* Re: [PATCH v2] Documentation: Fix driver-api typos
2025-08-14 18:43 ` [PATCH v2] Documentation: Fix driver-api typos Ranganath V N
@ 2025-08-14 18:52 ` Randy Dunlap
2025-08-14 19:57 ` Jonathan Corbet
1 sibling, 0 replies; 3+ messages in thread
From: Randy Dunlap @ 2025-08-14 18:52 UTC (permalink / raw)
To: Ranganath V N, alison.schofield
Cc: alim.akhtar, corbet, dave, linux-cxl, linux-doc,
linux-kernel-mentees, linux-kernel, linux-samsung-soc, rafael,
skhan, vishal.l.verma, linux-kernel-mentees
On 8/14/25 11:43 AM, Ranganath V N wrote:
> Corrected a few spelling mistakes
>
> v2:
> * corrected as per suggestions.
> * improved the phrasing.
>
> functionalty ==> functionality
> in Documentation/driver-api/cxl/devices/device-types.rst
>
> adjascent ==> adjacent
> in Documentation/driver-api/cxl/platform/example-configurations/one-dev-per-hb.rst
>
> succeessful ==> successful
> in Documentation/driver-api/thermal/exynos_thermal_emulation.rst
>
> Signed-off-by: Ranganath V N <vnranganath.20@gmail.com>
Looks good. Thanks.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
> ---
> .../driver-api/cxl/devices/device-types.rst | 2 +-
> .../example-configurations/one-dev-per-hb.rst | 2 +-
> .../thermal/exynos_thermal_emulation.rst | 14 +++++++-------
> 3 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/driver-api/cxl/devices/device-types.rst b/Documentation/driver-api/cxl/devices/device-types.rst
> index 923f5d89bc04..7f69dfa4509b 100644
> --- a/Documentation/driver-api/cxl/devices/device-types.rst
> +++ b/Documentation/driver-api/cxl/devices/device-types.rst
> @@ -22,7 +22,7 @@ The basic interaction protocol, similar to PCIe configuration mechanisms.
> Typically used for initialization, configuration, and I/O access for anything
> other than memory (CXL.mem) or cache (CXL.cache) operations.
>
> -The Linux CXL driver exposes access to .io functionalty via the various sysfs
> +The Linux CXL driver exposes access to .io functionality via the various sysfs
> interfaces and /dev/cxl/ devices (which exposes direct access to device
> mailboxes).
>
> diff --git a/Documentation/driver-api/cxl/platform/example-configurations/one-dev-per-hb.rst b/Documentation/driver-api/cxl/platform/example-configurations/one-dev-per-hb.rst
> index aebda0eb3e17..a4c3fb51ea7d 100644
> --- a/Documentation/driver-api/cxl/platform/example-configurations/one-dev-per-hb.rst
> +++ b/Documentation/driver-api/cxl/platform/example-configurations/one-dev-per-hb.rst
> @@ -10,7 +10,7 @@ has a single CXL memory expander with a 4GB of memory.
> Things to note:
>
> * Cross-Bridge interleave is not being used.
> -* The expanders are in two separate but adjascent memory regions.
> +* The expanders are in two separate but adjacent memory regions.
> * This CEDT/SRAT describes one node per device
> * The expanders have the same performance and will be in the same memory tier.
>
> diff --git a/Documentation/driver-api/thermal/exynos_thermal_emulation.rst b/Documentation/driver-api/thermal/exynos_thermal_emulation.rst
> index c21d10838bc5..c679502f01c7 100644
> --- a/Documentation/driver-api/thermal/exynos_thermal_emulation.rst
> +++ b/Documentation/driver-api/thermal/exynos_thermal_emulation.rst
> @@ -28,13 +28,13 @@ changed into it.
> delay of changing temperature. However, this node only uses same delay
> of real sensing time, 938us.)
>
> -Exynos emulation mode requires synchronous of value changing and
> -enabling. It means when you want to update the any value of delay or
> -next temperature, then you have to enable emulation mode at the same
> -time. (Or you have to keep the mode enabling.) If you don't, it fails to
> -change the value to updated one and just use last succeessful value
> -repeatedly. That's why this node gives users the right to change
> -termerpature only. Just one interface makes it more simply to use.
> +Exynos emulation mode requires that value changes and enabling are performed
> +synchronously. This means that when you want to update any value, such as the
> +delay or the next temperature, you must enable emulation mode at the same
> +time (or keep the mode enabled). If you do not, the value will fail to update
> +and the last successful value will continue to be used. For this reason,
> +this node only allows users to change the temperature. Providing a single
> +interface makes it simpler to use.
>
> Disabling emulation mode only requires writing value 0 to sysfs node.
>
--
~Randy
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] Documentation: Fix driver-api typos
2025-08-14 18:43 ` [PATCH v2] Documentation: Fix driver-api typos Ranganath V N
2025-08-14 18:52 ` Randy Dunlap
@ 2025-08-14 19:57 ` Jonathan Corbet
1 sibling, 0 replies; 3+ messages in thread
From: Jonathan Corbet @ 2025-08-14 19:57 UTC (permalink / raw)
To: Ranganath V N, alison.schofield
Cc: alim.akhtar, dave, linux-cxl, linux-doc, linux-kernel-mentees,
linux-kernel, linux-samsung-soc, rafael, skhan, vishal.l.verma,
vnranganath.20, linux-kernel-mentees
Ranganath V N <vnranganath.20@gmail.com> writes:
> Corrected a few spelling mistakes
>
> v2:
> * corrected as per suggestions.
> * improved the phrasing.
For future reference, this information should go below the "---" line so
that the person applying the patch does not have to edit it out. I can
take care of it this time, no need to resend.
Thanks,
jon
^ permalink raw reply [flat|nested] 3+ messages in thread