* Re: [PATCH] Input: gameport: fm801-gp - Simplify initialisation of pci_device_id array
From: Dmitry Torokhov @ 2026-05-07 17:07 UTC (permalink / raw)
To: Uwe Kleine-König (The Capable Hub)
Cc: Kees Cook, linux-input, linux-kernel, Markus Schneider-Pargmann
In-Reply-To: <20260507160051.3315630-2-u.kleine-koenig@baylibre.com>
On Thu, May 07, 2026 at 06:00:51PM +0200, Uwe Kleine-König (The Capable Hub) wrote:
> Instead of assigning the pci_device_id members using a list (which is
> hard to read as you need to look at the order of the members in that
> struct in parallel) use the PCI_VDEVICE() convenience macro to compact
> the initialisation while improving readability.
>
> Also drop trailing zeros that the compiler will care about then.
>
> The change doesn't introduce binary changes to the compiled driver,
> verified on both ARCH=x86 and ARCH=arm64.
>
> Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Applied, thank you.
--
Dmitry
^ permalink raw reply
* Re: [PATCH] Input: ads7846 - consolidate coordinate filtering logic
From: Kris Bahnsen @ 2026-05-07 17:48 UTC (permalink / raw)
To: Dmitry Torokhov, linux-input
Cc: Aaro Koskinen, Mark Featherston, Marek Vasut, linux-kernel
In-Reply-To: <afl3WtbabMFNjE24@google.com>
Dmitry,
On 5/4/26 9:54 PM, Dmitry Torokhov wrote:
> The ads7846 driver has two separate filtering functions,
> ads7846_filter() and ads7846_filter_one(), for the full-duplex and
> half-duplex SPI paths, respectively.
>
> They can be consolidated by extracting the core filtering logic for a
> single command into a helper function, ads7846_filter_cmd(), which
> iterates from l->skip to l->count. The half-duplex setup function is
> updated to set l->skip = l->count - 1 so that the helper only processes
> the last sample, preserving the original half-duplex behavior.
>
> Assisted-by: Gemini:gemini-3.1-pro
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
>
> Not tested so will appreciate if someone could give it a spin.
Forgive my ignorance, but I am unsure of the base commit this applies
to and I'm unable to apply it to current HEAD of linux, linux-next,
or your input tree.
I also am not easily able to test this if it doesn't cleanly apply
to the latest LTS, but will do what I can once I know what other
patches I would need to pull in to our tree.
> drivers/input/touchscreen/ads7846.c | 74 +++++++++++++++--------------
> 1 file changed, 38 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
> index d3b529333ca2..093f4b56cc18 100644
> --- a/drivers/input/touchscreen/ads7846.c
> +++ b/drivers/input/touchscreen/ads7846.c
> @@ -759,52 +759,54 @@ static bool ads7846_cmd_need_settle(enum ads7846_cmds cmd_idx)
> return false;
> }
>
> -static int ads7846_filter(struct ads7846 *ts)
> +static int ads7846_filter_cmd(struct ads7846 *ts, unsigned int cmd_idx)
> {
> struct ads7846_packet *packet = ts->packet;
> - int action;
> - int val;
> - unsigned int cmd_idx, b;
> + struct ads7846_buf_layout *l = &packet->l[cmd_idx];
> + unsigned int b;
>
> - packet->ignore = false;
> - for (cmd_idx = packet->last_cmd_idx; cmd_idx < packet->cmds - 1; cmd_idx++) {
> - struct ads7846_buf_layout *l = &packet->l[cmd_idx];
> + for (b = l->skip; b < l->count; b++) {
> + int val = ads7846_get_value(&packet->rx[l->offset + b]);
>
> - packet->last_cmd_idx = cmd_idx;
> + switch (ts->filter(ts->filter_data, cmd_idx, &val)) {
> + case ADS7846_FILTER_REPEAT:
> + if (b == l->count - 1)
> + return -EAGAIN;
> + break;
>
> - for (b = l->skip; b < l->count; b++) {
> - val = ads7846_get_value(&packet->rx[l->offset + b]);
> -
> - action = ts->filter(ts->filter_data, cmd_idx, &val);
> - if (action == ADS7846_FILTER_REPEAT) {
> - if (b == l->count - 1)
> - return -EAGAIN;
> - } else if (action == ADS7846_FILTER_OK) {
> - ads7846_set_cmd_val(ts, cmd_idx, val);
> - break;
> - } else {
> - packet->ignore = true;
> - return 0;
> - }
> + case ADS7846_FILTER_OK:
> + ads7846_set_cmd_val(ts, cmd_idx, val);
> + return 0;
> +
> + case ADS7846_FILTER_IGNORE:
> + default:
> + return -EIO;
> }
> }
>
> - return 0;
> + return -EIO;
> }
>
> -static int ads7846_filter_one(struct ads7846 *ts, unsigned int cmd_idx)
> +static int ads7846_filter(struct ads7846 *ts)
> {
> struct ads7846_packet *packet = ts->packet;
> - struct ads7846_buf_layout *l = &packet->l[cmd_idx];
> - int action, val;
> -
> - val = ads7846_get_value(&packet->rx[l->offset + l->count - 1]);
> - action = ts->filter(ts->filter_data, cmd_idx, &val);
> - if (action == ADS7846_FILTER_REPEAT)
> - return -EAGAIN;
> - else if (action != ADS7846_FILTER_OK)
> - return -EIO;
> - ads7846_set_cmd_val(ts, cmd_idx, val);
> + unsigned int cmd_idx;
> + int error;
> +
> + packet->ignore = false;
> + for (cmd_idx = packet->last_cmd_idx; cmd_idx < packet->cmds - 1; cmd_idx++) {
> + packet->last_cmd_idx = cmd_idx;
> +
> + error = ads7846_filter_cmd(ts, cmd_idx);
> + if (error) {
> + if (error == -EAGAIN)
> + return -EAGAIN;
> +
> + packet->ignore = true;
> + return 0;
> + }
> + }
> +
> return 0;
> }
>
> @@ -857,7 +859,7 @@ static void ads7846_halfd_read_state(struct ads7846 *ts)
> if (msg_idx == ts->msg_count - 1)
> break;
>
> - error = ads7846_filter_one(ts, msg_idx);
> + error = ads7846_filter_cmd(ts, msg_idx);
> if (error == -EAGAIN) {
> continue;
> } else if (error) {
> @@ -1119,7 +1121,7 @@ static int ads7846_halfd_spi_msg(struct ads7846 *ts,
> l->offset = offset;
> offset += max_count;
> l->count = max_count;
> - l->skip = 0;
> + l->skip = max_count - 1;
> size += sizeof(*packet->rx) * max_count;
> }
>
--
Kris Bahnsen
Software Engineer
embeddedTS
^ permalink raw reply
* Re: [PATCH v4 2/2] Input: isa1200 - new driver for Imagis ISA1200
From: Dmitry Torokhov @ 2026-05-07 19:25 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij,
linux-input, devicetree, linux-kernel
In-Reply-To: <20260507133948.75704-3-clamor95@gmail.com>
Hi Svyatoslav,
On Thu, May 07, 2026 at 04:39:48PM +0300, Svyatoslav Ryhel wrote:
> From: Linus Walleij <linusw@kernel.org>
>
> The ISA1200 is a haptic feedback unit from Imagis Technology using two
> motors for haptic feedback in mobile phones. Used in many mobile devices
> c. 2012 including Samsung Galxy S Advance GT-I9070 (Janice), Samsung Beam
> GT-I8350 (Gavini), LG Optimus 4X P880 and LG Optimus Vu P895.
>
> The exact datasheet for the ISA1200 is not available; all data was modeled
> based on available downstream kernel sources for various devices and
> fragments of information scattered across the internet.
>
> Tested-by: Linus Walleij <linusw@kernel.org> # GT-I9070 Janice
> Signed-off-by: Linus Walleij <linusw@kernel.org>
> Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> drivers/input/misc/Kconfig | 12 +
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/isa1200.c | 540 +++++++++++++++++++++++++++++++++++
> 3 files changed, 553 insertions(+)
> create mode 100644 drivers/input/misc/isa1200.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 94a753fcb64f..52f192104ee2 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -852,6 +852,18 @@ config INPUT_IQS7222
> To compile this driver as a module, choose M here: the
> module will be called iqs7222.
>
> +config INPUT_ISA1200_HAPTIC
> + tristate "Imagis ISA1200 haptic feedback unit"
> + depends on I2C
> + select INPUT_FF_MEMLESS
> + select REGMAP_I2C
> + help
> + Say Y to enable support for the Imagis ISA1200 haptic
> + feedback unit.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called isa1200.
> +
> config INPUT_CMA3000
> tristate "VTI CMA3000 Tri-axis accelerometer"
> help
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 415fc4e2918b..d62bf2e9d85f 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
> obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o
> obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o
> obj-$(CONFIG_INPUT_IQS7222) += iqs7222.o
> +obj-$(CONFIG_INPUT_ISA1200_HAPTIC) += isa1200.o
> obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
> obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
> obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
> diff --git a/drivers/input/misc/isa1200.c b/drivers/input/misc/isa1200.c
> new file mode 100644
> index 000000000000..f8dba8a95c7d
> --- /dev/null
> +++ b/drivers/input/misc/isa1200.c
> @@ -0,0 +1,540 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +#include <linux/array_size.h>
> +#include <linux/bitmap.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/devm-helpers.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
> +#include <linux/pwm.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/units.h>
> +
> +/*
> + * System control (LDO regulator)
> + *
> + * LDO voltage to register mapping is linear, but it is split in two parts:
> + * 2.3V - 3.0V map to 0x08 - 0x0f; 3.1V - 3.8V map to 0x00 - 0x7
> + */
> +
> +#define ISA1200_SCTRL 0x00
> +#define ISA1200_LDO_VOLTAGE_BASE 0x08
> +#define ISA1200_LDO_VOLTAGE_STEP 100000
> +#define ISA1200_LDO_VOLTAGE_2V3 23
> +#define ISA1200_LDO_VOLTAGE_3V1 31
> +#define ISA1200_LDO_VOLTAGE_MIN 2300000
> +#define ISA1200_LDO_VOLTAGE_MAX 3800000
> +
> +/*
> + * The output frequency is calculated with this formula:
> + *
> + * base clock frequency
> + * fout = -----------------------------------------
> + * (128 - PWM_FREQ) * 2 * PLLDIV * PWM_PERIOD
> + *
> + * The base clock frequency is the clock frequency provided on the
> + * clock input to the chip, divided by the value in HCTRL0
> + *
> + * PWM_FREQ is configured in register HCTRL4, it is common to set this
> + * to 0 to get only two variables to calculate.
> + *
> + * PLLDIV is configured in register HCTRL3 (bits 7..4, so 0..15)
> + * PWM_PERIOD is configured in register HCTRL6
> + * Further the duty cycle can be configured in HCTRL5
> + */
> +
> +/*
> + * HCTRL0 configures clock or PWM input and selects the divider for
> + * the clock input.
> + */
> +#define ISA1200_HCTRL0 0x30
> +#define ISA1200_HCTRL0_HAP_ENABLE BIT(7)
> +#define ISA1200_HCTRL0_PWM_GEN_MODE BIT(4)
> +#define ISA1200_HCTRL0_PWM_INPUT_MODE BIT(3)
> +#define ISA1200_HCTRL0_CLKDIV_128 128
> +
> +/*
> + * HCTRL1 configures the motor type and clock sourse
> + */
> +#define ISA1200_HCTRL1 0x31
> +#define ISA1200_HCTRL1_EXT_CLOCK BIT(7)
> +#define ISA1200_HCTRL1_DAC_INVERT BIT(6)
> +#define ISA1200_HCTRL1_MODE(n) (((n) & 1) << 5)
I wonder if this should simply be BIT(5) and you conditionally use it in
the code. The macro is not really usable to disable the setting...
> +
> +/* HCTRL2 controls software reset of the chip */
> +#define ISA1200_HCTRL2 0x32
> +#define ISA1200_HCTRL2_SW_RESET BIT(0)
> +
> +/*
> + * HCTRL3 controls the PLL divisor
> + *
> + * Bits [0,1] are always set to 1 (we don't know what they are
> + * used for) and bit 4 and upward control the PLL divisor.
> + */
> +#define ISA1200_HCTRL3 0x33
> +#define ISA1200_HCTRL3_DEFAULT 0x03
> +#define ISA1200_HCTRL3_PLLDIV(n) (((n) & 0xf) << 4)
> +
> +/* HCTRL4 controls the PWM frequency of external channel */
> +#define ISA1200_HCTRL4 0x34
> +
> +/* HCTRL5 controls the PWM high duty cycle of internal channel */
> +#define ISA1200_HCTRL5 0x35
> +
> +/* HCTRL6 controls the PWM period of internal channel */
> +#define ISA1200_HCTRL6 0x36
> +#define ISA1200_HCTRL6_PERIOD_SCALE 100
> +
> +/* The use for these registers is unknown but they exist */
> +#define ISA1200_HCTRL7 0x37
> +#define ISA1200_HCTRL8 0x38
> +#define ISA1200_HCTRL9 0x39
> +#define ISA1200_HCTRLA 0x3a
> +#define ISA1200_HCTRLB 0x3b
> +#define ISA1200_HCTRLC 0x3c
> +#define ISA1200_HCTRLD 0x3d
> +
> +#define ISA1200_EN_PINS_MAX 2
> +
> +struct isa1200_config {
> + u32 ldo_voltage;
> + u32 mode;
> + u32 clkdiv;
> + u32 plldiv;
> + u32 freq;
> + u32 period;
> + u32 duty;
> +};
> +
> +struct isa1200 {
> + struct input_dev *input;
> + struct regmap *map;
> +
> + struct clk *clk;
> + struct pwm_device *pwm;
> + struct gpio_descs *enable_gpios;
> +
> + struct work_struct play_work;
> + struct isa1200_config config;
> +
> + int level;
> + bool clk_on;
I think you need not only clk_on, but general "active" flag that you
would set at the end of isa1200_start().
> +};
> +
> +static const struct regmap_config isa1200_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = ISA1200_HCTRLD,
> +};
> +
> +static void isa1200_start(struct isa1200 *isa)
> +{
> + struct isa1200_config *config = &isa->config;
> + struct pwm_state state;
> + u8 hctrl0 = 0, hctrl1 = 0;
> + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> + int ret;
Please use "error" or "err" for all variables that only hold error codes
(or 0) instead of a real value that is used for something.
> +
> + if (!isa->clk_on) {
> + ret = clk_prepare_enable(isa->clk);
This return 0 on success so
if (error)
return;
> + if (ret < 0)
> + return;
> +
> + isa->clk_on = true;
> + }
> +
> + bitmap_fill(values, ISA1200_EN_PINS_MAX);
> + gpiod_multi_set_value_cansleep(isa->enable_gpios, values);
> +
> + usleep_range(200, 300);
> +
> + regmap_write(isa->map, ISA1200_SCTRL, config->ldo_voltage);
> +
> + if (isa->clk) {
> + hctrl0 = ISA1200_HCTRL0_PWM_GEN_MODE;
> + hctrl1 = ISA1200_HCTRL1_EXT_CLOCK;
> + }
> +
> + if (isa->pwm) {
> + hctrl0 = ISA1200_HCTRL0_PWM_INPUT_MODE;
> + hctrl1 = 0;
> + }
> +
> + hctrl0 |= __ffs(config->clkdiv / ISA1200_HCTRL0_CLKDIV_128);
> + hctrl1 |= ISA1200_HCTRL1_DAC_INVERT;
> + hctrl1 |= ISA1200_HCTRL1_MODE(config->mode);
> +
> + regmap_write(isa->map, ISA1200_HCTRL0, hctrl0);
> + regmap_write(isa->map, ISA1200_HCTRL1, hctrl1);
> +
> + /* Make sure to de-assert software reset */
> + regmap_write(isa->map, ISA1200_HCTRL2, 0x00);
> +
> + /* PLL divisor */
> + regmap_write(isa->map, ISA1200_HCTRL3,
> + ISA1200_HCTRL3_PLLDIV(config->plldiv) |
> + ISA1200_HCTRL3_DEFAULT);
> +
> + /* Frequency */
> + regmap_write(isa->map, ISA1200_HCTRL4, config->freq);
> + /* Duty cycle */
> + regmap_write(isa->map, ISA1200_HCTRL5, config->period >> 1);
> + /* Period */
> + regmap_write(isa->map, ISA1200_HCTRL6, config->period);
> +
> + hctrl0 |= ISA1200_HCTRL0_HAP_ENABLE;
> + regmap_write(isa->map, ISA1200_HCTRL0, hctrl0);
> +
> + if (isa->clk)
> + regmap_write(isa->map, ISA1200_HCTRL5, config->duty);
> +
> + if (isa->pwm) {
> + pwm_get_state(isa->pwm, &state);
> + state.duty_cycle = config->duty;
> + state.enabled = true;
> + pwm_apply_might_sleep(isa->pwm, &state);
> + }
> +}
> +
> +static void isa1200_power_off(void *data)
> +{
> + struct isa1200 *isa = data;
> +
> + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> +
> + bitmap_zero(values, ISA1200_EN_PINS_MAX);
> + gpiod_multi_set_value_cansleep(isa->enable_gpios, values);
> +
> + if (isa->clk_on) {
> + clk_disable_unprepare(isa->clk);
> + isa->clk_on = false;
> + }
> +}
> +
> +static void isa1200_stop(struct isa1200 *isa)
> +{
> + struct pwm_state state;
> +
> + if (isa->pwm) {
> + pwm_get_state(isa->pwm, &state);
> + state.duty_cycle = 0;
> + state.enabled = false;
> + pwm_apply_might_sleep(isa->pwm, &state);
> + }
> +
> + regmap_write(isa->map, ISA1200_HCTRL0, 0x00);
> + isa1200_power_off(isa);
> +}
> +
> +static void isa1200_play_work(struct work_struct *work)
> +{
> + struct isa1200 *isa =
> + container_of(work, struct isa1200, play_work);
> +
> + guard(mutex)(&isa->input->mutex);
I think this mutex is dangerous here. You really want to stop/cancel
work in suspend() and close() instead of blocking on the mutex and then
continuing.
> +
> + if (isa->level)
> + isa1200_start(isa);
> + else
> + isa1200_stop(isa);
> +}
> +
> +static int isa1200_vibrator_play_effect(struct input_dev *input, void *data,
> + struct ff_effect *effect)
> +{
> + struct isa1200 *isa = input_get_drvdata(input);
> + int level;
> +
> + /*
> + * TODO: we currently only support rumble.
> + * The ISA1200 can control two motors and some devices
> + * also have two motors mounted.
> + */
> + level = effect->u.rumble.strong_magnitude;
> + if (!level)
> + level = effect->u.rumble.weak_magnitude;
> +
> + dev_dbg(&input->dev, "FF effect type %d level %d\n",
> + effect->type, level);
> +
> + if (isa->level != level) {
> + isa->level = level;
> + schedule_work(&isa->play_work);
> + }
> +
> + return 0;
> +}
> +
> +static void isa1200_vibrator_close(struct input_dev *input)
> +{
> + struct isa1200 *isa = input_get_drvdata(input);
> +
> + cancel_work_sync(&isa->play_work);
> +
> + if (isa->level)
So here I think you need to check that "active" flag that would represent
the committed state.
> + isa1200_stop(isa);
> +
> + isa->level = 0;
> +}
> +
> +static int isa1200_of_probe(struct i2c_client *client)
> +{
> + static const char * const isa1200_supplies[] = { "vdd", "vddp" };
> + struct isa1200 *isa = i2c_get_clientdata(client);
> + struct isa1200_config *config = &isa->config;
> + struct device *dev = &client->dev;
> + struct fwnode_handle *ldo_node;
> + int ret;
> +
> + isa->clk = devm_clk_get_optional(dev, NULL);
> + if (IS_ERR(isa->clk))
> + return dev_err_probe(dev, PTR_ERR(isa->clk),
> + "failed to get clock\n");
> +
> + isa->pwm = devm_pwm_get(dev, NULL);
> + if (IS_ERR(isa->pwm)) {
> + ret = PTR_ERR(isa->pwm);
> + if (ret == -ENODEV || ret == -EINVAL)
> + isa->pwm = NULL;
> + else
> + return dev_err_probe(dev, ret, "getting PWM\n");
> + }
> +
> + if (!isa->clk && !isa->pwm)
> + return dev_err_probe(dev, -EINVAL,
> + "clock or PWM are required, none were provided\n");
> +
> + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(isa1200_supplies),
> + isa1200_supplies);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to set up supplies\n");
> +
> + isa->enable_gpios = devm_gpiod_get_array_optional(dev, "control",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(isa->enable_gpios))
> + return dev_err_probe(dev, PTR_ERR(isa->enable_gpios),
> + "failed to get enable gpios\n");
> +
> + ldo_node = device_get_named_child_node(dev, "ldo");
> + if (!ldo_node)
> + return dev_err_probe(dev, -ENODEV,
> + "failed to get embedded LDO node\n");
> +
> + ret = fwnode_property_read_u32(ldo_node, "regulator-min-microvolt",
> + &config->ldo_voltage);
> + fwnode_handle_put(ldo_node);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to get ldo voltage\n");
> +
> + config->ldo_voltage = clamp(config->ldo_voltage,
> + ISA1200_LDO_VOLTAGE_MIN,
> + ISA1200_LDO_VOLTAGE_MAX);
> +
> + config->ldo_voltage /= ISA1200_LDO_VOLTAGE_STEP;
> + if (config->ldo_voltage < ISA1200_LDO_VOLTAGE_3V1)
> + config->ldo_voltage = config->ldo_voltage -
> + ISA1200_LDO_VOLTAGE_2V3 +
> + ISA1200_LDO_VOLTAGE_BASE;
> + else
> + config->ldo_voltage -= ISA1200_LDO_VOLTAGE_3V1;
> +
> + config->mode = 0; /* LRA_MODE */
> + device_property_read_u32(dev, "imagis,mode", &config->mode);
> +
> + config->clkdiv = ISA1200_HCTRL0_CLKDIV_128;
> + device_property_read_u32(dev, "imagis,clk-div", &config->clkdiv);
> + if (!config->clkdiv)
> + return dev_err_probe(dev, -EINVAL, "clk-div cannot be zero\n");
> +
> + config->clkdiv = clamp(config->clkdiv, ISA1200_HCTRL0_CLKDIV_128,
> + ISA1200_HCTRL0_CLKDIV_128 << 3);
> +
> + ret = device_property_read_u32(dev, "imagis,pll-div", &config->plldiv);
> + if (ret < 0 || !config->plldiv)
> + config->plldiv = 1;
> +
> + config->period = 0;
> + config->freq = 0;
> + config->duty = 0;
> +
> + if (isa->clk) {
> + ret = device_property_read_u32(dev, "imagis,period-ns",
> + &config->period);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to get period\n");
> +
> + /*
> + * TODO: The scale value is arbitrary, but it fits observations
> + * quite well, and the exact conversion method is unknown.
> + * The period property value returned above is the HCTRL6
> + * register value set by the vendor code, multiplied by 100.
> + */
> + config->period /= ISA1200_HCTRL6_PERIOD_SCALE;
> + config->duty = config->period >> 1;
> + }
> +
> + if (isa->pwm) {
> + struct pwm_state state;
> +
> + pwm_init_state(isa->pwm, &state);
> +
> + if (!state.period)
> + return dev_err_probe(dev, -EINVAL,
> + "PWM period cannot be zero\n");
> +
> + config->freq = div64_u64(NANO, state.period * config->clkdiv);
> + config->duty = state.period >> 1;
> +
> + ret = pwm_apply_might_sleep(isa->pwm, &state);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to apply initial PWM state\n");
> + }
> +
> + /*
> + * TODO: If device is using a clock, this property should return the
> + * value written to the HCTRL5 register by downstrem code. It likely
> + * needs to be converted into a meaningful duty cycle value, though
> + * unfortunately the exact conversion mechanism is unknown. If the
> + * device uses PWM, this property will return the correct duty cycle
> + * in nanoseconds.
> + */
> + device_property_read_u32(dev, "imagis,duty-cycle-ns", &config->duty);
> +
> + return 0;
> +}
> +
> +static int isa1200_probe(struct i2c_client *client)
> +{
> + struct isa1200 *isa;
> + struct device *dev = &client->dev;
> + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> + u32 val;
> + int ret;
> +
> + isa = devm_kzalloc(dev, sizeof(*isa), GFP_KERNEL);
> + if (!isa)
> + return -ENOMEM;
> +
> + isa->input = devm_input_allocate_device(dev);
> + if (!isa->input)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, isa);
> +
> + ret = isa1200_of_probe(client);
> + if (ret)
> + return ret;
> +
> + isa->map = devm_regmap_init_i2c(client, &isa1200_regmap_config);
> + if (IS_ERR(isa->map))
> + return dev_err_probe(dev, PTR_ERR(isa->map),
> + "failed to initialize register map\n");
> +
> + ret = clk_prepare_enable(isa->clk);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "failed to enable clock\n");
> +
> + isa->clk_on = true;
> +
> + bitmap_fill(values, ISA1200_EN_PINS_MAX);
> + gpiod_multi_set_value_cansleep(isa->enable_gpios, values);
You should factor our isa1200_power_on() from isa1200_start() and use it
here.
> +
> + ret = devm_add_action_or_reset(dev, isa1200_power_off, isa);
> + if (ret)
> + return ret;
close() is taking care of powering off the device.
> +
> + usleep_range(200, 300);
> +
> + /* Read a register so we know that regmap and I2C transport works */
> + ret = regmap_read(isa->map, ISA1200_SCTRL, &val);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to read SCTRL\n");
You should call isa1200_power_off() here. You do not know when the first
effect will play. In the meantime the device should be in low power
state.
> +
> + ret = devm_work_autocancel(dev, &isa->play_work, isa1200_play_work);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to init work\n");
I do not think you need it here. You supply input->close() and that
should take care of stopping/canceling the work. Input core guarantees
to call close() if the device is "open" whne unregistering.
> +
> + isa->input->name = "isa1200-haptic";
> + isa->input->id.bustype = BUS_HOST;
Not BUS_I2C?
> + isa->input->dev.parent = dev;
Parent is already set by devm_input_allocate_device().
> + isa->input->close = isa1200_vibrator_close;
> +
> + input_set_drvdata(isa->input, isa);
> +
> + /* TODO: this hardware can likely support more than rumble */
> + input_set_capability(isa->input, EV_FF, FF_RUMBLE);
> +
> + ret = input_ff_create_memless(isa->input, NULL,
> + isa1200_vibrator_play_effect);
> + if (ret)
> + return dev_err_probe(dev, ret, "couldn't create FF dev\n");
"failed ..."
> +
> + ret = input_register_device(isa->input);
> + if (ret)
> + return dev_err_probe(dev, ret, "couldn't register input dev\n");
"failed ..."
> +
> + return ret;
return 0;
> +}
> +
> +static int isa1200_suspend(struct device *dev)
> +{
> + struct isa1200 *isa = dev_get_drvdata(dev);
> +
> + cancel_work_sync(&isa->play_work);
Move it under input_device_enabled().
> +
> + guard(mutex)(&isa->input->mutex);
> +
> + if (input_device_enabled(isa->input))
> + if (isa->level)
> + isa1200_stop(isa);
> +
> + return 0;
> +}
> +
> +static int isa1200_resume(struct device *dev)
> +{
> + struct isa1200 *isa = dev_get_drvdata(dev);
> +
> + guard(mutex)(&isa->input->mutex);
> +
> + if (input_device_enabled(isa->input))
> + if (isa->level)
> + isa1200_start(isa);
> +
> + return 0;
> +}
> +
> +static DEFINE_SIMPLE_DEV_PM_OPS(isa1200_pm_ops, isa1200_suspend, isa1200_resume);
> +
> +static const struct of_device_id isa1200_of_match[] = {
> + { .compatible = "imagis,isa1200" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, isa1200_of_match);
> +
> +static struct i2c_driver isa1200_i2c_driver = {
> + .driver = {
> + .name = "isa1200",
> + .of_match_table = isa1200_of_match,
> + .pm = pm_sleep_ptr(&isa1200_pm_ops),
> + },
> + .probe = isa1200_probe,
> +};
> +module_i2c_driver(isa1200_i2c_driver);
> +
> +MODULE_AUTHOR("Linus Walleij <linusw@kernel.org>");
> +MODULE_AUTHOR("Svyatoslav Ryhel <clamor95@gmail.com>");
> +MODULE_DESCRIPTION("Imagis ISA1200 haptic feedback unit");
> +MODULE_LICENSE("GPL");
Thanks.
--
Dmitry
^ permalink raw reply
* Re: [PATCH] Input: ads7846 - consolidate coordinate filtering logic
From: Dmitry Torokhov @ 2026-05-07 19:35 UTC (permalink / raw)
To: Kris Bahnsen
Cc: linux-input, Aaro Koskinen, Mark Featherston, Marek Vasut,
linux-kernel
In-Reply-To: <cf9e30d8-f51b-4a19-ae7d-914e6bccb265@embeddedTS.com>
Hi Kris,
On Thu, May 07, 2026 at 10:48:57AM -0700, Kris Bahnsen wrote:
> On 5/4/26 9:54 PM, Dmitry Torokhov wrote:
> > The ads7846 driver has two separate filtering functions,
> > ads7846_filter() and ads7846_filter_one(), for the full-duplex and
> > half-duplex SPI paths, respectively.
> >
> > They can be consolidated by extracting the core filtering logic for a
> > single command into a helper function, ads7846_filter_cmd(), which
> > iterates from l->skip to l->count. The half-duplex setup function is
> > updated to set l->skip = l->count - 1 so that the helper only processes
> > the last sample, preserving the original half-duplex behavior.
> >
> > Assisted-by: Gemini:gemini-3.1-pro
> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> > ---
> >
> > Not tested so will appreciate if someone could give it a spin.
>
> Forgive my ignorance, but I am unsure of the base commit this applies
> to and I'm unable to apply it to current HEAD of linux, linux-next,
> or your input tree.
>
> I also am not easily able to test this if it doesn't cleanly apply
> to the latest LTS, but will do what I can once I know what other
> patches I would need to pull in to our tree.
I think if you pull 'next' branch of my tree, then the following patches
seem to apply cleanly on 7.0:
c68bc840f06c ("Input: ads7846 - restore half-duplex support")
011bdf9f3a9d ("Input: ads7846 - consolidate coordinate filtering logic")
I hope they also build ;)
c68bc840f06c should appear in linux-next soon too.
Thanks.
--
Dmitry
^ permalink raw reply
* Re: (subset) [PATCH v4 0/4] Add support for Awinic AW86938 haptic driver
From: Bjorn Andersson @ 2026-05-07 20:34 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Konrad Dybcio, Luca Weiss, Griffin Kroah-Hartman
Cc: linux-input, devicetree, linux-kernel, linux-arm-msm,
Krzysztof Kozlowski, Dmitry Baryshkov, Konrad Dybcio
In-Reply-To: <20260302-aw86938-driver-v4-0-92c865df9cca@fairphone.com>
On Mon, 02 Mar 2026 11:50:24 +0100, Griffin Kroah-Hartman wrote:
> Add devicetree bindings and driver support for the AW86938 haptic driver
> chip, and add it to the devicetree for the Fairphone (Gen. 6) smartphone.
>
> This haptics chip is quite similar to the AW86927, and shares many core
> features but has some notable differences, including some extra
> features.
>
> [...]
Applied, thanks!
[4/4] arm64: dts: qcom: milos-fairphone-fp6: Add vibrator support
commit: 66fb209e6035ed90cbff71c48c60124803da5c63
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply
* [PATCH 0/3] HID: sony: more cleanup
From: Rosalie Wanders @ 2026-05-08 4:51 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires
Cc: linux-input, linux-kernel, Rosalie Wanders
This series cleans up hid-sony by utilizing modern helper functions.
This series depends on the following patches:
- HID: sony: use input_dev from sc struct in sony_init_ff()
- HID: sony: use dedicated raw_event() handlers in sony_raw_event()
Rosalie Wanders (3):
HID: sony: use guard() and scoped_guard()
HID: sony: remove unneeded which argument from sony_schedule_work()
HID: sony: use devm_kasprintf()
drivers/hid/hid-sony.c | 100 +++++++++++++++--------------------------
1 file changed, 36 insertions(+), 64 deletions(-)
--
2.54.0
^ permalink raw reply
* [PATCH 1/3] HID: sony: use guard() and scoped_guard()
From: Rosalie Wanders @ 2026-05-08 4:51 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires
Cc: linux-input, linux-kernel, Rosalie Wanders
In-Reply-To: <20260508045111.495032-1-rosalie@mailbox.org>
This replaces the spin_lock_irqsave() and spin_unlock_irqrestore() calls
with the RAII guard() and scoped_guard().
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
---
drivers/hid/hid-sony.c | 62 ++++++++++++++++++------------------------
1 file changed, 26 insertions(+), 36 deletions(-)
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 2d9a5261b63f..84df55c3cbe1 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -29,6 +29,7 @@
* There will be no PIN request from the device.
*/
+#include <linux/cleanup.h>
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
@@ -571,14 +572,12 @@ static void sony_set_leds(struct sony_sc *sc);
static inline void sony_schedule_work(struct sony_sc *sc,
enum sony_worker which)
{
- unsigned long flags;
-
switch (which) {
case SONY_WORKER_STATE:
- spin_lock_irqsave(&sc->lock, flags);
- if (!sc->defer_initialization && sc->state_worker_initialized)
- schedule_work(&sc->state_worker);
- spin_unlock_irqrestore(&sc->lock, flags);
+ scoped_guard(spinlock_irqsave, &sc->lock) {
+ if (!sc->defer_initialization && sc->state_worker_initialized)
+ schedule_work(&sc->state_worker);
+ }
break;
}
}
@@ -951,7 +950,6 @@ static const u8 *sony_report_fixup(struct hid_device *hdev, u8 *rdesc,
static int sixaxis_raw_event(struct sony_sc *sc, u8 *rd, int size)
{
static const u8 sixaxis_battery_capacity[] = { 0, 1, 25, 50, 75, 100 };
- unsigned long flags;
int offset;
u8 index;
u8 battery_capacity;
@@ -999,10 +997,10 @@ static int sixaxis_raw_event(struct sony_sc *sc, u8 *rd, int size)
battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
}
- spin_lock_irqsave(&sc->lock, flags);
- sc->battery_capacity = battery_capacity;
- sc->battery_status = battery_status;
- spin_unlock_irqrestore(&sc->lock, flags);
+ scoped_guard(spinlock_irqsave, &sc->lock) {
+ sc->battery_capacity = battery_capacity;
+ sc->battery_status = battery_status;
+ }
if (sc->quirks & SIXAXIS_CONTROLLER) {
int val;
@@ -1148,7 +1146,6 @@ static int rb4_ps5_guitar_raw_event(struct sony_sc *sc, u8 *rd, int size)
u8 battery_data;
u8 battery_capacity;
u8 battery_status;
- unsigned long flags;
if (unlikely(size != 64 || rd[0] != 0x01))
return 0;
@@ -1191,10 +1188,10 @@ static int rb4_ps5_guitar_raw_event(struct sony_sc *sc, u8 *rd, int size)
break;
}
- spin_lock_irqsave(&sc->lock, flags);
- sc->battery_capacity = battery_capacity;
- sc->battery_status = battery_status;
- spin_unlock_irqrestore(&sc->lock, flags);
+ scoped_guard(spinlock_irqsave, &sc->lock) {
+ sc->battery_capacity = battery_capacity;
+ sc->battery_status = battery_status;
+ }
input_sync(sc->input_dev);
return 0;
@@ -1885,15 +1882,14 @@ static int sony_battery_get_property(struct power_supply *psy,
union power_supply_propval *val)
{
struct sony_sc *sc = power_supply_get_drvdata(psy);
- unsigned long flags;
int ret = 0;
u8 battery_capacity;
int battery_status;
- spin_lock_irqsave(&sc->lock, flags);
- battery_capacity = sc->battery_capacity;
- battery_status = sc->battery_status;
- spin_unlock_irqrestore(&sc->lock, flags);
+ scoped_guard(spinlock_irqsave, &sc->lock) {
+ battery_capacity = sc->battery_capacity;
+ battery_status = sc->battery_status;
+ }
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
@@ -1975,10 +1971,9 @@ static inline int sony_compare_connection_type(struct sony_sc *sc0,
static int sony_check_add_dev_list(struct sony_sc *sc)
{
struct sony_sc *entry;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&sony_dev_list_lock, flags);
+ guard(spinlock_irqsave)(&sony_dev_list_lock);
list_for_each_entry(entry, &sony_device_list, list_node) {
ret = memcmp(sc->mac_address, entry->mac_address,
@@ -1992,26 +1987,23 @@ static int sony_check_add_dev_list(struct sony_sc *sc)
"controller with MAC address %pMR already connected\n",
sc->mac_address);
}
- goto unlock;
+ goto out;
}
}
ret = 0;
list_add(&(sc->list_node), &sony_device_list);
-unlock:
- spin_unlock_irqrestore(&sony_dev_list_lock, flags);
+out:
return ret;
}
static void sony_remove_dev_list(struct sony_sc *sc)
{
- unsigned long flags;
-
if (sc->list_node.next) {
- spin_lock_irqsave(&sony_dev_list_lock, flags);
- list_del(&(sc->list_node));
- spin_unlock_irqrestore(&sony_dev_list_lock, flags);
+ scoped_guard(spinlock_irqsave, &sony_dev_list_lock) {
+ list_del(&(sc->list_node));
+ }
}
}
@@ -2145,12 +2137,10 @@ static inline void sony_init_output_report(struct sony_sc *sc,
static inline void sony_cancel_work_sync(struct sony_sc *sc)
{
- unsigned long flags;
-
if (sc->state_worker_initialized) {
- spin_lock_irqsave(&sc->lock, flags);
- sc->state_worker_initialized = 0;
- spin_unlock_irqrestore(&sc->lock, flags);
+ scoped_guard(spinlock_irqsave, &sc->lock) {
+ sc->state_worker_initialized = 0;
+ }
cancel_work_sync(&sc->state_worker);
}
}
--
2.54.0
^ permalink raw reply related
* [PATCH 2/3] HID: sony: remove unneeded which argument from sony_schedule_work()
From: Rosalie Wanders @ 2026-05-08 4:51 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires
Cc: linux-input, linux-kernel, Rosalie Wanders
In-Reply-To: <20260508045111.495032-1-rosalie@mailbox.org>
The sony_worker enum only had a single member, so removing it simplifies
sony_schedule_work().
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
---
drivers/hid/hid-sony.c | 26 ++++++++------------------
1 file changed, 8 insertions(+), 18 deletions(-)
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 84df55c3cbe1..ff681ebc76ce 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -523,10 +523,6 @@ static DEFINE_SPINLOCK(sony_dev_list_lock);
static LIST_HEAD(sony_device_list);
static DEFINE_IDA(sony_device_id_allocator);
-enum sony_worker {
- SONY_WORKER_STATE
-};
-
struct sony_sc {
spinlock_t lock;
struct list_head list_node;
@@ -569,17 +565,11 @@ struct sony_sc {
static void sony_set_leds(struct sony_sc *sc);
-static inline void sony_schedule_work(struct sony_sc *sc,
- enum sony_worker which)
+static inline void sony_schedule_work(struct sony_sc *sc)
{
- switch (which) {
- case SONY_WORKER_STATE:
- scoped_guard(spinlock_irqsave, &sc->lock) {
- if (!sc->defer_initialization && sc->state_worker_initialized)
- schedule_work(&sc->state_worker);
- }
- break;
- }
+ guard(spinlock_irqsave)(&sc->lock);
+ if (!sc->defer_initialization && sc->state_worker_initialized)
+ schedule_work(&sc->state_worker);
}
static void ghl_magic_poke_cb(struct urb *urb)
@@ -1211,7 +1201,7 @@ static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
if (unlikely(sc->defer_initialization)) {
sc->defer_initialization = 0;
- sony_schedule_work(sc, SONY_WORKER_STATE);
+ sony_schedule_work(sc);
}
return 0;
@@ -1520,7 +1510,7 @@ static void buzz_set_leds(struct sony_sc *sc)
static void sony_set_leds(struct sony_sc *sc)
{
if (!(sc->quirks & BUZZ_CONTROLLER))
- sony_schedule_work(sc, SONY_WORKER_STATE);
+ sony_schedule_work(sc);
else
buzz_set_leds(sc);
}
@@ -1631,7 +1621,7 @@ static int sony_led_blink_set(struct led_classdev *led, unsigned long *delay_on,
new_off != drv_data->led_delay_off[n]) {
drv_data->led_delay_on[n] = new_on;
drv_data->led_delay_off[n] = new_off;
- sony_schedule_work(drv_data, SONY_WORKER_STATE);
+ sony_schedule_work(drv_data);
}
return 0;
@@ -1859,7 +1849,7 @@ static int sony_play_effect(struct input_dev *dev, void *data,
sc->left = effect->u.rumble.strong_magnitude / 256;
sc->right = effect->u.rumble.weak_magnitude / 256;
- sony_schedule_work(sc, SONY_WORKER_STATE);
+ sony_schedule_work(sc);
return 0;
}
--
2.54.0
^ permalink raw reply related
* [PATCH 3/3] HID: sony: use devm_kasprintf()
From: Rosalie Wanders @ 2026-05-08 4:51 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires
Cc: linux-input, linux-kernel, Rosalie Wanders
In-Reply-To: <20260508045111.495032-1-rosalie@mailbox.org>
Using devm_kasprintf() makes the code less error-prone.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
---
drivers/hid/hid-sony.c | 20 ++++++--------------
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index ff681ebc76ce..253fff4066eb 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -1272,8 +1272,6 @@ static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
int w, int h, int touch_major, int touch_minor, int orientation)
{
- size_t name_sz;
- char *name;
int ret;
sc->touchpad = devm_input_allocate_device(&sc->hdev->dev);
@@ -1295,12 +1293,10 @@ static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
* a suffix. Other devices which were added later like Sony TV remotes
* inhirited this suffix.
*/
- name_sz = strlen(sc->hdev->name) + sizeof(TOUCHPAD_SUFFIX);
- name = devm_kzalloc(&sc->hdev->dev, name_sz, GFP_KERNEL);
- if (!name)
+ sc->touchpad->name = devm_kasprintf(&sc->hdev->dev, GFP_KERNEL, "%s" TOUCHPAD_SUFFIX,
+ sc->hdev->name);
+ if (!sc->touchpad->name)
return -ENOMEM;
- snprintf(name, name_sz, "%s" TOUCHPAD_SUFFIX, sc->hdev->name);
- sc->touchpad->name = name;
/* We map the button underneath the touchpad to BTN_LEFT. */
__set_bit(EV_KEY, sc->touchpad->evbit);
@@ -1337,8 +1333,6 @@ static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
static int sony_register_sensors(struct sony_sc *sc)
{
- size_t name_sz;
- char *name;
int ret;
sc->sensor_dev = devm_input_allocate_device(&sc->hdev->dev);
@@ -1357,12 +1351,10 @@ static int sony_register_sensors(struct sony_sc *sc)
/* Append a suffix to the controller name as there are various
* DS4 compatible non-Sony devices with different names.
*/
- name_sz = strlen(sc->hdev->name) + sizeof(SENSOR_SUFFIX);
- name = devm_kzalloc(&sc->hdev->dev, name_sz, GFP_KERNEL);
- if (!name)
+ sc->sensor_dev->name = devm_kasprintf(&sc->hdev->dev, GFP_KERNEL, "%s" SENSOR_SUFFIX,
+ sc->hdev->name);
+ if (!sc->sensor_dev->name)
return -ENOMEM;
- snprintf(name, name_sz, "%s" SENSOR_SUFFIX, sc->hdev->name);
- sc->sensor_dev->name = name;
if (sc->quirks & SIXAXIS_CONTROLLER) {
/* For the DS3 we only support the accelerometer, which works
--
2.54.0
^ permalink raw reply related
* Re: [PATCH v4 2/2] Input: isa1200 - new driver for Imagis ISA1200
From: Svyatoslav Ryhel @ 2026-05-08 5:30 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij,
linux-input, devicetree, linux-kernel
In-Reply-To: <afzJUcvQth6v9KGC@google.com>
чт, 7 трав. 2026 р. о 22:26 Dmitry Torokhov <dmitry.torokhov@gmail.com> пише:
>
> Hi Svyatoslav,
>
> On Thu, May 07, 2026 at 04:39:48PM +0300, Svyatoslav Ryhel wrote:
> > From: Linus Walleij <linusw@kernel.org>
> >
> > The ISA1200 is a haptic feedback unit from Imagis Technology using two
> > motors for haptic feedback in mobile phones. Used in many mobile devices
> > c. 2012 including Samsung Galxy S Advance GT-I9070 (Janice), Samsung Beam
> > GT-I8350 (Gavini), LG Optimus 4X P880 and LG Optimus Vu P895.
> >
> > The exact datasheet for the ISA1200 is not available; all data was modeled
> > based on available downstream kernel sources for various devices and
> > fragments of information scattered across the internet.
> >
> > Tested-by: Linus Walleij <linusw@kernel.org> # GT-I9070 Janice
> > Signed-off-by: Linus Walleij <linusw@kernel.org>
> > Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > ---
> > drivers/input/misc/Kconfig | 12 +
> > drivers/input/misc/Makefile | 1 +
> > drivers/input/misc/isa1200.c | 540 +++++++++++++++++++++++++++++++++++
> > 3 files changed, 553 insertions(+)
> > create mode 100644 drivers/input/misc/isa1200.c
> >
> > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > index 94a753fcb64f..52f192104ee2 100644
> > --- a/drivers/input/misc/Kconfig
> > +++ b/drivers/input/misc/Kconfig
> > @@ -852,6 +852,18 @@ config INPUT_IQS7222
> > To compile this driver as a module, choose M here: the
> > module will be called iqs7222.
> >
> > +config INPUT_ISA1200_HAPTIC
> > + tristate "Imagis ISA1200 haptic feedback unit"
> > + depends on I2C
> > + select INPUT_FF_MEMLESS
> > + select REGMAP_I2C
> > + help
> > + Say Y to enable support for the Imagis ISA1200 haptic
> > + feedback unit.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called isa1200.
> > +
> > config INPUT_CMA3000
> > tristate "VTI CMA3000 Tri-axis accelerometer"
> > help
> > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> > index 415fc4e2918b..d62bf2e9d85f 100644
> > --- a/drivers/input/misc/Makefile
> > +++ b/drivers/input/misc/Makefile
> > @@ -49,6 +49,7 @@ obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
> > obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o
> > obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o
> > obj-$(CONFIG_INPUT_IQS7222) += iqs7222.o
> > +obj-$(CONFIG_INPUT_ISA1200_HAPTIC) += isa1200.o
> > obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
> > obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
> > obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
> > diff --git a/drivers/input/misc/isa1200.c b/drivers/input/misc/isa1200.c
> > new file mode 100644
> > index 000000000000..f8dba8a95c7d
> > --- /dev/null
> > +++ b/drivers/input/misc/isa1200.c
> > @@ -0,0 +1,540 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +
> > +#include <linux/array_size.h>
> > +#include <linux/bitmap.h>
> > +#include <linux/bits.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/devm-helpers.h>
> > +#include <linux/err.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/input.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/property.h>
> > +#include <linux/pwm.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/units.h>
> > +
> > +/*
> > + * System control (LDO regulator)
> > + *
> > + * LDO voltage to register mapping is linear, but it is split in two parts:
> > + * 2.3V - 3.0V map to 0x08 - 0x0f; 3.1V - 3.8V map to 0x00 - 0x7
> > + */
> > +
> > +#define ISA1200_SCTRL 0x00
> > +#define ISA1200_LDO_VOLTAGE_BASE 0x08
> > +#define ISA1200_LDO_VOLTAGE_STEP 100000
> > +#define ISA1200_LDO_VOLTAGE_2V3 23
> > +#define ISA1200_LDO_VOLTAGE_3V1 31
> > +#define ISA1200_LDO_VOLTAGE_MIN 2300000
> > +#define ISA1200_LDO_VOLTAGE_MAX 3800000
> > +
> > +/*
> > + * The output frequency is calculated with this formula:
> > + *
> > + * base clock frequency
> > + * fout = -----------------------------------------
> > + * (128 - PWM_FREQ) * 2 * PLLDIV * PWM_PERIOD
> > + *
> > + * The base clock frequency is the clock frequency provided on the
> > + * clock input to the chip, divided by the value in HCTRL0
> > + *
> > + * PWM_FREQ is configured in register HCTRL4, it is common to set this
> > + * to 0 to get only two variables to calculate.
> > + *
> > + * PLLDIV is configured in register HCTRL3 (bits 7..4, so 0..15)
> > + * PWM_PERIOD is configured in register HCTRL6
> > + * Further the duty cycle can be configured in HCTRL5
> > + */
> > +
> > +/*
> > + * HCTRL0 configures clock or PWM input and selects the divider for
> > + * the clock input.
> > + */
> > +#define ISA1200_HCTRL0 0x30
> > +#define ISA1200_HCTRL0_HAP_ENABLE BIT(7)
> > +#define ISA1200_HCTRL0_PWM_GEN_MODE BIT(4)
> > +#define ISA1200_HCTRL0_PWM_INPUT_MODE BIT(3)
> > +#define ISA1200_HCTRL0_CLKDIV_128 128
> > +
> > +/*
> > + * HCTRL1 configures the motor type and clock sourse
> > + */
> > +#define ISA1200_HCTRL1 0x31
> > +#define ISA1200_HCTRL1_EXT_CLOCK BIT(7)
> > +#define ISA1200_HCTRL1_DAC_INVERT BIT(6)
> > +#define ISA1200_HCTRL1_MODE(n) (((n) & 1) << 5)
>
> I wonder if this should simply be BIT(5) and you conditionally use it in
> the code. The macro is not really usable to disable the setting...
>
That was the initial idea but mode is not boolean it is an enum and
macro fits better to handle enum. Code does not enable/disable this
field, this field is configured with every start call.
> > +
> > +/* HCTRL2 controls software reset of the chip */
> > +#define ISA1200_HCTRL2 0x32
> > +#define ISA1200_HCTRL2_SW_RESET BIT(0)
> > +
> > +/*
> > + * HCTRL3 controls the PLL divisor
> > + *
> > + * Bits [0,1] are always set to 1 (we don't know what they are
> > + * used for) and bit 4 and upward control the PLL divisor.
> > + */
> > +#define ISA1200_HCTRL3 0x33
> > +#define ISA1200_HCTRL3_DEFAULT 0x03
> > +#define ISA1200_HCTRL3_PLLDIV(n) (((n) & 0xf) << 4)
> > +
> > +/* HCTRL4 controls the PWM frequency of external channel */
> > +#define ISA1200_HCTRL4 0x34
> > +
> > +/* HCTRL5 controls the PWM high duty cycle of internal channel */
> > +#define ISA1200_HCTRL5 0x35
> > +
> > +/* HCTRL6 controls the PWM period of internal channel */
> > +#define ISA1200_HCTRL6 0x36
> > +#define ISA1200_HCTRL6_PERIOD_SCALE 100
> > +
> > +/* The use for these registers is unknown but they exist */
> > +#define ISA1200_HCTRL7 0x37
> > +#define ISA1200_HCTRL8 0x38
> > +#define ISA1200_HCTRL9 0x39
> > +#define ISA1200_HCTRLA 0x3a
> > +#define ISA1200_HCTRLB 0x3b
> > +#define ISA1200_HCTRLC 0x3c
> > +#define ISA1200_HCTRLD 0x3d
> > +
> > +#define ISA1200_EN_PINS_MAX 2
> > +
> > +struct isa1200_config {
> > + u32 ldo_voltage;
> > + u32 mode;
> > + u32 clkdiv;
> > + u32 plldiv;
> > + u32 freq;
> > + u32 period;
> > + u32 duty;
> > +};
> > +
> > +struct isa1200 {
> > + struct input_dev *input;
> > + struct regmap *map;
> > +
> > + struct clk *clk;
> > + struct pwm_device *pwm;
> > + struct gpio_descs *enable_gpios;
> > +
> > + struct work_struct play_work;
> > + struct isa1200_config config;
> > +
> > + int level;
> > + bool clk_on;
>
> I think you need not only clk_on, but general "active" flag that you
> would set at the end of isa1200_start().
>
Acknowledged.
> > +};
> > +
> > +static const struct regmap_config isa1200_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + .max_register = ISA1200_HCTRLD,
> > +};
> > +
> > +static void isa1200_start(struct isa1200 *isa)
> > +{
> > + struct isa1200_config *config = &isa->config;
> > + struct pwm_state state;
> > + u8 hctrl0 = 0, hctrl1 = 0;
> > + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> > + int ret;
>
> Please use "error" or "err" for all variables that only hold error codes
> (or 0) instead of a real value that is used for something.
>
Not real value, but return value. Why I cannot use ret aka return
value? It is much more versatile since it can hold any function return
value including errors.
> > +
> > + if (!isa->clk_on) {
> > + ret = clk_prepare_enable(isa->clk);
>
> This return 0 on success so
>
> if (error)
> return;
>
No, code is correct. If clock enable fails, further function execution
should stop since regmap operations on unconfigured device is not
desirable. Since this function is void using general "active" flag as
you suggested to indicate that start reached end would be beneficial.
> > + if (ret < 0)
> > + return;
> > +
> > + isa->clk_on = true;
> > + }
> > +
> > + bitmap_fill(values, ISA1200_EN_PINS_MAX);
> > + gpiod_multi_set_value_cansleep(isa->enable_gpios, values);
> > +
> > + usleep_range(200, 300);
> > +
> > + regmap_write(isa->map, ISA1200_SCTRL, config->ldo_voltage);
> > +
> > + if (isa->clk) {
> > + hctrl0 = ISA1200_HCTRL0_PWM_GEN_MODE;
> > + hctrl1 = ISA1200_HCTRL1_EXT_CLOCK;
> > + }
> > +
> > + if (isa->pwm) {
> > + hctrl0 = ISA1200_HCTRL0_PWM_INPUT_MODE;
> > + hctrl1 = 0;
> > + }
> > +
> > + hctrl0 |= __ffs(config->clkdiv / ISA1200_HCTRL0_CLKDIV_128);
> > + hctrl1 |= ISA1200_HCTRL1_DAC_INVERT;
> > + hctrl1 |= ISA1200_HCTRL1_MODE(config->mode);
> > +
> > + regmap_write(isa->map, ISA1200_HCTRL0, hctrl0);
> > + regmap_write(isa->map, ISA1200_HCTRL1, hctrl1);
> > +
> > + /* Make sure to de-assert software reset */
> > + regmap_write(isa->map, ISA1200_HCTRL2, 0x00);
> > +
> > + /* PLL divisor */
> > + regmap_write(isa->map, ISA1200_HCTRL3,
> > + ISA1200_HCTRL3_PLLDIV(config->plldiv) |
> > + ISA1200_HCTRL3_DEFAULT);
> > +
> > + /* Frequency */
> > + regmap_write(isa->map, ISA1200_HCTRL4, config->freq);
> > + /* Duty cycle */
> > + regmap_write(isa->map, ISA1200_HCTRL5, config->period >> 1);
> > + /* Period */
> > + regmap_write(isa->map, ISA1200_HCTRL6, config->period);
> > +
> > + hctrl0 |= ISA1200_HCTRL0_HAP_ENABLE;
> > + regmap_write(isa->map, ISA1200_HCTRL0, hctrl0);
> > +
> > + if (isa->clk)
> > + regmap_write(isa->map, ISA1200_HCTRL5, config->duty);
> > +
> > + if (isa->pwm) {
> > + pwm_get_state(isa->pwm, &state);
> > + state.duty_cycle = config->duty;
> > + state.enabled = true;
> > + pwm_apply_might_sleep(isa->pwm, &state);
> > + }
> > +}
> > +
> > +static void isa1200_power_off(void *data)
> > +{
> > + struct isa1200 *isa = data;
> > +
> > + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> > +
> > + bitmap_zero(values, ISA1200_EN_PINS_MAX);
> > + gpiod_multi_set_value_cansleep(isa->enable_gpios, values);
> > +
> > + if (isa->clk_on) {
> > + clk_disable_unprepare(isa->clk);
> > + isa->clk_on = false;
> > + }
> > +}
> > +
> > +static void isa1200_stop(struct isa1200 *isa)
> > +{
> > + struct pwm_state state;
> > +
> > + if (isa->pwm) {
> > + pwm_get_state(isa->pwm, &state);
> > + state.duty_cycle = 0;
> > + state.enabled = false;
> > + pwm_apply_might_sleep(isa->pwm, &state);
> > + }
> > +
> > + regmap_write(isa->map, ISA1200_HCTRL0, 0x00);
> > + isa1200_power_off(isa);
> > +}
> > +
> > +static void isa1200_play_work(struct work_struct *work)
> > +{
> > + struct isa1200 *isa =
> > + container_of(work, struct isa1200, play_work);
> > +
> > + guard(mutex)(&isa->input->mutex);
>
> I think this mutex is dangerous here. You really want to stop/cancel
> work in suspend() and close() instead of blocking on the mutex and then
> continuing.
>
This is controversial solution, I do agree.
> > +
> > + if (isa->level)
> > + isa1200_start(isa);
> > + else
> > + isa1200_stop(isa);
> > +}
> > +
> > +static int isa1200_vibrator_play_effect(struct input_dev *input, void *data,
> > + struct ff_effect *effect)
> > +{
> > + struct isa1200 *isa = input_get_drvdata(input);
> > + int level;
> > +
> > + /*
> > + * TODO: we currently only support rumble.
> > + * The ISA1200 can control two motors and some devices
> > + * also have two motors mounted.
> > + */
> > + level = effect->u.rumble.strong_magnitude;
> > + if (!level)
> > + level = effect->u.rumble.weak_magnitude;
> > +
> > + dev_dbg(&input->dev, "FF effect type %d level %d\n",
> > + effect->type, level);
> > +
> > + if (isa->level != level) {
> > + isa->level = level;
> > + schedule_work(&isa->play_work);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void isa1200_vibrator_close(struct input_dev *input)
> > +{
> > + struct isa1200 *isa = input_get_drvdata(input);
> > +
> > + cancel_work_sync(&isa->play_work);
> > +
> > + if (isa->level)
>
> So here I think you need to check that "active" flag that would represent
> the committed state.
>
Yes, acknowledged.
> > + isa1200_stop(isa);
> > +
> > + isa->level = 0;
> > +}
> > +
> > +static int isa1200_of_probe(struct i2c_client *client)
> > +{
> > + static const char * const isa1200_supplies[] = { "vdd", "vddp" };
> > + struct isa1200 *isa = i2c_get_clientdata(client);
> > + struct isa1200_config *config = &isa->config;
> > + struct device *dev = &client->dev;
> > + struct fwnode_handle *ldo_node;
> > + int ret;
> > +
> > + isa->clk = devm_clk_get_optional(dev, NULL);
> > + if (IS_ERR(isa->clk))
> > + return dev_err_probe(dev, PTR_ERR(isa->clk),
> > + "failed to get clock\n");
> > +
> > + isa->pwm = devm_pwm_get(dev, NULL);
> > + if (IS_ERR(isa->pwm)) {
> > + ret = PTR_ERR(isa->pwm);
> > + if (ret == -ENODEV || ret == -EINVAL)
> > + isa->pwm = NULL;
> > + else
> > + return dev_err_probe(dev, ret, "getting PWM\n");
> > + }
> > +
> > + if (!isa->clk && !isa->pwm)
> > + return dev_err_probe(dev, -EINVAL,
> > + "clock or PWM are required, none were provided\n");
> > +
> > + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(isa1200_supplies),
> > + isa1200_supplies);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "failed to set up supplies\n");
> > +
> > + isa->enable_gpios = devm_gpiod_get_array_optional(dev, "control",
> > + GPIOD_OUT_LOW);
> > + if (IS_ERR(isa->enable_gpios))
> > + return dev_err_probe(dev, PTR_ERR(isa->enable_gpios),
> > + "failed to get enable gpios\n");
> > +
> > + ldo_node = device_get_named_child_node(dev, "ldo");
> > + if (!ldo_node)
> > + return dev_err_probe(dev, -ENODEV,
> > + "failed to get embedded LDO node\n");
> > +
> > + ret = fwnode_property_read_u32(ldo_node, "regulator-min-microvolt",
> > + &config->ldo_voltage);
> > + fwnode_handle_put(ldo_node);
> > + if (ret)
> > + return dev_err_probe(dev, ret,
> > + "failed to get ldo voltage\n");
> > +
> > + config->ldo_voltage = clamp(config->ldo_voltage,
> > + ISA1200_LDO_VOLTAGE_MIN,
> > + ISA1200_LDO_VOLTAGE_MAX);
> > +
> > + config->ldo_voltage /= ISA1200_LDO_VOLTAGE_STEP;
> > + if (config->ldo_voltage < ISA1200_LDO_VOLTAGE_3V1)
> > + config->ldo_voltage = config->ldo_voltage -
> > + ISA1200_LDO_VOLTAGE_2V3 +
> > + ISA1200_LDO_VOLTAGE_BASE;
> > + else
> > + config->ldo_voltage -= ISA1200_LDO_VOLTAGE_3V1;
> > +
> > + config->mode = 0; /* LRA_MODE */
> > + device_property_read_u32(dev, "imagis,mode", &config->mode);
> > +
> > + config->clkdiv = ISA1200_HCTRL0_CLKDIV_128;
> > + device_property_read_u32(dev, "imagis,clk-div", &config->clkdiv);
> > + if (!config->clkdiv)
> > + return dev_err_probe(dev, -EINVAL, "clk-div cannot be zero\n");
> > +
> > + config->clkdiv = clamp(config->clkdiv, ISA1200_HCTRL0_CLKDIV_128,
> > + ISA1200_HCTRL0_CLKDIV_128 << 3);
> > +
> > + ret = device_property_read_u32(dev, "imagis,pll-div", &config->plldiv);
> > + if (ret < 0 || !config->plldiv)
> > + config->plldiv = 1;
> > +
> > + config->period = 0;
> > + config->freq = 0;
> > + config->duty = 0;
> > +
> > + if (isa->clk) {
> > + ret = device_property_read_u32(dev, "imagis,period-ns",
> > + &config->period);
> > + if (ret)
> > + return dev_err_probe(dev, ret,
> > + "failed to get period\n");
> > +
> > + /*
> > + * TODO: The scale value is arbitrary, but it fits observations
> > + * quite well, and the exact conversion method is unknown.
> > + * The period property value returned above is the HCTRL6
> > + * register value set by the vendor code, multiplied by 100.
> > + */
> > + config->period /= ISA1200_HCTRL6_PERIOD_SCALE;
> > + config->duty = config->period >> 1;
> > + }
> > +
> > + if (isa->pwm) {
> > + struct pwm_state state;
> > +
> > + pwm_init_state(isa->pwm, &state);
> > +
> > + if (!state.period)
> > + return dev_err_probe(dev, -EINVAL,
> > + "PWM period cannot be zero\n");
> > +
> > + config->freq = div64_u64(NANO, state.period * config->clkdiv);
> > + config->duty = state.period >> 1;
> > +
> > + ret = pwm_apply_might_sleep(isa->pwm, &state);
> > + if (ret)
> > + return dev_err_probe(dev, ret,
> > + "failed to apply initial PWM state\n");
> > + }
> > +
> > + /*
> > + * TODO: If device is using a clock, this property should return the
> > + * value written to the HCTRL5 register by downstrem code. It likely
> > + * needs to be converted into a meaningful duty cycle value, though
> > + * unfortunately the exact conversion mechanism is unknown. If the
> > + * device uses PWM, this property will return the correct duty cycle
> > + * in nanoseconds.
> > + */
> > + device_property_read_u32(dev, "imagis,duty-cycle-ns", &config->duty);
> > +
> > + return 0;
> > +}
> > +
> > +static int isa1200_probe(struct i2c_client *client)
> > +{
> > + struct isa1200 *isa;
> > + struct device *dev = &client->dev;
> > + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> > + u32 val;
> > + int ret;
> > +
> > + isa = devm_kzalloc(dev, sizeof(*isa), GFP_KERNEL);
> > + if (!isa)
> > + return -ENOMEM;
> > +
> > + isa->input = devm_input_allocate_device(dev);
> > + if (!isa->input)
> > + return -ENOMEM;
> > +
> > + i2c_set_clientdata(client, isa);
> > +
> > + ret = isa1200_of_probe(client);
> > + if (ret)
> > + return ret;
> > +
> > + isa->map = devm_regmap_init_i2c(client, &isa1200_regmap_config);
> > + if (IS_ERR(isa->map))
> > + return dev_err_probe(dev, PTR_ERR(isa->map),
> > + "failed to initialize register map\n");
> > +
> > + ret = clk_prepare_enable(isa->clk);
> > + if (ret < 0)
> > + return dev_err_probe(dev, ret, "failed to enable clock\n");
> > +
> > + isa->clk_on = true;
> > +
> > + bitmap_fill(values, ISA1200_EN_PINS_MAX);
> > + gpiod_multi_set_value_cansleep(isa->enable_gpios, values);
>
> You should factor our isa1200_power_on() from isa1200_start() and use it
> here.
>
> > +
> > + ret = devm_add_action_or_reset(dev, isa1200_power_off, isa);
> > + if (ret)
> > + return ret;
>
> close() is taking care of powering off the device.
>
> > +
> > + usleep_range(200, 300);
> > +
> > + /* Read a register so we know that regmap and I2C transport works */
> > + ret = regmap_read(isa->map, ISA1200_SCTRL, &val);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "failed to read SCTRL\n");
>
> You should call isa1200_power_off() here. You do not know when the first
> effect will play. In the meantime the device should be in low power
> state.
>
Oh, so probe should leave device powered off. That is very nice, I can
just remove regmap access, and don't touch power sequences at all.
That will simplify code quite a bit.
> > +
> > + ret = devm_work_autocancel(dev, &isa->play_work, isa1200_play_work);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "failed to init work\n");
>
> I do not think you need it here. You supply input->close() and that
> should take care of stopping/canceling the work. Input core guarantees
> to call close() if the device is "open" whne unregistering.
>
Here and all next comments. Acknowledged, I will adjust accordingly. Thank you.
> > +
> > + isa->input->name = "isa1200-haptic";
> > + isa->input->id.bustype = BUS_HOST;
>
> Not BUS_I2C?
>
> > + isa->input->dev.parent = dev;
>
> Parent is already set by devm_input_allocate_device().
>
> > + isa->input->close = isa1200_vibrator_close;
> > +
> > + input_set_drvdata(isa->input, isa);
> > +
> > + /* TODO: this hardware can likely support more than rumble */
> > + input_set_capability(isa->input, EV_FF, FF_RUMBLE);
> > +
> > + ret = input_ff_create_memless(isa->input, NULL,
> > + isa1200_vibrator_play_effect);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "couldn't create FF dev\n");
>
> "failed ..."
>
> > +
> > + ret = input_register_device(isa->input);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "couldn't register input dev\n");
>
> "failed ..."
>
> > +
> > + return ret;
>
> return 0;
>
> > +}
> > +
> > +static int isa1200_suspend(struct device *dev)
> > +{
> > + struct isa1200 *isa = dev_get_drvdata(dev);
> > +
> > + cancel_work_sync(&isa->play_work);
>
> Move it under input_device_enabled().
>
> > +
> > + guard(mutex)(&isa->input->mutex);
> > +
> > + if (input_device_enabled(isa->input))
> > + if (isa->level)
> > + isa1200_stop(isa);
> > +
> > + return 0;
> > +}
> > +
> > +static int isa1200_resume(struct device *dev)
> > +{
> > + struct isa1200 *isa = dev_get_drvdata(dev);
> > +
> > + guard(mutex)(&isa->input->mutex);
> > +
> > + if (input_device_enabled(isa->input))
> > + if (isa->level)
> > + isa1200_start(isa);
> > +
> > + return 0;
> > +}
> > +
> > +static DEFINE_SIMPLE_DEV_PM_OPS(isa1200_pm_ops, isa1200_suspend, isa1200_resume);
> > +
> > +static const struct of_device_id isa1200_of_match[] = {
> > + { .compatible = "imagis,isa1200" },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, isa1200_of_match);
> > +
> > +static struct i2c_driver isa1200_i2c_driver = {
> > + .driver = {
> > + .name = "isa1200",
> > + .of_match_table = isa1200_of_match,
> > + .pm = pm_sleep_ptr(&isa1200_pm_ops),
> > + },
> > + .probe = isa1200_probe,
> > +};
> > +module_i2c_driver(isa1200_i2c_driver);
> > +
> > +MODULE_AUTHOR("Linus Walleij <linusw@kernel.org>");
> > +MODULE_AUTHOR("Svyatoslav Ryhel <clamor95@gmail.com>");
> > +MODULE_DESCRIPTION("Imagis ISA1200 haptic feedback unit");
> > +MODULE_LICENSE("GPL");
>
> Thanks.
>
> --
> Dmitry
^ permalink raw reply
* Re: [PATCH v4 2/2] Input: isa1200 - new driver for Imagis ISA1200
From: Dmitry Torokhov @ 2026-05-08 5:40 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij,
linux-input, devicetree, linux-kernel
In-Reply-To: <CAPVz0n0w98wO_iJBiyvKqATA7a6+mkZG3DfbBwHp8FEExMHPqQ@mail.gmail.com>
On Fri, May 08, 2026 at 08:30:19AM +0300, Svyatoslav Ryhel wrote:
> чт, 7 трав. 2026 р. о 22:26 Dmitry Torokhov <dmitry.torokhov@gmail.com> пише:
> >
> > Hi Svyatoslav,
> >
> > On Thu, May 07, 2026 at 04:39:48PM +0300, Svyatoslav Ryhel wrote:
> > > From: Linus Walleij <linusw@kernel.org>
> > >
> > > The ISA1200 is a haptic feedback unit from Imagis Technology using two
> > > motors for haptic feedback in mobile phones. Used in many mobile devices
> > > c. 2012 including Samsung Galxy S Advance GT-I9070 (Janice), Samsung Beam
> > > GT-I8350 (Gavini), LG Optimus 4X P880 and LG Optimus Vu P895.
> > >
> > > The exact datasheet for the ISA1200 is not available; all data was modeled
> > > based on available downstream kernel sources for various devices and
> > > fragments of information scattered across the internet.
> > >
> > > Tested-by: Linus Walleij <linusw@kernel.org> # GT-I9070 Janice
> > > Signed-off-by: Linus Walleij <linusw@kernel.org>
> > > Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > > Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > > ---
> > > drivers/input/misc/Kconfig | 12 +
> > > drivers/input/misc/Makefile | 1 +
> > > drivers/input/misc/isa1200.c | 540 +++++++++++++++++++++++++++++++++++
> > > 3 files changed, 553 insertions(+)
> > > create mode 100644 drivers/input/misc/isa1200.c
> > >
> > > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > > index 94a753fcb64f..52f192104ee2 100644
> > > --- a/drivers/input/misc/Kconfig
> > > +++ b/drivers/input/misc/Kconfig
> > > @@ -852,6 +852,18 @@ config INPUT_IQS7222
> > > To compile this driver as a module, choose M here: the
> > > module will be called iqs7222.
> > >
> > > +config INPUT_ISA1200_HAPTIC
> > > + tristate "Imagis ISA1200 haptic feedback unit"
> > > + depends on I2C
> > > + select INPUT_FF_MEMLESS
> > > + select REGMAP_I2C
> > > + help
> > > + Say Y to enable support for the Imagis ISA1200 haptic
> > > + feedback unit.
> > > +
> > > + To compile this driver as a module, choose M here: the
> > > + module will be called isa1200.
> > > +
> > > config INPUT_CMA3000
> > > tristate "VTI CMA3000 Tri-axis accelerometer"
> > > help
> > > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> > > index 415fc4e2918b..d62bf2e9d85f 100644
> > > --- a/drivers/input/misc/Makefile
> > > +++ b/drivers/input/misc/Makefile
> > > @@ -49,6 +49,7 @@ obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
> > > obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o
> > > obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o
> > > obj-$(CONFIG_INPUT_IQS7222) += iqs7222.o
> > > +obj-$(CONFIG_INPUT_ISA1200_HAPTIC) += isa1200.o
> > > obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
> > > obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
> > > obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
> > > diff --git a/drivers/input/misc/isa1200.c b/drivers/input/misc/isa1200.c
> > > new file mode 100644
> > > index 000000000000..f8dba8a95c7d
> > > --- /dev/null
> > > +++ b/drivers/input/misc/isa1200.c
> > > @@ -0,0 +1,540 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +
> > > +#include <linux/array_size.h>
> > > +#include <linux/bitmap.h>
> > > +#include <linux/bits.h>
> > > +#include <linux/clk.h>
> > > +#include <linux/delay.h>
> > > +#include <linux/device.h>
> > > +#include <linux/devm-helpers.h>
> > > +#include <linux/err.h>
> > > +#include <linux/gpio/consumer.h>
> > > +#include <linux/i2c.h>
> > > +#include <linux/input.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/module.h>
> > > +#include <linux/property.h>
> > > +#include <linux/pwm.h>
> > > +#include <linux/regmap.h>
> > > +#include <linux/regulator/consumer.h>
> > > +#include <linux/units.h>
> > > +
> > > +/*
> > > + * System control (LDO regulator)
> > > + *
> > > + * LDO voltage to register mapping is linear, but it is split in two parts:
> > > + * 2.3V - 3.0V map to 0x08 - 0x0f; 3.1V - 3.8V map to 0x00 - 0x7
> > > + */
> > > +
> > > +#define ISA1200_SCTRL 0x00
> > > +#define ISA1200_LDO_VOLTAGE_BASE 0x08
> > > +#define ISA1200_LDO_VOLTAGE_STEP 100000
> > > +#define ISA1200_LDO_VOLTAGE_2V3 23
> > > +#define ISA1200_LDO_VOLTAGE_3V1 31
> > > +#define ISA1200_LDO_VOLTAGE_MIN 2300000
> > > +#define ISA1200_LDO_VOLTAGE_MAX 3800000
> > > +
> > > +/*
> > > + * The output frequency is calculated with this formula:
> > > + *
> > > + * base clock frequency
> > > + * fout = -----------------------------------------
> > > + * (128 - PWM_FREQ) * 2 * PLLDIV * PWM_PERIOD
> > > + *
> > > + * The base clock frequency is the clock frequency provided on the
> > > + * clock input to the chip, divided by the value in HCTRL0
> > > + *
> > > + * PWM_FREQ is configured in register HCTRL4, it is common to set this
> > > + * to 0 to get only two variables to calculate.
> > > + *
> > > + * PLLDIV is configured in register HCTRL3 (bits 7..4, so 0..15)
> > > + * PWM_PERIOD is configured in register HCTRL6
> > > + * Further the duty cycle can be configured in HCTRL5
> > > + */
> > > +
> > > +/*
> > > + * HCTRL0 configures clock or PWM input and selects the divider for
> > > + * the clock input.
> > > + */
> > > +#define ISA1200_HCTRL0 0x30
> > > +#define ISA1200_HCTRL0_HAP_ENABLE BIT(7)
> > > +#define ISA1200_HCTRL0_PWM_GEN_MODE BIT(4)
> > > +#define ISA1200_HCTRL0_PWM_INPUT_MODE BIT(3)
> > > +#define ISA1200_HCTRL0_CLKDIV_128 128
> > > +
> > > +/*
> > > + * HCTRL1 configures the motor type and clock sourse
> > > + */
> > > +#define ISA1200_HCTRL1 0x31
> > > +#define ISA1200_HCTRL1_EXT_CLOCK BIT(7)
> > > +#define ISA1200_HCTRL1_DAC_INVERT BIT(6)
> > > +#define ISA1200_HCTRL1_MODE(n) (((n) & 1) << 5)
> >
> > I wonder if this should simply be BIT(5) and you conditionally use it in
> > the code. The macro is not really usable to disable the setting...
> >
>
> That was the initial idea but mode is not boolean it is an enum and
> macro fits better to handle enum. Code does not enable/disable this
> field, this field is configured with every start call.
OK.
>
> > > +
> > > +/* HCTRL2 controls software reset of the chip */
> > > +#define ISA1200_HCTRL2 0x32
> > > +#define ISA1200_HCTRL2_SW_RESET BIT(0)
> > > +
> > > +/*
> > > + * HCTRL3 controls the PLL divisor
> > > + *
> > > + * Bits [0,1] are always set to 1 (we don't know what they are
> > > + * used for) and bit 4 and upward control the PLL divisor.
> > > + */
> > > +#define ISA1200_HCTRL3 0x33
> > > +#define ISA1200_HCTRL3_DEFAULT 0x03
> > > +#define ISA1200_HCTRL3_PLLDIV(n) (((n) & 0xf) << 4)
> > > +
> > > +/* HCTRL4 controls the PWM frequency of external channel */
> > > +#define ISA1200_HCTRL4 0x34
> > > +
> > > +/* HCTRL5 controls the PWM high duty cycle of internal channel */
> > > +#define ISA1200_HCTRL5 0x35
> > > +
> > > +/* HCTRL6 controls the PWM period of internal channel */
> > > +#define ISA1200_HCTRL6 0x36
> > > +#define ISA1200_HCTRL6_PERIOD_SCALE 100
> > > +
> > > +/* The use for these registers is unknown but they exist */
> > > +#define ISA1200_HCTRL7 0x37
> > > +#define ISA1200_HCTRL8 0x38
> > > +#define ISA1200_HCTRL9 0x39
> > > +#define ISA1200_HCTRLA 0x3a
> > > +#define ISA1200_HCTRLB 0x3b
> > > +#define ISA1200_HCTRLC 0x3c
> > > +#define ISA1200_HCTRLD 0x3d
> > > +
> > > +#define ISA1200_EN_PINS_MAX 2
> > > +
> > > +struct isa1200_config {
> > > + u32 ldo_voltage;
> > > + u32 mode;
> > > + u32 clkdiv;
> > > + u32 plldiv;
> > > + u32 freq;
> > > + u32 period;
> > > + u32 duty;
> > > +};
> > > +
> > > +struct isa1200 {
> > > + struct input_dev *input;
> > > + struct regmap *map;
> > > +
> > > + struct clk *clk;
> > > + struct pwm_device *pwm;
> > > + struct gpio_descs *enable_gpios;
> > > +
> > > + struct work_struct play_work;
> > > + struct isa1200_config config;
> > > +
> > > + int level;
> > > + bool clk_on;
> >
> > I think you need not only clk_on, but general "active" flag that you
> > would set at the end of isa1200_start().
> >
>
> Acknowledged.
>
> > > +};
> > > +
> > > +static const struct regmap_config isa1200_regmap_config = {
> > > + .reg_bits = 8,
> > > + .val_bits = 8,
> > > + .max_register = ISA1200_HCTRLD,
> > > +};
> > > +
> > > +static void isa1200_start(struct isa1200 *isa)
> > > +{
> > > + struct isa1200_config *config = &isa->config;
> > > + struct pwm_state state;
> > > + u8 hctrl0 = 0, hctrl1 = 0;
> > > + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> > > + int ret;
> >
> > Please use "error" or "err" for all variables that only hold error codes
> > (or 0) instead of a real value that is used for something.
> >
>
> Not real value, but return value. Why I cannot use ret aka return
> value? It is much more versatile since it can hold any function return
> value including errors.
This is my preference for input. I do not want versatility, I want the
opposite: if I see error I do not need to consider whether it holds
something of value besides an error code. And if I see "ret" or "retval"
I know that caller might be interested the value. And also
if (error) {
// handle error
}
looks neat.
>
> > > +
> > > + if (!isa->clk_on) {
> > > + ret = clk_prepare_enable(isa->clk);
> >
> > This return 0 on success so
> >
> > if (error)
> > return;
> >
>
> No, code is correct. If clock enable fails, further function execution
> should stop since regmap operations on unconfigured device is not
> desirable. Since this function is void using general "active" flag as
> you suggested to indicate that start reached end would be beneficial.
I am simply saying that you do not need to check if value is negative,
checking that it is non-zero is sufficient.
Thanks.
--
Dmitry
^ permalink raw reply
* Re: [PATCH v4 2/2] Input: isa1200 - new driver for Imagis ISA1200
From: Svyatoslav Ryhel @ 2026-05-08 5:57 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij,
linux-input, devicetree, linux-kernel
In-Reply-To: <af115srC-zwjDxzq@google.com>
пт, 8 трав. 2026 р. о 08:40 Dmitry Torokhov <dmitry.torokhov@gmail.com> пише:
>
> On Fri, May 08, 2026 at 08:30:19AM +0300, Svyatoslav Ryhel wrote:
> > чт, 7 трав. 2026 р. о 22:26 Dmitry Torokhov <dmitry.torokhov@gmail.com> пише:
> > >
> > > Hi Svyatoslav,
> > >
> > > On Thu, May 07, 2026 at 04:39:48PM +0300, Svyatoslav Ryhel wrote:
> > > > From: Linus Walleij <linusw@kernel.org>
> > > >
> > > > The ISA1200 is a haptic feedback unit from Imagis Technology using two
> > > > motors for haptic feedback in mobile phones. Used in many mobile devices
> > > > c. 2012 including Samsung Galxy S Advance GT-I9070 (Janice), Samsung Beam
> > > > GT-I8350 (Gavini), LG Optimus 4X P880 and LG Optimus Vu P895.
> > > >
> > > > The exact datasheet for the ISA1200 is not available; all data was modeled
> > > > based on available downstream kernel sources for various devices and
> > > > fragments of information scattered across the internet.
> > > >
> > > > Tested-by: Linus Walleij <linusw@kernel.org> # GT-I9070 Janice
> > > > Signed-off-by: Linus Walleij <linusw@kernel.org>
> > > > Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > > > Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > > > ---
> > > > drivers/input/misc/Kconfig | 12 +
> > > > drivers/input/misc/Makefile | 1 +
> > > > drivers/input/misc/isa1200.c | 540 +++++++++++++++++++++++++++++++++++
> > > > 3 files changed, 553 insertions(+)
> > > > create mode 100644 drivers/input/misc/isa1200.c
> > > >
> > > > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > > > index 94a753fcb64f..52f192104ee2 100644
> > > > --- a/drivers/input/misc/Kconfig
> > > > +++ b/drivers/input/misc/Kconfig
> > > > @@ -852,6 +852,18 @@ config INPUT_IQS7222
> > > > To compile this driver as a module, choose M here: the
> > > > module will be called iqs7222.
> > > >
> > > > +config INPUT_ISA1200_HAPTIC
> > > > + tristate "Imagis ISA1200 haptic feedback unit"
> > > > + depends on I2C
> > > > + select INPUT_FF_MEMLESS
> > > > + select REGMAP_I2C
> > > > + help
> > > > + Say Y to enable support for the Imagis ISA1200 haptic
> > > > + feedback unit.
> > > > +
> > > > + To compile this driver as a module, choose M here: the
> > > > + module will be called isa1200.
> > > > +
> > > > config INPUT_CMA3000
> > > > tristate "VTI CMA3000 Tri-axis accelerometer"
> > > > help
> > > > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> > > > index 415fc4e2918b..d62bf2e9d85f 100644
> > > > --- a/drivers/input/misc/Makefile
> > > > +++ b/drivers/input/misc/Makefile
> > > > @@ -49,6 +49,7 @@ obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
> > > > obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o
> > > > obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o
> > > > obj-$(CONFIG_INPUT_IQS7222) += iqs7222.o
> > > > +obj-$(CONFIG_INPUT_ISA1200_HAPTIC) += isa1200.o
> > > > obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
> > > > obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
> > > > obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
> > > > diff --git a/drivers/input/misc/isa1200.c b/drivers/input/misc/isa1200.c
> > > > new file mode 100644
> > > > index 000000000000..f8dba8a95c7d
> > > > --- /dev/null
> > > > +++ b/drivers/input/misc/isa1200.c
> > > > @@ -0,0 +1,540 @@
> > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > +
> > > > +#include <linux/array_size.h>
> > > > +#include <linux/bitmap.h>
> > > > +#include <linux/bits.h>
> > > > +#include <linux/clk.h>
> > > > +#include <linux/delay.h>
> > > > +#include <linux/device.h>
> > > > +#include <linux/devm-helpers.h>
> > > > +#include <linux/err.h>
> > > > +#include <linux/gpio/consumer.h>
> > > > +#include <linux/i2c.h>
> > > > +#include <linux/input.h>
> > > > +#include <linux/kernel.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/property.h>
> > > > +#include <linux/pwm.h>
> > > > +#include <linux/regmap.h>
> > > > +#include <linux/regulator/consumer.h>
> > > > +#include <linux/units.h>
> > > > +
> > > > +/*
> > > > + * System control (LDO regulator)
> > > > + *
> > > > + * LDO voltage to register mapping is linear, but it is split in two parts:
> > > > + * 2.3V - 3.0V map to 0x08 - 0x0f; 3.1V - 3.8V map to 0x00 - 0x7
> > > > + */
> > > > +
> > > > +#define ISA1200_SCTRL 0x00
> > > > +#define ISA1200_LDO_VOLTAGE_BASE 0x08
> > > > +#define ISA1200_LDO_VOLTAGE_STEP 100000
> > > > +#define ISA1200_LDO_VOLTAGE_2V3 23
> > > > +#define ISA1200_LDO_VOLTAGE_3V1 31
> > > > +#define ISA1200_LDO_VOLTAGE_MIN 2300000
> > > > +#define ISA1200_LDO_VOLTAGE_MAX 3800000
> > > > +
> > > > +/*
> > > > + * The output frequency is calculated with this formula:
> > > > + *
> > > > + * base clock frequency
> > > > + * fout = -----------------------------------------
> > > > + * (128 - PWM_FREQ) * 2 * PLLDIV * PWM_PERIOD
> > > > + *
> > > > + * The base clock frequency is the clock frequency provided on the
> > > > + * clock input to the chip, divided by the value in HCTRL0
> > > > + *
> > > > + * PWM_FREQ is configured in register HCTRL4, it is common to set this
> > > > + * to 0 to get only two variables to calculate.
> > > > + *
> > > > + * PLLDIV is configured in register HCTRL3 (bits 7..4, so 0..15)
> > > > + * PWM_PERIOD is configured in register HCTRL6
> > > > + * Further the duty cycle can be configured in HCTRL5
> > > > + */
> > > > +
> > > > +/*
> > > > + * HCTRL0 configures clock or PWM input and selects the divider for
> > > > + * the clock input.
> > > > + */
> > > > +#define ISA1200_HCTRL0 0x30
> > > > +#define ISA1200_HCTRL0_HAP_ENABLE BIT(7)
> > > > +#define ISA1200_HCTRL0_PWM_GEN_MODE BIT(4)
> > > > +#define ISA1200_HCTRL0_PWM_INPUT_MODE BIT(3)
> > > > +#define ISA1200_HCTRL0_CLKDIV_128 128
> > > > +
> > > > +/*
> > > > + * HCTRL1 configures the motor type and clock sourse
> > > > + */
> > > > +#define ISA1200_HCTRL1 0x31
> > > > +#define ISA1200_HCTRL1_EXT_CLOCK BIT(7)
> > > > +#define ISA1200_HCTRL1_DAC_INVERT BIT(6)
> > > > +#define ISA1200_HCTRL1_MODE(n) (((n) & 1) << 5)
> > >
> > > I wonder if this should simply be BIT(5) and you conditionally use it in
> > > the code. The macro is not really usable to disable the setting...
> > >
> >
> > That was the initial idea but mode is not boolean it is an enum and
> > macro fits better to handle enum. Code does not enable/disable this
> > field, this field is configured with every start call.
>
> OK.
>
> >
> > > > +
> > > > +/* HCTRL2 controls software reset of the chip */
> > > > +#define ISA1200_HCTRL2 0x32
> > > > +#define ISA1200_HCTRL2_SW_RESET BIT(0)
> > > > +
> > > > +/*
> > > > + * HCTRL3 controls the PLL divisor
> > > > + *
> > > > + * Bits [0,1] are always set to 1 (we don't know what they are
> > > > + * used for) and bit 4 and upward control the PLL divisor.
> > > > + */
> > > > +#define ISA1200_HCTRL3 0x33
> > > > +#define ISA1200_HCTRL3_DEFAULT 0x03
> > > > +#define ISA1200_HCTRL3_PLLDIV(n) (((n) & 0xf) << 4)
> > > > +
> > > > +/* HCTRL4 controls the PWM frequency of external channel */
> > > > +#define ISA1200_HCTRL4 0x34
> > > > +
> > > > +/* HCTRL5 controls the PWM high duty cycle of internal channel */
> > > > +#define ISA1200_HCTRL5 0x35
> > > > +
> > > > +/* HCTRL6 controls the PWM period of internal channel */
> > > > +#define ISA1200_HCTRL6 0x36
> > > > +#define ISA1200_HCTRL6_PERIOD_SCALE 100
> > > > +
> > > > +/* The use for these registers is unknown but they exist */
> > > > +#define ISA1200_HCTRL7 0x37
> > > > +#define ISA1200_HCTRL8 0x38
> > > > +#define ISA1200_HCTRL9 0x39
> > > > +#define ISA1200_HCTRLA 0x3a
> > > > +#define ISA1200_HCTRLB 0x3b
> > > > +#define ISA1200_HCTRLC 0x3c
> > > > +#define ISA1200_HCTRLD 0x3d
> > > > +
> > > > +#define ISA1200_EN_PINS_MAX 2
> > > > +
> > > > +struct isa1200_config {
> > > > + u32 ldo_voltage;
> > > > + u32 mode;
> > > > + u32 clkdiv;
> > > > + u32 plldiv;
> > > > + u32 freq;
> > > > + u32 period;
> > > > + u32 duty;
> > > > +};
> > > > +
> > > > +struct isa1200 {
> > > > + struct input_dev *input;
> > > > + struct regmap *map;
> > > > +
> > > > + struct clk *clk;
> > > > + struct pwm_device *pwm;
> > > > + struct gpio_descs *enable_gpios;
> > > > +
> > > > + struct work_struct play_work;
> > > > + struct isa1200_config config;
> > > > +
> > > > + int level;
> > > > + bool clk_on;
> > >
> > > I think you need not only clk_on, but general "active" flag that you
> > > would set at the end of isa1200_start().
> > >
> >
> > Acknowledged.
> >
> > > > +};
> > > > +
> > > > +static const struct regmap_config isa1200_regmap_config = {
> > > > + .reg_bits = 8,
> > > > + .val_bits = 8,
> > > > + .max_register = ISA1200_HCTRLD,
> > > > +};
> > > > +
> > > > +static void isa1200_start(struct isa1200 *isa)
> > > > +{
> > > > + struct isa1200_config *config = &isa->config;
> > > > + struct pwm_state state;
> > > > + u8 hctrl0 = 0, hctrl1 = 0;
> > > > + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> > > > + int ret;
> > >
> > > Please use "error" or "err" for all variables that only hold error codes
> > > (or 0) instead of a real value that is used for something.
> > >
> >
> > Not real value, but return value. Why I cannot use ret aka return
> > value? It is much more versatile since it can hold any function return
> > value including errors.
>
> This is my preference for input. I do not want versatility, I want the
> opposite: if I see error I do not need to consider whether it holds
> something of value besides an error code. And if I see "ret" or "retval"
> I know that caller might be interested the value. And also
>
> if (error) {
> // handle error
> }
>
> looks neat.
>
Ok, noted
> >
> > > > +
> > > > + if (!isa->clk_on) {
> > > > + ret = clk_prepare_enable(isa->clk);
> > >
> > > This return 0 on success so
> > >
> > > if (error)
> > > return;
> > >
> >
> > No, code is correct. If clock enable fails, further function execution
> > should stop since regmap operations on unconfigured device is not
> > desirable. Since this function is void using general "active" flag as
> > you suggested to indicate that start reached end would be beneficial.
>
> I am simply saying that you do not need to check if value is negative,
> checking that it is non-zero is sufficient.
>
I have poorly worded. I meant that err < 0 specifically checks for
error code regardless of function you are checking (in most cases) and
you don't have to check if the original function documentation. But if
(err) is fine by me as well.
> Thanks.
>
> --
> Dmitry
^ permalink raw reply
* Re: [PATCH v4 10/11] Input: stmfts - support FTS5
From: Dmitry Torokhov @ 2026-05-08 6:11 UTC (permalink / raw)
To: david
Cc: Maxime Coquelin, Alexandre Torgue, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Henrik Rydberg,
Bjorn Andersson, Konrad Dybcio, Petr Hodina, linux-input,
linux-stm32, linux-arm-kernel, linux-kernel, Krzysztof Kozlowski,
devicetree, linux-arm-msm, phone-devel
In-Reply-To: <20260409-stmfts5-v4-10-64fe62027db5@ixit.cz>
Hi David,
On Thu, Apr 09, 2026 at 12:15:53AM +0200, David Heidelberg via B4 Relay wrote:
> @@ -101,12 +129,27 @@ struct stmfts_data {
>
> struct completion cmd_done;
>
> + unsigned long touch_id;
> + unsigned long stylus_id;
I wonder why do you track contacts yourself instead of telling input
core to do it for you and report BTN_TOUCH as needed? You just need to
call input_mt_sync_frame() when you are done processing input frame.
Does the device send all contacts state in one transmission or it can
transmit contacts one by one?
> +
> + /* Boundary check - some devices report max value, adjust */
> + if (x >= sdata->prop.max_x)
> + x = sdata->prop.max_x - 1;
> + if (y >= sdata->prop.max_y)
> + y = sdata->prop.max_y - 1;
It is allowed to exceed declared min and max, so this clampin is not
needed.
>
> +static int stmfts5_set_scan_mode(struct stmfts_data *sdata, const u8 val)
> +{
> + int err;
> +
> + u8 scan_mode_cmd[3] = { STMFTS5_SET_SCAN_MODE, 0x00, val };
> + struct i2c_msg msg = {
> + .addr = sdata->client->addr,
> + .len = sizeof(scan_mode_cmd),
> + .buf = scan_mode_cmd,
> + };
> +
> + err = i2c_transfer(sdata->client->adapter, &msg, 1);
Is this i2c_master_send()?
> + if (err != 1)
> + return err < 0 ? err : -EIO;
> +
> + return 0;
> +
> +}
> +
> static int stmfts_input_open(struct input_dev *dev)
> {
> struct stmfts_data *sdata = input_get_drvdata(dev);
> @@ -371,6 +622,28 @@ static int stmfts_input_open(struct input_dev *dev)
> return 0;
> }
>
> +static int stmfts5_input_open(struct input_dev *dev)
> +{
> + struct stmfts_data *sdata = input_get_drvdata(dev);
> + int err;
> +
> + err = pm_runtime_resume_and_get(&sdata->client->dev);
> + if (err)
> + return err;
> +
> + mutex_lock(&sdata->mutex);
> + sdata->running = true;
> + mutex_unlock(&sdata->mutex);
scoped_guard(mutex, &sdata->mutex)
sdata->running;
> +
> + err = stmfts5_set_scan_mode(sdata, 0xff);
> + if (err) {
> + pm_runtime_put_sync(&sdata->client->dev);
Reset "running"?
> + return err;
> + }
> +
> + return 0;
> +}
> +
> static void stmfts_input_close(struct input_dev *dev)
> {
> struct stmfts_data *sdata = input_get_drvdata(dev);
> @@ -404,6 +677,23 @@ static void stmfts_input_close(struct input_dev *dev)
> pm_runtime_put_sync(&sdata->client->dev);
> }
>
> +static void stmfts5_input_close(struct input_dev *dev)
> +{
> + struct stmfts_data *sdata = input_get_drvdata(dev);
> + int err;
> +
> + err = stmfts5_set_scan_mode(sdata, 0x00);
> + if (err)
> + dev_warn(&sdata->client->dev,
> + "failed to disable touchscreen: %d\n", err);
> +
> + mutex_lock(&sdata->mutex);
> + sdata->running = false;
> + mutex_unlock(&sdata->mutex);
scoped_guard()
> +
> + pm_runtime_put_sync(&sdata->client->dev);
> +}
> +
> static ssize_t stmfts_sysfs_chip_id(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> @@ -484,10 +774,8 @@ static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev,
> guard(mutex)(&sdata->mutex);
>
> if (hover != sdata->hover_enabled) {
> - if (sdata->running) {
> - err = i2c_smbus_write_byte(sdata->client,
> - value ? STMFTS_SS_HOVER_SENSE_ON :
> - STMFTS_SS_HOVER_SENSE_OFF);
> + if (sdata->running && sdata->ops->set_hover) {
> + err = sdata->ops->set_hover(sdata, hover);
> if (err)
> return err;
> }
> @@ -612,7 +900,7 @@ static int stmfts_power_on(struct stmfts_data *sdata)
> if (sdata->reset_gpio)
> stmfts_reset(sdata);
>
> - err = stmfts_configure(sdata);
> + err = sdata->ops->configure(sdata);
> if (err)
> regulator_bulk_disable(ARRAY_SIZE(stmfts_supplies),
> sdata->supplies);
> @@ -620,6 +908,29 @@ static int stmfts_power_on(struct stmfts_data *sdata)
> return err;
> }
>
> +static int stmfts5_configure(struct stmfts_data *sdata)
> +{
> + u8 event[STMFTS_EVENT_SIZE];
> + int ret;
> +
> + /* Verify I2C communication */
> + ret = i2c_smbus_read_i2c_block_data(sdata->client,
> + STMFTS_READ_ALL_EVENT,
> + sizeof(event), event);
> + if (ret < 0)
> + return ret;
> +
> + enable_irq(sdata->client->irq);
> +
> + return 0;
> +}
> +
> +static void stmfts5_chip_power_off(struct stmfts_data *sdata)
> +{
> + i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_IN);
> + msleep(20);
> +}
> +
> static void stmfts_power_off(void *data)
> {
> struct stmfts_data *sdata = data;
> @@ -629,10 +940,73 @@ static void stmfts_power_off(void *data)
> if (sdata->reset_gpio)
> gpiod_set_value_cansleep(sdata->reset_gpio, 1);
>
> + if (sdata->ops->power_off)
> + sdata->ops->power_off(sdata);
> +
> regulator_bulk_disable(ARRAY_SIZE(stmfts_supplies),
> sdata->supplies);
> }
>
> +static int stmfts_setup_input(struct stmfts_data *sdata)
> +{
> + struct device *dev = &sdata->client->dev;
> +
> + input_set_abs_params(sdata->input, ABS_MT_ORIENTATION, 0, 255, 0, 0);
> + input_set_abs_params(sdata->input, ABS_DISTANCE, 0, 255, 0, 0);
> +
> + sdata->use_key = device_property_read_bool(dev, "touch-key-connected");
> + if (sdata->use_key) {
> + input_set_capability(sdata->input, EV_KEY, KEY_MENU);
> + input_set_capability(sdata->input, EV_KEY, KEY_BACK);
> + }
> +
> + return input_mt_init_slots(sdata->input, STMFTS_MAX_FINGERS,
> + INPUT_MT_DIRECT);
> +}
> +
> +static int stmfts5_setup_input(struct stmfts_data *sdata)
> +{
> + struct device *dev = &sdata->client->dev;
> +
> + sdata->mode_switch_gpio = devm_gpiod_get_optional(dev, "mode-switch",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(sdata->mode_switch_gpio))
> + return dev_err_probe(dev, PTR_ERR(sdata->mode_switch_gpio),
> + "Failed to get GPIO 'switch'\n");
> +
> + /* Mark as direct input device for calibration support */
> + __set_bit(INPUT_PROP_DIRECT, sdata->input->propbit);
> +
> + /* Set up basic touch capabilities */
> + input_set_capability(sdata->input, EV_KEY, BTN_TOUCH);
This will be done by input_mt_init_slots(..., INPUT_MT_DIRECT).
> +
> + /* Set resolution for accurate calibration */
> + if (!input_abs_get_res(sdata->input, ABS_MT_POSITION_X)) {
> + input_abs_set_res(sdata->input, ABS_MT_POSITION_X, 10);
> + input_abs_set_res(sdata->input, ABS_MT_POSITION_Y, 10);
> + }
> +
> + input_set_abs_params(sdata->input, ABS_MT_DISTANCE, 0, 255, 0, 0);
> +
> + /* Enable stylus support if requested */
> + sdata->stylus_enabled = device_property_read_bool(dev, "stylus-enabled");
> +
> + /* Initialize touch tracking bitmaps */
> + sdata->touch_id = 0;
> + sdata->stylus_id = 0;
> +
> + /* Initialize MT slots with support for pen tool type */
> + return input_mt_init_slots(sdata->input, STMFTS_MAX_FINGERS,
> + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
Why INPUT_MT_DROP_UNUSED?
> +}
> +
> +static int stmfts_set_hover(struct stmfts_data *sdata, bool enable)
> +{
> + return i2c_smbus_write_byte(sdata->client,
> + enable ? STMFTS_SS_HOVER_SENSE_ON :
> + STMFTS_SS_HOVER_SENSE_OFF);
> +}
> +
> static int stmfts_enable_led(struct stmfts_data *sdata)
> {
> int err;
> @@ -678,6 +1052,8 @@ static int stmfts_probe(struct i2c_client *client)
> mutex_init(&sdata->mutex);
> init_completion(&sdata->cmd_done);
>
> + sdata->ops = of_device_get_match_data(dev);
> +
> err = devm_regulator_bulk_get_const(dev,
> ARRAY_SIZE(stmfts_supplies),
> stmfts_supplies,
> @@ -697,8 +1073,8 @@ static int stmfts_probe(struct i2c_client *client)
>
> sdata->input->name = STMFTS_DEV_NAME;
> sdata->input->id.bustype = BUS_I2C;
> - sdata->input->open = stmfts_input_open;
> - sdata->input->close = stmfts_input_close;
> + sdata->input->open = sdata->ops->input_open;
> + sdata->input->close = sdata->ops->input_close;
>
> input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_X);
> input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_Y);
> @@ -706,19 +1082,9 @@ static int stmfts_probe(struct i2c_client *client)
>
> input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
> input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0);
> - input_set_abs_params(sdata->input, ABS_MT_ORIENTATION, 0, 255, 0, 0);
> input_set_abs_params(sdata->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
> - input_set_abs_params(sdata->input, ABS_DISTANCE, 0, 255, 0, 0);
> -
> - sdata->use_key = device_property_read_bool(dev,
> - "touch-key-connected");
> - if (sdata->use_key) {
> - input_set_capability(sdata->input, EV_KEY, KEY_MENU);
> - input_set_capability(sdata->input, EV_KEY, KEY_BACK);
> - }
>
> - err = input_mt_init_slots(sdata->input,
> - STMFTS_MAX_FINGERS, INPUT_MT_DIRECT);
> + err = sdata->ops->setup_input(sdata);
> if (err)
> return err;
>
> @@ -789,13 +1155,62 @@ static int stmfts_runtime_suspend(struct device *dev)
> return ret;
> }
>
> -static int stmfts_runtime_resume(struct device *dev)
> +static int stmfts_chip_runtime_resume(struct stmfts_data *sdata)
> +{
> + return i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_OUT);
> +}
> +
> +static int stmfts5_chip_runtime_resume(struct stmfts_data *sdata)
> {
> - struct stmfts_data *sdata = dev_get_drvdata(dev);
> struct i2c_client *client = sdata->client;
> + struct device *dev = &client->dev;
> + u8 int_enable_cmd[4] = {0xB6, 0x00, 0x2C, 0x01};
> + struct i2c_msg msg = {
> + .addr = client->addr,
> + .len = sizeof(int_enable_cmd),
> + .buf = int_enable_cmd,
> + };
> int ret;
"int err" everywhere where the variable carries error code or 0.
Thanks.
--
Dmitry
^ permalink raw reply
* [BUG] Oops in hidinput_hid_event with Apple Aluminum Bluetooth Keyboard
From: Michel Barthelemy @ 2026-05-08 10:48 UTC (permalink / raw)
To: jikos, benjamin.tissoires; +Cc: linux-input, linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 13348 bytes --]
[1.] One line summary:
Kernel Oops in hidinput_hid_event during rapid typing on Apple Aluminum
Bluetooth Keyboard
[2.] Full description of the problem/report:
System experiences a kernel NULL pointer dereference (Oops) when typing
rapidly on an Apple Aluminum Bluetooth Keyboard (Aluminium Wireless
Keyboard,
model A1314). The crash occurs in hidinput_hid_event+0x321 and causes
complete
system lockup requiring hard reboot.
The keyboard is connected via Bluetooth through a Broadcom BCM20702A0
dongle
(USB ID 0a5c:21e8). The hid-apple driver is properly loaded and bound
to the
keyboard. The crash is reproducible during fast typing, particularly
when
multiple keys are pressed in quick succession.
Steps to reproduce:
1. Pair Apple Aluminum Keyboard with system via Bluetooth Broadcom
dongle
2. Verify hid-apple driver is bound (confirmed via
/sys/bus/hid/devices/*/driver)
3. Type quickly and continuously on the keyboard
4. Within 30-60 seconds of rapid typing, kernel crashes with Oops
5. Bluetooth subsystem becomes unresponsive, requires hard power cycle
Note: The crash occurs even when the generic HID driver is forced; the
issue persists with both hid-generic and hid-apple.
[3.] Keywords:
HID, apple, keyboard, bluetooth, Oops, NULL pointer, hidinput_hid_event
[4.] Kernel version:
7.1.0-rc2-custom #1 SMP PREEMPT_DYNAMIC Tue May 5 09:34:05 CEST 2026
[5.] Most recent kernel version which did NOT have the bug:
Unknown — this is a custom kernel based on 7.1.0-rc2. The issue may
be present
in mainline as well.
[6.] Output of Oops message with symbolic information resolved:
12146 │ [14299.726587] BUG: unable to handle page fault for address:
ffffffffffffffe4
12147 │ [14299.726604] #PF: supervisor read access in kernel mode
12148 │ [14299.726610] #PF: error_code(0x0000) - not-present page
12149 │ [14299.726616] PGD 232825067 P4D 232825067 PUD 232827067 PMD 0
12150 │ [14299.726630] Oops: Oops: 0000 [#1] SMP NOPTI
12151 │ [14299.726642] CPU: 3 UID: 0 PID: 722 Comm: bluetoothd
Tainted: G S E 7.1.0-rc2-custom #1 PREEMPT(full)
12152 │ [14299.726655] Tainted: [S]=CPU_OUT_OF_SPEC,
[E]=UNSIGNED_MODULE
12153 │ [14299.726659] Hardware name: BESSTAR (HK) LIMITED
U500-H/VB9, BIOS 0.010 04/07/2020
12154 │ [14299.726665] RIP: 0010:hidinput_hid_event+0x321/0x910 [hid]
12155 │ [14299.726685] Code: 00 41 8b 57 30 48 8d 68 c8 48 39 c7 75
1c e9 17 fe ff ff 66 0f 1f 44 00 00 48 8b 45 38 48 8d 68 c8 48 39 c7 0f
84 0
│ 0 fe ff ff <3b> 55 1c 75 ea 48 85 ed 0f 84 f2 fd ff ff 8b 03
3d 44 00 85 00 0f
12156 │ [14299.726693] RSP: 0018:ffffd392026c7ae0 EFLAGS: 00010286
12157 │ [14299.726701] RAX: 0000000000000000 RBX: ffff8a7a9a783da4
RCX: 0000000000000000
12158 │ [14299.726707] RDX: 0000000000000090 RSI: 0000000000000016
RDI: ffff8a7a9bccdc18
12159 │ [14299.726712] RBP: ffffffffffffffc8 R08: 0000000000000000
R09: ffff8a7a95e1c800
12160 │ [14299.726718] R10: 0000000000000014 R11: ffff8a7a9a783238
R12: ffff8a7a9bccc000
12161 │ [14299.726723] R13: ffff8a7a9a783da4 R14: 0000000000000000
R15: ffff8a7a95d2f000
12162 │ [14299.726729] FS: 00007fe112863540(0000)
GS:ffff8a7e2799c000(0000) knlGS:0000000000000000
12163 │ [14299.726736] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
12164 │ [14299.726742] CR2: ffffffffffffffe4 CR3: 00000001157e6006
CR4: 00000000003726f0
12165 │ [14299.726748] Call Trace:
12166 │ [14299.726755] <TASK>
12167 │ [14299.726760] ? __wake_up+0x44/0x60
12168 │ [14299.726779] hid_process_event+0x119/0x130 [hid]
12169 │ [14299.726794] hid_report_raw_event+0x315/0x4b0 [hid]
12170 │ [14299.726810] __hid_input_report.constprop.0+0xfe/0x190
[hid]
12171 │ [14299.726824] uhid_char_write+0x41b/0x550 [uhid]
12172 │ [14299.726833] ? rw_verify_area+0x54/0x180
12173 │ [14299.726842] vfs_writev+0x26c/0x3d0
12174 │ [14299.726856] ? ksys_read+0xbe/0xe0
12175 │ [14299.726867] ? do_writev+0xeb/0x110
12176 │ [14299.726875] do_writev+0xeb/0x110
12177 │ [14299.726885] do_syscall_64+0xea/0x15e0
12178 │ [14299.726899] ? __x64_sys_ppoll+0xf3/0x160
12179 │ [14299.726910] ? switch_fpu_return+0x50/0xe0
12180 │ [14299.726920] ? do_syscall_64+0x290/0x15e0
12181 │ [14299.726930] ? ksys_read+0x6b/0xe0
12182 │ [14299.726940] ? do_syscall_64+0xea/0x15e0
12183 │ [14299.726949] ? do_syscall_64+0xea/0x15e0
12184 │ [14299.726957] ? do_syscall_64+0x9f/0x15e0
12185 │ [14299.726965] ? __irq_exit_rcu+0x4c/0xf0
12186 │ [14299.726974] entry_SYSCALL_64_after_hwframe+0x76/0x7e
12187 │ [14299.726982] RIP: 0033:0x7fe11299e197
12188 │ [14299.726990] Code: 48 89 fa 4c 89 df e8 98 af 00 00 8b 93
08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b
44 2
│ 4 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75
de e8 23 ff ff ff
12189 │ [14299.726996] RSP: 002b:00007ffd64b38710 EFLAGS: 00000202
ORIG_RAX: 0000000000000014
12190 │ [14299.727005] RAX: ffffffffffffffda RBX: 00007fe112863540
RCX: 00007fe11299e197
12191 │ [14299.727010] RDX: 0000000000000001 RSI: 00007ffd64b38780
RDI: 0000000000000012
12192 │ [14299.727015] RBP: 0000000000000001 R08: 0000000000000000
R09: 0000000000000000
12193 │ [14299.727019] R10: 0000000000000000 R11: 0000000000000202
R12: 0000000000000012
12194 │ [14299.727024] R13: 00005623af2376b0 R14: 0000000000000000
R15: 00005623af269f70
12195 │ [14299.727033] </TASK>
12196 │ [14299.727037] Modules linked in: ccm(E) nls_utf8(E) cifs(E)
nls_ucs2_utils(E) cifs_md4(E) dns_resolver(E) netfs(E) rfcomm(E)
snd_seq_du
│ mmy(E) snd_hrtimer(E) input_leds(E) hid_apple(E)
hid_generic(E) algif_hash(E) algif_skcipher(E) af_alg(E) ovpn(E)
ip6_udp_tunnel(E) udp_
│ tunnel(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E)
intel_rapl_msr(E) intel_rapl_common(E) x86_pkg_temp_thermal(E)
intel_powerclamp(E
│ ) coretemp(E) kvm_intel(E) iwlmvm(E) rtsx_usb_ms(E) kvm(E)
at24(E) rtsx_usb_sdmmc(E) memstick(E) iTCO_wdt(E) spi_intel_platform(E)
spi_i
│ ntel(E) mac80211(E) intel_pmc_bxt(E) irqbypass(E) mei_pxp(E)
mei_hdcp(E) rapl(E) libarc4(E) intel_cstate(E) intel_uncore(E) evdev(E)
pcs
│ pkr(E) mac_hid(E) snd_usb_audio(E) iwlwifi(E) snd_ctl_led(E)
snd_hda_codec_alc269(E) snd_usbmidi_lib(E) i2c_i801(E) snd_rawmidi(E)
btusb
│ (E) snd_hda_codec_realtek_lib(E) snd_hda_codec_intelhdmi(E)
snd_hda_scodec_component(E) btbcm(E) i2c_smbus(E)
snd_hda_codec_generic(E) r
│ tsx_usb(E) mc(E) snd_hda_codec_hdmi(E) btmtk(E) i2c_mux(E)
btrtl(E) snd_hda_intel(E)
12197 │ [14299.727186] btintel(E) r8169(E) cfg80211(E)
intel_pmc_core(E) i2c_designware_platform(E) snd_hda_codec(E)
pmt_telemetry(E) realtek(E
│ ) i2c_designware_core(E) phy_package(E) pmt_discovery(E)
snd_hda_core(E) snd_intel_dspcfg(E) ccp(E) pmt_class(E)
intel_pmc_ssram_telemet
│ ry(E) snd_intel_sdw_acpi(E) snd_hwdep(E) intel_vsec(E)
rng_core(E) mei_me(E) acpi_pad(E) ac(E) tiny_power_button(E) lpc_ich(E)
mei(E) sn
│ d_pcm(E) dm_raid(E) raid456(E) md_mod(E) async_raid6_recov(E)
async_memcpy(E) async_pq(E) async_xor(E) async_tx(E) snd_seq(E)
snd_seq_de
│ vice(E) snd_timer(E) snd(E) soundcore(E) vhost_vsock(E)
vmw_vsock_virtio_transport_common(E) vsock(E) vhost_net(E) vhost(E)
vhost_iotlb(
│ E) tap(E) hci_vhci(E) bluetooth(E) rfkill(E) ecdh_generic(E)
ecc(E) crc16(E) vfio_iommu_type1(E) vfio(E) iommufd(E) uhid(E) hid(E)
uinpu
│ t(E) userio(E) ppp_generic(E) slhc(E) tun(E) loop(E) nvram(E)
cuse(E) fuse(E) i915(E) intel_gtt(E) drm_buddy(E) sd_mod(E) ttm(E)
agpgart
│ (E) i2c_algo_bit(E) drm_display_helper(E) ahci(E) cec(E)
xhci_pci(E) rc_core(E)
12198 │ [14299.727346] ehci_pci(E) libahci(E) xhci_hcd(E)
drm_client_lib(E) ehci_hcd(E) libata(E) aesni_intel(E)
drm_kms_helper(E) video(E) gf1
│ 28mul(E) usbcore(E) scsi_mod(E) aead(E) wmi(E) scsi_common(E)
drm(E) usb_common(E) sdhci_acpi(E) sdhci(E) dw_dmac(E) mmc_core(E)
dw_dmac
│ _core(E) pinctrl_lynxpoint(E) button(E) dm_mirror(E)
dm_region_hash(E) dm_log(E) dm_mod(E) btrfs(E) libblake2b(E)
raid6_pq(E) xor(E)
12199 │ [14299.727414] Unloaded tainted modules: acpi_cpufreq(E):1
fjes(E):2
12200 │ [14299.727431] CR2: ffffffffffffffe4
12201 │ [14299.727437] ---[ end trace 0000000000000000 ]---
12202 │ [14299.727443] RIP: 0010:hidinput_hid_event+0x321/0x910 [hid]
12203 │ [14299.727458] Code: 00 41 8b 57 30 48 8d 68 c8 48 39 c7 75
1c e9 17 fe ff ff 66 0f 1f 44 00 00 48 8b 45 38 48 8d 68 c8 48 39 c7 0f
84 0
│ 0 fe ff ff <3b> 55 1c 75 ea 48 85 ed 0f 84 f2 fd ff ff 8b 03
3d 44 00 85 00 0f
12204 │ [14299.727464] RSP: 0018:ffffd392026c7ae0 EFLAGS: 00010286
12205 │ [14299.727471] RAX: 0000000000000000 RBX: ffff8a7a9a783da4
RCX: 0000000000000000
12206 │ [14299.727476] RDX: 0000000000000090 RSI: 0000000000000016
RDI: ffff8a7a9bccdc18
12207 │ [14299.727481] RBP: ffffffffffffffc8 R08: 0000000000000000
R09: ffff8a7a95e1c800
12208 │ [14299.727485] R10: 0000000000000014 R11: ffff8a7a9a783238
R12: ffff8a7a9bccc000
12209 │ [14299.727490] R13: ffff8a7a9a783da4 R14: 0000000000000000
R15: ffff8a7a95d2f000
12210 │ [14299.727495] FS: 00007fe112863540(0000)
GS:ffff8a7e2799c000(0000) knlGS:0000000000000000
12211 │ [14299.727501] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
12212 │ [14299.727506] CR2: ffffffffffffffe4 CR3: 00000001157e6006
CR4: 00000000003726f0
12213 │ [14299.727512] note: bluetoothd[722] exited with irqs disabled
12214 │
[7.] Small shell script or example program which triggers the problem:
No script needed — rapid typing on the keyboard for 30-60 seconds
triggers
the crash. No special application required.
[8.] Environment
[8.1.] Software:
Distribution: Void Linux
Kernel: 7.1.0-rc2-custom (self-built)
Driver: hid-apple (bound to keyboard), btusb (Bluetooth)
[8.2.] Processor information:processor
cpu: 0
vendor_id : GenuineIntel
cpu family : 6
model : 61
model name : Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz
stepping : 4
microcode : 0x24
cpu MHz : 1696.096
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 20
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl
xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor
ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2
x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch
cpuid_fault epb tpr_shadow flexpriority ept vpid ept_ad fsgsbase
tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap intel_pt
xsaveopt dtherm arat pln pts vnmi
vmx flags : vnmi preemption_timer invvpid ept_x_only ept_ad ept_1gb
flexpriority tsc_offset vtpr mtf vapic ept vpid unrestricted_guest ple
ept_violation_ve
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds
swapgs itlb_multihit srbds spectre_v2_user old_microcode vmscape
bogomips : 3990.76
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
power management:
CPU:
Hardware: BESSTAR (HK) LIMITED U500-H/VB9, BIOS 0.010 04/07/2020
[8.3.] Module information:
hid-apple, hid-generic, btusb, bluetooth, hid
[8.4.] USB information:
Bus 002 Device 002: ID 0a5c:21e8 Broadcom Corp. BCM20702A0 Bluetooth 4.0
Bus 002 Device 005: ID 8087:0a2a Intel Corp. Bluetooth wireless
interface (disabled) the bug occurs when this controler is used as well.
[8.5.] Bluetooth controller information:
Controller 5C:F3:70:A2:F8:56 (public) — Broadcom dongle
Keyboard MAC: 10:94:BB:AE:04:64
[9.] Other notes:
Additional observations:
- The crash occurs more frequently during RAPID typing. Normal-speed
typing (30-40 WPM)
does not seem to trigger the crash as much.
- The mouse (Bluetooth Mouse 4.0) does not cause crashes even during
rapid
movement.
- The internal Intel Bluetooth adapter is disabled via udev rule; only
the
Broadcom dongle is active.
- The hid-apple driver is confirmed to be bound to the keyboard:
/sys/bus/hid/devices/0005:004C:026C.0007/driver ->
../../../../../bus/hid/drivers/apple
Potential related issues:
- This Oops appears similar to historical HID bugs where feature reports
without hidinput pointers cause NULL dereferences[citation:1]
- The crash address ffffffffffffffe4 suggests an offset from NULL (0 -
0x1c)
Workarounds attempted (none fully successful):
1. Switching between hid-apple and hid-generic drivers
2. Disabling KernelExperimental = true in /etc/bluetooth/main.conf
3. Using different Bluetooth adapter (Broadcom vs internal Intel)
[X.] Other notes:
I am willing to test patches and provide additional debugging
information.
The crash is fairly reproducible on demand within 10-20 minutes of
testing.
Regards,
Michel Barthelemy
Attached: Full .config and useful data dumps
[-- Attachment #1.2: Type: text/html, Size: 17403 bytes --]
[-- Attachment #2: hid-bug-info.txt --]
[-- Type: text/plain, Size: 297695 bytes --]
Linux void500 7.1.0-rc2-custom #1 SMP PREEMPT_DYNAMIC Tue May 5 09:34:05 CEST 2026 x86_64 GNU/Linux
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 7.1.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (GCC) 14.2.1 20250405"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=140201
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24400
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=24400
CONFIG_LLD_VERSION=0
CONFIG_RUSTC_VERSION=0
CONFIG_RUSTC_LLVM_VERSION=0
CONFIG_RUSTC_LLVM_MAJOR_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_ASSUME=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY=y
CONFIG_PAHOLE_VERSION=131
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="-custom"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_ARCH_WANTS_CLOCKSOURCE_READ_INLINE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST_IDLE=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CLOCKEVENTS_COUPLED=y
CONFIG_GENERIC_CLOCKEVENTS_COUPLED_INLINE=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HRTIMER_REARM_DEFERRED=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING_USER=y
# CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_POSIX_AUX_CLOCKS is not set
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
CONFIG_BPF_PRELOAD=y
CONFIG_BPF_PRELOAD_UMD=m
CONFIG_BPF_LSM=y
# end of BPF subsystem
CONFIG_PREEMPT_BUILD=y
CONFIG_ARCH_HAS_PREEMPT_LAZY=y
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_LAZY is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
CONFIG_SCHED_CORE=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_NEED_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set
CONFIG_RCU_LAZY=y
# CONFIG_RCU_LAZY_DEFAULT_OFF is not set
# end of RCU Subsystem
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=m
CONFIG_LOG_BUF_SHIFT=19
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_INDEX=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_CC_MS_EXTENSIONS="-fms-extensions"
CONFIG_GCC10_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
CONFIG_CC_NO_STRINGOP_OVERFLOW=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_SLAB_OBJ_EXT=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_V1=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_GROUP_SCHED_WEIGHT=y
CONFIG_GROUP_SCHED_BANDWIDTH=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_SCHED_MM_CID=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_DMEM is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_CPUSETS_V1=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_TIME_NS_VDSO=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
# CONFIG_BOOT_CONFIG_FORCE is not set
# CONFIG_BOOT_CONFIG_EMBED is not set
CONFIG_CMDLINE_LOG_WRAP_IDEAL_LEN=1021
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_FUTEX_PRIVATE_HASH=y
CONFIG_FUTEX_MPOL=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_RSEQ_SLICE_EXTENSION is not set
CONFIG_CACHESTAT_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
CONFIG_PERF_GUEST_MEDIATED_PMU=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
#
# Kexec and crash features
#
CONFIG_CRASH_RESERVE=y
CONFIG_VMCORE_INFO=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_SIG=y
# CONFIG_KEXEC_SIG_FORCE is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_CRASH_DUMP=y
# CONFIG_CRASH_DM_CRYPT is not set
CONFIG_CRASH_HOTPLUG=y
CONFIG_CRASH_MAX_MEMORY_RANGES=8192
# end of Kexec and crash features
#
# Live Update and Kexec HandOver
#
# CONFIG_KEXEC_HANDOVER is not set
# end of Live Update and Kexec HandOver
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
# CONFIG_AMD_SECURE_AVIC is not set
# CONFIG_X86_POSTED_MSI is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_FRED=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_XXL=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_512GB=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_PV_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_PVHVM_GUEST=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_XEN_PVH=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PV_MSR_SAFE=y
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_BHYVE_GUEST is not set
CONFIG_INTEL_TDX_GUEST=y
CONFIG_CC_HAS_MARCH_NATIVE=y
# CONFIG_X86_NATIVE_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_HAVE_PAE=y
CONFIG_X86_CX8=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_BROADCAST_TLB_FLUSH=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_BOOT_VESA_SUPPORT=y
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=256
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_ACPI_MADT_WAKEUP=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
CONFIG_PERF_EVENTS_AMD_POWER=m
CONFIG_PERF_EVENTS_AMD_UNCORE=m
CONFIG_PERF_EVENTS_AMD_BRS=y
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_LATE_LOADING is not set
# CONFIG_MICROCODE_DBG is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_X86_MEM_ENCRYPT=y
CONFIG_AMD_MEM_ENCRYPT=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
CONFIG_X86_CET=y
CONFIG_X86_KERNEL_IBT=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_ARCH_PKEY_BITS=4
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
CONFIG_X86_USER_SHADOW_STACK=y
# CONFIG_INTEL_TDX_HOST is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_HANDOVER_PROTOCOL=y
CONFIG_EFI_MIXED=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SUPPORTS_KEXEC=y
CONFIG_ARCH_SUPPORTS_KEXEC_FILE=y
CONFIG_ARCH_SELECTS_KEXEC_FILE=y
CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_SIG_FORCE=y
CONFIG_ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_ARCH_SUPPORTS_KEXEC_JUMP=y
CONFIG_ARCH_SUPPORTS_KEXEC_HANDOVER=y
CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y
CONFIG_ARCH_DEFAULT_CRASH_DUMP=y
CONFIG_ARCH_SUPPORTS_CRASH_HOTPLUG=y
CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
CONFIG_LEGACY_VSYSCALL_NONE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_HAVE_KLP_BUILD=y
CONFIG_X86_BUS_LOCK_DETECT=y
# end of Processor type and features
CONFIG_CC_HAS_NAMED_AS=y
CONFIG_CC_HAS_NAMED_AS_FIXED_SANITIZERS=y
CONFIG_USE_X86_SEG_SUPPORT=y
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_CC_HAS_ENTRY_PADDING=y
CONFIG_FUNCTION_PADDING_CFI=11
CONFIG_FUNCTION_PADDING_BYTES=16
CONFIG_CALL_PADDING=y
CONFIG_HAVE_CALL_THUNKS=y
CONFIG_CALL_THUNKS=y
CONFIG_PREFIX_SYMBOLS=y
CONFIG_CPU_MITIGATIONS=y
CONFIG_MITIGATION_PAGE_TABLE_ISOLATION=y
CONFIG_MITIGATION_RETPOLINE=y
CONFIG_MITIGATION_RETHUNK=y
CONFIG_MITIGATION_UNRET_ENTRY=y
CONFIG_MITIGATION_CALL_DEPTH_TRACKING=y
# CONFIG_CALL_THUNKS_DEBUG is not set
CONFIG_MITIGATION_IBPB_ENTRY=y
CONFIG_MITIGATION_IBRS_ENTRY=y
CONFIG_MITIGATION_SRSO=y
# CONFIG_MITIGATION_SLS is not set
CONFIG_MITIGATION_GDS=y
CONFIG_MITIGATION_RFDS=y
CONFIG_MITIGATION_SPECTRE_BHI=y
CONFIG_MITIGATION_MDS=y
CONFIG_MITIGATION_TAA=y
CONFIG_MITIGATION_MMIO_STALE_DATA=y
CONFIG_MITIGATION_L1TF=y
CONFIG_MITIGATION_RETBLEED=y
CONFIG_MITIGATION_SPECTRE_V1=y
CONFIG_MITIGATION_SPECTRE_V2=y
CONFIG_MITIGATION_SRBDS=y
CONFIG_MITIGATION_SSB=y
CONFIG_MITIGATION_ITS=y
CONFIG_MITIGATION_TSA=y
CONFIG_MITIGATION_VMSCAPE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_HIBERNATION_COMP_LZO=y
# CONFIG_HIBERNATION_COMP_LZ4 is not set
CONFIG_HIBERNATION_DEF_COMP="lzo"
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_QOS_CPU_SYSTEM_WAKEUP is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_ENERGY_MODEL=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_THERMAL_LIB=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_FPDT=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_TINY_POWER_BUTTON=m
CONFIG_ACPI_TINY_POWER_BUTTON_SIGNAL=38
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_PLATFORM_PROFILE=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_NHLT=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_GHES_NVIDIA is not set
CONFIG_ACPI_APEI_ERST_DEBUG=m
CONFIG_ACPI_DPTF=y
CONFIG_DPTF_POWER=m
CONFIG_DPTF_PCH_FIVR=m
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
CONFIG_ACPI_CONFIGFS=m
CONFIG_ACPI_PFRUT=m
CONFIG_ACPI_PCC=y
CONFIG_ACPI_FFH=y
CONFIG_ACPI_MRRM=y
CONFIG_PMIC_OPREGION=y
CONFIG_XPOWER_PMIC_OPREGION=y
CONFIG_TPS68470_PMIC_OPREGION=y
CONFIG_ACPI_VIOT=y
CONFIG_ACPI_PRMT=y
CONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_AMD_PSTATE=y
CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
# CONFIG_X86_AMD_PSTATE_DYNAMIC_EPP is not set
CONFIG_X86_AMD_PSTATE_UT=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPUFREQ_ARCH_CUR_FREQ=y
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
CONFIG_CPU_IDLE_GOV_HALTPOLL=y
CONFIG_HALTPOLL_CPUIDLE=m
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_AMD_NODE=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_EMULATION_DEFAULT_DISABLED is not set
# CONFIG_X86_X32_ABI is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations
CONFIG_KVM_COMMON=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_DIRTY_RING_TSO=y
CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_READONLY_MEM=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_GENERIC_PRE_FAULT_MEMORY=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=m
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_VIRT_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_KVM_GENERIC_HARDWARE_ENABLING=y
CONFIG_KVM_ELIDE_TLB_FLUSH_IF_YOUNG=y
CONFIG_KVM_MMU_LOCKLESS_AGING=y
CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES=y
CONFIG_KVM_GUEST_MEMFD=y
CONFIG_HAVE_KVM_ARCH_GMEM_PREPARE=y
CONFIG_HAVE_KVM_ARCH_GMEM_INVALIDATE=y
CONFIG_HAVE_KVM_ARCH_GMEM_POPULATE=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM_X86=m
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_AMD_SEV=y
CONFIG_KVM_IOAPIC=y
CONFIG_KVM_SMM=y
CONFIG_KVM_HYPERV=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM_EXTERNAL_WRITE_TRACKING=y
CONFIG_KVM_MAX_NR_VCPUS=1024
CONFIG_X86_REQUIRED_FEATURE_ALWAYS=y
CONFIG_X86_REQUIRED_FEATURE_NOPL=y
CONFIG_X86_REQUIRED_FEATURE_CX8=y
CONFIG_X86_REQUIRED_FEATURE_CMOV=y
CONFIG_X86_REQUIRED_FEATURE_CPUID=y
CONFIG_X86_REQUIRED_FEATURE_FPU=y
CONFIG_X86_REQUIRED_FEATURE_PAE=y
CONFIG_X86_REQUIRED_FEATURE_MSR=y
CONFIG_X86_REQUIRED_FEATURE_FXSR=y
CONFIG_X86_REQUIRED_FEATURE_XMM=y
CONFIG_X86_REQUIRED_FEATURE_XMM2=y
CONFIG_X86_REQUIRED_FEATURE_LM=y
CONFIG_X86_DISABLED_FEATURE_VME=y
CONFIG_X86_DISABLED_FEATURE_K6_MTRR=y
CONFIG_X86_DISABLED_FEATURE_CYRIX_ARR=y
CONFIG_X86_DISABLED_FEATURE_CENTAUR_MCR=y
CONFIG_X86_DISABLED_FEATURE_LAM=y
CONFIG_X86_DISABLED_FEATURE_SGX=y
CONFIG_AS_WRUSS=y
CONFIG_ARCH_CONFIGURES_CPU_MITIGATIONS=y
CONFIG_ARCH_HAS_DMA_OPS=y
#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_ARCH_SUPPORTS_SCHED_SMT=y
CONFIG_ARCH_SUPPORTS_SCHED_CLUSTER=y
CONFIG_ARCH_SUPPORTS_SCHED_MC=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_MC=y
CONFIG_HOTPLUG_CORE_SYNC=y
CONFIG_HOTPLUG_CORE_SYNC_DEAD=y
CONFIG_HOTPLUG_CORE_SYNC_FULL=y
CONFIG_HOTPLUG_SPLIT_STARTUP=y
CONFIG_HOTPLUG_PARALLEL=y
CONFIG_GENERIC_IRQ_ENTRY=y
CONFIG_GENERIC_SYSCALL=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_ARCH_HAS_CPU_FINALIZE_INIT=y
CONFIG_ARCH_HAS_CPU_PASID=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_UNWIND_USER=y
CONFIG_HAVE_UNWIND_USER_FP=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAVE_EXTRA_ELF_NOTES=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_KSTACK_ERASE=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_AUTOFDO_CLANG=y
CONFIG_ARCH_SUPPORTS_PROPELLER_CLANG=y
CONFIG_ARCH_SUPPORTS_CFI=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_PV_STEAL_CLOCK_GEN=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_PMD_MKWRITE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_EXECMEM_ROX=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SHIFT=12
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_SUPPORTS_RT=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_CPU_RESCTRL=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_HAS_CC_PLATFORM=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
CONFIG_ARCH_HAS_HW_PTE_YOUNG=y
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
CONFIG_ARCH_HAS_KERNEL_FPU_SUPPORT=y
CONFIG_ARCH_VMLINUX_NEEDS_RELOCS=y
CONFIG_HAVE_GENERIC_TIF_BITS=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT_16B=y
CONFIG_FUNCTION_ALIGNMENT=16
CONFIG_CC_HAS_MIN_FUNCTION_ALIGNMENT=y
CONFIG_CC_HAS_SANE_FUNCTION_ALIGNMENT=y
CONFIG_ARCH_HAS_CPU_ATTACK_VECTORS=y
CONFIG_HAVE_ARCH_GET_SECUREBOOT=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_DEBUGFS=y
# CONFIG_MODULE_DEBUG is not set
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_UNLOAD_TAINT_TRACKING=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
# CONFIG_MODULE_SIG_ALL is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
CONFIG_MODULE_SIG_SHA512=y
# CONFIG_MODULE_SIG_SHA3_256 is not set
# CONFIG_MODULE_SIG_SHA3_384 is not set
# CONFIG_MODULE_SIG_SHA3_512 is not set
CONFIG_MODULE_SIG_HASH="sha512"
CONFIG_MODULE_COMPRESS=y
CONFIG_MODULE_COMPRESS_GZIP=y
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_COMPRESS_ALL is not set
CONFIG_MODULE_DECOMPRESS=y
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_CGROUP_PUNT_BIO=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_WRITE_MOUNTED=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_CGROUP_IOLATENCY=y
CONFIG_BLK_CGROUP_FC_APPID=y
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_CGROUP_IOPRIO=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_SHRINKER_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSMALLOC=y
#
# Zsmalloc allocator options
#
#
# Zsmalloc is a common backend allocator for zswap & zram
#
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_ZSMALLOC_CHAIN_SIZE=8
# end of Zsmalloc allocator options
#
# Slab allocator options
#
CONFIG_SLUB=y
CONFIG_KVFREE_RCU_BATCHED=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
CONFIG_SLAB_BUCKETS=y
# CONFIG_SLUB_STATS is not set
# CONFIG_RANDOM_KMALLOC_CACHES is not set
# end of Slab allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPARSEMEM_VMEMMAP_PREINIT=y
CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=y
CONFIG_ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP=y
CONFIG_ARCH_WANT_HUGETLB_VMEMMAP_PREINIT=y
CONFIG_HAVE_GUP_FAST=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MHP_DEFAULT_ONLINE_TYPE_OFFLINE=y
# CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_AUTO is not set
# CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_KERNEL is not set
# CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
CONFIG_SPLIT_PTE_PTLOCKS=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_SPLIT_PMD_PTLOCKS=y
CONFIG_BALLOON=y
CONFIG_BALLOON_MIGRATION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_NUMA_MIGRATION=y
CONFIG_MIGRATION=y
CONFIG_DEVICE_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PCP_BATCH_SCALE_MAX=5
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
# CONFIG_PERSISTENT_HUGE_ZERO_FOLIO is not set
CONFIG_MM_ID=y
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_TRANSPARENT_HUGEPAGE_NEVER is not set
CONFIG_TRANSPARENT_HUGEPAGE_SHMEM_HUGE_NEVER=y
# CONFIG_TRANSPARENT_HUGEPAGE_SHMEM_HUGE_ALWAYS is not set
# CONFIG_TRANSPARENT_HUGEPAGE_SHMEM_HUGE_WITHIN_SIZE is not set
# CONFIG_TRANSPARENT_HUGEPAGE_SHMEM_HUGE_ADVISE is not set
CONFIG_TRANSPARENT_HUGEPAGE_TMPFS_HUGE_NEVER=y
# CONFIG_TRANSPARENT_HUGEPAGE_TMPFS_HUGE_ALWAYS is not set
# CONFIG_TRANSPARENT_HUGEPAGE_TMPFS_HUGE_WITHIN_SIZE is not set
# CONFIG_TRANSPARENT_HUGEPAGE_TMPFS_HUGE_ADVISE is not set
CONFIG_THP_SWAP=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
# CONFIG_NO_PAGE_MAPCOUNT is not set
CONFIG_PAGE_MAPCOUNT=y
CONFIG_PGTABLE_HAS_HUGE_LEAVES=y
CONFIG_HAVE_GIGANTIC_FOLIOS=y
CONFIG_ASYNC_KERNEL_PGTABLE_FREE=y
CONFIG_ARCH_SUPPORTS_HUGE_PFNMAP=y
CONFIG_ARCH_SUPPORTS_PMD_PFNMAP=y
CONFIG_ARCH_SUPPORTS_PUD_PFNMAP=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_SYSFS=y
CONFIG_CMA_AREAS=19
CONFIG_PAGE_BLOCK_MAX_ORDER=10
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_HMM_MIRROR=y
CONFIG_GET_FREE_REGION=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_ARCH_USES_PG_ARCH_2=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
CONFIG_MEMFD_CREATE=y
CONFIG_SECRETMEM=y
CONFIG_ANON_VMA_NAME=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_USERFAULTFD=y
CONFIG_PTE_MARKER_UFFD_WP=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set
CONFIG_LRU_GEN_WALKS_MMU=y
CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y
CONFIG_PER_VMA_LOCK=y
CONFIG_LOCK_MM_AND_FIND_VMA=y
CONFIG_IOMMU_MM_DATA=y
CONFIG_EXECMEM=y
CONFIG_NUMA_MEMBLKS=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_HAS_USER_SHADOW_STACK=y
CONFIG_PT_RECLAIM=y
CONFIG_FIND_NORMAL_PAGE=y
CONFIG_ARCH_HAS_LAZY_MMU_MODE=y
#
# Data Access Monitoring
#
CONFIG_DAMON=y
# CONFIG_DAMON_DEBUG_SANITY is not set
CONFIG_DAMON_VADDR=y
CONFIG_DAMON_PADDR=y
CONFIG_DAMON_SYSFS=y
CONFIG_DAMON_RECLAIM=y
# CONFIG_DAMON_LRU_SORT is not set
# CONFIG_DAMON_STAT is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_XGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_DECRYPTED=y
CONFIG_SKB_EXTENSIONS=y
CONFIG_NET_DEVMEM=y
CONFIG_NET_SHAPER=y
CONFIG_NET_CRC32C=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
# CONFIG_INET_PSP is not set
CONFIG_UNIX=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_USER_COMPAT is not set
CONFIG_XFRM_INTERFACE=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_XFRM_IPTFS is not set
CONFIG_XFRM_ESPINTCP=y
# CONFIG_DIBS is not set
CONFIG_XDP_SOCKETS=y
CONFIG_XDP_SOCKETS_DIAG=m
CONFIG_NET_HANDSHAKE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
CONFIG_INET_ESPINTCP=y
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_AO is not set
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_ESPINTCP=y
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
CONFIG_IPV6_IOAM6_LWTUNNEL=y
CONFIG_NETLABEL=y
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=m
CONFIG_MPTCP_IPV6=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_BPF_LINK=y
CONFIG_NETFILTER_NETLINK_HOOK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CONNTRACK_OVS=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NF_NAT_OVS=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
# CONFIG_NFT_EXTHDR_DCCP is not set
CONFIG_NFT_FLOW_OFFLOAD=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_TUNNEL=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NFT_REJECT_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NF_FLOW_TABLE_PROCFS=y
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XTABLES_COMPAT=y
CONFIG_NETFILTER_XTABLES_LEGACY=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_MH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_TWOS=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_IP_NF_IPTABLES_LEGACY=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_NFT_COMPAT_ARP=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_IPTABLES_LEGACY=m
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA256=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BRIDGE_MRP=y
CONFIG_BRIDGE_CFM=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_NONE=m
CONFIG_NET_DSA_TAG_AR9331=m
CONFIG_NET_DSA_TAG_BRCM_COMMON=m
CONFIG_NET_DSA_TAG_BRCM=m
CONFIG_NET_DSA_TAG_BRCM_LEGACY=m
CONFIG_NET_DSA_TAG_BRCM_LEGACY_FCS=m
CONFIG_NET_DSA_TAG_BRCM_PREPEND=m
CONFIG_NET_DSA_TAG_HELLCREEK=m
CONFIG_NET_DSA_TAG_GSWIP=m
CONFIG_NET_DSA_TAG_DSA_COMMON=m
CONFIG_NET_DSA_TAG_DSA=m
CONFIG_NET_DSA_TAG_EDSA=m
CONFIG_NET_DSA_TAG_MTK=m
# CONFIG_NET_DSA_TAG_MXL_862XX is not set
# CONFIG_NET_DSA_TAG_MXL_GSW1XX is not set
CONFIG_NET_DSA_TAG_KSZ=m
CONFIG_NET_DSA_TAG_OCELOT=m
CONFIG_NET_DSA_TAG_OCELOT_8021Q=m
CONFIG_NET_DSA_TAG_QCA=m
CONFIG_NET_DSA_TAG_RTL4_A=m
CONFIG_NET_DSA_TAG_RTL8_4=m
CONFIG_NET_DSA_TAG_RZN1_A5PSW=m
CONFIG_NET_DSA_TAG_LAN9303=m
CONFIG_NET_DSA_TAG_SJA1105=m
CONFIG_NET_DSA_TAG_TRAILER=m
CONFIG_NET_DSA_TAG_VSC73XX_8021Q=m
CONFIG_NET_DSA_TAG_XRS700X=m
# CONFIG_NET_DSA_TAG_YT921X is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_CBS=m
CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_MQPRIO_LIB=m
CONFIG_NET_SCH_TAPRIO=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_SKBPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_CAKE=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_FQ_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_SCH_ETS=m
# CONFIG_NET_SCH_DUALPI2 is not set
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_EMATCH_IPT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_MPLS=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_CTINFO=m
CONFIG_NET_ACT_SKBMOD=m
CONFIG_NET_ACT_IFE=m
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_ACT_CT=m
CONFIG_NET_ACT_GATE=m
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=m
CONFIG_HSR=m
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
CONFIG_QRTR_MHI=m
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_MAX_SKB_FRAGS=17
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=m
# end of Network testing
# end of Networking options
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
CONFIG_BT_6LOWPAN=m
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_QCA=m
CONFIG_BT_MTK=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_POLL_SYNC=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
# CONFIG_BT_HCIUART_AML is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBCM4377=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_MTKSDIO=m
CONFIG_BT_MTKUART=m
CONFIG_BT_HCIRSI=m
CONFIG_BT_VIRTIO=m
CONFIG_BT_NXPUART=m
CONFIG_BT_INTEL_PCIE=m
# end of Bluetooth device drivers
CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_IPV6=y
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_INJECT_RX_DELAY is not set
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
# CONFIG_RXGK is not set
# CONFIG_RXPERF is not set
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_MCTP_FLOWS=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_XEN=m
# CONFIG_NET_9P_USBG is not set
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_MEI_PHY=m
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
CONFIG_NFC_VIRTUAL_NCI=m
CONFIG_NFC_FDP=m
CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN544_MEI=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_USB=m
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_PN532_UART=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
CONFIG_NFC_MICROREAD_MEI=m
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
CONFIG_NFC_MRVL_UART=m
CONFIG_NFC_MRVL_I2C=m
CONFIG_NFC_MRVL_SPI=m
CONFIG_NFC_ST21NFCA=m
CONFIG_NFC_ST21NFCA_I2C=m
CONFIG_NFC_ST_NCI=m
CONFIG_NFC_ST_NCI_I2C=m
CONFIG_NFC_ST_NCI_SPI=m
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
CONFIG_NFC_S3FWRN82_UART=m
CONFIG_NFC_ST95HF=m
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_IEEE8021Q_HELPERS=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_PAGE_POOL_STATS=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
CONFIG_PCIE_PTM=y
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=m
CONFIG_PCI_PF_STUB=m
CONFIG_XEN_PCIDEV_FRONTEND=m
CONFIG_PCI_ATS=y
CONFIG_PCI_IDE=y
CONFIG_PCI_TSM=y
CONFIG_PCI_DOE=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_NPEM is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCIE_TPH is not set
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
# CONFIG_HOTPLUG_PCI_OCTEONEP is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
CONFIG_PCI_HOST_COMMON=y
CONFIG_VMD=m
CONFIG_PCI_HYPERV_INTERFACE=m
#
# Cadence-based PCIe controllers
#
# end of Cadence-based PCIe controllers
#
# DesignWare-based PCIe controllers
#
CONFIG_PCIE_DW=y
# CONFIG_PCIE_DW_DEBUGFS is not set
CONFIG_PCIE_DW_HOST=y
CONFIG_PCI_MESON=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
# end of DesignWare-based PCIe controllers
#
# Mobiveil-based PCIe controllers
#
# end of Mobiveil-based PCIe controllers
#
# PLDA-based PCIe controllers
#
# end of PLDA-based PCIe controllers
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers
# CONFIG_PCI_PWRCTRL_GENERIC is not set
# CONFIG_PCI_PWRCTRL_TC9563 is not set
# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_RAPIDIO=m
CONFIG_RAPIDIO_TSI721=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_CHMAN=m
CONFIG_RAPIDIO_MPORT_CDEV=m
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_CPS_GEN2=m
CONFIG_RAPIDIO_RXS_GEN3=m
# end of RapidIO Switch drivers
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_DRIVER_DEFERRED_PROBE_TIMEOUT=10
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_DEBUG=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
CONFIG_FW_CACHE=y
CONFIG_FW_UPLOAD=y
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_HMEM_REPORTING=y
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_W1=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_SOUNDWIRE_MBQ=m
CONFIG_REGMAP_I3C=m
CONFIG_REGMAP_SPI_AVMM=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
# end of Generic Driver Options
#
# Bus devices
#
CONFIG_MHI_BUS=m
# CONFIG_MHI_BUS_DEBUG is not set
# CONFIG_MHI_BUS_PCI_GENERIC is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
CONFIG_FW_CS_DSP=m
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_SOFT_RESERVE=y
CONFIG_EFI_DXE_MEM_ATTRIBUTES=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_BOOTLOADER_CONTROL=m
CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_EFI_TEST=m
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_APPLE_PROPERTIES=y
CONFIG_RESET_ATTACK_MITIGATION=y
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set
# CONFIG_OVMF_DEBUG_LOG is not set
CONFIG_UNACCEPTED_MEMORY=y
CONFIG_EFI_EMBEDDED_FIRMWARE=y
CONFIG_EFI_SBAT_FILE=""
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
#
# Qualcomm firmware drivers
#
# end of Qualcomm firmware drivers
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_FWCTL is not set
CONFIG_GNSS=m
CONFIG_GNSS_SERIAL=m
CONFIG_GNSS_MTK_SERIAL=m
CONFIG_GNSS_SIRF_SERIAL=m
CONFIG_GNSS_UBX_SERIAL=m
CONFIG_GNSS_USB=m
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
#
# Partition parsers
#
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_PSTORE is not set
CONFIG_MTD_SWAP=m
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
CONFIG_MTD_MCHP48L640=m
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=m
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
# CONFIG_MTD_INTEL_DG is not set
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers
#
# NAND
#
CONFIG_MTD_NAND_CORE=m
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_RAW_NAND=m
#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=m
CONFIG_MTD_NAND_DENALI_PCI=m
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_MXIC=m
CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_NAND_ARASAN=m
#
# Misc
#
CONFIG_MTD_SM_COMMON=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_SPI_NAND=m
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_MXIC=y
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
# CONFIG_MTD_SPI_NOR is not set
# CONFIG_MTD_UBI is not set
# CONFIG_MTD_HYPERBUS is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_FD_RAWCMD is not set
CONFIG_CDROM=m
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
CONFIG_ZRAM_BACKEND_LZ4=y
CONFIG_ZRAM_BACKEND_LZ4HC=y
CONFIG_ZRAM_BACKEND_ZSTD=y
# CONFIG_ZRAM_BACKEND_DEFLATE is not set
CONFIG_ZRAM_BACKEND_842=y
CONFIG_ZRAM_BACKEND_LZO=y
# CONFIG_ZRAM_DEF_COMP_LZORLE is not set
CONFIG_ZRAM_DEF_COMP_LZO=y
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_842 is not set
CONFIG_ZRAM_DEF_COMP="lzo"
CONFIG_ZRAM_WRITEBACK=y
# CONFIG_ZRAM_TRACK_ENTRY_ACTIME is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
CONFIG_ZRAM_MULTI_COMP=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_XEN_BLKDEV_BACKEND=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_UBLK is not set
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=m
CONFIG_BLK_DEV_RNBD_SERVER=m
# CONFIG_BLK_DEV_ZONED_LOOP is not set
#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
CONFIG_NVME_TCP=m
# CONFIG_NVME_TCP_TLS is not set
# CONFIG_NVME_HOST_AUTH is not set
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_DEBUGFS is not set
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
CONFIG_NVME_TARGET_TCP=m
# CONFIG_NVME_TARGET_TCP_TLS is not set
# CONFIG_NVME_TARGET_AUTH is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
CONFIG_DUMMY_IRQ=m
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=m
# CONFIG_RPMB is not set
# CONFIG_TI_FPC202 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SMPRO_ERRMON=m
CONFIG_SMPRO_MISC=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_VMWARE_BALLOON=m
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
CONFIG_DW_XDATA_PCIE=m
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
CONFIG_NTSYNC=y
# CONFIG_NSM is not set
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=m
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_EEPROM_EE1004=m
# CONFIG_EEPROM_M24LR is not set
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
CONFIG_INTEL_MEI_GSC=m
# CONFIG_INTEL_MEI_CSC is not set
# CONFIG_INTEL_MEI_VSC_HW is not set
# CONFIG_INTEL_MEI_LB is not set
CONFIG_INTEL_MEI_HDCP=m
CONFIG_INTEL_MEI_PXP=m
# CONFIG_INTEL_MEI_GSC_PROXY is not set
CONFIG_VMWARE_VMCI=m
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
# CONFIG_BCM_VK is not set
CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=m
CONFIG_MISC_RTSX_USB=m
CONFIG_UACCE=m
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
CONFIG_PVPANIC_PCI=m
CONFIG_GP_PCI1XXXX=m
# CONFIG_KEBA_CP500 is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPI3MR=m
CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
CONFIG_SCSI_MYRB=m
CONFIG_SCSI_MYRS=m
CONFIG_VMWARE_PVSCSI=m
CONFIG_XEN_SCSI_FRONTEND=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_SNIC=m
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_DMX3191D=m
# CONFIG_SCSI_FDOMAIN_PCI is not set
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_QEDI=m
CONFIG_QEDF=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_EFCT=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_WD719X=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support
CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=3
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_AHCI_DWC=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
CONFIG_SATA_DWC=m
# CONFIG_SATA_DWC_OLD_DMA is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_PARPORT=m
#
# Parallel IDE protocol modules
#
CONFIG_PATA_PARPORT_ATEN=m
# CONFIG_PATA_PARPORT_BPCK is not set
CONFIG_PATA_PARPORT_BPCK6=m
CONFIG_PATA_PARPORT_COMM=m
CONFIG_PATA_PARPORT_DSTR=m
CONFIG_PATA_PARPORT_FIT2=m
CONFIG_PATA_PARPORT_FIT3=m
CONFIG_PATA_PARPORT_EPAT=m
CONFIG_PATA_PARPORT_EPATC8=y
# CONFIG_PATA_PARPORT_EPIA is not set
# CONFIG_PATA_PARPORT_FRIQ is not set
CONFIG_PATA_PARPORT_FRPW=m
# CONFIG_PATA_PARPORT_KBIC is not set
# CONFIG_PATA_PARPORT_KTTI is not set
# CONFIG_PATA_PARPORT_ON20 is not set
CONFIG_PATA_PARPORT_ON26=m
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_BITMAP=y
# CONFIG_MD_LLBITMAP is not set
CONFIG_MD_BITMAP_FILE=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_WRITECACHE is not set
CONFIG_DM_EBS=m
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_MULTIPATH_HST=m
# CONFIG_DM_MULTIPATH_IOA is not set
CONFIG_DM_DELAY=m
CONFIG_DM_DUST=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_ZONED=m
CONFIG_DM_AUDIT=y
# CONFIG_DM_VDO is not set
# CONFIG_DM_PCACHE is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_ISCSI_TARGET_CXGB4=m
CONFIG_SBP_TARGET=m
CONFIG_REMOTE_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LAN is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_WIREGUARD=m
# CONFIG_WIREGUARD_DEBUG is not set
CONFIG_OVPN=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=m
CONFIG_IPVTAP=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_BAREUDP=m
CONFIG_GTP=m
# CONFIG_PFCP is not set
CONFIG_AMT=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
# CONFIG_NETCONSOLE_EXTENDED_LOG is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=m
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=m
CONFIG_TAP=m
CONFIG_TUN_VNET_CROSS_LE=y
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_NETKIT=y
CONFIG_NET_VRF=m
# CONFIG_VSOCKMON is not set
# CONFIG_MHI_NET is not set
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_SOLOS=m
#
# Distributed Switch Architecture drivers
#
CONFIG_B53=m
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
CONFIG_B53_SERDES=m
# CONFIG_NET_DSA_BCM_SF2 is not set
# CONFIG_NET_DSA_LOOP is not set
# CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK is not set
CONFIG_NET_DSA_LANTIQ_COMMON=m
CONFIG_NET_DSA_LANTIQ_GSWIP=m
# CONFIG_NET_DSA_MXL_GSW1XX is not set
# CONFIG_NET_DSA_MT7530 is not set
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=m
# CONFIG_NET_DSA_MICROCHIP_KSZ_SPI is not set
# CONFIG_NET_DSA_MICROCHIP_KSZ_PTP is not set
CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI=m
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6XXX_PTP=y
CONFIG_NET_DSA_MV88E6XXX_LEDS=y
# CONFIG_NET_DSA_MXL862 is not set
CONFIG_NET_DSA_MSCC_FELIX_DSA_LIB=m
# CONFIG_NET_DSA_MSCC_OCELOT_EXT is not set
CONFIG_NET_DSA_MSCC_SEVILLE=m
CONFIG_NET_DSA_AR9331=m
CONFIG_NET_DSA_QCA8K=m
CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y
CONFIG_NET_DSA_SJA1105=m
# CONFIG_NET_DSA_SJA1105_PTP is not set
# CONFIG_NET_DSA_XRS700X_I2C is not set
# CONFIG_NET_DSA_XRS700X_MDIO is not set
CONFIG_NET_DSA_REALTEK=m
# CONFIG_NET_DSA_KS8995 is not set
# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
CONFIG_NET_DSA_VITESSE_VSC73XX=m
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m
# CONFIG_NET_DSA_YT921X is not set
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=m
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=m
CONFIG_ALTERA_TSE=m
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=m
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=y
CONFIG_AMD_XGBE=m
CONFIG_AMD_XGBE_DCB=y
CONFIG_AMD_XGBE_HAVE_ECC=y
CONFIG_PDS_CORE=m
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=m
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_SPI_AX88796C=m
# CONFIG_SPI_AX88796C_COMPRESSION is not set
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_CX_ECAT=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCMGENET=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
CONFIG_SYSTEMPORT=m
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
CONFIG_BNXT_HWMON=y
# CONFIG_BNGE is not set
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=m
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MACB_PCI=m
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_THUNDER_NIC_PF=m
CONFIG_THUNDER_NIC_VF=m
CONFIG_THUNDER_NIC_BGX=m
CONFIG_THUNDER_NIC_RGX=m
CONFIG_CAVIUM_PTP=m
CONFIG_LIQUIDIO_CORE=m
CONFIG_LIQUIDIO=m
CONFIG_LIQUIDIO_VF=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_CHELSIO_INLINE_CRYPTO=y
# CONFIG_CHELSIO_IPSEC_INLINE is not set
CONFIG_CHELSIO_TLS_DEVICE=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_DM9051=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
# CONFIG_PCMCIA_XIRCOM is not set
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_TSNEP=m
# CONFIG_TSNEP_SELFTESTS is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_FUN_CORE=m
CONFIG_FUN_ETH=m
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HISILICON=y
# CONFIG_HIBMCGE is not set
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_HINIC=m
# CONFIG_HINIC3 is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_LIBETH=m
CONFIG_LIBETH_XDP=m
CONFIG_LIBIE=m
CONFIG_LIBIE_ADMINQ=m
CONFIG_LIBIE_FWLOG=m
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
# CONFIG_IXGBE_DCB is not set
CONFIG_IXGBE_IPSEC=y
CONFIG_IXGBEVF=m
CONFIG_IXGBEVF_IPSEC=y
CONFIG_I40E=m
CONFIG_I40E_DCB=y
CONFIG_IAVF=m
CONFIG_I40EVF=m
CONFIG_ICE=m
CONFIG_ICE_HWMON=y
CONFIG_ICE_SWITCHDEV=y
CONFIG_ICE_HWTS=y
CONFIG_FM10K=m
CONFIG_IGC=m
# CONFIG_IDPF is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_ADI=y
CONFIG_ADIN1110=m
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEON_EP_VF is not set
CONFIG_PRESTERA=m
CONFIG_PRESTERA_PCI=m
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=m
# CONFIG_MLX5_FPGA is not set
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
CONFIG_MLX5_ESWITCH=y
CONFIG_MLX5_BRIDGE=y
CONFIG_MLX5_CLS_ACT=y
CONFIG_MLX5_TC_CT=y
CONFIG_MLX5_TC_SAMPLE=y
CONFIG_MLX5_CORE_EN_DCB=y
# CONFIG_MLX5_CORE_IPOIB is not set
# CONFIG_MLX5_MACSEC is not set
CONFIG_MLX5_EN_IPSEC=y
# CONFIG_MLX5_EN_TLS is not set
CONFIG_MLX5_SW_STEERING=y
CONFIG_MLX5_HW_STEERING=y
# CONFIG_MLX5_SF is not set
# CONFIG_MLX5_DPLL is not set
CONFIG_MLXSW_CORE=m
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_PCI=m
CONFIG_MLXSW_I2C=m
CONFIG_MLXSW_SPECTRUM=m
CONFIG_MLXSW_SPECTRUM_DCB=y
CONFIG_MLXSW_MINIMAL=m
CONFIG_MLXFW=m
CONFIG_NET_VENDOR_META=y
# CONFIG_FBNIC is not set
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_ENCX24J600=m
CONFIG_LAN743X=m
# CONFIG_LAN865X is not set
CONFIG_VCAP=y
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_MSCC_OCELOT_SWITCH_LIB=m
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_MICROSOFT_MANA=m
CONFIG_NET_VENDOR_MUCSE=y
# CONFIG_MGBE is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=m
# CONFIG_NET_VENDOR_NI is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=m
# CONFIG_NFP_APP_FLOWER is not set
CONFIG_NFP_APP_ABM_NIC=y
CONFIG_NFP_NET_IPSEC=y
# CONFIG_NFP_DEBUG is not set
CONFIG_NET_VENDOR_8390=y
CONFIG_NE2K_PCI=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=m
CONFIG_QED_RDMA=y
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_QED_OOO=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCOM_EMAC=m
CONFIG_RMNET=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
# CONFIG_RTASE is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=m
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=m
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_FALCON=m
CONFIG_SFC_FALCON_MTD=y
CONFIG_SFC_SIENA=m
CONFIG_SFC_SIENA_MTD=y
CONFIG_SFC_SIENA_MCDI_MON=y
# CONFIG_SFC_SIENA_SRIOV is not set
CONFIG_SFC_SIENA_MCDI_LOGGING=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
CONFIG_SMSC911X=m
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_SELFTESTS is not set
CONFIG_STMMAC_PLATFORM=m
CONFIG_DWMAC_GENERIC=m
CONFIG_STMMAC_LIBPCI=m
CONFIG_DWMAC_INTEL=m
# CONFIG_DWMAC_MOTORCOMM is not set
CONFIG_STMMAC_PCI=m
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
# CONFIG_TEHUTI_TN40 is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_MSE102X=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_LIBWX=m
CONFIG_NGBE=m
CONFIG_TXGBE=m
# CONFIG_TXGBEVF is not set
# CONFIG_NGBEVF is not set
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=m
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
CONFIG_XILINX_LL_TEMAC=m
# CONFIG_FDDI is not set
CONFIG_PHYLINK=m
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_PHY_PACKAGE=m
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_SFP=m
#
# MII PHY device drivers
#
# CONFIG_AS21XXX_PHY is not set
# CONFIG_AIR_EN8811H_PHY is not set
CONFIG_AMD_PHY=m
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
CONFIG_AQUANTIA_PHY=m
CONFIG_AX88796B_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_BCM54140_PHY=m
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM84881_PHY=y
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BCM_NET_PHYPTP=m
CONFIG_CICADA_PHY=m
CONFIG_CORTINA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_LXT_PHY=m
CONFIG_INTEL_XWAY_PHY=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MARVELL_10G_PHY=m
# CONFIG_MARVELL_88Q2XXX_PHY is not set
CONFIG_MARVELL_88X2222_PHY=m
CONFIG_MAXLINEAR_GPHY=m
# CONFIG_MAXLINEAR_86110_PHY is not set
CONFIG_MEDIATEK_GE_PHY=m
CONFIG_MTK_NET_PHYLIB=m
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_T1S_PHY=m
CONFIG_MICROCHIP_PHY=m
# CONFIG_MICROCHIP_T1_PHY is not set
CONFIG_MICROSEMI_PHY=m
CONFIG_MOTORCOMM_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_NXP_CBTX_PHY=m
CONFIG_NXP_C45_TJA11XX_PHY=m
# CONFIG_NXP_TJA11XX_PHY is not set
CONFIG_NCN26000_PHY=m
CONFIG_QCOM_NET_PHYLIB=m
CONFIG_AT803X_PHY=m
# CONFIG_QCA83XX_PHY is not set
# CONFIG_QCA808X_PHY is not set
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_REALTEK_PHY_HWMON=y
CONFIG_RENESAS_PHY=m
CONFIG_ROCKCHIP_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
CONFIG_TERANETICS_PHY=m
CONFIG_DP83822_PHY=m
# CONFIG_DP83TC811_PHY is not set
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
CONFIG_DP83869_PHY=m
# CONFIG_DP83TD510_PHY is not set
# CONFIG_DP83TG720_PHY is not set
CONFIG_VITESSE_PHY=m
CONFIG_XILINX_GMII2RGMII=m
# CONFIG_PSE_CONTROLLER is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_RX_OFFLOAD=y
# CONFIG_CAN_CAN327 is not set
# CONFIG_CAN_DUMMY is not set
# CONFIG_CAN_JANZ_ICAN3 is not set
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
CONFIG_CAN_CTUCANFD=m
CONFIG_CAN_CTUCANFD_PCI=m
# CONFIG_CAN_ESD_402_PCI is not set
CONFIG_CAN_IFI_CANFD=m
CONFIG_CAN_M_CAN=m
# CONFIG_CAN_M_CAN_PCI is not set
# CONFIG_CAN_M_CAN_PLATFORM is not set
# CONFIG_CAN_M_CAN_TCAN4X5X is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
# CONFIG_CAN_SJA1000 is not set
CONFIG_CAN_SOFTING=m
#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
CONFIG_CAN_MCP251X=m
CONFIG_CAN_MCP251XFD=m
# CONFIG_CAN_MCP251XFD_SANITY is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
# CONFIG_CAN_ESD_USB is not set
CONFIG_CAN_ETAS_ES58X=m
# CONFIG_CAN_F81604 is not set
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_NCT6694 is not set
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_UCAN=m
# end of CAN USB interfaces
CONFIG_CAN_DEBUG_DEVICES=y
#
# MCTP Device Drivers
#
CONFIG_MCTP_SERIAL=m
CONFIG_MCTP_TRANSPORT_I2C=m
# CONFIG_MCTP_TRANSPORT_I3C is not set
# CONFIG_MCTP_TRANSPORT_USB is not set
# end of MCTP Device Drivers
CONFIG_FWNODE_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_MDIO_CAVIUM=m
CONFIG_MDIO_GPIO=m
CONFIG_MDIO_I2C=m
# CONFIG_MDIO_MVUSB is not set
CONFIG_MDIO_MSCC_MIIM=m
CONFIG_MDIO_REGMAP=m
CONFIG_MDIO_THUNDER=m
#
# MDIO Multiplexers
#
#
# PCS device drivers
#
CONFIG_PCS_XPCS=m
CONFIG_PCS_LYNX=m
# end of PCS device drivers
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
# CONFIG_PPPOE_HASH_BITS_1 is not set
# CONFIG_PPPOE_HASH_BITS_2 is not set
CONFIG_PPPOE_HASH_BITS_4=y
# CONFIG_PPPOE_HASH_BITS_8 is not set
CONFIG_PPPOE_HASH_BITS=4
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_USB_NET_DRIVERS=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
CONFIG_USB_NET_AQC111=m
CONFIG_USB_RTL8153_ECM=m
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=m
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_DYNACK is not set
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_PCI_NO_EEPROM=m
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_ATH9K_HWRNG=y
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
# CONFIG_CARL9170_DEBUGFS is not set
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
# CONFIG_ATH6KL_TRACING is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
# CONFIG_WIL6210_TRACING is not set
CONFIG_WIL6210_DEBUGFS=y
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_SDIO is not set
CONFIG_ATH10K_USB=m
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
CONFIG_ATH10K_LEDS=y
# CONFIG_ATH10K_TRACING is not set
CONFIG_WCN36XX=m
# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_ATH11K=m
CONFIG_ATH11K_PCI=m
# CONFIG_ATH11K_DEBUG is not set
# CONFIG_ATH11K_DEBUGFS is not set
# CONFIG_ATH11K_TRACING is not set
CONFIG_ATH12K=m
# CONFIG_ATH12K_DEBUG is not set
# CONFIG_ATH12K_DEBUGFS is not set
# CONFIG_ATH12K_TRACING is not set
# CONFIG_ATH12K_COREDUMP is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMSMAC_LEDS=y
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
# CONFIG_IWLEGACY_DEBUGFS is not set
# end of iwl3945 / iwl4965 Debugging Options
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLMLD=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEBUGFS is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# end of Debugging Options
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=m
CONFIG_MT76_SDIO=m
CONFIG_MT76x02_LIB=m
CONFIG_MT76x02_USB=m
CONFIG_MT76_CONNAC_LIB=m
CONFIG_MT792x_LIB=m
CONFIG_MT792x_USB=m
CONFIG_MT76x0_COMMON=m
CONFIG_MT76x0U=m
CONFIG_MT76x0E=m
CONFIG_MT76x2_COMMON=m
CONFIG_MT76x2E=m
CONFIG_MT76x2U=m
CONFIG_MT7603E=m
CONFIG_MT7615_COMMON=m
CONFIG_MT7615E=m
CONFIG_MT7663_USB_SDIO_COMMON=m
CONFIG_MT7663U=m
CONFIG_MT7663S=m
CONFIG_MT7915E=m
CONFIG_MT7921_COMMON=m
CONFIG_MT7921E=m
CONFIG_MT7921S=m
CONFIG_MT7921U=m
CONFIG_MT7996E=m
CONFIG_MT7925_COMMON=m
CONFIG_MT7925E=m
CONFIG_MT7925U=m
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WILC1000=m
CONFIG_WILC1000_SDIO=m
# CONFIG_WILC1000_SPI is not set
# CONFIG_WILC1000_HW_OOB_INTR is not set
CONFIG_WLAN_VENDOR_PURELIFI=y
# CONFIG_PLFXLC is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8821AE=m
# CONFIG_RTL8192CU is not set
CONFIG_RTL8192DU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8192D_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
CONFIG_RTL8XXXU=m
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTW88=m
CONFIG_RTW88_CORE=m
CONFIG_RTW88_PCI=m
CONFIG_RTW88_SDIO=m
CONFIG_RTW88_USB=m
CONFIG_RTW88_8822B=m
CONFIG_RTW88_8822C=m
CONFIG_RTW88_8723X=m
CONFIG_RTW88_8703B=m
CONFIG_RTW88_8723D=m
CONFIG_RTW88_8821C=m
CONFIG_RTW88_88XXA=m
CONFIG_RTW88_8821A=m
CONFIG_RTW88_8812A=m
CONFIG_RTW88_8822BE=m
CONFIG_RTW88_8822BS=m
CONFIG_RTW88_8822BU=m
CONFIG_RTW88_8822CE=m
CONFIG_RTW88_8822CS=m
CONFIG_RTW88_8822CU=m
CONFIG_RTW88_8723DE=m
CONFIG_RTW88_8723DS=m
CONFIG_RTW88_8723CS=m
CONFIG_RTW88_8723DU=m
CONFIG_RTW88_8821CE=m
CONFIG_RTW88_8821CS=m
CONFIG_RTW88_8821CU=m
CONFIG_RTW88_8821AU=m
CONFIG_RTW88_8812AU=m
# CONFIG_RTW88_8814AE is not set
# CONFIG_RTW88_8814AU is not set
# CONFIG_RTW88_DEBUG is not set
# CONFIG_RTW88_DEBUGFS is not set
CONFIG_RTW88_LEDS=y
CONFIG_RTW89=m
CONFIG_RTW89_CORE=m
CONFIG_RTW89_PCI=m
CONFIG_RTW89_8852A=m
CONFIG_RTW89_8852B_COMMON=m
CONFIG_RTW89_8852B=m
CONFIG_RTW89_8852C=m
CONFIG_RTW89_8922A=m
# CONFIG_RTW89_8851BE is not set
# CONFIG_RTW89_8851BU is not set
CONFIG_RTW89_8852AE=m
# CONFIG_RTW89_8852AU is not set
CONFIG_RTW89_8852BE=m
# CONFIG_RTW89_8852BU is not set
# CONFIG_RTW89_8852BTE is not set
CONFIG_RTW89_8852CE=m
# CONFIG_RTW89_8852CU is not set
CONFIG_RTW89_8922AE=m
# CONFIG_RTW89_DEBUGMSG is not set
# CONFIG_RTW89_DEBUGFS is not set
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=m
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=m
CONFIG_RSI_USB=m
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WFX=m
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_CW1200_WLAN_SPI=m
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SDIO=m
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_QTNFMAC=m
CONFIG_QTNFMAC_PCIE=m
# CONFIG_MAC80211_HWSIM is not set
CONFIG_VIRT_WIFI=m
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_AT86RF230=m
CONFIG_IEEE802154_MRF24J40=m
# CONFIG_IEEE802154_CC2520 is not set
CONFIG_IEEE802154_ATUSB=m
CONFIG_IEEE802154_ADF7242=m
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
CONFIG_IEEE802154_HWSIM=m
#
# Wireless WAN
#
CONFIG_WWAN=m
CONFIG_WWAN_DEBUGFS=y
CONFIG_WWAN_HWSIM=m
CONFIG_MHI_WWAN_CTRL=m
CONFIG_MHI_WWAN_MBIM=m
CONFIG_RPMSG_WWAN_CTRL=m
CONFIG_IOSM=m
CONFIG_MTK_T7XX=m
# end of Wireless WAN
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_NETDEV_BACKEND=m
CONFIG_VMXNET3=m
CONFIG_FUJITSU_ES=m
CONFIG_USB4_NET=m
CONFIG_HYPERV_NET=m
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=m
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_APPLESPI=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=m
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA8418=m
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_CHARLIEPLEX is not set
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MPR121=m
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_PINEPHONE is not set
CONFIG_KEYBOARD_SAMSUNG=m
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_IQS62X is not set
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_CROS_EC=m
# CONFIG_KEYBOARD_MTK_PMIC is not set
CONFIG_KEYBOARD_CYPRESS_SF=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADC=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=m
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_JOYSTICK_QWIIC=m
CONFIG_JOYSTICK_FSIA6B=m
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_JOYSTICK_SEESAW is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=m
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_BU21029=m
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m
CONFIG_TOUCHSCREEN_CY8CTMA140=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
CONFIG_TOUCHSCREEN_CYTTSP5=m
CONFIG_TOUCHSCREEN_DA9052=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
CONFIG_TOUCHSCREEN_EXC3000=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
# CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C is not set
# CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI is not set
CONFIG_TOUCHSCREEN_HIDEEP=m
# CONFIG_TOUCHSCREEN_HIMAX_HX852X is not set
CONFIG_TOUCHSCREEN_HYCON_HY46XX=m
CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX=m
# CONFIG_TOUCHSCREEN_HYNITRON_CST816X is not set
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_ILITEK=m
CONFIG_TOUCHSCREEN_S6SY761=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MELFAS_MIP4=m
CONFIG_TOUCHSCREEN_MSG2638=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_NOVATEK_NVT_TS=m
CONFIG_TOUCHSCREEN_IMAGIS=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
# CONFIG_TOUCHSCREEN_WM831X is not set
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
# CONFIG_TOUCHSCREEN_PCAP is not set
CONFIG_TOUCHSCREEN_RM_TS=m
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_STMFTS is not set
CONFIG_TOUCHSCREEN_SUR40=m
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_TOUCHSCREEN_ZET6223=m
CONFIG_TOUCHSCREEN_ZFORCE=m
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_TOUCHSCREEN_IQS5XX=m
# CONFIG_TOUCHSCREEN_IQS7211 is not set
CONFIG_TOUCHSCREEN_ZINITIX=m
CONFIG_TOUCHSCREEN_HIMAX_HX83112B=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_ARIZONA_HAPTICS=m
# CONFIG_INPUT_AW86927 is not set
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_E3X0_BUTTON=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GPIO_BEEPER is not set
CONFIG_INPUT_GPIO_DECODER=m
CONFIG_INPUT_GPIO_VIBRA=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_REGULATOR_HAPTIC=m
CONFIG_INPUT_RETU_PWRBUTTON=m
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_PWM_VIBRA=m
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
CONFIG_INPUT_DA9052_ONKEY=m
CONFIG_INPUT_DA9063_ONKEY=m
# CONFIG_INPUT_WM831X_ON is not set
# CONFIG_INPUT_PCAP is not set
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_ADXL34X_SPI=m
# CONFIG_INPUT_IBM_PANEL is not set
CONFIG_INPUT_IMS_PCU=m
CONFIG_INPUT_IQS269A=m
CONFIG_INPUT_IQS626A=m
# CONFIG_INPUT_IQS7222 is not set
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
CONFIG_INPUT_DRV260X_HAPTICS=m
CONFIG_INPUT_DRV2665_HAPTICS=m
CONFIG_INPUT_DRV2667_HAPTICS=m
# CONFIG_INPUT_RT5120_PWRKEY is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
# CONFIG_RMI4_F1A is not set
# CONFIG_RMI4_F21 is not set
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
CONFIG_SERIO_GPIO_PS2=m
CONFIG_USERIO=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LEGACY_TIOCSTI is not set
# CONFIG_LDISC_AUTOLOAD is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_MEN_MCB=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_PCI1XXXX=m
CONFIG_SERIAL_8250_DFL=m
CONFIG_SERIAL_8250_DW=m
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=m
CONFIG_SERIAL_8250_MID=m
CONFIG_SERIAL_8250_PERICOM=m
# CONFIG_SERIAL_8250_NI is not set
CONFIG_SERIAL_8250_DWLIB=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_LANTIQ=m
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_SC16IS7XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=m
CONFIG_SERIAL_FSL_LINFLEXUART=m
# CONFIG_SERIAL_MEN_Z135 is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
CONFIG_NULL_TTY=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_RPMSG_TTY=m
CONFIG_SERIAL_DEV_BUS=m
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_IPMB=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_SSIF_IPMI_BMC=m
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_BA431=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_XIPHERA=m
CONFIG_APPLICOM=m
CONFIG_DEVMEM=y
CONFIG_NVRAM=m
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TPM2_HMAC=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=m
CONFIG_TCG_TIS=m
CONFIG_TCG_TIS_SPI=m
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_I2C=m
CONFIG_TCG_TIS_I2C_CR50=m
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_XEN=m
CONFIG_TCG_CRB=m
CONFIG_TCG_VTPM_PROXY=m
# CONFIG_TCG_SVSM is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_TCG_TIS_ST33ZP24_SPI=m
CONFIG_TELCLOCK=m
CONFIG_XILLYBUS_CLASS=m
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m
CONFIG_XILLYUSB=m
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
# CONFIG_I2C_MUX_LTC4306 is not set
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_CCGX_UCSI=m
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_AMD_MP2=m
# CONFIG_I2C_AMD_ASF is not set
CONFIG_I2C_I801=m
CONFIG_I2C_I801_MUX=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NVIDIA_GPU=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_ZHAOXIN is not set
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_AMDPSP=y
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_EMEV2=m
CONFIG_I2C_GPIO=m
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
CONFIG_I2C_KEMPLD=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_DLN2 is not set
# CONFIG_I2C_NCT6694 is not set
CONFIG_I2C_CP2615=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PCI1XXXX=m
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_VIRTIO=m
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
CONFIG_I2C_SLAVE_TESTUNIT=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
CONFIG_I3C=m
# CONFIG_ADI_I3C_MASTER is not set
CONFIG_CDNS_I3C_MASTER=m
CONFIG_DW_I3C_MASTER=m
CONFIG_SVC_I3C_MASTER=m
# CONFIG_MIPI_I3C_HCI is not set
CONFIG_I3C_OR_I2C=m
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_OFFLOAD=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_ALTERA_CORE=m
CONFIG_SPI_ALTERA_DFL=m
CONFIG_SPI_AXI_SPI_ENGINE=m
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CADENCE=m
# CONFIG_SPI_CH341 is not set
CONFIG_SPI_CS42L43=m
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_DMA=y
CONFIG_SPI_DW_PCI=m
CONFIG_SPI_DW_MMIO=m
CONFIG_SPI_DLN2=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_INTEL=m
CONFIG_SPI_INTEL_PCI=m
CONFIG_SPI_INTEL_PLATFORM=m
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
# CONFIG_SPI_MICROCHIP_CORE_SPI is not set
CONFIG_SPI_LANTIQ_SSC=m
CONFIG_SPI_OC_TINY=m
CONFIG_SPI_PCI1XXXX=m
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
CONFIG_SPI_SC18IS602=m
CONFIG_SPI_SIFIVE=m
CONFIG_SPI_MXIC=m
# CONFIG_SPI_VIRTIO is not set
CONFIG_SPI_XCOMM=m
CONFIG_SPI_XILINX=m
CONFIG_SPI_ZYNQMP_GQSPI=m
CONFIG_SPI_AMD=m
#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=m
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=m
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
#
# SPI Offload triggers
#
# CONFIG_SPI_OFFLOAD_TRIGGER_ADI_UTIL_SD is not set
# CONFIG_SPI_OFFLOAD_TRIGGER_PWM is not set
CONFIG_SPMI=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
# CONFIG_PPS_GENERATOR is not set
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
CONFIG_PTP_1588_CLOCK_KVM=m
CONFIG_PTP_1588_CLOCK_VMCLOCK=m
CONFIG_PTP_1588_CLOCK_IDT82P33=m
CONFIG_PTP_1588_CLOCK_IDTCM=m
# CONFIG_PTP_1588_CLOCK_FC3W is not set
# CONFIG_PTP_1588_CLOCK_MOCK is not set
CONFIG_PTP_1588_CLOCK_VMW=m
# CONFIG_PTP_1588_CLOCK_OCP is not set
CONFIG_PTP_DFL_TOD=m
# CONFIG_PTP_NETC_V4_TIMER is not set
# end of PTP clock support
#
# DPLL device support
#
CONFIG_DPLL=y
# CONFIG_ZL3073X_I2C is not set
# CONFIG_ZL3073X_SPI is not set
# end of DPLL device support
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_CY8C95X0=m
CONFIG_PINCTRL_DA9062=m
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08_SPI=m
CONFIG_PINCTRL_MCP23S08=m
# CONFIG_PINCTRL_STMFX is not set
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_CS42L43=m
CONFIG_PINCTRL_MADERA=m
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_LYNXPOINT=m
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_INTEL_PLATFORM=m
CONFIG_PINCTRL_ALDERLAKE=m
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=m
CONFIG_PINCTRL_DENVERTON=m
CONFIG_PINCTRL_ELKHARTLAKE=m
CONFIG_PINCTRL_EMMITSBURG=m
CONFIG_PINCTRL_GEMINILAKE=m
CONFIG_PINCTRL_ICELAKE=m
CONFIG_PINCTRL_JASPERLAKE=m
CONFIG_PINCTRL_LAKEFIELD=m
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_METEORLAKE=m
CONFIG_PINCTRL_METEORPOINT=m
CONFIG_PINCTRL_SUNRISEPOINT=m
CONFIG_PINCTRL_TIGERLAKE=m
# end of Intel pinctrl drivers
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB_LEGACY=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_REGMAP=m
CONFIG_GPIO_SWNODE_UNDEFINED=y
CONFIG_GPIO_MAX730X=m
CONFIG_GPIO_IDIO_16=m
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_ALTERA is not set
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_BY_PINCTRL is not set
CONFIG_GPIO_DWAPB=m
CONFIG_GPIO_EXAR=m
CONFIG_GPIO_GENERIC_PLATFORM=m
# CONFIG_GPIO_GRANITERAPIDS is not set
CONFIG_GPIO_ICH=m
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MENZ127=m
# CONFIG_GPIO_POLARFIRE_SOC is not set
# CONFIG_GPIO_XILINX is not set
CONFIG_GPIO_AMD_FCH=m
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_VX855=m
CONFIG_GPIO_F7188X=m
CONFIG_GPIO_IT87=m
CONFIG_GPIO_SCH=m
# CONFIG_GPIO_NOVALAKE is not set
CONFIG_GPIO_SCH311X=m
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_FXL6408=m
# CONFIG_GPIO_DS4520 is not set
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_TPIC2810=m
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_BD9571MWV=m
# CONFIG_GPIO_CROS_EC is not set
CONFIG_GPIO_DA9052=m
CONFIG_GPIO_DLN2=m
CONFIG_GPIO_JANZ_TTL=m
CONFIG_GPIO_KEMPLD=m
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=m
CONFIG_GPIO_MADERA=m
# CONFIG_GPIO_NCT6694 is not set
# CONFIG_GPIO_QIXIS_FPGA is not set
CONFIG_GPIO_TPS65086=m
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_TPS68470=m
CONFIG_GPIO_TQMX86=m
# CONFIG_GPIO_WM831X is not set
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=m
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_PCI_IDIO_16=m
# CONFIG_GPIO_PCIE_IDIO_24 is not set
CONFIG_GPIO_RDC321X=m
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
CONFIG_GPIO_MAX3191X=m
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_PISOSR=m
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# CONFIG_GPIO_MPSSE is not set
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
CONFIG_GPIO_LATCH=m
CONFIG_GPIO_MOCKUP=m
CONFIG_GPIO_VIRTIO=m
CONFIG_GPIO_SIM=m
# end of Virtual GPIO drivers
#
# GPIO Debugging utilities
#
# CONFIG_GPIO_VIRTUSER is not set
# end of GPIO Debugging utilities
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_AMD_AXI is not set
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_MASTER_SGI=m
# CONFIG_W1_MASTER_UART is not set
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=m
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
CONFIG_W1_SLAVE_DS2430=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SEQUENCING is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_ADC_BATTERY_HELPER=m
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_IP5XXX_POWER=m
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
CONFIG_TEST_POWER=m
CONFIG_CHARGER_ADP5061=m
# CONFIG_BATTERY_CHAGALL is not set
CONFIG_BATTERY_CW2015=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_S2MU005 is not set
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=m
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9052=m
CONFIG_CHARGER_DA9150=m
CONFIG_BATTERY_DA9150=m
CONFIG_AXP20X_POWER=m
CONFIG_AXP288_CHARGER=m
CONFIG_AXP288_FUEL_GAUGE=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
# CONFIG_BATTERY_MAX1720X is not set
CONFIG_BATTERY_MAX1721X=m
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=m
CONFIG_CHARGER_LTC4162L=m
CONFIG_CHARGER_MAX77976=m
# CONFIG_CHARGER_MAX8971 is not set
CONFIG_CHARGER_MP2629=m
CONFIG_CHARGER_MT6360=m
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_BQ25980=m
CONFIG_CHARGER_BQ256XX=m
CONFIG_CHARGER_SMB347=m
CONFIG_BATTERY_GAUGE_LTC2941=m
# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_BATTERY_RT5033=m
# CONFIG_CHARGER_RT5033 is not set
CONFIG_CHARGER_RT9455=m
CONFIG_CHARGER_RT9467=m
CONFIG_CHARGER_RT9471=m
# CONFIG_CHARGER_RT9756 is not set
CONFIG_CHARGER_CROS_USBPD=m
CONFIG_CHARGER_CROS_PCHG=m
CONFIG_CHARGER_CROS_CONTROL=m
# CONFIG_FUEL_GAUGE_STC3117 is not set
CONFIG_CHARGER_BD99954=m
CONFIG_BATTERY_SURFACE=m
CONFIG_CHARGER_SURFACE=m
CONFIG_BATTERY_UG3105=m
# CONFIG_FUEL_GAUGE_MM8013 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_SMPRO=m
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM1177=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_AHT10=m
CONFIG_SENSORS_AQUACOMPUTER_D5NEXT=m
CONFIG_SENSORS_AS370=m
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_ASUS_ROG_RYUJIN is not set
CONFIG_SENSORS_AXI_FAN_CONTROL=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CHIPCAP2 is not set
CONFIG_SENSORS_CORSAIR_CPRO=m
CONFIG_SENSORS_CORSAIR_PSU=m
CONFIG_SENSORS_CROS_EC=m
CONFIG_SENSORS_DRIVETEMP=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_I8K=y
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_FTSTEUTATES=m
# CONFIG_SENSORS_GIGABYTE_WATERFORCE is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GPD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
# CONFIG_SENSORS_HS3001 is not set
# CONFIG_SENSORS_HTU31 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_ISL28022 is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWERZ is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LATTEPANDA_SIGMA_EC is not set
# CONFIG_SENSORS_LENOVO_EC is not set
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2947_SPI=m
CONFIG_SENSORS_LTC2990=m
# CONFIG_SENSORS_LTC2991 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_LTC4282 is not set
CONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX31722=m
CONFIG_SENSORS_MAX31730=m
CONFIG_SENSORS_MAX31760=m
# CONFIG_MAX31827 is not set
CONFIG_SENSORS_MAX6620=m
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MC34VR500=m
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MCP9982 is not set
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_TPS23861=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_MR75203=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
# CONFIG_SENSORS_NCT6694 is not set
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7363 is not set
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_NPCM7XX=m
CONFIG_SENSORS_NZXT_KRAKEN2=m
# CONFIG_SENSORS_NZXT_KRAKEN3 is not set
CONFIG_SENSORS_NZXT_SMART2=m
CONFIG_SENSORS_OCC_P8_I2C=m
CONFIG_SENSORS_OCC=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_PECI_CPUTEMP=m
CONFIG_SENSORS_PECI_DIMMTEMP=m
CONFIG_SENSORS_PECI=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ACBEL_FSG032=m
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_ADP1050 is not set
# CONFIG_SENSORS_APS_379 is not set
CONFIG_SENSORS_BEL_PFE=m
CONFIG_SENSORS_BPA_RS600=m
# CONFIG_SENSORS_CRPS is not set
CONFIG_SENSORS_DELTA_AHE50DC_FAN=m
CONFIG_SENSORS_FSP_3Y=m
# CONFIG_SENSORS_HAC300S is not set
CONFIG_SENSORS_IBM_CFFPS=m
CONFIG_SENSORS_DPS920AB=m
# CONFIG_SENSORS_INA233 is not set
CONFIG_SENSORS_INSPUR_IPSPS=m
# CONFIG_SENSORS_IR35221 is not set
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
CONFIG_SENSORS_IR38064_REGULATOR=y
# CONFIG_SENSORS_IRPS5401 is not set
CONFIG_SENSORS_ISL68137=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LM25066_REGULATOR=y
# CONFIG_SENSORS_LT3074 is not set
CONFIG_SENSORS_LT7182S=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC2978_REGULATOR is not set
CONFIG_SENSORS_LTC3815=m
# CONFIG_SENSORS_LTC4286 is not set
CONFIG_SENSORS_MAX15301=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16601=m
# CONFIG_SENSORS_MAX17616 is not set
CONFIG_SENSORS_MAX20730=m
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX31785=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2856 is not set
# CONFIG_SENSORS_MP2869 is not set
CONFIG_SENSORS_MP2888=m
# CONFIG_SENSORS_MP2891 is not set
# CONFIG_SENSORS_MP2925 is not set
# CONFIG_SENSORS_MP29502 is not set
CONFIG_SENSORS_MP2975=m
# CONFIG_SENSORS_MP2993 is not set
# CONFIG_SENSORS_MP2975_REGULATOR is not set
CONFIG_SENSORS_MP5023=m
# CONFIG_SENSORS_MP5920 is not set
# CONFIG_SENSORS_MP5926 is not set
# CONFIG_SENSORS_MP5990 is not set
# CONFIG_SENSORS_MP9941 is not set
# CONFIG_SENSORS_MP9945 is not set
CONFIG_SENSORS_MPQ7932_REGULATOR=y
CONFIG_SENSORS_MPQ7932=m
# CONFIG_SENSORS_MPQ8785 is not set
CONFIG_SENSORS_PIM4328=m
CONFIG_SENSORS_PLI1209BC=m
CONFIG_SENSORS_PLI1209BC_REGULATOR=y
# CONFIG_SENSORS_PM6764TR is not set
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STEF48H28 is not set
CONFIG_SENSORS_STPDDC60=m
CONFIG_SENSORS_TDA38640=m
CONFIG_SENSORS_TDA38640_REGULATOR=y
# CONFIG_SENSORS_TPS25990 is not set
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_TPS546D24=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDP710 is not set
# CONFIG_SENSORS_XDP720 is not set
# CONFIG_SENSORS_XDPE152 is not set
# CONFIG_SENSORS_XDPE1A2G7B is not set
CONFIG_SENSORS_XDPE122=m
CONFIG_SENSORS_XDPE122_REGULATOR=y
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_PT5161L is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SBTSI is not set
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
CONFIG_SENSORS_SHT4x=m
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SY7636A=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC2305=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_STTS751=m
# CONFIG_SENSORS_SURFACE_FAN is not set
# CONFIG_SENSORS_SURFACE_TEMP is not set
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA238=m
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_SPD5118=m
CONFIG_SENSORS_SPD5118_DETECT=y
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_TMP464=m
CONFIG_SENSORS_TMP513=m
# CONFIG_SENSORS_TSC1641 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_WM831X is not set
CONFIG_SENSORS_XGENE=m
# CONFIG_SENSORS_YOGAFAN is not set
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ASUS_WMI=m
CONFIG_SENSORS_ASUS_EC=m
# CONFIG_SENSORS_HP_WMI is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_STATISTICS=y
# CONFIG_THERMAL_DEBUGFS is not set
# CONFIG_THERMAL_CORE_TESTING is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_DEFAULT_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_DEVFREQ_THERMAL=y
# CONFIG_PCIE_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_INTEL_TCC=y
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
CONFIG_INT3406_THERMAL=m
CONFIG_PROC_THERMAL_MMIO_RAPL=m
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_INTEL_TCC_COOLING=m
CONFIG_INTEL_HFI_THERMAL=y
# end of Intel thermal drivers
CONFIG_GENERIC_ADC_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_CROS_EC_WATCHDOG is not set
CONFIG_DA9052_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=m
# CONFIG_LENOVO_SE10_WDT is not set
# CONFIG_LENOVO_SE30_WDT is not set
CONFIG_MENF21BMC_WATCHDOG=m
# CONFIG_MENZ069_WATCHDOG is not set
CONFIG_WDAT_WDT=m
# CONFIG_WM831X_WATCHDOG is not set
CONFIG_XILINX_WATCHDOG=m
CONFIG_ZIIRAVE_WATCHDOG=m
CONFIG_CADENCE_WATCHDOG=m
CONFIG_DW_WATCHDOG=m
CONFIG_MAX63XX_WATCHDOG=m
# CONFIG_NCT6694_WATCHDOG is not set
CONFIG_RETU_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ADVANTECH_EC_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
# CONFIG_EXAR_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
# CONFIG_INTEL_OC_WATCHDOG is not set
CONFIG_ITCO_WDT=m
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_KEMPLD_WDT=m
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_TQMX86_WDT=m
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
CONFIG_INTEL_MEI_WDT=m
CONFIG_NI903X_WDT=m
CONFIG_NIC7018_WDT=m
CONFIG_SIEMENS_SIMATIC_IPC_WDT=m
CONFIG_MEN_A21_WDT=m
CONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_SFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
CONFIG_MFD_SMPRO=m
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=m
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
# CONFIG_MFD_CGBC is not set
CONFIG_MFD_CROS_EC_DEV=m
# CONFIG_MFD_CS40L50_I2C is not set
# CONFIG_MFD_CS40L50_SPI is not set
CONFIG_MFD_CS42L43=m
# CONFIG_MFD_CS42L43_I2C is not set
CONFIG_MFD_CS42L43_SDW=m
CONFIG_MFD_MADERA=m
CONFIG_MFD_MADERA_I2C=m
CONFIG_MFD_MADERA_SPI=m
# CONFIG_MFD_CS47L15 is not set
CONFIG_MFD_CS47L35=y
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
# CONFIG_MFD_CS47L92 is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_DA9062=m
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=m
CONFIG_MFD_DLN2=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=m
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC_BXTWC is not set
CONFIG_INTEL_SOC_PMIC_MRFLD=m
CONFIG_MFD_INTEL_LPSS=m
CONFIG_MFD_INTEL_LPSS_ACPI=m
CONFIG_MFD_INTEL_LPSS_PCI=m
CONFIG_MFD_INTEL_PMC_BXT=m
CONFIG_MFD_IQS62X=m
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_KEMPLD=m
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX5970 is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77541 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77705 is not set
CONFIG_MFD_MAX77843=y
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=m
# CONFIG_MFD_MT6370 is not set
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=m
CONFIG_MFD_NCT6694=m
# CONFIG_MFD_OCELOT is not set
CONFIG_EZX_PCAP=y
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
CONFIG_MFD_SY7636A=m
CONFIG_MFD_RDC321X=m
CONFIG_MFD_RT4831=m
CONFIG_MFD_RT5033=m
CONFIG_MFD_RT5120=m
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SIMPLE_MFD_I2C=m
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=m
CONFIG_MFD_SYSCON=y
CONFIG_MFD_LP3943=m
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_BQ257XX is not set
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65086=m
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TI_LP873X=m
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
# CONFIG_MFD_TPS65912_I2C is not set
CONFIG_MFD_TPS65912_SPI=y
# CONFIG_MFD_TPS6594_I2C is not set
# CONFIG_MFD_TPS6594_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_LM3533=m
CONFIG_MFD_TQMX86=m
CONFIG_MFD_VX855=m
CONFIG_MFD_ARIZONA=m
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_ARIZONA_SPI=m
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_RAVE_SP_CORE is not set
CONFIG_MFD_INTEL_M10_BMC_CORE=m
CONFIG_MFD_INTEL_M10_BMC_SPI=m
CONFIG_MFD_INTEL_M10_BMC_PMCI=m
# CONFIG_MFD_QNAP_MCU is not set
# CONFIG_MFD_UPBOARD_FPGA is not set
# CONFIG_MFD_MAX7360 is not set
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
# CONFIG_REGULATOR_NETLINK_EVENTS is not set
# CONFIG_REGULATOR_88PG86X is not set
CONFIG_REGULATOR_ACT8865=m
CONFIG_REGULATOR_AD5398=m
# CONFIG_REGULATOR_ADP5055 is not set
# CONFIG_REGULATOR_ARIZONA_LDO1 is not set
# CONFIG_REGULATOR_ARIZONA_MICSUPP is not set
# CONFIG_REGULATOR_AW37503 is not set
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_DA9062=m
CONFIG_REGULATOR_DA9210=m
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_FP9931 is not set
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX1586=m
# CONFIG_REGULATOR_MAX77503 is not set
# CONFIG_REGULATOR_MAX77857 is not set
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8893=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX20086=m
CONFIG_REGULATOR_MAX20411=m
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MAX77826=m
# CONFIG_REGULATOR_MAX77838 is not set
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MP8859=m
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6315=m
# CONFIG_REGULATOR_MT6316 is not set
CONFIG_REGULATOR_MT6323=m
CONFIG_REGULATOR_MT6331=m
CONFIG_REGULATOR_MT6332=m
CONFIG_REGULATOR_MT6357=m
CONFIG_REGULATOR_MT6358=m
CONFIG_REGULATOR_MT6359=m
CONFIG_REGULATOR_MT6360=m
# CONFIG_REGULATOR_MT6363 is not set
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PCA9450=m
# CONFIG_REGULATOR_PF9453 is not set
CONFIG_REGULATOR_PCAP=m
# CONFIG_REGULATOR_PF0900 is not set
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
CONFIG_REGULATOR_PV88090=m
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_QCOM_SPMI=m
CONFIG_REGULATOR_QCOM_USB_VBUS=m
# CONFIG_REGULATOR_RAA215300 is not set
CONFIG_REGULATOR_RT4801=m
CONFIG_REGULATOR_RT4803=m
CONFIG_REGULATOR_RT4831=m
CONFIG_REGULATOR_RT5033=m
CONFIG_REGULATOR_RT5120=m
CONFIG_REGULATOR_RT5190A=m
CONFIG_REGULATOR_RT5739=m
CONFIG_REGULATOR_RT5759=m
CONFIG_REGULATOR_RT6160=m
CONFIG_REGULATOR_RT6190=m
CONFIG_REGULATOR_RT6245=m
# CONFIG_REGULATOR_RT8092 is not set
CONFIG_REGULATOR_RTQ2134=m
CONFIG_REGULATOR_RTMV20=m
CONFIG_REGULATOR_RTQ6752=m
# CONFIG_REGULATOR_RTQ2208 is not set
CONFIG_REGULATOR_SKY81452=m
# CONFIG_REGULATOR_SLG51000 is not set
CONFIG_REGULATOR_SY7636A=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65086=m
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS65185 is not set
CONFIG_REGULATOR_TPS6524X=m
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TPS68470=m
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_QCOM_LABIBB=m
CONFIG_RC_CORE=m
CONFIG_LIRC=y
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_RCMM_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_IR_ENE=m
CONFIG_IR_FINTEK=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_IMON=m
CONFIG_IR_IMON_RAW=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_STREAMZAP=m
CONFIG_IR_TOY=m
CONFIG_IR_TTUSBIR=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_RC_ATI_REMOTE=m
CONFIG_RC_LOOPBACK=m
CONFIG_RC_XBOX_DVD=m
CONFIG_CEC_CORE=m
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y
#
# CEC support
#
CONFIG_MEDIA_CEC_RC=y
# CONFIG_CEC_PIN_ERROR_INJ is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
CONFIG_CEC_NXP_TDA9950=m
CONFIG_CEC_CROS_EC=m
CONFIG_CEC_GPIO=m
CONFIG_CEC_SECO=m
CONFIG_CEC_SECO_RC=y
# CONFIG_USB_EXTRON_DA_HD_4K_PLUS_CEC is not set
CONFIG_USB_PULSE8_CEC=m
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FLASH_LED_CLASS=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
CONFIG_V4L2_CCI=m
CONFIG_V4L2_CCI_I2C=m
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
# end of Media controller options
#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_GSPCA=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_GL860=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
#
# Analog TV USB devices
#
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_STK1160=m
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_AS102=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_CXUSB_ANALOG is not set
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_VP7045=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=m
CONFIG_USB_HACKRF=m
CONFIG_USB_MSI2500=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
# CONFIG_VIDEO_MGB4 is not set
# CONFIG_VIDEO_SOLO6X10 is not set
CONFIG_VIDEO_TW5864=m
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_TW686X=m
# CONFIG_VIDEO_ZORAN is not set
#
# Media capture/analog TV support
#
CONFIG_VIDEO_DT3155=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not set
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7134_GO7007=m
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
CONFIG_DVB_DM1105=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NETUP_UNIDVB=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_DVB_SMIPCIE=m
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
# CONFIG_VIDEO_IPU3_CIO2 is not set
CONFIG_VIDEO_INTEL_IPU6=m
# CONFIG_INTEL_VSC is not set
# CONFIG_IPU_BRIDGE is not set
CONFIG_RADIO_ADAPTERS=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_RADIO_SI4713=m
CONFIG_RADIO_SI476X=m
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_TEF6862=m
CONFIG_USB_DSBR=m
CONFIG_USB_KEENE=m
CONFIG_USB_MA901=m
CONFIG_USB_MR800=m
CONFIG_USB_RAREMONO=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
#
# Allegro DVT media platform drivers
#
#
# Amlogic media platform drivers
#
#
# Amphion drivers
#
#
# ARM media platform drivers
#
#
# Aspeed media platform drivers
#
#
# Atmel media platform drivers
#
#
# Cadence media platform drivers
#
CONFIG_VIDEO_CADENCE_CSI2RX=m
CONFIG_VIDEO_CADENCE_CSI2TX=m
#
# Chips&Media media platform drivers
#
#
# Intel media platform drivers
#
#
# Marvell media platform drivers
#
CONFIG_VIDEO_CAFE_CCIC=m
#
# Mediatek media platform drivers
#
#
# Microchip Technology, Inc. media platform drivers
#
#
# Nuvoton media platform drivers
#
#
# NVidia media platform drivers
#
#
# NXP media platform drivers
#
#
# Qualcomm media platform drivers
#
#
# Raspberry Pi media platform drivers
#
# CONFIG_VIDEO_RP1_CFE is not set
#
# Renesas media platform drivers
#
#
# Rockchip media platform drivers
#
#
# Samsung media platform drivers
#
#
# STMicroelectronics media platform drivers
#
#
# Sunxi media platform drivers
#
#
# Texas Instruments drivers
#
#
# Verisilicon media platform drivers
#
#
# VIA media platform drivers
#
CONFIG_VIDEO_VIA_CAMERA=m
#
# Xilinx media platform drivers
#
#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=m
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_TEST_DRIVERS is not set
#
# FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_TTPCI_EEPROM=m
CONFIG_UVC_COMMON=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
# end of Media drivers
CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_CAMERA_SENSOR=y
# CONFIG_VIDEO_ALVIUM_CSI2 is not set
CONFIG_VIDEO_AR0521=m
# CONFIG_VIDEO_GC0308 is not set
# CONFIG_VIDEO_GC0310 is not set
# CONFIG_VIDEO_GC05A2 is not set
# CONFIG_VIDEO_GC08A3 is not set
# CONFIG_VIDEO_GC2145 is not set
CONFIG_VIDEO_HI556=m
CONFIG_VIDEO_HI846=m
CONFIG_VIDEO_HI847=m
# CONFIG_VIDEO_IMX111 is not set
CONFIG_VIDEO_IMX208=m
# CONFIG_VIDEO_IMX214 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX283 is not set
# CONFIG_VIDEO_IMX290 is not set
CONFIG_VIDEO_IMX296=m
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX355 is not set
CONFIG_VIDEO_MAX9271_LIB=m
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9M114 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T112 is not set
CONFIG_VIDEO_MT9V011=m
# CONFIG_VIDEO_MT9V111 is not set
CONFIG_VIDEO_OG01A1B=m
# CONFIG_VIDEO_OG0VE1B is not set
# CONFIG_VIDEO_OS05B10 is not set
# CONFIG_VIDEO_OV01A10 is not set
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV02E10 is not set
# CONFIG_VIDEO_OV02C10 is not set
CONFIG_VIDEO_OV08D10=m
CONFIG_VIDEO_OV08X40=m
# CONFIG_VIDEO_OV13858 is not set
CONFIG_VIDEO_OV13B10=m
CONFIG_VIDEO_OV2640=m
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV2735 is not set
# CONFIG_VIDEO_OV2740 is not set
CONFIG_VIDEO_OV4689=m
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV5670 is not set
CONFIG_VIDEO_OV5675=m
CONFIG_VIDEO_OV5693=m
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV6211 is not set
# CONFIG_VIDEO_OV64A40 is not set
# CONFIG_VIDEO_OV7251 is not set
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV8858 is not set
# CONFIG_VIDEO_OV8865 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV9734 is not set
CONFIG_VIDEO_RDACM20=m
CONFIG_VIDEO_RDACM21=m
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5C73M3 is not set
# CONFIG_VIDEO_S5K3M5 is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5KJN1 is not set
# CONFIG_VIDEO_T4KA3 is not set
# CONFIG_VIDEO_VD55G1 is not set
# CONFIG_VIDEO_VD56G3 is not set
# CONFIG_VIDEO_CCS is not set
# CONFIG_VIDEO_ET8EK8 is not set
#
# Camera ISPs
#
# CONFIG_VIDEO_THP7312 is not set
# end of Camera ISPs
CONFIG_VIDEO_CAMERA_LENS=y
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9719 is not set
CONFIG_VIDEO_DW9768=m
# CONFIG_VIDEO_DW9807_VCM is not set
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices
#
# audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SONY_BTF_MPX=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_SAA6752HS=m
CONFIG_VIDEO_M52790=m
#
# Video serializers and deserializers
#
# CONFIG_VIDEO_MAX96717 is not set
# end of Video serializers and deserializers
#
# SPI I2C drivers auto-selected by 'Autoselect ancillary drivers'
#
#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
# CONFIG_VIDEO_GS1662 is not set
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Tuner drivers auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m
#
# DVB Frontend drivers auto-selected by 'Autoselect ancillary drivers'
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_TDA10071=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_EC100=m
CONFIG_DVB_GP8PSK_FE=m
CONFIG_DVB_L64781=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_ZL10353=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_VES1820=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_MXL692=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_HELENE=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_DRX39XYJ=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_SCREEN_INFO=y
CONFIG_VIDEO=y
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=m
CONFIG_HD44780_COMMON=m
# CONFIG_HD44780 is not set
# CONFIG_LCD2S is not set
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_LINEDISP=m
CONFIG_IMG_ASCII_LCD=m
CONFIG_HT16K33=m
# CONFIG_MAX6959 is not set
# CONFIG_SEG_LED_GPIO is not set
CONFIG_PANEL=m
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_INTEL_GTT=m
CONFIG_VGA_SWITCHEROO=y
CONFIG_GPU_BUDDY=y
CONFIG_DRM=m
#
# DRM debugging options
#
# CONFIG_DRM_DEBUG_MM is not set
# end of DRM debugging options
CONFIG_DRM_MIPI_DBI=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_PANIC is not set
# CONFIG_DRM_RAS is not set
CONFIG_DRM_CLIENT=y
CONFIG_DRM_CLIENT_LIB=m
CONFIG_DRM_CLIENT_SELECTION=m
CONFIG_DRM_CLIENT_SETUP=y
#
# Supported DRM clients
#
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_CLIENT_LOG is not set
CONFIG_DRM_CLIENT_DEFAULT_FBDEV=y
CONFIG_DRM_CLIENT_DEFAULT="fbdev"
# end of Supported DRM clients
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_AUX_CEC=y
CONFIG_DRM_DISPLAY_DP_AUX_CHARDEV=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_DP_TUNNEL=y
CONFIG_DRM_DISPLAY_DSC_HELPER=y
CONFIG_DRM_DISPLAY_HDCP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_CEC_NOTIFIER_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
CONFIG_DRM_TTM=m
CONFIG_DRM_EXEC=m
CONFIG_DRM_GPUVM=m
CONFIG_DRM_GPUSVM=m
CONFIG_DRM_BUDDY=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_DMA_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
CONFIG_DRM_SUBALLOC_HELPER=m
CONFIG_DRM_SCHED=m
CONFIG_DRM_PANEL_BACKLIGHT_QUIRKS=m
CONFIG_DRM_PRIVACY_SCREEN=y
CONFIG_DRM_AMDGPU=m
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y
# CONFIG_DRM_AMD_ISP is not set
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration
#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
CONFIG_DRM_AMD_DC_FP=y
# CONFIG_DRM_AMD_DC_SI is not set
CONFIG_DRM_AMD_SECURE_DISPLAY=y
# end of Display Engine Configuration
CONFIG_HSA_AMD=y
CONFIG_HSA_AMD_SVM=y
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_AST=m
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_ANALOGIX_DP=m
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_GMA500=m
CONFIG_DRM_GUD=m
# CONFIG_DRM_HISI_HIBMC is not set
CONFIG_DRM_HYPERV=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT_KVMGT=m
CONFIG_DRM_I915_PXP=y
CONFIG_DRM_I915_DP_TUNNEL=y
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_PREEMPT_TIMEOUT_COMPUTE=7500
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
CONFIG_DRM_I915_GVT=y
CONFIG_DRM_MGAG200=m
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
# CONFIG_NOUVEAU_DEBUG_PUSH is not set
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_SVM=y
CONFIG_DRM_NOUVEAU_CH7006=m
CONFIG_DRM_NOUVEAU_SIL164=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_AUO_A030JTN01 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set
# CONFIG_DRM_PANEL_ORISETECH_OTA5601A is not set
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
CONFIG_DRM_PANEL_WIDECHIPS_WS2401=m
# end of Display Panels
CONFIG_DRM_QXL=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
# CONFIG_DRM_ST7571 is not set
# CONFIG_DRM_ST7586 is not set
# CONFIG_DRM_ST7735R is not set
# CONFIG_DRM_ST7920 is not set
CONFIG_DRM_SSD130X=m
CONFIG_DRM_SSD130X_I2C=m
# CONFIG_DRM_SSD130X_SPI is not set
#
# Drivers for system framebuffers
#
CONFIG_DRM_SYSFB_HELPER=m
# CONFIG_DRM_EFIDRM is not set
CONFIG_DRM_SIMPLEDRM=m
# CONFIG_DRM_VESADRM is not set
# end of Drivers for system framebuffers
# CONFIG_DRM_APPLETBDRM is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_GM12U320=m
CONFIG_DRM_PANEL_MIPI_DBI=m
# CONFIG_DRM_PIXPAPER is not set
CONFIG_TINYDRM_HX8357D=m
CONFIG_TINYDRM_ILI9163=m
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
CONFIG_TINYDRM_MI0283QT=m
CONFIG_TINYDRM_REPAPER=m
# CONFIG_TINYDRM_SHARP_MEMORY is not set
CONFIG_DRM_UDL=m
CONFIG_DRM_VBOXVIDEO=m
CONFIG_DRM_VGEM=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_VIRTIO_GPU_KMS=y
CONFIG_DRM_VKMS=m
CONFIG_DRM_VMWGFX=m
# CONFIG_DRM_VMWGFX_MKSSTATS is not set
CONFIG_DRM_XE=m
CONFIG_DRM_XE_DISPLAY=y
CONFIG_DRM_XE_DP_TUNNEL=y
CONFIG_DRM_XE_GPUSVM=y
CONFIG_DRM_XE_PAGEMAP=y
CONFIG_DRM_XE_FORCE_PROBE=""
CONFIG_DRM_XE_JOB_TIMEOUT_MAX=10000
CONFIG_DRM_XE_JOB_TIMEOUT_MIN=1
CONFIG_DRM_XE_TIMESLICE_MAX=10000000
CONFIG_DRM_XE_TIMESLICE_MIN=1
CONFIG_DRM_XE_PREEMPT_TIMEOUT=640000
CONFIG_DRM_XE_PREEMPT_TIMEOUT_MAX=10000000
CONFIG_DRM_XE_PREEMPT_TIMEOUT_MIN=1
CONFIG_DRM_XE_ENABLE_SCHEDTIMEOUT_LIMIT=y
CONFIG_DRM_XEN=y
CONFIG_DRM_XEN_FRONTEND=m
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
CONFIG_FB_OPENCORES=m
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
CONFIG_FB_VIA=m
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_VIA_X_COMPATIBILITY=y
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=m
CONFIG_FB_IBM_GXT4500=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=m
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
CONFIG_FB_SSD1307=m
CONFIG_FB_SM712=m
CONFIG_FB_CORE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DEVICE=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYSMEM_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_DMAMEM_HELPERS=y
CONFIG_FB_DMAMEM_HELPERS_DEFERRED=y
CONFIG_FB_IOMEM_FOPS=y
CONFIG_FB_IOMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI922X=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=m
CONFIG_LCD_HX8357=m
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_AW99706 is not set
CONFIG_BACKLIGHT_KTD253=m
# CONFIG_BACKLIGHT_KTD2801 is not set
CONFIG_BACKLIGHT_KTZ8866=m
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_DA9052=m
CONFIG_BACKLIGHT_APPLE=m
CONFIG_BACKLIGHT_QCOM_WLED=m
CONFIG_BACKLIGHT_RT4831=m
CONFIG_BACKLIGHT_SAHARA=m
# CONFIG_BACKLIGHT_WM831X is not set
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
# CONFIG_BACKLIGHT_LM3509 is not set
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_MP3309C is not set
CONFIG_BACKLIGHT_SKY81452=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support
CONFIG_VGASTATE=m
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
CONFIG_FIRMWARE_EDID=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
# end of Console display driver support
# CONFIG_LOGO is not set
# CONFIG_TRACE_GPU_MEM is not set
# end of Graphics support
CONFIG_DRM_ACCEL=y
# CONFIG_DRM_ACCEL_AMDXDNA is not set
# CONFIG_DRM_ACCEL_HABANALABS is not set
CONFIG_DRM_ACCEL_IVPU=m
# CONFIG_DRM_ACCEL_IVPU_DEBUG is not set
CONFIG_DRM_ACCEL_QAIC=m
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
# CONFIG_SND_UTIMER is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_CTL_LED=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
# CONFIG_SND_SEQ_UMP is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
# CONFIG_SND_PCMTEST is not set
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=1
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
# CONFIG_SND_ES1968_RADIO is not set
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=1
# CONFIG_SND_HDA_CTL_DEV_ID is not set
CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_ACPI is not set
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
# CONFIG_SND_HDA_CODEC_SENARYTECH is not set
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
# CONFIG_SND_HDA_CODEC_CM9825 is not set
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_REALTEK_LIB=m
CONFIG_SND_HDA_CODEC_ALC260=m
CONFIG_SND_HDA_CODEC_ALC262=m
CONFIG_SND_HDA_CODEC_ALC268=m
CONFIG_SND_HDA_CODEC_ALC269=m
CONFIG_SND_HDA_CODEC_ALC662=m
CONFIG_SND_HDA_CODEC_ALC680=m
CONFIG_SND_HDA_CODEC_ALC861=m
CONFIG_SND_HDA_CODEC_ALC861VD=m
CONFIG_SND_HDA_CODEC_ALC880=m
CONFIG_SND_HDA_CODEC_ALC882=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CS420X=m
CONFIG_SND_HDA_CODEC_CS421X=m
CONFIG_SND_HDA_CODEC_CS8409=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_HDMI_GENERIC=m
CONFIG_SND_HDA_CODEC_HDMI_SIMPLE=m
CONFIG_SND_HDA_CODEC_HDMI_INTEL=m
CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM=y
CONFIG_SND_HDA_CODEC_HDMI_ATI=m
CONFIG_SND_HDA_CODEC_HDMI_NVIDIA=m
CONFIG_SND_HDA_CODEC_HDMI_NVIDIA_MCP=m
CONFIG_SND_HDA_CODEC_HDMI_TEGRA=m
CONFIG_SND_HDA_CIRRUS_SCODEC=m
CONFIG_SND_HDA_SCODEC_CS35L41=m
CONFIG_SND_HDA_SCODEC_COMPONENT=m
CONFIG_SND_HDA_SCODEC_CS35L41_I2C=m
CONFIG_SND_HDA_SCODEC_CS35L41_SPI=m
CONFIG_SND_HDA_SCODEC_CS35L56=m
CONFIG_SND_HDA_SCODEC_CS35L56_I2C=m
CONFIG_SND_HDA_SCODEC_CS35L56_SPI=m
#
# CS35L56 driver options
#
# CONFIG_SND_HDA_SCODEC_CS35L56_CAL_DEBUGFS is not set
# end of CS35L56 driver options
CONFIG_SND_HDA_SCODEC_TAS2781=m
CONFIG_SND_HDA_SCODEC_TAS2781_I2C=m
CONFIG_SND_HDA_SCODEC_TAS2781_SPI=m
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=m
# CONFIG_SND_INTEL_BYT_PREFER_SOF is not set
# end of HD-Audio
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_AUDIO_MIDI_V2 is not set
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_US144MKII=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
# CONFIG_SND_BCD2000 is not set
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
CONFIG_SND_OXFW=m
# CONFIG_SND_ISIGHT is not set
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
CONFIG_SND_FIREWIRE_DIGI00X=m
CONFIG_SND_FIREWIRE_TASCAM=m
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_ACPI=m
# CONFIG_SND_SOC_USB is not set
#
# Analog Devices
#
# CONFIG_SND_SOC_ADI_AXI_I2S is not set
# CONFIG_SND_SOC_ADI_AXI_SPDIF is not set
# end of Analog Devices
#
# AMD
#
CONFIG_SND_SOC_AMD_ACP=m
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
CONFIG_SND_SOC_AMD_ST_ES8336_MACH=m
CONFIG_SND_SOC_AMD_ACP3x=m
CONFIG_SND_SOC_AMD_RV_RT5682_MACH=m
CONFIG_SND_SOC_AMD_RENOIR=m
CONFIG_SND_SOC_AMD_RENOIR_MACH=m
CONFIG_SND_SOC_AMD_ACP5x=m
CONFIG_SND_SOC_AMD_VANGOGH_MACH=m
CONFIG_SND_SOC_AMD_ACP6x=m
CONFIG_SND_SOC_AMD_YC_MACH=m
CONFIG_SND_AMD_ACP_CONFIG=m
CONFIG_SND_SOC_AMD_ACP_COMMON=m
CONFIG_SND_SOC_ACPI_AMD_MATCH=m
CONFIG_SND_SOC_ACPI_AMD_SDCA_QUIRKS=m
CONFIG_SND_SOC_AMD_ACP_PDM=m
CONFIG_SND_SOC_AMD_ACP_LEGACY_COMMON=m
CONFIG_SND_SOC_AMD_ACP_I2S=m
CONFIG_SND_SOC_AMD_ACPI_MACH=m
CONFIG_SND_SOC_AMD_ACP_PCM=m
CONFIG_SND_SOC_AMD_ACP_PCI=m
CONFIG_SND_AMD_ASOC_RENOIR=m
CONFIG_SND_AMD_ASOC_REMBRANDT=m
# CONFIG_SND_AMD_ASOC_ACP63 is not set
# CONFIG_SND_AMD_ASOC_ACP70 is not set
CONFIG_SND_SOC_AMD_MACH_COMMON=m
CONFIG_SND_SOC_AMD_LEGACY_MACH=m
CONFIG_SND_SOC_AMD_SOF_MACH=m
# CONFIG_SND_SOC_AMD_SOF_SDW_MACH is not set
# CONFIG_SND_SOC_AMD_LEGACY_SDW_MACH is not set
CONFIG_SND_AMD_SOUNDWIRE_ACPI=m
CONFIG_SND_SOC_AMD_ACP63_TOPLEVEL=m
CONFIG_SND_SOC_AMD_SOUNDWIRE_LINK_BASELINE=m
CONFIG_SND_SOC_AMD_SOUNDWIRE=m
CONFIG_SND_SOC_AMD_PS=m
CONFIG_SND_SOC_AMD_PS_MACH=m
# end of AMD
#
# Apple
#
# end of Apple
#
# Atmel
#
# end of Atmel
#
# Au1x
#
# end of Au1x
#
# Broadcom
#
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
# end of Broadcom
#
# Cirrus Logic
#
# end of Cirrus Logic
#
# DesignWare
#
CONFIG_SND_DESIGNWARE_I2S=m
# CONFIG_SND_DESIGNWARE_PCM is not set
# end of DesignWare
#
# Freescale
#
#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
CONFIG_SND_SOC_FSL_AUDMIX=m
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
CONFIG_SND_SOC_FSL_MICFIL=m
# CONFIG_SND_SOC_FSL_XCVR is not set
CONFIG_SND_SOC_FSL_UTILS=m
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# end of Freescale
#
# Google
#
# CONFIG_SND_SOC_CHV3_I2S is not set
# end of Google
#
# Hisilicon
#
# CONFIG_SND_I2S_HI6210_I2S is not set
# end of Hisilicon
#
# JZ4740
#
# end of JZ4740
#
# Kirkwood
#
# end of Kirkwood
#
# Loongson
#
# end of Loongson
#
# Intel
#
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SOC_INTEL_CATPT=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m
CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS=m
CONFIG_SND_SOC_INTEL_AVS=m
#
# Intel AVS Machine drivers
#
#
# Available DSP configurations
#
# CONFIG_SND_SOC_INTEL_AVS_CARDNAME_OBSOLETE is not set
CONFIG_SND_SOC_INTEL_AVS_MACH_DA7219=m
CONFIG_SND_SOC_INTEL_AVS_MACH_DMIC=m
CONFIG_SND_SOC_INTEL_AVS_MACH_ES8336=m
CONFIG_SND_SOC_INTEL_AVS_MACH_HDAUDIO=m
CONFIG_SND_SOC_INTEL_AVS_MACH_I2S_TEST=m
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98927=m
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98357A=m
CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98373=m
CONFIG_SND_SOC_INTEL_AVS_MACH_NAU8825=m
CONFIG_SND_SOC_INTEL_AVS_MACH_PCM3168A=m
CONFIG_SND_SOC_INTEL_AVS_MACH_PROBE=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT274=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT286=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT298=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5514=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5640=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5663=m
CONFIG_SND_SOC_INTEL_AVS_MACH_RT5682=m
CONFIG_SND_SOC_INTEL_AVS_MACH_SSM4567=m
# end of Intel AVS Machine drivers
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
CONFIG_SND_SOC_INTEL_HDA_DSP_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_MAXIM_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_REALTEK_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_CIRRUS_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_NUVOTON_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_TI_COMMON=m
CONFIG_SND_SOC_INTEL_SOF_BOARD_HELPERS=m
CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=m
CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_WM5102_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m
CONFIG_SND_SOC_INTEL_SOF_WM8804_MACH=m
CONFIG_SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m
CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=m
CONFIG_SND_SOC_INTEL_SOF_CS42L42_MACH=m
CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH=m
CONFIG_SND_SOC_INTEL_SOF_ES8336_MACH=m
CONFIG_SND_SOC_INTEL_SOF_NAU8825_MACH=m
CONFIG_SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH=m
CONFIG_SND_SOC_INTEL_SOF_DA7219_MACH=m
CONFIG_SND_SOC_INTEL_SOF_SSP_AMP_MACH=m
CONFIG_SND_SOC_INTEL_EHL_RT5660_MACH=m
CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=m
# end of Intel
#
# Mediatek
#
CONFIG_SND_SOC_MTK_BTCVSD=m
# end of Mediatek
#
# PXA
#
# end of PXA
#
# SoundWire (SDCA)
#
CONFIG_SND_SOC_SDCA=m
CONFIG_SND_SOC_SDCA_HID=y
CONFIG_SND_SOC_SDCA_IRQ=y
CONFIG_SND_SOC_SDCA_FDL=y
CONFIG_SND_SOC_SDCA_OPTIONAL=m
# CONFIG_SND_SOC_SDCA_CLASS is not set
# end of SoundWire (SDCA)
#
# ST SPEAr
#
# end of ST SPEAr
#
# Spreadtrum
#
# end of Spreadtrum
#
# STMicroelectronics STM32
#
# end of STMicroelectronics STM32
#
# Tegra
#
# end of Tegra
#
# Xilinx
#
CONFIG_SND_SOC_XILINX_I2S=m
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=m
CONFIG_SND_SOC_XILINX_SPDIF=m
# end of Xilinx
#
# Xtensa
#
CONFIG_SND_SOC_XTFPGA_I2S=m
# end of Xtensa
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI_DEV=m
CONFIG_SND_SOC_SOF_PCI=m
CONFIG_SND_SOC_SOF_ACPI=m
CONFIG_SND_SOC_SOF_ACPI_DEV=m
CONFIG_SND_SOC_SOF_DEBUG_PROBES=m
CONFIG_SND_SOC_SOF_CLIENT=m
CONFIG_SND_SOC_SOF=m
CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y
CONFIG_SND_SOC_SOF_IPC3=y
CONFIG_SND_SOC_SOF_IPC4=y
CONFIG_SND_SOC_SOF_AMD_TOPLEVEL=m
CONFIG_SND_SOC_SOF_AMD_COMMON=m
CONFIG_SND_SOC_SOF_AMD_RENOIR=m
# CONFIG_SND_SOC_SOF_AMD_VANGOGH is not set
CONFIG_SND_SOC_SOF_AMD_REMBRANDT=m
CONFIG_SND_SOC_SOF_ACP_PROBES=m
# CONFIG_SND_SOC_SOF_AMD_ACP63 is not set
# CONFIG_SND_SOC_SOF_AMD_ACP70 is not set
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=m
CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=m
CONFIG_SND_SOC_SOF_INTEL_COMMON=m
CONFIG_SND_SOC_SOF_BAYTRAIL=m
CONFIG_SND_SOC_SOF_BROADWELL=m
CONFIG_SND_SOC_SOF_MERRIFIELD=m
CONFIG_SND_SOC_SOF_INTEL_SKL=m
CONFIG_SND_SOC_SOF_SKYLAKE=m
CONFIG_SND_SOC_SOF_KABYLAKE=m
CONFIG_SND_SOC_SOF_INTEL_APL=m
CONFIG_SND_SOC_SOF_APOLLOLAKE=m
CONFIG_SND_SOC_SOF_GEMINILAKE=m
CONFIG_SND_SOC_SOF_INTEL_CNL=m
CONFIG_SND_SOC_SOF_CANNONLAKE=m
CONFIG_SND_SOC_SOF_COFFEELAKE=m
CONFIG_SND_SOC_SOF_COMETLAKE=m
CONFIG_SND_SOC_SOF_INTEL_ICL=m
CONFIG_SND_SOC_SOF_ICELAKE=m
CONFIG_SND_SOC_SOF_JASPERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_TGL=m
CONFIG_SND_SOC_SOF_TIGERLAKE=m
CONFIG_SND_SOC_SOF_ELKHARTLAKE=m
CONFIG_SND_SOC_SOF_ALDERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_MTL=m
CONFIG_SND_SOC_SOF_METEORLAKE=m
CONFIG_SND_SOC_SOF_INTEL_LNL=m
CONFIG_SND_SOC_SOF_LUNARLAKE=m
CONFIG_SND_SOC_SOF_INTEL_PTL=m
CONFIG_SND_SOC_SOF_PANTHERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_NVL=m
CONFIG_SND_SOC_SOF_NOVALAKE=m
CONFIG_SND_SOC_SOF_HDA_COMMON=m
CONFIG_SND_SOC_SOF_HDA_GENERIC=m
CONFIG_SND_SOC_SOF_HDA_MLINK=m
CONFIG_SND_SOC_SOF_HDA_LINK=y
CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC=y
CONFIG_SND_SOF_SOF_HDA_SDW_BPT=m
CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_HDA=m
CONFIG_SND_SOC_SOF_HDA_PROBES=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=m
CONFIG_SND_SOC_SOF_XTENSA=m
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
CONFIG_SND_SOC_ARIZONA=m
CONFIG_SND_SOC_WM_ADSP=m
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
CONFIG_SND_SOC_ADAU1372=m
CONFIG_SND_SOC_ADAU1372_I2C=m
CONFIG_SND_SOC_ADAU1372_SPI=m
CONFIG_SND_SOC_ADAU1373=m
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU1761_SPI=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_ADAU7118=m
CONFIG_SND_SOC_ADAU7118_HW=m
CONFIG_SND_SOC_ADAU7118_I2C=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4118=m
CONFIG_SND_SOC_AK4375=m
CONFIG_SND_SOC_AK4458=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_AK4619=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_AK5558=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_AUDIO_IIO_AUX=m
CONFIG_SND_SOC_AW8738=m
CONFIG_SND_SOC_AW88395_LIB=m
CONFIG_SND_SOC_AW88395=m
CONFIG_SND_SOC_AW88166=m
CONFIG_SND_SOC_AW88261=m
CONFIG_SND_SOC_AW88081=m
CONFIG_SND_SOC_AW87390=m
CONFIG_SND_SOC_AW88399=m
CONFIG_SND_SOC_BD28623=m
CONFIG_SND_SOC_BT_SCO=m
CONFIG_SND_SOC_CHV3_CODEC=m
CONFIG_SND_SOC_CROS_EC_CODEC=m
CONFIG_SND_SOC_CS_AMP_LIB=m
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS35L41_LIB=m
CONFIG_SND_SOC_CS35L41=m
CONFIG_SND_SOC_CS35L41_SPI=m
CONFIG_SND_SOC_CS35L41_I2C=m
CONFIG_SND_SOC_CS35L45=m
CONFIG_SND_SOC_CS35L45_SPI=m
CONFIG_SND_SOC_CS35L45_I2C=m
CONFIG_SND_SOC_CS35L56=m
CONFIG_SND_SOC_CS35L56_SHARED=m
CONFIG_SND_SOC_CS35L56_I2C=m
CONFIG_SND_SOC_CS35L56_SPI=m
CONFIG_SND_SOC_CS35L56_SDW=m
#
# CS35L56 driver options
#
# CONFIG_SND_SOC_CS35L56_CAL_DEBUGFS is not set
# CONFIG_SND_SOC_CS35L56_CAL_SET_CTRL is not set
# CONFIG_SND_SOC_CS35L56_CAL_PERFORM_CTRL is not set
# end of CS35L56 driver options
CONFIG_SND_SOC_CS42L42_CORE=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L42_SDW=m
CONFIG_SND_SOC_CS42L43=m
CONFIG_SND_SOC_CS42L43_SDW=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
CONFIG_SND_SOC_CS42L52=m
CONFIG_SND_SOC_CS42L56=m
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS42L83=m
CONFIG_SND_SOC_CS42L84=m
CONFIG_SND_SOC_CS4234=m
CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_CS4271_SPI=m
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
CONFIG_SND_SOC_CS4341=m
CONFIG_SND_SOC_CS4349=m
CONFIG_SND_SOC_CS48L32=m
CONFIG_SND_SOC_CS53L30=m
CONFIG_SND_SOC_CS530X=m
CONFIG_SND_SOC_CS530X_I2C=m
# CONFIG_SND_SOC_CS530X_SPI is not set
CONFIG_SND_SOC_CX2072X=m
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=m
CONFIG_SND_SOC_ES83XX_DSM_COMMON=m
CONFIG_SND_SOC_ES8311=m
CONFIG_SND_SOC_ES8316=m
CONFIG_SND_SOC_ES8323=m
CONFIG_SND_SOC_ES8326=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_ES8375=m
CONFIG_SND_SOC_ES8389=m
CONFIG_SND_SOC_FS_AMP_LIB=m
CONFIG_SND_SOC_FS210X=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_HDAC_HDA=m
CONFIG_SND_SOC_HDA=m
CONFIG_SND_SOC_ICS43432=m
CONFIG_SND_SOC_IDT821034=m
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX9867=m
CONFIG_SND_SOC_MAX98927=m
CONFIG_SND_SOC_MAX98520=m
CONFIG_SND_SOC_MAX98363=m
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
CONFIG_SND_SOC_MAX98373_SDW=m
CONFIG_SND_SOC_MAX98388=m
CONFIG_SND_SOC_MAX98390=m
CONFIG_SND_SOC_MAX98396=m
CONFIG_SND_SOC_MAX9860=m
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
CONFIG_SND_SOC_PCM1681=m
# CONFIG_SND_SOC_PCM1754 is not set
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
CONFIG_SND_SOC_PCM179X_SPI=m
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM186X_SPI=m
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
CONFIG_SND_SOC_PCM3060_SPI=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM3168A_SPI=m
CONFIG_SND_SOC_PCM5102A=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
CONFIG_SND_SOC_PCM512x_SPI=m
CONFIG_SND_SOC_PCM6240=m
CONFIG_SND_SOC_PEB2466=m
# CONFIG_SND_SOC_PM4125_SDW is not set
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT_SDW_COMMON=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT274=m
CONFIG_SND_SOC_RT286=m
CONFIG_SND_SOC_RT298=m
CONFIG_SND_SOC_RT1011=m
CONFIG_SND_SOC_RT1015=m
CONFIG_SND_SOC_RT1015P=m
CONFIG_SND_SOC_RT1017_SDCA_SDW=m
CONFIG_SND_SOC_RT1019=m
CONFIG_SND_SOC_RT1308=m
CONFIG_SND_SOC_RT1308_SDW=m
CONFIG_SND_SOC_RT1316_SDW=m
CONFIG_SND_SOC_RT1318_SDW=m
CONFIG_SND_SOC_RT1320_SDW=m
CONFIG_SND_SOC_RT5514=m
# CONFIG_SND_SOC_RT5575 is not set
CONFIG_SND_SOC_RT5616=m
CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
CONFIG_SND_SOC_RT5659=m
CONFIG_SND_SOC_RT5660=m
CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5670=m
CONFIG_SND_SOC_RT5677=m
CONFIG_SND_SOC_RT5677_SPI=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_I2C=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT5682S=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
CONFIG_SND_SOC_RT711_SDCA_SDW=m
CONFIG_SND_SOC_RT712_SDCA_SDW=m
CONFIG_SND_SOC_RT712_SDCA_DMIC_SDW=m
CONFIG_SND_SOC_RT721_SDCA_SDW=m
CONFIG_SND_SOC_RT722_SDCA_SDW=m
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
CONFIG_SND_SOC_RT715_SDCA_SDW=m
CONFIG_SND_SOC_RT9120=m
CONFIG_SND_SOC_RT9123=m
CONFIG_SND_SOC_RT9123P=m
CONFIG_SND_SOC_RTQ9124=m
CONFIG_SND_SOC_RTQ9128=m
# CONFIG_SND_SOC_SDW_MOCKUP is not set
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SI476X=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
CONFIG_SND_SOC_SIMPLE_MUX=m
CONFIG_SND_SOC_SMA1303=m
CONFIG_SND_SOC_SMA1307=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SRC4XXX_I2C=m
CONFIG_SND_SOC_SRC4XXX=m
CONFIG_SND_SOC_SSM2305=m
CONFIG_SND_SOC_SSM2518=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_SPI=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
CONFIG_SND_SOC_STA32X=m
CONFIG_SND_SOC_STA350=m
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SOC_TAS2552=m
CONFIG_SND_SOC_TAS2562=m
CONFIG_SND_SOC_TAS2764=m
CONFIG_SND_SOC_TAS2770=m
CONFIG_SND_SOC_TAS2780=m
CONFIG_SND_SOC_TAS2781_COMLIB=m
CONFIG_SND_SOC_TAS2781_COMLIB_I2C=m
CONFIG_SND_SOC_TAS2781_FMWLIB=m
CONFIG_SND_SOC_TAS2781_I2C=m
# CONFIG_SND_SOC_TAS2783_SDW is not set
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SOC_TAS5720=m
CONFIG_SND_SOC_TAS5805M=m
CONFIG_SND_SOC_TAS6424=m
CONFIG_SND_SOC_TDA7419=m
CONFIG_SND_SOC_TFA9879=m
CONFIG_SND_SOC_TFA989X=m
CONFIG_SND_SOC_TLV320ADC3XXX=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
CONFIG_SND_SOC_TLV320AIC23_SPI=m
CONFIG_SND_SOC_TLV320AIC31XX=m
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
CONFIG_SND_SOC_TLV320AIC32X4_SPI=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320AIC3X_I2C=m
CONFIG_SND_SOC_TLV320AIC3X_SPI=m
CONFIG_SND_SOC_TLV320ADCX140=m
CONFIG_SND_SOC_TS3A227E=m
CONFIG_SND_SOC_TSCS42XX=m
CONFIG_SND_SOC_TSCS454=m
CONFIG_SND_SOC_UDA1334=m
CONFIG_SND_SOC_UDA1342=m
# CONFIG_SND_SOC_UDA1380 is not set
CONFIG_SND_SOC_WCD_CLASSH=m
CONFIG_SND_SOC_WCD_COMMON=m
CONFIG_SND_SOC_WCD_MBHC=m
CONFIG_SND_SOC_WCD937X=m
CONFIG_SND_SOC_WCD937X_SDW=m
CONFIG_SND_SOC_WCD938X=m
CONFIG_SND_SOC_WCD938X_SDW=m
CONFIG_SND_SOC_WCD939X=m
CONFIG_SND_SOC_WCD939X_SDW=m
CONFIG_SND_SOC_WM5102=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8524=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8731_I2C=m
CONFIG_SND_SOC_WM8731_SPI=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8804_SPI=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
CONFIG_SND_SOC_WM8940=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8961=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_WM8998=m
CONFIG_SND_SOC_WSA881X=m
CONFIG_SND_SOC_WSA883X=m
CONFIG_SND_SOC_WSA884X=m
CONFIG_SND_SOC_ZL38060=m
CONFIG_SND_SOC_MAX9759=m
CONFIG_SND_SOC_MT6351=m
CONFIG_SND_SOC_MT6357=m
CONFIG_SND_SOC_MT6358=m
CONFIG_SND_SOC_MT6660=m
CONFIG_SND_SOC_NAU8315=m
# CONFIG_SND_SOC_NAU8325 is not set
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
CONFIG_SND_SOC_NAU8821=m
CONFIG_SND_SOC_NAU8822=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_NAU8825=m
CONFIG_SND_SOC_NTPFW=m
CONFIG_SND_SOC_NTP8918=m
CONFIG_SND_SOC_NTP8835=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SOC_LPASS_MACRO_COMMON=m
CONFIG_SND_SOC_LPASS_WSA_MACRO=m
CONFIG_SND_SOC_LPASS_VA_MACRO=m
CONFIG_SND_SOC_LPASS_RX_MACRO=m
CONFIG_SND_SOC_LPASS_TX_MACRO=m
# end of CODEC drivers
CONFIG_SND_SOC_SDW_UTILS=m
#
# Generic drivers
#
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
# end of Generic drivers
CONFIG_SND_X86=y
CONFIG_HDMI_LPE_AUDIO=m
CONFIG_SND_SYNTH_EMUX=m
# CONFIG_SND_XEN_FRONTEND is not set
CONFIG_SND_VIRTIO=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m
# CONFIG_HID_HAPTIC is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
# CONFIG_HID_APPLETB_BL is not set
# CONFIG_HID_APPLETB_KBD is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
CONFIG_HID_BIGBEN_FF=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CP2112=m
CONFIG_HID_CREATIVE_SB0540=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELAN=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EVISION=m
CONFIG_HID_EZKEY=m
CONFIG_HID_FT260=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_GLORIOUS=m
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
CONFIG_HID_VIVALDI_COMMON=m
# CONFIG_HID_GOODIX_SPI is not set
CONFIG_HID_GOOGLE_HAMMER=m
# CONFIG_HID_GOOGLE_STADIA_FF is not set
CONFIG_HID_VIVALDI=m
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
# CONFIG_HID_KYSONA is not set
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=m
CONFIG_HID_VRC2=m
CONFIG_HID_XIAOMI=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
# CONFIG_HID_LENOVO_GO is not set
# CONFIG_HID_LENOVO_GO_S is not set
CONFIG_HID_LETSKETCH=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MALTRON=m
CONFIG_HID_MAYFLASH=m
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NINTENDO=m
CONFIG_NINTENDO_FF=y
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=m
# CONFIG_HID_NVIDIA_SHIELD is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PLAYSTATION=m
CONFIG_PLAYSTATION_FF=y
CONFIG_HID_PXRC=m
# CONFIG_HID_RAPOO is not set
CONFIG_HID_RAZER=m
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SEMITEK=m
CONFIG_HID_SIGMAMICRO=m
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
# CONFIG_STEAM_FF is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_TOPRE=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_U2FZERO=m
CONFIG_HID_UNIVERSAL_PIDFF=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_WINWING is not set
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# CONFIG_HID_MCP2200 is not set
CONFIG_HID_MCP2221=m
# CONFIG_HID_HUAWEI is not set
# end of Special HID drivers
#
# HID-BPF support
#
# CONFIG_HID_BPF is not set
# end of HID-BPF support
CONFIG_I2C_HID=m
CONFIG_I2C_HID_ACPI=m
CONFIG_I2C_HID_OF=m
CONFIG_I2C_HID_CORE=m
#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER=m
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
CONFIG_AMD_SFH_HID=m
# end of AMD SFH HID Support
#
# Surface System Aggregator Module HID support
#
CONFIG_SURFACE_HID=m
CONFIG_SURFACE_KBD=m
# end of Surface System Aggregator Module HID support
CONFIG_SURFACE_HID_CORE=m
#
# Intel THC HID Support
#
# CONFIG_INTEL_THC_HID is not set
# end of Intel THC HID Support
#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=m
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_PCI=y
CONFIG_USB_PCI_AMD=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_DEFAULT_AUTHORIZATION_MODE=1
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=m
CONFIG_USB_XHCI_PCI_RENESAS=m
CONFIG_USB_XHCI_PLATFORM=m
# CONFIG_USB_XHCI_SIDEBAND is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
CONFIG_USB_EHCI_FSL=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PCI=m
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
# CONFIG_USB_HCD_TEST_MODE is not set
CONFIG_USB_XEN_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VUDC=m
# CONFIG_USBIP_DEBUG is not set
#
# USB dual-mode controller drivers
#
CONFIG_USB_CDNS_SUPPORT=m
CONFIG_USB_CDNS_HOST=y
CONFIG_USB_CDNS3=m
CONFIG_USB_CDNS3_GADGET=y
CONFIG_USB_CDNS3_HOST=y
CONFIG_USB_CDNS3_PCI_WRAP=m
CONFIG_USB_CDNSP_PCI=m
# CONFIG_USB_CDNSP_GADGET is not set
# CONFIG_USB_CDNSP_HOST is not set
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y
#
# Platform Glue Layer
#
#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=m
CONFIG_USB_DWC3_HAPS=m
# CONFIG_USB_DWC3_GOOGLE is not set
# CONFIG_USB_DWC2 is not set
CONFIG_USB_CHIPIDEA=m
# CONFIG_USB_CHIPIDEA_UDC is not set
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_PCI=m
CONFIG_USB_CHIPIDEA_MSM=m
CONFIG_USB_CHIPIDEA_NPCM=m
CONFIG_USB_CHIPIDEA_GENERIC=m
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_F8153X=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_XR=m
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_APPLE_MFI_FASTCHARGE=m
# CONFIG_USB_LJCA is not set
# CONFIG_USB_USBIO is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HUB_USB251XB=m
CONFIG_USB_HSIC_USB3503=m
CONFIG_USB_HSIC_USB4604=m
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_USB_GPIO_VBUS=m
CONFIG_TAHVO_USB=m
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
CONFIG_USB_ISP1301=m
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y
#
# USB Peripheral Controller
#
CONFIG_USB_GR_UDC=m
CONFIG_USB_R8A66597=m
CONFIG_USB_PXA27X=m
CONFIG_USB_SNP_CORE=m
CONFIG_USB_M66592=m
CONFIG_USB_BDC_UDC=m
CONFIG_USB_AMD5536UDC=m
CONFIG_USB_NET2280=m
CONFIG_USB_GOKU=m
CONFIG_USB_EG20T=m
# CONFIG_USB_MAX3420_UDC is not set
# CONFIG_USB_CDNS2_UDC is not set
CONFIG_USB_DUMMY_HCD=m
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_U_AUDIO=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_F_NCM=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_PHONET=m
CONFIG_USB_F_EEM=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_RNDIS=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_UAC1=m
CONFIG_USB_F_UVC=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_HID=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_F_TCM=m
CONFIG_USB_CONFIGFS=m
# CONFIG_USB_CONFIGFS_SERIAL is not set
# CONFIG_USB_CONFIGFS_ACM is not set
# CONFIG_USB_CONFIGFS_OBEX is not set
# CONFIG_USB_CONFIGFS_NCM is not set
# CONFIG_USB_CONFIGFS_ECM is not set
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
# CONFIG_USB_CONFIGFS_RNDIS is not set
# CONFIG_USB_CONFIGFS_EEM is not set
# CONFIG_USB_CONFIGFS_PHONET is not set
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
# CONFIG_USB_CONFIGFS_F_FS is not set
# CONFIG_USB_CONFIGFS_F_UAC1 is not set
# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
# CONFIG_USB_CONFIGFS_F_UAC2 is not set
# CONFIG_USB_CONFIGFS_F_MIDI is not set
# CONFIG_USB_CONFIGFS_F_MIDI2 is not set
# CONFIG_USB_CONFIGFS_F_HID is not set
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y
#
# USB Gadget precomposed configurations
#
# CONFIG_USB_ZERO is not set
CONFIG_USB_AUDIO=m
CONFIG_GADGET_UAC1=y
# CONFIG_GADGET_UAC1_LEGACY is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
# CONFIG_USB_FUNCTIONFS_ETH is not set
# CONFIG_USB_FUNCTIONFS_RNDIS is not set
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_GADGET_TARGET=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_USB_G_NOKIA=m
CONFIG_USB_G_ACM_MS=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_RNDIS=y
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=m
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=m
# CONFIG_USB_RAW_GADGET is not set
# end of USB Gadget precomposed configurations
CONFIG_TYPEC=m
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=m
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=m
# CONFIG_UCSI_STM32G0 is not set
CONFIG_CROS_EC_UCSI=m
CONFIG_TYPEC_TPS6598X=m
# CONFIG_TYPEC_ANX7411 is not set
CONFIG_TYPEC_RT1719=m
CONFIG_TYPEC_HD3SS3220=m
CONFIG_TYPEC_STUSB160X=m
CONFIG_TYPEC_WUSB3801=m
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_FSA4480 is not set
CONFIG_TYPEC_MUX_GPIO_SBU=m
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
CONFIG_TYPEC_MUX_INTEL_PMC=m
# CONFIG_TYPEC_MUX_IT5205 is not set
# CONFIG_TYPEC_MUX_NB7VPQ904M is not set
# CONFIG_TYPEC_MUX_PS883X is not set
# CONFIG_TYPEC_MUX_PTN36502 is not set
# CONFIG_TYPEC_MUX_TUSB1046 is not set
# CONFIG_TYPEC_MUX_WCD939X_USBSS is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=m
CONFIG_TYPEC_NVIDIA_ALTMODE=m
# CONFIG_TYPEC_TBT_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
CONFIG_USB_ROLE_SWITCH=m
CONFIG_USB_ROLES_INTEL_XHCI=m
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
CONFIG_MMC_CRYPTO=y
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_UHS2=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_ALCOR=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_CQHCI=m
CONFIG_MMC_HSQ=m
CONFIG_MMC_TOSHIBA_PCI=m
CONFIG_MMC_MTK=m
# CONFIG_MMC_SDHCI_XENON is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_CRYPTO=y
CONFIG_SCSI_UFS_HWMON=y
CONFIG_SCSI_UFSHCD_PCI=m
CONFIG_SCSI_UFS_DWC_TC_PCI=m
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_UFS_CDNS_PLATFORM=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_CLASS_MULTICOLOR=m
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
CONFIG_LEDS_APU=m
# CONFIG_LEDS_OSRAM_AMS_AS3668 is not set
# CONFIG_LEDS_AW200XX is not set
CONFIG_LEDS_CROS_EC=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=m
# CONFIG_LEDS_MT6323 is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=m
# CONFIG_LEDS_PCA995X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2606MVV=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_MENF21BMC=m
# CONFIG_LEDS_IS31FL319X is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_BLINKM_MULTICOLOR is not set
CONFIG_LEDS_MLXCPLD=m
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=m
CONFIG_LEDS_NIC78BX=m
# CONFIG_LEDS_SPI_BYTE is not set
CONFIG_LEDS_TPS6105X=m
#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AS3645A=m
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_RT8515 is not set
CONFIG_LEDS_SGM3140=m
#
# RGB LED drivers
#
# CONFIG_LEDS_KTD202X is not set
# CONFIG_LEDS_LP5812 is not set
# CONFIG_LEDS_PWM_MULTICOLOR is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=m
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_TTY=m
# CONFIG_LEDS_TRIGGER_INPUT_EVENTS is not set
#
# Simatic LED drivers
#
CONFIG_LEDS_SIEMENS_SIMATIC_IPC=m
CONFIG_LEDS_SIEMENS_SIMATIC_IPC_APOLLOLAKE=m
CONFIG_LEDS_SIEMENS_SIMATIC_IPC_F7188X=m
CONFIG_LEDS_SIEMENS_SIMATIC_IPC_ELKHARTLAKE=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# end of Speakup console speech
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_INFINIBAND_BNXT_RE=m
CONFIG_INFINIBAND_CXGB4=m
CONFIG_INFINIBAND_EFA=m
# CONFIG_INFINIBAND_ERDMA is not set
CONFIG_INFINIBAND_HFI1=m
# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
# CONFIG_SDMA_VERBOSITY is not set
CONFIG_MANA_INFINIBAND=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_QEDR=m
CONFIG_INFINIBAND_USNIC=m
CONFIG_INFINIBAND_VMWARE_PVRDMA=m
CONFIG_INFINIBAND_RDMAVT=m
CONFIG_RDMA_RXE=m
# CONFIG_RDMA_SIW is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_INFINIBAND_RTRS=m
CONFIG_INFINIBAND_RTRS_CLIENT=m
CONFIG_INFINIBAND_RTRS_SERVER=m
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_GHES is not set
# CONFIG_EDAC_SCRUB is not set
# CONFIG_EDAC_ECS is not set
# CONFIG_EDAC_MEM_REPAIR is not set
CONFIG_EDAC_AMD64=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
CONFIG_EDAC_I10NM=m
# CONFIG_EDAC_IMH is not set
CONFIG_EDAC_PND2=m
# CONFIG_EDAC_IGEN6 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
# CONFIG_RTC_DRV_MAX31335 is not set
CONFIG_RTC_DRV_NCT6694=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF85363=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8010=m
# CONFIG_RTC_DRV_RX8111 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3028=m
CONFIG_RTC_DRV_RV3032=m
CONFIG_RTC_DRV_RV8803=m
# CONFIG_RTC_DRV_SD2405AL is not set
CONFIG_RTC_DRV_SD3078=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1302=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1343=m
CONFIG_RTC_DRV_DS1347=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6916=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RX4581=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_MCP795=m
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y
CONFIG_RTC_DRV_RX6110=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=m
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_DA9063=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_WM831X=m
# CONFIG_RTC_DRV_CROS_EC is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
CONFIG_RTC_DRV_PCAP=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_MT6397=m
# CONFIG_RTC_DRV_GOLDFISH is not set
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=m
CONFIG_DMA_ACPI=y
CONFIG_ALTERA_MSGDMA=m
CONFIG_INTEL_IDMA64=m
CONFIG_INTEL_IDXD_BUS=m
CONFIG_INTEL_IDXD=m
# CONFIG_INTEL_IDXD_COMPAT is not set
# CONFIG_INTEL_IDXD_SVM is not set
CONFIG_INTEL_IDXD_PERFMON=y
CONFIG_INTEL_IOATDMA=m
CONFIG_PLX_DMA=m
# CONFIG_SWITCHTEC_DMA is not set
# CONFIG_XILINX_DMA is not set
CONFIG_XILINX_XDMA=m
# CONFIG_AMD_AE4DMA is not set
CONFIG_AMD_PTDMA=m
# CONFIG_AMD_QDMA is not set
CONFIG_QCOM_HIDMA_MGMT=m
CONFIG_QCOM_HIDMA=m
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=m
# CONFIG_DW_EDMA is not set
CONFIG_HSU_DMA=m
# CONFIG_SF_PDMA is not set
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options
CONFIG_DCA=m
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_UIO_MF624=m
CONFIG_UIO_HV_GENERIC=m
CONFIG_UIO_DFL=m
# CONFIG_UIO_PCI_GENERIC_SVA is not set
CONFIG_VFIO=m
# CONFIG_VFIO_DEVICE_CDEV is not set
CONFIG_VFIO_GROUP=y
CONFIG_VFIO_CONTAINER=y
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_VIRQFD=y
# CONFIG_VFIO_DEBUGFS is not set
#
# VFIO support for PCI devices
#
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
CONFIG_VFIO_PCI_VGA=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_MLX5_VFIO_PCI=m
# CONFIG_PDS_VFIO_PCI is not set
# CONFIG_VIRTIO_VFIO_PCI is not set
# CONFIG_XE_VFIO_PCI is not set
# end of VFIO support for PCI devices
CONFIG_VFIO_MDEV=m
CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
CONFIG_VBOXGUEST=m
CONFIG_NITRO_ENCLAVES=m
# CONFIG_EFI_SECRET is not set
CONFIG_SEV_GUEST=m
CONFIG_TDX_GUEST_DRIVER=m
CONFIG_TSM_GUEST=y
CONFIG_TSM_REPORTS=m
CONFIG_TSM_MEASUREMENTS=y
CONFIG_TSM=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=m
CONFIG_VIRTIO_PCI_LIB=m
CONFIG_VIRTIO_PCI_LIB_LEGACY=m
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_ADMIN_LEGACY=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MEM=m
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VIRTIO_DEBUG is not set
# CONFIG_VIRTIO_RTC is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST_TASK=y
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL=y
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
# CONFIG_HYPERV_VTL_MODE is not set
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
CONFIG_HYPERV_VMBUS=m
# CONFIG_MSHV_ROOT is not set
# end of Microsoft Hyper-V guest support
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_MEMORY_HOTPLUG_LIMIT=512
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=m
CONFIG_XEN_GNTDEV_DMABUF=y
CONFIG_XEN_GRANT_DEV_ALLOC=m
CONFIG_XEN_GRANT_DMA_ALLOC=y
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PCI_STUB=y
CONFIG_XEN_PCIDEV_BACKEND=m
CONFIG_XEN_PVCALLS_FRONTEND=m
# CONFIG_XEN_PVCALLS_BACKEND is not set
CONFIG_XEN_SCSI_BACKEND=m
CONFIG_XEN_PRIVCMD=m
# CONFIG_XEN_PRIVCMD_EVENTFD is not set
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_XEN_FRONT_PGDIR_SHBUF=m
CONFIG_XEN_UNPOPULATED_ALLOC=y
CONFIG_XEN_GRANT_DMA_OPS=y
CONFIG_XEN_VIRTIO=y
# CONFIG_XEN_VIRTIO_FORCE_GRANT is not set
# end of Xen driver support
CONFIG_GREYBUS=m
# CONFIG_GREYBUS_BEAGLEPLAY is not set
CONFIG_GREYBUS_ES2=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_PCI_DRIVERS=m
CONFIG_COMEDI_8255_PCI=m
CONFIG_COMEDI_ADDI_WATCHDOG=m
CONFIG_COMEDI_ADDI_APCI_1032=m
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=m
CONFIG_COMEDI_ADDI_APCI_2032=m
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3120=m
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=m
# CONFIG_COMEDI_ADL_PCI7250 is not set
CONFIG_COMEDI_ADL_PCI7X3X=m
CONFIG_COMEDI_ADL_PCI8164=m
# CONFIG_COMEDI_ADL_PCI9111 is not set
# CONFIG_COMEDI_ADL_PCI9118 is not set
# CONFIG_COMEDI_ADV_PCI1710 is not set
CONFIG_COMEDI_ADV_PCI1720=m
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI1724=m
CONFIG_COMEDI_ADV_PCI1760=m
# CONFIG_COMEDI_ADV_PCI_DIO is not set
# CONFIG_COMEDI_AMPLC_DIO200_PCI is not set
CONFIG_COMEDI_AMPLC_PC236_PCI=m
CONFIG_COMEDI_AMPLC_PC263_PCI=m
# CONFIG_COMEDI_AMPLC_PCI224 is not set
# CONFIG_COMEDI_AMPLC_PCI230 is not set
CONFIG_COMEDI_CONTEC_PCI_DIO=m
# CONFIG_COMEDI_DAS08_PCI is not set
CONFIG_COMEDI_DT3000=m
CONFIG_COMEDI_DYNA_PCI10XX=m
CONFIG_COMEDI_GSC_HPDI=m
CONFIG_COMEDI_MF6X4=m
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_DAQBOARD2000=m
CONFIG_COMEDI_JR3_PCI=m
CONFIG_COMEDI_KE_COUNTER=m
CONFIG_COMEDI_CB_PCIDAS64=m
# CONFIG_COMEDI_CB_PCIDAS is not set
CONFIG_COMEDI_CB_PCIDDA=m
# CONFIG_COMEDI_CB_PCIMDAS is not set
CONFIG_COMEDI_CB_PCIMDDA=m
# CONFIG_COMEDI_ME4000 is not set
CONFIG_COMEDI_ME_DAQ=m
CONFIG_COMEDI_NI_6527=m
CONFIG_COMEDI_NI_65XX=m
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=m
# CONFIG_COMEDI_NI_LABPC_PCI is not set
CONFIG_COMEDI_NI_PCIDIO=m
CONFIG_COMEDI_NI_PCIMIO=m
# CONFIG_COMEDI_RTD520 is not set
CONFIG_COMEDI_S626=m
CONFIG_COMEDI_MITE=m
CONFIG_COMEDI_NI_TIOCMD=m
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_COMEDI_DT9812=m
CONFIG_COMEDI_NI_USB6501=m
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
CONFIG_COMEDI_USBDUXSIGMA=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_8255_SA=m
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_COMEDI_NI_ROUTING=m
# CONFIG_COMEDI_TESTS is not set
# CONFIG_GPIB is not set
CONFIG_STAGING=y
CONFIG_RTL8723BS=m
#
# IIO staging drivers
#
#
# Accelerometers
#
CONFIG_ADIS16203=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7816=m
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_SPI=m
CONFIG_ADT7316_I2C=m
# end of Analog digital bi-direction converters
#
# Direct Digital Synthesis
#
CONFIG_AD9832=m
CONFIG_AD9834=m
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
# end of Network Analyzer, Impedance Converters
# end of IIO staging drivers
CONFIG_FB_SM750=m
CONFIG_STAGING_MEDIA=y
CONFIG_INTEL_ATOMISP=y
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_SP8870=m
CONFIG_VIDEO_IPU3_IMGU=m
# CONFIG_VIDEO_INTEL_IPU7 is not set
# CONFIG_STAGING_MEDIA_DEPRECATED is not set
CONFIG_FB_TFT=m
CONFIG_FB_TFT_AGM1264K_FL=m
CONFIG_FB_TFT_BD663474=m
CONFIG_FB_TFT_HX8340BN=m
CONFIG_FB_TFT_HX8347D=m
CONFIG_FB_TFT_HX8353D=m
CONFIG_FB_TFT_HX8357D=m
CONFIG_FB_TFT_ILI9163=m
CONFIG_FB_TFT_ILI9320=m
CONFIG_FB_TFT_ILI9325=m
CONFIG_FB_TFT_ILI9340=m
CONFIG_FB_TFT_ILI9341=m
CONFIG_FB_TFT_ILI9481=m
CONFIG_FB_TFT_ILI9486=m
CONFIG_FB_TFT_PCD8544=m
CONFIG_FB_TFT_RA8875=m
CONFIG_FB_TFT_S6D02A1=m
CONFIG_FB_TFT_S6D1121=m
CONFIG_FB_TFT_SEPS525=m
CONFIG_FB_TFT_SH1106=m
CONFIG_FB_TFT_SSD1289=m
CONFIG_FB_TFT_SSD1305=m
CONFIG_FB_TFT_SSD1306=m
CONFIG_FB_TFT_SSD1331=m
CONFIG_FB_TFT_SSD1351=m
CONFIG_FB_TFT_ST7735R=m
CONFIG_FB_TFT_ST7789V=m
CONFIG_FB_TFT_TINYLCD=m
CONFIG_FB_TFT_TLS8204=m
CONFIG_FB_TFT_UC1611=m
CONFIG_FB_TFT_UC1701=m
CONFIG_FB_TFT_UPD161704=m
# CONFIG_MOST_COMPONENTS is not set
CONFIG_GREYBUS_AUDIO=m
CONFIG_GREYBUS_AUDIO_APB_CODEC=m
CONFIG_GREYBUS_BOOTROM=m
CONFIG_GREYBUS_FIRMWARE=m
CONFIG_GREYBUS_HID=m
CONFIG_GREYBUS_LIGHT=m
CONFIG_GREYBUS_LOG=m
CONFIG_GREYBUS_LOOPBACK=m
CONFIG_GREYBUS_POWER=m
CONFIG_GREYBUS_RAW=m
CONFIG_GREYBUS_VIBRATOR=m
CONFIG_GREYBUS_BRIDGED_PHY=m
CONFIG_GREYBUS_GPIO=m
CONFIG_GREYBUS_I2C=m
CONFIG_GREYBUS_PWM=m
CONFIG_GREYBUS_SDIO=m
CONFIG_GREYBUS_SPI=m
CONFIG_GREYBUS_UART=m
CONFIG_GREYBUS_USB=m
# CONFIG_VME_BUS is not set
# CONFIG_GOLDFISH is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_ACPI=m
CONFIG_CHROMEOS_LAPTOP=m
CONFIG_CHROMEOS_PSTORE=m
# CONFIG_CHROMEOS_TBMC is not set
CONFIG_CROS_EC=m
CONFIG_CROS_EC_I2C=m
# CONFIG_CROS_EC_ISHTP is not set
CONFIG_CROS_EC_SPI=m
CONFIG_CROS_EC_UART=m
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=m
CONFIG_CROS_KBD_LED_BACKLIGHT=m
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LIGHTBAR=m
CONFIG_CROS_EC_DEBUGFS=m
CONFIG_CROS_EC_SENSORHUB=m
CONFIG_CROS_EC_SYSFS=m
CONFIG_CROS_EC_TYPEC_ALTMODES=y
CONFIG_CROS_EC_TYPEC=m
CONFIG_CROS_HPS_I2C=m
CONFIG_CROS_USBPD_LOGGER=m
CONFIG_CROS_USBPD_NOTIFY=m
CONFIG_CHROMEOS_PRIVACY_SCREEN=m
CONFIG_CROS_TYPEC_SWITCH=m
# CONFIG_WILCO_EC is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_SURFACE3_WMI=m
CONFIG_SURFACE_3_POWER_OPREGION=m
CONFIG_SURFACE_ACPI_NOTIFY=m
CONFIG_SURFACE_AGGREGATOR_CDEV=m
CONFIG_SURFACE_AGGREGATOR_HUB=m
CONFIG_SURFACE_AGGREGATOR_REGISTRY=m
CONFIG_SURFACE_AGGREGATOR_TABLET_SWITCH=m
CONFIG_SURFACE_DTX=m
CONFIG_SURFACE_GPE=m
CONFIG_SURFACE_HOTPLUG=m
CONFIG_SURFACE_PLATFORM_PROFILE=m
CONFIG_SURFACE_PRO3_BUTTON=m
CONFIG_SURFACE_AGGREGATOR=m
CONFIG_SURFACE_AGGREGATOR_BUS=y
# CONFIG_SURFACE_AGGREGATOR_ERROR_INJECTION is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_WMI_BMOF=m
CONFIG_HUAWEI_WMI=m
# CONFIG_X86_PLATFORM_DRIVERS_UNIWILL is not set
CONFIG_MXM_WMI=m
CONFIG_NVIDIA_WMI_EC_BACKLIGHT=m
# CONFIG_XIAOMI_WMI is not set
# CONFIG_REDMI_WMI is not set
CONFIG_GIGABYTE_WMI=m
# CONFIG_BITLAND_MIFS_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACER_WMI=m
#
# AMD HSMP Driver
#
# CONFIG_AMD_HSMP_ACPI is not set
# CONFIG_AMD_HSMP_PLAT is not set
# end of AMD HSMP Driver
CONFIG_AMD_PMF=m
# CONFIG_AMD_PMF_DEBUG is not set
CONFIG_AMD_PMC=m
CONFIG_AMD_MP2_STB=y
# CONFIG_AMD_HFI is not set
# CONFIG_AMD_3D_VCACHE is not set
# CONFIG_AMD_WBRF is not set
# CONFIG_AMD_ISP_PLATFORM is not set
CONFIG_ADV_SWBUTTON=m
CONFIG_APPLE_GMUX=m
CONFIG_ASUS_LAPTOP=m
CONFIG_ASUS_WIRELESS=m
# CONFIG_ASUS_ARMOURY is not set
CONFIG_ASUS_WMI=m
CONFIG_ASUS_WMI_DEPRECATED_ATTRS=y
CONFIG_ASUS_NB_WMI=m
CONFIG_ASUS_TF103C_DOCK=m
# CONFIG_AYANEO_EC is not set
CONFIG_MERAKI_MX100=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
CONFIG_X86_PLATFORM_DRIVERS_DELL=y
CONFIG_ALIENWARE_WMI=m
CONFIG_ALIENWARE_WMI_LEGACY=y
CONFIG_ALIENWARE_WMI_WMAX=y
CONFIG_DCDBAS=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_RBU=m
CONFIG_DELL_RBTN=m
CONFIG_DELL_PC=m
CONFIG_DELL_SMBIOS=m
CONFIG_DELL_SMBIOS_WMI=y
CONFIG_DELL_SMBIOS_SMM=y
CONFIG_DELL_SMO8800=m
# CONFIG_DELL_UART_BACKLIGHT is not set
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_PRIVACY=y
CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_WMI_DESCRIPTOR=m
CONFIG_DELL_WMI_DDV=m
CONFIG_DELL_WMI_LED=m
# CONFIG_DELL_WMI_SYSMAN is not set
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
CONFIG_GPD_POCKET_FAN=m
CONFIG_X86_PLATFORM_DRIVERS_HP=y
CONFIG_HP_ACCEL=m
CONFIG_HP_WMI=m
CONFIG_HP_BIOSCFG=m
CONFIG_WIRELESS_HOTKEY=m
CONFIG_IBM_RTL=m
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_ATOMISP2_PDX86=y
CONFIG_INTEL_ATOMISP2_LED=m
CONFIG_INTEL_IFS=m
CONFIG_INTEL_SAR_INT1092=m
CONFIG_INTEL_SKL_INT3472=m
CONFIG_INTEL_PMC_CORE=m
CONFIG_INTEL_PMC_SSRAM_TELEMETRY=m
CONFIG_INTEL_PMT_CLASS=m
CONFIG_INTEL_PMT_TELEMETRY=m
CONFIG_INTEL_PMT_CRASHLOG=m
CONFIG_INTEL_PMT_DISCOVERY=m
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
CONFIG_INTEL_TELEMETRY=m
CONFIG_INTEL_WMI=y
CONFIG_INTEL_WMI_SBL_FW_UPDATE=m
CONFIG_INTEL_WMI_THUNDERBOLT=m
#
# Intel Uncore Frequency Control
#
CONFIG_INTEL_UNCORE_FREQ_CONTROL_TPMI=m
CONFIG_INTEL_UNCORE_FREQ_CONTROL=m
# end of Intel Uncore Frequency Control
CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
# CONFIG_INTEL_EHL_PSE_IO is not set
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_OAKTRAIL=m
CONFIG_INTEL_ISHTP_ECLITE=m
CONFIG_INTEL_MRFLD_PWRBTN=m
CONFIG_INTEL_PUNIT_IPC=m
CONFIG_INTEL_RST=m
CONFIG_INTEL_SDSI=m
CONFIG_INTEL_SMARTCONNECT=m
CONFIG_INTEL_TPMI_POWER_DOMAINS=m
CONFIG_INTEL_TPMI=m
# CONFIG_INTEL_PLR_TPMI is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
CONFIG_INTEL_VSEC=m
CONFIG_IDEAPAD_LAPTOP=m
# CONFIG_LENOVO_WMI_HOTKEY_UTILITIES is not set
# CONFIG_LENOVO_WMI_CAMERA is not set
CONFIG_LENOVO_YMC=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_THINKPAD_LMI=m
# CONFIG_YOGABOOK is not set
# CONFIG_YT2_1380 is not set
# CONFIG_LENOVO_WMI_GAMEZONE is not set
# CONFIG_LENOVO_WMI_TUNING is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_MEEGOPAD_ANX7428 is not set
CONFIG_MSI_EC=m
CONFIG_MSI_LAPTOP=m
CONFIG_MSI_WMI=m
# CONFIG_MSI_WMI_PLATFORM is not set
CONFIG_PCENGINES_APU2=m
# CONFIG_PORTWELL_EC is not set
CONFIG_BARCO_P50_GPIO=m
# CONFIG_SAMSUNG_GALAXYBOOK is not set
CONFIG_SAMSUNG_LAPTOP=m
# CONFIG_SAMSUNG_Q10 is not set
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_TOSHIBA_HAPS=m
CONFIG_TOSHIBA_WMI=m
# CONFIG_ACPI_CMPC is not set
CONFIG_COMPAL_LAPTOP=m
CONFIG_LG_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_SYSTEM76_ACPI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_SERIAL_MULTI_INSTANTIATE=m
CONFIG_TOUCHSCREEN_DMI=y
# CONFIG_INSPUR_PLATFORM_PROFILE is not set
# CONFIG_DASHARO_ACPI is not set
# CONFIG_X86_ANDROID_TABLETS is not set
CONFIG_FW_ATTR_CLASS=m
CONFIG_INTEL_IPS=m
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
CONFIG_INTEL_SCU_PLATFORM=m
CONFIG_INTEL_SCU_IPC_UTIL=m
CONFIG_SIEMENS_SIMATIC_IPC=m
CONFIG_SIEMENS_SIMATIC_IPC_BATT=m
CONFIG_SIEMENS_SIMATIC_IPC_BATT_APOLLOLAKE=m
CONFIG_SIEMENS_SIMATIC_IPC_BATT_ELKHARTLAKE=m
CONFIG_SIEMENS_SIMATIC_IPC_BATT_F7188X=m
# CONFIG_SILICOM_PLATFORM is not set
# CONFIG_WINMATE_FM07_KEYS is not set
# CONFIG_SEL3350_PLATFORM is not set
# CONFIG_OXP_EC is not set
# CONFIG_TUXEDO_NB04_WMI_AB is not set
CONFIG_P2SB=y
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_WMI_LEGACY_DEVICE_NAMES is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=m
CONFIG_LMK04832=m
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
CONFIG_COMMON_CLK_SI5351=m
CONFIG_COMMON_CLK_SI544=m
CONFIG_COMMON_CLK_CDCE706=m
CONFIG_COMMON_CLK_TPS68470=m
CONFIG_COMMON_CLK_CS2000_CP=m
CONFIG_COMMON_CLK_PWM=m
# CONFIG_XILINX_VCU is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=m
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMUFD_DRIVER=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_IOMMU_SVA=y
CONFIG_IOMMU_IOPF=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_IOMMUFD is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_PERF_EVENTS=y
CONFIG_IOMMUFD_DRIVER_CORE=y
CONFIG_IOMMUFD=m
CONFIG_IRQ_REMAP=y
CONFIG_HYPERV_IOMMU=y
CONFIG_VIRTIO_IOMMU=m
CONFIG_GENERIC_PT=y
# CONFIG_DEBUG_GENERIC_PT is not set
CONFIG_IOMMU_PT=y
CONFIG_IOMMU_PT_AMDV1=y
CONFIG_IOMMU_PT_VTDSS=y
# CONFIG_IOMMU_PT_RISCV64 is not set
CONFIG_IOMMU_PT_X86_64=y
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CHAR=m
CONFIG_RPMSG_CTRL=m
CONFIG_RPMSG_NS=m
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=m
#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_AMD=m
CONFIG_SOUNDWIRE_CADENCE=m
CONFIG_SOUNDWIRE_INTEL=m
CONFIG_SOUNDWIRE_QCOM=m
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=m
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers
# CONFIG_WPCM450_SOC is not set
#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_PMIC_PDCHARGER_ULOG is not set
CONFIG_QCOM_QMI_HELPERS=m
# CONFIG_QCOM_PBS is not set
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
#
# PM Domains
#
#
# Amlogic PM Domains
#
# end of Amlogic PM Domains
#
# Broadcom PM Domains
#
# end of Broadcom PM Domains
#
# i.MX PM Domains
#
# end of i.MX PM Domains
#
# Qualcomm PM Domains
#
# end of Qualcomm PM Domains
# end of PM Domains
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=m
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_AXP288=m
# CONFIG_EXTCON_FSA9480 is not set
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_INTEL_INT3496=m
CONFIG_EXTCON_INTEL_MRFLD=m
# CONFIG_EXTCON_LC824206XA is not set
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77843=m
# CONFIG_EXTCON_MAX14526 is not set
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_RT8973A=m
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_USBC_CROS_EC=m
# CONFIG_EXTCON_USBC_TUSB320 is not set
CONFIG_MEMORY=y
# CONFIG_FPGA_DFL_EMIF is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_DMA=m
CONFIG_IIO_BUFFER_DMAENGINE=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_GTS_HELPER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=m
CONFIG_IIO_BACKEND=m
#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16209=m
CONFIG_ADXL313=m
CONFIG_ADXL313_I2C=m
CONFIG_ADXL313_SPI=m
# CONFIG_ADXL345_I2C is not set
# CONFIG_ADXL345_SPI is not set
CONFIG_ADXL355=m
CONFIG_ADXL355_I2C=m
CONFIG_ADXL355_SPI=m
CONFIG_ADXL367=m
CONFIG_ADXL367_SPI=m
CONFIG_ADXL367_I2C=m
CONFIG_ADXL372=m
CONFIG_ADXL372_SPI=m
CONFIG_ADXL372_I2C=m
# CONFIG_ADXL380_SPI is not set
# CONFIG_ADXL380_I2C is not set
CONFIG_BMA220=m
CONFIG_BMA220_I2C=m
CONFIG_BMA220_SPI=m
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMA400_SPI=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
CONFIG_BMI088_ACCEL=m
CONFIG_BMI088_ACCEL_I2C=m
CONFIG_BMI088_ACCEL_SPI=m
CONFIG_DA280=m
CONFIG_DA311=m
# CONFIG_DMARD06 is not set
CONFIG_DMARD09=m
CONFIG_DMARD10=m
CONFIG_FXLS8962AF=m
CONFIG_FXLS8962AF_I2C=m
CONFIG_FXLS8962AF_SPI=m
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
CONFIG_IIO_KX022A=m
CONFIG_IIO_KX022A_SPI=m
CONFIG_IIO_KX022A_I2C=m
CONFIG_KXSD9=m
CONFIG_KXSD9_SPI=m
CONFIG_KXSD9_I2C=m
CONFIG_KXCJK1013=m
# CONFIG_MC3230 is not set
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=m
CONFIG_MMA7660=m
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MSA311=m
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_SCA3000=m
CONFIG_SCA3300=m
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
# CONFIG_AD4000 is not set
# CONFIG_AD4030 is not set
# CONFIG_AD4062 is not set
# CONFIG_AD4080 is not set
CONFIG_AD4130=m
# CONFIG_AD4134 is not set
# CONFIG_AD4170_4 is not set
# CONFIG_AD4695 is not set
# CONFIG_AD4851 is not set
CONFIG_AD7091R=m
CONFIG_AD7091R5=m
# CONFIG_AD7091R8 is not set
CONFIG_AD7124=m
# CONFIG_AD7173 is not set
# CONFIG_AD7191 is not set
CONFIG_AD7192=m
CONFIG_AD7266=m
CONFIG_AD7280=m
CONFIG_AD7291=m
CONFIG_AD7292=m
CONFIG_AD7298=m
# CONFIG_AD7380 is not set
# CONFIG_AD7405 is not set
CONFIG_AD7476=m
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AD7606_IFACE_SPI=m
# CONFIG_AD7625 is not set
CONFIG_AD7766=m
CONFIG_AD7768_1=m
# CONFIG_AD7779 is not set
CONFIG_AD7780=m
CONFIG_AD7791=m
CONFIG_AD7793=m
CONFIG_AD7887=m
CONFIG_AD7923=m
# CONFIG_AD7944 is not set
CONFIG_AD7949=m
CONFIG_AD799X=m
# CONFIG_AD9467 is not set
# CONFIG_ADE9000 is not set
# CONFIG_AXP20X_ADC is not set
CONFIG_AXP288_ADC=m
CONFIG_CC10001_ADC=m
CONFIG_DA9150_GPADC=m
CONFIG_DLN2_ADC=m
# CONFIG_ENVELOPE_DETECTOR is not set
# CONFIG_GEHC_PMC_ADC is not set
CONFIG_HI8435=m
CONFIG_HX711=m
CONFIG_INA2XX_ADC=m
CONFIG_INTEL_MRFLD_ADC=m
# CONFIG_LTC2309 is not set
CONFIG_LTC2471=m
CONFIG_LTC2485=m
CONFIG_LTC2496=m
# CONFIG_LTC2497 is not set
# CONFIG_MAX1027 is not set
CONFIG_MAX11100=m
# CONFIG_MAX1118 is not set
# CONFIG_MAX11205 is not set
CONFIG_MAX11410=m
CONFIG_MAX1241=m
CONFIG_MAX1363=m
# CONFIG_MAX14001 is not set
# CONFIG_MAX34408 is not set
# CONFIG_MAX9611 is not set
CONFIG_MCP320X=m
CONFIG_MCP3422=m
# CONFIG_MCP3564 is not set
CONFIG_MCP3911=m
# CONFIG_MEDIATEK_MT6359_AUXADC is not set
# CONFIG_MEDIATEK_MT6360_ADC is not set
CONFIG_MEN_Z188_ADC=m
CONFIG_MP2629_ADC=m
CONFIG_NAU7802=m
# CONFIG_NCT7201 is not set
# CONFIG_PAC1921 is not set
# CONFIG_PAC1934 is not set
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_SPMI_IADC=m
CONFIG_QCOM_SPMI_VADC=m
CONFIG_QCOM_SPMI_ADC5=m
# CONFIG_QCOM_SPMI_ADC5_GEN3 is not set
# CONFIG_ROHM_BD79112 is not set
# CONFIG_ROHM_BD79124 is not set
CONFIG_RICHTEK_RTQ6056=m
# CONFIG_SD_ADC_MODULATOR is not set
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC0832=m
# CONFIG_TI_ADC084S021 is not set
# CONFIG_TI_ADC108S102 is not set
CONFIG_TI_ADC12138=m
CONFIG_TI_ADC128S052=m
CONFIG_TI_ADC161S626=m
CONFIG_TI_ADS1015=m
# CONFIG_TI_ADS1018 is not set
CONFIG_TI_ADS1100=m
# CONFIG_TI_ADS1119 is not set
CONFIG_TI_ADS124S08=m
# CONFIG_TI_ADS1298 is not set
CONFIG_TI_ADS131E08=m
# CONFIG_TI_ADS131M02 is not set
# CONFIG_TI_ADS7138 is not set
# CONFIG_TI_ADS7924 is not set
CONFIG_TI_ADS7950=m
CONFIG_TI_ADS8344=m
CONFIG_TI_ADS8688=m
# CONFIG_TI_LMP92064 is not set
CONFIG_TI_TLC4541=m
CONFIG_TI_TSC2046=m
# CONFIG_VF610_ADC is not set
CONFIG_VIPERBOARD_ADC=m
# CONFIG_XILINX_XADC is not set
# end of Analog to digital converters
#
# Analog to digital and digital to analog converters
#
CONFIG_AD74115=m
CONFIG_AD74413R=m
# end of Analog to digital and digital to analog converters
#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_AD8366=m
CONFIG_ADA4250=m
# CONFIG_ADL8113 is not set
# CONFIG_HMC425 is not set
# end of Amplifiers
#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7746=m
# end of Capacitance to digital converters
#
# Chemical Sensors
#
# CONFIG_AOSONG_AGS02MA is not set
CONFIG_ATLAS_PH_SENSOR=m
CONFIG_ATLAS_EZO_SENSOR=m
CONFIG_BME680=m
CONFIG_BME680_I2C=m
CONFIG_BME680_SPI=m
CONFIG_CCS811=m
# CONFIG_ENS160 is not set
CONFIG_IAQCORE=m
# CONFIG_MHZ19B is not set
CONFIG_PMS7003=m
CONFIG_SCD30_CORE=m
CONFIG_SCD30_I2C=m
CONFIG_SCD30_SERIAL=m
CONFIG_SCD4X=m
# CONFIG_SEN0322 is not set
CONFIG_SENSIRION_SGP30=m
CONFIG_SENSIRION_SGP40=m
CONFIG_SPS30=m
CONFIG_SPS30_I2C=m
CONFIG_SPS30_SERIAL=m
CONFIG_SENSEAIR_SUNRISE_CO2=m
CONFIG_VZ89X=m
# end of Chemical Sensors
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
# CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE is not set
# CONFIG_IIO_CROS_EC_ACTIVITY is not set
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common
CONFIG_IIO_INV_SENSORS_TIMESTAMP=m
CONFIG_IIO_MS_SENSORS_I2C=m
#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=m
CONFIG_IIO_SSP_SENSORHUB=m
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m
#
# Digital to analog converters
#
# CONFIG_AD3530R is not set
# CONFIG_AD3552R_HS is not set
CONFIG_AD3552R_LIB=m
CONFIG_AD3552R=m
CONFIG_AD5064=m
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
# CONFIG_AD5446_SPI is not set
# CONFIG_AD5446_I2C is not set
CONFIG_AD5449=m
CONFIG_AD5592R_BASE=m
CONFIG_AD5592R=m
CONFIG_AD5593R=m
CONFIG_AD5504=m
CONFIG_AD5624R_SPI=m
# CONFIG_AD9739A is not set
CONFIG_LTC2688=m
# CONFIG_AD5686_SPI is not set
# CONFIG_AD5696_I2C is not set
CONFIG_AD5755=m
# CONFIG_AD5758 is not set
CONFIG_AD5761=m
CONFIG_AD5764=m
CONFIG_AD5766=m
# CONFIG_AD5770R is not set
CONFIG_AD5791=m
CONFIG_AD7293=m
CONFIG_AD7303=m
# CONFIG_AD8460 is not set
CONFIG_AD8801=m
# CONFIG_BD79703 is not set
# CONFIG_DPOT_DAC is not set
CONFIG_DS4424=m
CONFIG_LTC1660=m
# CONFIG_LTC2632 is not set
# CONFIG_LTC2664 is not set
CONFIG_M62332=m
CONFIG_MAX517=m
# CONFIG_MAX22007 is not set
# CONFIG_MAX5522 is not set
CONFIG_MAX5821=m
CONFIG_MCP4725=m
# CONFIG_MCP4728 is not set
# CONFIG_MCP47FEB02 is not set
# CONFIG_MCP4821 is not set
# CONFIG_MCP4922 is not set
CONFIG_TI_DAC082S085=m
# CONFIG_TI_DAC5571 is not set
CONFIG_TI_DAC7311=m
CONFIG_TI_DAC7612=m
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters
#
# IIO dummy driver
#
CONFIG_IIO_SIMPLE_DUMMY=m
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
# end of IIO dummy driver
#
# Filters
#
CONFIG_ADMV8818=m
# end of Filters
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=m
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m
# CONFIG_ADF4371 is not set
CONFIG_ADF4377=m
# CONFIG_ADMFM2000 is not set
CONFIG_ADMV1013=m
CONFIG_ADMV1014=m
CONFIG_ADMV4420=m
CONFIG_ADRF6780=m
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16136=m
CONFIG_ADIS16260=m
CONFIG_ADXRS290=m
CONFIG_ADXRS450=m
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
CONFIG_ITG3200=m
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=m
CONFIG_AFE4404=m
CONFIG_MAX30100=m
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
CONFIG_AM2315=m
CONFIG_DHT11=m
# CONFIG_ENS210 is not set
CONFIG_HDC100X=m
CONFIG_HDC2010=m
# CONFIG_HDC3020 is not set
# CONFIG_HID_SENSOR_HUMIDITY is not set
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
CONFIG_HTS221_SPI=m
CONFIG_HTU21=m
CONFIG_SI7005=m
CONFIG_SI7020=m
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_ADIS16400=m
# CONFIG_ADIS16460 is not set
# CONFIG_ADIS16475 is not set
CONFIG_ADIS16480=m
# CONFIG_ADIS16550 is not set
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=m
# CONFIG_BMI270_I2C is not set
# CONFIG_BMI270_SPI is not set
# CONFIG_BMI323_I2C is not set
# CONFIG_BMI323_SPI is not set
CONFIG_BOSCH_BNO055=m
CONFIG_BOSCH_BNO055_SERIAL=m
CONFIG_BOSCH_BNO055_I2C=m
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
CONFIG_FXOS8700_SPI=m
CONFIG_KMX61=m
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
CONFIG_INV_ICM42600_SPI=m
# CONFIG_INV_ICM45600_I2C is not set
# CONFIG_INV_ICM45600_SPI is not set
# CONFIG_INV_ICM45600_I3C is not set
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_INV_MPU6050_SPI=m
# CONFIG_SMI240 is not set
# CONFIG_SMI330_I2C is not set
# CONFIG_SMI330_SPI is not set
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
CONFIG_IIO_ST_LSM6DSX_I3C=m
CONFIG_IIO_ST_LSM9DS0=m
CONFIG_IIO_ST_LSM9DS0_I2C=m
CONFIG_IIO_ST_LSM9DS0_SPI=m
# end of Inertial measurement units
CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=m
CONFIG_ADJD_S311=m
CONFIG_ADUX1020=m
# CONFIG_AL3000A is not set
# CONFIG_AL3010 is not set
CONFIG_AL3320A=m
# CONFIG_APDS9160 is not set
CONFIG_APDS9300=m
# CONFIG_APDS9306 is not set
CONFIG_APDS9960=m
CONFIG_AS73211=m
# CONFIG_BH1745 is not set
CONFIG_BH1750=m
CONFIG_BH1780=m
CONFIG_CM32181=m
CONFIG_CM3232=m
CONFIG_CM3323=m
# CONFIG_CM3605 is not set
CONFIG_CM36651=m
# CONFIG_IIO_CROS_EC_LIGHT_PROX is not set
# CONFIG_GP2AP002 is not set
CONFIG_GP2AP020A00F=m
# CONFIG_IQS621_ALS is not set
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
# CONFIG_ISL29125 is not set
# CONFIG_ISL76682 is not set
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
CONFIG_ROHM_BU27034=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
# CONFIG_LTR390 is not set
CONFIG_LTR501=m
CONFIG_LTRF216A=m
CONFIG_LV0104CS=m
CONFIG_MAX44000=m
CONFIG_MAX44009=m
CONFIG_NOA1305=m
CONFIG_OPT3001=m
# CONFIG_OPT4001 is not set
# CONFIG_OPT4060 is not set
CONFIG_PA12203001=m
# CONFIG_SI1133 is not set
CONFIG_SI1145=m
CONFIG_STK3310=m
# CONFIG_ST_UVIS25 is not set
# CONFIG_TCS3414 is not set
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
CONFIG_TSL2591=m
# CONFIG_TSL2772 is not set
CONFIG_TSL4531=m
CONFIG_US5182D=m
CONFIG_VCNL4000=m
CONFIG_VCNL4035=m
# CONFIG_VEML3235 is not set
CONFIG_VEML6030=m
# CONFIG_VEML6040 is not set
# CONFIG_VEML6046X00 is not set
CONFIG_VEML6070=m
# CONFIG_VEML6075 is not set
# CONFIG_VL6180 is not set
# CONFIG_ZOPT2201 is not set
# end of Light sensors
#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=m
# CONFIG_AK09911 is not set
# CONFIG_ALS31300 is not set
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_BMC150_MAGN_SPI=m
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
CONFIG_MMC35240=m
# CONFIG_MMC5633 is not set
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
# CONFIG_INFINEON_TLV493D is not set
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_HMC5843_SPI is not set
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
CONFIG_SENSORS_RM3100_SPI=m
# CONFIG_SI7210 is not set
# CONFIG_TI_TMAG5273 is not set
CONFIG_YAMAHA_YAS530=m
# end of Magnetometer sensors
#
# Multiplexers
#
# CONFIG_IIO_MUX is not set
# end of Multiplexers
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
# end of Inclinometer sensors
#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone
#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=m
CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=m
# end of Linear and angular position sensors
#
# Digital potentiometers
#
CONFIG_AD5110=m
CONFIG_AD5272=m
CONFIG_DS1803=m
CONFIG_MAX5432=m
CONFIG_MAX5481=m
CONFIG_MAX5487=m
CONFIG_MCP4018=m
CONFIG_MCP4131=m
CONFIG_MCP4531=m
CONFIG_MCP41010=m
CONFIG_TPL0102=m
# CONFIG_X9250 is not set
# end of Digital potentiometers
#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats
#
# Pressure sensors
#
CONFIG_ABP060MG=m
# CONFIG_ABP2030PA_I2C is not set
# CONFIG_ABP2030PA_SPI is not set
# CONFIG_ROHM_BM1390 is not set
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_IIO_CROS_EC_BARO=m
CONFIG_DLHL60D=m
# CONFIG_DPS310 is not set
CONFIG_HID_SENSOR_PRESS=m
CONFIG_HP03=m
# CONFIG_HSC030PA is not set
# CONFIG_ICP10100 is not set
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
CONFIG_MPL115_SPI=m
CONFIG_MPL3115=m
# CONFIG_MPRLS0025PA_I2C is not set
# CONFIG_MPRLS0025PA_SPI is not set
CONFIG_MS5611=m
CONFIG_MS5611_I2C=m
CONFIG_MS5611_SPI=m
CONFIG_MS5637=m
# CONFIG_SDP500 is not set
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS_SPI=m
# CONFIG_T5403 is not set
CONFIG_HP206C=m
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
CONFIG_ZPA2326_SPI=m
# CONFIG_ADP810 is not set
# end of Pressure sensors
#
# Lightning sensors
#
# CONFIG_AS3935 is not set
# end of Lightning sensors
#
# Proximity and distance sensors
#
CONFIG_CROS_EC_MKBP_PROXIMITY=m
# CONFIG_D3323AA is not set
# CONFIG_HX9023S is not set
# CONFIG_IRSD200 is not set
CONFIG_ISL29501=m
CONFIG_LIDAR_LITE_V2=m
CONFIG_MB1232=m
CONFIG_PING=m
CONFIG_RFD77402=m
# CONFIG_SRF04 is not set
CONFIG_SX_COMMON=m
# CONFIG_SX9310 is not set
CONFIG_SX9324=m
CONFIG_SX9360=m
CONFIG_SX9500=m
CONFIG_SRF08=m
CONFIG_VCNL3020=m
CONFIG_VL53L0X_I2C=m
# CONFIG_VL53L1X_I2C is not set
# CONFIG_AW96103 is not set
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
CONFIG_AD2S90=m
CONFIG_AD2S1200=m
CONFIG_AD2S1210=m
# end of Resolver to digital converters
#
# Temperature sensors
#
# CONFIG_IQS620AT_TEMP is not set
CONFIG_LTC2983=m
CONFIG_MAXIM_THERMOCOUPLE=m
# CONFIG_HID_SENSOR_TEMP is not set
# CONFIG_MLX90614 is not set
# CONFIG_MLX90632 is not set
# CONFIG_MLX90635 is not set
CONFIG_TMP006=m
CONFIG_TMP007=m
CONFIG_TMP117=m
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
CONFIG_MAX30208=m
CONFIG_MAX31856=m
CONFIG_MAX31865=m
# CONFIG_MCP9600 is not set
# end of Temperature sensors
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
CONFIG_NTB_AMD=m
# CONFIG_NTB_IDT is not set
CONFIG_NTB_INTEL=m
# CONFIG_NTB_EPF is not set
CONFIG_NTB_SWITCHTEC=m
CONFIG_NTB_PINGPONG=m
CONFIG_NTB_TOOL=m
CONFIG_NTB_PERF=m
CONFIG_NTB_TRANSPORT=m
CONFIG_PWM=y
# CONFIG_PWM_PROVIDE_GPIO is not set
# CONFIG_PWM_CLK is not set
CONFIG_PWM_CROS_EC=m
# CONFIG_PWM_DWC is not set
# CONFIG_PWM_GPIO is not set
CONFIG_PWM_IQS620A=m
CONFIG_PWM_LP3943=m
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
CONFIG_PWM_PCA9685=m
#
# IRQ chip support
#
CONFIG_IRQ_MSI_LIB=y
CONFIG_MADERA_IRQ=m
# end of IRQ chip support
CONFIG_IPACK_BUS=m
CONFIG_BOARD_TPCI200=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_GPIO is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_TI_TPS380X is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_CAN_TRANSCEIVER=m
# CONFIG_PHY_GOOGLE_USB is not set
CONFIG_USB_LGM_PHY=m
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_INTEL_LGM_EMMC=m
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=m
# CONFIG_PHY_CPCAP_USB is not set
CONFIG_PHY_QCOM_USB_HS=m
CONFIG_PHY_QCOM_USB_HSIC=m
CONFIG_PHY_TUSB1210=m
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
# CONFIG_INTEL_RAPL_TPMI is not set
CONFIG_IDLE_INJECT=y
CONFIG_MCB=m
CONFIG_MCB_PCI=m
CONFIG_MCB_LPC=m
#
# Performance monitor support
#
# CONFIG_DWC_PCIE_PMU is not set
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
CONFIG_AMD_ATL=m
CONFIG_AMD_ATL_PRM=y
CONFIG_RAS_FMPM=m
CONFIG_USB4=m
# CONFIG_USB4_DEBUGFS_WRITE is not set
# CONFIG_USB4_DMA_TEST is not set
#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES=""
# end of Android
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_RAMDAX=m
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_HMEM=m
CONFIG_DEV_DAX_HMEM_DEVICES=y
CONFIG_DEV_DAX_FSDEV=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_LAYOUTS is not set
CONFIG_NVMEM_RMEM=m
CONFIG_NVMEM_SPMI_SDAM=m
#
# HW tracing support
#
CONFIG_STM=m
CONFIG_STM_PROTO_BASIC=m
CONFIG_STM_PROTO_SYS_T=m
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
CONFIG_FPGA=m
# CONFIG_ALTERA_PR_IP_CORE is not set
CONFIG_FPGA_MGR_ALTERA_PS_SPI=m
CONFIG_FPGA_MGR_ALTERA_CVP=m
# CONFIG_FPGA_MGR_XILINX_SELECTMAP is not set
# CONFIG_FPGA_MGR_XILINX_SPI is not set
# CONFIG_FPGA_MGR_MACHXO2_SPI is not set
CONFIG_FPGA_BRIDGE=m
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=m
CONFIG_FPGA_REGION=m
CONFIG_FPGA_DFL=m
CONFIG_FPGA_DFL_FME=m
CONFIG_FPGA_DFL_FME_MGR=m
CONFIG_FPGA_DFL_FME_BRIDGE=m
CONFIG_FPGA_DFL_FME_REGION=m
CONFIG_FPGA_DFL_AFU=m
CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000=m
CONFIG_FPGA_DFL_PCI=m
# CONFIG_FPGA_M10_BMC_SEC_UPDATE is not set
# CONFIG_FPGA_MGR_MICROCHIP_SPI is not set
CONFIG_FPGA_MGR_LATTICE_SYSCONFIG=m
CONFIG_FPGA_MGR_LATTICE_SYSCONFIG_SPI=m
CONFIG_TEE=m
CONFIG_AMDTEE=m
CONFIG_MULTIPLEXER=y
# CONFIG_MUX_CORE is not set
#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
# CONFIG_MUX_ADGS1408 is not set
# CONFIG_MUX_GPIO is not set
# end of Multiplexer drivers
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
CONFIG_INTERCONNECT=y
# CONFIG_COUNTER is not set
CONFIG_MOST=m
CONFIG_MOST_USB_HDM=m
CONFIG_MOST_CDEV=m
CONFIG_MOST_SND=m
CONFIG_PECI=m
CONFIG_PECI_CPU=m
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_FS_STACK=y
CONFIG_BUFFER_HEAD=y
CONFIG_LEGACY_DIRECT_IO=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_SUPPORT_ASCII_CI=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_EXPERIMENTAL is not set
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_LZ4HC=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_IOSTAT=y
CONFIG_F2FS_UNFAIR_RWSEM=y
CONFIG_ZONEFS_FS=m
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=m
CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
CONFIG_FUSE_DAX=y
CONFIG_FUSE_PASSTHROUGH=y
CONFIG_FUSE_IO_URING=y
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
CONFIG_OVERLAY_FS_XINO_AUTO=y
# CONFIG_OVERLAY_FS_METACOPY is not set
# CONFIG_OVERLAY_FS_DEBUG is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=m
# CONFIG_NETFS_STATS is not set
# CONFIG_NETFS_DEBUG is not set
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_FS_POSIX_ACL is not set
CONFIG_NTFS3_FS=m
# CONFIG_NTFS3_64BIT_CLUSTER is not set
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_INODE64=y
# CONFIG_TMPFS_QUOTA is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
# CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PMD_PAGE_TABLE_SHARING=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=m
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
CONFIG_SQUASHFS_DECOMP_MULTI=y
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT=y
CONFIG_SQUASHFS_MOUNT_DECOMP_THREADS=y
CONFIG_SQUASHFS_XATTR=y
# CONFIG_SQUASHFS_COMP_CACHE_FULL is not set
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_RESCTRL_FS=y
CONFIG_RESCTRL_FS_PSEUDO_LOCK=y
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_COMPRESS=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
CONFIG_PSTORE_ZONE=m
CONFIG_PSTORE_BLK=m
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EROFS_FS=m
# CONFIG_EROFS_FS_DEBUG is not set
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
CONFIG_EROFS_FS_SECURITY=y
CONFIG_EROFS_FS_BACKED_BY_FILE=y
CONFIG_EROFS_FS_ZIP=y
CONFIG_EROFS_FS_ZIP_LZMA=y
# CONFIG_EROFS_FS_ZIP_DEFLATE is not set
# CONFIG_EROFS_FS_ZIP_ZSTD is not set
# CONFIG_EROFS_FS_ZIP_ACCEL is not set
# CONFIG_EROFS_FS_ONDEMAND is not set
# CONFIG_EROFS_FS_PCPU_KTHREAD is not set
# CONFIG_EROFS_FS_PAGE_CACHE_SHARE is not set
CONFIG_VBOXSF_FS=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_0=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V2 is not set
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_2_INTER_SSC=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_LEGACY_CLIENT_TRACKING is not set
# CONFIG_NFSD_V4_POSIX_ACLS is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
# CONFIG_NFS_LOCALIO is not set
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1=y
# CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA is not set
CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2=y
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
# CONFIG_CIFS_SMB_DIRECT is not set
CONFIG_CIFS_FSCACHE=y
# CONFIG_CIFS_COMPRESSION is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS=m
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
# CONFIG_AFS_DEBUG_CURSOR is not set
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_NLS_UCS2_UTILS=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
CONFIG_UNICODE=y
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
CONFIG_TRUSTED_KEYS=m
CONFIG_HAVE_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_TRUSTED_KEYS_TEE=y
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_PROC_MEM_ALWAYS_FORCE=y
# CONFIG_PROC_MEM_FORCE_PTRACE is not set
# CONFIG_PROC_MEM_NO_FORCE is not set
CONFIG_SECURITY=y
CONFIG_HAS_SECURITY_AUDIT=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_INFINIBAND is not set
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y
CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
CONFIG_SECURITY_LANDLOCK=y
# CONFIG_SECURITY_IPE is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
# CONFIG_EVM is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,yama,loadpin,safesetid,integrity"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
#
# Bounds checking
#
CONFIG_FORTIFY_SOURCE=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_DEFAULT_ON=y
# end of Bounds checking
#
# Hardening of kernel data structures
#
CONFIG_LIST_HARDENED=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Hardening of kernel data structures
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_SIG=y
CONFIG_CRYPTO_SIG2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_ACOMP=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_KRB5ENC=m
# CONFIG_CRYPTO_BENCHMARK is not set
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_ECDSA=m
CONFIG_CRYPTO_ECRDSA=m
# CONFIG_CRYPTO_MLDSA is not set
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARIA=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SM4=m
CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HCTR2=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XCTR=m
CONFIG_CRYPTO_XTS=y
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_GENIV=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_STREEBOG=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_XXHASH=m
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32=m
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
CONFIG_CRYPTO_JITTERENTROPY_OSR=1
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# end of Userspace interface
#
# Accelerated Cryptographic Algorithms for CPU (x86)
#
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64=m
# CONFIG_CRYPTO_ARIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_ARIA_GFNI_AVX512_X86_64 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# end of Accelerated Cryptographic Algorithms for CPU (x86)
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
CONFIG_CRYPTO_DEV_QAT=m
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_420XX is not set
# CONFIG_CRYPTO_DEV_QAT_6XXX is not set
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
# CONFIG_CRYPTO_DEV_QAT_ERROR_INJECTION is not set
# CONFIG_CRYPTO_DEV_IAA_CRYPTO is not set
CONFIG_CRYPTO_DEV_CHELSIO=m
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
# CONFIG_MODULE_SIG_KEY_TYPE_MLDSA_44 is not set
# CONFIG_MODULE_SIG_KEY_TYPE_MLDSA_65 is not set
# CONFIG_MODULE_SIG_KEY_TYPE_MLDSA_87 is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_OPENSSL_SUPPORTS_ML_DSA=y
# end of Certificates for signature checking
CONFIG_CRYPTO_KRB5=m
# CONFIG_CRYPTO_KRB5_SELFTESTS is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
CONFIG_POLYNOMIAL=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_CRC7=m
CONFIG_CRC8=m
CONFIG_CRC16=m
CONFIG_CRC_CCITT=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_T10DIF_ARCH=y
CONFIG_CRC32=y
CONFIG_CRC32_ARCH=y
CONFIG_CRC64=y
CONFIG_CRC64_ARCH=y
CONFIG_CRC_OPTIMIZATIONS=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_AES_ARCH=y
CONFIG_CRYPTO_LIB_AESCFB=m
CONFIG_CRYPTO_LIB_AES_CBC_MACS=m
CONFIG_CRYPTO_LIB_AESGCM=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_GF128MUL=m
CONFIG_CRYPTO_LIB_BLAKE2B=m
CONFIG_CRYPTO_LIB_BLAKE2S_ARCH=y
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_ARCH=y
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_CURVE25519_ARCH=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_GF128HASH=y
CONFIG_CRYPTO_LIB_GF128HASH_ARCH=y
CONFIG_CRYPTO_LIB_MD5=y
CONFIG_CRYPTO_LIB_NH=m
CONFIG_CRYPTO_LIB_NH_ARCH=y
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_ARCH=y
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA1_ARCH=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_SHA256_ARCH=y
CONFIG_CRYPTO_LIB_SHA512=y
CONFIG_CRYPTO_LIB_SHA512_ARCH=y
CONFIG_CRYPTO_LIB_SHA3=y
CONFIG_XOR_BLOCKS=m
CONFIG_XOR_BLOCKS_ARCH=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_ARM64=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_RISCV=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_INTERVAL_TREE_SPAN_ITER=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_CLOSURES=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS_HELPERS=y
CONFIG_NEED_SG_DMA_FLAGS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
# CONFIG_SWIOTLB_DYNAMIC is not set
CONFIG_DMA_NEED_SYNC=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_NUMA_CMA is not set
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_OVERFLOW_PROTECT=y
CONFIG_VDSO_GETRANDOM=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_6x10 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_TER10x18 is not set
CONFIG_FONT_TER16x32=y
# CONFIG_FONT_6x8 is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_MAX_FRAMES=64
CONFIG_SBITMAP=y
CONFIG_PARMAN=m
CONFIG_OBJAGG=m
# CONFIG_LWQ_TEST is not set
# end of Library routines
CONFIG_PLDMFW=y
CONFIG_ASN1_ENCODER=m
CONFIG_FIRMWARE_TABLE=y
CONFIG_UNION_FIND=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_PRINTK_EXECUTION_CTX=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_BUGVERBOSE_DETAILED is not set
# end of printk and dmesg options
# CONFIG_DEBUG_KERNEL is not set
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_ULEB128=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_OBJTOOL=y
# CONFIG_OBJTOOL_WERROR is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_ARCH_HAS_UBSAN=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_ARCH_HAS_PTDUMP=y
CONFIG_PTDUMP=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_PER_VMA_LOCK_STATS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
# CONFIG_MEM_ALLOC_PROFILING is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
# CONFIG_KFENCE_DEFERRABLE is not set
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
CONFIG_HAVE_ARCH_KMSAN=y
# end of Memory Debugging
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_TIMEOUT=0
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_WW_MUTEX_SELFTEST=m
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
#
# Debug kernel data structures
#
# CONFIG_DEBUG_CLOSURES is not set
# end of Debug kernel data structures
#
# RCU Debugging
#
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_CPU_STALL_CPUTIME is not set
# end of RCU Debugging
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FREGS=y
CONFIG_HAVE_FTRACE_GRAPH_FUNC=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_SINGLE_FTRACE_DIRECT_OPS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_REGS_HAVING_PT_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_JMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_OBJTOOL_NOP_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
# CONFIG_FUNCTION_GRAPH_RETADDR is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_DYNAMIC_FTRACE_WITH_JMP=y
# CONFIG_FUNCTION_SELF_TRACING is not set
CONFIG_FPROBE=y
CONFIG_FUNCTION_PROFILER=y
# CONFIG_STACK_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_OSNOISE_TRACER=y
CONFIG_TIMERLAT_TRACER=y
CONFIG_MMIOTRACE=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACE_SYSCALL_BUF_SIZE_DEFAULT=63
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_FPROBE_EVENTS=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_EPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_USER_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE_SORT_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_MMIOTRACE_TEST is not set
CONFIG_PREEMPTIRQ_DELAY_TEST=m
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
CONFIG_KPROBE_EVENT_GEN_TEST=m
# CONFIG_HIST_TRIGGERS_DEBUG is not set
# CONFIG_RV is not set
# CONFIG_TRACE_REMOTE_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# x86 Debugging
#
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_DHRY is not set
CONFIG_LKDTM=m
# CONFIG_TEST_DIV64 is not set
# CONFIG_TEST_MULDIV64 is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_MAPLE_TREE is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_IDA is not set
CONFIG_TEST_PARMAN=m
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_WORKQUEUE is not set
# CONFIG_TEST_BPF is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_TEST_DYNAMIC_DEBUG is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_KALLSYMS is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_OBJAGG is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_HMM is not set
# CONFIG_TEST_FREE_PAGES is not set
CONFIG_TEST_FPU=m
CONFIG_TEST_CLOCKSOURCE_WATCHDOG=m
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
CONFIG_IO_URING_ZCRX=y
CONFIG_IO_URING_BPF=y
0005:004C:026C.0007
0005:0A5C:0001.0009
Controller 5C:F3:70:A2:F8:56 (public)
Manufacturer: 0x000f (15)
Version: 0x07 (7)
Name: BlueZ 5.86
Alias: BlueZ 5.86
Class: 0x00600000 (6291456)
Powered: yes
PowerState: on
Discoverable: no
DiscoverableTimeout: 0x000000b4 (180)
Pairable: yes
UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
UUID: Vendor specific (03b80e5a-ede8-4b33-a751-6ce34ec4c700)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
UUID: Handsfree Audio Gateway (0000111f-0000-1000-8000-00805f9b34fb)
UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb)
UUID: Device Information (0000180a-0000-1000-8000-00805f9b34fb)
Modalias: usb:v1D6Bp0246d0556
Discovering: no
Roles: central
Roles: peripheral
Advertising Features:
ActiveInstances: 0x00 (0)
SupportedInstances: 0x05 (5)
SupportedIncludes: tx-power
SupportedIncludes: appearance
SupportedIncludes: local-name
SupportedCapabilities.MaxAdvLen: 0x1f (31)
SupportedCapabilities.MaxScnRspLen: 0x1f (31)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8001 Intel Corp. Integrated Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0a5c:21e8 Broadcom Corp. BCM20702A0 Bluetooth 4.0
Bus 002 Device 005: ID 8087:0a2a Intel Corp. Bluetooth wireless interface
Bus 002 Device 006: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 007: ID 20b1:000a XMOS Ltd xCORE USB Audio 2.0
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 001: Dev 002, If 0, Class=Hub, Driver=hub/8p, 480M
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/11p, 480M
|__ Port 001: Dev 007, If 0, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 001: Dev 007, If 1, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 001: Dev 007, If 2, Class=Application Specific Interface, Driver=[none], 480M
|__ Port 002: Dev 003, If 0, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 002: Dev 003, If 1, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 002: Dev 003, If 2, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 002: Dev 003, If 3, Class=Application Specific Interface, Driver=[none], 12M
|__ Port 004: Dev 005, 12M
|__ Port 008: Dev 006, If 0, Class=Vendor Specific Class, Driver=rtsx_usb, 480M
/: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/4p, 5000M
hid_apple 28672 0
btusb 77824 0
btbcm 20480 1 btusb
btmtk 32768 1 btusb
mac_hid 12288 0
hid_logitech_hidpp 69632 0
btrtl 36864 1 btusb
btintel 65536 1 btusb
bluetooth 1101824 34 btrtl,btmtk,btintel,btbcm,btusb,hci_vhci,rfcomm
rfkill 40960 8 iwlmvm,bluetooth,cfg80211
ecdh_generic 12288 2 bluetooth
crc16 12288 1 bluetooth
uhid 20480 2
hid_logitech_dj 36864 0
hid_generic 12288 0
usbhid 81920 2 hid_logitech_dj,hid_logitech_hidpp
hid 253952 6 usbhid,hid_apple,hid_generic,uhid,hid_logitech_dj,hid_logitech_hidpp
usbcore 385024 11 xhci_hcd,ehci_pci,snd_usb_audio,usbhid,snd_usbmidi_lib,btmtk,rtsx_usb,ehci_hcd,btusb,xhci_pci,hid_logitech_hidpp
NAME="Void"
ID="void"
PRETTY_NAME="Void Linux"
HOME_URL="https://voidlinux.org/"
DOCUMENTATION_URL="https://docs.voidlinux.org/"
LOGO="void-logo"
ANSI_COLOR="0;38;2;71;128;97"
DISTRIB_ID="void"
Crash log (dmesg)
[14299.726587] BUG: unable to handle page fault for address: ffffffffffffffe4
[14299.726604] #PF: supervisor read access in kernel mode
[14299.726610] #PF: error_code(0x0000) - not-present page
[14299.726616] PGD 232825067 P4D 232825067 PUD 232827067 PMD 0
[14299.726630] Oops: Oops: 0000 [#1] SMP NOPTI
[14299.726642] CPU: 3 UID: 0 PID: 722 Comm: bluetoothd Tainted: G S E 7.1.0-rc2-custom #1 PREEMPT(full)
[14299.726655] Tainted: [S]=CPU_OUT_OF_SPEC, [E]=UNSIGNED_MODULE
[14299.726659] Hardware name: BESSTAR (HK) LIMITED U500-H/VB9, BIOS 0.010 04/07/2020
[14299.726665] RIP: 0010:hidinput_hid_event+0x321/0x910 [hid]
[14299.726685] Code: 00 41 8b 57 30 48 8d 68 c8 48 39 c7 75 1c e9 17 fe ff ff 66 0f 1f 44 00 00 48 8b 45 38 48 8d 68 c8 48 39 c7 0f 84 00 fe ff ff <3b> 55 1c 75 ea 48 85 ed 0f 84 f2 fd ff ff 8b 03 3d 44 00 85 00 0f
[14299.726693] RSP: 0018:ffffd392026c7ae0 EFLAGS: 00010286
[14299.726701] RAX: 0000000000000000 RBX: ffff8a7a9a783da4 RCX: 0000000000000000
[14299.726707] RDX: 0000000000000090 RSI: 0000000000000016 RDI: ffff8a7a9bccdc18
[14299.726712] RBP: ffffffffffffffc8 R08: 0000000000000000 R09: ffff8a7a95e1c800
[14299.726718] R10: 0000000000000014 R11: ffff8a7a9a783238 R12: ffff8a7a9bccc000
[14299.726723] R13: ffff8a7a9a783da4 R14: 0000000000000000 R15: ffff8a7a95d2f000
[14299.726729] FS: 00007fe112863540(0000) GS:ffff8a7e2799c000(0000) knlGS:0000000000000000
[14299.726736] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[14299.726742] CR2: ffffffffffffffe4 CR3: 00000001157e6006 CR4: 00000000003726f0
[14299.726748] Call Trace:
[14299.726755] <TASK>
[14299.726760] ? __wake_up+0x44/0x60
[14299.726779] hid_process_event+0x119/0x130 [hid]
[14299.726794] hid_report_raw_event+0x315/0x4b0 [hid]
[14299.726810] __hid_input_report.constprop.0+0xfe/0x190 [hid]
[14299.726824] uhid_char_write+0x41b/0x550 [uhid]
[14299.726833] ? rw_verify_area+0x54/0x180
[14299.726842] vfs_writev+0x26c/0x3d0
[14299.726856] ? ksys_read+0xbe/0xe0
[14299.726867] ? do_writev+0xeb/0x110
[14299.726875] do_writev+0xeb/0x110
[14299.726885] do_syscall_64+0xea/0x15e0
[14299.726899] ? __x64_sys_ppoll+0xf3/0x160
[14299.726910] ? switch_fpu_return+0x50/0xe0
[14299.726920] ? do_syscall_64+0x290/0x15e0
[14299.726930] ? ksys_read+0x6b/0xe0
[14299.726940] ? do_syscall_64+0xea/0x15e0
[14299.726949] ? do_syscall_64+0xea/0x15e0
[14299.726957] ? do_syscall_64+0x9f/0x15e0
[14299.726965] ? __irq_exit_rcu+0x4c/0xf0
[14299.726974] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[14299.726982] RIP: 0033:0x7fe11299e197
[14299.726990] Code: 48 89 fa 4c 89 df e8 98 af 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
[14299.726996] RSP: 002b:00007ffd64b38710 EFLAGS: 00000202 ORIG_RAX: 0000000000000014
[14299.727005] RAX: ffffffffffffffda RBX: 00007fe112863540 RCX: 00007fe11299e197
[14299.727010] RDX: 0000000000000001 RSI: 00007ffd64b38780 RDI: 0000000000000012
[14299.727015] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
[14299.727019] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000012
[14299.727024] R13: 00005623af2376b0 R14: 0000000000000000 R15: 00005623af269f70
[14299.727033] </TASK>
[14299.727037] Modules linked in: ccm(E) nls_utf8(E) cifs(E) nls_ucs2_utils(E) cifs_md4(E) dns_resolver(E) netfs(E) rfcomm(E) snd_seq_dummy(E) snd_hrtimer(E) input_leds(E) hid_apple(E) hid_generic(E) algif_hash(E) algif_skcipher(E) af_alg(E) ovpn(E) ip6_udp_tunnel(E) udp_tunnel(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) intel_rapl_msr(E) intel_rapl_common(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) iwlmvm(E) rtsx_usb_ms(E) kvm(E) at24(E) rtsx_usb_sdmmc(E) memstick(E) iTCO_wdt(E) spi_intel_platform(E) spi_intel(E) mac80211(E) intel_pmc_bxt(E) irqbypass(E) mei_pxp(E) mei_hdcp(E) rapl(E) libarc4(E) intel_cstate(E) intel_uncore(E) evdev(E) pcspkr(E) mac_hid(E) snd_usb_audio(E) iwlwifi(E) snd_ctl_led(E) snd_hda_codec_alc269(E) snd_usbmidi_lib(E) i2c_i801(E) snd_rawmidi(E) btusb(E) snd_hda_codec_realtek_lib(E) snd_hda_codec_intelhdmi(E) snd_hda_scodec_component(E) btbcm(E) i2c_smbus(E) snd_hda_codec_generic(E) rtsx_usb(E) mc(E) snd_hda_codec_hdmi(E) btmtk(E) i2c_mux(E) btrtl(E) snd_hda_intel(E)
[14299.727186] btintel(E) r8169(E) cfg80211(E) intel_pmc_core(E) i2c_designware_platform(E) snd_hda_codec(E) pmt_telemetry(E) realtek(E) i2c_designware_core(E) phy_package(E) pmt_discovery(E) snd_hda_core(E) snd_intel_dspcfg(E) ccp(E) pmt_class(E) intel_pmc_ssram_telemetry(E) snd_intel_sdw_acpi(E) snd_hwdep(E) intel_vsec(E) rng_core(E) mei_me(E) acpi_pad(E) ac(E) tiny_power_button(E) lpc_ich(E) mei(E) snd_pcm(E) dm_raid(E) raid456(E) md_mod(E) async_raid6_recov(E) async_memcpy(E) async_pq(E) async_xor(E) async_tx(E) snd_seq(E) snd_seq_device(E) snd_timer(E) snd(E) soundcore(E) vhost_vsock(E) vmw_vsock_virtio_transport_common(E) vsock(E) vhost_net(E) vhost(E) vhost_iotlb(E) tap(E) hci_vhci(E) bluetooth(E) rfkill(E) ecdh_generic(E) ecc(E) crc16(E) vfio_iommu_type1(E) vfio(E) iommufd(E) uhid(E) hid(E) uinput(E) userio(E) ppp_generic(E) slhc(E) tun(E) loop(E) nvram(E) cuse(E) fuse(E) i915(E) intel_gtt(E) drm_buddy(E) sd_mod(E) ttm(E) agpgart(E) i2c_algo_bit(E) drm_display_helper(E) ahci(E) cec(E) xhci_pci(E) rc_core(E)
[14299.727346] ehci_pci(E) libahci(E) xhci_hcd(E) drm_client_lib(E) ehci_hcd(E) libata(E) aesni_intel(E) drm_kms_helper(E) video(E) gf128mul(E) usbcore(E) scsi_mod(E) aead(E) wmi(E) scsi_common(E) drm(E) usb_common(E) sdhci_acpi(E) sdhci(E) dw_dmac(E) mmc_core(E) dw_dmac_core(E) pinctrl_lynxpoint(E) button(E) dm_mirror(E) dm_region_hash(E) dm_log(E) dm_mod(E) btrfs(E) libblake2b(E) raid6_pq(E) xor(E)
[14299.727414] Unloaded tainted modules: acpi_cpufreq(E):1 fjes(E):2
[14299.727431] CR2: ffffffffffffffe4
[14299.727437] ---[ end trace 0000000000000000 ]---
[14299.727443] RIP: 0010:hidinput_hid_event+0x321/0x910 [hid]
[14299.727458] Code: 00 41 8b 57 30 48 8d 68 c8 48 39 c7 75 1c e9 17 fe ff ff 66 0f 1f 44 00 00 48 8b 45 38 48 8d 68 c8 48 39 c7 0f 84 00 fe ff ff <3b> 55 1c 75 ea 48 85 ed 0f 84 f2 fd ff ff 8b 03 3d 44 00 85 00 0f
[14299.727464] RSP: 0018:ffffd392026c7ae0 EFLAGS: 00010286
[14299.727471] RAX: 0000000000000000 RBX: ffff8a7a9a783da4 RCX: 0000000000000000
[14299.727476] RDX: 0000000000000090 RSI: 0000000000000016 RDI: ffff8a7a9bccdc18
[14299.727481] RBP: ffffffffffffffc8 R08: 0000000000000000 R09: ffff8a7a95e1c800
[14299.727485] R10: 0000000000000014 R11: ffff8a7a9a783238 R12: ffff8a7a9bccc000
[14299.727490] R13: ffff8a7a9a783da4 R14: 0000000000000000 R15: ffff8a7a95d2f000
[14299.727495] FS: 00007fe112863540(0000) GS:ffff8a7e2799c000(0000) knlGS:0000000000000000
[14299.727501] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[14299.727506] CR2: ffffffffffffffe4 CR3: 00000001157e6006 CR4: 00000000003726f0
[14299.727512] note: bluetoothd[722] exited with irqs disabled
^ permalink raw reply
* Re: [PATCH v4 2/2] Input: isa1200 - new driver for Imagis ISA1200
From: Svyatoslav Ryhel @ 2026-05-08 11:13 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij,
linux-input, devicetree, linux-kernel
In-Reply-To: <afzJUcvQth6v9KGC@google.com>
чт, 7 трав. 2026 р. о 22:26 Dmitry Torokhov <dmitry.torokhov@gmail.com> пише:
>
> Hi Svyatoslav,
>
> On Thu, May 07, 2026 at 04:39:48PM +0300, Svyatoslav Ryhel wrote:
> > From: Linus Walleij <linusw@kernel.org>
> >
> > The ISA1200 is a haptic feedback unit from Imagis Technology using two
> > motors for haptic feedback in mobile phones. Used in many mobile devices
> > c. 2012 including Samsung Galxy S Advance GT-I9070 (Janice), Samsung Beam
> > GT-I8350 (Gavini), LG Optimus 4X P880 and LG Optimus Vu P895.
> >
> > The exact datasheet for the ISA1200 is not available; all data was modeled
> > based on available downstream kernel sources for various devices and
> > fragments of information scattered across the internet.
> >
> > Tested-by: Linus Walleij <linusw@kernel.org> # GT-I9070 Janice
> > Signed-off-by: Linus Walleij <linusw@kernel.org>
> > Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > ---
> > drivers/input/misc/Kconfig | 12 +
> > drivers/input/misc/Makefile | 1 +
> > drivers/input/misc/isa1200.c | 540 +++++++++++++++++++++++++++++++++++
> > 3 files changed, 553 insertions(+)
> > create mode 100644 drivers/input/misc/isa1200.c
> >
> > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > index 94a753fcb64f..52f192104ee2 100644
> > --- a/drivers/input/misc/Kconfig
> > +++ b/drivers/input/misc/Kconfig
> > @@ -852,6 +852,18 @@ config INPUT_IQS7222
> > To compile this driver as a module, choose M here: the
> > module will be called iqs7222.
> >
> > +config INPUT_ISA1200_HAPTIC
> > + tristate "Imagis ISA1200 haptic feedback unit"
> > + depends on I2C
> > + select INPUT_FF_MEMLESS
> > + select REGMAP_I2C
> > + help
> > + Say Y to enable support for the Imagis ISA1200 haptic
> > + feedback unit.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called isa1200.
> > +
> > config INPUT_CMA3000
> > tristate "VTI CMA3000 Tri-axis accelerometer"
> > help
> > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> > index 415fc4e2918b..d62bf2e9d85f 100644
> > --- a/drivers/input/misc/Makefile
> > +++ b/drivers/input/misc/Makefile
> > @@ -49,6 +49,7 @@ obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
> > obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o
> > obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o
> > obj-$(CONFIG_INPUT_IQS7222) += iqs7222.o
> > +obj-$(CONFIG_INPUT_ISA1200_HAPTIC) += isa1200.o
> > obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
> > obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
> > obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
> > diff --git a/drivers/input/misc/isa1200.c b/drivers/input/misc/isa1200.c
> > new file mode 100644
> > index 000000000000..f8dba8a95c7d
> > --- /dev/null
> > +++ b/drivers/input/misc/isa1200.c
> > @@ -0,0 +1,540 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +
> > +#include <linux/array_size.h>
> > +#include <linux/bitmap.h>
> > +#include <linux/bits.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/devm-helpers.h>
> > +#include <linux/err.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/input.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/property.h>
> > +#include <linux/pwm.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/units.h>
> > +
> > +/*
> > + * System control (LDO regulator)
> > + *
> > + * LDO voltage to register mapping is linear, but it is split in two parts:
> > + * 2.3V - 3.0V map to 0x08 - 0x0f; 3.1V - 3.8V map to 0x00 - 0x7
> > + */
> > +
> > +#define ISA1200_SCTRL 0x00
> > +#define ISA1200_LDO_VOLTAGE_BASE 0x08
> > +#define ISA1200_LDO_VOLTAGE_STEP 100000
> > +#define ISA1200_LDO_VOLTAGE_2V3 23
> > +#define ISA1200_LDO_VOLTAGE_3V1 31
> > +#define ISA1200_LDO_VOLTAGE_MIN 2300000
> > +#define ISA1200_LDO_VOLTAGE_MAX 3800000
> > +
> > +/*
> > + * The output frequency is calculated with this formula:
> > + *
> > + * base clock frequency
> > + * fout = -----------------------------------------
> > + * (128 - PWM_FREQ) * 2 * PLLDIV * PWM_PERIOD
> > + *
> > + * The base clock frequency is the clock frequency provided on the
> > + * clock input to the chip, divided by the value in HCTRL0
> > + *
> > + * PWM_FREQ is configured in register HCTRL4, it is common to set this
> > + * to 0 to get only two variables to calculate.
> > + *
> > + * PLLDIV is configured in register HCTRL3 (bits 7..4, so 0..15)
> > + * PWM_PERIOD is configured in register HCTRL6
> > + * Further the duty cycle can be configured in HCTRL5
> > + */
> > +
> > +/*
> > + * HCTRL0 configures clock or PWM input and selects the divider for
> > + * the clock input.
> > + */
> > +#define ISA1200_HCTRL0 0x30
> > +#define ISA1200_HCTRL0_HAP_ENABLE BIT(7)
> > +#define ISA1200_HCTRL0_PWM_GEN_MODE BIT(4)
> > +#define ISA1200_HCTRL0_PWM_INPUT_MODE BIT(3)
> > +#define ISA1200_HCTRL0_CLKDIV_128 128
> > +
> > +/*
> > + * HCTRL1 configures the motor type and clock sourse
> > + */
> > +#define ISA1200_HCTRL1 0x31
> > +#define ISA1200_HCTRL1_EXT_CLOCK BIT(7)
> > +#define ISA1200_HCTRL1_DAC_INVERT BIT(6)
> > +#define ISA1200_HCTRL1_MODE(n) (((n) & 1) << 5)
>
> I wonder if this should simply be BIT(5) and you conditionally use it in
> the code. The macro is not really usable to disable the setting...
>
> > +
> > +/* HCTRL2 controls software reset of the chip */
> > +#define ISA1200_HCTRL2 0x32
> > +#define ISA1200_HCTRL2_SW_RESET BIT(0)
> > +
> > +/*
> > + * HCTRL3 controls the PLL divisor
> > + *
> > + * Bits [0,1] are always set to 1 (we don't know what they are
> > + * used for) and bit 4 and upward control the PLL divisor.
> > + */
> > +#define ISA1200_HCTRL3 0x33
> > +#define ISA1200_HCTRL3_DEFAULT 0x03
> > +#define ISA1200_HCTRL3_PLLDIV(n) (((n) & 0xf) << 4)
> > +
> > +/* HCTRL4 controls the PWM frequency of external channel */
> > +#define ISA1200_HCTRL4 0x34
> > +
> > +/* HCTRL5 controls the PWM high duty cycle of internal channel */
> > +#define ISA1200_HCTRL5 0x35
> > +
> > +/* HCTRL6 controls the PWM period of internal channel */
> > +#define ISA1200_HCTRL6 0x36
> > +#define ISA1200_HCTRL6_PERIOD_SCALE 100
> > +
> > +/* The use for these registers is unknown but they exist */
> > +#define ISA1200_HCTRL7 0x37
> > +#define ISA1200_HCTRL8 0x38
> > +#define ISA1200_HCTRL9 0x39
> > +#define ISA1200_HCTRLA 0x3a
> > +#define ISA1200_HCTRLB 0x3b
> > +#define ISA1200_HCTRLC 0x3c
> > +#define ISA1200_HCTRLD 0x3d
> > +
> > +#define ISA1200_EN_PINS_MAX 2
> > +
> > +struct isa1200_config {
> > + u32 ldo_voltage;
> > + u32 mode;
> > + u32 clkdiv;
> > + u32 plldiv;
> > + u32 freq;
> > + u32 period;
> > + u32 duty;
> > +};
> > +
> > +struct isa1200 {
> > + struct input_dev *input;
> > + struct regmap *map;
> > +
> > + struct clk *clk;
> > + struct pwm_device *pwm;
> > + struct gpio_descs *enable_gpios;
> > +
> > + struct work_struct play_work;
> > + struct isa1200_config config;
> > +
> > + int level;
> > + bool clk_on;
>
> I think you need not only clk_on, but general "active" flag that you
> would set at the end of isa1200_start().
>
> > +};
> > +
> > +static const struct regmap_config isa1200_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + .max_register = ISA1200_HCTRLD,
> > +};
> > +
> > +static void isa1200_start(struct isa1200 *isa)
> > +{
> > + struct isa1200_config *config = &isa->config;
> > + struct pwm_state state;
> > + u8 hctrl0 = 0, hctrl1 = 0;
> > + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> > + int ret;
>
> Please use "error" or "err" for all variables that only hold error codes
> (or 0) instead of a real value that is used for something.
>
> > +
> > + if (!isa->clk_on) {
> > + ret = clk_prepare_enable(isa->clk);
>
> This return 0 on success so
>
> if (error)
> return;
>
> > + if (ret < 0)
> > + return;
> > +
> > + isa->clk_on = true;
> > + }
> > +
> > + bitmap_fill(values, ISA1200_EN_PINS_MAX);
> > + gpiod_multi_set_value_cansleep(isa->enable_gpios, values);
> > +
> > + usleep_range(200, 300);
> > +
> > + regmap_write(isa->map, ISA1200_SCTRL, config->ldo_voltage);
> > +
> > + if (isa->clk) {
> > + hctrl0 = ISA1200_HCTRL0_PWM_GEN_MODE;
> > + hctrl1 = ISA1200_HCTRL1_EXT_CLOCK;
> > + }
> > +
> > + if (isa->pwm) {
> > + hctrl0 = ISA1200_HCTRL0_PWM_INPUT_MODE;
> > + hctrl1 = 0;
> > + }
> > +
> > + hctrl0 |= __ffs(config->clkdiv / ISA1200_HCTRL0_CLKDIV_128);
> > + hctrl1 |= ISA1200_HCTRL1_DAC_INVERT;
> > + hctrl1 |= ISA1200_HCTRL1_MODE(config->mode);
> > +
> > + regmap_write(isa->map, ISA1200_HCTRL0, hctrl0);
> > + regmap_write(isa->map, ISA1200_HCTRL1, hctrl1);
> > +
> > + /* Make sure to de-assert software reset */
> > + regmap_write(isa->map, ISA1200_HCTRL2, 0x00);
> > +
> > + /* PLL divisor */
> > + regmap_write(isa->map, ISA1200_HCTRL3,
> > + ISA1200_HCTRL3_PLLDIV(config->plldiv) |
> > + ISA1200_HCTRL3_DEFAULT);
> > +
> > + /* Frequency */
> > + regmap_write(isa->map, ISA1200_HCTRL4, config->freq);
> > + /* Duty cycle */
> > + regmap_write(isa->map, ISA1200_HCTRL5, config->period >> 1);
> > + /* Period */
> > + regmap_write(isa->map, ISA1200_HCTRL6, config->period);
> > +
> > + hctrl0 |= ISA1200_HCTRL0_HAP_ENABLE;
> > + regmap_write(isa->map, ISA1200_HCTRL0, hctrl0);
> > +
> > + if (isa->clk)
> > + regmap_write(isa->map, ISA1200_HCTRL5, config->duty);
> > +
> > + if (isa->pwm) {
> > + pwm_get_state(isa->pwm, &state);
> > + state.duty_cycle = config->duty;
> > + state.enabled = true;
> > + pwm_apply_might_sleep(isa->pwm, &state);
> > + }
> > +}
> > +
> > +static void isa1200_power_off(void *data)
> > +{
> > + struct isa1200 *isa = data;
> > +
> > + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> > +
> > + bitmap_zero(values, ISA1200_EN_PINS_MAX);
> > + gpiod_multi_set_value_cansleep(isa->enable_gpios, values);
> > +
> > + if (isa->clk_on) {
> > + clk_disable_unprepare(isa->clk);
> > + isa->clk_on = false;
> > + }
> > +}
> > +
> > +static void isa1200_stop(struct isa1200 *isa)
> > +{
> > + struct pwm_state state;
> > +
> > + if (isa->pwm) {
> > + pwm_get_state(isa->pwm, &state);
> > + state.duty_cycle = 0;
> > + state.enabled = false;
> > + pwm_apply_might_sleep(isa->pwm, &state);
> > + }
> > +
> > + regmap_write(isa->map, ISA1200_HCTRL0, 0x00);
> > + isa1200_power_off(isa);
> > +}
> > +
> > +static void isa1200_play_work(struct work_struct *work)
> > +{
> > + struct isa1200 *isa =
> > + container_of(work, struct isa1200, play_work);
> > +
> > + guard(mutex)(&isa->input->mutex);
>
> I think this mutex is dangerous here. You really want to stop/cancel
> work in suspend() and close() instead of blocking on the mutex and then
> continuing.
>
> > +
> > + if (isa->level)
> > + isa1200_start(isa);
> > + else
> > + isa1200_stop(isa);
> > +}
> > +
> > +static int isa1200_vibrator_play_effect(struct input_dev *input, void *data,
> > + struct ff_effect *effect)
> > +{
> > + struct isa1200 *isa = input_get_drvdata(input);
> > + int level;
> > +
> > + /*
> > + * TODO: we currently only support rumble.
> > + * The ISA1200 can control two motors and some devices
> > + * also have two motors mounted.
> > + */
> > + level = effect->u.rumble.strong_magnitude;
> > + if (!level)
> > + level = effect->u.rumble.weak_magnitude;
> > +
> > + dev_dbg(&input->dev, "FF effect type %d level %d\n",
> > + effect->type, level);
> > +
> > + if (isa->level != level) {
> > + isa->level = level;
> > + schedule_work(&isa->play_work);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void isa1200_vibrator_close(struct input_dev *input)
> > +{
> > + struct isa1200 *isa = input_get_drvdata(input);
> > +
> > + cancel_work_sync(&isa->play_work);
> > +
> > + if (isa->level)
>
> So here I think you need to check that "active" flag that would represent
> the committed state.
>
> > + isa1200_stop(isa);
> > +
> > + isa->level = 0;
> > +}
> > +
> > +static int isa1200_of_probe(struct i2c_client *client)
> > +{
> > + static const char * const isa1200_supplies[] = { "vdd", "vddp" };
> > + struct isa1200 *isa = i2c_get_clientdata(client);
> > + struct isa1200_config *config = &isa->config;
> > + struct device *dev = &client->dev;
> > + struct fwnode_handle *ldo_node;
> > + int ret;
> > +
> > + isa->clk = devm_clk_get_optional(dev, NULL);
> > + if (IS_ERR(isa->clk))
> > + return dev_err_probe(dev, PTR_ERR(isa->clk),
> > + "failed to get clock\n");
> > +
> > + isa->pwm = devm_pwm_get(dev, NULL);
> > + if (IS_ERR(isa->pwm)) {
> > + ret = PTR_ERR(isa->pwm);
> > + if (ret == -ENODEV || ret == -EINVAL)
> > + isa->pwm = NULL;
> > + else
> > + return dev_err_probe(dev, ret, "getting PWM\n");
> > + }
> > +
> > + if (!isa->clk && !isa->pwm)
> > + return dev_err_probe(dev, -EINVAL,
> > + "clock or PWM are required, none were provided\n");
> > +
> > + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(isa1200_supplies),
> > + isa1200_supplies);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "failed to set up supplies\n");
> > +
> > + isa->enable_gpios = devm_gpiod_get_array_optional(dev, "control",
> > + GPIOD_OUT_LOW);
> > + if (IS_ERR(isa->enable_gpios))
> > + return dev_err_probe(dev, PTR_ERR(isa->enable_gpios),
> > + "failed to get enable gpios\n");
> > +
> > + ldo_node = device_get_named_child_node(dev, "ldo");
> > + if (!ldo_node)
> > + return dev_err_probe(dev, -ENODEV,
> > + "failed to get embedded LDO node\n");
> > +
> > + ret = fwnode_property_read_u32(ldo_node, "regulator-min-microvolt",
> > + &config->ldo_voltage);
> > + fwnode_handle_put(ldo_node);
> > + if (ret)
> > + return dev_err_probe(dev, ret,
> > + "failed to get ldo voltage\n");
> > +
> > + config->ldo_voltage = clamp(config->ldo_voltage,
> > + ISA1200_LDO_VOLTAGE_MIN,
> > + ISA1200_LDO_VOLTAGE_MAX);
> > +
> > + config->ldo_voltage /= ISA1200_LDO_VOLTAGE_STEP;
> > + if (config->ldo_voltage < ISA1200_LDO_VOLTAGE_3V1)
> > + config->ldo_voltage = config->ldo_voltage -
> > + ISA1200_LDO_VOLTAGE_2V3 +
> > + ISA1200_LDO_VOLTAGE_BASE;
> > + else
> > + config->ldo_voltage -= ISA1200_LDO_VOLTAGE_3V1;
> > +
> > + config->mode = 0; /* LRA_MODE */
> > + device_property_read_u32(dev, "imagis,mode", &config->mode);
> > +
> > + config->clkdiv = ISA1200_HCTRL0_CLKDIV_128;
> > + device_property_read_u32(dev, "imagis,clk-div", &config->clkdiv);
> > + if (!config->clkdiv)
> > + return dev_err_probe(dev, -EINVAL, "clk-div cannot be zero\n");
> > +
> > + config->clkdiv = clamp(config->clkdiv, ISA1200_HCTRL0_CLKDIV_128,
> > + ISA1200_HCTRL0_CLKDIV_128 << 3);
> > +
> > + ret = device_property_read_u32(dev, "imagis,pll-div", &config->plldiv);
> > + if (ret < 0 || !config->plldiv)
> > + config->plldiv = 1;
> > +
> > + config->period = 0;
> > + config->freq = 0;
> > + config->duty = 0;
> > +
> > + if (isa->clk) {
> > + ret = device_property_read_u32(dev, "imagis,period-ns",
> > + &config->period);
> > + if (ret)
> > + return dev_err_probe(dev, ret,
> > + "failed to get period\n");
> > +
> > + /*
> > + * TODO: The scale value is arbitrary, but it fits observations
> > + * quite well, and the exact conversion method is unknown.
> > + * The period property value returned above is the HCTRL6
> > + * register value set by the vendor code, multiplied by 100.
> > + */
> > + config->period /= ISA1200_HCTRL6_PERIOD_SCALE;
> > + config->duty = config->period >> 1;
> > + }
> > +
> > + if (isa->pwm) {
> > + struct pwm_state state;
> > +
> > + pwm_init_state(isa->pwm, &state);
> > +
> > + if (!state.period)
> > + return dev_err_probe(dev, -EINVAL,
> > + "PWM period cannot be zero\n");
> > +
> > + config->freq = div64_u64(NANO, state.period * config->clkdiv);
> > + config->duty = state.period >> 1;
> > +
> > + ret = pwm_apply_might_sleep(isa->pwm, &state);
> > + if (ret)
> > + return dev_err_probe(dev, ret,
> > + "failed to apply initial PWM state\n");
> > + }
> > +
> > + /*
> > + * TODO: If device is using a clock, this property should return the
> > + * value written to the HCTRL5 register by downstrem code. It likely
> > + * needs to be converted into a meaningful duty cycle value, though
> > + * unfortunately the exact conversion mechanism is unknown. If the
> > + * device uses PWM, this property will return the correct duty cycle
> > + * in nanoseconds.
> > + */
> > + device_property_read_u32(dev, "imagis,duty-cycle-ns", &config->duty);
> > +
> > + return 0;
> > +}
> > +
> > +static int isa1200_probe(struct i2c_client *client)
> > +{
> > + struct isa1200 *isa;
> > + struct device *dev = &client->dev;
> > + DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX);
> > + u32 val;
> > + int ret;
> > +
> > + isa = devm_kzalloc(dev, sizeof(*isa), GFP_KERNEL);
> > + if (!isa)
> > + return -ENOMEM;
> > +
> > + isa->input = devm_input_allocate_device(dev);
> > + if (!isa->input)
> > + return -ENOMEM;
> > +
> > + i2c_set_clientdata(client, isa);
> > +
> > + ret = isa1200_of_probe(client);
> > + if (ret)
> > + return ret;
> > +
> > + isa->map = devm_regmap_init_i2c(client, &isa1200_regmap_config);
> > + if (IS_ERR(isa->map))
> > + return dev_err_probe(dev, PTR_ERR(isa->map),
> > + "failed to initialize register map\n");
> > +
> > + ret = clk_prepare_enable(isa->clk);
> > + if (ret < 0)
> > + return dev_err_probe(dev, ret, "failed to enable clock\n");
> > +
> > + isa->clk_on = true;
> > +
> > + bitmap_fill(values, ISA1200_EN_PINS_MAX);
> > + gpiod_multi_set_value_cansleep(isa->enable_gpios, values);
>
> You should factor our isa1200_power_on() from isa1200_start() and use it
> here.
>
> > +
> > + ret = devm_add_action_or_reset(dev, isa1200_power_off, isa);
> > + if (ret)
> > + return ret;
>
> close() is taking care of powering off the device.
>
> > +
> > + usleep_range(200, 300);
> > +
> > + /* Read a register so we know that regmap and I2C transport works */
> > + ret = regmap_read(isa->map, ISA1200_SCTRL, &val);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "failed to read SCTRL\n");
>
> You should call isa1200_power_off() here. You do not know when the first
> effect will play. In the meantime the device should be in low power
> state.
>
> > +
> > + ret = devm_work_autocancel(dev, &isa->play_work, isa1200_play_work);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "failed to init work\n");
>
> I do not think you need it here. You supply input->close() and that
> should take care of stopping/canceling the work. Input core guarantees
> to call close() if the device is "open" whne unregistering.
>
> > +
> > + isa->input->name = "isa1200-haptic";
> > + isa->input->id.bustype = BUS_HOST;
>
> Not BUS_I2C?
>
> > + isa->input->dev.parent = dev;
>
> Parent is already set by devm_input_allocate_device().
>
> > + isa->input->close = isa1200_vibrator_close;
> > +
> > + input_set_drvdata(isa->input, isa);
> > +
> > + /* TODO: this hardware can likely support more than rumble */
> > + input_set_capability(isa->input, EV_FF, FF_RUMBLE);
> > +
> > + ret = input_ff_create_memless(isa->input, NULL,
> > + isa1200_vibrator_play_effect);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "couldn't create FF dev\n");
>
> "failed ..."
>
> > +
> > + ret = input_register_device(isa->input);
> > + if (ret)
> > + return dev_err_probe(dev, ret, "couldn't register input dev\n");
>
> "failed ..."
>
> > +
> > + return ret;
>
> return 0;
>
> > +}
> > +
> > +static int isa1200_suspend(struct device *dev)
> > +{
> > + struct isa1200 *isa = dev_get_drvdata(dev);
> > +
> > + cancel_work_sync(&isa->play_work);
>
> Move it under input_device_enabled().
>
> > +
> > + guard(mutex)(&isa->input->mutex);
> > +
Should I remove mutex locking from both PM functions?
> > + if (input_device_enabled(isa->input))
> > + if (isa->level)
> > + isa1200_stop(isa);
> > +
> > + return 0;
> > +}
> > +
> > +static int isa1200_resume(struct device *dev)
> > +{
> > + struct isa1200 *isa = dev_get_drvdata(dev);
> > +
> > + guard(mutex)(&isa->input->mutex);
> > +
> > + if (input_device_enabled(isa->input))
> > + if (isa->level)
> > + isa1200_start(isa);
> > +
> > + return 0;
> > +}
> > +
> > +static DEFINE_SIMPLE_DEV_PM_OPS(isa1200_pm_ops, isa1200_suspend, isa1200_resume);
> > +
> > +static const struct of_device_id isa1200_of_match[] = {
> > + { .compatible = "imagis,isa1200" },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, isa1200_of_match);
> > +
> > +static struct i2c_driver isa1200_i2c_driver = {
> > + .driver = {
> > + .name = "isa1200",
> > + .of_match_table = isa1200_of_match,
> > + .pm = pm_sleep_ptr(&isa1200_pm_ops),
> > + },
> > + .probe = isa1200_probe,
> > +};
> > +module_i2c_driver(isa1200_i2c_driver);
> > +
> > +MODULE_AUTHOR("Linus Walleij <linusw@kernel.org>");
> > +MODULE_AUTHOR("Svyatoslav Ryhel <clamor95@gmail.com>");
> > +MODULE_DESCRIPTION("Imagis ISA1200 haptic feedback unit");
> > +MODULE_LICENSE("GPL");
>
> Thanks.
>
> --
> Dmitry
^ permalink raw reply
* [PATCH RFC 0/4] Add regulator support to gpio-keys
From: Griffin Kroah-Hartman @ 2026-05-08 12:53 UTC (permalink / raw)
To: Dmitry Torokhov, Liam Girdwood, Mark Brown, Bjorn Andersson,
Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Luca Weiss
Cc: linux-input, linux-kernel, linux-arm-msm, devicetree,
Griffin Kroah-Hartman
This patchset adds regulator support to gpio-keys to ensure that the
regulator powering the Hall Effect sensor IC ("flip cover sensor") is on
when the input device is used.
Marked as RFC because we may want to represent a Hall Effect sensor with
a separate compatible + driver, and not use gpio-keys.
There was also a comment around the usage of of_regulator_get() in the
follow thread:
https://lore.kernel.org/all/DI5HOWHCCKKD.1SQFAA3L4QFDI@fairphone.com/
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
---
Griffin Kroah-Hartman (4):
regulator: add devm_fwnode family of functions
dt-bindings: input: gpio-keys: Add vdd-supply
Input: gpio-keys - add regulator to gpio_keys
arm64: dts: qcom: milos-fairphone-fp6: add supply for Hall Effect sensor
.../devicetree/bindings/input/gpio-keys.yaml | 4 ++
arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 4 +-
drivers/input/keyboard/gpio_keys.c | 41 ++++++++++++++
drivers/regulator/devres.c | 66 ++++++++++++++++++++++
include/linux/gpio_keys.h | 2 +
include/linux/regulator/consumer.h | 30 ++++++++++
6 files changed, 144 insertions(+), 3 deletions(-)
---
base-commit: 17c7841d09ee7d33557fd075562d9289b6018c90
change-id: 20260410-gpiokeys-vdd-supply-855d6ca8534b
Best regards,
--
Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
^ permalink raw reply
* [PATCH RFC 1/4] regulator: add devm_fwnode family of functions
From: Griffin Kroah-Hartman @ 2026-05-08 12:53 UTC (permalink / raw)
To: Dmitry Torokhov, Liam Girdwood, Mark Brown, Bjorn Andersson,
Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Luca Weiss
Cc: linux-input, linux-kernel, linux-arm-msm, devicetree,
Griffin Kroah-Hartman
In-Reply-To: <20260508-gpiokeys-vdd-supply-v1-0-0bb32e8e6428@fairphone.com>
Add devm_fwnode_regulator_get and variants.
These function wrappers allow regulators to be accessed from the fwnode
struct without any casts.
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
---
drivers/regulator/devres.c | 66 ++++++++++++++++++++++++++++++++++++++
include/linux/regulator/consumer.h | 30 +++++++++++++++++
2 files changed, 96 insertions(+)
diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c
index 615deba5d22c8ce190c69081c94651d8df93d002..f525b1f48bcf18593798f6fa520ccdfc656f6b6c 100644
--- a/drivers/regulator/devres.c
+++ b/drivers/regulator/devres.c
@@ -11,6 +11,7 @@
#include <linux/regulator/consumer.h>
#include <linux/regulator/driver.h>
#include <linux/module.h>
+#include <linux/of.h>
#include "internal.h"
@@ -803,4 +804,69 @@ struct regulator *devm_of_regulator_get_optional(struct device *dev, struct devi
return _devm_of_regulator_get(dev, node, id, OPTIONAL_GET);
}
EXPORT_SYMBOL_GPL(devm_of_regulator_get_optional);
+
+static struct regulator *_devm_fwnode_regulator_get(struct device *dev,
+ struct fwnode_handle *fwnode,
+ const char *id,
+ enum regulator_get_type get_type)
+{
+ if (is_of_node(fwnode))
+ return _devm_of_regulator_get(dev, to_of_node(fwnode), id, get_type);
+
+ return ERR_PTR(-ENODEV);
+}
+
+/**
+ * devm_fwnode_regulator_get() - get resource managed regulator from firmware node
+ * @dev: device to supply
+ * @fwnode: firmware node to get regulator from
+ * @id: supply name or regulator ID.
+ *
+ * Managed of_regulator_get(). Regulators returned from this
+ * function are automatically regulator_put() on driver detach. See
+ * of_regulator_get() for more information.
+ */
+struct regulator *devm_fwnode_regulator_get(struct device *dev,
+ struct fwnode_handle *fwnode,
+ const char *id)
+{
+ return _devm_fwnode_regulator_get(dev, fwnode, id, NORMAL_GET);
+}
+EXPORT_SYMBOL_GPL(devm_fwnode_regulator_get);
+
+/**
+ * devm_fwnode_regulator_get_exclusive() - get resource managed regulator from firmware node
+ * @dev: device to supply
+ * @fwnode: firmware node to get regulator from
+ * @id: supply name or regulator ID.
+ *
+ * Managed of_regulator_get_exclusive(). Regulators returned from this
+ * function are automatically regulator_put() on driver detach. See
+ * of_regulator_get_exclusive() for more information.
+ */
+struct regulator *devm_fwnode_regulator_get_exclusive(struct device *dev,
+ struct fwnode_handle *fwnode,
+ const char *id)
+{
+ return _devm_fwnode_regulator_get(dev, fwnode, id, EXCLUSIVE_GET);
+}
+EXPORT_SYMBOL_GPL(devm_fwnode_regulator_get_exclusive);
+
+/**
+ * devm_fwnode_regulator_get_optional() - get resource managed regulator from firmware node
+ * @dev: device to supply
+ * @fwnode: firmware node to get regulator from
+ * @id: supply name or regulator ID.
+ *
+ * Managed of_regulator_get_optional(). Regulators returned from this
+ * function are automatically regulator_put() on driver detach. See
+ * of_regulator_get_optional() for more information.
+ */
+struct regulator *devm_fwnode_regulator_get_optional(struct device *dev,
+ struct fwnode_handle *fwnode,
+ const char *id)
+{
+ return _devm_fwnode_regulator_get(dev, fwnode, id, OPTIONAL_GET);
+}
+EXPORT_SYMBOL_GPL(devm_fwnode_regulator_get_optional);
#endif
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 56fe2693d9b2284d04ebae50165f9aa7b1b3fee4..7c3aedf7f4902c4e3e8e2f5ecf6e4323b77658f3 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -691,6 +691,15 @@ struct regulator *__must_check devm_of_regulator_get_optional(struct device *dev
const char *id);
int __must_check of_regulator_bulk_get_all(struct device *dev, struct device_node *np,
struct regulator_bulk_data **consumers);
+struct regulator *__must_check devm_fwnode_regulator_get(struct device *dev,
+ struct fwnode_handle *fwnode,
+ const char *id);
+struct regulator *__must_check devm_fwnode_regulator_get_exclusive(struct device *dev,
+ struct fwnode_handle *fwnode,
+ const char *id);
+struct regulator *__must_check devm_fwnode_regulator_get_optional(struct device *dev,
+ struct fwnode_handle *fwnode,
+ const char *id);
#else
static inline struct regulator *__must_check of_regulator_get_optional(struct device *dev,
struct device_node *node,
@@ -712,6 +721,27 @@ static inline int of_regulator_bulk_get_all(struct device *dev, struct device_no
return 0;
}
+static inline struct regulator *__must_check
+devm_fwnode_regulator_get(struct device *dev, struct fwnode_handle *fwnode,
+ const char *id)
+{
+ return NULL;
+}
+
+static inline struct regulator *__must_check
+devm_fwnode_regulator_get_exclusive(struct device *dev, struct fwnode_handle *fwnode,
+ const char *id)
+{
+ return NULL;
+}
+
+static inline struct regulator *__must_check
+devm_fwnode_regulator_get_optional(struct device *dev, struct fwnode_handle *fwnode,
+ const char *id)
+{
+ return NULL;
+}
+
#endif
static inline int regulator_set_voltage_triplet(struct regulator *regulator,
--
2.43.0
^ permalink raw reply related
* [PATCH RFC 2/4] dt-bindings: input: gpio-keys: Add vdd-supply
From: Griffin Kroah-Hartman @ 2026-05-08 12:53 UTC (permalink / raw)
To: Dmitry Torokhov, Liam Girdwood, Mark Brown, Bjorn Andersson,
Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Luca Weiss
Cc: linux-input, linux-kernel, linux-arm-msm, devicetree,
Griffin Kroah-Hartman
In-Reply-To: <20260508-gpiokeys-vdd-supply-v1-0-0bb32e8e6428@fairphone.com>
Allow the use of vdd-supply regulators for gpio-keys. For example, the
Fairphone Gen. 6 Hall effect sensor requires this functionality.
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
---
Documentation/devicetree/bindings/input/gpio-keys.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index cc78c2152921308fe0cad3e29ca78a5fad08f066..9c5ec1e7d0fc7ea236c161c7bd5a041aafdd07a1 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -102,6 +102,10 @@ patternProperties:
which can be disabled to suppress events from the button.
type: boolean
+ vdd-supply:
+ description:
+ Regulator that provides a VDD power supply.
+
required:
- linux,code
--
2.43.0
^ permalink raw reply related
* [PATCH RFC 3/4] Input: gpio-keys - add regulator to gpio_keys
From: Griffin Kroah-Hartman @ 2026-05-08 12:53 UTC (permalink / raw)
To: Dmitry Torokhov, Liam Girdwood, Mark Brown, Bjorn Andersson,
Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Luca Weiss
Cc: linux-input, linux-kernel, linux-arm-msm, devicetree,
Griffin Kroah-Hartman
In-Reply-To: <20260508-gpiokeys-vdd-supply-v1-0-0bb32e8e6428@fairphone.com>
Allow gpio-keys to have vdd power suppy through regulators.
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
---
drivers/input/keyboard/gpio_keys.c | 41 ++++++++++++++++++++++++++++++++++++++
include/linux/gpio_keys.h | 2 ++
2 files changed, 43 insertions(+)
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index e196174856796b391f14c31da9b2fee5ff742172..2199ce7455cfc763569e173d4d18da92507f38d3 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -28,6 +28,7 @@
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/spinlock.h>
+#include <linux/regulator/consumer.h>
#include <dt-bindings/input/gpio-keys.h>
struct gpio_button_data {
@@ -729,6 +730,7 @@ static int gpio_keys_open(struct input_dev *input)
struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
const struct gpio_keys_platform_data *pdata = ddata->pdata;
int error;
+ int i;
if (pdata->enable) {
error = pdata->enable(input->dev.parent);
@@ -736,19 +738,48 @@ static int gpio_keys_open(struct input_dev *input)
return error;
}
+ for (i = 0; i < pdata->nbuttons; i++) {
+ const struct gpio_keys_button *button = &pdata->buttons[i];
+
+ if (!button->regulator)
+ continue;
+ error = regulator_enable(button->regulator);
+ if (error)
+ goto reg_err;
+ }
+
/* Report current state of buttons that are connected to GPIOs */
gpio_keys_report_state(ddata);
return 0;
+
+reg_err:
+ for (--i; i >= 0; i--) {
+ const struct gpio_keys_button *button = &pdata->buttons[i];
+
+ if (!button->regulator)
+ continue;
+ regulator_disable(button->regulator);
+ }
+ return error;
}
static void gpio_keys_close(struct input_dev *input)
{
struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
const struct gpio_keys_platform_data *pdata = ddata->pdata;
+ int i;
if (pdata->disable)
pdata->disable(input->dev.parent);
+
+ for (i = 0; i < pdata->nbuttons; i++) {
+ const struct gpio_keys_button *button = &pdata->buttons[i];
+
+ if (!button->regulator)
+ continue;
+ regulator_disable(button->regulator);
+ }
}
/*
@@ -829,6 +860,16 @@ gpio_keys_get_devtree_pdata(struct device *dev)
&button->debounce_interval))
button->debounce_interval = 5;
+ if (fwnode_property_present(child, "vdd-supply")) {
+ button->regulator = devm_fwnode_regulator_get_optional(dev, child, "vdd");
+ if (IS_ERR(button->regulator)) {
+ if (PTR_ERR(button->regulator) != -ENODEV)
+ return dev_err_ptr_probe(dev, PTR_ERR(button->regulator),
+ "Failed to get regulator\n");
+ button->regulator = NULL;
+ }
+ }
+
button++;
}
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index 80fa930b04c6795eb7c6143a79655a6f918446eb..66e786ad7eba407dbea2545941f5b6e464a4f61c 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -3,6 +3,7 @@
#define _GPIO_KEYS_H
#include <linux/types.h>
+#include <linux/regulator/consumer.h>
struct device;
@@ -36,6 +37,7 @@ struct gpio_keys_button {
int value;
unsigned int irq;
unsigned int wakeirq;
+ struct regulator *regulator;
};
/**
--
2.43.0
^ permalink raw reply related
* [PATCH RFC 4/4] arm64: dts: qcom: milos-fairphone-fp6: add supply for Hall Effect sensor
From: Griffin Kroah-Hartman @ 2026-05-08 12:53 UTC (permalink / raw)
To: Dmitry Torokhov, Liam Girdwood, Mark Brown, Bjorn Andersson,
Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Luca Weiss
Cc: linux-input, linux-kernel, linux-arm-msm, devicetree,
Griffin Kroah-Hartman
In-Reply-To: <20260508-gpiokeys-vdd-supply-v1-0-0bb32e8e6428@fairphone.com>
Add vdd-supply for the Hall Effect sensor in gpio-keys so that power for
the sensor will be enabled when it's in use.
With this, we can drop the regulator-always-on for vreg_l10b.
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
---
arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
index c1899db46e714137d7849b3b043062fe8b05cc42..ae6900c3f75c64ea5b4feadf38df101abb43c1ea 100644
--- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
+++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
@@ -32,13 +32,13 @@ gpio-keys {
pinctrl-0 = <&volume_up_default>, <&hall_sensor_default>;
pinctrl-names = "default";
- /* Powered by the always-on vreg_l10b */
event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&tlmm 70 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
linux,can-disable;
+ vdd-supply = <&vreg_l10b>;
wakeup-source;
};
@@ -326,8 +326,6 @@ vreg_l10b: ldo10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- /* Hall sensor VDD */
- regulator-always-on;
};
vreg_l11b: ldo11 {
--
2.43.0
^ permalink raw reply related
* Re: [RFC PATCH] HID: mcp2221: bound I2C readback copies to the receive buffer
From: gregkh @ 2026-05-08 13:03 UTC (permalink / raw)
To: nsa@linux.do
Cc: gupt21@gmail.com, jikos@kernel.org, bentiss@kernel.org,
linux-input@vger.kernel.org
In-Reply-To: <KL1PR02MB6800676A9E8DCB6454F59B6DF73D2@KL1PR02MB6800.apcprd02.prod.outlook.com>
On Fri, May 08, 2026 at 12:45:44PM +0000, nsa@linux.do wrote:
> The MCP2221 I2C readback path copies data[3] bytes from the incoming HID
> report into mcp->rxbuf at mcp->rxbuf_idx:
>
> memcpy(&buf[mcp->rxbuf_idx], &data[4], data[3]);
>
> The current checks only reject a NULL rxbuf, a negative rxbuf_idx, and
> chunks larger than 60 bytes. They do not verify that the reported chunk
> still fits in the destination buffer for the current transaction.
>
> As a result, a device response can claim a chunk length that exceeds the
> remaining space in the caller-provided receive buffer. For example, a
> 1-byte read request may still return data[3] == 60, which would cause a
> write past the end of the target buffer in the unpatched code.
>
> Track the receive buffer length for the active transaction and reject
> MCP2221_I2C_GET_DATA responses whose chunk would exceed the remaining
> space.bang
>
> This seems security-relevant to me, similar in kind to CVE-2022-50131,
> although it affects a different path.
>
> I also validated this change on a Raspberry Pi system with an actual
> MCP2221 device attached, where the oversized readback chunks were rejected
> and the original out-of-bounds write path was no longer reached.
>
> I am primarily approaching this from the vulnerability research side, so I
> would appreciate maintainer review on the overall fix quality and whether
> this is the preferred way to address it.
>
> Signed-off-by: Lexpl0it<nsa@linux.do>bi
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
a patch that has triggered this response. He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created. Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.
You are receiving this message because of the following common error(s)
as indicated below:
- Your patch is malformed (tabs converted to spaces, linewrapped, etc.)
and can not be applied. Please read the file,
Documentation/process/email-clients.rst in order to fix this.
- It looks like you did not use your "real" name for the patch on either
the Signed-off-by: line, or the From: line (both of which have to
match). Please read the kernel file,
Documentation/process/submitting-patches.rst for how to do this
correctly.
If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.
thanks,
greg k-h's patch email bot
^ permalink raw reply
* Re: [PATCH RFC 1/4] regulator: add devm_fwnode family of functions
From: Mark Brown @ 2026-05-08 13:31 UTC (permalink / raw)
To: Griffin Kroah-Hartman
Cc: Dmitry Torokhov, Liam Girdwood, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Luca Weiss,
linux-input, linux-kernel, linux-arm-msm, devicetree
In-Reply-To: <20260508-gpiokeys-vdd-supply-v1-1-0bb32e8e6428@fairphone.com>
[-- Attachment #1: Type: text/plain, Size: 235 bytes --]
On Fri, May 08, 2026 at 02:53:13PM +0200, Griffin Kroah-Hartman wrote:
> Add devm_fwnode_regulator_get and variants.
>
> These function wrappers allow regulators to be accessed from the fwnode
> struct without any casts.
Why?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* [PATCH] HID: pxrc: fix slab-out-of-bounds read/write in pxrc_raw_event()
From: Jinmo Yang @ 2026-05-08 13:33 UTC (permalink / raw)
To: marcus.folkesson, jikos, benjamin.tissoires
Cc: linux-input, linux-kernel, stable, Jinmo Yang
pxrc_raw_event() accesses data[7] without verifying that the buffer is
large enough. A device that sends a report shorter than 8 bytes causes
an out-of-bounds read (priv->dial = data[7]) and an out-of-bounds write
(data[7] = priv->dial) on the report buffer, corrupting adjacent slab
memory.
This can be triggered from userspace via /dev/uhid by creating a virtual
device with VID 0x1781 / PID 0x0898 and sending a short UHID_INPUT2
report.
Add a size check at the top of pxrc_raw_event() to bail out when the
report buffer is shorter than 8 bytes.
Fixes: a2dccedac664 ("HID: pxrc: new driver for PhoenixRC Flight Controller Adapter")
Cc: stable@vger.kernel.org
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
---
drivers/hid/hid-pxrc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/hid/hid-pxrc.c b/drivers/hid/hid-pxrc.c
index 07e20ff6018e..f2524547c7a1 100644
--- a/drivers/hid/hid-pxrc.c
+++ b/drivers/hid/hid-pxrc.c
@@ -53,6 +53,9 @@ static int pxrc_raw_event(struct hid_device *hdev, struct hid_report *report,
u8 *data, int size)
{
struct pxrc_priv *priv = hid_get_drvdata(hdev);
+
+ if (size < 8)
+ return 0;
if (priv->alternate)
priv->slider = data[7];
--
2.47.0
^ permalink raw reply related
* Re: [PATCH RFC 3/4] Input: gpio-keys - add regulator to gpio_keys
From: Mark Brown @ 2026-05-08 13:44 UTC (permalink / raw)
To: Griffin Kroah-Hartman
Cc: Dmitry Torokhov, Liam Girdwood, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Luca Weiss,
linux-input, linux-kernel, linux-arm-msm, devicetree
In-Reply-To: <20260508-gpiokeys-vdd-supply-v1-3-0bb32e8e6428@fairphone.com>
[-- Attachment #1: Type: text/plain, Size: 892 bytes --]
On Fri, May 08, 2026 at 02:53:15PM +0200, Griffin Kroah-Hartman wrote:
> + if (fwnode_property_present(child, "vdd-supply")) {
> + button->regulator = devm_fwnode_regulator_get_optional(dev, child, "vdd");
> + if (IS_ERR(button->regulator)) {
As well as the issue I mentioned on a prior thread with this assigning a
non-physical "vdd" name to the single supply that these components can
have (which has had issues in the past, AHCI being one of the more
painful) the fact that this is fwnode means that this opens up support
for using this with ACPI which is very problematic given that ACPI has a
strong model of how regulators should work which is that they should not
be OS visible at all. That probably needs more addressing in the prior
regulator patch, that needs a bit more motivation and discussion about
the issues with trying to do a regulator interface firmware neutrally.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* Re: [PATCH v4 2/2] Input: isa1200 - new driver for Imagis ISA1200
From: Dmitry Torokhov @ 2026-05-08 13:57 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij,
linux-input, devicetree, linux-kernel
In-Reply-To: <CAPVz0n1wYMsLLzbQ=4HLT1+Cx8GoxY+n9Q0cJ=dYv9bF=piOVg@mail.gmail.com>
On Fri, May 08, 2026 at 02:13:43PM +0300, Svyatoslav Ryhel wrote:
> чт, 7 трав. 2026 р. о 22:26 Dmitry Torokhov <dmitry.torokhov@gmail.com> пише:
> >
> > Hi Svyatoslav,
> >
> > On Thu, May 07, 2026 at 04:39:48PM +0300, Svyatoslav Ryhel wrote:
...
> > > +}
> > > +
> > > +static int isa1200_suspend(struct device *dev)
> > > +{
> > > + struct isa1200 *isa = dev_get_drvdata(dev);
> > > +
> > > + cancel_work_sync(&isa->play_work);
> >
> > Move it under input_device_enabled().
> >
> > > +
> > > + guard(mutex)(&isa->input->mutex);
> > > +
>
> Should I remove mutex locking from both PM functions?
No, you should remove it from isa1200_play_work().
Thanks.
--
Dmitry
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox