From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Joerg Roedel <joro@8bytes.org>,
David Woodhouse <dwmw2@infradead.org>,
Eric Auger <eric.auger@redhat.com>,
Alex Williamson <alex.williamson@redhat.com>,
Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>,
Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v4 04/22] iommu: Add recoverable fault reporting
Date: Sun, 9 Jun 2019 06:44:04 -0700 [thread overview]
Message-ID: <1560087862-57608-5-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1560087862-57608-1-git-send-email-jacob.jun.pan@linux.intel.com>
From: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Some IOMMU hardware features, for example PCI's PRI and Arm SMMU's Stall,
enable recoverable I/O page faults. Allow IOMMU drivers to report PRI Page
Requests and Stall events through the new fault reporting API. The
consumer of the fault can be either an I/O page fault handler in the host,
or a guest OS.
Once handled, the fault must be completed by sending a page response back
to the IOMMU. Add an iommu_page_response() function to complete a page
fault.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
---
drivers/iommu/iommu.c | 77 ++++++++++++++++++++++++++++++++++++++++++++++++++-
include/linux/iommu.h | 51 ++++++++++++++++++++++++++++++++++
2 files changed, 127 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 7955184..13b301c 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -869,7 +869,14 @@ EXPORT_SYMBOL_GPL(iommu_group_unregister_notifier);
* @data: private data passed as argument to the handler
*
* When an IOMMU fault event is received, this handler gets called with the
- * fault event and data as argument.
+ * fault event and data as argument. The handler should return 0 on success. If
+ * the fault is recoverable (IOMMU_FAULT_PAGE_REQ), the handler should also
+ * complete the fault by calling iommu_page_response() with one of the following
+ * response code:
+ * - IOMMU_PAGE_RESP_SUCCESS: retry the translation
+ * - IOMMU_PAGE_RESP_INVALID: terminate the fault
+ * - IOMMU_PAGE_RESP_FAILURE: terminate the fault and stop reporting
+ * page faults if possible.
*
* Return 0 if the fault handler was installed successfully, or an error.
*/
@@ -904,6 +911,8 @@ int iommu_register_device_fault_handler(struct device *dev,
}
param->fault_param->handler = handler;
param->fault_param->data = data;
+ mutex_init(¶m->fault_param->lock);
+ INIT_LIST_HEAD(¶m->fault_param->faults);
done_unlock:
mutex_unlock(¶m->lock);
@@ -934,6 +943,12 @@ int iommu_unregister_device_fault_handler(struct device *dev)
if (!param->fault_param)
goto unlock;
+ /* we cannot unregister handler if there are pending faults */
+ if (!list_empty(¶m->fault_param->faults)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
kfree(param->fault_param);
param->fault_param = NULL;
put_device(dev);
@@ -958,6 +973,7 @@ EXPORT_SYMBOL_GPL(iommu_unregister_device_fault_handler);
int iommu_report_device_fault(struct device *dev, struct iommu_fault_event *evt)
{
struct iommu_param *param = dev->iommu_param;
+ struct iommu_fault_event *evt_pending;
struct iommu_fault_param *fparam;
int ret = 0;
@@ -972,6 +988,20 @@ int iommu_report_device_fault(struct device *dev, struct iommu_fault_event *evt)
ret = -EINVAL;
goto done_unlock;
}
+
+ if (evt->fault.type == IOMMU_FAULT_PAGE_REQ &&
+ (evt->fault.prm.flags & IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE)) {
+ evt_pending = kmemdup(evt, sizeof(struct iommu_fault_event),
+ GFP_KERNEL);
+ if (!evt_pending) {
+ ret = -ENOMEM;
+ goto done_unlock;
+ }
+ mutex_lock(&fparam->lock);
+ list_add_tail(&evt_pending->list, &fparam->faults);
+ mutex_unlock(&fparam->lock);
+ }
+
ret = fparam->handler(evt, fparam->data);
done_unlock:
mutex_unlock(¶m->lock);
@@ -1513,6 +1543,51 @@ int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
}
EXPORT_SYMBOL_GPL(iommu_attach_device);
+int iommu_page_response(struct device *dev,
+ struct page_response_msg *msg)
+{
+ struct iommu_param *param = dev->iommu_param;
+ int ret = -EINVAL;
+ struct iommu_fault_event *evt;
+ struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
+
+ if (!domain || !domain->ops->page_response)
+ return -ENODEV;
+
+ /*
+ * Device iommu_param should have been allocated when device is
+ * added to its iommu_group.
+ */
+ if (!param || !param->fault_param)
+ return -EINVAL;
+
+ /* Only send response if there is a fault report pending */
+ mutex_lock(¶m->fault_param->lock);
+ if (list_empty(¶m->fault_param->faults)) {
+ pr_warn("no pending PRQ, drop response\n");
+ goto done_unlock;
+ }
+ /*
+ * Check if we have a matching page request pending to respond,
+ * otherwise return -EINVAL
+ */
+ list_for_each_entry(evt, ¶m->fault_param->faults, list) {
+ if (evt->fault.prm.pasid == msg->pasid &&
+ evt->fault.prm.grpid == msg->grpid) {
+ msg->iommu_data = evt->iommu_private;
+ ret = domain->ops->page_response(dev, msg);
+ list_del(&evt->list);
+ kfree(evt);
+ break;
+ }
+ }
+
+done_unlock:
+ mutex_unlock(¶m->fault_param->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(iommu_page_response);
+
static void __iommu_detach_device(struct iommu_domain *domain,
struct device *dev)
{
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index b87b74c..950347b 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -192,6 +192,42 @@ struct iommu_sva_ops {
#ifdef CONFIG_IOMMU_API
/**
+ * enum page_response_code - Return status of fault handlers, telling the IOMMU
+ * driver how to proceed with the fault.
+ *
+ * @IOMMU_PAGE_RESP_SUCCESS: Fault has been handled and the page tables
+ * populated, retry the access. This is "Success" in PCI PRI.
+ * @IOMMU_PAGE_RESP_FAILURE: General error. Drop all subsequent faults from
+ * this device if possible. This is "Response Failure" in PCI PRI.
+ * @IOMMU_PAGE_RESP_INVALID: Could not handle this fault, don't retry the
+ * access. This is "Invalid Request" in PCI PRI.
+ */
+enum page_response_code {
+ IOMMU_PAGE_RESP_SUCCESS = 0,
+ IOMMU_PAGE_RESP_INVALID,
+ IOMMU_PAGE_RESP_FAILURE,
+};
+
+/**
+ * struct page_response_msg - Generic page response information based on PCI ATS
+ * and PASID spec
+ * @addr: servicing page address
+ * @pasid: contains process address space ID
+ * @pasid_present: the @pasid field is valid
+ * @resp_code: response code
+ * @grpid: page request group index
+ * @iommu_data: data private to the IOMMU
+ */
+struct page_response_msg {
+ u64 addr;
+ u32 pasid;
+ u32 pasid_present:1;
+ enum page_response_code resp_code;
+ u32 grpid;
+ u64 iommu_data;
+};
+
+/**
* struct iommu_ops - iommu ops and capabilities
* @capable: check capability
* @domain_alloc: allocate iommu domain
@@ -227,6 +263,7 @@ struct iommu_sva_ops {
* @sva_bind: Bind process address space to device
* @sva_unbind: Unbind process address space from device
* @sva_get_pasid: Get PASID associated to a SVA handle
+ * @page_response: handle page request response
* @pgsize_bitmap: bitmap of all possible supported page sizes
*/
struct iommu_ops {
@@ -287,6 +324,8 @@ struct iommu_ops {
void (*sva_unbind)(struct iommu_sva *handle);
int (*sva_get_pasid)(struct iommu_sva *handle);
+ int (*page_response)(struct device *dev, struct page_response_msg *msg);
+
unsigned long pgsize_bitmap;
};
@@ -311,11 +350,13 @@ struct iommu_device {
* unrecoverable faults such as DMA or IRQ remapping faults.
*
* @fault: fault descriptor
+ * @list: pending fault event list, used for tracking responses
* @iommu_private: used by the IOMMU driver for storing fault-specific
* data. Users should not modify this field before
* sending the fault response.
*/
struct iommu_fault_event {
+ struct list_head list;
struct iommu_fault fault;
u64 iommu_private;
};
@@ -325,10 +366,14 @@ struct iommu_fault_event {
*
* @handler: Callback function to handle IOMMU faults at device level
* @data: handler private data
+ * @faults: holds the pending faults which needs response, e.g. page response.
+ * @lock: protect pending faults list
*/
struct iommu_fault_param {
iommu_dev_fault_handler_t handler;
void *data;
+ struct list_head faults;
+ struct mutex lock;
};
/**
@@ -443,6 +488,7 @@ extern int iommu_unregister_device_fault_handler(struct device *dev);
extern int iommu_report_device_fault(struct device *dev,
struct iommu_fault_event *evt);
+extern int iommu_page_response(struct device *dev, struct page_response_msg *msg);
extern int iommu_group_id(struct iommu_group *group);
extern struct iommu_group *iommu_group_get_for_dev(struct device *dev);
extern struct iommu_domain *iommu_group_default_domain(struct iommu_group *);
@@ -770,6 +816,11 @@ int iommu_report_device_fault(struct device *dev, struct iommu_fault_event *evt)
return -ENODEV;
}
+static inline int iommu_page_response(struct device *dev, struct page_response_msg *msg)
+{
+ return -ENODEV;
+}
+
static inline int iommu_group_id(struct iommu_group *group)
{
return -ENODEV;
--
2.7.4
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2019-06-09 13:41 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-09 13:44 [PATCH v4 00/22] Shared virtual address IOMMU and VT-d support Jacob Pan
2019-06-09 13:44 ` [PATCH v4 01/22] driver core: Add per device iommu param Jacob Pan
2019-06-09 13:44 ` [PATCH v4 02/22] iommu: Introduce device fault data Jacob Pan
2019-06-18 15:42 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 03/22] iommu: Introduce device fault report API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-09 13:44 ` Jacob Pan [this message]
2019-06-18 15:44 ` [PATCH v4 04/22] iommu: Add recoverable fault reporting Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 05/22] iommu: Add a timeout parameter for PRQ response Jacob Pan
2019-06-09 13:44 ` [PATCH v4 06/22] trace/iommu: Add sva trace events Jacob Pan
2019-06-09 13:44 ` [PATCH v4 07/22] iommu: Use device fault trace event Jacob Pan
2019-06-09 13:44 ` [PATCH v4 08/22] iommu: Introduce attach/detach_pasid_table API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-24 15:06 ` Auger Eric
2019-06-24 15:23 ` Jean-Philippe Brucker
2019-06-09 13:44 ` [PATCH v4 09/22] iommu: Introduce cache_invalidate API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 10/22] iommu: Fix compile error without IOMMU_API Jacob Pan
2019-06-18 14:10 ` Jonathan Cameron
2019-06-24 22:28 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 11/22] iommu: Introduce guest PASID bind function Jacob Pan
2019-06-18 15:36 ` Jean-Philippe Brucker
2019-06-24 22:24 ` Jacob Pan
2019-07-16 16:44 ` Auger Eric
2019-08-05 21:02 ` Jacob Pan
2019-08-05 23:13 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 12/22] iommu: Add I/O ASID allocator Jacob Pan
2019-06-18 16:50 ` Jonathan Cameron
2019-06-25 18:55 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 13/22] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-07-16 9:29 ` Auger Eric
2019-08-13 16:57 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 14/22] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-07-16 9:30 ` Auger Eric
2019-08-05 20:02 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 15/22] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-06-18 15:57 ` Jonathan Cameron
2019-06-24 21:36 ` Jacob Pan
2019-06-27 1:53 ` Lu Baolu
2019-06-27 15:40 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 16/22] iommu/vt-d: Move domain helper to header Jacob Pan
2019-07-16 9:33 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 17/22] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-06-18 16:03 ` Jonathan Cameron
2019-06-24 23:44 ` Jacob Pan
2019-07-16 9:52 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 18/22] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-06-09 13:44 ` [PATCH v4 19/22] iommu/vt-d: Clean up for SVM device list Jacob Pan
2019-06-18 16:42 ` Jonathan Cameron
2019-06-24 23:59 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 20/22] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-06-18 16:44 ` Jonathan Cameron
2019-06-24 22:41 ` Jacob Pan
2019-06-27 2:50 ` Lu Baolu
2019-06-27 20:22 ` Jacob Pan
2019-07-05 2:21 ` Lu Baolu
2019-08-14 17:20 ` Jacob Pan
2019-07-16 16:45 ` Auger Eric
2019-07-16 17:04 ` Raj, Ashok
2019-07-18 7:47 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 21/22] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-07-18 8:35 ` Auger Eric
2019-08-14 20:17 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 22/22] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1560087862-57608-5-git-send-email-jacob.jun.pan@linux.intel.com \
--to=jacob.jun.pan@linux.intel.com \
--cc=alex.williamson@redhat.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=dwmw2@infradead.org \
--cc=eric.auger@redhat.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jean-philippe.brucker@arm.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox