Linux IOMMU Development
 help / color / mirror / Atom feed
From: Pranjal Shrivastava <praan@google.com>
To: Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
	 Robin Murphy <robin.murphy@arm.com>,
	Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nicolin Chen <nicolinc@nvidia.com>,
	Mostafa Saleh <smostafa@google.com>,
	 Daniel Mentz <danielmentz@google.com>,
	iommu@lists.linux.dev,  Pranjal Shrivastava <praan@google.com>
Subject: [RFC PATCH v2 01/10] iommu/arm-smmu-v3: Refactor arm_smmu_setup_irqs
Date: Fri, 18 Apr 2025 23:34:00 +0000	[thread overview]
Message-ID: <20250418233409.3926715-2-praan@google.com> (raw)
In-Reply-To: <20250418233409.3926715-1-praan@google.com>

Refactor arm_smmu_setup_irqs by splitting it into two parts, one for
registering interrupt handlers and the other one for enabling interrupt
generation in the hardware. This refactor helps in re-initialization of
hardware interrupts as part of a subsequent patch that enables runtime
power management for the arm-smmu-v3 driver.

Signed-off-by: Pranjal Shrivastava <praan@google.com>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 54 ++++++++++++++-------
 1 file changed, 37 insertions(+), 17 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index b4c21aaed126..c295837b20a1 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -4009,12 +4009,24 @@ static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
 	}
 }
 
-static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
+static void arm_smmu_enable_irqs(struct arm_smmu_device *smmu)
 {
-	int ret, irq;
+	int ret;
 	u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
 
-	/* Disable IRQs first */
+	if (smmu->features & ARM_SMMU_FEAT_PRI)
+		irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
+
+	ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
+				      ARM_SMMU_IRQ_CTRL, ARM_SMMU_IRQ_CTRLACK);
+	if (ret)
+		dev_warn(smmu->dev, "failed to enable irqs\n");
+}
+
+static int arm_smmu_disable_irqs(struct arm_smmu_device *smmu)
+{
+	int ret;
+
 	ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
 				      ARM_SMMU_IRQ_CTRLACK);
 	if (ret) {
@@ -4022,6 +4034,19 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
 		return ret;
 	}
 
+	return 0;
+}
+
+static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
+{
+	int ret, irq;
+
+	/* Disable IRQs first */
+	ret = arm_smmu_disable_irqs(smmu);
+
+	if (ret)
+		return ret;
+
 	irq = smmu->combined_irq;
 	if (irq) {
 		/*
@@ -4038,15 +4063,6 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
 	} else
 		arm_smmu_setup_unique_irqs(smmu);
 
-	if (smmu->features & ARM_SMMU_FEAT_PRI)
-		irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
-
-	/* Enable interrupt generation on the SMMU */
-	ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
-				      ARM_SMMU_IRQ_CTRL, ARM_SMMU_IRQ_CTRLACK);
-	if (ret)
-		dev_warn(smmu->dev, "failed to enable irqs\n");
-
 	return 0;
 }
 
@@ -4189,11 +4205,8 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu)
 		}
 	}
 
-	ret = arm_smmu_setup_irqs(smmu);
-	if (ret) {
-		dev_err(smmu->dev, "failed to setup irqs\n");
-		return ret;
-	}
+	/* Enable interrupt generation on the SMMU */
+	arm_smmu_enable_irqs(smmu);
 
 	if (is_kdump_kernel())
 		enables &= ~(CR0_EVTQEN | CR0_PRIQEN);
@@ -4778,6 +4791,13 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 	/* Check for RMRs and install bypass STEs if any */
 	arm_smmu_rmr_install_bypass_ste(smmu);
 
+	/* Setup interrupt handlers */
+	ret = arm_smmu_setup_irqs(smmu);
+	if (ret) {
+		dev_err(smmu->dev, "failed to setup irqs\n");
+		goto err_free_iopf;
+	}
+
 	/* Reset the device */
 	ret = arm_smmu_device_reset(smmu);
 	if (ret)
-- 
2.49.0.805.g082f7c87e0-goog


  reply	other threads:[~2025-04-18 23:34 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-18 23:33 [RFC PATCH v2 00/10] iommu/arm-smmu-v3: Implement Runtime/System Sleep ops Pranjal Shrivastava
2025-04-18 23:34 ` Pranjal Shrivastava [this message]
2025-05-02 19:14   ` [RFC PATCH v2 01/10] iommu/arm-smmu-v3: Refactor arm_smmu_setup_irqs Nicolin Chen
2025-04-18 23:34 ` [RFC PATCH v2 02/10] iommu/arm-smmu-v3: Add a helper to drain all queues Pranjal Shrivastava
2025-05-02 19:32   ` Nicolin Chen
2025-05-05 15:14     ` Pranjal Shrivastava
2025-05-04 20:28   ` Daniel Mentz
2025-05-05 15:10     ` Pranjal Shrivastava
2025-04-18 23:34 ` [RFC PATCH v2 03/10] iommu/tegra241-cmdqv: Add a helper to drain VCMDQs Pranjal Shrivastava
2025-04-23  6:34   ` Nicolin Chen
2025-04-18 23:34 ` [RFC PATCH v2 04/10] iommu/arm-smmu-v3: Cache and restore MSI config Pranjal Shrivastava
2025-05-02 19:43   ` Nicolin Chen
2025-05-05 15:16     ` Pranjal Shrivastava
2025-04-18 23:34 ` [RFC PATCH v2 05/10] iommu/arm-smmu-v3: Implement pm_runtime & system sleep ops Pranjal Shrivastava
2025-05-04 20:29   ` Daniel Mentz
2025-05-05 15:22     ` Pranjal Shrivastava
2025-04-18 23:34 ` [RFC PATCH v2 06/10] iommu: Add a helper to check for user ownership Pranjal Shrivastava
2025-04-18 23:34 ` [RFC PATCH v2 07/10] iommu/arm-smmu-v3: Track masters with user-owned groups Pranjal Shrivastava
2025-04-18 23:34 ` [RFC PATCH v2 08/10] iommu/arm-smmu-v3: Avoid suspend when user owns DMA Pranjal Shrivastava
2025-05-04 20:28   ` Daniel Mentz
2025-05-05 15:22     ` Pranjal Shrivastava
2025-04-18 23:34 ` [RFC PATCH v2 09/10] iommu/arm-smmu-v3: Enable pm_runtime and setup devlinks Pranjal Shrivastava
2025-04-18 23:34 ` [RFC PATCH v2 10/10] iommu/arm-smmu-v3: Invoke pm_runtime before hw access Pranjal Shrivastava
2025-05-04 20:29   ` Daniel Mentz
2025-05-05 16:10     ` Pranjal Shrivastava

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250418233409.3926715-2-praan@google.com \
    --to=praan@google.com \
    --cc=danielmentz@google.com \
    --cc=iommu@lists.linux.dev \
    --cc=jgg@ziepe.ca \
    --cc=joro@8bytes.org \
    --cc=nicolinc@nvidia.com \
    --cc=robin.murphy@arm.com \
    --cc=smostafa@google.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox