From: Christoph Hellwig <hch@lst.de>
To: iommu@lists.linux.dev,
Marek Szyprowski <m.szyprowski@samsung.com>,
Robin Murphy <robin.murphy@arm.com>
Cc: Michal Hocko <mhocko@suse.com>,
David Rientjes <rientjes@google.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] dma-pool: limit DMA and DMA32 zone size pools
Date: Wed, 17 Aug 2022 08:06:47 +0200 [thread overview]
Message-ID: <20220817060647.1032426-4-hch@lst.de> (raw)
In-Reply-To: <20220817060647.1032426-1-hch@lst.de>
Limit the sizing of the atomic pools for allocations from
ZONE_DMA and ZONE_DMA32 based on the number of pages actually
present in those zones instead of the total memory.
Fixes: c84dc6e68a1d ("dma-pool: add additional coherent pools to map to gfp mask")
Reported-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
kernel/dma/pool.c | 40 +++++++++++++++++++++++++++++-----------
1 file changed, 29 insertions(+), 11 deletions(-)
diff --git a/kernel/dma/pool.c b/kernel/dma/pool.c
index 5b07b0379a501..f629c6dfd8555 100644
--- a/kernel/dma/pool.c
+++ b/kernel/dma/pool.c
@@ -193,28 +193,46 @@ static unsigned long calculate_pool_size(unsigned long zone_pages)
return max_t(unsigned long, nr_pages << PAGE_SHIFT, SZ_128K);
}
+#if defined(CONFIG_ZONE_DMA) || defined(CONFIG_ZONE_DMA32)
+static unsigned long __init nr_managed_pages(int zone_idx)
+{
+ struct pglist_data *pgdat;
+ unsigned long nr_pages = 0;
+
+ for_each_online_pgdat(pgdat)
+ nr_pages += zone_managed_pages(&pgdat->node_zones[zone_idx]);
+ return nr_pages;
+}
+#endif /* CONFIG_ZONE_DMA || CONFIG_ZONE_DMA32 */
+
static int __init dma_atomic_pool_init(void)
{
+ unsigned long nr_zone_dma_pages, nr_zone_dma32_pages;
+
+#ifdef CONFIG_ZONE_DMA
+ nr_zone_dma_pages = nr_managed_pages(ZONE_DMA);
+ if (nr_zone_dma_pages)
+ atomic_pool_dma = __dma_atomic_pool_init(
+ calculate_pool_size(nr_zone_dma_pages),
+ GFP_DMA);
+#endif
+#ifdef CONFIG_ZONE_DMA32
+ nr_zone_dma32_pages = nr_managed_pages(ZONE_DMA32);
+ if (nr_zone_dma32_pages)
+ atomic_pool_dma32 = __dma_atomic_pool_init(
+ calculate_pool_size(nr_zone_dma32_pages),
+ GFP_DMA32);
+#endif
/*
* If coherent_pool was not used on the command line, default the pool
* sizes to 128KB per 1GB of memory, min 128KB, max MAX_ORDER-1.
*/
if (!atomic_pool_size)
atomic_pool_size = calculate_pool_size(totalram_pages());
-
- INIT_WORK(&atomic_pool_work, atomic_pool_work_fn);
-
atomic_pool_kernel = __dma_atomic_pool_init(atomic_pool_size,
GFP_KERNEL);
- if (has_managed_dma()) {
- atomic_pool_dma = __dma_atomic_pool_init(atomic_pool_size,
- GFP_KERNEL | GFP_DMA);
- }
- if (IS_ENABLED(CONFIG_ZONE_DMA32)) {
- atomic_pool_dma32 = __dma_atomic_pool_init(atomic_pool_size,
- GFP_KERNEL | GFP_DMA32);
- }
+ INIT_WORK(&atomic_pool_work, atomic_pool_work_fn);
dma_atomic_pool_debugfs_init();
return 0;
}
--
2.30.2
next prev parent reply other threads:[~2022-08-17 6:06 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-17 6:06 fix dma coherent pool sizing Christoph Hellwig
2022-08-17 6:06 ` [PATCH 1/3] dma-pool: factor out a calculate_pool_size helper Christoph Hellwig
2022-08-17 12:32 ` Robin Murphy
2022-08-21 10:41 ` Christoph Hellwig
2022-08-17 6:06 ` [PATCH 2/3] dma-pool: don't return errors from dma_atomic_pool_init Christoph Hellwig
2022-08-17 12:36 ` Robin Murphy
2022-08-17 6:06 ` Christoph Hellwig [this message]
2022-08-17 12:50 ` [PATCH 3/3] dma-pool: limit DMA and DMA32 zone size pools Robin Murphy
2022-08-21 10:43 ` Christoph Hellwig
2022-08-17 12:53 ` Michal Hocko
2022-08-21 10:44 ` Christoph Hellwig
2022-08-22 8:41 ` Michal Hocko
2022-08-22 11:14 ` Christoph Hellwig
2022-08-22 12:09 ` Michal Hocko
2022-08-22 12:27 ` Christoph Hellwig
2022-08-22 14:21 ` Michal Hocko
-- strict thread matches above, loose matches on Subject: below --
2022-08-22 6:12 fix dma coherent pool sizing Christoph Hellwig
2022-08-22 6:12 ` [PATCH 3/3] dma-pool: limit DMA and DMA32 zone size pools Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220817060647.1032426-4-hch@lst.de \
--to=hch@lst.de \
--cc=iommu@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mhocko@suse.com \
--cc=rientjes@google.com \
--cc=robin.murphy@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox