* [PATCH v6 16/16] iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition
[not found] <20210203150435.27941-1-wei.liu@kernel.org>
@ 2021-02-03 15:04 ` Wei Liu
2021-02-04 13:33 ` Joerg Roedel
2021-02-04 17:53 ` Michael Kelley via iommu
0 siblings, 2 replies; 3+ messages in thread
From: Wei Liu @ 2021-02-03 15:04 UTC (permalink / raw)
To: Linux on Hyper-V List
Cc: Wei Liu, K. Y. Srinivasan, Stephen Hemminger, pasha.tatashin,
Will Deacon, Haiyang Zhang,
maintainer:X86 ARCHITECTURE 32-BIT AND 64-BIT, Linux Kernel List,
Michael Kelley, open list:IOMMU DRIVERS, Ingo Molnar,
Borislav Petkov, H. Peter Anvin, Nuno Das Neves, Sunil Muthuswamy,
virtualization, Vineeth Pillai, Thomas Gleixner
Just like MSI/MSI-X, IO-APIC interrupts are remapped by Microsoft
Hypervisor when Linux runs as the root partition. Implement an IRQ
domain to handle mapping and unmapping of IO-APIC interrupts.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
---
v6:
1. Simplify code due to changes in a previous patch.
---
arch/x86/hyperv/irqdomain.c | 25 +++++
arch/x86/include/asm/mshyperv.h | 4 +
drivers/iommu/hyperv-iommu.c | 177 +++++++++++++++++++++++++++++++-
3 files changed, 203 insertions(+), 3 deletions(-)
diff --git a/arch/x86/hyperv/irqdomain.c b/arch/x86/hyperv/irqdomain.c
index 117f17e8c88a..0cabc9aece38 100644
--- a/arch/x86/hyperv/irqdomain.c
+++ b/arch/x86/hyperv/irqdomain.c
@@ -360,3 +360,28 @@ struct irq_domain * __init hv_create_pci_msi_domain(void)
}
#endif /* CONFIG_PCI_MSI */
+
+int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry)
+{
+ union hv_device_id device_id;
+
+ device_id.as_uint64 = 0;
+ device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
+ device_id.ioapic.ioapic_id = (u8)ioapic_id;
+
+ return hv_unmap_interrupt(device_id.as_uint64, entry);
+}
+EXPORT_SYMBOL_GPL(hv_unmap_ioapic_interrupt);
+
+int hv_map_ioapic_interrupt(int ioapic_id, bool level, int cpu, int vector,
+ struct hv_interrupt_entry *entry)
+{
+ union hv_device_id device_id;
+
+ device_id.as_uint64 = 0;
+ device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
+ device_id.ioapic.ioapic_id = (u8)ioapic_id;
+
+ return hv_map_interrupt(device_id, level, cpu, vector, entry);
+}
+EXPORT_SYMBOL_GPL(hv_map_ioapic_interrupt);
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index ccc849e25d5e..345d7c6f8c37 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -263,6 +263,10 @@ static inline void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry,
struct irq_domain *hv_create_pci_msi_domain(void);
+int hv_map_ioapic_interrupt(int ioapic_id, bool level, int vcpu, int vector,
+ struct hv_interrupt_entry *entry);
+int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry);
+
#else /* CONFIG_HYPERV */
static inline void hyperv_init(void) {}
static inline void hyperv_setup_mmu_ops(void) {}
diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c
index 1d21a0b5f724..e285a220c913 100644
--- a/drivers/iommu/hyperv-iommu.c
+++ b/drivers/iommu/hyperv-iommu.c
@@ -20,6 +20,7 @@
#include <asm/io_apic.h>
#include <asm/irq_remapping.h>
#include <asm/hypervisor.h>
+#include <asm/mshyperv.h>
#include "irq_remapping.h"
@@ -115,30 +116,43 @@ static const struct irq_domain_ops hyperv_ir_domain_ops = {
.free = hyperv_irq_remapping_free,
};
+static const struct irq_domain_ops hyperv_root_ir_domain_ops;
static int __init hyperv_prepare_irq_remapping(void)
{
struct fwnode_handle *fn;
int i;
+ const char *name;
+ const struct irq_domain_ops *ops;
if (!hypervisor_is_type(X86_HYPER_MS_HYPERV) ||
x86_init.hyper.msi_ext_dest_id() ||
!x2apic_supported())
return -ENODEV;
- fn = irq_domain_alloc_named_id_fwnode("HYPERV-IR", 0);
+ if (hv_root_partition) {
+ name = "HYPERV-ROOT-IR";
+ ops = &hyperv_root_ir_domain_ops;
+ } else {
+ name = "HYPERV-IR";
+ ops = &hyperv_ir_domain_ops;
+ }
+
+ fn = irq_domain_alloc_named_id_fwnode(name, 0);
if (!fn)
return -ENOMEM;
ioapic_ir_domain =
irq_domain_create_hierarchy(arch_get_ir_parent_domain(),
- 0, IOAPIC_REMAPPING_ENTRY, fn,
- &hyperv_ir_domain_ops, NULL);
+ 0, IOAPIC_REMAPPING_ENTRY, fn, ops, NULL);
if (!ioapic_ir_domain) {
irq_domain_free_fwnode(fn);
return -ENOMEM;
}
+ if (hv_root_partition)
+ return 0; /* The rest is only relevant to guests */
+
/*
* Hyper-V doesn't provide irq remapping function for
* IO-APIC and so IO-APIC only accepts 8-bit APIC ID.
@@ -166,4 +180,161 @@ struct irq_remap_ops hyperv_irq_remap_ops = {
.enable = hyperv_enable_irq_remapping,
};
+/* IRQ remapping domain when Linux runs as the root partition */
+struct hyperv_root_ir_data {
+ u8 ioapic_id;
+ bool is_level;
+ struct hv_interrupt_entry entry;
+};
+
+static void
+hyperv_root_ir_compose_msi_msg(struct irq_data *irq_data, struct msi_msg *msg)
+{
+ u64 status;
+ u32 vector;
+ struct irq_cfg *cfg;
+ int ioapic_id;
+ struct cpumask *affinity;
+ int cpu;
+ struct hv_interrupt_entry entry;
+ struct hyperv_root_ir_data *data = irq_data->chip_data;
+ struct IO_APIC_route_entry e;
+
+ cfg = irqd_cfg(irq_data);
+ affinity = irq_data_get_effective_affinity_mask(irq_data);
+ cpu = cpumask_first_and(affinity, cpu_online_mask);
+
+ vector = cfg->vector;
+ ioapic_id = data->ioapic_id;
+
+ if (data->entry.source == HV_DEVICE_TYPE_IOAPIC
+ && data->entry.ioapic_rte.as_uint64) {
+ entry = data->entry;
+
+ status = hv_unmap_ioapic_interrupt(ioapic_id, &entry);
+
+ if (status != HV_STATUS_SUCCESS)
+ pr_debug("%s: unexpected unmap status %lld\n", __func__, status);
+
+ data->entry.ioapic_rte.as_uint64 = 0;
+ data->entry.source = 0; /* Invalid source */
+ }
+
+
+ status = hv_map_ioapic_interrupt(ioapic_id, data->is_level, cpu,
+ vector, &entry);
+
+ if (status != HV_STATUS_SUCCESS) {
+ pr_err("%s: map hypercall failed, status %lld\n", __func__, status);
+ return;
+ }
+
+ data->entry = entry;
+
+ /* Turn it into an IO_APIC_route_entry, and generate MSI MSG. */
+ e.w1 = entry.ioapic_rte.low_uint32;
+ e.w2 = entry.ioapic_rte.high_uint32;
+
+ memset(msg, 0, sizeof(*msg));
+ msg->arch_data.vector = e.vector;
+ msg->arch_data.delivery_mode = e.delivery_mode;
+ msg->arch_addr_lo.dest_mode_logical = e.dest_mode_logical;
+ msg->arch_addr_lo.dmar_format = e.ir_format;
+ msg->arch_addr_lo.dmar_index_0_14 = e.ir_index_0_14;
+}
+
+static int hyperv_root_ir_set_affinity(struct irq_data *data,
+ const struct cpumask *mask, bool force)
+{
+ struct irq_data *parent = data->parent_data;
+ struct irq_cfg *cfg = irqd_cfg(data);
+ int ret;
+
+ ret = parent->chip->irq_set_affinity(parent, mask, force);
+ if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
+ return ret;
+
+ send_cleanup_vector(cfg);
+
+ return 0;
+}
+
+static struct irq_chip hyperv_root_ir_chip = {
+ .name = "HYPERV-ROOT-IR",
+ .irq_ack = apic_ack_irq,
+ .irq_set_affinity = hyperv_root_ir_set_affinity,
+ .irq_compose_msi_msg = hyperv_root_ir_compose_msi_msg,
+};
+
+static int hyperv_root_irq_remapping_alloc(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs,
+ void *arg)
+{
+ struct irq_alloc_info *info = arg;
+ struct irq_data *irq_data;
+ struct hyperv_root_ir_data *data;
+ int ret = 0;
+
+ if (!info || info->type != X86_IRQ_ALLOC_TYPE_IOAPIC || nr_irqs > 1)
+ return -EINVAL;
+
+ ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+ if (ret < 0)
+ return ret;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ irq_domain_free_irqs_common(domain, virq, nr_irqs);
+ return -ENOMEM;
+ }
+
+ irq_data = irq_domain_get_irq_data(domain, virq);
+ if (!irq_data) {
+ kfree(data);
+ irq_domain_free_irqs_common(domain, virq, nr_irqs);
+ return -EINVAL;
+ }
+
+ data->ioapic_id = info->devid;
+ data->is_level = info->ioapic.is_level;
+
+ irq_data->chip = &hyperv_root_ir_chip;
+ irq_data->chip_data = data;
+
+ return 0;
+}
+
+static void hyperv_root_irq_remapping_free(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs)
+{
+ struct irq_data *irq_data;
+ struct hyperv_root_ir_data *data;
+ struct hv_interrupt_entry *e;
+ int i;
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_data = irq_domain_get_irq_data(domain, virq + i);
+
+ if (irq_data && irq_data->chip_data) {
+ data = irq_data->chip_data;
+ e = &data->entry;
+
+ if (e->source == HV_DEVICE_TYPE_IOAPIC
+ && e->ioapic_rte.as_uint64)
+ hv_unmap_ioapic_interrupt(data->ioapic_id,
+ &data->entry);
+
+ kfree(data);
+ }
+ }
+
+ irq_domain_free_irqs_common(domain, virq, nr_irqs);
+}
+
+static const struct irq_domain_ops hyperv_root_ir_domain_ops = {
+ .select = hyperv_irq_remapping_select,
+ .alloc = hyperv_root_irq_remapping_alloc,
+ .free = hyperv_root_irq_remapping_free,
+};
+
#endif
--
2.20.1
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v6 16/16] iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition
2021-02-03 15:04 ` [PATCH v6 16/16] iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition Wei Liu
@ 2021-02-04 13:33 ` Joerg Roedel
2021-02-04 17:53 ` Michael Kelley via iommu
1 sibling, 0 replies; 3+ messages in thread
From: Joerg Roedel @ 2021-02-04 13:33 UTC (permalink / raw)
To: Wei Liu
Cc: Linux on Hyper-V List, K. Y. Srinivasan, Stephen Hemminger,
pasha.tatashin, Will Deacon, Haiyang Zhang,
maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT),
Linux Kernel List, Michael Kelley, open list:IOMMU DRIVERS,
Ingo Molnar, Borislav Petkov, H. Peter Anvin, Nuno Das Neves,
Sunil Muthuswamy, virtualization, Vineeth Pillai, Thomas Gleixner
On Wed, Feb 03, 2021 at 03:04:35PM +0000, Wei Liu wrote:
> Just like MSI/MSI-X, IO-APIC interrupts are remapped by Microsoft
> Hypervisor when Linux runs as the root partition. Implement an IRQ
> domain to handle mapping and unmapping of IO-APIC interrupts.
>
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
> ---
> v6:
> 1. Simplify code due to changes in a previous patch.
> ---
> arch/x86/hyperv/irqdomain.c | 25 +++++
> arch/x86/include/asm/mshyperv.h | 4 +
> drivers/iommu/hyperv-iommu.c | 177 +++++++++++++++++++++++++++++++-
> 3 files changed, 203 insertions(+), 3 deletions(-)
>
> diff --git a/arch/x86/hyperv/irqdomain.c b/arch/x86/hyperv/irqdomain.c
> index 117f17e8c88a..0cabc9aece38 100644
> --- a/arch/x86/hyperv/irqdomain.c
> +++ b/arch/x86/hyperv/irqdomain.c
> @@ -360,3 +360,28 @@ struct irq_domain * __init hv_create_pci_msi_domain(void)
> }
>
> #endif /* CONFIG_PCI_MSI */
> +
> +int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry)
> +{
> + union hv_device_id device_id;
> +
> + device_id.as_uint64 = 0;
> + device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
> + device_id.ioapic.ioapic_id = (u8)ioapic_id;
> +
> + return hv_unmap_interrupt(device_id.as_uint64, entry);
> +}
> +EXPORT_SYMBOL_GPL(hv_unmap_ioapic_interrupt);
> +
> +int hv_map_ioapic_interrupt(int ioapic_id, bool level, int cpu, int vector,
> + struct hv_interrupt_entry *entry)
> +{
> + union hv_device_id device_id;
> +
> + device_id.as_uint64 = 0;
> + device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
> + device_id.ioapic.ioapic_id = (u8)ioapic_id;
> +
> + return hv_map_interrupt(device_id, level, cpu, vector, entry);
> +}
> +EXPORT_SYMBOL_GPL(hv_map_ioapic_interrupt);
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index ccc849e25d5e..345d7c6f8c37 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -263,6 +263,10 @@ static inline void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry,
>
> struct irq_domain *hv_create_pci_msi_domain(void);
>
> +int hv_map_ioapic_interrupt(int ioapic_id, bool level, int vcpu, int vector,
> + struct hv_interrupt_entry *entry);
> +int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry);
> +
> #else /* CONFIG_HYPERV */
> static inline void hyperv_init(void) {}
> static inline void hyperv_setup_mmu_ops(void) {}
> diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c
> index 1d21a0b5f724..e285a220c913 100644
> --- a/drivers/iommu/hyperv-iommu.c
> +++ b/drivers/iommu/hyperv-iommu.c
> @@ -20,6 +20,7 @@
> #include <asm/io_apic.h>
> #include <asm/irq_remapping.h>
> #include <asm/hypervisor.h>
> +#include <asm/mshyperv.h>
>
> #include "irq_remapping.h"
>
> @@ -115,30 +116,43 @@ static const struct irq_domain_ops hyperv_ir_domain_ops = {
> .free = hyperv_irq_remapping_free,
> };
>
> +static const struct irq_domain_ops hyperv_root_ir_domain_ops;
> static int __init hyperv_prepare_irq_remapping(void)
> {
> struct fwnode_handle *fn;
> int i;
> + const char *name;
> + const struct irq_domain_ops *ops;
>
> if (!hypervisor_is_type(X86_HYPER_MS_HYPERV) ||
> x86_init.hyper.msi_ext_dest_id() ||
> !x2apic_supported())
> return -ENODEV;
>
> - fn = irq_domain_alloc_named_id_fwnode("HYPERV-IR", 0);
> + if (hv_root_partition) {
> + name = "HYPERV-ROOT-IR";
> + ops = &hyperv_root_ir_domain_ops;
> + } else {
> + name = "HYPERV-IR";
> + ops = &hyperv_ir_domain_ops;
> + }
> +
> + fn = irq_domain_alloc_named_id_fwnode(name, 0);
> if (!fn)
> return -ENOMEM;
>
> ioapic_ir_domain =
> irq_domain_create_hierarchy(arch_get_ir_parent_domain(),
> - 0, IOAPIC_REMAPPING_ENTRY, fn,
> - &hyperv_ir_domain_ops, NULL);
> + 0, IOAPIC_REMAPPING_ENTRY, fn, ops, NULL);
>
> if (!ioapic_ir_domain) {
> irq_domain_free_fwnode(fn);
> return -ENOMEM;
> }
>
> + if (hv_root_partition)
> + return 0; /* The rest is only relevant to guests */
> +
> /*
> * Hyper-V doesn't provide irq remapping function for
> * IO-APIC and so IO-APIC only accepts 8-bit APIC ID.
> @@ -166,4 +180,161 @@ struct irq_remap_ops hyperv_irq_remap_ops = {
> .enable = hyperv_enable_irq_remapping,
> };
>
> +/* IRQ remapping domain when Linux runs as the root partition */
> +struct hyperv_root_ir_data {
> + u8 ioapic_id;
> + bool is_level;
> + struct hv_interrupt_entry entry;
> +};
> +
> +static void
> +hyperv_root_ir_compose_msi_msg(struct irq_data *irq_data, struct msi_msg *msg)
> +{
> + u64 status;
> + u32 vector;
> + struct irq_cfg *cfg;
> + int ioapic_id;
> + struct cpumask *affinity;
> + int cpu;
> + struct hv_interrupt_entry entry;
> + struct hyperv_root_ir_data *data = irq_data->chip_data;
> + struct IO_APIC_route_entry e;
> +
> + cfg = irqd_cfg(irq_data);
> + affinity = irq_data_get_effective_affinity_mask(irq_data);
> + cpu = cpumask_first_and(affinity, cpu_online_mask);
> +
> + vector = cfg->vector;
> + ioapic_id = data->ioapic_id;
> +
> + if (data->entry.source == HV_DEVICE_TYPE_IOAPIC
> + && data->entry.ioapic_rte.as_uint64) {
> + entry = data->entry;
> +
> + status = hv_unmap_ioapic_interrupt(ioapic_id, &entry);
> +
> + if (status != HV_STATUS_SUCCESS)
> + pr_debug("%s: unexpected unmap status %lld\n", __func__, status);
> +
> + data->entry.ioapic_rte.as_uint64 = 0;
> + data->entry.source = 0; /* Invalid source */
> + }
> +
> +
> + status = hv_map_ioapic_interrupt(ioapic_id, data->is_level, cpu,
> + vector, &entry);
> +
> + if (status != HV_STATUS_SUCCESS) {
> + pr_err("%s: map hypercall failed, status %lld\n", __func__, status);
> + return;
> + }
> +
> + data->entry = entry;
> +
> + /* Turn it into an IO_APIC_route_entry, and generate MSI MSG. */
> + e.w1 = entry.ioapic_rte.low_uint32;
> + e.w2 = entry.ioapic_rte.high_uint32;
> +
> + memset(msg, 0, sizeof(*msg));
> + msg->arch_data.vector = e.vector;
> + msg->arch_data.delivery_mode = e.delivery_mode;
> + msg->arch_addr_lo.dest_mode_logical = e.dest_mode_logical;
> + msg->arch_addr_lo.dmar_format = e.ir_format;
> + msg->arch_addr_lo.dmar_index_0_14 = e.ir_index_0_14;
> +}
> +
> +static int hyperv_root_ir_set_affinity(struct irq_data *data,
> + const struct cpumask *mask, bool force)
> +{
> + struct irq_data *parent = data->parent_data;
> + struct irq_cfg *cfg = irqd_cfg(data);
> + int ret;
> +
> + ret = parent->chip->irq_set_affinity(parent, mask, force);
> + if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
> + return ret;
> +
> + send_cleanup_vector(cfg);
> +
> + return 0;
> +}
> +
> +static struct irq_chip hyperv_root_ir_chip = {
> + .name = "HYPERV-ROOT-IR",
> + .irq_ack = apic_ack_irq,
> + .irq_set_affinity = hyperv_root_ir_set_affinity,
> + .irq_compose_msi_msg = hyperv_root_ir_compose_msi_msg,
> +};
> +
> +static int hyperv_root_irq_remapping_alloc(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs,
> + void *arg)
> +{
> + struct irq_alloc_info *info = arg;
> + struct irq_data *irq_data;
> + struct hyperv_root_ir_data *data;
> + int ret = 0;
> +
> + if (!info || info->type != X86_IRQ_ALLOC_TYPE_IOAPIC || nr_irqs > 1)
> + return -EINVAL;
> +
> + ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
> + if (ret < 0)
> + return ret;
> +
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
> + if (!data) {
> + irq_domain_free_irqs_common(domain, virq, nr_irqs);
> + return -ENOMEM;
> + }
> +
> + irq_data = irq_domain_get_irq_data(domain, virq);
> + if (!irq_data) {
> + kfree(data);
> + irq_domain_free_irqs_common(domain, virq, nr_irqs);
> + return -EINVAL;
> + }
> +
> + data->ioapic_id = info->devid;
> + data->is_level = info->ioapic.is_level;
> +
> + irq_data->chip = &hyperv_root_ir_chip;
> + irq_data->chip_data = data;
> +
> + return 0;
> +}
> +
> +static void hyperv_root_irq_remapping_free(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs)
> +{
> + struct irq_data *irq_data;
> + struct hyperv_root_ir_data *data;
> + struct hv_interrupt_entry *e;
> + int i;
> +
> + for (i = 0; i < nr_irqs; i++) {
> + irq_data = irq_domain_get_irq_data(domain, virq + i);
> +
> + if (irq_data && irq_data->chip_data) {
> + data = irq_data->chip_data;
> + e = &data->entry;
> +
> + if (e->source == HV_DEVICE_TYPE_IOAPIC
> + && e->ioapic_rte.as_uint64)
> + hv_unmap_ioapic_interrupt(data->ioapic_id,
> + &data->entry);
> +
> + kfree(data);
> + }
> + }
> +
> + irq_domain_free_irqs_common(domain, virq, nr_irqs);
> +}
> +
> +static const struct irq_domain_ops hyperv_root_ir_domain_ops = {
> + .select = hyperv_irq_remapping_select,
> + .alloc = hyperv_root_irq_remapping_alloc,
> + .free = hyperv_root_irq_remapping_free,
> +};
> +
> #endif
> --
> 2.20.1
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH v6 16/16] iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition
2021-02-03 15:04 ` [PATCH v6 16/16] iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition Wei Liu
2021-02-04 13:33 ` Joerg Roedel
@ 2021-02-04 17:53 ` Michael Kelley via iommu
1 sibling, 0 replies; 3+ messages in thread
From: Michael Kelley via iommu @ 2021-02-04 17:53 UTC (permalink / raw)
To: Wei Liu, Linux on Hyper-V List
Cc: Stephen Hemminger, pasha.tatashin@soleen.com, Will Deacon,
Haiyang Zhang, maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT),
Linux Kernel List, virtualization@lists.linux-foundation.org,
open list:IOMMU DRIVERS, Ingo Molnar, Borislav Petkov,
H. Peter Anvin, Nuno Das Neves, Sunil Muthuswamy, KY Srinivasan,
Vineeth Pillai, Thomas Gleixner
From: Wei Liu <wei.liu@kernel.org> Sent: Wednesday, February 3, 2021 7:05 AM
>
> Just like MSI/MSI-X, IO-APIC interrupts are remapped by Microsoft
> Hypervisor when Linux runs as the root partition. Implement an IRQ
> domain to handle mapping and unmapping of IO-APIC interrupts.
>
> Signed-off-by: Wei Liu <wei.liu@kernel.org>
> ---
> v6:
> 1. Simplify code due to changes in a previous patch.
> ---
> arch/x86/hyperv/irqdomain.c | 25 +++++
> arch/x86/include/asm/mshyperv.h | 4 +
> drivers/iommu/hyperv-iommu.c | 177 +++++++++++++++++++++++++++++++-
> 3 files changed, 203 insertions(+), 3 deletions(-)
>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-02-04 17:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20210203150435.27941-1-wei.liu@kernel.org>
2021-02-03 15:04 ` [PATCH v6 16/16] iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition Wei Liu
2021-02-04 13:33 ` Joerg Roedel
2021-02-04 17:53 ` Michael Kelley via iommu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox