[PATCH] iommu/amd: Track when amd_iommu_v2 init is complete

[PATCH] iommu/amd: Track when amd_iommu_v2 init is complete

[Oded Gabbay]

This patch adds a new exported function to amd_iommu_v2, which returns 1 if the
amd_iommu_v2 initialization function has completed, and 0 otherwise.

This is necessary for the case when amd_iommu_v2 is compiled inside the kernel
image (not as module) and another module (e.g. amdkfd), which is also compiled
inside the kernel image, is dependent on amd_iommu_v2 functionality.

In that case, there is no mechanism in the kernel that enforces the order of
loading between the two modules. Therefore, If the amd_iommu_v2 is loaded
_after_ the other module, and the other module calls one of
amd_iommu_v2 exported functions _before_ amd_iommu_v2 is loaded, than that
function will fail, and as a result, the calling module may fail as well.

Note that when the two modules are compiled as modules, this situation can't
occur as the kernel enforces the order of loading.

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
---
 drivers/iommu/amd_iommu_v2.c | 11 +++++++++++
 include/linux/amd-iommu.h    |  2 ++
 2 files changed, 13 insertions(+)

diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c
index 1e6360e..2456f18 100644
--- a/drivers/iommu/amd_iommu_v2.c
+++ b/drivers/iommu/amd_iommu_v2.c
@@ -895,6 +895,14 @@ out_unlock:
 }
 EXPORT_SYMBOL(amd_iommu_set_invalidate_ctx_cb);
 
+static int iommu_v2_init_completed;
+
+int amd_iommu_v2_is_init_completed(void)
+{
+	return iommu_v2_init_completed;
+}
+EXPORT_SYMBOL(amd_iommu_v2_is_init_completed);
+
 static int __init amd_iommu_v2_init(void)
 {
 	int ret;
@@ -903,6 +911,7 @@ static int __init amd_iommu_v2_init(void)
 
 	if (!amd_iommu_v2_supported()) {
 		pr_info("AMD IOMMUv2 functionality not available on this system\n");
+		iommu_v2_init_completed = 1;
 		/*
 		 * Load anyway to provide the symbols to other modules
 		 * which may use AMD IOMMUv2 optionally.
@@ -919,6 +928,8 @@ static int __init amd_iommu_v2_init(void)
 
 	amd_iommu_register_ppr_notifier(&ppr_nb);
 
+	iommu_v2_init_completed = 1;
+
 	return 0;
 
 out:
diff --git a/include/linux/amd-iommu.h b/include/linux/amd-iommu.h
index 2b08e79..115c03a 100644
--- a/include/linux/amd-iommu.h
+++ b/include/linux/amd-iommu.h
@@ -169,6 +169,8 @@ typedef void (*amd_iommu_invalidate_ctx)(struct pci_dev *pdev, int pasid);
 extern int amd_iommu_set_invalidate_ctx_cb(struct pci_dev *pdev,
 					   amd_iommu_invalidate_ctx cb);
 
+extern int amd_iommu_v2_is_init_completed(void);
+
 #else
 
 static inline int amd_iommu_detect(void) { return -ENODEV; }
-- 
2.1.0

Re: [PATCH] iommu/amd: Track when amd_iommu_v2 init is complete

[Oded Gabbay]

On 12/20/2014 10:12 PM, Oded Gabbay wrote:
> This patch adds a new exported function to amd_iommu_v2, which returns 1 if the
> amd_iommu_v2 initialization function has completed, and 0 otherwise.
> 
> This is necessary for the case when amd_iommu_v2 is compiled inside the kernel
> image (not as module) and another module (e.g. amdkfd), which is also compiled
> inside the kernel image, is dependent on amd_iommu_v2 functionality.
> 
> In that case, there is no mechanism in the kernel that enforces the order of
> loading between the two modules. Therefore, If the amd_iommu_v2 is loaded
> _after_ the other module, and the other module calls one of
> amd_iommu_v2 exported functions _before_ amd_iommu_v2 is loaded, than that
> function will fail, and as a result, the calling module may fail as well.
> 
> Note that when the two modules are compiled as modules, this situation can't
> occur as the kernel enforces the order of loading.
> 
> Signed-off-by: Oded Gabbay <oded.gabbay-5C7GfCeVMHo@public.gmane.org>
> ---
>  drivers/iommu/amd_iommu_v2.c | 11 +++++++++++
>  include/linux/amd-iommu.h    |  2 ++
>  2 files changed, 13 insertions(+)
> 
> diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c
> index 1e6360e..2456f18 100644
> --- a/drivers/iommu/amd_iommu_v2.c
> +++ b/drivers/iommu/amd_iommu_v2.c
> @@ -895,6 +895,14 @@ out_unlock:
>  }
>  EXPORT_SYMBOL(amd_iommu_set_invalidate_ctx_cb);
>  
> +static int iommu_v2_init_completed;
> +
> +int amd_iommu_v2_is_init_completed(void)
> +{
> +	return iommu_v2_init_completed;
> +}
> +EXPORT_SYMBOL(amd_iommu_v2_is_init_completed);
> +
>  static int __init amd_iommu_v2_init(void)
>  {
>  	int ret;
> @@ -903,6 +911,7 @@ static int __init amd_iommu_v2_init(void)
>  
>  	if (!amd_iommu_v2_supported()) {
>  		pr_info("AMD IOMMUv2 functionality not available on this system\n");
> +		iommu_v2_init_completed = 1;
>  		/*
>  		 * Load anyway to provide the symbols to other modules
>  		 * which may use AMD IOMMUv2 optionally.
> @@ -919,6 +928,8 @@ static int __init amd_iommu_v2_init(void)
>  
>  	amd_iommu_register_ppr_notifier(&ppr_nb);
>  
> +	iommu_v2_init_completed = 1;
> +
>  	return 0;
>  
>  out:
> diff --git a/include/linux/amd-iommu.h b/include/linux/amd-iommu.h
> index 2b08e79..115c03a 100644
> --- a/include/linux/amd-iommu.h
> +++ b/include/linux/amd-iommu.h
> @@ -169,6 +169,8 @@ typedef void (*amd_iommu_invalidate_ctx)(struct pci_dev *pdev, int pasid);
>  extern int amd_iommu_set_invalidate_ctx_cb(struct pci_dev *pdev,
>  					   amd_iommu_invalidate_ctx cb);
>  
> +extern int amd_iommu_v2_is_init_completed(void);
> +
>  #else
>  
>  static inline int amd_iommu_detect(void) { return -ENODEV; }
> 

Hi Joerg,
This patch follows our IRC conversations from the last week.
Last update from me was that using subsys_initcall instead of module_init
does enforce amd_iommu_v2 to load _before_ amdkfd (apparently I didn't check
it correctly the first time). However, this won't help us because:
1. I don't know what effect this has when amd_iommu_v2 is compiled as module.
2. amd_iommu_v2 depends on amd_iommu which is not subsys, so amd_iommu_v2
init function fails when it is called this early, and thus, amd_iommu_v2
doesn't work.

I want to fix this situation in rc1/2, so I'm sending the complementary
patches to dri-devel in the meantime.

	Oded

Re: [PATCH] iommu/amd: Track when amd_iommu_v2 init is complete

[Oded Gabbay]

On 12/20/2014 10:27 PM, Oded Gabbay wrote:
>
>
> On 12/20/2014 10:12 PM, Oded Gabbay wrote:
>> This patch adds a new exported function to amd_iommu_v2, which returns 1 if the
>> amd_iommu_v2 initialization function has completed, and 0 otherwise.
>>
>> This is necessary for the case when amd_iommu_v2 is compiled inside the kernel
>> image (not as module) and another module (e.g. amdkfd), which is also compiled
>> inside the kernel image, is dependent on amd_iommu_v2 functionality.
>>
>> In that case, there is no mechanism in the kernel that enforces the order of
>> loading between the two modules. Therefore, If the amd_iommu_v2 is loaded
>> _after_ the other module, and the other module calls one of
>> amd_iommu_v2 exported functions _before_ amd_iommu_v2 is loaded, than that
>> function will fail, and as a result, the calling module may fail as well.
>>
>> Note that when the two modules are compiled as modules, this situation can't
>> occur as the kernel enforces the order of loading.
>>
>> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
>> ---
>>   drivers/iommu/amd_iommu_v2.c | 11 +++++++++++
>>   include/linux/amd-iommu.h    |  2 ++
>>   2 files changed, 13 insertions(+)
>>
>> diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c
>> index 1e6360e..2456f18 100644
>> --- a/drivers/iommu/amd_iommu_v2.c
>> +++ b/drivers/iommu/amd_iommu_v2.c
>> @@ -895,6 +895,14 @@ out_unlock:
>>   }
>>   EXPORT_SYMBOL(amd_iommu_set_invalidate_ctx_cb);
>>
>> +static int iommu_v2_init_completed;
>> +
>> +int amd_iommu_v2_is_init_completed(void)
>> +{
>> +	return iommu_v2_init_completed;
>> +}
>> +EXPORT_SYMBOL(amd_iommu_v2_is_init_completed);
>> +
>>   static int __init amd_iommu_v2_init(void)
>>   {
>>   	int ret;
>> @@ -903,6 +911,7 @@ static int __init amd_iommu_v2_init(void)
>>
>>   	if (!amd_iommu_v2_supported()) {
>>   		pr_info("AMD IOMMUv2 functionality not available on this system\n");
>> +		iommu_v2_init_completed = 1;
>>   		/*
>>   		 * Load anyway to provide the symbols to other modules
>>   		 * which may use AMD IOMMUv2 optionally.
>> @@ -919,6 +928,8 @@ static int __init amd_iommu_v2_init(void)
>>
>>   	amd_iommu_register_ppr_notifier(&ppr_nb);
>>
>> +	iommu_v2_init_completed = 1;
>> +
>>   	return 0;
>>
>>   out:
>> diff --git a/include/linux/amd-iommu.h b/include/linux/amd-iommu.h
>> index 2b08e79..115c03a 100644
>> --- a/include/linux/amd-iommu.h
>> +++ b/include/linux/amd-iommu.h
>> @@ -169,6 +169,8 @@ typedef void (*amd_iommu_invalidate_ctx)(struct pci_dev *pdev, int pasid);
>>   extern int amd_iommu_set_invalidate_ctx_cb(struct pci_dev *pdev,
>>   					   amd_iommu_invalidate_ctx cb);
>>
>> +extern int amd_iommu_v2_is_init_completed(void);
>> +
>>   #else
>>
>>   static inline int amd_iommu_detect(void) { return -ENODEV; }
>>
>
> Hi Joerg,
> This patch follows our IRC conversations from the last week.
> Last update from me was that using subsys_initcall instead of module_init
> does enforce amd_iommu_v2 to load _before_ amdkfd (apparently I didn't check
> it correctly the first time). However, this won't help us because:
> 1. I don't know what effect this has when amd_iommu_v2 is compiled as module.
> 2. amd_iommu_v2 depends on amd_iommu which is not subsys, so amd_iommu_v2
> init function fails when it is called this early, and thus, amd_iommu_v2
> doesn't work.
>
> I want to fix this situation in rc1/2, so I'm sending the complementary
> patches to dri-devel in the meantime.
>
> 	Oded
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
>

Hi,
The drm guys suggested we move iommu/ subsystem before gpu/ subsystem in 
drivers/Makefile instead of the above patch (and the complementing patch-set in 
amdkfd).

I did that and it works, so please see this patch as discarded for now.
I will send a new patch-set shortly.

	ODed

Re: [PATCH] iommu/amd: Track when amd_iommu_v2 init is complete

[Joerg Roedel]

Hi Oded,

On Mon, Dec 22, 2014 at 12:23:44PM +0200, Oded Gabbay wrote:
> The drm guys suggested we move iommu/ subsystem before gpu/
> subsystem in drivers/Makefile instead of the above patch (and the
> complementing patch-set in amdkfd).
> I did that and it works, so please see this patch as discarded for now.
> I will send a new patch-set shortly.

Yeah, this is still a hack, but a better solution than tracking the
initialization order manually.


	Joerg