[PATCH AUTOSEL 5.15 22/69] selftests: mlxsw: resource_scale: Allow skipping a test

[PATCH AUTOSEL 5.15 22/69] selftests: mlxsw: resource_scale: Allow skipping a test

[Sasha Levin]

From: Petr Machata <petrm@nvidia.com>

[ Upstream commit 8cad339db339a39cb82b1188e4be4070a433abac ]

The scale tests are currently testing two things: that some number of
instances of a given resource can actually be created; and that when an
attempt is made to create more than the supported amount, the failures are
noted and handled gracefully.

Sometimes the scale test depends on more than one resource. In particular,
a following patch will add a RIF counter scale test, which depends on the
number of RIF counters that can be bound, and also on the number of RIFs
that can be created.

When the test is limited by the auxiliary resource and not by the primary
one, there's no point trying to run the overflow test, because it would be
testing exhaustion of the wrong resource.

To support this use case, when the $test_get_target yields 0, skip the test
instead.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh | 5 +++++
 .../selftests/drivers/net/mlxsw/spectrum/resource_scale.sh   | 4 ++++
 2 files changed, 9 insertions(+)

diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
index 50654f8a8c37..14b7a080312b 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
@@ -39,6 +39,11 @@ for current_test in ${TESTS:-$ALL_TESTS}; do
 	for should_fail in 0 1; do
 		RET=0
 		target=$(${current_test}_get_target "$should_fail")
+		if ((target == 0)); then
+			log_test_skip "'$current_test' should_fail=$should_fail test"
+			continue
+		fi
+
 		${current_test}_setup_prepare
 		setup_wait $num_netifs
 		${current_test}_test "$target" "$should_fail"
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
index b9b8274643de..4dafd86eb417 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
@@ -41,6 +41,10 @@ for current_test in ${TESTS:-$ALL_TESTS}; do
 		for should_fail in 0 1; do
 			RET=0
 			target=$(${current_test}_get_target "$should_fail")
+			if ((target == 0)); then
+				log_test_skip "'$current_test' [$profile] should_fail=$should_fail test"
+				continue
+			fi
 			${current_test}_setup_prepare
 			setup_wait $num_netifs
 			${current_test}_test "$target" "$should_fail"
-- 
2.35.1

[PATCH AUTOSEL 5.15 39/69] kselftests: Enable the echo command to print newlines in Makefile

[Sasha Levin]

From: Gautam <gautammenghani201@gmail.com>

[ Upstream commit 3297a4df805d4263506b6dfec4d1bbeff8862dd8 ]

In the install section of the main Makefile of kselftests, the echo
command is used with -n flag, which disables the printing of new line
due to which the output contains "\n" chars as follows:

  Emit Tests for alsa\nSkipping non-existent dir: arm64
  Emit Tests for breakpoints\nEmit Tests for capabilities\n

This patch fixes the above bug by using the -e flag.

Signed-off-by: Gautam <gautammenghani201@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 14206d1d1efe..5fe0bd7e05d8 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -235,7 +235,7 @@ ifdef INSTALL_PATH
 	for TARGET in $(TARGETS); do \
 		BUILD_TARGET=$$BUILD/$$TARGET;	\
 		[ ! -d $(INSTALL_PATH)/$$TARGET ] && echo "Skipping non-existent dir: $$TARGET" && continue; \
-		echo -n "Emit Tests for $$TARGET\n"; \
+		echo -ne "Emit Tests for $$TARGET\n"; \
 		$(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET COLLECTION=$$TARGET \
 			-C $$TARGET emit_tests >> $(TEST_LIST); \
 	done;
-- 
2.35.1

[PATCH AUTOSEL 5.15 59/69] bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test

[Sasha Levin]

From: Jie2x Zhou <jie2x.zhou@intel.com>

[ Upstream commit f664f9c6b4a1bb9a10af812df0fbbf6aac28fcc6 ]

Before change:

  selftests: bpf: test_xdp_veth.sh
  Couldn't retrieve pinned program '/sys/fs/bpf/test_xdp_veth/progs/redirect_map_0': No such file or directory
  selftests: xdp_veth [SKIP]
  ok 20 selftests: bpf: test_xdp_veth.sh # SKIP

After change:

  PING 10.1.1.33 (10.1.1.33) 56(84) bytes of data.
  64 bytes from 10.1.1.33: icmp_seq=1 ttl=64 time=0.320 ms
  --- 10.1.1.33 ping statistics ---
  1 packets transmitted, 1 received, 0% packet loss, time 0ms
  rtt min/avg/max/mdev = 0.320/0.320/0.320/0.000 ms
  selftests: xdp_veth [PASS]

For the test case, the following can be found:

  ls /sys/fs/bpf/test_xdp_veth/progs/redirect_map_0
  ls: cannot access '/sys/fs/bpf/test_xdp_veth/progs/redirect_map_0': No such file or directory
  ls /sys/fs/bpf/test_xdp_veth/progs/
  xdp_redirect_map_0  xdp_redirect_map_1  xdp_redirect_map_2

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220719082430.9916-1-jie2x.zhou@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_xdp_veth.sh | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_xdp_veth.sh b/tools/testing/selftests/bpf/test_xdp_veth.sh
index a3a1eaee26ea..73a9e1b22290 100755
--- a/tools/testing/selftests/bpf/test_xdp_veth.sh
+++ b/tools/testing/selftests/bpf/test_xdp_veth.sh
@@ -103,9 +103,9 @@ bpftool prog loadall \
 bpftool map update pinned $BPF_DIR/maps/tx_port key 0 0 0 0 value 122 0 0 0
 bpftool map update pinned $BPF_DIR/maps/tx_port key 1 0 0 0 value 133 0 0 0
 bpftool map update pinned $BPF_DIR/maps/tx_port key 2 0 0 0 value 111 0 0 0
-ip link set dev veth1 xdp pinned $BPF_DIR/progs/redirect_map_0
-ip link set dev veth2 xdp pinned $BPF_DIR/progs/redirect_map_1
-ip link set dev veth3 xdp pinned $BPF_DIR/progs/redirect_map_2
+ip link set dev veth1 xdp pinned $BPF_DIR/progs/xdp_redirect_map_0
+ip link set dev veth2 xdp pinned $BPF_DIR/progs/xdp_redirect_map_1
+ip link set dev veth3 xdp pinned $BPF_DIR/progs/xdp_redirect_map_2
 
 ip -n ns1 link set dev veth11 xdp obj xdp_dummy.o sec xdp
 ip -n ns2 link set dev veth22 xdp obj xdp_tx.o sec xdp
-- 
2.35.1