Linux Integrity Measurement development
 help / color / mirror / Atom feed
* [PATCH 1/1] tpm_tis_spi: add reset handling for SLM/SLB9670
@ 2026-11-18 15:10 Henri Roosen
  2026-11-18 15:31 ` Jarkko Sakkinen
  0 siblings, 1 reply; 2+ messages in thread
From: Henri Roosen @ 2026-11-18 15:10 UTC (permalink / raw)
  To: peterhuewe, jarkko
  Cc: jgg, linux-integrity, linux-kernel, Martin.Kepplinger-Novakovic,
	Henri Roosen

On an i.MX8MP board, the SLM9670 could not always be successfully
probed at boot time. The first call to tpm_tis_read32() returned with
timeout.

This turned out to be related to no reset-line handling of the chip.
Although a reset-gpio was provided in the dts, the tpm_tis_spi driver
didn't use it.

This patch implements reset-line handling for SLM/SLB9670 when a
reset-line is provided and uses the timings from the datasheet [1].

Tested with SLM9670.

[1] https://www.infineon.com/assets/row/public/documents/30/49/infineon-slb-9670vq2.0-datasheet-en.pdf

Signed-off-by: Henri Roosen <henri.roosen@ginzinger.com>
---
 drivers/char/tpm/tpm_tis_spi_main.c | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_spi_main.c b/drivers/char/tpm/tpm_tis_spi_main.c
index 61b42c83ced8..8ed9344041c1 100644
--- a/drivers/char/tpm/tpm_tis_spi_main.c
+++ b/drivers/char/tpm/tpm_tis_spi_main.c
@@ -22,6 +22,8 @@
 
 #include <linux/acpi.h>
 #include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -39,6 +41,10 @@
 #define MAX_SPI_FRAMESIZE 64
 #define SPI_HDRSIZE 4
 
+/* Timings from the SLB9670/SLM9670 datasheets */
+#define SLB9670_RESET_ASSERT_US 2
+#define SLB9670_RESET_READY_MS 60
+
 /*
  * TCG SPI flow control is documented in section 6.4 of the spec[1]. In short,
  * keep trying to read from the device until MISO goes high indicating the
@@ -287,6 +293,24 @@ static int tpm_tis_spi_probe(struct spi_device *dev)
 	return tpm_tis_spi_init(dev, phy, irq, &tpm_spi_phy_ops);
 }
 
+static int slb9670_spi_probe(struct spi_device *spi)
+{
+	struct gpio_desc *reset;
+
+	reset = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(reset))
+		return dev_err_probe(&spi->dev, PTR_ERR(reset),
+				     "failed to get reset GPIO\n");
+	if (reset) {
+		fsleep(SLB9670_RESET_ASSERT_US);
+		gpiod_set_value_cansleep(reset, 0);
+		msleep(SLB9670_RESET_READY_MS);
+	}
+
+	/* call generic probe function */
+	return tpm_tis_spi_probe(spi);
+}
+
 typedef int (*tpm_tis_spi_probe_func)(struct spi_device *);
 
 static int tpm_tis_spi_driver_probe(struct spi_device *spi)
@@ -320,7 +344,7 @@ static void tpm_tis_spi_remove(struct spi_device *dev)
 static const struct spi_device_id tpm_tis_spi_id[] = {
 	{ "attpm20p", (unsigned long)tpm_tis_spi_probe },
 	{ "st33htpm-spi", (unsigned long)tpm_tis_spi_probe },
-	{ "slb9670", (unsigned long)tpm_tis_spi_probe },
+	{ "slb9670", (unsigned long)slb9670_spi_probe },
 	{ "tpm_tis_spi", (unsigned long)tpm_tis_spi_probe },
 	{ "tpm_tis-spi", (unsigned long)tpm_tis_spi_probe },
 	{ "cr50", (unsigned long)cr50_spi_probe },
@@ -331,7 +355,7 @@ MODULE_DEVICE_TABLE(spi, tpm_tis_spi_id);
 static const struct of_device_id of_tis_spi_match[] __maybe_unused = {
 	{ .compatible = "atmel,attpm20p", .data = tpm_tis_spi_probe },
 	{ .compatible = "st,st33htpm-spi", .data = tpm_tis_spi_probe },
-	{ .compatible = "infineon,slb9670", .data = tpm_tis_spi_probe },
+	{ .compatible = "infineon,slb9670", .data = slb9670_spi_probe },
 	{ .compatible = "tcg,tpm_tis-spi", .data = tpm_tis_spi_probe },
 	{ .compatible = "google,cr50", .data = cr50_spi_probe },
 	{}
-- 
2.47.3


^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2026-11-18 15:31 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-18 15:10 [PATCH 1/1] tpm_tis_spi: add reset handling for SLM/SLB9670 Henri Roosen
2026-11-18 15:31 ` Jarkko Sakkinen

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox