* [PATCH v9 9/9] selftests/pcie_bwctrl: Create selftests
[not found] <20241018144755.7875-1-ilpo.jarvinen@linux.intel.com>
@ 2024-10-18 14:47 ` Ilpo Järvinen
0 siblings, 0 replies; only message in thread
From: Ilpo Järvinen @ 2024-10-18 14:47 UTC (permalink / raw)
To: linux-pci, Bjorn Helgaas, Lorenzo Pieralisi, Rob Herring,
Krzysztof Wilczyński, Maciej W . Rozycki, Jonathan Cameron,
Lukas Wunner, Alexandru Gagniuc, Krishna chaitanya chundru,
Srinivas Pandruvada, Rafael J . Wysocki, linux-pm,
Smita Koralahalli, Shuah Khan, Ilpo Järvinen, linux-kernel,
linux-kselftest
Cc: Daniel Lezcano, Amit Kucheria, Zhang Rui, Christophe JAILLET,
Jonathan Cameron
Create selftests for PCIe BW control through the PCIe cooling device
sysfs interface.
First, the BW control selftest finds the PCIe Port to test with. By
default, the PCIe Port with the highest Link Speed is selected but
another PCIe Port can be provided with -d parameter.
The actual test steps the cur_state of the cooling device one-by-one
from max_state to what the cur_state was initially. The speed change
is confirmed by observing the current_link_speed for the corresponding
PCIe Port.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
MAINTAINERS | 1 +
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/pcie_bwctrl/Makefile | 2 +
.../pcie_bwctrl/set_pcie_cooling_state.sh | 122 ++++++++++++++++++
.../selftests/pcie_bwctrl/set_pcie_speed.sh | 67 ++++++++++
5 files changed, 193 insertions(+)
create mode 100644 tools/testing/selftests/pcie_bwctrl/Makefile
create mode 100755 tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh
create mode 100755 tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh
diff --git a/MAINTAINERS b/MAINTAINERS
index 393ed7ce5ea1..d7ffef4382df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17940,6 +17940,7 @@ S: Supported
F: drivers/pci/pcie/bwctrl.c
F: drivers/thermal/pcie_cooling.c
F: include/linux/pci-bwctrl.h
+F: tools/testing/selftests/pcie_bwctrl/
PCIE DRIVER FOR AMAZON ANNAPURNA LABS
M: Jonathan Chocron <jonnyc@amazon.com>
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index b38199965f99..7181756f47ff 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -72,6 +72,7 @@ TARGETS += net/packetdrill
TARGETS += net/rds
TARGETS += net/tcp_ao
TARGETS += nsfs
+TARGETS += pcie_bwctrl
TARGETS += perf_events
TARGETS += pidfd
TARGETS += pid_namespace
diff --git a/tools/testing/selftests/pcie_bwctrl/Makefile b/tools/testing/selftests/pcie_bwctrl/Makefile
new file mode 100644
index 000000000000..3e84e26341d1
--- /dev/null
+++ b/tools/testing/selftests/pcie_bwctrl/Makefile
@@ -0,0 +1,2 @@
+TEST_PROGS = set_pcie_cooling_state.sh
+include ../lib.mk
diff --git a/tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh b/tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh
new file mode 100755
index 000000000000..9df606552af3
--- /dev/null
+++ b/tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh
@@ -0,0 +1,122 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+SYSFS=
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+retval=0
+skipmsg="skip all tests:"
+
+PCIEPORTTYPE="PCIe_Port_Link_Speed"
+
+prerequisite()
+{
+ local ports
+
+ if [ $UID != 0 ]; then
+ echo $skipmsg must be run as root >&2
+ exit $ksft_skip
+ fi
+
+ SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'`
+
+ if [ ! -d "$SYSFS" ]; then
+ echo $skipmsg sysfs is not mounted >&2
+ exit $ksft_skip
+ fi
+
+ if ! ls $SYSFS/class/thermal/cooling_device* > /dev/null 2>&1; then
+ echo $skipmsg thermal cooling devices missing >&2
+ exit $ksft_skip
+ fi
+
+ ports=`grep -e "^$PCIEPORTTYPE" $SYSFS/class/thermal/cooling_device*/type | wc -l`
+ if [ $ports -eq 0 ]; then
+ echo $skipmsg pcie cooling devices missing >&2
+ exit $ksft_skip
+ fi
+}
+
+testport=
+find_pcie_port()
+{
+ local patt="$1"
+ local pcieports
+ local max
+ local cur
+ local delta
+ local bestdelta=-1
+
+ pcieports=`grep -l -F -e "$patt" /sys/class/thermal/cooling_device*/type`
+ if [ -z "$pcieports" ]; then
+ return
+ fi
+ pcieports=${pcieports//\/type/}
+ # Find the port with the highest PCIe Link Speed
+ for port in $pcieports; do
+ max=`cat $port/max_state`
+ cur=`cat $port/cur_state`
+ delta=$((max-cur))
+ if [ $delta -gt $bestdelta ]; then
+ testport="$port"
+ bestdelta=$delta
+ fi
+ done
+}
+
+sysfspcidev=
+find_sysfs_pci_dev()
+{
+ local typefile="$1/type"
+ local pcidir
+
+ pcidir="$SYSFS/bus/pci/devices/`sed -e "s|^${PCIEPORTTYPE}_||g" $typefile`"
+
+ if [ -r "$pcidir/current_link_speed" ]; then
+ sysfspcidev="$pcidir/current_link_speed"
+ fi
+}
+
+usage()
+{
+ echo "Usage $0 [ -d dev ]"
+ echo -e "\t-d: PCIe port BDF string (e.g., 0000:00:04.0)"
+}
+
+pattern="$PCIEPORTTYPE"
+parse_arguments()
+{
+ while getopts d:h opt; do
+ case $opt in
+ h)
+ usage "$0"
+ exit 0
+ ;;
+ d)
+ pattern="$PCIEPORTTYPE_$OPTARG"
+ ;;
+ *)
+ usage "$0"
+ exit 0
+ ;;
+ esac
+ done
+}
+
+parse_arguments "$@"
+prerequisite
+find_pcie_port "$pattern"
+if [ -z "$testport" ]; then
+ echo $skipmsg "pcie cooling device not found from sysfs" >&2
+ exit $ksft_skip
+fi
+find_sysfs_pci_dev "$testport"
+if [ -z "$sysfspcidev" ]; then
+ echo $skipmsg "PCIe port device not found from sysfs" >&2
+ exit $ksft_skip
+fi
+
+./set_pcie_speed.sh "$testport" "$sysfspcidev"
+retval=$?
+
+exit $retval
diff --git a/tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh b/tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh
new file mode 100755
index 000000000000..584596949312
--- /dev/null
+++ b/tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+set -e
+
+TESTNAME=set_pcie_speed
+
+declare -a PCIELINKSPEED=(
+ "2.5 GT/s PCIe"
+ "5.0 GT/s PCIe"
+ "8.0 GT/s PCIe"
+ "16.0 GT/s PCIe"
+ "32.0 GT/s PCIe"
+ "64.0 GT/s PCIe"
+)
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+retval=0
+
+coolingdev="$1"
+statefile="$coolingdev/cur_state"
+maxfile="$coolingdev/max_state"
+linkspeedfile="$2"
+
+oldstate=`cat $statefile`
+maxstate=`cat $maxfile`
+
+set_state()
+{
+ local state=$1
+ local linkspeed
+ local expected_linkspeed
+
+ echo $state > $statefile
+
+ sleep 1
+
+ linkspeed="`cat $linkspeedfile`"
+ expected_linkspeed=$((maxstate-state))
+ expected_str="${PCIELINKSPEED[$expected_linkspeed]}"
+ if [ ! "${expected_str}" = "${linkspeed}" ]; then
+ echo "$TESTNAME failed: expected: ${expected_str}; got ${linkspeed}"
+ retval=1
+ fi
+}
+
+cleanup_skip ()
+{
+ set_state $oldstate
+ exit $ksft_skip
+}
+
+trap cleanup_skip EXIT
+
+echo "$TESTNAME: testing states $maxstate .. $oldstate with $coolingdev"
+for i in $(seq $maxstate -1 $oldstate); do
+ set_state "$i"
+done
+
+trap EXIT
+if [ $retval -eq 0 ]; then
+ echo "$TESTNAME [PASS]"
+else
+ echo "$TESTNAME [FAIL]"
+fi
+exit $retval
--
2.39.5
^ permalink raw reply related [flat|nested] only message in thread