[PATCH v3 0/2] add support for Aosong AM2320

[PATCH v3 0/2] add support for Aosong AM2320

[Nicolás Antinori]

The AM2320 is fully compatible with the AM2315 sensor in terms of I2C
communication protocol and measurement conversions.

This patch series adds am2320 to the i2c_device_id table, creates
of_device_id table and adds both am2315 and am2320 to
trivial-devices.yml dt bindings.

v3:
- Added "aosong,am2315" and "aosong,am2320" to trivial-devices.yml.
- Added of_device_id table.
- Replaced using a constant for driver's name with chip_info struct.
- Separated code changes and dt-bindings changes in two commits.

v2: Link [2]
 - Generalized KConfig description text.

v1: Link [1]

[1] https://lore.kernel.org/all/20260805183733.1000550-1-nico.antinori.7@gmail.com/T/#u
[2] https://lore.kernel.org/all/20260810183337.451812-1-nico.antinori.7@gmail.com/T/#u

Nicolás Antinori (2):
  dt-bindings: trivial-devices: add Aosong AM2315 and AM2320 chips
  iio: humidity: am2315: add support for am2320

 .../devicetree/bindings/trivial-devices.yaml  |  2 ++
 drivers/iio/humidity/Kconfig                  |  8 +++--
 drivers/iio/humidity/am2315.c                 | 34 ++++++++++++++++---
 3 files changed, 36 insertions(+), 8 deletions(-)

--
2.47.3

[PATCH v3 1/2] dt-bindings: trivial-devices: add Aosong AM2315 and AM2320 chips

[Nicolás Antinori]

Aosong AM2315 and AM2320 are temperature and humidity sensors that do
not require configuration.

Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
---
 Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 435c4baab436..92b757579eef 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -62,6 +62,8 @@ properties:
             # Aosong temperature & humidity sensors with I2C interface
           - aosong,aht10
           - aosong,aht20
+          - aosong,am2315
+          - aosong,am2320
           - aosong,dht20
             # Arduino microcontroller interface over SPI on UnoQ board
           - arduino,unoq-mcu
--
2.47.3

Re: [PATCH v3 1/2] dt-bindings: trivial-devices: add Aosong AM2315 and AM2320 chips

[Krzysztof Kozlowski]

On Fri, Aug 14, 2026 at 02:50:19PM -0300, Nicolás Antinori wrote:
> Aosong AM2315 and AM2320 are temperature and humidity sensors that do
> not require configuration.
> 
> Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
> ---
>  Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
>  1 file changed, 2 insertions(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

[PATCH v3 2/2] iio: humidity: am2315: add support for am2320

[Nicolás Antinori]

The AM2320 is fully compatible with the AM2315 sensor in terms of I2C
communication protocol and measurement conversions.

Add the "am2320" entry to the i2c_device_id table and create
of_device_id table.

Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
---
 drivers/iio/humidity/Kconfig  |  8 +++++---
 drivers/iio/humidity/am2315.c | 34 +++++++++++++++++++++++++++++-----
 2 files changed, 34 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 54f11f000b6f..13e267943f67 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -5,13 +5,15 @@
 menu "Humidity sensors"

 config AM2315
-	tristate "Aosong AM2315 relative humidity and temperature sensor"
+	tristate "Aosong AM2315 and similar relative humidity and temperature sensor"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	  If you say yes here you get support for the Aosong AM2315
-	  relative humidity and ambient temperature sensor.
+	  If you say yes here you get support for the Aosong relative
+	  humidity and ambient temperature sensors:
+	  - AM2315
+	  - AM2320

 	  This driver can also be built as a module. If so, the module will
 	  be called am2315.
diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c
index f29baa251f9f..37491416076c 100644
--- a/drivers/iio/humidity/am2315.c
+++ b/drivers/iio/humidity/am2315.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Aosong AM2315 relative humidity and temperature
+ * Aosong AM2315 and similar relative humidity and temperature
  *
  * Copyright (c) 2016, Intel Corporation.
  *
@@ -27,7 +27,17 @@
 #define AM2315_TEMP_OFFSET			4
 #define AM2315_ALL_CHANNEL_MASK			GENMASK(1, 0)

-#define AM2315_DRIVER_NAME			"am2315"
+struct am2315_chip_info {
+	const char *name;
+};
+
+static const struct am2315_chip_info am2315_chip_info = {
+	.name = "am2315",
+};
+
+static const struct am2315_chip_info am2320_chip_info = {
+	.name = "am2320",
+};

 struct am2315_data {
 	struct i2c_client *client;
@@ -220,9 +230,14 @@ static const struct iio_info am2315_info = {
 static int am2315_probe(struct i2c_client *client)
 {
 	int ret;
+	const struct am2315_chip_info *chip_info;
 	struct iio_dev *indio_dev;
 	struct am2315_data *data;

+	chip_info = i2c_get_match_data(client);
+	if (!chip_info)
+		return -EINVAL;
+
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -233,7 +248,7 @@ static int am2315_probe(struct i2c_client *client)
 	mutex_init(&data->lock);

 	indio_dev->info = &am2315_info;
-	indio_dev->name = AM2315_DRIVER_NAME;
+	indio_dev->name = chip_info->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = am2315_channels;
 	indio_dev->num_channels = ARRAY_SIZE(am2315_channels);
@@ -249,8 +264,16 @@ static int am2315_probe(struct i2c_client *client)
 	return devm_iio_device_register(&client->dev, indio_dev);
 }

+static const struct of_device_id am2315_of_match[] = {
+	{ .compatible = "aosong,am2315", .data = &am2315_chip_info },
+	{ .compatible = "aosong,am2320", .data = &am2320_chip_info },
+	{}
+};
+MODULE_DEVICE_TABLE(of, am2315_of_match);
+
 static const struct i2c_device_id am2315_i2c_id[] = {
-	{ .name = "am2315" },
+	{ .name = "am2315", .driver_data = (kernel_ulong_t)&am2315_chip_info },
+	{ .name = "am2320", .driver_data = (kernel_ulong_t)&am2320_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, am2315_i2c_id);
@@ -258,6 +281,7 @@ MODULE_DEVICE_TABLE(i2c, am2315_i2c_id);
 static struct i2c_driver am2315_driver = {
 	.driver = {
 		.name = "am2315",
+		.of_match_table = am2315_of_match,
 	},
 	.probe =        am2315_probe,
 	.id_table =         am2315_i2c_id,
@@ -266,5 +290,5 @@ static struct i2c_driver am2315_driver = {
 module_i2c_driver(am2315_driver);

 MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>");
-MODULE_DESCRIPTION("Aosong AM2315 relative humidity and temperature");
+MODULE_DESCRIPTION("Aosong AM2315 and similar relative humidity and temperature");
 MODULE_LICENSE("GPL v2");
--
2.47.3

Re: [PATCH v3 2/2] iio: humidity: am2315: add support for am2320

[Andy Shevchenko]

On Fri, Aug 14, 2026 at 02:50:20PM -0300, Nicolás Antinori wrote:
> The AM2320 is fully compatible with the AM2315 sensor in terms of I2C
> communication protocol and measurement conversions.
> 
> Add the "am2320" entry to the i2c_device_id table and create
> of_device_id table.

...

> +	chip_info = i2c_get_match_data(client);
> +	if (!chip_info)
> +		return -EINVAL;

-ENODATA

...

> +static const struct of_device_id am2315_of_match[] = {
> +	{ .compatible = "aosong,am2315", .data = &am2315_chip_info },
> +	{ .compatible = "aosong,am2320", .data = &am2320_chip_info },
> +	{}

Same style as elsewhere, id est

	{ }

> +};

With the above being addressed,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 2/2] iio: humidity: am2315: add support for am2320

[Marcelo Schmitt]

On 08/14, Nicolás Antinori wrote:
> The AM2320 is fully compatible with the AM2315 sensor in terms of I2C
> communication protocol and measurement conversions.
> 
> Add the "am2320" entry to the i2c_device_id table and create
> of_device_id table.
> 
> Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
> ---
Some optional suggestions for the commit message:

The AM2320 design is fully compatible with AM2315 in terms of I2C
communication protocol and measurement conversions.

Add the "am2320" entry to the i2c_device_id table and register a
of_device_id table to match against devices declared in device tree.


I see nothing else to improve besides what Andy already mentioned.
With those sorted out,
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>