From: Jason Gunthorpe <jgg@nvidia.com>
To: iommu@lists.linux.dev, Joerg Roedel <joro@8bytes.org>,
linux-arm-kernel@lists.infradead.org,
Robin Murphy <robin.murphy@arm.com>,
Will Deacon <will@kernel.org>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>,
Michael Shavit <mshavit@google.com>,
Nicolin Chen <nicolinc@nvidia.com>
Subject: [PATCH 26/27] iommu/arm-smmu-v3: Allow a PASID to be set when RID is IDENTITY/BLOCKED
Date: Wed, 11 Oct 2023 20:26:02 -0300 [thread overview]
Message-ID: <26-v1-afbb86647bbd+5-smmuv3_newapi_p2_jgg@nvidia.com> (raw)
In-Reply-To: <0-v1-afbb86647bbd+5-smmuv3_newapi_p2_jgg@nvidia.com>
If the STE doesn't point to the CD table we can upgrade it by
reprogramming the STE with the appropriate S1DSS. We may also need to turn
on ATS at the same time.
Keep track if the installed STE is pointing at the cd_table and the ATS
state to trigger this path.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
---
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 57 +++++++++++++++++++--
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 6 ++-
2 files changed, 56 insertions(+), 7 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 83d288fef51249..8eef125018d082 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2360,6 +2360,13 @@ static void arm_smmu_install_ste_for_dev(struct arm_smmu_master *master,
int i, j;
struct arm_smmu_device *smmu = master->smmu;
+ master->cd_table.in_ste =
+ FIELD_GET(STRTAB_STE_0_CFG, le64_to_cpu(target->data[0])) ==
+ STRTAB_STE_0_CFG_S1_TRANS;
+ master->ste_ats_enabled =
+ FIELD_GET(STRTAB_STE_1_EATS, le64_to_cpu(target->data[1])) ==
+ STRTAB_STE_1_EATS_TRANS;
+
for (i = 0; i < master->num_streams; ++i) {
u32 sid = master->streams[i].id;
struct arm_smmu_ste *step =
@@ -2690,21 +2697,48 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
return 0;
}
+static void arm_smmu_update_ste(struct arm_smmu_master *master,
+ struct iommu_domain *sid_domain,
+ bool want_ats)
+{
+ unsigned int s1dss = STRTAB_STE_1_S1DSS_TERMINATE;
+ struct arm_smmu_ste ste;
+
+ if (master->cd_table.in_ste && master->ste_ats_enabled == want_ats)
+ return;
+
+ if (sid_domain->type == IOMMU_DOMAIN_IDENTITY)
+ s1dss = STRTAB_STE_1_S1DSS_BYPASS;
+ else
+ WARN_ON(sid_domain->type != IOMMU_DOMAIN_BLOCKED);
+
+ /*
+ * Change the STE into a cdtable one with SID IDENTITY/BLOCKED behavior
+ * using s1dss if necessary. The cd_table is already installed then
+ * the S1DSS is correct and this will just update the EATS. Otherwise
+ * it installs the entire thing. This will be hitless.
+ */
+ arm_smmu_make_cdtable_ste(&ste, master, &master->cd_table, want_ats,
+ s1dss);
+ arm_smmu_install_ste_for_dev(master, &ste);
+}
+
int arm_smmu_set_pasid(struct arm_smmu_master *master,
struct arm_smmu_domain *smmu_domain, ioasid_t id,
const struct arm_smmu_cd *cd)
{
- struct arm_smmu_domain *old_smmu_domain =
- to_smmu_domain_safe(iommu_get_domain_for_dev(master->dev));
+ struct iommu_domain *sid_domain = iommu_get_domain_for_dev(master->dev);
struct arm_smmu_cd *cdptr;
struct attach_state state;
int ret;
- if (smmu_domain->smmu != master->smmu)
+ if (smmu_domain->smmu != master->smmu || id == IOMMU_NO_PASID)
return -EINVAL;
- if (!old_smmu_domain || !master->cd_table.used_sid)
- return -ENODEV;
+ if (!master->cd_table.in_ste &&
+ sid_domain->type != IOMMU_DOMAIN_IDENTITY &&
+ sid_domain->type != IOMMU_DOMAIN_BLOCKED)
+ return -EINVAL;
cdptr = arm_smmu_get_cd_ptr(master, id);
if (!cdptr)
@@ -2716,6 +2750,7 @@ int arm_smmu_set_pasid(struct arm_smmu_master *master,
goto out_unlock;
arm_smmu_write_cd_entry(master, id, cdptr, cd);
+ arm_smmu_update_ste(master, sid_domain, state.want_ats);
arm_smmu_attach_commit(
master,
@@ -2733,6 +2768,7 @@ static void arm_smmu_remove_dev_pasid(struct device *dev, ioasid_t pasid)
struct arm_smmu_master *master = dev_iommu_priv_get(dev);
struct arm_smmu_domain *smmu_domain;
struct iommu_domain *domain;
+ bool last_ssid = master->cd_table.used_ssids == 1;
domain = iommu_get_domain_for_dev_pasid(dev, pasid, IOMMU_DOMAIN_SVA);
if (WARN_ON(IS_ERR(domain)) || !domain)
@@ -2744,6 +2780,17 @@ static void arm_smmu_remove_dev_pasid(struct device *dev, ioasid_t pasid)
arm_smmu_remove_master_domain(master, smmu_domain, pasid);
arm_smmu_clear_cd(master, pasid);
mutex_unlock(&master->smmu->asid_lock);
+
+ /*
+ * When the last user of the CD table goes away downgrade the STE back
+ * to a non-cd_table one.
+ */
+ if (last_ssid && !master->cd_table.used_sid) {
+ struct iommu_domain *sid_domain =
+ iommu_get_domain_for_dev(master->dev);
+
+ sid_domain->ops->attach_dev(sid_domain, master->dev);
+ }
}
static void arm_smmu_attach_dev_ste(struct device *dev,
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
index 28a03bb3d6d3de..5cb3b602b6baf2 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
@@ -600,7 +600,8 @@ struct arm_smmu_ctx_desc_cfg {
struct arm_smmu_l1_ctx_desc *l1_desc;
unsigned int num_l1_ents;
unsigned int used_ssids;
- bool used_sid;
+ u8 used_sid;
+ u8 in_ste;
u8 s1fmt;
/* log2 of the maximum number of CDs supported by this table */
u8 s1cdmax;
@@ -708,7 +709,8 @@ struct arm_smmu_master {
/* Locked by the iommu core using the group mutex */
struct arm_smmu_ctx_desc_cfg cd_table;
unsigned int num_streams;
- bool ats_enabled;
+ bool ats_enabled : 1;
+ bool ste_ats_enabled : 1;
bool stall_enabled;
bool sva_enabled;
bool iopf_enabled;
--
2.42.0
next prev parent reply other threads:[~2023-10-11 23:26 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-11 23:25 [PATCH 00/27] Update SMMUv3 to the modern iommu API (part 2/2) Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 01/27] iommu/arm-smmu-v3: Check that the RID domain is S1 in SVA Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 02/27] iommu/arm-smmu-v3: Do not allow a SVA domain to be set on the wrong PASID Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 03/27] iommu/arm-smmu-v3: Do not ATC invalidate the entire domain Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 04/27] iommu/arm-smmu-v3: Add a type for the CD entry Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 05/27] iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry_step() Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 06/27] iommu/arm-smmu-v3: Consolidate clearing a CD table entry Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 07/27] iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 08/27] iommu/arm-smmu-v3: Move allocation of the cdtable into arm_smmu_get_cd_ptr() Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 09/27] iommu/arm-smmu-v3: Allocate the CD table entry in advance Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 10/27] iommu/arm-smmu-v3: Move the CD generation for SVA into a function Jason Gunthorpe
2023-10-24 4:12 ` Michael Shavit
2023-10-24 11:52 ` Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 11/27] iommu/arm-smmu-v3: Lift CD programming out of the SVA notifier code Jason Gunthorpe
2023-10-24 6:34 ` Michael Shavit
2023-10-24 23:46 ` Jason Gunthorpe
2023-10-26 7:31 ` Michael Shavit
2023-10-26 14:11 ` Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 12/27] iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd() Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 13/27] iommu/arm-smmu-v3: Make smmu_domain->devices into an allocated list Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 14/27] iommu/arm-smmu-v3: Make changing domains be hitless for ATS Jason Gunthorpe
2023-10-24 8:09 ` Michael Shavit
2023-10-24 23:56 ` Jason Gunthorpe
2023-10-26 7:00 ` Michael Shavit
2023-10-26 14:38 ` Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 15/27] iommu/arm-smmu-v3: Add ssid to struct arm_smmu_master_domain Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 16/27] iommu/arm-smmu-v3: Keep track of valid CD entries in the cd_table Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 17/27] iommu/arm-smmu-v3: Thread SSID through the arm_smmu_attach_*() interface Jason Gunthorpe
2023-10-25 14:01 ` Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 18/27] iommu/arm-smmu-v3: Make SVA allocate a normal arm_smmu_domain Jason Gunthorpe
2023-10-24 8:58 ` Michael Shavit
2023-10-24 13:05 ` Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 19/27] iommu/arm-smmu-v3: Keep track of arm_smmu_master_domain for SVA Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 20/27] iommu: Add ops->domain_alloc_sva() Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 21/27] iommu/arm-smmu-v3: Put the SVA mmu notifier in the smmu_domain Jason Gunthorpe
2023-10-25 13:56 ` Jason Gunthorpe
2023-10-25 16:23 ` Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 22/27] iommu/arm-smmu-v3: Consolidate freeing the ASID/VMID Jason Gunthorpe
2023-10-11 23:25 ` [PATCH 23/27] iommu/arm-smmu-v3: Move the arm_smmu_asid_xa to per-smmu like vmid Jason Gunthorpe
2023-10-11 23:26 ` [PATCH 24/27] iommu/arm-smmu-v3: Bring back SVA BTM support Jason Gunthorpe
2023-10-11 23:26 ` [PATCH 25/27] iommu/arm-smmu-v3: Allow IDENTITY/BLOCKED to be set while PASID is used Jason Gunthorpe
2023-10-25 15:10 ` Jason Gunthorpe
2023-10-11 23:26 ` Jason Gunthorpe [this message]
2023-10-11 23:26 ` [PATCH 27/27] iommu/arm-smmu-v3: Allow setting a S1 domain to a PASID Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=26-v1-afbb86647bbd+5-smmuv3_newapi_p2_jgg@nvidia.com \
--to=jgg@nvidia.com \
--cc=iommu@lists.linux.dev \
--cc=jean-philippe@linaro.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mshavit@google.com \
--cc=nicolinc@nvidia.com \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox