_MAX_REGULATOR MT6392_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_MT6392_H */
--
2.43.0
^ permalink raw reply related
* [PATCH v3 8/9] pinctrl: mediatek: mt6397: Add support for MT6392 variant
From: Luca Leonardo Scorcia @ 2026-03-17 18:43 UTC (permalink / raw)
To: linux-mediatek
Cc: Luca Leonardo Scorcia, Dmitry Torokhov, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sen Chu, Sean Wang,
Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Gary Bisson, Julien Massot, Louis-Alexis Eyraud,
Val Packett, Fabien Parent, Chen Zhong, linux-input, devicetree,
linux-kernel, linux-pm, linux-arm-kernel, linux-gpio
In-Reply-To: <20260317184507.523060-1-l.scorcia@gmail.com>
Add support for the MT6392 pinctrl device, which is very similar to
MT6397 with a handful of different property values and its own pins
definition.
Update the MT6397 driver to retrieve device data from the match table and
use it for driver init.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
drivers/pinctrl/mediatek/pinctrl-mt6397.c | 37 ++++++++++-
drivers/pinctrl/mediatek/pinctrl-mtk-mt6392.h | 64 +++++++++++++++++++
2 files changed, 99 insertions(+), 2 deletions(-)
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt6392.h
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6397.c b/drivers/pinctrl/mediatek/pinctrl-mt6397.c
index 03d0f65d7bcc..8ba02e70595c 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt6397.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt6397.c
@@ -12,10 +12,32 @@
#include <linux/mfd/mt6397/core.h>
#include "pinctrl-mtk-common.h"
+#include "pinctrl-mtk-mt6392.h"
#include "pinctrl-mtk-mt6397.h"
#define MT6397_PIN_REG_BASE 0xc000
+static const struct mtk_pinctrl_devdata mt6392_pinctrl_data = {
+ .pins = mtk_pins_mt6392,
+ .npins = ARRAY_SIZE(mtk_pins_mt6392),
+ .dir_offset = (MT6397_PIN_REG_BASE + 0x000),
+ .ies_offset = MTK_PINCTRL_NOT_SUPPORT,
+ .smt_offset = MTK_PINCTRL_NOT_SUPPORT,
+ .pullen_offset = (MT6397_PIN_REG_BASE + 0x020),
+ .pullsel_offset = (MT6397_PIN_REG_BASE + 0x040),
+ .dout_offset = (MT6397_PIN_REG_BASE + 0x080),
+ .din_offset = (MT6397_PIN_REG_BASE + 0x0a0),
+ .pinmux_offset = (MT6397_PIN_REG_BASE + 0x0c0),
+ .type1_start = 7,
+ .type1_end = 7,
+ .port_shf = 3,
+ .port_mask = 0x3,
+ .port_align = 2,
+ .mode_mask = 0xf,
+ .mode_per_reg = 5,
+ .mode_shf = 4,
+};
+
static const struct mtk_pinctrl_devdata mt6397_pinctrl_data = {
.pins = mtk_pins_mt6397,
.npins = ARRAY_SIZE(mtk_pins_mt6397),
@@ -40,13 +62,24 @@ static const struct mtk_pinctrl_devdata mt6397_pinctrl_data = {
static int mt6397_pinctrl_probe(struct platform_device *pdev)
{
struct mt6397_chip *mt6397;
+ const struct mtk_pinctrl_devdata *data;
+
+ data = device_get_match_data(&pdev->dev);
+ if (!data)
+ return -ENOENT;
mt6397 = dev_get_drvdata(pdev->dev.parent);
- return mtk_pctrl_init(pdev, &mt6397_pinctrl_data, mt6397->regmap);
+ return mtk_pctrl_init(pdev, data, mt6397->regmap);
}
static const struct of_device_id mt6397_pctrl_match[] = {
- { .compatible = "mediatek,mt6397-pinctrl", },
+ {
+ .compatible = "mediatek,mt6392-pinctrl",
+ .data = &mt6392_pinctrl_data
+ }, {
+ .compatible = "mediatek,mt6397-pinctrl",
+ .data = &mt6397_pinctrl_data
+ },
{ }
};
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-mt6392.h b/drivers/pinctrl/mediatek/pinctrl-mtk-mt6392.h
new file mode 100644
index 000000000000..e7241af28fdb
--- /dev/null
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-mt6392.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PINCTRL_MTK_MT6392_H
+#define __PINCTRL_MTK_MT6392_H
+
+#include <linux/pinctrl/pinctrl.h>
+#include "pinctrl-mtk-common.h"
+
+static const struct mtk_desc_pin mtk_pins_mt6392[] = {
+ MTK_PIN(PINCTRL_PIN(0, "INT"),
+ NULL, "mt6392",
+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+ MTK_FUNCTION(0, "GPIO0"),
+ MTK_FUNCTION(1, "INT"),
+ MTK_FUNCTION(5, "TEST_CK2"),
+ MTK_FUNCTION(6, "TEST_IN1"),
+ MTK_FUNCTION(7, "TEST_OUT1")
+ ),
+ MTK_PIN(PINCTRL_PIN(1, "SRCLKEN"),
+ NULL, "mt6392",
+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+ MTK_FUNCTION(0, "GPIO1"),
+ MTK_FUNCTION(1, "SRCLKEN"),
+ MTK_FUNCTION(5, "TEST_CK0"),
+ MTK_FUNCTION(6, "TEST_IN2"),
+ MTK_FUNCTION(7, "TEST_OUT2")
+ ),
+ MTK_PIN(PINCTRL_PIN(2, "RTC_32K1V8"),
+ NULL, "mt6392",
+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+ MTK_FUNCTION(0, "GPIO2"),
+ MTK_FUNCTION(1, "RTC_32K1V8"),
+ MTK_FUNCTION(5, "TEST_CK1"),
+ MTK_FUNCTION(6, "TEST_IN3"),
+ MTK_FUNCTION(7, "TEST_OUT3")
+ ),
+ MTK_PIN(PINCTRL_PIN(3, "SPI_CLK"),
+ NULL, "mt6392",
+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+ MTK_FUNCTION(0, "GPIO3"),
+ MTK_FUNCTION(1, "SPI_CLK")
+ ),
+ MTK_PIN(PINCTRL_PIN(4, "SPI_CSN"),
+ NULL, "mt6392",
+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+ MTK_FUNCTION(0, "GPIO4"),
+ MTK_FUNCTION(1, "SPI_CSN")
+ ),
+ MTK_PIN(PINCTRL_PIN(5, "SPI_MOSI"),
+ NULL, "mt6392",
+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+ MTK_FUNCTION(0, "GPIO5"),
+ MTK_FUNCTION(1, "SPI_MOSI")
+ ),
+ MTK_PIN(PINCTRL_PIN(6, "SPI_MISO"),
+ NULL, "mt6392",
+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+ MTK_FUNCTION(0, "GPIO6"),
+ MTK_FUNCTION(1, "SPI_MISO"),
+ MTK_FUNCTION(6, "TEST_IN4"),
+ MTK_FUNCTION(7, "TEST_OUT4")
+ ),
+};
+
+#endif /* __PINCTRL_MTK_MT6392_H */
--
2.43.0
^ permalink raw reply related
* [PATCH v3 9/9] arm64: dts: mt6392: add mt6392 PMIC dtsi
From: Luca Leonardo Scorcia @ 2026-03-17 18:43 UTC (permalink / raw)
To: linux-mediatek
Cc: Val Packett, Luca Leonardo Scorcia, Dmitry Torokhov, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sen Chu, Sean Wang,
Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Gary Bisson, Julien Massot, Louis-Alexis Eyraud,
Fabien Parent, Chen Zhong, linux-input, devicetree, linux-kernel,
linux-pm, linux-arm-kernel, linux-gpio
In-Reply-To: <20260317184507.523060-1-l.scorcia@gmail.com>
From: Val Packett <val@packett.cool>
Add the dts to be included by all boards using the MT6392 PMIC.
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
arch/arm64/boot/dts/mediatek/mt6392.dtsi | 141 +++++++++++++++++++++++
1 file changed, 141 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt6392.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/mt6392.dtsi b/arch/arm64/boot/dts/mediatek/mt6392.dtsi
new file mode 100644
index 000000000000..fbf6f671524c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6392.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Copyright (c) 2024 Val Packett <val@packett.cool>
+ */
+
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+ pmic: pmic {
+ compatible = "mediatek,mt6392", "mediatek,mt6323";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ keys {
+ compatible = "mediatek,mt6392-keys";
+
+ key-power {
+ linux,keycodes = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ key-home {
+ linux,keycodes = <KEY_HOME>;
+ wakeup-source;
+ };
+ };
+
+ pio6392: pinctrl {
+ compatible = "mediatek,mt6392-pinctrl";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc {
+ compatible = "mediatek,mt6392-rtc",
+ "mediatek,mt6323-rtc";
+ };
+
+ regulators {
+ compatible = "mediatek,mt6392-regulator";
+
+ mt6392_vproc_reg: buck_vproc {
+ regulator-name = "vproc";
+ };
+
+ mt6392_vsys_reg: buck_vsys {
+ regulator-name = "vsys";
+ };
+
+ mt6392_vcore_reg: buck_vcore {
+ regulator-name = "vcore";
+ };
+
+ mt6392_vxo22_reg: ldo_vxo22 {
+ regulator-name = "vxo22";
+ };
+
+ mt6392_vaud22_reg: ldo_vaud22 {
+ regulator-name = "vaud22";
+ };
+
+ mt6392_vcama_reg: ldo_vcama {
+ regulator-name = "vcama";
+ };
+
+ mt6392_vaud28_reg: ldo_vaud28 {
+ regulator-name = "vaud28";
+ };
+
+ mt6392_vadc18_reg: ldo_vadc18 {
+ regulator-name = "vadc18";
+ };
+
+ mt6392_vcn35_reg: ldo_vcn35 {
+ regulator-name = "vcn35";
+ };
+
+ mt6392_vio28_reg: ldo_vio28 {
+ regulator-name = "vio28";
+ };
+
+ mt6392_vusb_reg: ldo_vusb {
+ regulator-name = "vusb";
+ };
+
+ mt6392_vmc_reg: ldo_vmc {
+ regulator-name = "vmc";
+ };
+
+ mt6392_vmch_reg: ldo_vmch {
+ regulator-name = "vmch";
+ };
+
+ mt6392_vemc3v3_reg: ldo_vemc3v3 {
+ regulator-name = "vemc3v3";
+ };
+
+ mt6392_vgp1_reg: ldo_vgp1 {
+ regulator-name = "vgp1";
+ };
+
+ mt6392_vgp2_reg: ldo_vgp2 {
+ regulator-name = "vgp2";
+ };
+
+ mt6392_vcn18_reg: ldo_vcn18 {
+ regulator-name = "vcn18";
+ };
+
+ mt6392_vcamaf_reg: ldo_vcamaf {
+ regulator-name = "vcamaf";
+ };
+
+ mt6392_vm_reg: ldo_vm {
+ regulator-name = "vm";
+ };
+
+ mt6392_vio18_reg: ldo_vio18 {
+ regulator-name = "vio18";
+ };
+
+ mt6392_vcamd_reg: ldo_vcamd {
+ regulator-name = "vcamd";
+ };
+
+ mt6392_vcamio_reg: ldo_vcamio {
+ regulator-name = "vcamio";
+ };
+
+ mt6392_vm25_reg: ldo_vm25 {
+ regulator-name = "vm25";
+ };
+
+ mt6392_vefuse_reg: ldo_vefuse {
+ regulator-name = "vefuse";
+ };
+ };
+ };
+};
--
2.43.0
^ permalink raw reply related
* Re: [PATCH v1] input: xpad: Add support for BETOP BTP-KP50B/C controller's wireless mode
From: Shengyu Qu @ 2026-03-17 19:38 UTC (permalink / raw)
To: dmitry.torokhov, vi, lkml, niltonperimneto, linux-input,
linux-kernel
Cc: wiagn233
In-Reply-To: <TY4PR01MB1443218CD6B7089D3DBF893989899A@TY4PR01MB14432.jpnprd01.prod.outlook.com>
[-- Attachment #1.1.1: Type: text/plain, Size: 1898 bytes --]
Gently ping.
在 2026/2/5 22:15, Shengyu Qu 写道:
> BETOP's BTP-KP50B and BTP-KP50C controller's wireless dongles are both
> working as standard Xbox 360 controllers. Add USB device IDs for them to
> xpad driver.
>
> Both controllers can't work as Xbox controllers when using wired mode and
> have different USB IDs.
>
> Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
> ---
> drivers/input/joystick/xpad.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
> index 363d50949386..260dd41ea6e5 100644
> --- a/drivers/input/joystick/xpad.c
> +++ b/drivers/input/joystick/xpad.c
> @@ -360,6 +360,8 @@ static const struct xpad_device {
> { 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
> { 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
> { 0x1ee9, 0x1590, "ZOTAC Gaming Zone", 0, XTYPE_XBOX360 },
> + { 0x20bc, 0x5134, "BETOP BTP-KP50B Xinput Dongle", 0, XTYPE_XBOX360 },
> + { 0x20bc, 0x514a, "BETOP BTP-KP50C Xinput Dongle", 0, XTYPE_XBOX360 },
> { 0x20d6, 0x2001, "BDA Xbox Series X Wired Controller", 0, XTYPE_XBOXONE },
> { 0x20d6, 0x2009, "PowerA Enhanced Wired Controller for Xbox Series X|S", 0, XTYPE_XBOXONE },
> { 0x20d6, 0x2064, "PowerA Wired Controller for Xbox", MAP_SHARE_BUTTON, XTYPE_XBOXONE },
> @@ -562,6 +564,7 @@ static const struct usb_device_id xpad_table[] = {
> XPAD_XBOX360_VENDOR(0x1a86), /* Nanjing Qinheng Microelectronics (WCH) */
> XPAD_XBOX360_VENDOR(0x1bad), /* Harmonix Rock Band guitar and drums */
> XPAD_XBOX360_VENDOR(0x1ee9), /* ZOTAC Technology Limited */
> + XPAD_XBOX360_VENDOR(0x20bc), /* BETOP wireless dongles */
> XPAD_XBOX360_VENDOR(0x20d6), /* PowerA controllers */
> XPAD_XBOXONE_VENDOR(0x20d6), /* PowerA controllers */
> XPAD_XBOX360_VENDOR(0x2345), /* Machenike Controllers */
[-- Attachment #1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 6977 bytes --]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]
^ permalink raw reply
* Re: [PATCH v1] HID: rakk: add support for Rakk Dasig X side buttons
From: Terry Junge @ 2026-03-17 20:50 UTC (permalink / raw)
To: Karl Cayme, jikos, bentiss; +Cc: linux-input, linux-kernel
In-Reply-To: <20260225155645.83981-1-kcayme@gmail.com>
On 2/25/26 7:56 AM, Karl Cayme wrote:
> The Rakk Dasig X gaming mouse has a faulty HID report descriptor that
> declares USAGE_MAXIMUM=3 (buttons 1-3) while actually sending 5 button
> bits (REPORT_COUNT=5). This causes the kernel to ignore side buttons
> (buttons 4 and 5).
>
> Fix by patching the descriptor to set USAGE_MAXIMUM=5 in the
> report_fixup callback.
>
> The mouse uses Telink vendor ID 0x248a with three product IDs for USB
> direct (0xfb01), wireless dongle (0xfa02), and Bluetooth (0x8266)
> connection modes. All three variants have the same bug at byte offset 17.
>
> Signed-off-by: Karl Cayme <kcayme@gmail.com>
> ---
> drivers/hid/Kconfig | 8 +++++
> drivers/hid/Makefile | 1 +
> drivers/hid/hid-ids.h | 5 +++
> drivers/hid/hid-rakk.c | 72 ++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 86 insertions(+)
> create mode 100644 drivers/hid/hid-rakk.c
>
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index c1d9f7c6a5f2..930ea0773169 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
> @@ -755,6 +755,14 @@ config HID_MEGAWORLD_FF
> Say Y here if you have a Mega World based game controller and want
> to have force feedback support for it.
>
> +config HID_RAKK
> + tristate "Rakk support"
> + help
> + Support for Rakk gaming peripherals.
> +
> + Fixes the HID report descriptor of the Rakk Dasig X mouse,
> + which declares only 3 buttons instead of 5.
> +
> config HID_REDRAGON
> tristate "Redragon keyboards"
> default !EXPERT
> diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> index e01838239ae6..7800613f5b2b 100644
> --- a/drivers/hid/Makefile
> +++ b/drivers/hid/Makefile
> @@ -113,6 +113,7 @@ obj-$(CONFIG_HID_PLANTRONICS) += hid-plantronics.o
> obj-$(CONFIG_HID_PLAYSTATION) += hid-playstation.o
> obj-$(CONFIG_HID_PRIMAX) += hid-primax.o
> obj-$(CONFIG_HID_PXRC) += hid-pxrc.o
> +obj-$(CONFIG_HID_RAKK) += hid-rakk.o
> obj-$(CONFIG_HID_RAPOO) += hid-rapoo.o
> obj-$(CONFIG_HID_RAZER) += hid-razer.o
> obj-$(CONFIG_HID_REDRAGON) += hid-redragon.o
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 3e299a30dcde..68fab837e8b3 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -1369,6 +1369,11 @@
> #define USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_017 0x73f6
> #define USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5 0x81a7
>
> +#define USB_VENDOR_ID_TELINK 0x248a
> +#define USB_DEVICE_ID_TELINK_RAKK_DASIG_X 0xfb01
> +#define USB_DEVICE_ID_TELINK_RAKK_DASIG_X_DONGLE 0xfa02
> +#define USB_DEVICE_ID_TELINK_RAKK_DASIG_X_BT 0x8266
> +
> #define USB_VENDOR_ID_TEXAS_INSTRUMENTS 0x2047
> #define USB_DEVICE_ID_TEXAS_INSTRUMENTS_LENOVO_YOGA 0x0855
>
> diff --git a/drivers/hid/hid-rakk.c b/drivers/hid/hid-rakk.c
> new file mode 100644
> index 000000000000..c2b969ce7259
> --- /dev/null
> +++ b/drivers/hid/hid-rakk.c
> @@ -0,0 +1,72 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * HID driver for Rakk devices
> + *
> + * Copyright (c) 2025 Karl Cayme
> + *
> + * The Rakk Dasig X gaming mouse has a faulty HID report descriptor that
> + * declares USAGE_MAXIMUM = 3 (buttons 1-3) while actually sending 5 button
> + * bits (REPORT_COUNT = 5). This causes the kernel to ignore side buttons
> + * (buttons 4 and 5). This driver fixes the descriptor so all 5 buttons
> + * are properly recognized across 3 modes (wired, dongle, and Bluetooth).
> + */
> +
> +#include <linux/device.h>
> +#include <linux/hid.h>
> +#include <linux/module.h>
> +#include "hid-ids.h"
> +
> +/*
> + * The faulty byte is at offset 17 in the report descriptor for all three
> + * connection modes (USB direct, wireless dongle, and Bluetooth).
> + *
> + * Bytes 16-17 are: 0x29 0x03 (USAGE_MAXIMUM = 3)
> + * The fix changes byte 17 to 0x05 (USAGE_MAXIMUM = 5).
> + *
> + * Original descriptor bytes 0-17:
> + * 05 01 09 02 a1 01 85 01 09 01 a1 00 05 09 19 01 29 03
> + * ^^
> + * Should be 0x05 to declare 5 buttons instead of 3.
> + */
> +#define RAKK_RDESC_USAGE_MAX_OFFSET 17
> +#define RAKK_RDESC_USAGE_MAX_ORIG 0x03
> +#define RAKK_RDESC_USAGE_MAX_FIXED 0x05
> +#define RAKK_RDESC_USB_SIZE 193
> +#define RAKK_RDESC_DONGLE_SIZE 150
> +#define RAKK_RDESC_BT_SIZE 89
> +
> +static const __u8 *rakk_report_fixup(struct hid_device *hdev, __u8 *rdesc,
> + unsigned int *rsize)
> +{
> + if ((*rsize == RAKK_RDESC_USB_SIZE ||
> + *rsize == RAKK_RDESC_DONGLE_SIZE ||
> + *rsize == RAKK_RDESC_BT_SIZE) &&
These should be checking the PID to match with its size.
((*rsize == USB size && PID == USB PID) ||
(*rsize == DONGLE size && PID == DONGLE PID) ||
(*rsize == BT size && PID == BT PID)) &&
Thanks,
Terry
> + rdesc[RAKK_RDESC_USAGE_MAX_OFFSET] == RAKK_RDESC_USAGE_MAX_ORIG) {
> + hid_info(hdev, "fixing Rakk Dasig X button count (3 -> 5)\n");
> + rdesc[RAKK_RDESC_USAGE_MAX_OFFSET] = RAKK_RDESC_USAGE_MAX_FIXED;
> + }
> +
> + return rdesc;
> +}
> +
> +static const struct hid_device_id rakk_devices[] = {
> + { HID_USB_DEVICE(USB_VENDOR_ID_TELINK,
> + USB_DEVICE_ID_TELINK_RAKK_DASIG_X) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_TELINK,
> + USB_DEVICE_ID_TELINK_RAKK_DASIG_X_DONGLE) },
> + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_TELINK,
> + USB_DEVICE_ID_TELINK_RAKK_DASIG_X_BT) },
> + { }
> +};
> +MODULE_DEVICE_TABLE(hid, rakk_devices);
> +
> +static struct hid_driver rakk_driver = {
> + .name = "rakk",
> + .id_table = rakk_devices,
> + .report_fixup = rakk_report_fixup,
> +};
> +module_hid_driver(rakk_driver);
> +
> +MODULE_DESCRIPTION("HID driver for Rakk Dasig X mouse - fix side button support");
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Karl Cayme");
^ permalink raw reply
* Re: [PATCH 0/2] Add THC Nova Lake device IDs
From: Jiri Kosina @ 2026-03-17 23:01 UTC (permalink / raw)
To: Even Xu; +Cc: bentiss, srinivas.pandruvada, linux-input, linux-kernel
In-Reply-To: <20260317055629.3877299-1-even.xu@intel.com>
On Tue, 17 Mar 2026, Even Xu wrote:
> Add THC Device IDs for Nova Lake platform.
>
> Even Xu (2):
> Hid: Intel-thc-hid: Intel-quicki2c: Add NVL Device IDs
> Hid: Intel-thc-hid: Intel-quickspi: Add NVL Device IDs
Thanks for the patches, applied to hid.git#for-7.0/upstream-fixes.
(for your next submissions, please follow the subsystem standard
convention and use prefix 'HID:' for the shortlog, thanks!)
--
Jiri Kosina
SUSE Labs
^ permalink raw reply
* RE: [PATCH 0/2] Add THC Nova Lake device IDs
From: Xu, Even @ 2026-03-18 0:48 UTC (permalink / raw)
To: Jiri Kosina
Cc: bentiss@kernel.org, srinivas.pandruvada@linux.intel.com,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
In-Reply-To: <q73969s9-n2r4-10rp-1459-3nnp0322ro9p@xreary.bet>
Thanks Jiri!
Best Regards,
Even Xu
> -----Original Message-----
> From: Jiri Kosina <jikos@kernel.org>
> Sent: Wednesday, March 18, 2026 7:01 AM
> To: Xu, Even <even.xu@intel.com>
> Cc: bentiss@kernel.org; srinivas.pandruvada@linux.intel.com; linux-
> input@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 0/2] Add THC Nova Lake device IDs
>
> On Tue, 17 Mar 2026, Even Xu wrote:
>
> > Add THC Device IDs for Nova Lake platform.
> >
> > Even Xu (2):
> > Hid: Intel-thc-hid: Intel-quicki2c: Add NVL Device IDs
> > Hid: Intel-thc-hid: Intel-quickspi: Add NVL Device IDs
>
> Thanks for the patches, applied to hid.git#for-7.0/upstream-fixes.
>
> (for your next submissions, please follow the subsystem standard convention and
> use prefix 'HID:' for the shortlog, thanks!)
>
> --
> Jiri Kosina
> SUSE Labs
^ permalink raw reply
* Re: [PATCH v8 0/3] TrackPoint doubletap enablement and user control
From: Vishnu Sankar @ 2026-03-18 1:35 UTC (permalink / raw)
To: Ilpo Järvinen
Cc: mpearson-lenovo, dmitry.torokhov, hmh, hansg, corbet,
derekjohn.clark, linux-input, linux-kernel, ibm-acpi-devel,
linux-doc, platform-driver-x86, vsankar
In-Reply-To: <177376698425.15640.5695107795590543274.b4-ty@linux.intel.com>
Hi Ilpo,
Thank you for accepting this.
On Wed, Mar 18, 2026 at 2:03 AM Ilpo Järvinen
<ilpo.jarvinen@linux.intel.com> wrote:
>
> On Wed, 11 Mar 2026 23:31:41 +0900, Vishnu Sankar wrote:
>
> > This patch series adds support for TrackPoint doubletap with a clear and
> > simple separation of responsibilities between drivers:
> >
> > 1. Firmware enablement (trackpoint.c):
> > Automatically enables doubletap on capable hardware during device
> > detection.
> >
> > [...]
>
>
> Thank you for your contribution, it has been applied to my local
> review-ilpo-next branch. Note it will show up in the public
> platform-drivers-x86/review-ilpo-next branch only once I've pushed my
> local branch there, which might take a while.
Acked.
>
> The list of commits applied:
> [1/3] input: trackpoint - Enable doubletap by default on capable devices
> commit: 9a98ebe630cf13c1a6063afa676d1cecc44fb2c9
> [2/3] platform/x86: thinkpad_acpi: Add sysfs control for TrackPoint double-tap
> commit: 6227cc32fa01ffbf5bef8dcc6759743a28a2ad57
> [3/3] Documentation: thinkpad-acpi - Document doubletap_enable attribute
> commit: fa5062e99b984448b7c8ca9aea47e7fc033b6e2f
>
> --
> i.
>
--
Regards,
Vishnu Sankar
^ permalink raw reply
* Re: [PATCH v2] dt-bindings: input: touchscreen: ti,tsc2005: Add wakeup-source
From: Bui Duc Phuc @ 2026-03-18 2:30 UTC (permalink / raw)
To: Conor Dooley
Cc: Krzysztof Kozlowski, robh, conor+dt, devicetree, dmitry.torokhov,
krzk+dt, linux-input, linux-kernel, marex, mingo, tglx
In-Reply-To: <20260317-another-wrongdoer-5b4c56ab6027@spud>
Hi Conor, Krzysztof,
Thanks for the review.
I will remove the extra blank line in the next version.
As for the wakeup-source property, I'll keep it as a boolean as per the current
patch.
Best Regards,
Phuc
On Tue, Mar 17, 2026 at 7:14 PM Conor Dooley <conor@kernel.org> wrote:
>
> On Mon, Mar 16, 2026 at 06:10:23PM +0100, Krzysztof Kozlowski wrote:
> > On 16/03/2026 12:13, Conor Dooley wrote:
> > > On Mon, Mar 16, 2026 at 10:46:06AM +0700, phucduc.bui@gmail.com wrote:
> > >> From: bui duc phuc <phucduc.bui@gmail.com>
> > >>
> > >> Document the "wakeup-source" property for the ti,tsc2005 touchscreen
> > >> controllers to allow the device to wake the system from suspend.
> > >>
> > >> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
> > >> ---
> > >> .../devicetree/bindings/input/touchscreen/ti,tsc2005.yaml | 7 +++++++
> > >> 1 file changed, 7 insertions(+)
> > >>
> > >> diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
> > >> index 7187c390b2f5..c0aae044d7d4 100644
> > >> --- a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
> > >> +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
> > >> @@ -55,6 +55,9 @@ properties:
> > >> touchscreen-size-x: true
> > >> touchscreen-size-y: true
> > >>
> > >> + wakeup-source:
> > >> + type: boolean
> > >
> > > wakeup-source: true
> >
> > I am not so sure.
> >
> > The property is multi-type, so we want to choose one - bool, IMO,
> > because device cannot wakeup the specific system idle states. Or am I
> > misinterpreting the phandles behind wakeup-source and every device can
> > be differently routed in such system?
>
> I checked before my original comment, and there there's a bout a 2:1
> ratio of defined v true. I suppose my comment can be ignored, I am just
> used to this always being true.
^ permalink raw reply
* [PATCH v2 0/3] HID: nintendo: Add preliminary Switch 2 controller driver
From: Vicki Pfau @ 2026-03-18 3:08 UTC (permalink / raw)
To: Dmitry Torokhov, Jiri Kosina, Benjamin Tissoires, linux-input; +Cc: Vicki Pfau
This series adds preliminary support for Switch 2 controllers. As with v1,
it does not support Bluetooth controllers and does not contain IMU or
battery support. However, several significant changes have been made:
First and foremost, the driver has been folded into hid-nintendo instead of
a separate hid-switch2 driver. This allowed reuse of some small bits of
hid-nintendo's existing support, but not a signiicant amount.
Secondly, the configuration interface API has been changed to make the
switch2_controller struct opaque. As the configuration interface is
effectively just a dumb sidechannel used for passing data that is the same
regardless of transit, there is no need for it to have any internal state
knowledge.
Thirdly, it adds support for "unified" format that had been left as a TODO
in the previous version. Though it does not directly enable said format,
it's good to have for future purposes.
It also addresses the other TODO regarding partial initialization,
guaranteeing a consistent state after setup, regardless of whether or not
an userspace process has claimed an then released control of the USB
interface.
Finally, it fixes a number of bugs, including some missing locks and race
conditions that could trigger a kernel panic if the USB configuration
interface was claimed or released from userspace.
For ease of reviewing, the series has been split into three patches, though
the bulk of the code is still in the first patch.
Vicki Pfau (3):
HID: nintendo: Add preliminary Switch 2 controller driver
HID: nintendo: Add rumble support for Switch 2 controllers
HID: nintendo: Add unified report format support
MAINTAINERS | 1 +
drivers/hid/Kconfig | 19 +-
drivers/hid/hid-ids.h | 4 +
drivers/hid/hid-nintendo.c | 1507 ++++++++++++++++-
drivers/hid/hid-nintendo.h | 72 +
drivers/input/joystick/Kconfig | 11 +
drivers/input/joystick/Makefile | 1 +
drivers/input/joystick/nintendo-switch2-usb.c | 352 ++++
8 files changed, 1953 insertions(+), 14 deletions(-)
create mode 100644 drivers/hid/hid-nintendo.h
create mode 100644 drivers/input/joystick/nintendo-switch2-usb.c
--
2.53.0
^ permalink raw reply
* [PATCH v2 3/3] HID: nintendo: Add unified report format support
From: Vicki Pfau @ 2026-03-18 3:08 UTC (permalink / raw)
To: Dmitry Torokhov, Jiri Kosina, Benjamin Tissoires, linux-input; +Cc: Vicki Pfau
In-Reply-To: <20260318030850.289712-1-vi@endrift.com>
This adds support for the "unified" report format that all controllers also
support, which has overlapping fields for like buttons and axes between
them.
Signed-off-by: Vicki Pfau <vi@endrift.com>
---
drivers/hid/hid-nintendo.c | 148 +++++++++++++++++++++++++++++++++++--
1 file changed, 143 insertions(+), 5 deletions(-)
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 73d732ceb7116..cd32119247400 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -2828,6 +2828,36 @@ static int joycon_suspend(struct hid_device *hdev, pm_message_t message)
#define NS2_BTN3_SR BIT(6)
#define NS2_BTN3_SL BIT(7)
+#define NS2_BTN_U1_Y BIT(0)
+#define NS2_BTN_U1_X BIT(1)
+#define NS2_BTN_U1_B BIT(2)
+#define NS2_BTN_U1_A BIT(3)
+#define NS2_BTN_U1_SR BIT(4)
+#define NS2_BTN_U1_SL BIT(5)
+#define NS2_BTN_U1_R BIT(6)
+#define NS2_BTN_U1_ZR BIT(7)
+
+#define NS2_BTN_U2_MINUS BIT(0)
+#define NS2_BTN_U2_PLUS BIT(1)
+#define NS2_BTN_U2_RS BIT(2)
+#define NS2_BTN_U2_LS BIT(3)
+#define NS2_BTN_U2_HOME BIT(4)
+#define NS2_BTN_U2_CAPTURE BIT(5)
+#define NS2_BTN_U2_C BIT(6)
+
+#define NS2_BTN_U3_DOWN BIT(0)
+#define NS2_BTN_U3_UP BIT(1)
+#define NS2_BTN_U3_RIGHT BIT(2)
+#define NS2_BTN_U3_LEFT BIT(3)
+#define NS2_BTN_U3_SR BIT(4)
+#define NS2_BTN_U3_SL BIT(5)
+#define NS2_BTN_U3_L BIT(6)
+#define NS2_BTN_U3_ZL BIT(7)
+
+#define NS2_BTN_U4_GR BIT(0)
+#define NS2_BTN_U4_GL BIT(1)
+#define NS2_BTN_U4_HEADSET BIT(5)
+
#define NS2_BTN_JCR_HOME BIT(0)
#define NS2_BTN_JCR_GR BIT(2)
#define NS2_BTN_JCR_C NS2_BTN3_C
@@ -3073,6 +3103,22 @@ static const struct switch2_ctlr_button_mapping ns2_left_joycon_button_mappings[
{ /* sentinel */ },
};
+static const struct switch2_ctlr_button_mapping ns2_left_joycon_button_unified_mappings[] = {
+ { BTN_DPAD_LEFT, 2, NS2_BTN_U3_LEFT, },
+ { BTN_DPAD_UP, 2, NS2_BTN_U3_UP, },
+ { BTN_DPAD_DOWN, 2, NS2_BTN_U3_DOWN, },
+ { BTN_DPAD_RIGHT, 2, NS2_BTN_U3_RIGHT, },
+ { BTN_TL, 2, NS2_BTN_U3_L, },
+ { BTN_TL2, 2, NS2_BTN_U3_ZL, },
+ { BTN_SELECT, 1, NS2_BTN_U2_MINUS, },
+ { BTN_THUMBL, 1, NS2_BTN_U2_LS, },
+ { KEY_RECORD, 1, NS2_BTN_U2_CAPTURE, },
+ { BTN_GRIPR, 2, NS2_BTN_U3_SL, },
+ { BTN_GRIPR2, 2, NS2_BTN_U3_SR, },
+ { BTN_GRIPL, 3, NS2_BTN_U4_GL, },
+ { /* sentinel */ },
+};
+
static const struct switch2_ctlr_button_mapping ns2_right_joycon_button_mappings[] = {
{ BTN_SOUTH, 0, NS2_BTNR_A, },
{ BTN_EAST, 0, NS2_BTNR_B, },
@@ -3090,6 +3136,23 @@ static const struct switch2_ctlr_button_mapping ns2_right_joycon_button_mappings
{ /* sentinel */ },
};
+static const struct switch2_ctlr_button_mapping ns2_right_joycon_button_unified_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTN_U1_A, },
+ { BTN_EAST, 0, NS2_BTN_U1_B, },
+ { BTN_NORTH, 0, NS2_BTN_U1_X, },
+ { BTN_WEST, 0, NS2_BTN_U1_Y, },
+ { BTN_TR, 0, NS2_BTN_U1_R, },
+ { BTN_TR2, 0, NS2_BTN_U1_ZR },
+ { BTN_START, 1, NS2_BTN_U2_PLUS, },
+ { BTN_THUMBR, 1, NS2_BTN_U2_RS, },
+ { BTN_C, 1, NS2_BTN_U2_C, },
+ { BTN_MODE, 1, NS2_BTN_U2_HOME, },
+ { BTN_GRIPL2, 0, NS2_BTN_U1_SL, },
+ { BTN_GRIPL, 0, NS2_BTN_U1_SR, },
+ { BTN_GRIPR, 3, NS2_BTN_U4_GR, },
+ { /* sentinel */ },
+};
+
static const struct switch2_ctlr_button_mapping ns2_procon_mappings[] = {
{ BTN_SOUTH, 0, NS2_BTNR_A, },
{ BTN_EAST, 0, NS2_BTNR_B, },
@@ -3111,6 +3174,27 @@ static const struct switch2_ctlr_button_mapping ns2_procon_mappings[] = {
{ /* sentinel */ },
};
+static const struct switch2_ctlr_button_mapping ns2_procon_unified_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTN_U1_A, },
+ { BTN_EAST, 0, NS2_BTN_U1_B, },
+ { BTN_NORTH, 0, NS2_BTN_U1_X, },
+ { BTN_WEST, 0, NS2_BTN_U1_Y, },
+ { BTN_TL, 2, NS2_BTN_U3_L, },
+ { BTN_TR, 0, NS2_BTN_U1_R, },
+ { BTN_TL2, 2, NS2_BTN_U3_ZL, },
+ { BTN_TR2, 0, NS2_BTN_U1_ZR, },
+ { BTN_SELECT, 1, NS2_BTN_U2_MINUS, },
+ { BTN_START, 1, NS2_BTN_U2_PLUS, },
+ { BTN_THUMBL, 1, NS2_BTN_U2_LS, },
+ { BTN_THUMBR, 1, NS2_BTN_U2_RS, },
+ { BTN_MODE, 1, NS2_BTN_U2_HOME },
+ { KEY_RECORD, 1, NS2_BTN_U2_CAPTURE },
+ { BTN_GRIPR, 3, NS2_BTN_U4_GR },
+ { BTN_GRIPL, 3, NS2_BTN_U4_GL },
+ { BTN_C, 1, NS2_BTN_U2_C },
+ { /* sentinel */ },
+};
+
static const struct switch2_ctlr_button_mapping ns2_gccon_mappings[] = {
{ BTN_SOUTH, 0, NS2_BTNR_A, },
{ BTN_EAST, 0, NS2_BTNR_B, },
@@ -3128,6 +3212,23 @@ static const struct switch2_ctlr_button_mapping ns2_gccon_mappings[] = {
{ /* sentinel */ },
};
+static const struct switch2_ctlr_button_mapping ns2_gccon_unified_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTN_U1_A, },
+ { BTN_EAST, 0, NS2_BTN_U1_B, },
+ { BTN_NORTH, 0, NS2_BTN_U1_X, },
+ { BTN_WEST, 0, NS2_BTN_U1_Y, },
+ { BTN_TL2, 2, NS2_BTN_U3_L, },
+ { BTN_TR2, 0, NS2_BTN_U1_R, },
+ { BTN_TL, 2, NS2_BTN_U3_ZL },
+ { BTN_TR, 0, NS2_BTN_U1_ZR },
+ { BTN_SELECT, 1, NS2_BTN_U2_MINUS, },
+ { BTN_START, 1, NS2_BTN_U2_PLUS, },
+ { BTN_MODE, 1, NS2_BTN_U2_HOME },
+ { KEY_RECORD, 1, NS2_BTN_U2_CAPTURE },
+ { BTN_C, 1, NS2_BTN_U2_C },
+ { /* sentinel */ },
+};
+
static const uint8_t switch2_init_cmd_data[] = {
/*
* The last 6 bytes of this packet are the MAC address of
@@ -3691,11 +3792,48 @@ static int switch2_event(struct hid_device *hdev, struct hid_report *report, uin
switch (report->id) {
case NS2_REPORT_UNIFIED:
- /*
- * TODO
- * This won't be sent unless the report type gets changed via command
- * 03-0A, but we should support it at some point regardless.
- */
+ switch (ns2->ctlr_type) {
+ case NS2_CTLR_TYPE_JCL:
+ switch2_report_stick(input, &ns2->stick_calib[0],
+ ABS_X, false, ABS_Y, true, &raw_data[11]);
+ switch2_report_buttons(input, &raw_data[5],
+ ns2_left_joycon_button_unified_mappings);
+ break;
+ case NS2_CTLR_TYPE_JCR:
+ switch2_report_stick(input, &ns2->stick_calib[0],
+ ABS_X, false, ABS_Y, true, &raw_data[14]);
+ switch2_report_buttons(input, &raw_data[5],
+ ns2_right_joycon_button_unified_mappings);
+ break;
+ case NS2_CTLR_TYPE_GC:
+ input_report_abs(input, ABS_HAT0X,
+ !!(raw_data[7] & NS2_BTN_U3_RIGHT) -
+ !!(raw_data[7] & NS2_BTN_U3_LEFT));
+ input_report_abs(input, ABS_HAT0Y,
+ !!(raw_data[7] & NS2_BTN_U3_DOWN) -
+ !!(raw_data[7] & NS2_BTN_U3_UP));
+ switch2_report_buttons(input, &raw_data[5], ns2_gccon_unified_mappings);
+ switch2_report_stick(input, &ns2->stick_calib[0],
+ ABS_X, false, ABS_Y, true, &raw_data[11]);
+ switch2_report_stick(input, &ns2->stick_calib[1],
+ ABS_RX, false, ABS_RY, true, &raw_data[14]);
+ switch2_report_trigger(input, ns2->lt_zero, ABS_Z, raw_data[0x3d]);
+ switch2_report_trigger(input, ns2->rt_zero, ABS_RZ, raw_data[0x3e]);
+ break;
+ case NS2_CTLR_TYPE_PRO:
+ input_report_abs(input, ABS_HAT0X,
+ !!(raw_data[7] & NS2_BTN_U3_RIGHT) -
+ !!(raw_data[7] & NS2_BTN_U3_LEFT));
+ input_report_abs(input, ABS_HAT0Y,
+ !!(raw_data[7] & NS2_BTN_U3_DOWN) -
+ !!(raw_data[7] & NS2_BTN_U3_UP));
+ switch2_report_buttons(input, &raw_data[5], ns2_procon_unified_mappings);
+ switch2_report_stick(input, &ns2->stick_calib[0],
+ ABS_X, false, ABS_Y, true, &raw_data[11]);
+ switch2_report_stick(input, &ns2->stick_calib[1],
+ ABS_RX, false, ABS_RY, true, &raw_data[14]);
+ break;
+ }
break;
case NS2_REPORT_JCL:
switch2_report_stick(input, &ns2->stick_calib[0], ABS_X, false,
--
2.53.0
^ permalink raw reply related
* [PATCH v2 2/3] HID: nintendo: Add rumble support for Switch 2 controllers
From: Vicki Pfau @ 2026-03-18 3:08 UTC (permalink / raw)
To: Dmitry Torokhov, Jiri Kosina, Benjamin Tissoires, linux-input; +Cc: Vicki Pfau
In-Reply-To: <20260318030850.289712-1-vi@endrift.com>
This adds rumble support for both the "HD Rumble" linear resonant actuator
type as used in the Joy-Cons and Pro Controller, as well as the eccentric
rotating mass type used in the GameCube controller. Note that since there's
currently no API for exposing full control of LRAs with evdev, it only
simulates a basic rumble for now.
Signed-off-by: Vicki Pfau <vi@endrift.com>
---
drivers/hid/Kconfig | 8 +-
drivers/hid/hid-nintendo.c | 179 ++++++++++++++++++++++++++++++++++++-
2 files changed, 181 insertions(+), 6 deletions(-)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 1a293a6c02c26..d8ce7451d8578 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -842,10 +842,10 @@ config NINTENDO_FF
depends on HID_NINTENDO
select INPUT_FF_MEMLESS
help
- Say Y here if you have a Nintendo Switch controller and want to enable
- force feedback support for it. This works for both joy-cons, the pro
- controller, and the NSO N64 controller. For the pro controller, both
- rumble motors can be controlled individually.
+ Say Y here if you have a Nintendo Switch or Switch 2 controller and want
+ to enable force feedback support for it. This works for Joy-Cons, the Pro
+ Controllers, and the NSO N64 and GameCube controller. For the Pro
+ Controller, both rumble motors can be controlled individually.
config HID_NTI
tristate "NTI keyboard adapters"
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 4ab8d4e7558a1..73d732ceb7116 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -2976,6 +2976,18 @@ struct switch2_stick_calibration {
struct switch2_axis_calibration y;
};
+struct switch2_hd_rumble {
+ uint16_t hi_freq : 10;
+ uint16_t hi_amp : 10;
+ uint16_t lo_freq : 10;
+ uint16_t lo_amp : 10;
+} __packed;
+
+struct switch2_erm_rumble {
+ uint16_t error;
+ uint16_t amplitude;
+};
+
struct switch2_controller {
struct hid_device *hdev;
struct switch2_cfg_intf *cfg;
@@ -2997,8 +3009,45 @@ struct switch2_controller {
uint32_t player_id;
struct led_classdev leds[4];
+
+#if IS_ENABLED(CONFIG_NINTENDO_FF)
+ spinlock_t rumble_lock;
+ uint8_t rumble_seq;
+ union {
+ struct switch2_hd_rumble hd;
+ struct switch2_erm_rumble sd;
+ } rumble;
+ unsigned long last_rumble_work;
+ struct delayed_work rumble_work;
+ uint8_t rumble_buffer[64];
+#endif
+};
+
+enum gc_rumble {
+ GC_RUMBLE_OFF = 0,
+ GC_RUMBLE_ON = 1,
+ GC_RUMBLE_STOP = 2,
};
+/*
+ * The highest rumble level for "HD Rumble" is strong enough to potentially damage the controller,
+ * and also leaves your hands feeling like melted jelly, so we set a semi-abitrary scaling factor
+ * to artificially limit the maximum for safety and comfort. It is currently unknown if the Switch
+ * 2 itself does something similar, but it's quite likely.
+ *
+ * This value must be between 0 and 1024, otherwise the math below will overflow.
+ */
+#define RUMBLE_MAX 450u
+
+/*
+ * Semi-arbitrary values used to simulate the "rumble" sensation of an eccentric rotating
+ * mass type haptic motor on the Switch 2 controllers' linear resonant actuator type haptics.
+ *
+ * The units used are unknown, but the values must be between 0 and 1023.
+ */
+#define RUMBLE_HI_FREQ 0x187
+#define RUMBLE_LO_FREQ 0x112
+
static DEFINE_MUTEX(switch2_controllers_lock);
static LIST_HEAD(switch2_controllers);
@@ -3088,9 +3137,12 @@ static const uint8_t switch2_init_cmd_data[] = {
};
static const uint8_t switch2_one_data[] = { 0x01, 0x00, 0x00, 0x00 };
+#if IS_ENABLED(CONFIG_NINTENDO_FF)
+static const uint8_t switch2_zero_data[] = { 0x00, 0x00, 0x00, 0x00 };
+#endif
static const uint8_t switch2_feature_mask[] = {
- NS2_FEATURE_BUTTONS | NS2_FEATURE_ANALOG | NS2_FEATURE_IMU,
+ NS2_FEATURE_BUTTONS | NS2_FEATURE_ANALOG | NS2_FEATURE_IMU | NS2_FEATURE_RUMBLE,
0x00, 0x00, 0x00
};
@@ -3107,6 +3159,107 @@ static inline bool switch2_ctlr_is_joycon(enum switch2_ctlr_type type)
return type == NS2_CTLR_TYPE_JCL || type == NS2_CTLR_TYPE_JCR;
}
+#if IS_ENABLED(CONFIG_NINTENDO_FF)
+static void switch2_encode_rumble(struct switch2_hd_rumble *rumble, uint8_t buffer[5])
+{
+ buffer[0] = rumble->hi_freq;
+ buffer[1] = (rumble->hi_freq >> 8) | (rumble->hi_amp << 2);
+ buffer[2] = (rumble->hi_amp >> 6) | (rumble->lo_freq << 4);
+ buffer[3] = (rumble->lo_freq >> 4) | (rumble->lo_amp << 6);
+ buffer[4] = rumble->lo_amp >> 2;
+}
+
+static int switch2_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
+{
+ struct switch2_controller *ns2 = input_get_drvdata(dev);
+
+ if (effect->type != FF_RUMBLE)
+ return 0;
+
+ guard(spinlock_irqsave)(&ns2->rumble_lock);
+ if (ns2->ctlr_type == NS2_CTLR_TYPE_GC) {
+ ns2->rumble.sd.amplitude = max(effect->u.rumble.strong_magnitude,
+ effect->u.rumble.weak_magnitude >> 1);
+ } else {
+ ns2->rumble.hd.hi_amp = effect->u.rumble.weak_magnitude * RUMBLE_MAX >> 16;
+ ns2->rumble.hd.lo_amp = effect->u.rumble.strong_magnitude * RUMBLE_MAX >> 16;
+ }
+
+ if (ns2->hdev)
+ schedule_delayed_work(&ns2->rumble_work, 0);
+
+ return 0;
+}
+
+static void switch2_rumble_work(struct work_struct *work)
+{
+ struct switch2_controller *ns2 = container_of(to_delayed_work(work),
+ struct switch2_controller, rumble_work);
+ unsigned long current_ms = jiffies_to_msecs(get_jiffies_64());
+ unsigned long flags;
+ bool active;
+ int ret;
+
+ spin_lock_irqsave(&ns2->rumble_lock, flags);
+ ns2->rumble_buffer[0x1] = 0x50 | ns2->rumble_seq;
+ if (ns2->ctlr_type == NS2_CTLR_TYPE_GC) {
+ ns2->rumble_buffer[0] = 3;
+ if (ns2->rumble.sd.amplitude == 0) {
+ ns2->rumble_buffer[2] = GC_RUMBLE_STOP;
+ ns2->rumble.sd.error = 0;
+ active = false;
+ } else {
+ if (ns2->rumble.sd.error < ns2->rumble.sd.amplitude) {
+ ns2->rumble_buffer[2] = GC_RUMBLE_ON;
+ ns2->rumble.sd.error += U16_MAX - ns2->rumble.sd.amplitude;
+ } else {
+ ns2->rumble_buffer[2] = GC_RUMBLE_OFF;
+ ns2->rumble.sd.error -= ns2->rumble.sd.amplitude;
+ }
+ active = true;
+ }
+ } else {
+ ns2->rumble_buffer[0] = 1;
+ switch2_encode_rumble(&ns2->rumble.hd, &ns2->rumble_buffer[0x2]);
+ active = ns2->rumble.hd.hi_amp || ns2->rumble.hd.lo_amp;
+ if (ns2->ctlr_type == NS2_CTLR_TYPE_PRO) {
+ /*
+ * The Pro Controller contains separate LRAs on each
+ * side that can be controlled individually.
+ */
+ ns2->rumble_buffer[0] = 2;
+ ns2->rumble_buffer[0x11] = 0x50 | ns2->rumble_seq;
+ switch2_encode_rumble(&ns2->rumble.hd, &ns2->rumble_buffer[0x12]);
+ }
+ }
+ ns2->rumble_seq = (ns2->rumble_seq + 1) & 0xF;
+
+ if (active) {
+ unsigned long interval = msecs_to_jiffies(4);
+
+ if (!ns2->last_rumble_work)
+ ns2->last_rumble_work = current_ms;
+ else
+ ns2->last_rumble_work += interval;
+ schedule_delayed_work(&ns2->rumble_work,
+ ns2->last_rumble_work + interval - current_ms);
+ } else {
+ ns2->last_rumble_work = 0;
+ }
+ spin_unlock_irqrestore(&ns2->rumble_lock, flags);
+
+ if (!ns2->hdev) {
+ cancel_delayed_work(&ns2->rumble_work);
+ ret = -ENODEV;
+ } else {
+ ret = hid_hw_output_report(ns2->hdev, ns2->rumble_buffer, 64);
+ }
+
+ if (ret < 0)
+ hid_dbg(ns2->hdev, "Failed to send output report ret=%d\n", ret);
+}
+#endif
+
static int switch2_set_leds(struct switch2_controller *ns2)
{
int i;
@@ -3230,6 +3383,15 @@ static int switch2_init_input(struct switch2_controller *ns2)
return -EINVAL;
}
+#if IS_ENABLED(CONFIG_NINTENDO_FF)
+ input_set_capability(input, EV_FF, FF_RUMBLE);
+ ret = input_ff_create_memless(input, NULL, switch2_play_effect);
+ if (ret) {
+ input_free_device(input);
+ return ret;
+ }
+#endif
+
hid_info(ns2->hdev, "Firmware version %u.%u.%u (type %i)\n", ns2->version.major,
ns2->version.minor, ns2->version.patch, ns2->version.ctlr_type);
if (ns2->version.dsp_type >= 0)
@@ -3309,6 +3471,10 @@ static void switch2_controller_put(struct switch2_controller *ns2)
if (input)
input_unregister_device(input);
+#if IS_ENABLED(CONFIG_NINTENDO_FF)
+ cancel_delayed_work_sync(&ns2->rumble_work);
+#endif
+
if (do_free) {
list_del_init(&ns2->entry);
mutex_destroy(&ns2->lock);
@@ -3668,7 +3834,8 @@ static int switch2_init_controller(struct switch2_controller *ns2)
return ns2->cfg->send_command(NS2_CMD_FEATSEL, NS2_SUBCMD_FEATSEL_SET_MASK,
switch2_feature_mask, sizeof(switch2_feature_mask), ns2->cfg);
case NS2_INIT_ENABLE_FEATURES:
- return switch2_features_enable(ns2, NS2_FEATURE_BUTTONS | NS2_FEATURE_ANALOG);
+ return switch2_features_enable(ns2, NS2_FEATURE_BUTTONS |
+ NS2_FEATURE_ANALOG | NS2_FEATURE_RUMBLE);
case NS2_INIT_GRIP_BUTTONS:
if (!switch2_ctlr_is_joycon(ns2->ctlr_type)) {
switch2_init_step_done(ns2, NS2_INIT_GRIP_BUTTONS);
@@ -3882,6 +4049,14 @@ static int switch2_probe(struct hid_device *hdev, const struct hid_device_id *id
switch2_leds_create(ns2);
+#if IS_ENABLED(CONFIG_NINTENDO_FF)
+ if (ns2->ctlr_type != NS2_CTLR_TYPE_GC) {
+ ns2->rumble.hd.hi_freq = RUMBLE_HI_FREQ;
+ ns2->rumble.hd.lo_freq = RUMBLE_LO_FREQ;
+ }
+ spin_lock_init(&ns2->rumble_lock);
+ INIT_DELAYED_WORK(&ns2->rumble_work, switch2_rumble_work);
+#endif
hid_set_drvdata(hdev, ns2);
if (ns2->cfg)
--
2.53.0
^ permalink raw reply related
* [PATCH v2 1/3] HID: nintendo: Add preliminary Switch 2 controller driver
From: Vicki Pfau @ 2026-03-18 3:08 UTC (permalink / raw)
To: Dmitry Torokhov, Jiri Kosina, Benjamin Tissoires, linux-input; +Cc: Vicki Pfau
In-Reply-To: <20260318030850.289712-1-vi@endrift.com>
This adds a new driver for the Switch 2 controllers. The Switch 2 uses an
unusual split-interface design such that input and rumble occur on the main
HID interface, but all other communication occurs over a "configuration"
interface. This is the case on both USB and Bluetooth, so this new driver
uses a split-driver design with the HID interface being the "main" driver
and the configuration interface is a secondary driver that looks up to the
HID interface, sharing resources on a common struct.
Due to using a non-standard pairing interface as well as Bluetooth
communications being extremely limited in the kernel, a custom interface
between userspace and the kernel will need to be design, along with bringup
in BlueZ. That is beyond the scope of this initial patch, which only
contains the generic HID and USB configuration interface drivers.
This initial work supports general input for the Joy-Con 2, Pro Controller
2, and GameCube NSO controllers. IMU, rumble and battery support is not yet
present.
Signed-off-by: Vicki Pfau <vi@endrift.com>
---
MAINTAINERS | 1 +
drivers/hid/Kconfig | 11 +-
drivers/hid/hid-ids.h | 4 +
drivers/hid/hid-nintendo.c | 1194 ++++++++++++++++-
drivers/hid/hid-nintendo.h | 72 +
drivers/input/joystick/Kconfig | 11 +
drivers/input/joystick/Makefile | 1 +
drivers/input/joystick/nintendo-switch2-usb.c | 353 +++++
8 files changed, 1637 insertions(+), 10 deletions(-)
create mode 100644 drivers/hid/hid-nintendo.h
create mode 100644 drivers/input/joystick/nintendo-switch2-usb.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 7b277d5bf3d12..4d1a28df5fd24 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18743,6 +18743,7 @@ F: drivers/scsi/nsp32*
NINTENDO HID DRIVER
M: Daniel J. Ogorchock <djogorchock@gmail.com>
+M: Vicki Pfau <vi@endrift.com>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/hid/hid-nintendo*
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index c1d9f7c6a5f23..1a293a6c02c26 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -826,10 +826,13 @@ config HID_NINTENDO
depends on LEDS_CLASS
select POWER_SUPPLY
help
- Adds support for the Nintendo Switch Joy-Cons, NSO, Pro Controller.
- All controllers support bluetooth, and the Pro Controller also supports
- its USB mode. This also includes support for the Nintendo Switch Online
- Controllers which include the NES, Genesis, SNES, and N64 controllers.
+ Adds support for the Nintendo Switch Joy-Cons, NSO, Pro Controller, as
+ well as Nintendo Switch 2 Joy-Cons, Pro Controller, and NSO GameCube
+ controllers. All Switch controllers support bluetooth, and the Pro
+ Controller also supports its USB mode. This also includes support for
+ the Nintendo Switch Online Controllers which include the NES, Genesis,
+ SNES, and N64 controllers. Switch 2 controllers currently only support
+ USB mode.
To compile this driver as a module, choose M here: the
module will be called hid-nintendo.
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4ab7640b119ac..a794dad7980f3 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1073,6 +1073,10 @@
#define USB_DEVICE_ID_NINTENDO_SNESCON 0x2017
#define USB_DEVICE_ID_NINTENDO_GENCON 0x201e
#define USB_DEVICE_ID_NINTENDO_N64CON 0x2019
+#define USB_DEVICE_ID_NINTENDO_NS2_JOYCONR 0x2066
+#define USB_DEVICE_ID_NINTENDO_NS2_JOYCONL 0x2067
+#define USB_DEVICE_ID_NINTENDO_NS2_PROCON 0x2069
+#define USB_DEVICE_ID_NINTENDO_NS2_GCCON 0x2073
#define USB_VENDOR_ID_NOVATEK 0x0603
#define USB_DEVICE_ID_NOVATEK_PCT 0x0600
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 29008c2cc5304..4ab8d4e7558a1 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -1,11 +1,13 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * HID driver for Nintendo Switch Joy-Cons and Pro Controllers
+ * HID driver for Nintendo Switch Joy-Cons and Pro Controllers, as well as
+ * Nintendo Switch 2 Joy-Cons, Pro Controller, and GameCube Controller
*
* Copyright (c) 2019-2021 Daniel J. Ogorchock <djogorchock@gmail.com>
* Portions Copyright (c) 2020 Nadia Holmquist Pedersen <nadia@nhp.sh>
* Copyright (c) 2022 Emily Strickland <linux@emily.st>
* Copyright (c) 2023 Ryan McClelland <rymcclel@gmail.com>
+ * Copyright (c) 2026 Valve Software
*
* The following resources/projects were referenced for this driver:
* https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
@@ -13,6 +15,8 @@
* https://github.com/FrotBot/SwitchProConLinuxUSB
* https://github.com/MTCKC/ProconXInput
* https://github.com/Davidobot/BetterJoyForCemu
+ * https://gist.github.com/shinyquagsire23/66f006b46c56216acbaac6c1e2279b64
+ * https://github.com/ndeadly/switch2_controller_research
* hid-wiimote kernel hid driver
* hid-logitech-hidpp driver
* hid-sony driver
@@ -29,6 +33,7 @@
*/
#include "hid-ids.h"
+#include "hid-nintendo.h"
#include <linux/unaligned.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -41,6 +46,8 @@
#include <linux/module.h>
#include <linux/power_supply.h>
#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
/*
* Reference the url below for the following HID report defines:
@@ -2614,7 +2621,7 @@ static int joycon_ctlr_handle_event(struct joycon_ctlr *ctlr, u8 *data,
return ret;
}
-static int nintendo_hid_event(struct hid_device *hdev,
+static int joycon_event(struct hid_device *hdev,
struct hid_report *report, u8 *raw_data, int size)
{
struct joycon_ctlr *ctlr = hid_get_drvdata(hdev);
@@ -2625,7 +2632,7 @@ static int nintendo_hid_event(struct hid_device *hdev,
return joycon_ctlr_handle_event(ctlr, raw_data, size);
}
-static int nintendo_hid_probe(struct hid_device *hdev,
+static int joycon_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
int ret;
@@ -2729,7 +2736,7 @@ static int nintendo_hid_probe(struct hid_device *hdev,
return ret;
}
-static void nintendo_hid_remove(struct hid_device *hdev)
+static void joycon_remove(struct hid_device *hdev)
{
struct joycon_ctlr *ctlr = hid_get_drvdata(hdev);
unsigned long flags;
@@ -2748,7 +2755,9 @@ static void nintendo_hid_remove(struct hid_device *hdev)
hid_hw_stop(hdev);
}
-static int nintendo_hid_resume(struct hid_device *hdev)
+#ifdef CONFIG_PM
+
+static int joycon_resume(struct hid_device *hdev)
{
struct joycon_ctlr *ctlr = hid_get_drvdata(hdev);
int ret;
@@ -2771,7 +2780,7 @@ static int nintendo_hid_resume(struct hid_device *hdev)
return ret;
}
-static int nintendo_hid_suspend(struct hid_device *hdev, pm_message_t message)
+static int joycon_suspend(struct hid_device *hdev, pm_message_t message)
{
struct joycon_ctlr *ctlr = hid_get_drvdata(hdev);
@@ -2790,7 +2799,1120 @@ static int nintendo_hid_suspend(struct hid_device *hdev, pm_message_t message)
return 0;
}
+#endif
+
+/*
+ * =============================================================================
+ * Switch 2 support
+ * =============================================================================
+ */
+#define NS2_BTNR_B BIT(0)
+#define NS2_BTNR_A BIT(1)
+#define NS2_BTNR_Y BIT(2)
+#define NS2_BTNR_X BIT(3)
+#define NS2_BTNR_R BIT(4)
+#define NS2_BTNR_ZR BIT(5)
+#define NS2_BTNR_PLUS BIT(6)
+#define NS2_BTNR_RS BIT(7)
+
+#define NS2_BTNL_DOWN BIT(0)
+#define NS2_BTNL_RIGHT BIT(1)
+#define NS2_BTNL_LEFT BIT(2)
+#define NS2_BTNL_UP BIT(3)
+#define NS2_BTNL_L BIT(4)
+#define NS2_BTNL_ZL BIT(5)
+#define NS2_BTNL_MINUS BIT(6)
+#define NS2_BTNL_LS BIT(7)
+
+#define NS2_BTN3_C BIT(4)
+#define NS2_BTN3_SR BIT(6)
+#define NS2_BTN3_SL BIT(7)
+
+#define NS2_BTN_JCR_HOME BIT(0)
+#define NS2_BTN_JCR_GR BIT(2)
+#define NS2_BTN_JCR_C NS2_BTN3_C
+#define NS2_BTN_JCR_SR NS2_BTN3_SR
+#define NS2_BTN_JCR_SL NS2_BTN3_SL
+
+#define NS2_BTN_JCL_CAPTURE BIT(0)
+#define NS2_BTN_JCL_GL BIT(2)
+#define NS2_BTN_JCL_SR NS2_BTN3_SR
+#define NS2_BTN_JCL_SL NS2_BTN3_SL
+
+#define NS2_BTN_PRO_HOME BIT(0)
+#define NS2_BTN_PRO_CAPTURE BIT(1)
+#define NS2_BTN_PRO_GR BIT(2)
+#define NS2_BTN_PRO_GL BIT(3)
+#define NS2_BTN_PRO_C NS2_BTN3_C
+
+#define NS2_BTN_GC_HOME BIT(0)
+#define NS2_BTN_GC_CAPTURE BIT(1)
+#define NS2_BTN_GC_C NS2_BTN3_C
+
+#define NS2_TRIGGER_RANGE 4095
+#define NS2_AXIS_MIN -32768
+#define NS2_AXIS_MAX 32767
+
+#define NS2_MAX_PLAYER_ID 8
+
+#define NS2_MAX_INIT_RETRIES 4
+
+#define NS2_FLASH_ADDR_SERIAL 0x13002
+#define NS2_FLASH_ADDR_FACTORY_PRIMARY_CALIB 0x130a8
+#define NS2_FLASH_ADDR_FACTORY_SECONDARY_CALIB 0x130e8
+#define NS2_FLASH_ADDR_FACTORY_TRIGGER_CALIB 0x13140
+#define NS2_FLASH_ADDR_USER_PRIMARY_CALIB 0x1fc040
+#define NS2_FLASH_ADDR_USER_SECONDARY_CALIB 0x1fc080
+
+#define NS2_FLASH_SIZE_SERIAL 0x10
+#define NS2_FLASH_SIZE_FACTORY_AXIS_CALIB 9
+#define NS2_FLASH_SIZE_FACTORY_TRIGGER_CALIB 2
+#define NS2_FLASH_SIZE_USER_AXIS_CALIB 11
+
+#define NS2_USER_CALIB_MAGIC 0xa1b2
+
+#define NS2_FEATURE_BUTTONS BIT(0)
+#define NS2_FEATURE_ANALOG BIT(1)
+#define NS2_FEATURE_IMU BIT(2)
+#define NS2_FEATURE_MOUSE BIT(4)
+#define NS2_FEATURE_RUMBLE BIT(5)
+#define NS2_FEATURE_MAGNETO BIT(7)
+
+enum switch2_subcmd_flash {
+ NS2_SUBCMD_FLASH_READ_BLOCK = 0x01,
+ NS2_SUBCMD_FLASH_WRITE_BLOCK = 0x02,
+ NS2_SUBCMD_FLASH_ERASE_BLOCK = 0x03,
+ NS2_SUBCMD_FLASH_READ = 0x04,
+ NS2_SUBCMD_FLASH_WRITE = 0x05,
+};
+
+enum switch2_subcmd_init {
+ NS2_SUBCMD_INIT_SELECT_REPORT = 0xa,
+ NS2_SUBCMD_INIT_USB = 0xd,
+};
+
+enum switch2_subcmd_feature_select {
+ NS2_SUBCMD_FEATSEL_GET_INFO = 0x1,
+ NS2_SUBCMD_FEATSEL_SET_MASK = 0x2,
+ NS2_SUBCMD_FEATSEL_CLEAR_MASK = 0x3,
+ NS2_SUBCMD_FEATSEL_ENABLE = 0x4,
+ NS2_SUBCMD_FEATSEL_DISABLE = 0x5,
+};
+
+enum switch2_subcmd_grip {
+ NS2_SUBCMD_GRIP_GET_INFO = 0x1,
+ NS2_SUBCMD_GRIP_ENABLE_BUTTONS = 0x2,
+ NS2_SUBCMD_GRIP_GET_INFO_EXT = 0x3,
+};
+
+enum switch2_subcmd_led {
+ NS2_SUBCMD_LED_P1 = 0x1,
+ NS2_SUBCMD_LED_P2 = 0x2,
+ NS2_SUBCMD_LED_P3 = 0x3,
+ NS2_SUBCMD_LED_P4 = 0x4,
+ NS2_SUBCMD_LED_ALL_ON = 0x5,
+ NS2_SUBCMD_LED_ALL_OFF = 0x6,
+ NS2_SUBCMD_LED_PATTERN = 0x7,
+ NS2_SUBCMD_LED_BLINK = 0x8,
+};
+
+enum switch2_subcmd_fw_info {
+ NS2_SUBCMD_FW_INFO_GET = 0x1,
+};
+
+enum switch2_ctlr_type {
+ NS2_CTLR_TYPE_JCL = 0x00,
+ NS2_CTLR_TYPE_JCR = 0x01,
+ NS2_CTLR_TYPE_PRO = 0x02,
+ NS2_CTLR_TYPE_GC = 0x03,
+};
+
+enum switch2_report_id {
+ NS2_REPORT_UNIFIED = 0x05,
+ NS2_REPORT_JCL = 0x07,
+ NS2_REPORT_JCR = 0x08,
+ NS2_REPORT_PRO = 0x09,
+ NS2_REPORT_GC = 0x0a,
+};
+
+enum switch2_init_step {
+ NS2_INIT_READ_SERIAL,
+ NS2_INIT_GET_FIRMWARE_INFO,
+ NS2_INIT_READ_FACTORY_PRIMARY_CALIB,
+ NS2_INIT_READ_FACTORY_SECONDARY_CALIB,
+ NS2_INIT_READ_FACTORY_TRIGGER_CALIB,
+ NS2_INIT_READ_USER_PRIMARY_CALIB,
+ NS2_INIT_READ_USER_SECONDARY_CALIB,
+ NS2_INIT_SET_FEATURE_MASK,
+ NS2_INIT_ENABLE_FEATURES,
+ NS2_INIT_GRIP_BUTTONS,
+ NS2_INIT_REPORT_FORMAT,
+ NS2_INIT_SET_PLAYER_LEDS,
+ NS2_INIT_INPUT,
+ NS2_INIT_FINISH,
+ NS2_INIT_DONE,
+};
+
+struct switch2_version_info {
+ uint8_t major;
+ uint8_t minor;
+ uint8_t patch;
+ uint8_t ctlr_type;
+ __le32 unk;
+ int8_t dsp_major;
+ int8_t dsp_minor;
+ int8_t dsp_patch;
+ int8_t dsp_type;
+};
+
+struct switch2_axis_calibration {
+ uint16_t neutral;
+ uint16_t negative;
+ uint16_t positive;
+};
+
+struct switch2_stick_calibration {
+ struct switch2_axis_calibration x;
+ struct switch2_axis_calibration y;
+};
+
+struct switch2_controller {
+ struct hid_device *hdev;
+ struct switch2_cfg_intf *cfg;
+
+ char name[64];
+ char phys[64];
+ struct list_head entry;
+ struct mutex lock;
+
+ enum switch2_ctlr_type ctlr_type;
+ enum switch2_init_step init_step;
+ struct input_dev __rcu *input;
+ char serial[NS2_FLASH_SIZE_SERIAL + 1];
+ struct switch2_version_info version;
+
+ struct switch2_stick_calibration stick_calib[2];
+ uint8_t lt_zero;
+ uint8_t rt_zero;
+
+ uint32_t player_id;
+ struct led_classdev leds[4];
+};
+
+static DEFINE_MUTEX(switch2_controllers_lock);
+static LIST_HEAD(switch2_controllers);
+
+struct switch2_ctlr_button_mapping {
+ uint32_t code;
+ int byte;
+ uint32_t bit;
+};
+
+static const struct switch2_ctlr_button_mapping ns2_left_joycon_button_mappings[] = {
+ { BTN_DPAD_LEFT, 0, NS2_BTNL_LEFT, },
+ { BTN_DPAD_UP, 0, NS2_BTNL_UP, },
+ { BTN_DPAD_DOWN, 0, NS2_BTNL_DOWN, },
+ { BTN_DPAD_RIGHT, 0, NS2_BTNL_RIGHT, },
+ { BTN_TL, 0, NS2_BTNL_L, },
+ { BTN_TL2, 0, NS2_BTNL_ZL, },
+ { BTN_SELECT, 0, NS2_BTNL_MINUS, },
+ { BTN_THUMBL, 0, NS2_BTNL_LS, },
+ { KEY_RECORD, 1, NS2_BTN_JCL_CAPTURE, },
+ { BTN_GRIPR, 1, NS2_BTN_JCL_SL, },
+ { BTN_GRIPR2, 1, NS2_BTN_JCL_SR, },
+ { BTN_GRIPL, 1, NS2_BTN_JCL_GL, },
+ { /* sentinel */ },
+};
+
+static const struct switch2_ctlr_button_mapping ns2_right_joycon_button_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTNR_A, },
+ { BTN_EAST, 0, NS2_BTNR_B, },
+ { BTN_NORTH, 0, NS2_BTNR_X, },
+ { BTN_WEST, 0, NS2_BTNR_Y, },
+ { BTN_TR, 0, NS2_BTNR_R, },
+ { BTN_TR2, 0, NS2_BTNR_ZR, },
+ { BTN_START, 0, NS2_BTNR_PLUS, },
+ { BTN_THUMBR, 0, NS2_BTNR_RS, },
+ { BTN_C, 1, NS2_BTN_JCR_C, },
+ { BTN_MODE, 1, NS2_BTN_JCR_HOME, },
+ { BTN_GRIPL2, 1, NS2_BTN_JCR_SL, },
+ { BTN_GRIPL, 1, NS2_BTN_JCR_SR, },
+ { BTN_GRIPR, 1, NS2_BTN_JCR_GR, },
+ { /* sentinel */ },
+};
+
+static const struct switch2_ctlr_button_mapping ns2_procon_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTNR_A, },
+ { BTN_EAST, 0, NS2_BTNR_B, },
+ { BTN_NORTH, 0, NS2_BTNR_X, },
+ { BTN_WEST, 0, NS2_BTNR_Y, },
+ { BTN_TL, 1, NS2_BTNL_L, },
+ { BTN_TR, 0, NS2_BTNR_R, },
+ { BTN_TL2, 1, NS2_BTNL_ZL, },
+ { BTN_TR2, 0, NS2_BTNR_ZR, },
+ { BTN_SELECT, 1, NS2_BTNL_MINUS, },
+ { BTN_START, 0, NS2_BTNR_PLUS, },
+ { BTN_THUMBL, 1, NS2_BTNL_LS, },
+ { BTN_THUMBR, 0, NS2_BTNR_RS, },
+ { BTN_MODE, 2, NS2_BTN_PRO_HOME },
+ { KEY_RECORD, 2, NS2_BTN_PRO_CAPTURE },
+ { BTN_GRIPR, 2, NS2_BTN_PRO_GR },
+ { BTN_GRIPL, 2, NS2_BTN_PRO_GL },
+ { BTN_C, 2, NS2_BTN_PRO_C },
+ { /* sentinel */ },
+};
+
+static const struct switch2_ctlr_button_mapping ns2_gccon_mappings[] = {
+ { BTN_SOUTH, 0, NS2_BTNR_A, },
+ { BTN_EAST, 0, NS2_BTNR_B, },
+ { BTN_NORTH, 0, NS2_BTNR_X, },
+ { BTN_WEST, 0, NS2_BTNR_Y, },
+ { BTN_TL2, 1, NS2_BTNL_L, },
+ { BTN_TR2, 0, NS2_BTNR_R, },
+ { BTN_TL, 1, NS2_BTNL_ZL, },
+ { BTN_TR, 0, NS2_BTNR_ZR, },
+ { BTN_SELECT, 1, NS2_BTNL_MINUS, },
+ { BTN_START, 0, NS2_BTNR_PLUS, },
+ { BTN_MODE, 2, NS2_BTN_GC_HOME },
+ { KEY_RECORD, 2, NS2_BTN_GC_CAPTURE },
+ { BTN_C, 2, NS2_BTN_GC_C },
+ { /* sentinel */ },
+};
+
+static const uint8_t switch2_init_cmd_data[] = {
+ /*
+ * The last 6 bytes of this packet are the MAC address of
+ * the console, but we don't need that for USB
+ */
+ 0x01, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
+};
+
+static const uint8_t switch2_one_data[] = { 0x01, 0x00, 0x00, 0x00 };
+
+static const uint8_t switch2_feature_mask[] = {
+ NS2_FEATURE_BUTTONS | NS2_FEATURE_ANALOG | NS2_FEATURE_IMU,
+ 0x00, 0x00, 0x00
+};
+
+static void switch2_init_step_done(struct switch2_controller *ns2, enum switch2_init_step step)
+{
+ if (ns2->init_step != step)
+ return;
+
+ ns2->init_step++;
+}
+
+static inline bool switch2_ctlr_is_joycon(enum switch2_ctlr_type type)
+{
+ return type == NS2_CTLR_TYPE_JCL || type == NS2_CTLR_TYPE_JCR;
+}
+
+static int switch2_set_leds(struct switch2_controller *ns2)
+{
+ int i;
+ uint8_t message[8] = { 0 };
+
+ for (i = 0; i < JC_NUM_LEDS; i++)
+ message[0] |= (!!ns2->leds[i].brightness) << i;
+
+ if (!ns2->cfg)
+ return -ENOTCONN;
+ return ns2->cfg->send_command(NS2_CMD_LED, NS2_SUBCMD_LED_PATTERN,
+ &message, sizeof(message),
+ ns2->cfg);
+}
+
+static int switch2_player_led_brightness_set(struct led_classdev *led,
+ enum led_brightness brightness)
+{
+ struct device *dev = led->dev->parent;
+ struct hid_device *hdev = to_hid_device(dev);
+ struct switch2_controller *ns2 = hid_get_drvdata(hdev);
+
+ if (!ns2)
+ return -ENODEV;
+
+ guard(mutex)(&ns2->lock);
+ return switch2_set_leds(ns2);
+}
+
+static void switch2_leds_create(struct switch2_controller *ns2)
+{
+ struct hid_device *hdev = ns2->hdev;
+ struct led_classdev *led;
+ int i;
+ int player_led_pattern;
+
+ player_led_pattern = ns2->player_id % JC_NUM_LED_PATTERNS;
+ hid_dbg(hdev, "assigned player %d led pattern", player_led_pattern + 1);
+
+ for (i = 0; i < JC_NUM_LEDS; i++) {
+ led = &ns2->leds[i];
+ led->brightness = joycon_player_led_patterns[player_led_pattern][i];
+ led->max_brightness = 1;
+ led->brightness_set_blocking = switch2_player_led_brightness_set;
+ led->flags = LED_CORE_SUSPENDRESUME | LED_HW_PLUGGABLE;
+ }
+}
+
+static void switch2_config_buttons(struct input_dev *idev,
+ const struct switch2_ctlr_button_mapping button_mappings[])
+{
+ const struct switch2_ctlr_button_mapping *button;
+
+ for (button = button_mappings; button->code; button++)
+ input_set_capability(idev, EV_KEY, button->code);
+}
+
+static int switch2_init_input(struct switch2_controller *ns2)
+{
+ struct input_dev *input;
+ struct hid_device *hdev = ns2->hdev;
+ int i;
+ int ret;
+
+ switch2_init_step_done(ns2, NS2_INIT_FINISH);
+
+ rcu_read_lock();
+ input = rcu_dereference(ns2->input);
+ rcu_read_unlock();
+
+ if (input)
+ return 0;
+
+ input = devm_input_allocate_device(&hdev->dev);
+ if (!input)
+ return -ENOMEM;
+
+ input_set_drvdata(input, ns2);
+ input->dev.parent = &hdev->dev;
+ input->id.bustype = hdev->bus;
+ input->id.vendor = hdev->vendor;
+ input->id.product = hdev->product;
+ input->id.version = hdev->version;
+ input->uniq = ns2->serial;
+ input->name = ns2->name;
+ input->phys = hdev->phys;
+
+ switch (ns2->ctlr_type) {
+ case NS2_CTLR_TYPE_JCL:
+ input_set_abs_params(input, ABS_X, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_Y, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ switch2_config_buttons(input, ns2_left_joycon_button_mappings);
+ break;
+ case NS2_CTLR_TYPE_JCR:
+ input_set_abs_params(input, ABS_X, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_Y, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ switch2_config_buttons(input, ns2_right_joycon_button_mappings);
+ break;
+ case NS2_CTLR_TYPE_GC:
+ input_set_abs_params(input, ABS_X, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_Y, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_RX, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_RY, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_Z, 0, NS2_TRIGGER_RANGE, 32, 128);
+ input_set_abs_params(input, ABS_RZ, 0, NS2_TRIGGER_RANGE, 32, 128);
+ input_set_abs_params(input, ABS_HAT0X, -1, 1, 0, 0);
+ input_set_abs_params(input, ABS_HAT0Y, -1, 1, 0, 0);
+ switch2_config_buttons(input, ns2_gccon_mappings);
+ break;
+ case NS2_CTLR_TYPE_PRO:
+ input_set_abs_params(input, ABS_X, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_Y, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_RX, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_RY, NS2_AXIS_MIN, NS2_AXIS_MAX, 32, 128);
+ input_set_abs_params(input, ABS_HAT0X, -1, 1, 0, 0);
+ input_set_abs_params(input, ABS_HAT0Y, -1, 1, 0, 0);
+ switch2_config_buttons(input, ns2_procon_mappings);
+ break;
+ default:
+ input_free_device(input);
+ return -EINVAL;
+ }
+
+ hid_info(ns2->hdev, "Firmware version %u.%u.%u (type %i)\n", ns2->version.major,
+ ns2->version.minor, ns2->version.patch, ns2->version.ctlr_type);
+ if (ns2->version.dsp_type >= 0)
+ hid_info(ns2->hdev, "DSP version %u.%u.%u\n", ns2->version.dsp_major,
+ ns2->version.dsp_minor, ns2->version.dsp_patch);
+
+ ret = input_register_device(input);
+ if (ret < 0) {
+ hid_err(ns2->hdev, "Failed to register input; ret=%d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < JC_NUM_LEDS; i++) {
+ struct led_classdev *led = &ns2->leds[i];
+ char *name = devm_kasprintf(&input->dev, GFP_KERNEL, "%s:%s:%s",
+ dev_name(&input->dev),
+ "green",
+ joycon_player_led_names[i]);
+
+ if (!name)
+ return -ENOMEM;
+
+ led->name = name;
+ ret = devm_led_classdev_register(&input->dev, led);
+ if (ret < 0) {
+ dev_err(&input->dev, "Failed to register player %d LED; ret=%d\n",
+ i + 1, ret);
+ input_unregister_device(input);
+ return ret;
+ }
+ }
+
+ rcu_assign_pointer(ns2->input, input);
+ synchronize_rcu();
+ return 0;
+}
+
+static struct switch2_controller *switch2_get_controller(const char *phys)
+{
+ struct switch2_controller *ns2;
+
+ guard(mutex)(&switch2_controllers_lock);
+ list_for_each_entry(ns2, &switch2_controllers, entry) {
+ if (strncmp(ns2->phys, phys, sizeof(ns2->phys)) == 0)
+ return ns2;
+ }
+ ns2 = kzalloc(sizeof(*ns2), GFP_KERNEL);
+ if (!ns2)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_init(&ns2->lock);
+ INIT_LIST_HEAD(&ns2->entry);
+ list_add(&ns2->entry, &switch2_controllers);
+ strscpy(ns2->phys, phys, sizeof(ns2->phys));
+ return ns2;
+}
+
+static void switch2_controller_put(struct switch2_controller *ns2)
+{
+ struct input_dev *input;
+ bool do_free;
+
+ guard(mutex)(&switch2_controllers_lock);
+ mutex_lock(&ns2->lock);
+
+ rcu_read_lock();
+ input = rcu_dereference(ns2->input);
+ rcu_read_unlock();
+
+ rcu_assign_pointer(ns2->input, NULL);
+ synchronize_rcu();
+
+ ns2->init_step = 0;
+ do_free = !ns2->hdev && !ns2->cfg;
+ mutex_unlock(&ns2->lock);
+
+ if (input)
+ input_unregister_device(input);
+
+ if (do_free) {
+ list_del_init(&ns2->entry);
+ mutex_destroy(&ns2->lock);
+ kfree(ns2);
+ }
+}
+
+static bool switch2_parse_stick_calibration(struct switch2_stick_calibration *calib,
+ const uint8_t *data)
+{
+ static const uint8_t UNCALIBRATED[9] = {
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
+ };
+ if (memcmp(UNCALIBRATED, data, sizeof(UNCALIBRATED)) == 0)
+ return false;
+
+ calib->x.neutral = data[0];
+ calib->x.neutral |= (data[1] & 0x0F) << 8;
+
+ calib->y.neutral = data[1] >> 4;
+ calib->y.neutral |= data[2] << 4;
+
+ calib->x.positive = data[3];
+ calib->x.positive |= (data[4] & 0x0F) << 8;
+
+ calib->y.positive = data[4] >> 4;
+ calib->y.positive |= data[5] << 4;
+
+ calib->x.negative = data[6];
+ calib->x.negative |= (data[7] & 0x0F) << 8;
+
+ calib->y.negative = data[7] >> 4;
+ calib->y.negative |= data[8] << 4;
+
+ return true;
+}
+
+static void switch2_handle_flash_read(struct switch2_controller *ns2, uint8_t size,
+ uint32_t address, const uint8_t *data)
+{
+ bool ok;
+
+ switch (address) {
+ case NS2_FLASH_ADDR_SERIAL:
+ if (size != NS2_FLASH_SIZE_SERIAL)
+ return;
+ memcpy(ns2->serial, data, size);
+ switch2_init_step_done(ns2, NS2_INIT_READ_SERIAL);
+ break;
+ case NS2_FLASH_ADDR_FACTORY_PRIMARY_CALIB:
+ if (size != NS2_FLASH_SIZE_FACTORY_AXIS_CALIB)
+ return;
+ switch2_init_step_done(ns2, NS2_INIT_READ_FACTORY_PRIMARY_CALIB);
+ ok = switch2_parse_stick_calibration(&ns2->stick_calib[0], data);
+ if (ok) {
+ hid_dbg(ns2->hdev, "Got factory primary stick calibration:\n");
+ hid_dbg(ns2->hdev, "Left max: %i, neutral: %i, right max: %i\n",
+ ns2->stick_calib[0].x.negative,
+ ns2->stick_calib[0].x.neutral,
+ ns2->stick_calib[0].x.positive);
+ hid_dbg(ns2->hdev, "Down max: %i, neutral: %i, up max: %i\n",
+ ns2->stick_calib[0].y.negative,
+ ns2->stick_calib[0].y.neutral,
+ ns2->stick_calib[0].y.positive);
+ } else {
+ hid_dbg(ns2->hdev, "Factory primary stick calibration not present\n");
+ }
+ break;
+ case NS2_FLASH_ADDR_FACTORY_SECONDARY_CALIB:
+ if (size != NS2_FLASH_SIZE_FACTORY_AXIS_CALIB)
+ return;
+ switch2_init_step_done(ns2, NS2_INIT_READ_FACTORY_SECONDARY_CALIB);
+ ok = switch2_parse_stick_calibration(&ns2->stick_calib[1], data);
+ if (ok) {
+ hid_dbg(ns2->hdev, "Got factory secondary stick calibration:\n");
+ hid_dbg(ns2->hdev, "Left max: %i, neutral: %i, right max: %i\n",
+ ns2->stick_calib[1].x.negative,
+ ns2->stick_calib[1].x.neutral,
+ ns2->stick_calib[1].x.positive);
+ hid_dbg(ns2->hdev, "Down max: %i, neutral: %i, up max: %i\n",
+ ns2->stick_calib[1].y.negative,
+ ns2->stick_calib[1].y.neutral,
+ ns2->stick_calib[1].y.positive);
+ } else {
+ hid_dbg(ns2->hdev, "Factory secondary stick calibration not present\n");
+ }
+ break;
+ case NS2_FLASH_ADDR_FACTORY_TRIGGER_CALIB:
+ if (size != NS2_FLASH_SIZE_FACTORY_TRIGGER_CALIB)
+ return;
+ switch2_init_step_done(ns2, NS2_INIT_READ_FACTORY_TRIGGER_CALIB);
+ if (data[0] != 0xFF && data[1] != 0xFF) {
+ ns2->lt_zero = data[0];
+ ns2->rt_zero = data[1];
+
+ hid_dbg(ns2->hdev, "Got factory trigger calibration:\n");
+ hid_dbg(ns2->hdev, "Left zero point: %i\n", ns2->lt_zero);
+ hid_dbg(ns2->hdev, "Right zero point: %i\n", ns2->rt_zero);
+ } else {
+ hid_dbg(ns2->hdev, "Factory trigger calibration not present\n");
+ }
+ break;
+ case NS2_FLASH_ADDR_USER_PRIMARY_CALIB:
+ if (size != NS2_FLASH_SIZE_USER_AXIS_CALIB)
+ return;
+ switch2_init_step_done(ns2, NS2_INIT_READ_USER_PRIMARY_CALIB);
+ if (__le16_to_cpu(*(__le16 *)data) != NS2_USER_CALIB_MAGIC) {
+ hid_dbg(ns2->hdev, "No user primary stick calibration present\n");
+ break;
+ }
+
+ ok = switch2_parse_stick_calibration(&ns2->stick_calib[0], &data[2]);
+ if (ok) {
+ hid_dbg(ns2->hdev, "Got user primary stick calibration:\n");
+ hid_dbg(ns2->hdev, "Left max: %i, neutral: %i, right max: %i\n",
+ ns2->stick_calib[0].x.negative,
+ ns2->stick_calib[0].x.neutral,
+ ns2->stick_calib[0].x.positive);
+ hid_dbg(ns2->hdev, "Down max: %i, neutral: %i, up max: %i\n",
+ ns2->stick_calib[0].y.negative,
+ ns2->stick_calib[0].y.neutral,
+ ns2->stick_calib[0].y.positive);
+ } else {
+ hid_dbg(ns2->hdev, "No user primary stick calibration present\n");
+ }
+ break;
+ case NS2_FLASH_ADDR_USER_SECONDARY_CALIB:
+ if (size != NS2_FLASH_SIZE_USER_AXIS_CALIB)
+ return;
+ switch2_init_step_done(ns2, NS2_INIT_READ_USER_SECONDARY_CALIB);
+ if (__le16_to_cpu(*(__le16 *)data) != NS2_USER_CALIB_MAGIC) {
+ hid_dbg(ns2->hdev, "No user secondary stick calibration present\n");
+ break;
+ }
+
+ ok = switch2_parse_stick_calibration(&ns2->stick_calib[1], &data[2]);
+ if (ok) {
+ hid_dbg(ns2->hdev, "Got user secondary stick calibration:\n");
+ hid_dbg(ns2->hdev, "Left max: %i, neutral: %i, right max: %i\n",
+ ns2->stick_calib[1].x.negative,
+ ns2->stick_calib[1].x.neutral,
+ ns2->stick_calib[1].x.positive);
+ hid_dbg(ns2->hdev, "Down max: %i, neutral: %i, up max: %i\n",
+ ns2->stick_calib[1].y.negative,
+ ns2->stick_calib[1].y.neutral,
+ ns2->stick_calib[1].y.positive);
+ } else {
+ hid_dbg(ns2->hdev, "No user secondary stick calibration present\n");
+ }
+ break;
+ }
+}
+
+static void switch2_report_buttons(struct input_dev *input, const uint8_t *bytes,
+ const struct switch2_ctlr_button_mapping button_mappings[])
+{
+ const struct switch2_ctlr_button_mapping *button;
+
+ for (button = button_mappings; button->code; button++)
+ input_report_key(input, button->code, bytes[button->byte] & button->bit);
+}
+
+static void switch2_report_axis(struct input_dev *input, struct switch2_axis_calibration *calib,
+ int axis, bool invert, int value)
+{
+ if (calib && calib->neutral && calib->negative && calib->positive) {
+ value -= calib->neutral;
+ value *= NS2_AXIS_MAX + 1;
+ if (value < 0)
+ value /= calib->negative;
+ else
+ value /= calib->positive;
+ } else {
+ value = (value - 2048) * 16;
+ }
+
+ if (invert)
+ value = -value;
+ input_report_abs(input, axis,
+ clamp(value, NS2_AXIS_MIN, NS2_AXIS_MAX));
+}
+
+static void switch2_report_stick(struct input_dev *input, struct switch2_stick_calibration *calib,
+ int x, bool invert_x, int y, bool invert_y, const uint8_t *data)
+{
+ switch2_report_axis(input, &calib->x, x, invert_x, data[0] | ((data[1] & 0x0F) << 8));
+ switch2_report_axis(input, &calib->y, y, invert_y, (data[1] >> 4) | (data[2] << 4));
+}
+
+static void switch2_report_trigger(struct input_dev *input, uint8_t zero, int abs, uint8_t data)
+{
+ int value = (NS2_TRIGGER_RANGE + 1) * (data - zero) / (232 - zero);
+
+ input_report_abs(input, abs, clamp(value, 0, NS2_TRIGGER_RANGE));
+}
+
+static int switch2_event(struct hid_device *hdev, struct hid_report *report, uint8_t *raw_data,
+ int size)
+{
+ struct switch2_controller *ns2 = hid_get_drvdata(hdev);
+ struct input_dev *input;
+
+ if (report->type != HID_INPUT_REPORT)
+ return 0;
+
+ if (size < 15)
+ return -EINVAL;
+
+ guard(rcu)();
+ input = rcu_dereference(ns2->input);
+
+ if (!input)
+ return 0;
+
+ switch (report->id) {
+ case NS2_REPORT_UNIFIED:
+ /*
+ * TODO
+ * This won't be sent unless the report type gets changed via command
+ * 03-0A, but we should support it at some point regardless.
+ */
+ break;
+ case NS2_REPORT_JCL:
+ switch2_report_stick(input, &ns2->stick_calib[0], ABS_X, false,
+ ABS_Y, true, &raw_data[6]);
+ switch2_report_buttons(input, &raw_data[3], ns2_left_joycon_button_mappings);
+ break;
+ case NS2_REPORT_JCR:
+ switch2_report_stick(input, &ns2->stick_calib[0], ABS_X, false,
+ ABS_Y, true, &raw_data[6]);
+ switch2_report_buttons(input, &raw_data[3], ns2_right_joycon_button_mappings);
+ break;
+ case NS2_REPORT_GC:
+ input_report_abs(input, ABS_HAT0X,
+ !!(raw_data[4] & NS2_BTNL_RIGHT) -
+ !!(raw_data[4] & NS2_BTNL_LEFT));
+ input_report_abs(input, ABS_HAT0Y,
+ !!(raw_data[4] & NS2_BTNL_DOWN) -
+ !!(raw_data[4] & NS2_BTNL_UP));
+ switch2_report_buttons(input, &raw_data[3], ns2_gccon_mappings);
+ switch2_report_stick(input, &ns2->stick_calib[0], ABS_X, false,
+ ABS_Y, true, &raw_data[6]);
+ switch2_report_stick(input, &ns2->stick_calib[1], ABS_RX, false,
+ ABS_RY, true, &raw_data[9]);
+ switch2_report_trigger(input, ns2->lt_zero, ABS_Z, raw_data[13]);
+ switch2_report_trigger(input, ns2->rt_zero, ABS_RZ, raw_data[14]);
+ break;
+ case NS2_REPORT_PRO:
+ input_report_abs(input, ABS_HAT0X,
+ !!(raw_data[4] & NS2_BTNL_RIGHT) -
+ !!(raw_data[4] & NS2_BTNL_LEFT));
+ input_report_abs(input, ABS_HAT0Y,
+ !!(raw_data[4] & NS2_BTNL_DOWN) -
+ !!(raw_data[4] & NS2_BTNL_UP));
+ switch2_report_buttons(input, &raw_data[3], ns2_procon_mappings);
+ switch2_report_stick(input, &ns2->stick_calib[0], ABS_X, false,
+ ABS_Y, true, &raw_data[6]);
+ switch2_report_stick(input, &ns2->stick_calib[1], ABS_RX, false,
+ ABS_RY, true, &raw_data[9]);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ input_sync(input);
+ return 0;
+}
+
+static int switch2_features_enable(struct switch2_controller *ns2, int features)
+{
+ __le32 feature_bits = __cpu_to_le32(features);
+
+ if (!ns2->cfg)
+ return -ENOTCONN;
+ return ns2->cfg->send_command(NS2_CMD_FEATSEL, NS2_SUBCMD_FEATSEL_ENABLE,
+ &feature_bits, sizeof(feature_bits),
+ ns2->cfg);
+}
+
+static int switch2_read_flash(struct switch2_controller *ns2, uint32_t address,
+ uint8_t size)
+{
+ uint8_t message[8] = { size, 0x7e };
+
+ if (!ns2->cfg)
+ return -ENOTCONN;
+ *(__le32 *)&message[4] = __cpu_to_le32(address);
+ return ns2->cfg->send_command(NS2_CMD_FLASH, NS2_SUBCMD_FLASH_READ, message,
+ sizeof(message), ns2->cfg);
+}
+
+static int switch2_set_player_id(struct switch2_controller *ns2, uint32_t player_id)
+{
+ int i;
+ int player_led_pattern = player_id % JC_NUM_LED_PATTERNS;
+
+ for (i = 0; i < JC_NUM_LEDS; i++)
+ ns2->leds[i].brightness = joycon_player_led_patterns[player_led_pattern][i];
+
+ return switch2_set_leds(ns2);
+}
+
+static int switch2_set_report_format(struct switch2_controller *ns2, enum switch2_report_id fmt)
+{
+ __le32 format_id = __cpu_to_le32(fmt);
+
+ if (!ns2->cfg)
+ return -ENOTCONN;
+ return ns2->cfg->send_command(NS2_CMD_INIT, NS2_SUBCMD_INIT_SELECT_REPORT,
+ &format_id, sizeof(format_id),
+ ns2->cfg);
+}
+
+static int switch2_init_controller(struct switch2_controller *ns2)
+{
+ if (ns2->init_step == NS2_INIT_DONE)
+ return 0;
+
+ if (!ns2->cfg)
+ return -ENOTCONN;
+
+ switch (ns2->init_step) {
+ case NS2_INIT_READ_SERIAL:
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_SERIAL,
+ NS2_FLASH_SIZE_SERIAL);
+ case NS2_INIT_GET_FIRMWARE_INFO:
+ return ns2->cfg->send_command(NS2_CMD_FW_INFO, NS2_SUBCMD_FW_INFO_GET,
+ NULL, 0, ns2->cfg);
+ case NS2_INIT_READ_FACTORY_PRIMARY_CALIB:
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_FACTORY_PRIMARY_CALIB,
+ NS2_FLASH_SIZE_FACTORY_AXIS_CALIB);
+ case NS2_INIT_READ_FACTORY_SECONDARY_CALIB:
+ if (switch2_ctlr_is_joycon(ns2->ctlr_type)) {
+ switch2_init_step_done(ns2, NS2_INIT_READ_FACTORY_SECONDARY_CALIB);
+ return switch2_init_controller(ns2);
+ }
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_FACTORY_SECONDARY_CALIB,
+ NS2_FLASH_SIZE_FACTORY_AXIS_CALIB);
+ case NS2_INIT_READ_FACTORY_TRIGGER_CALIB:
+ if (ns2->ctlr_type != NS2_CTLR_TYPE_GC) {
+ switch2_init_step_done(ns2, NS2_INIT_READ_FACTORY_TRIGGER_CALIB);
+ return switch2_init_controller(ns2);
+ }
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_FACTORY_TRIGGER_CALIB,
+ NS2_FLASH_SIZE_FACTORY_TRIGGER_CALIB);
+ case NS2_INIT_READ_USER_PRIMARY_CALIB:
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_USER_PRIMARY_CALIB,
+ NS2_FLASH_SIZE_USER_AXIS_CALIB);
+ case NS2_INIT_READ_USER_SECONDARY_CALIB:
+ if (switch2_ctlr_is_joycon(ns2->ctlr_type)) {
+ switch2_init_step_done(ns2, NS2_INIT_READ_USER_SECONDARY_CALIB);
+ return switch2_init_controller(ns2);
+ }
+ return switch2_read_flash(ns2, NS2_FLASH_ADDR_USER_SECONDARY_CALIB,
+ NS2_FLASH_SIZE_USER_AXIS_CALIB);
+ case NS2_INIT_SET_FEATURE_MASK:
+ return ns2->cfg->send_command(NS2_CMD_FEATSEL, NS2_SUBCMD_FEATSEL_SET_MASK,
+ switch2_feature_mask, sizeof(switch2_feature_mask), ns2->cfg);
+ case NS2_INIT_ENABLE_FEATURES:
+ return switch2_features_enable(ns2, NS2_FEATURE_BUTTONS | NS2_FEATURE_ANALOG);
+ case NS2_INIT_GRIP_BUTTONS:
+ if (!switch2_ctlr_is_joycon(ns2->ctlr_type)) {
+ switch2_init_step_done(ns2, NS2_INIT_GRIP_BUTTONS);
+ return switch2_init_controller(ns2);
+ }
+ return ns2->cfg->send_command(NS2_CMD_GRIP, NS2_SUBCMD_GRIP_ENABLE_BUTTONS,
+ switch2_one_data, sizeof(switch2_one_data),
+ ns2->cfg);
+ case NS2_INIT_REPORT_FORMAT:
+ switch (ns2->ctlr_type) {
+ case NS2_CTLR_TYPE_JCL:
+ return switch2_set_report_format(ns2, NS2_REPORT_JCL);
+ case NS2_CTLR_TYPE_JCR:
+ return switch2_set_report_format(ns2, NS2_REPORT_JCR);
+ case NS2_CTLR_TYPE_PRO:
+ return switch2_set_report_format(ns2, NS2_REPORT_PRO);
+ case NS2_CTLR_TYPE_GC:
+ return switch2_set_report_format(ns2, NS2_REPORT_GC);
+ default:
+ switch2_init_step_done(ns2, NS2_INIT_REPORT_FORMAT);
+ return switch2_init_controller(ns2);
+ }
+ case NS2_INIT_SET_PLAYER_LEDS:
+ return switch2_set_player_id(ns2, ns2->player_id);
+ case NS2_INIT_INPUT:
+ return ns2->cfg->send_command(NS2_CMD_INIT, NS2_SUBCMD_INIT_USB,
+ switch2_init_cmd_data, sizeof(switch2_init_cmd_data), ns2->cfg);
+ case NS2_INIT_FINISH:
+ if (ns2->hdev)
+ return switch2_init_input(ns2);
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
+ return 0;
+}
+
+int switch2_receive_command(struct switch2_controller *ns2,
+ const uint8_t *message, size_t length)
+{
+ const struct switch2_cmd_header *header;
+ int ret = 0;
+
+ if (length < 8)
+ return -EINVAL;
+
+ print_hex_dump_debug("got cmd: ", DUMP_PREFIX_OFFSET, 16, 1, message, length, false);
+
+ guard(mutex)(&ns2->lock);
+
+ header = (const struct switch2_cmd_header *)message;
+ if (!(header->flags & NS2_FLAG_OK)) {
+ ret = -EIO;
+ goto exit;
+ }
+ message = &message[8];
+ switch (header->command) {
+ case NS2_CMD_FLASH:
+ if (header->subcommand == NS2_SUBCMD_FLASH_READ) {
+ uint8_t read_size;
+ uint32_t read_address;
+
+ if (length < 16) {
+ ret = -EINVAL;
+ goto exit;
+ }
+ read_size = message[0];
+ read_address = __le32_to_cpu(*(__le32 *)&message[4]);
+ if (length < read_size + 16) {
+ ret = -EINVAL;
+ goto exit;
+ }
+ switch2_handle_flash_read(ns2, read_size, read_address, &message[8]);
+ }
+ break;
+ case NS2_CMD_INIT:
+ if (header->subcommand == NS2_SUBCMD_INIT_USB)
+ switch2_init_step_done(ns2, NS2_INIT_INPUT);
+ else if (header->subcommand == NS2_SUBCMD_INIT_SELECT_REPORT)
+ switch2_init_step_done(ns2, NS2_INIT_REPORT_FORMAT);
+ break;
+ case NS2_CMD_GRIP:
+ if (header->subcommand == NS2_SUBCMD_GRIP_ENABLE_BUTTONS)
+ switch2_init_step_done(ns2, NS2_INIT_GRIP_BUTTONS);
+ break;
+ case NS2_CMD_LED:
+ if (header->subcommand == NS2_SUBCMD_LED_PATTERN)
+ switch2_init_step_done(ns2, NS2_INIT_SET_PLAYER_LEDS);
+ break;
+ case NS2_CMD_FEATSEL:
+ if (header->subcommand == NS2_SUBCMD_FEATSEL_SET_MASK)
+ switch2_init_step_done(ns2, NS2_INIT_SET_FEATURE_MASK);
+ else if (header->subcommand == NS2_SUBCMD_FEATSEL_ENABLE)
+ switch2_init_step_done(ns2, NS2_INIT_ENABLE_FEATURES);
+ break;
+ case NS2_CMD_FW_INFO:
+ if (header->subcommand == NS2_SUBCMD_FW_INFO_GET) {
+ if (length < sizeof(ns2->version)) {
+ ret = -EINVAL;
+ goto exit;
+ }
+ memcpy(&ns2->version, message, sizeof(ns2->version));
+ ns2->ctlr_type = ns2->version.ctlr_type;
+ switch2_init_step_done(ns2, NS2_INIT_GET_FIRMWARE_INFO);
+ }
+ break;
+ default:
+ break;
+ }
+
+exit:
+ if (ns2->init_step < NS2_INIT_DONE)
+ switch2_init_controller(ns2);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(switch2_receive_command);
+
+int switch2_controller_attach_cfg(const char *phys, struct switch2_cfg_intf *cfg)
+{
+ struct switch2_controller *ns2 = switch2_get_controller(phys);
+
+ if (IS_ERR(ns2))
+ return PTR_ERR(ns2);
+
+ cfg->parent = ns2;
+
+ guard(mutex)(&ns2->lock);
+ WARN_ON(ns2->cfg);
+ ns2->cfg = cfg;
+
+ if (ns2->hdev)
+ return switch2_init_controller(ns2);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(switch2_controller_attach_cfg);
+
+void switch2_controller_detach_cfg(struct switch2_controller *ns2)
+{
+ mutex_lock(&ns2->lock);
+ WARN_ON(ns2 != ns2->cfg->parent);
+ ns2->cfg = NULL;
+ mutex_unlock(&ns2->lock);
+ switch2_controller_put(ns2);
+}
+EXPORT_SYMBOL_GPL(switch2_controller_detach_cfg);
+
+static int switch2_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct switch2_controller *ns2;
+ struct usb_device *udev;
+ char phys[64];
+ int ret;
+
+ if (!hid_is_usb(hdev))
+ return -ENODEV;
+
+ udev = hid_to_usb_dev(hdev);
+ if (usb_make_path(udev, phys, sizeof(phys)) < 0)
+ return -EINVAL;
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "parse failed %d\n", ret);
+ return ret;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ if (ret) {
+ hid_err(hdev, "hw_start failed %d\n", ret);
+ return ret;
+ }
+
+ ret = hid_hw_open(hdev);
+ if (ret) {
+ hid_err(hdev, "hw_open failed %d\n", ret);
+ goto err_stop;
+ }
+
+ ns2 = switch2_get_controller(phys);
+ if (!ns2) {
+ ret = -ENOMEM;
+ goto err_close;
+ }
+
+ guard(mutex)(&ns2->lock);
+ WARN_ON(ns2->hdev);
+ ns2->hdev = hdev;
+ switch (hdev->product | (hdev->vendor << 16)) {
+ default:
+ strscpy(ns2->name, hdev->name, sizeof(ns2->name));
+ break;
+ /* Some controllers have slightly wrong names so we override them */
+ case USB_DEVICE_ID_NINTENDO_NS2_JOYCONR | (USB_VENDOR_ID_NINTENDO << 16):
+ /* Missing the "2" in the name */
+ strscpy(ns2->name, "Nintendo Joy-Con 2 (R)", sizeof(ns2->name));
+ break;
+ case USB_DEVICE_ID_NINTENDO_NS2_GCCON | (USB_VENDOR_ID_NINTENDO << 16):
+ /* Has "Nintendo" in the name twice */
+ strscpy(ns2->name, "Nintendo GameCube Controller", sizeof(ns2->name));
+ break;
+ }
+
+ ns2->player_id = U32_MAX;
+ ret = ida_alloc(&nintendo_player_id_allocator, GFP_KERNEL);
+ if (ret < 0)
+ hid_warn(hdev, "Failed to allocate player ID, skipping; ret=%d\n", ret);
+ else
+ ns2->player_id = ret;
+
+ switch2_leds_create(ns2);
+
+ hid_set_drvdata(hdev, ns2);
+
+ if (ns2->cfg)
+ return switch2_init_controller(ns2);
+
+ return 0;
+
+err_close:
+ hid_hw_close(hdev);
+err_stop:
+ hid_hw_stop(hdev);
+
+ return ret;
+}
+
+static void switch2_remove(struct hid_device *hdev)
+{
+ struct switch2_controller *ns2 = hid_get_drvdata(hdev);
+
+ hid_hw_close(hdev);
+ mutex_lock(&ns2->lock);
+ WARN_ON(ns2->hdev != hdev);
+ ns2->hdev = NULL;
+ mutex_unlock(&ns2->lock);
+ ida_free(&nintendo_player_id_allocator, ns2->player_id);
+ switch2_controller_put(ns2);
+ hid_hw_stop(hdev);
+}
+
static const struct hid_device_id nintendo_hid_devices[] = {
+ /* Switch devices */
{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
USB_DEVICE_ID_NINTENDO_PROCON) },
{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
@@ -2813,10 +3935,69 @@ static const struct hid_device_id nintendo_hid_devices[] = {
USB_DEVICE_ID_NINTENDO_GENCON) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
USB_DEVICE_ID_NINTENDO_N64CON) },
+ /* Switch 2 devices */
+ { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+ USB_DEVICE_ID_NINTENDO_NS2_JOYCONL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+ USB_DEVICE_ID_NINTENDO_NS2_JOYCONR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+ USB_DEVICE_ID_NINTENDO_NS2_PROCON) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+ USB_DEVICE_ID_NINTENDO_NS2_GCCON) },
{ }
};
MODULE_DEVICE_TABLE(hid, nintendo_hid_devices);
+static bool nintendo_is_switch2(struct hid_device *hdev)
+{
+ return hdev->vendor == USB_VENDOR_ID_NINTENDO &&
+ hdev->product >= USB_DEVICE_ID_NINTENDO_NS2_JOYCONR;
+}
+
+static void nintendo_hid_remove(struct hid_device *hdev)
+{
+ if (nintendo_is_switch2(hdev))
+ switch2_remove(hdev);
+ else
+ joycon_remove(hdev);
+}
+
+static int nintendo_hid_event(struct hid_device *hdev,
+ struct hid_report *report, u8 *raw_data, int size)
+{
+ if (nintendo_is_switch2(hdev))
+ return switch2_event(hdev, report, raw_data, size);
+ else
+ return joycon_event(hdev, report, raw_data, size);
+}
+
+static int nintendo_hid_probe(struct hid_device *hdev,
+ const struct hid_device_id *id)
+{
+ if (nintendo_is_switch2(hdev))
+ return switch2_probe(hdev, id);
+ else
+ return joycon_probe(hdev, id);
+}
+
+#ifdef CONFIG_PM
+static int nintendo_hid_resume(struct hid_device *hdev)
+{
+ if (nintendo_is_switch2(hdev))
+ return 0;
+ else
+ return joycon_resume(hdev);
+}
+
+static int nintendo_hid_suspend(struct hid_device *hdev, pm_message_t message)
+{
+ if (nintendo_is_switch2(hdev))
+ return 0;
+ else
+ return joycon_suspend(hdev, message);
+}
+#endif
+
static struct hid_driver nintendo_hid_driver = {
.name = "nintendo",
.id_table = nintendo_hid_devices,
@@ -2844,4 +4025,5 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ryan McClelland <rymcclel@gmail.com>");
MODULE_AUTHOR("Emily Strickland <linux@emily.st>");
MODULE_AUTHOR("Daniel J. Ogorchock <djogorchock@gmail.com>");
+MODULE_AUTHOR("Vicki Pfau <vi@endrift.com>");
MODULE_DESCRIPTION("Driver for Nintendo Switch Controllers");
diff --git a/drivers/hid/hid-nintendo.h b/drivers/hid/hid-nintendo.h
new file mode 100644
index 0000000000000..7aff22f302661
--- /dev/null
+++ b/drivers/hid/hid-nintendo.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * HID driver for Nintendo Switch 2 controllers
+ *
+ * Copyright (c) 2025 Valve Software
+ *
+ * This driver is based on the following work:
+ * https://gist.github.com/shinyquagsire23/66f006b46c56216acbaac6c1e2279b64
+ * https://github.com/ndeadly/switch2_controller_research
+ */
+
+#ifndef __HID_NINTENDO_H
+#define __HID_NINTENDO_H
+
+#include <linux/bits.h>
+
+#define NS2_FLAG_OK BIT(0)
+#define NS2_FLAG_NACK BIT(2)
+
+enum switch2_cmd {
+ NS2_CMD_NFC = 0x01,
+ NS2_CMD_FLASH = 0x02,
+ NS2_CMD_INIT = 0x03,
+ NS2_CMD_GRIP = 0x08,
+ NS2_CMD_LED = 0x09,
+ NS2_CMD_VIBRATE = 0x0a,
+ NS2_CMD_BATTERY = 0x0b,
+ NS2_CMD_FEATSEL = 0x0c,
+ NS2_CMD_FW_UPD = 0x0d,
+ NS2_CMD_FW_INFO = 0x10,
+ NS2_CMD_BT_PAIR = 0x15,
+};
+
+enum switch2_direction {
+ NS2_DIR_IN = 0x00,
+ NS2_DIR_OUT = 0x90,
+};
+
+enum switch2_transport {
+ NS2_TRANS_USB = 0x00,
+ NS2_TRANS_BT = 0x01,
+};
+
+struct switch2_cmd_header {
+ uint8_t command;
+ uint8_t flags;
+ uint8_t transport;
+ uint8_t subcommand;
+ uint8_t unk1;
+ uint8_t length;
+ uint16_t unk2;
+};
+static_assert(sizeof(struct switch2_cmd_header) == 8);
+
+struct device;
+struct switch2_controller;
+struct switch2_cfg_intf {
+ struct switch2_controller *parent;
+ struct device *dev;
+
+ int (*send_command)(enum switch2_cmd command, uint8_t subcommand,
+ const void *message, size_t length,
+ struct switch2_cfg_intf *intf);
+};
+
+int switch2_controller_attach_cfg(const char *phys, struct switch2_cfg_intf *cfg);
+void switch2_controller_detach_cfg(struct switch2_controller *controller);
+
+int switch2_receive_command(struct switch2_controller *controller,
+ const uint8_t *message, size_t length);
+
+#endif
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 7755e5b454d2c..868262c6ccd9a 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -422,4 +422,15 @@ config JOYSTICK_SEESAW
To compile this driver as a module, choose M here: the module will be
called adafruit-seesaw.
+config JOYSTICK_NINTENDO_SWITCH2_USB
+ tristate "Wired Nintendo Switch 2 controller support"
+ depends on HID_NINTENDO
+ depends on USB
+ help
+ Say Y here if you want to enable support for wired Nintendo Switch 2
+ controllers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nintendo-switch2-usb.
+
endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 9976f596a9208..8f92900ae8856 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_JOYSTICK_SIDEWINDER) += sidewinder.o
obj-$(CONFIG_JOYSTICK_SPACEBALL) += spaceball.o
obj-$(CONFIG_JOYSTICK_SPACEORB) += spaceorb.o
obj-$(CONFIG_JOYSTICK_STINGER) += stinger.o
+obj-$(CONFIG_JOYSTICK_NINTENDO_SWITCH2_USB) += nintendo-switch2-usb.o
obj-$(CONFIG_JOYSTICK_TMDC) += tmdc.o
obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o
obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o
diff --git a/drivers/input/joystick/nintendo-switch2-usb.c b/drivers/input/joystick/nintendo-switch2-usb.c
new file mode 100644
index 0000000000000..ebd89d852e21a
--- /dev/null
+++ b/drivers/input/joystick/nintendo-switch2-usb.c
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * USB driver for Nintendo Switch 2 controllers configuration interface
+ *
+ * Copyright (c) 2025 Valve Software
+ *
+ * This driver is based on the following work:
+ * https://gist.github.com/shinyquagsire23/66f006b46c56216acbaac6c1e2279b64
+ * https://github.com/ndeadly/switch2_controller_research
+ */
+
+#include "../../hid/hid-ids.h"
+#include "../../hid/hid-nintendo.h"
+#include <linux/module.h>
+#include <linux/usb/input.h>
+
+#define NS2_BULK_SIZE 64
+#define NS2_IN_URBS 2
+#define NS2_OUT_URBS 4
+
+static struct usb_driver switch2_usb;
+
+struct switch2_urb {
+ struct urb *urb;
+ uint8_t *data;
+ bool active;
+};
+
+struct switch2_usb {
+ struct switch2_cfg_intf cfg;
+ struct usb_device *udev;
+
+ struct switch2_urb bulk_in[NS2_IN_URBS];
+ struct usb_anchor bulk_in_anchor;
+ spinlock_t bulk_in_lock;
+
+ struct switch2_urb bulk_out[NS2_OUT_URBS];
+ struct usb_anchor bulk_out_anchor;
+ spinlock_t bulk_out_lock;
+
+ int message_in;
+ struct work_struct message_in_work;
+};
+
+static void switch2_bulk_in(struct urb *urb)
+{
+ struct switch2_usb *ns2_usb = urb->context;
+ int i;
+ bool schedule = false;
+ unsigned long flags;
+
+ switch (urb->status) {
+ case 0:
+ schedule = true;
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dev_dbg(&ns2_usb->udev->dev, "shutting down input urb: %d\n", urb->status);
+ return;
+ default:
+ dev_dbg(&ns2_usb->udev->dev, "unknown input urb status: %d\n", urb->status);
+ break;
+ }
+
+ spin_lock_irqsave(&ns2_usb->bulk_in_lock, flags);
+ for (i = 0; i < NS2_IN_URBS; i++) {
+ int err;
+ struct switch2_urb *ns2_urb;
+
+ if (ns2_usb->bulk_in[i].urb == urb) {
+ ns2_usb->message_in = i;
+ continue;
+ }
+
+ if (ns2_usb->bulk_in[i].active)
+ continue;
+
+ ns2_urb = &ns2_usb->bulk_in[i];
+ usb_anchor_urb(ns2_urb->urb, &ns2_usb->bulk_in_anchor);
+ err = usb_submit_urb(ns2_urb->urb, GFP_ATOMIC);
+ if (err) {
+ usb_unanchor_urb(ns2_urb->urb);
+ dev_dbg(&ns2_usb->udev->dev, "failed to queue input urb: %d\n", err);
+ } else {
+ ns2_urb->active = true;
+ }
+ }
+ spin_unlock_irqrestore(&ns2_usb->bulk_in_lock, flags);
+
+ if (schedule)
+ schedule_work(&ns2_usb->message_in_work);
+}
+
+static void switch2_bulk_out(struct urb *urb)
+{
+ struct switch2_usb *ns2_usb = urb->context;
+ int i;
+
+ guard(spinlock_irqsave)(&ns2_usb->bulk_out_lock);
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dev_dbg(&ns2_usb->udev->dev, "shutting down output urb: %d\n", urb->status);
+ return;
+ default:
+ dev_dbg(&ns2_usb->udev->dev, "unknown output urb status: %d\n", urb->status);
+ return;
+ }
+
+ for (i = 0; i < NS2_OUT_URBS; i++) {
+ if (ns2_usb->bulk_out[i].urb != urb)
+ continue;
+
+ ns2_usb->bulk_out[i].active = false;
+ break;
+ }
+}
+
+static int switch2_usb_send_cmd(enum switch2_cmd command, uint8_t subcommand,
+ const void *message, size_t size, struct switch2_cfg_intf *cfg)
+{
+ struct switch2_usb *ns2_usb = (struct switch2_usb *)cfg;
+ struct switch2_urb *urb = NULL;
+ int i;
+ int ret;
+ unsigned long flags;
+
+ struct switch2_cmd_header header = {
+ command, NS2_DIR_OUT | NS2_FLAG_OK, NS2_TRANS_USB, subcommand, 0, size
+ };
+
+ if (WARN_ON(size > 56))
+ return -EINVAL;
+
+ spin_lock_irqsave(&ns2_usb->bulk_out_lock, flags);
+ for (i = 0; i < NS2_OUT_URBS; i++) {
+ if (ns2_usb->bulk_out[i].active)
+ continue;
+
+ urb = &ns2_usb->bulk_out[i];
+ urb->active = true;
+ break;
+ }
+ spin_unlock_irqrestore(&ns2_usb->bulk_out_lock, flags);
+
+ if (!urb) {
+ dev_warn(&ns2_usb->udev->dev, "output queue full, dropping message\n");
+ return -ENOBUFS;
+ }
+
+ memcpy(urb->data, &header, sizeof(header));
+ if (message && size)
+ memcpy(&urb->data[8], message, size);
+ urb->urb->transfer_buffer_length = size + sizeof(header);
+
+ print_hex_dump_debug("sending cmd: ", DUMP_PREFIX_OFFSET, 16, 1, urb->data,
+ size + sizeof(header), false);
+
+ usb_anchor_urb(urb->urb, &ns2_usb->bulk_out_anchor);
+ ret = usb_submit_urb(urb->urb, GFP_ATOMIC);
+ if (ret) {
+ if (ret != -ENODEV)
+ dev_warn(&ns2_usb->udev->dev, "failed to submit output urb: %i", ret);
+ urb->active = false;
+ usb_unanchor_urb(urb->urb);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void switch2_usb_message_in_work(struct work_struct *work)
+{
+ struct switch2_usb *ns2_usb = container_of(work, struct switch2_usb, message_in_work);
+ struct switch2_urb *urb;
+ int err;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ns2_usb->bulk_in_lock, flags);
+ urb = &ns2_usb->bulk_in[ns2_usb->message_in];
+ spin_unlock_irqrestore(&ns2_usb->bulk_in_lock, flags);
+
+ err = switch2_receive_command(ns2_usb->cfg.parent, urb->urb->transfer_buffer,
+ urb->urb->actual_length);
+ if (err)
+ dev_dbg(&ns2_usb->udev->dev, "receive command failed: %d\n", err);
+
+ spin_lock_irqsave(&ns2_usb->bulk_in_lock, flags);
+ urb->active = false;
+ spin_unlock_irqrestore(&ns2_usb->bulk_in_lock, flags);
+}
+
+static int switch2_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct switch2_usb *ns2_usb;
+ struct usb_device *udev;
+ struct usb_endpoint_descriptor *bulk_in, *bulk_out;
+ char phys[64];
+ int ret;
+ int i;
+
+ udev = interface_to_usbdev(intf);
+ if (usb_make_path(udev, phys, sizeof(phys)) < 0)
+ return -EINVAL;
+
+ ret = usb_find_common_endpoints(intf->cur_altsetting, &bulk_in, &bulk_out, NULL, NULL);
+ if (ret) {
+ dev_err(&intf->dev, "failed to find bulk EPs\n");
+ return ret;
+ }
+
+ ns2_usb = devm_kzalloc(&intf->dev, sizeof(*ns2_usb), GFP_KERNEL);
+ if (!ns2_usb)
+ return -ENOMEM;
+
+ ns2_usb->udev = udev;
+ for (i = 0; i < NS2_IN_URBS; i++) {
+ ns2_usb->bulk_in[i].urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ns2_usb->bulk_in[i].urb) {
+ ret = -ENOMEM;
+ goto err_free_in;
+ }
+
+ ns2_usb->bulk_in[i].data = usb_alloc_coherent(udev, NS2_BULK_SIZE, GFP_KERNEL,
+ &ns2_usb->bulk_in[i].urb->transfer_dma);
+ if (!ns2_usb->bulk_in[i].data) {
+ ret = -ENOMEM;
+ goto err_free_in;
+ }
+
+ usb_fill_bulk_urb(ns2_usb->bulk_in[i].urb, udev,
+ usb_rcvbulkpipe(udev, bulk_in->bEndpointAddress),
+ ns2_usb->bulk_in[i].data, NS2_BULK_SIZE, switch2_bulk_in, ns2_usb);
+ ns2_usb->bulk_in[i].urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ }
+
+ for (i = 0; i < NS2_OUT_URBS; i++) {
+ ns2_usb->bulk_out[i].urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ns2_usb->bulk_out[i].urb) {
+ ret = -ENOMEM;
+ goto err_free_out;
+ }
+
+ ns2_usb->bulk_out[i].data = usb_alloc_coherent(udev, NS2_BULK_SIZE, GFP_KERNEL,
+ &ns2_usb->bulk_out[i].urb->transfer_dma);
+ if (!ns2_usb->bulk_out[i].data) {
+ ret = -ENOMEM;
+ goto err_free_out;
+ }
+
+ usb_fill_bulk_urb(ns2_usb->bulk_out[i].urb, udev,
+ usb_sndbulkpipe(udev, bulk_out->bEndpointAddress),
+ ns2_usb->bulk_out[i].data, NS2_BULK_SIZE, switch2_bulk_out, ns2_usb);
+ ns2_usb->bulk_out[i].urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ }
+
+ ns2_usb->bulk_in[0].active = true;
+ ret = usb_submit_urb(ns2_usb->bulk_in[0].urb, GFP_ATOMIC);
+ if (ret < 0)
+ goto err_free_out;
+
+ init_usb_anchor(&ns2_usb->bulk_out_anchor);
+ spin_lock_init(&ns2_usb->bulk_out_lock);
+ init_usb_anchor(&ns2_usb->bulk_in_anchor);
+ spin_lock_init(&ns2_usb->bulk_in_lock);
+ INIT_WORK(&ns2_usb->message_in_work, switch2_usb_message_in_work);
+
+ usb_set_intfdata(intf, ns2_usb);
+
+ ns2_usb->cfg.dev = &ns2_usb->udev->dev;
+ ns2_usb->cfg.send_command = switch2_usb_send_cmd;
+
+ ret = switch2_controller_attach_cfg(phys, &ns2_usb->cfg);
+ if (ret < 0)
+ goto err_kill_urb;
+
+ return 0;
+
+err_kill_urb:
+ usb_kill_urb(ns2_usb->bulk_in[0].urb);
+err_free_out:
+ for (i = 0; i < NS2_OUT_URBS; i++) {
+ usb_free_coherent(ns2_usb->udev, NS2_BULK_SIZE, ns2_usb->bulk_out[i].data,
+ ns2_usb->bulk_out[i].urb->transfer_dma);
+ usb_free_urb(ns2_usb->bulk_out[i].urb);
+ }
+err_free_in:
+ for (i = 0; i < NS2_IN_URBS; i++) {
+ usb_free_coherent(ns2_usb->udev, NS2_BULK_SIZE, ns2_usb->bulk_in[i].data,
+ ns2_usb->bulk_in[i].urb->transfer_dma);
+ usb_free_urb(ns2_usb->bulk_in[i].urb);
+ }
+ devm_kfree(&intf->dev, ns2_usb);
+
+ return ret;
+}
+
+static void switch2_usb_disconnect(struct usb_interface *intf)
+{
+ struct switch2_usb *ns2_usb = usb_get_intfdata(intf);
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&ns2_usb->bulk_out_lock, flags);
+ usb_kill_anchored_urbs(&ns2_usb->bulk_out_anchor);
+ for (i = 0; i < NS2_OUT_URBS; i++) {
+ usb_free_coherent(ns2_usb->udev, NS2_BULK_SIZE, ns2_usb->bulk_out[i].data,
+ ns2_usb->bulk_out[i].urb->transfer_dma);
+ usb_free_urb(ns2_usb->bulk_out[i].urb);
+ }
+ spin_unlock_irqrestore(&ns2_usb->bulk_out_lock, flags);
+
+ spin_lock_irqsave(&ns2_usb->bulk_in_lock, flags);
+ usb_kill_anchored_urbs(&ns2_usb->bulk_in_anchor);
+ cancel_work_sync(&ns2_usb->message_in_work);
+ for (i = 0; i < NS2_IN_URBS; i++) {
+ usb_free_coherent(ns2_usb->udev, NS2_BULK_SIZE, ns2_usb->bulk_in[i].data,
+ ns2_usb->bulk_in[i].urb->transfer_dma);
+ usb_free_urb(ns2_usb->bulk_in[i].urb);
+ }
+ spin_unlock_irqrestore(&ns2_usb->bulk_in_lock, flags);
+
+ switch2_controller_detach_cfg(ns2_usb->cfg.parent);
+}
+
+#define SWITCH2_CONTROLLER(vend, prod) \
+ USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_VENDOR_SPEC, 0, 0)
+
+static const struct usb_device_id switch2_usb_devices[] = {
+ { SWITCH2_CONTROLLER(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_NS2_JOYCONL) },
+ { SWITCH2_CONTROLLER(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_NS2_JOYCONR) },
+ { SWITCH2_CONTROLLER(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_NS2_PROCON) },
+ { SWITCH2_CONTROLLER(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_NS2_GCCON) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, switch2_usb_devices);
+
+static struct usb_driver switch2_usb = {
+ .name = "switch2",
+ .id_table = switch2_usb_devices,
+ .probe = switch2_usb_probe,
+ .disconnect = switch2_usb_disconnect,
+};
+module_usb_driver(switch2_usb);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vicki Pfau <vi@endrift.com>");
+MODULE_DESCRIPTION("Driver for Nintendo Switch 2 Controllers");
--
2.53.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox