From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>,
Jean-Philippe Brucker <jean-philippe.brucker@arm.com>,
iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Alex Williamson <alex.williamson@redhat.com>,
Andriy Shevchenko <andriy.shevchenko@linux.intel.com>,
David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH v4 09/22] iommu: Introduce cache_invalidate API
Date: Tue, 18 Jun 2019 16:41:05 +0100 [thread overview]
Message-ID: <20190618164105.0000077b@huawei.com> (raw)
In-Reply-To: <1560087862-57608-10-git-send-email-jacob.jun.pan@linux.intel.com>
On Sun, 9 Jun 2019 06:44:09 -0700
Jacob Pan <jacob.jun.pan@linux.intel.com> wrote:
> From: Liu Yi L <yi.l.liu@intel.com>
>
> In any virtualization use case, when the first translation stage
> is "owned" by the guest OS, the host IOMMU driver has no knowledge
> of caching structure updates unless the guest invalidation activities
> are trapped by the virtualizer and passed down to the host.
>
> Since the invalidation data are obtained from user space and will be
> written into physical IOMMU, we must allow security check at various
> layers. Therefore, generic invalidation data format are proposed here,
> model specific IOMMU drivers need to convert them into their own format.
>
> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Signed-off-by: Ashok Raj <ashok.raj@intel.com>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Some comment ordering nitpicks. Nothing important.
Jonathan
> ---
> drivers/iommu/iommu.c | 10 +++++
> include/linux/iommu.h | 14 ++++++
> include/uapi/linux/iommu.h | 110 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 134 insertions(+)
>
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index 4496ccd..1758b57 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -1638,6 +1638,16 @@ void iommu_detach_pasid_table(struct iommu_domain *domain)
> }
> EXPORT_SYMBOL_GPL(iommu_detach_pasid_table);
>
> +int iommu_cache_invalidate(struct iommu_domain *domain, struct device *dev,
> + struct iommu_cache_invalidate_info *inv_info)
> +{
> + if (unlikely(!domain->ops->cache_invalidate))
> + return -ENODEV;
> +
> + return domain->ops->cache_invalidate(domain, dev, inv_info);
> +}
> +EXPORT_SYMBOL_GPL(iommu_cache_invalidate);
> +
> static void __iommu_detach_device(struct iommu_domain *domain,
> struct device *dev)
> {
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index d3edb10..7a37336 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -266,6 +266,7 @@ struct page_response_msg {
> * @page_response: handle page request response
> * @attach_pasid_table: attach a pasid table
> * @detach_pasid_table: detach the pasid table
> + * @cache_invalidate: invalidate translation caches
> * @pgsize_bitmap: bitmap of all possible supported page sizes
> */
> struct iommu_ops {
> @@ -330,6 +331,8 @@ struct iommu_ops {
> void (*detach_pasid_table)(struct iommu_domain *domain);
>
> int (*page_response)(struct device *dev, struct page_response_msg *msg);
> + int (*cache_invalidate)(struct iommu_domain *domain, struct device *dev,
> + struct iommu_cache_invalidate_info *inv_info);
>
> unsigned long pgsize_bitmap;
> };
> @@ -442,6 +445,9 @@ extern void iommu_detach_device(struct iommu_domain *domain,
> extern int iommu_attach_pasid_table(struct iommu_domain *domain,
> struct iommu_pasid_table_config *cfg);
> extern void iommu_detach_pasid_table(struct iommu_domain *domain);
> +extern int iommu_cache_invalidate(struct iommu_domain *domain,
> + struct device *dev,
> + struct iommu_cache_invalidate_info *inv_info);
> extern struct iommu_domain *iommu_get_domain_for_dev(struct device *dev);
> extern struct iommu_domain *iommu_get_dma_domain(struct device *dev);
> extern int iommu_map(struct iommu_domain *domain, unsigned long iova,
> @@ -986,6 +992,14 @@ static inline int iommu_sva_get_pasid(struct iommu_sva *handle)
> static inline
> void iommu_detach_pasid_table(struct iommu_domain *domain) {}
>
> +static inline int
> +iommu_cache_invalidate(struct iommu_domain *domain,
> + struct device *dev,
> + struct iommu_cache_invalidate_info *inv_info)
> +{
> + return -ENODEV;
> +}
> +
> #endif /* CONFIG_IOMMU_API */
>
> #ifdef CONFIG_IOMMU_DEBUGFS
> diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
> index 3976767..ca4b753 100644
> --- a/include/uapi/linux/iommu.h
> +++ b/include/uapi/linux/iommu.h
> @@ -167,4 +167,114 @@ struct iommu_pasid_table_config {
> };
> };
>
> +/* defines the granularity of the invalidation */
> +enum iommu_inv_granularity {
> + IOMMU_INV_GRANU_DOMAIN, /* domain-selective invalidation */
> + IOMMU_INV_GRANU_PASID, /* PASID-selective invalidation */
> + IOMMU_INV_GRANU_ADDR, /* page-selective invalidation */
> + IOMMU_INV_GRANU_NR, /* number of invalidation granularities */
> +};
> +
> +/**
> + * struct iommu_inv_addr_info - Address Selective Invalidation Structure
> + *
> + * @flags: indicates the granularity of the address-selective invalidation
> + * - If the PASID bit is set, the @pasid field is populated and the invalidation
> + * relates to cache entries tagged with this PASID and matching the address
> + * range.
> + * - If ARCHID bit is set, @archid is populated and the invalidation relates
> + * to cache entries tagged with this architecture specific ID and matching
> + * the address range.
> + * - Both PASID and ARCHID can be set as they may tag different caches.
> + * - If neither PASID or ARCHID is set, global addr invalidation applies.
> + * - The LEAF flag indicates whether only the leaf PTE caching needs to be
> + * invalidated and other paging structure caches can be preserved.
> + * @pasid: process address space ID
> + * @archid: architecture-specific ID
Parameter ordering should match between docs and structure.
Might make more sense in some ways to not do so but the kernel-doc
guid states
"The kernel-doc data structure comments describe each member of the structure,
in order, with the @member: descriptions. "
> + * @addr: first stage/level input address
> + * @granule_size: page/block size of the mapping in bytes
> + * @nb_granules: number of contiguous granules to be invalidated
> + */
> +struct iommu_inv_addr_info {
> +#define IOMMU_INV_ADDR_FLAGS_PASID (1 << 0)
> +#define IOMMU_INV_ADDR_FLAGS_ARCHID (1 << 1)
> +#define IOMMU_INV_ADDR_FLAGS_LEAF (1 << 2)
> + __u32 flags;
> + __u32 archid;
> + __u64 pasid;
> + __u64 addr;
> + __u64 granule_size;
> + __u64 nb_granules;
> +};
> +
> +/**
> + * struct iommu_inv_pasid_info - PASID Selective Invalidation Structure
> + *
> + * @flags: indicates the granularity of the PASID-selective invalidation
> + * - If the PASID bit is set, the @pasid field is populated and the invalidation
> + * relates to cache entries tagged with this PASID and matching the address
> + * range.
> + * - If the ARCHID bit is set, the @archid is populated and the invalidation
> + * relates to cache entries tagged with this architecture specific ID and
> + * matching the address range.
> + * - Both PASID and ARCHID can be set as they may tag different caches.
> + * - At least one of PASID or ARCHID must be set.
> + * @pasid: process address space ID
> + * @archid: architecture-specific ID
Ordering of parameters is different from below.
> + */
> +struct iommu_inv_pasid_info {
> +#define IOMMU_INV_PASID_FLAGS_PASID (1 << 0)
> +#define IOMMU_INV_PASID_FLAGS_ARCHID (1 << 1)
> + __u32 flags;
> + __u32 archid;
> + __u64 pasid;
> +};
> +
> +/**
> + * struct iommu_cache_invalidate_info - First level/stage invalidation
> + * information
> + * @version: API version of this structure
> + * @cache: bitfield that allows to select which caches to invalidate
> + * @granularity: defines the lowest granularity used for the invalidation:
> + * domain > PASID > addr
> + * @padding: reserved for future use (should be zero)
> + * @pasid_info: invalidation data when @granularity is %IOMMU_INV_GRANU_PASID
> + * @addr_info: invalidation data when @granularity is %IOMMU_INV_GRANU_ADDR
> + *
> + * Not all the combinations of cache/granularity are valid:
> + *
> + * +--------------+---------------+---------------+---------------+
> + * | type / | DEV_IOTLB | IOTLB | PASID |
> + * | granularity | | | cache |
> + * +==============+===============+===============+===============+
> + * | DOMAIN | N/A | Y | Y |
> + * +--------------+---------------+---------------+---------------+
> + * | PASID | Y | Y | Y |
> + * +--------------+---------------+---------------+---------------+
> + * | ADDR | Y | Y | N/A |
> + * +--------------+---------------+---------------+---------------+
> + *
> + * Invalidations by %IOMMU_INV_GRANU_DOMAIN don't take any argument other than
> + * @version and @cache.
> + *
> + * If multiple cache types are invalidated simultaneously, they all
> + * must support the used granularity.
> + */
> +struct iommu_cache_invalidate_info {
> +#define IOMMU_CACHE_INVALIDATE_INFO_VERSION_1 1
> + __u32 version;
> +/* IOMMU paging structure cache */
> +#define IOMMU_CACHE_INV_TYPE_IOTLB (1 << 0) /* IOMMU IOTLB */
> +#define IOMMU_CACHE_INV_TYPE_DEV_IOTLB (1 << 1) /* Device IOTLB */
> +#define IOMMU_CACHE_INV_TYPE_PASID (1 << 2) /* PASID cache */
> +#define IOMMU_CACHE_INV_TYPE_NR (3)
> + __u8 cache;
> + __u8 granularity;
> + __u8 padding[2];
> + union {
> + struct iommu_inv_pasid_info pasid_info;
> + struct iommu_inv_addr_info addr_info;
> + };
> +};
> +
> #endif /* _UAPI_IOMMU_H */
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2019-06-18 15:41 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-09 13:44 [PATCH v4 00/22] Shared virtual address IOMMU and VT-d support Jacob Pan
2019-06-09 13:44 ` [PATCH v4 01/22] driver core: Add per device iommu param Jacob Pan
2019-06-09 13:44 ` [PATCH v4 02/22] iommu: Introduce device fault data Jacob Pan
2019-06-18 15:42 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 03/22] iommu: Introduce device fault report API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 04/22] iommu: Add recoverable fault reporting Jacob Pan
2019-06-18 15:44 ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 05/22] iommu: Add a timeout parameter for PRQ response Jacob Pan
2019-06-09 13:44 ` [PATCH v4 06/22] trace/iommu: Add sva trace events Jacob Pan
2019-06-09 13:44 ` [PATCH v4 07/22] iommu: Use device fault trace event Jacob Pan
2019-06-09 13:44 ` [PATCH v4 08/22] iommu: Introduce attach/detach_pasid_table API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron
2019-06-24 15:06 ` Auger Eric
2019-06-24 15:23 ` Jean-Philippe Brucker
2019-06-09 13:44 ` [PATCH v4 09/22] iommu: Introduce cache_invalidate API Jacob Pan
2019-06-18 15:41 ` Jonathan Cameron [this message]
2019-06-09 13:44 ` [PATCH v4 10/22] iommu: Fix compile error without IOMMU_API Jacob Pan
2019-06-18 14:10 ` Jonathan Cameron
2019-06-24 22:28 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 11/22] iommu: Introduce guest PASID bind function Jacob Pan
2019-06-18 15:36 ` Jean-Philippe Brucker
2019-06-24 22:24 ` Jacob Pan
2019-07-16 16:44 ` Auger Eric
2019-08-05 21:02 ` Jacob Pan
2019-08-05 23:13 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 12/22] iommu: Add I/O ASID allocator Jacob Pan
2019-06-18 16:50 ` Jonathan Cameron
2019-06-25 18:55 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 13/22] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-07-16 9:29 ` Auger Eric
2019-08-13 16:57 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 14/22] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-07-16 9:30 ` Auger Eric
2019-08-05 20:02 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 15/22] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-06-18 15:57 ` Jonathan Cameron
2019-06-24 21:36 ` Jacob Pan
2019-06-27 1:53 ` Lu Baolu
2019-06-27 15:40 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 16/22] iommu/vt-d: Move domain helper to header Jacob Pan
2019-07-16 9:33 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 17/22] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-06-18 16:03 ` Jonathan Cameron
2019-06-24 23:44 ` Jacob Pan
2019-07-16 9:52 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 18/22] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-06-09 13:44 ` [PATCH v4 19/22] iommu/vt-d: Clean up for SVM device list Jacob Pan
2019-06-18 16:42 ` Jonathan Cameron
2019-06-24 23:59 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 20/22] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-06-18 16:44 ` Jonathan Cameron
2019-06-24 22:41 ` Jacob Pan
2019-06-27 2:50 ` Lu Baolu
2019-06-27 20:22 ` Jacob Pan
2019-07-05 2:21 ` Lu Baolu
2019-08-14 17:20 ` Jacob Pan
2019-07-16 16:45 ` Auger Eric
2019-07-16 17:04 ` Raj, Ashok
2019-07-18 7:47 ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 21/22] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-07-18 8:35 ` Auger Eric
2019-08-14 20:17 ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 22/22] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190618164105.0000077b@huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alex.williamson@redhat.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=dwmw2@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jacob.jun.pan@linux.intel.com \
--cc=jean-philippe.brucker@arm.com \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox