From: Sairaj Kodilkar <sarunkod@amd.com>
To: <joro@8bytes.org>, <iommu@lists.linux.dev>
Cc: <suravee.suthikulpanit@amd.com>, <will@kernel.org>,
<robin.murphy@arm.com>, <vasant.hegde@amd.com>,
<sarunkod@amd.com>
Subject: [PATCH 1/4] iommu/amd: Introduce generic function to set multibit feature value
Date: Fri, 7 Mar 2025 15:28:19 +0530 [thread overview]
Message-ID: <20250307095822.2274-2-sarunkod@amd.com> (raw)
In-Reply-To: <20250307095822.2274-1-sarunkod@amd.com>
Define generic function `iommu_feature_set()` to set the values
in the feature control register and replace `iommu_set_inv_tlb_timeout()`
with it.
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
---
drivers/iommu/amd/amd_iommu_types.h | 2 +-
drivers/iommu/amd/init.c | 27 ++++++++++-----------------
2 files changed, 11 insertions(+), 18 deletions(-)
diff --git a/drivers/iommu/amd/amd_iommu_types.h b/drivers/iommu/amd/amd_iommu_types.h
index 23caea22f8dc..dcc6fbfa62e2 100644
--- a/drivers/iommu/amd/amd_iommu_types.h
+++ b/drivers/iommu/amd/amd_iommu_types.h
@@ -181,7 +181,7 @@
#define CONTROL_IRTCACHEDIS 59
#define CONTROL_SNPAVIC_EN 61
-#define CTRL_INV_TO_MASK (7 << CONTROL_INV_TIMEOUT)
+#define CTRL_INV_TO_MASK 7
#define CTRL_INV_TO_NONE 0
#define CTRL_INV_TO_1MS 1
#define CTRL_INV_TO_10MS 2
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index cb536d372b12..eaea9dc8af9d 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -412,33 +412,26 @@ static void iommu_set_device_table(struct amd_iommu *iommu)
&entry, sizeof(entry));
}
-/* Generic functions to enable/disable certain features of the IOMMU. */
-void iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
+static void iommu_feature_set(struct amd_iommu *iommu, u64 val, u64 mask, u8 shift)
{
u64 ctrl;
ctrl = readq(iommu->mmio_base + MMIO_CONTROL_OFFSET);
- ctrl |= (1ULL << bit);
+ mask <<= shift;
+ ctrl &= ~mask;
+ ctrl |= (val << shift) & mask;
writeq(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
}
-static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
+/* Generic functions to enable/disable certain features of the IOMMU. */
+void iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
{
- u64 ctrl;
-
- ctrl = readq(iommu->mmio_base + MMIO_CONTROL_OFFSET);
- ctrl &= ~(1ULL << bit);
- writeq(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
+ iommu_feature_set(iommu, 1ULL, 1ULL, bit);
}
-static void iommu_set_inv_tlb_timeout(struct amd_iommu *iommu, int timeout)
+static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
{
- u64 ctrl;
-
- ctrl = readq(iommu->mmio_base + MMIO_CONTROL_OFFSET);
- ctrl &= ~CTRL_INV_TO_MASK;
- ctrl |= (timeout << CONTROL_INV_TIMEOUT) & CTRL_INV_TO_MASK;
- writeq(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
+ iommu_feature_set(iommu, 0ULL, 1ULL, bit);
}
/* Function to enable the hardware */
@@ -2652,7 +2645,7 @@ static void iommu_init_flags(struct amd_iommu *iommu)
iommu_feature_enable(iommu, CONTROL_COHERENT_EN);
/* Set IOTLB invalidation timeout to 1s */
- iommu_set_inv_tlb_timeout(iommu, CTRL_INV_TO_1S);
+ iommu_feature_set(iommu, CTRL_INV_TO_1S, CTRL_INV_TO_MASK, CONTROL_INV_TIMEOUT);
/* Enable Enhanced Peripheral Page Request Handling */
if (check_feature(FEATURE_EPHSUP))
--
2.34.1
next prev parent reply other threads:[~2025-03-07 9:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-07 9:58 [PATCH 0/4] iommu/amd: Enable support for up to 2K interrupts per Sairaj Kodilkar
2025-03-07 9:58 ` Sairaj Kodilkar [this message]
2025-03-07 9:58 ` [PATCH 2/4] iommu/amd: Replace slab cache allocator with page allocator Sairaj Kodilkar
2025-03-07 9:58 ` [PATCH 3/4] iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro Sairaj Kodilkar
2025-03-07 9:58 ` [PATCH 4/4] iommu/amd: Enable support for up to 2K interrupts per function Sairaj Kodilkar
2025-03-13 5:41 ` [PATCH 0/4] iommu/amd: Enable support for up to 2K interrupts per Vasant Hegde
2025-03-13 11:15 ` Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250307095822.2274-2-sarunkod@amd.com \
--to=sarunkod@amd.com \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=robin.murphy@arm.com \
--cc=suravee.suthikulpanit@amd.com \
--cc=vasant.hegde@amd.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox