[PATCH 1/1] ima_setup.sh: Use tst_umount()

[PATCH 1/1] ima_setup.sh: Use tst_umount()

[Petr Vorel]

Use standard test mechanism to detect problems during umount() caused by
GNOME's gvfsd-trash daemon. Although it will not solve the problem it at
least warn tester.

Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
 testcases/kernel/security/integrity/ima/tests/ima_setup.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
index 19f00532b1..054ab28611 100644
--- a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
@@ -313,7 +313,7 @@ ima_cleanup()
 	[ -n "$TST_CLEANUP_CALLER" ] && $TST_CLEANUP_CALLER
 
 	for dir in $UMOUNT; do
-		umount $dir
+		tst_umount $dir
 	done
 
 	if [ "$IMA_POLICY_LOADED" = 1 ]; then
-- 
2.55.0

Re: [LTP] [PATCH 1/1] ima_setup.sh: Use tst_umount()

[Andrea Cervesato]

Reviewed-by: Andrea Cervesato <andrea.cervesato@suse.com>

--
Andrea Cervesato
SUSE QE Automation Engineer Linux
andrea.cervesato@suse.com

Re: [PATCH 1/1] ima_setup.sh: Use tst_umount()

[Mimi Zohar]

Hi Petr,

On Thu, 2026-08-13 at 13:25 +0200, Petr Vorel wrote:
> Use standard test mechanism to detect problems during umount() caused by
> GNOME's gvfsd-trash daemon. Although it will not solve the problem it at
> least warn tester.
> 
> Reported-by: Mimi Zohar <zohar@linux.ibm.com>
> Signed-off-by: Petr Vorel <pvorel@suse.cz>

With this patch applied and after removing everything other than ima_violations
from /opt/ltp/runtest/ima, I'm still seeing:

ima_violations 1 TINFO: $TMPDIR is on tmpfs => run on loop device
ima_violations 1 TINFO: booted with IMA policy: tcb
ima_violations 1 TINFO: using log /var/log/audit/audit.log
ima_violations 1 TINFO: verify open writers violation
ima_violations 1 TPASS: 1 open_writers violation(s) added
ima_violations 2 TINFO: verify ToMToU violation
ima_violations 2 TPASS: 1 ToMToU violation(s) added
ima_violations 3 TINFO: verify open_writers using mmapped files
tst_kconfig.c:90: TINFO: Parsing kernel config '/lib/modules/7.1.5-
101.fc43.x86_64/build/.config'
ima_violations 3 TBROK: tst_checkpoint wait 10000 0 failed
umount: /tmp/LTP_ima_violations.1OEcI81NHB/mntpoint: target is busy.
ima_violations 3 TINFO: umount(/tmp/LTP_ima_violations.1OEcI81NHB/mntpoint)
failed, try 1 ...
ima_violations 3 TINFO: Likely gvfsd-trash is probing newly mounted  fs, kill it
to speed up tests.
umount: /tmp/LTP_ima_violations.1OEcI81NHB/mntpoint: target is busy.
ima_violations 3 TINFO: umount(/tmp/LTP_ima_violations.1OEcI81NHB/mntpoint)
failed, try 2 ...

The message keeps repeating ...

Mimi


> ---
>  testcases/kernel/security/integrity/ima/tests/ima_setup.sh | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
> index 19f00532b1..054ab28611 100644
> --- a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
> +++ b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
> @@ -313,7 +313,7 @@ ima_cleanup()
>  	[ -n "$TST_CLEANUP_CALLER" ] && $TST_CLEANUP_CALLER
>  
>  	for dir in $UMOUNT; do
> -		umount $dir
> +		tst_umount $dir
>  	done
>  
>  	if [ "$IMA_POLICY_LOADED" = 1 ]; then

Re: [PATCH 1/1] ima_setup.sh: Use tst_umount()

[Petr Vorel]

Hi Mimi,

> Hi Petr,

> On Thu, 2026-08-13 at 13:25 +0200, Petr Vorel wrote:
> > Use standard test mechanism to detect problems during umount() caused by
> > GNOME's gvfsd-trash daemon. Although it will not solve the problem it at
> > least warn tester.

> > Reported-by: Mimi Zohar <zohar@linux.ibm.com>
> > Signed-off-by: Petr Vorel <pvorel@suse.cz>

> With this patch applied and after removing everything other than ima_violations
> from /opt/ltp/runtest/ima, I'm still seeing:

> ima_violations 1 TINFO: $TMPDIR is on tmpfs => run on loop device
> ima_violations 1 TINFO: booted with IMA policy: tcb
> ima_violations 1 TINFO: using log /var/log/audit/audit.log
> ima_violations 1 TINFO: verify open writers violation
> ima_violations 1 TPASS: 1 open_writers violation(s) added
> ima_violations 2 TINFO: verify ToMToU violation
> ima_violations 2 TPASS: 1 ToMToU violation(s) added
> ima_violations 3 TINFO: verify open_writers using mmapped files
> tst_kconfig.c:90: TINFO: Parsing kernel config '/lib/modules/7.1.5-
> 101.fc43.x86_64/build/.config'
> ima_violations 3 TBROK: tst_checkpoint wait 10000 0 failed
> umount: /tmp/LTP_ima_violations.1OEcI81NHB/mntpoint: target is busy.
> ima_violations 3 TINFO: umount(/tmp/LTP_ima_violations.1OEcI81NHB/mntpoint)
> failed, try 1 ...
> ima_violations 3 TINFO: Likely gvfsd-trash is probing newly mounted  fs, kill it
> to speed up tests.
> umount: /tmp/LTP_ima_violations.1OEcI81NHB/mntpoint: target is busy.
> ima_violations 3 TINFO: umount(/tmp/LTP_ima_violations.1OEcI81NHB/mntpoint)
> failed, try 2 ...

I wonder if the process on your machine is gvfsd-trash or something else.
Unfortunately what we can do is probably just an advice to user, killing any
userspace process is probably too aggressive. So the current isn't really a
workaround just kind of a hint.

> The message keeps repeating ...

Yeah, I wonder if trying 50x makes even sense, IMHO 5x would be enough.

FYI the current code in tst_test.sh:

tst_umount()
{
	local mntpoint="${1:-$TST_MNTPOINT}"
	local i=0

	[ -z "$mntpoint" ] && return

	if ! echo "$mntpoint" | grep -q ^/; then
		tst_brk TCONF "The '$mntpoint' is not an absolute path"
	fi

	if ! grep -q "${mntpoint%/}" /proc/mounts; then
		tst_res TINFO "The '$mntpoint' is not mounted, skipping umount"
		return
	fi

	while [ "$i" -lt 50 ]; do
		if umount "$mntpoint" > /dev/null; then
			return
		fi

		i=$((i+1))

		tst_res TINFO "umount($mntpoint) failed, try $i ..."
		tst_res TINFO "Likely gvfsd-trash is probing newly mounted "\
		              "fs, kill it to speed up tests."

		tst_sleep 100ms
	done

	tst_res TWARN "Failed to umount($mntpoint) after 50 retries"
}

Kind regards,
Petr

> Mimi


> > ---
> >  testcases/kernel/security/integrity/ima/tests/ima_setup.sh | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)

> > diff --git a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
> > index 19f00532b1..054ab28611 100644
> > --- a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
> > +++ b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
> > @@ -313,7 +313,7 @@ ima_cleanup()
> >  	[ -n "$TST_CLEANUP_CALLER" ] && $TST_CLEANUP_CALLER

> >  	for dir in $UMOUNT; do
> > -		umount $dir
> > +		tst_umount $dir
> >  	done

> >  	if [ "$IMA_POLICY_LOADED" = 1 ]; then