* [PATCH v3 1/7] kselftest/alsa: pcm - Drop recent coverage improvement changes
2022-12-02 0:17 [PATCH v3 0/7] kselftest/alsa: pcm-test improvements Mark Brown
@ 2022-12-02 0:17 ` Mark Brown
2022-12-02 0:17 ` [PATCH v3 2/7] kselftest/alsa: pcm - move more configuration to configuration files Mark Brown
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2022-12-02 0:17 UTC (permalink / raw)
To: Takashi Iwai, Jaroslav Kysela, Shuah Khan
Cc: alsa-devel, linux-kselftest, Mark Brown
In preparation to adopting a better, more comprehensive approach to
adding the coverage that was just added using some changes from Jaroslav
which were sent at the same time the recently added improvements were
being applied drop what was applied. This reverts:
7d721baea138 "kselftest/alsa: Add more coverage of sample rates and channel counts"
ee12040dd53a "kselftest/alsa: Provide more meaningful names for tests"
ae95efd9754c "kselftest/alsa: Don't any configuration in the sample config"
8370d9b00c92 Revert "kselftest/alsa: Report failures to set the requested channels as skips"
f944f8b539ea "kselftest/alsa: Report failures to set the requested sample rate as skips"
22eeb8f531c1 "kselftest/alsa: Refactor pcm-test to list the tests to run in a struct"
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf | 35 ++++----
tools/testing/selftests/alsa/pcm-test.c | 88 ++++++-------------
2 files changed, 42 insertions(+), 81 deletions(-)
diff --git a/tools/testing/selftests/alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf b/tools/testing/selftests/alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf
index 9eca985e0c08..0a83f35d43eb 100644
--- a/tools/testing/selftests/alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf
+++ b/tools/testing/selftests/alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf
@@ -39,25 +39,22 @@ card.hda {
#
pcm.0.0 {
PLAYBACK {
- #
- # Uncomment to override values for specific tests
- #
- #test_name1 {
- # access RW_INTERLEAVED
- # format S16_LE
- # rate 48000
- # channels 2
- # period_size 512
- # buffer_size 4096
- #}
- #test_name2 {
- # access RW_INTERLEAVED
- # format S16_LE
- # rate 48000
- # channels 2
- # period_size 24000
- # buffer_size 192000
- #}
+ test.time1 {
+ access RW_INTERLEAVED # can be omitted - default
+ format S16_LE # can be omitted - default
+ rate 48000 # can be omitted - default
+ channels 2 # can be omitted - default
+ period_size 512
+ buffer_size 4096
+ }
+ test.time2 {
+ access RW_INTERLEAVED
+ format S16_LE
+ rate 48000
+ channels 2
+ period_size 24000
+ buffer_size 192000
+ }
}
CAPTURE {
# use default tests, check for the presence
diff --git a/tools/testing/selftests/alsa/pcm-test.c b/tools/testing/selftests/alsa/pcm-test.c
index f293c7d81009..6e7dfc395b98 100644
--- a/tools/testing/selftests/alsa/pcm-test.c
+++ b/tools/testing/selftests/alsa/pcm-test.c
@@ -37,15 +37,6 @@ struct pcm_data *pcm_list = NULL;
int num_missing = 0;
struct pcm_data *pcm_missing = NULL;
-struct time_test_def {
- const char *cfg_prefix;
- const char *format;
- long rate;
- long channels;
- long period_size;
- long buffer_size;
-};
-
void timestamp_now(timestamp_t *tstamp)
{
if (clock_gettime(CLOCK_MONOTONIC_RAW, tstamp))
@@ -229,7 +220,9 @@ static void find_pcms(void)
}
static void test_pcm_time1(struct pcm_data *data,
- const struct time_test_def *test)
+ const char *cfg_prefix, const char *sformat,
+ long srate, long schannels,
+ long speriod_size, long sbuffer_size)
{
char name[64], key[128], msg[256];
const char *cs;
@@ -241,32 +234,30 @@ static void test_pcm_time1(struct pcm_data *data,
snd_pcm_sframes_t frames;
long long ms;
long rate, channels, period_size, buffer_size;
- unsigned int rchannels;
unsigned int rrate;
snd_pcm_uframes_t rperiod_size, rbuffer_size, start_threshold;
timestamp_t tstamp;
bool pass = false, automatic = true;
snd_pcm_hw_params_t *hw_params;
snd_pcm_sw_params_t *sw_params;
- bool skip = false;
snd_pcm_hw_params_alloca(&hw_params);
snd_pcm_sw_params_alloca(&sw_params);
- cs = conf_get_string(data->pcm_config, test->cfg_prefix, "format", test->format);
+ cs = conf_get_string(data->pcm_config, cfg_prefix, "format", sformat);
format = snd_pcm_format_value(cs);
if (format == SND_PCM_FORMAT_UNKNOWN)
ksft_exit_fail_msg("Wrong format '%s'\n", cs);
- rate = conf_get_long(data->pcm_config, test->cfg_prefix, "rate", test->rate);
- channels = conf_get_long(data->pcm_config, test->cfg_prefix, "channels", test->channels);
- period_size = conf_get_long(data->pcm_config, test->cfg_prefix, "period_size", test->period_size);
- buffer_size = conf_get_long(data->pcm_config, test->cfg_prefix, "buffer_size", test->buffer_size);
+ rate = conf_get_long(data->pcm_config, cfg_prefix, "rate", srate);
+ channels = conf_get_long(data->pcm_config, cfg_prefix, "channels", schannels);
+ period_size = conf_get_long(data->pcm_config, cfg_prefix, "period_size", speriod_size);
+ buffer_size = conf_get_long(data->pcm_config, cfg_prefix, "buffer_size", sbuffer_size);
- automatic = strcmp(test->format, snd_pcm_format_name(format)) == 0 &&
- test->rate == rate &&
- test->channels == channels &&
- test->period_size == period_size &&
- test->buffer_size == buffer_size;
+ automatic = strcmp(sformat, snd_pcm_format_name(format)) == 0 &&
+ srate == rate &&
+ schannels == channels &&
+ speriod_size == period_size &&
+ sbuffer_size == buffer_size;
samples = malloc((rate * channels * snd_pcm_format_physical_width(format)) / 8);
if (!samples)
@@ -302,7 +293,7 @@ static void test_pcm_time1(struct pcm_data *data,
if (automatic && format == SND_PCM_FORMAT_S16_LE) {
format = SND_PCM_FORMAT_S32_LE;
ksft_print_msg("%s.%d.%d.%d.%s.%s format S16_LE -> S32_LE\n",
- test->cfg_prefix,
+ cfg_prefix,
data->card, data->device, data->subdevice,
snd_pcm_stream_name(data->stream),
snd_pcm_access_name(access));
@@ -311,17 +302,11 @@ static void test_pcm_time1(struct pcm_data *data,
snd_pcm_format_name(format), snd_strerror(err));
goto __close;
}
- rchannels = channels;
- err = snd_pcm_hw_params_set_channels_near(handle, hw_params, &rchannels);
+ err = snd_pcm_hw_params_set_channels(handle, hw_params, channels);
if (err < 0) {
snprintf(msg, sizeof(msg), "snd_pcm_hw_params_set_channels %ld: %s", channels, snd_strerror(err));
goto __close;
}
- if (rchannels != channels) {
- snprintf(msg, sizeof(msg), "channels unsupported %ld != %ld", channels, rchannels);
- skip = true;
- goto __close;
- }
rrate = rate;
err = snd_pcm_hw_params_set_rate_near(handle, hw_params, &rrate, 0);
if (err < 0) {
@@ -329,8 +314,7 @@ static void test_pcm_time1(struct pcm_data *data,
goto __close;
}
if (rrate != rate) {
- snprintf(msg, sizeof(msg), "rate unsupported %ld != %ld", rate, rrate);
- skip = true;
+ snprintf(msg, sizeof(msg), "rate mismatch %ld != %ld", rate, rrate);
goto __close;
}
rperiod_size = period_size;
@@ -378,7 +362,7 @@ static void test_pcm_time1(struct pcm_data *data,
}
ksft_print_msg("%s.%d.%d.%d.%s hw_params.%s.%s.%ld.%ld.%ld.%ld sw_params.%ld\n",
- test->cfg_prefix,
+ cfg_prefix,
data->card, data->device, data->subdevice,
snd_pcm_stream_name(data->stream),
snd_pcm_access_name(access),
@@ -426,40 +410,21 @@ static void test_pcm_time1(struct pcm_data *data,
msg[0] = '\0';
pass = true;
__close:
- if (!skip) {
- ksft_test_result(pass, "%s.%d.%d.%d.%s%s%s\n",
- test->cfg_prefix,
- data->card, data->device, data->subdevice,
- snd_pcm_stream_name(data->stream),
- msg[0] ? " " : "", msg);
- } else {
- ksft_test_result_skip("%s.%d.%d.%d.%s%s%s\n",
- test->cfg_prefix,
- data->card, data->device,
- data->subdevice,
- snd_pcm_stream_name(data->stream),
- msg[0] ? " " : "", msg);
- }
+ ksft_test_result(pass, "%s.%d.%d.%d.%s%s%s\n",
+ cfg_prefix,
+ data->card, data->device, data->subdevice,
+ snd_pcm_stream_name(data->stream),
+ msg[0] ? " " : "", msg);
free(samples);
if (handle)
snd_pcm_close(handle);
}
-static const struct time_test_def time_tests[] = {
- /* name format rate chan period buffer */
- { "8k.1.big", "S16_LE", 8000, 2, 8000, 32000 },
- { "8k.2.big", "S16_LE", 8000, 2, 8000, 32000 },
- { "44k1.2.big", "S16_LE", 44100, 2, 22050, 192000 },
- { "48k.2.small", "S16_LE", 48000, 2, 512, 4096 },
- { "48k.2.big", "S16_LE", 48000, 2, 24000, 192000 },
- { "48k.6.big", "S16_LE", 48000, 6, 48000, 576000 },
- { "96k.2.big", "S16_LE", 96000, 2, 48000, 192000 },
-};
+#define TESTS_PER_PCM 2
int main(void)
{
struct pcm_data *pcm;
- int i;
ksft_print_header();
@@ -467,7 +432,7 @@ int main(void)
find_pcms();
- ksft_set_plan(num_missing + num_pcms * ARRAY_SIZE(time_tests));
+ ksft_set_plan(num_missing + num_pcms * TESTS_PER_PCM);
for (pcm = pcm_missing; pcm != NULL; pcm = pcm->next) {
ksft_test_result(false, "test.missing.%d.%d.%d.%s\n",
@@ -476,9 +441,8 @@ int main(void)
}
for (pcm = pcm_list; pcm != NULL; pcm = pcm->next) {
- for (i = 0; i < ARRAY_SIZE(time_tests); i++) {
- test_pcm_time1(pcm, &time_tests[i]);
- }
+ test_pcm_time1(pcm, "test.time1", "S16_LE", 48000, 2, 512, 4096);
+ test_pcm_time1(pcm, "test.time2", "S16_LE", 48000, 2, 24000, 192000);
}
conf_free();
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 2/7] kselftest/alsa: pcm - move more configuration to configuration files
2022-12-02 0:17 [PATCH v3 0/7] kselftest/alsa: pcm-test improvements Mark Brown
2022-12-02 0:17 ` [PATCH v3 1/7] kselftest/alsa: pcm - Drop recent coverage improvement changes Mark Brown
@ 2022-12-02 0:17 ` Mark Brown
2022-12-02 0:17 ` [PATCH v3 3/7] kselftest/alsa: pcm - Always run the default set of tests Mark Brown
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2022-12-02 0:17 UTC (permalink / raw)
To: Takashi Iwai, Jaroslav Kysela, Shuah Khan
Cc: alsa-devel, linux-kselftest, Mark Brown
From: Jaroslav Kysela <perex@perex.cz>
Obtain all test parameters from the configuration files. The defaults
are defined in the pcm-test.conf file. The test count and parameters
may be variable per specific hardware.
Also, handle alt_formats field now (with the fixes in the format loop).
It replaces the original "automatic" logic which is not so universal.
The code may be further extended to skip various tests based
on the configuration hints, if the exact PCM hardware parameters
are not available for the given hardware.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
tools/testing/selftests/alsa/Makefile | 2 +-
tools/testing/selftests/alsa/alsa-local.h | 3 +
tools/testing/selftests/alsa/conf.c | 26 ++++-
.../alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf | 8 ++
tools/testing/selftests/alsa/pcm-test.c | 102 ++++++++++++------
tools/testing/selftests/alsa/pcm-test.conf | 16 +++
6 files changed, 121 insertions(+), 36 deletions(-)
create mode 100644 tools/testing/selftests/alsa/pcm-test.conf
diff --git a/tools/testing/selftests/alsa/Makefile b/tools/testing/selftests/alsa/Makefile
index a8c0383878d3..77fba3e498cc 100644
--- a/tools/testing/selftests/alsa/Makefile
+++ b/tools/testing/selftests/alsa/Makefile
@@ -14,7 +14,7 @@ TEST_GEN_PROGS := mixer-test pcm-test
TEST_GEN_PROGS_EXTENDED := libatest.so
-TEST_FILES := conf.d
+TEST_FILES := conf.d pcm-test.conf
include ../lib.mk
diff --git a/tools/testing/selftests/alsa/alsa-local.h b/tools/testing/selftests/alsa/alsa-local.h
index 65f197ea9773..de030dc23bd1 100644
--- a/tools/testing/selftests/alsa/alsa-local.h
+++ b/tools/testing/selftests/alsa/alsa-local.h
@@ -12,6 +12,7 @@
snd_config_t *get_alsalib_config(void);
+snd_config_t *conf_load_from_file(const char *filename);
void conf_load(void);
void conf_free(void);
snd_config_t *conf_by_card(int card);
@@ -20,5 +21,7 @@ int conf_get_count(snd_config_t *root, const char *key1, const char *key2);
const char *conf_get_string(snd_config_t *root, const char *key1, const char *key2, const char *def);
long conf_get_long(snd_config_t *root, const char *key1, const char *key2, long def);
int conf_get_bool(snd_config_t *root, const char *key1, const char *key2, int def);
+void conf_get_string_array(snd_config_t *root, const char *key1, const char *key2,
+ const char **array, int array_size, const char *def);
#endif /* __ALSA_LOCAL_H */
diff --git a/tools/testing/selftests/alsa/conf.c b/tools/testing/selftests/alsa/conf.c
index c7ffc8f04195..d7aafe5a1993 100644
--- a/tools/testing/selftests/alsa/conf.c
+++ b/tools/testing/selftests/alsa/conf.c
@@ -125,7 +125,7 @@ static int dump_config_tree(snd_config_t *top)
snd_output_close(out);
}
-static snd_config_t *load(const char *filename)
+snd_config_t *conf_load_from_file(const char *filename)
{
snd_config_t *dst;
snd_input_t *input;
@@ -235,7 +235,7 @@ static bool test_filename1(int card, const char *filename, const char *sysfs_car
snd_config_t *config, *sysfs_config, *card_config, *sysfs_card_config, *node;
snd_config_iterator_t i, next;
- config = load(filename);
+ config = conf_load_from_file(filename);
if (snd_config_search(config, "sysfs", &sysfs_config) ||
snd_config_get_type(sysfs_config) != SND_CONFIG_TYPE_COMPOUND)
ksft_exit_fail_msg("Missing global sysfs block in filename %s\n", filename);
@@ -446,3 +446,25 @@ int conf_get_bool(snd_config_t *root, const char *key1, const char *key2, int de
ksft_exit_fail_msg("key '%s'.'%s' is not an bool\n", key1, key2);
return !!ret;
}
+
+void conf_get_string_array(snd_config_t *root, const char *key1, const char *key2,
+ const char **array, int array_size, const char *def)
+{
+ snd_config_t *cfg;
+ char buf[16];
+ int ret, index;
+
+ ret = conf_get_by_keys(root, key1, key2, &cfg);
+ if (ret == -ENOENT)
+ cfg = NULL;
+ else if (ret < 0)
+ ksft_exit_fail_msg("key '%s'.'%s' search error: %s\n", key1, key2, snd_strerror(ret));
+ for (index = 0; index < array_size; index++) {
+ if (cfg == NULL) {
+ array[index] = def;
+ } else {
+ sprintf(buf, "%i", index);
+ array[index] = conf_get_string(cfg, buf, NULL, def);
+ }
+ }
+}
diff --git a/tools/testing/selftests/alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf b/tools/testing/selftests/alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf
index 0a83f35d43eb..5b40a916295d 100644
--- a/tools/testing/selftests/alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf
+++ b/tools/testing/selftests/alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf
@@ -55,6 +55,14 @@ card.hda {
period_size 24000
buffer_size 192000
}
+ test.time3 {
+ access RW_INTERLEAVED
+ format S16_LE
+ rate 44100
+ channels 2
+ period_size 24000
+ buffer_size 192000
+ }
}
CAPTURE {
# use default tests, check for the presence
diff --git a/tools/testing/selftests/alsa/pcm-test.c b/tools/testing/selftests/alsa/pcm-test.c
index 6e7dfc395b98..e973b03ae1fd 100644
--- a/tools/testing/selftests/alsa/pcm-test.c
+++ b/tools/testing/selftests/alsa/pcm-test.c
@@ -31,7 +31,6 @@ struct pcm_data {
struct pcm_data *next;
};
-int num_pcms = 0;
struct pcm_data *pcm_list = NULL;
int num_missing = 0;
@@ -200,7 +199,6 @@ static void find_pcms(void)
pcm_data->pcm_config = conf_get_subtree(card_config, key, NULL);
pcm_data->next = pcm_list;
pcm_list = pcm_data;
- num_pcms++;
}
}
}
@@ -219,17 +217,15 @@ static void find_pcms(void)
snd_config_delete(config);
}
-static void test_pcm_time1(struct pcm_data *data,
- const char *cfg_prefix, const char *sformat,
- long srate, long schannels,
- long speriod_size, long sbuffer_size)
+static void test_pcm_time(struct pcm_data *data, const char *test_name, snd_config_t *pcm_cfg)
{
char name[64], key[128], msg[256];
const char *cs;
int i, err;
snd_pcm_t *handle = NULL;
snd_pcm_access_t access = SND_PCM_ACCESS_RW_INTERLEAVED;
- snd_pcm_format_t format;
+ snd_pcm_format_t format, old_format;
+ const char *alt_formats[8];
unsigned char *samples = NULL;
snd_pcm_sframes_t frames;
long long ms;
@@ -237,27 +233,23 @@ static void test_pcm_time1(struct pcm_data *data,
unsigned int rrate;
snd_pcm_uframes_t rperiod_size, rbuffer_size, start_threshold;
timestamp_t tstamp;
- bool pass = false, automatic = true;
+ bool pass = false;
snd_pcm_hw_params_t *hw_params;
snd_pcm_sw_params_t *sw_params;
snd_pcm_hw_params_alloca(&hw_params);
snd_pcm_sw_params_alloca(&sw_params);
- cs = conf_get_string(data->pcm_config, cfg_prefix, "format", sformat);
+ cs = conf_get_string(pcm_cfg, "format", NULL, "S16_LE");
format = snd_pcm_format_value(cs);
if (format == SND_PCM_FORMAT_UNKNOWN)
ksft_exit_fail_msg("Wrong format '%s'\n", cs);
- rate = conf_get_long(data->pcm_config, cfg_prefix, "rate", srate);
- channels = conf_get_long(data->pcm_config, cfg_prefix, "channels", schannels);
- period_size = conf_get_long(data->pcm_config, cfg_prefix, "period_size", speriod_size);
- buffer_size = conf_get_long(data->pcm_config, cfg_prefix, "buffer_size", sbuffer_size);
-
- automatic = strcmp(sformat, snd_pcm_format_name(format)) == 0 &&
- srate == rate &&
- schannels == channels &&
- speriod_size == period_size &&
- sbuffer_size == buffer_size;
+ conf_get_string_array(pcm_cfg, "alt_formats", NULL,
+ alt_formats, ARRAY_SIZE(alt_formats), NULL);
+ rate = conf_get_long(pcm_cfg, "rate", NULL, 48000);
+ channels = conf_get_long(pcm_cfg, "channels", NULL, 2);
+ period_size = conf_get_long(pcm_cfg, "period_size", NULL, 4096);
+ buffer_size = conf_get_long(pcm_cfg, "buffer_size", NULL, 16384);
samples = malloc((rate * channels * snd_pcm_format_physical_width(format)) / 8);
if (!samples)
@@ -287,16 +279,29 @@ static void test_pcm_time1(struct pcm_data *data,
snd_pcm_access_name(access), snd_strerror(err));
goto __close;
}
+ i = -1;
__format:
err = snd_pcm_hw_params_set_format(handle, hw_params, format);
if (err < 0) {
- if (automatic && format == SND_PCM_FORMAT_S16_LE) {
- format = SND_PCM_FORMAT_S32_LE;
- ksft_print_msg("%s.%d.%d.%d.%s.%s format S16_LE -> S32_LE\n",
- cfg_prefix,
- data->card, data->device, data->subdevice,
- snd_pcm_stream_name(data->stream),
- snd_pcm_access_name(access));
+ i++;
+ if (i < ARRAY_SIZE(alt_formats) && alt_formats[i]) {
+ old_format = format;
+ format = snd_pcm_format_value(alt_formats[i]);
+ if (format != SND_PCM_FORMAT_UNKNOWN) {
+ ksft_print_msg("%s.%d.%d.%d.%s.%s format %s -> %s\n",
+ test_name,
+ data->card, data->device, data->subdevice,
+ snd_pcm_stream_name(data->stream),
+ snd_pcm_access_name(access),
+ snd_pcm_format_name(old_format),
+ snd_pcm_format_name(format));
+ samples = realloc(samples, (rate * channels *
+ snd_pcm_format_physical_width(format)) / 8);
+ if (!samples)
+ ksft_exit_fail_msg("Out of memory\n");
+ snd_pcm_format_set_silence(format, samples, rate * channels);
+ goto __format;
+ }
}
snprintf(msg, sizeof(msg), "snd_pcm_hw_params_set_format %s: %s",
snd_pcm_format_name(format), snd_strerror(err));
@@ -362,7 +367,7 @@ static void test_pcm_time1(struct pcm_data *data,
}
ksft_print_msg("%s.%d.%d.%d.%s hw_params.%s.%s.%ld.%ld.%ld.%ld sw_params.%ld\n",
- cfg_prefix,
+ test_name,
data->card, data->device, data->subdevice,
snd_pcm_stream_name(data->stream),
snd_pcm_access_name(access),
@@ -411,7 +416,7 @@ static void test_pcm_time1(struct pcm_data *data,
pass = true;
__close:
ksft_test_result(pass, "%s.%d.%d.%d.%s%s%s\n",
- cfg_prefix,
+ test_name,
data->card, data->device, data->subdevice,
snd_pcm_stream_name(data->stream),
msg[0] ? " " : "", msg);
@@ -420,19 +425,35 @@ static void test_pcm_time1(struct pcm_data *data,
snd_pcm_close(handle);
}
-#define TESTS_PER_PCM 2
-
int main(void)
{
struct pcm_data *pcm;
+ snd_config_t *global_config, *default_pcm_config, *cfg, *pcm_cfg;
+ snd_config_iterator_t i, next;
+ int num_pcm_tests = 0, num_tests;
+ const char *test_name, *test_type;
ksft_print_header();
+ global_config = conf_load_from_file("pcm-test.conf");
+ default_pcm_config = conf_get_subtree(global_config, "pcm", NULL);
+ if (default_pcm_config == NULL)
+ ksft_exit_fail_msg("default pcm test configuration (pcm compound) is missing\n");
+
conf_load();
find_pcms();
- ksft_set_plan(num_missing + num_pcms * TESTS_PER_PCM);
+ for (pcm = pcm_list; pcm != NULL; pcm = pcm->next) {
+ cfg = pcm->pcm_config;
+ if (cfg == NULL)
+ cfg = default_pcm_config;
+ num_tests = conf_get_count(cfg, "test", NULL);
+ if (num_tests > 0)
+ num_pcm_tests += num_tests;
+ }
+
+ ksft_set_plan(num_missing + num_pcm_tests);
for (pcm = pcm_missing; pcm != NULL; pcm = pcm->next) {
ksft_test_result(false, "test.missing.%d.%d.%d.%s\n",
@@ -441,10 +462,25 @@ int main(void)
}
for (pcm = pcm_list; pcm != NULL; pcm = pcm->next) {
- test_pcm_time1(pcm, "test.time1", "S16_LE", 48000, 2, 512, 4096);
- test_pcm_time1(pcm, "test.time2", "S16_LE", 48000, 2, 24000, 192000);
+ cfg = pcm->pcm_config;
+ if (cfg == NULL)
+ cfg = default_pcm_config;
+ cfg = conf_get_subtree(cfg, "test", NULL);
+ if (cfg == NULL)
+ continue;
+ snd_config_for_each(i, next, cfg) {
+ pcm_cfg = snd_config_iterator_entry(i);
+ if (snd_config_get_id(pcm_cfg, &test_name) < 0)
+ ksft_exit_fail_msg("snd_config_get_id\n");
+ test_type = conf_get_string(pcm_cfg, "type", NULL, "time");
+ if (strcmp(test_type, "time") == 0)
+ test_pcm_time(pcm, test_name, pcm_cfg);
+ else
+ ksft_exit_fail_msg("unknown test type '%s'\n", test_type);
+ }
}
+ snd_config_delete(global_config);
conf_free();
ksft_exit_pass();
diff --git a/tools/testing/selftests/alsa/pcm-test.conf b/tools/testing/selftests/alsa/pcm-test.conf
new file mode 100644
index 000000000000..473a19251b49
--- /dev/null
+++ b/tools/testing/selftests/alsa/pcm-test.conf
@@ -0,0 +1,16 @@
+pcm.test.time1 {
+ format S16_LE
+ alt_formats [ S32_LE ]
+ rate 48000
+ channels 2
+ period_size 512
+ buffer_size 4096
+}
+pcm.test.time2 {
+ format S16_LE
+ alt_formats [ S32_LE ]
+ rate 48000
+ channels 2
+ period_size 24000
+ buffer_size 192000
+}
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 3/7] kselftest/alsa: pcm - Always run the default set of tests
2022-12-02 0:17 [PATCH v3 0/7] kselftest/alsa: pcm-test improvements Mark Brown
2022-12-02 0:17 ` [PATCH v3 1/7] kselftest/alsa: pcm - Drop recent coverage improvement changes Mark Brown
2022-12-02 0:17 ` [PATCH v3 2/7] kselftest/alsa: pcm - move more configuration to configuration files Mark Brown
@ 2022-12-02 0:17 ` Mark Brown
2022-12-02 0:17 ` [PATCH v3 4/7] kselftest/alsa: pcm - skip tests when we fail to set params Mark Brown
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2022-12-02 0:17 UTC (permalink / raw)
To: Takashi Iwai, Jaroslav Kysela, Shuah Khan
Cc: alsa-devel, linux-kselftest, Mark Brown
Rather than allowing the system specific tests to replace the default set
of tests instead run them in addition to the standard set of tests. In
order to avoid name collisions in the reported tests we add an additional
test class element to the reported tests. Doing this means we always get a
consistent baseline of coverage no matter what card we run on but retain
the ability to specify specific coverage for a given system.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
tools/testing/selftests/alsa/pcm-test.c | 83 +++++++++++++++++--------
1 file changed, 58 insertions(+), 25 deletions(-)
diff --git a/tools/testing/selftests/alsa/pcm-test.c b/tools/testing/selftests/alsa/pcm-test.c
index e973b03ae1fd..afc616ddc820 100644
--- a/tools/testing/selftests/alsa/pcm-test.c
+++ b/tools/testing/selftests/alsa/pcm-test.c
@@ -36,6 +36,11 @@ struct pcm_data *pcm_list = NULL;
int num_missing = 0;
struct pcm_data *pcm_missing = NULL;
+enum test_class {
+ TEST_CLASS_DEFAULT,
+ TEST_CLASS_SYSTEM,
+};
+
void timestamp_now(timestamp_t *tstamp)
{
if (clock_gettime(CLOCK_MONOTONIC_RAW, tstamp))
@@ -217,7 +222,8 @@ static void find_pcms(void)
snd_config_delete(config);
}
-static void test_pcm_time(struct pcm_data *data, const char *test_name, snd_config_t *pcm_cfg)
+static void test_pcm_time(struct pcm_data *data, enum test_class class,
+ const char *test_name, snd_config_t *pcm_cfg)
{
char name[64], key[128], msg[256];
const char *cs;
@@ -236,6 +242,19 @@ static void test_pcm_time(struct pcm_data *data, const char *test_name, snd_conf
bool pass = false;
snd_pcm_hw_params_t *hw_params;
snd_pcm_sw_params_t *sw_params;
+ const char *test_class_name;
+
+ switch (class) {
+ case TEST_CLASS_DEFAULT:
+ test_class_name = "default";
+ break;
+ case TEST_CLASS_SYSTEM:
+ test_class_name = "system";
+ break;
+ default:
+ ksft_exit_fail_msg("Unknown test class %d\n", class);
+ break;
+ }
snd_pcm_hw_params_alloca(&hw_params);
snd_pcm_sw_params_alloca(&sw_params);
@@ -366,8 +385,8 @@ static void test_pcm_time(struct pcm_data *data, const char *test_name, snd_conf
goto __close;
}
- ksft_print_msg("%s.%d.%d.%d.%s hw_params.%s.%s.%ld.%ld.%ld.%ld sw_params.%ld\n",
- test_name,
+ ksft_print_msg("%s.%s.%d.%d.%d.%s hw_params.%s.%s.%ld.%ld.%ld.%ld sw_params.%ld\n",
+ test_class_name, test_name,
data->card, data->device, data->subdevice,
snd_pcm_stream_name(data->stream),
snd_pcm_access_name(access),
@@ -415,8 +434,9 @@ static void test_pcm_time(struct pcm_data *data, const char *test_name, snd_conf
msg[0] = '\0';
pass = true;
__close:
- ksft_test_result(pass, "%s.%d.%d.%d.%s%s%s\n",
- test_name,
+
+ ksft_test_result(pass, "%s.%s.%d.%d.%d.%s%s%s\n",
+ test_class_name, test_name,
data->card, data->device, data->subdevice,
snd_pcm_stream_name(data->stream),
msg[0] ? " " : "", msg);
@@ -425,13 +445,37 @@ static void test_pcm_time(struct pcm_data *data, const char *test_name, snd_conf
snd_pcm_close(handle);
}
+void run_time_tests(struct pcm_data *pcm, enum test_class class,
+ snd_config_t *cfg)
+{
+ const char *test_name, *test_type;
+ snd_config_t *pcm_cfg;
+ snd_config_iterator_t i, next;
+
+ if (!cfg)
+ return;
+
+ cfg = conf_get_subtree(cfg, "test", NULL);
+ if (cfg == NULL)
+ return;
+
+ snd_config_for_each(i, next, cfg) {
+ pcm_cfg = snd_config_iterator_entry(i);
+ if (snd_config_get_id(pcm_cfg, &test_name) < 0)
+ ksft_exit_fail_msg("snd_config_get_id\n");
+ test_type = conf_get_string(pcm_cfg, "type", NULL, "time");
+ if (strcmp(test_type, "time") == 0)
+ test_pcm_time(pcm, class, test_name, pcm_cfg);
+ else
+ ksft_exit_fail_msg("unknown test type '%s'\n", test_type);
+ }
+}
+
int main(void)
{
struct pcm_data *pcm;
snd_config_t *global_config, *default_pcm_config, *cfg, *pcm_cfg;
- snd_config_iterator_t i, next;
- int num_pcm_tests = 0, num_tests;
- const char *test_name, *test_type;
+ int num_pcm_tests = 0, num_tests, num_std_pcm_tests;
ksft_print_header();
@@ -444,10 +488,13 @@ int main(void)
find_pcms();
+ num_std_pcm_tests = conf_get_count(default_pcm_config, "test", NULL);
+
for (pcm = pcm_list; pcm != NULL; pcm = pcm->next) {
+ num_pcm_tests += num_std_pcm_tests;
cfg = pcm->pcm_config;
if (cfg == NULL)
- cfg = default_pcm_config;
+ continue;
num_tests = conf_get_count(cfg, "test", NULL);
if (num_tests > 0)
num_pcm_tests += num_tests;
@@ -462,22 +509,8 @@ int main(void)
}
for (pcm = pcm_list; pcm != NULL; pcm = pcm->next) {
- cfg = pcm->pcm_config;
- if (cfg == NULL)
- cfg = default_pcm_config;
- cfg = conf_get_subtree(cfg, "test", NULL);
- if (cfg == NULL)
- continue;
- snd_config_for_each(i, next, cfg) {
- pcm_cfg = snd_config_iterator_entry(i);
- if (snd_config_get_id(pcm_cfg, &test_name) < 0)
- ksft_exit_fail_msg("snd_config_get_id\n");
- test_type = conf_get_string(pcm_cfg, "type", NULL, "time");
- if (strcmp(test_type, "time") == 0)
- test_pcm_time(pcm, test_name, pcm_cfg);
- else
- ksft_exit_fail_msg("unknown test type '%s'\n", test_type);
- }
+ run_time_tests(pcm, TEST_CLASS_DEFAULT, default_pcm_config);
+ run_time_tests(pcm, TEST_CLASS_SYSTEM, pcm->pcm_config);
}
snd_config_delete(global_config);
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 4/7] kselftest/alsa: pcm - skip tests when we fail to set params
2022-12-02 0:17 [PATCH v3 0/7] kselftest/alsa: pcm-test improvements Mark Brown
` (2 preceding siblings ...)
2022-12-02 0:17 ` [PATCH v3 3/7] kselftest/alsa: pcm - Always run the default set of tests Mark Brown
@ 2022-12-02 0:17 ` Mark Brown
2022-12-02 0:17 ` [PATCH v3 5/7] kselftest/alsa: pcm - Support optional description for tests Mark Brown
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2022-12-02 0:17 UTC (permalink / raw)
To: Takashi Iwai, Jaroslav Kysela, Shuah Khan
Cc: alsa-devel, linux-kselftest, Mark Brown
Since we don't know what the capabilities of an unknown card is any of our
standard tests may fail due to not being supported by the system. Set a
flag once we've configured the stream, just before we start data, to say
that the system accepted our stream configuration.
Since there shouldn't be a use case for tests that are specified for the
individual system failing for those tests we also add a new test which
fails if we are unable to configure the settings specified in the system
specific configuration file.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
tools/testing/selftests/alsa/pcm-test.c | 39 +++++++++++++++++++++----
1 file changed, 33 insertions(+), 6 deletions(-)
diff --git a/tools/testing/selftests/alsa/pcm-test.c b/tools/testing/selftests/alsa/pcm-test.c
index afc616ddc820..5fbb3ff517aa 100644
--- a/tools/testing/selftests/alsa/pcm-test.c
+++ b/tools/testing/selftests/alsa/pcm-test.c
@@ -243,6 +243,7 @@ static void test_pcm_time(struct pcm_data *data, enum test_class class,
snd_pcm_hw_params_t *hw_params;
snd_pcm_sw_params_t *sw_params;
const char *test_class_name;
+ bool skip = true;
switch (class) {
case TEST_CLASS_DEFAULT:
@@ -395,6 +396,9 @@ static void test_pcm_time(struct pcm_data *data, enum test_class class,
(long)rperiod_size, (long)rbuffer_size,
(long)start_threshold);
+ /* Set all the params, actually run the test */
+ skip = false;
+
timestamp_now(&tstamp);
for (i = 0; i < 4; i++) {
if (data->stream == SND_PCM_STREAM_PLAYBACK) {
@@ -434,12 +438,34 @@ static void test_pcm_time(struct pcm_data *data, enum test_class class,
msg[0] = '\0';
pass = true;
__close:
+ switch (class) {
+ case TEST_CLASS_SYSTEM:
+ test_class_name = "system";
+ /*
+ * Anything specified as specific to this system
+ * should always be supported.
+ */
+ ksft_test_result(!skip, "%s.%s.%d.%d.%d.%s.params\n",
+ test_class_name, test_name,
+ data->card, data->device, data->subdevice,
+ snd_pcm_stream_name(data->stream));
+ break;
+ default:
+ break;
+ }
- ksft_test_result(pass, "%s.%s.%d.%d.%d.%s%s%s\n",
- test_class_name, test_name,
- data->card, data->device, data->subdevice,
- snd_pcm_stream_name(data->stream),
- msg[0] ? " " : "", msg);
+ if (!skip)
+ ksft_test_result(pass, "%s.%s.%d.%d.%d.%s%s%s\n",
+ test_class_name, test_name,
+ data->card, data->device, data->subdevice,
+ snd_pcm_stream_name(data->stream),
+ msg[0] ? " " : "", msg);
+ else
+ ksft_test_result_skip("%s.%s.%d.%d.%d.%s%s%s\n",
+ test_class_name, test_name,
+ data->card, data->device, data->subdevice,
+ snd_pcm_stream_name(data->stream),
+ msg[0] ? " " : "", msg);
free(samples);
if (handle)
snd_pcm_close(handle);
@@ -495,7 +521,8 @@ int main(void)
cfg = pcm->pcm_config;
if (cfg == NULL)
continue;
- num_tests = conf_get_count(cfg, "test", NULL);
+ /* Setting params is reported as a separate test */
+ num_tests = conf_get_count(cfg, "test", NULL) * 2;
if (num_tests > 0)
num_pcm_tests += num_tests;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 5/7] kselftest/alsa: pcm - Support optional description for tests
2022-12-02 0:17 [PATCH v3 0/7] kselftest/alsa: pcm-test improvements Mark Brown
` (3 preceding siblings ...)
2022-12-02 0:17 ` [PATCH v3 4/7] kselftest/alsa: pcm - skip tests when we fail to set params Mark Brown
@ 2022-12-02 0:17 ` Mark Brown
2022-12-02 0:17 ` [PATCH v3 6/7] kselftest/alsa: pcm - Provide descriptions for the default tests Mark Brown
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2022-12-02 0:17 UTC (permalink / raw)
To: Takashi Iwai, Jaroslav Kysela, Shuah Khan
Cc: alsa-devel, linux-kselftest, Mark Brown
In order to help with the comprehensibility of tests it is useful for us to
document what the test is attempting to cover. We could just do this through
comments in the configuration files but in order to aid people looking at
the output of the program in logs let's provide support for an optional
'description' directive which we log prior to running each of the tests.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
tools/testing/selftests/alsa/pcm-test.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/tools/testing/selftests/alsa/pcm-test.c b/tools/testing/selftests/alsa/pcm-test.c
index 5fbb3ff517aa..57d3f6dcb46b 100644
--- a/tools/testing/selftests/alsa/pcm-test.c
+++ b/tools/testing/selftests/alsa/pcm-test.c
@@ -244,6 +244,11 @@ static void test_pcm_time(struct pcm_data *data, enum test_class class,
snd_pcm_sw_params_t *sw_params;
const char *test_class_name;
bool skip = true;
+ const char *desc;
+
+ desc = conf_get_string(pcm_cfg, "description", NULL, NULL);
+ if (desc)
+ ksft_print_msg("%s\n", desc);
switch (class) {
case TEST_CLASS_DEFAULT:
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 6/7] kselftest/alsa: pcm - Provide descriptions for the default tests
2022-12-02 0:17 [PATCH v3 0/7] kselftest/alsa: pcm-test improvements Mark Brown
` (4 preceding siblings ...)
2022-12-02 0:17 ` [PATCH v3 5/7] kselftest/alsa: pcm - Support optional description for tests Mark Brown
@ 2022-12-02 0:17 ` Mark Brown
2022-12-02 0:17 ` [PATCH v3 7/7] kselftest/alsa: pcm - Add more coverage by default Mark Brown
2022-12-02 8:58 ` [PATCH v3 0/7] kselftest/alsa: pcm-test improvements Jaroslav Kysela
7 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2022-12-02 0:17 UTC (permalink / raw)
To: Takashi Iwai, Jaroslav Kysela, Shuah Khan
Cc: alsa-devel, linux-kselftest, Mark Brown
Help people understand what the standard tests are trying to cover by
providing descriptions which both serve as comments in the file and log
messages in the program's output.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
tools/testing/selftests/alsa/pcm-test.conf | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/alsa/pcm-test.conf b/tools/testing/selftests/alsa/pcm-test.conf
index 473a19251b49..1662a8c7073e 100644
--- a/tools/testing/selftests/alsa/pcm-test.conf
+++ b/tools/testing/selftests/alsa/pcm-test.conf
@@ -1,4 +1,5 @@
pcm.test.time1 {
+ description "48kHz stereo small periods"
format S16_LE
alt_formats [ S32_LE ]
rate 48000
@@ -7,6 +8,7 @@ pcm.test.time1 {
buffer_size 4096
}
pcm.test.time2 {
+ description "48kHz stereo large periods"
format S16_LE
alt_formats [ S32_LE ]
rate 48000
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v3 7/7] kselftest/alsa: pcm - Add more coverage by default
2022-12-02 0:17 [PATCH v3 0/7] kselftest/alsa: pcm-test improvements Mark Brown
` (5 preceding siblings ...)
2022-12-02 0:17 ` [PATCH v3 6/7] kselftest/alsa: pcm - Provide descriptions for the default tests Mark Brown
@ 2022-12-02 0:17 ` Mark Brown
2022-12-02 8:58 ` [PATCH v3 0/7] kselftest/alsa: pcm-test improvements Jaroslav Kysela
7 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2022-12-02 0:17 UTC (permalink / raw)
To: Takashi Iwai, Jaroslav Kysela, Shuah Khan
Cc: alsa-devel, linux-kselftest, Mark Brown
Add more coverage to our standard test cases:
- 8kHz mono and stereo to verify that the most common mono format is
clocked correctly.
- 44.1kHz stereo to verify that this different clock base is generated
accurately.
- 48kHz 6 channel to verify that 6 channel is clocked correctly.
- 96kHz stereo since that is a common audiophile rate.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
tools/testing/selftests/alsa/pcm-test.conf | 47 +++++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/alsa/pcm-test.conf b/tools/testing/selftests/alsa/pcm-test.conf
index 1662a8c7073e..71bd3f78a6f2 100644
--- a/tools/testing/selftests/alsa/pcm-test.conf
+++ b/tools/testing/selftests/alsa/pcm-test.conf
@@ -1,4 +1,31 @@
pcm.test.time1 {
+ description "8kHz mono large periods"
+ format S16_LE
+ alt_formats [ S32_LE ]
+ rate 8000
+ channels 1
+ period_size 8000
+ buffer_size 32000
+}
+pcm.test.time2 {
+ description "8kHz stereo large periods"
+ format S16_LE
+ alt_formats [ S32_LE ]
+ rate 8000
+ channels 2
+ period_size 8000
+ buffer_size 32000
+}
+pcm.test.time3 {
+ description "44.1kHz stereo large periods"
+ format S16_LE
+ alt_formats [ S32_LE ]
+ rate 44100
+ channels 2
+ period_size 22500
+ buffer_size 192000
+}
+pcm.test.time4 {
description "48kHz stereo small periods"
format S16_LE
alt_formats [ S32_LE ]
@@ -7,7 +34,7 @@ pcm.test.time1 {
period_size 512
buffer_size 4096
}
-pcm.test.time2 {
+pcm.test.time5 {
description "48kHz stereo large periods"
format S16_LE
alt_formats [ S32_LE ]
@@ -16,3 +43,21 @@ pcm.test.time2 {
period_size 24000
buffer_size 192000
}
+pcm.test.time6 {
+ description "48kHz 6 channel large periods"
+ format S16_LE
+ alt_formats [ S32_LE ]
+ rate 48000
+ channels 2
+ period_size 48000
+ buffer_size 576000
+}
+pcm.test.time7 {
+ description "96kHz stereo large periods"
+ format S16_LE
+ alt_formats [ S32_LE ]
+ rate 96000
+ channels 2
+ period_size 48000
+ buffer_size 192000
+}
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v3 0/7] kselftest/alsa: pcm-test improvements
2022-12-02 0:17 [PATCH v3 0/7] kselftest/alsa: pcm-test improvements Mark Brown
` (6 preceding siblings ...)
2022-12-02 0:17 ` [PATCH v3 7/7] kselftest/alsa: pcm - Add more coverage by default Mark Brown
@ 2022-12-02 8:58 ` Jaroslav Kysela
7 siblings, 0 replies; 9+ messages in thread
From: Jaroslav Kysela @ 2022-12-02 8:58 UTC (permalink / raw)
To: Mark Brown, Takashi Iwai, Shuah Khan; +Cc: alsa-devel, linux-kselftest
On 02. 12. 22 1:17, Mark Brown wrote:
> This series provides a bunch of quick updates which should make the
> coverage from pcm-test a bit more useful, it adds some support for
> skipping tests when the hardware/driver is unable to support the
> requested configuration, support for providing user visible descriptions
> and then expands the set of cases we cover to include more sample rates
> and channel counts. This should exercise switching between 8kHz and
> 44.1kHz based rates and ensure that clocking doesn't get confused by
> non-stereo channel counts, both of which are I expect common real world
> errors, at least for embedded cards.
>
> v3:
> - "Rebase" onto Takashi's current tree (with a revert).
> - Include Jaroslav's changes to specify all tests in the configuration
> file parsing.
> - Add a new "description" field to the configuration instead of trying
> to name the tests.
> - Always run both default and per-system tests, logging our success at
> setting the per-system configurations as a separate test since they
> shouldn't fail.
> v2:
> - Rebase onto Takashi's current tree.
> - Tweak the buffer sizes for the newly added cases, don't be quite
> so ambitious in how big a buffer we request for 96kHz and don't
> go quite so small for 8kHz since some devices start hitting lower
> limits on period size and struggle to deliver accurate timing.
>
> Jaroslav Kysela (1):
> kselftest/alsa: pcm - move more configuration to configuration files
>
> Mark Brown (6):
> kselftest/alsa: pcm - Drop recent coverage improvement changes
> kselftest/alsa: pcm - Always run the default set of tests
> kselftest/alsa: pcm - skip tests when we fail to set params
> kselftest/alsa: pcm - Support optional description for tests
> kselftest/alsa: pcm - Provide descriptions for the default tests
> kselftest/alsa: pcm - Add more coverage by default
>
> tools/testing/selftests/alsa/Makefile | 2 +-
> tools/testing/selftests/alsa/alsa-local.h | 3 +
> tools/testing/selftests/alsa/conf.c | 26 ++-
> .../alsa/conf.d/Lenovo_ThinkPad_P1_Gen2.conf | 43 ++--
> tools/testing/selftests/alsa/pcm-test.c | 205 ++++++++++++------
> tools/testing/selftests/alsa/pcm-test.conf | 63 ++++++
> 6 files changed, 250 insertions(+), 92 deletions(-)
> create mode 100644 tools/testing/selftests/alsa/pcm-test.conf
>
>
> base-commit: 7d721baea138696d5a6746fb5bce0a510a91bd65
All looks good. I would probably do some things differently, but the goal is
same. I am fine with all changes.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
--
Jaroslav Kysela <perex@perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
^ permalink raw reply [flat|nested] 9+ messages in thread