[PATCH bpf-next 10/10] selftests/bpf: test_tunnel: Remove test_tunnel.sh

["Bastien Curutchet (eBPF Foundation)" <bastien.curutchet@bootlin.com>]

All tests from test_tunnel.sh have been migrated into test test_progs.
The last test remaining in the script is the test_ipip() that is already
covered in the test_prog framework by the NONE case of test_ipip_tunnel().

Remove the test_tunnel.sh script and its Makefile entry

Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
---
 tools/testing/selftests/bpf/Makefile       |   1 -
 tools/testing/selftests/bpf/test_tunnel.sh | 179 -----------------------------
 2 files changed, 180 deletions(-)

diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index abfb450c26bb360ad23ff1201fb113557d3eced1..e6a02d5b87d123cef7e6b41bfbc96d34083f38e1 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -100,7 +100,6 @@ TEST_FILES = xsk_prereqs.sh $(wildcard progs/btf_dump_test_case_*.c)
 
 # Order correspond to 'make run_tests' order
 TEST_PROGS := test_kmod.sh \
-	test_tunnel.sh \
 	test_lwt_seg6local.sh \
 	test_lirc_mode2.sh \
 	test_xdp_vlan_mode_generic.sh \
diff --git a/tools/testing/selftests/bpf/test_tunnel.sh b/tools/testing/selftests/bpf/test_tunnel.sh
deleted file mode 100755
index 165023d1b5f70fd48ff05f0a53a332ef50e175da..0000000000000000000000000000000000000000
--- a/tools/testing/selftests/bpf/test_tunnel.sh
+++ /dev/null
@@ -1,179 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-
-# End-to-end eBPF tunnel test suite
-#   The script tests BPF network tunnel implementation.
-#
-# Topology:
-# ---------
-#     root namespace   |     at_ns0 namespace
-#                      |
-#      -----------     |     -----------
-#      | tnl dev |     |     | tnl dev |  (overlay network)
-#      -----------     |     -----------
-#      metadata-mode   |     native-mode
-#       with bpf       |
-#                      |
-#      ----------      |     ----------
-#      |  veth1  | --------- |  veth0  |  (underlay network)
-#      ----------    peer    ----------
-#
-#
-# Device Configuration
-# --------------------
-# Root namespace with metadata-mode tunnel + BPF
-# Device names and addresses:
-# 	veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay)
-# 	tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200, IPv6: 1::22 (overlay)
-#
-# Namespace at_ns0 with native tunnel
-# Device names and addresses:
-# 	veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay)
-# 	tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100, IPv6: 1::11 (overlay)
-#
-#
-# End-to-end ping packet flow
-# ---------------------------
-# Most of the tests start by namespace creation, device configuration,
-# then ping the underlay and overlay network.  When doing 'ping 10.1.1.100'
-# from root namespace, the following operations happen:
-# 1) Route lookup shows 10.1.1.100/24 belongs to tnl dev, fwd to tnl dev.
-# 2) Tnl device's egress BPF program is triggered and set the tunnel metadata,
-#    with remote_ip=172.16.1.100 and others.
-# 3) Outer tunnel header is prepended and route the packet to veth1's egress
-# 4) veth0's ingress queue receive the tunneled packet at namespace at_ns0
-# 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet
-# 6) Forward the packet to the overlay tnl dev
-
-BPF_FILE="test_tunnel_kern.bpf.o"
-BPF_PIN_TUNNEL_DIR="/sys/fs/bpf/tc/tunnel"
-PING_ARG="-c 3 -w 10 -q"
-ret=0
-GREEN='\033[0;92m'
-RED='\033[0;31m'
-NC='\033[0m' # No Color
-
-config_device()
-{
-	ip netns add at_ns0
-	ip link add veth0 type veth peer name veth1
-	ip link set veth0 netns at_ns0
-	ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
-	ip netns exec at_ns0 ip link set dev veth0 up
-	ip link set dev veth1 up mtu 1500
-	ip addr add dev veth1 172.16.1.200/24
-}
-
-add_ipip_tunnel()
-{
-	# at_ns0 namespace
-	ip netns exec at_ns0 \
-		ip link add dev $DEV_NS type $TYPE \
-		local 172.16.1.100 remote 172.16.1.200
-	ip netns exec at_ns0 ip link set dev $DEV_NS up
-	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
-
-	# root namespace
-	ip link add dev $DEV type $TYPE external
-	ip link set dev $DEV up
-	ip addr add dev $DEV 10.1.1.200/24
-}
-
-test_ipip()
-{
-	TYPE=ipip
-	DEV_NS=ipip00
-	DEV=ipip11
-	ret=0
-
-	check $TYPE
-	config_device
-	add_ipip_tunnel
-	ip link set dev veth1 mtu 1500
-	attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel
-	ping $PING_ARG 10.1.1.100
-	check_err $?
-	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
-	check_err $?
-	cleanup
-
-	if [ $ret -ne 0 ]; then
-                echo -e ${RED}"FAIL: $TYPE"${NC}
-                return 1
-        fi
-        echo -e ${GREEN}"PASS: $TYPE"${NC}
-}
-
-attach_bpf()
-{
-	DEV=$1
-	SET=$2
-	GET=$3
-	mkdir -p ${BPF_PIN_TUNNEL_DIR}
-	bpftool prog loadall ${BPF_FILE} ${BPF_PIN_TUNNEL_DIR}/
-	tc qdisc add dev $DEV clsact
-	tc filter add dev $DEV egress bpf da object-pinned ${BPF_PIN_TUNNEL_DIR}/$SET
-	tc filter add dev $DEV ingress bpf da object-pinned ${BPF_PIN_TUNNEL_DIR}/$GET
-}
-
-cleanup()
-{
-        rm -rf ${BPF_PIN_TUNNEL_DIR}
-
-	ip netns delete at_ns0 2> /dev/null
-	ip link del veth1 2> /dev/null
-	ip link del ipip11 2> /dev/null
-}
-
-cleanup_exit()
-{
-	echo "CATCH SIGKILL or SIGINT, cleanup and exit"
-	cleanup
-	exit 0
-}
-
-check()
-{
-	ip link help 2>&1 | grep -q "\s$1\s"
-	if [ $? -ne 0 ];then
-		echo "SKIP $1: iproute2 not support"
-	cleanup
-	return 1
-	fi
-}
-
-enable_debug()
-{
-	echo 'file ipip.c +p' > /sys/kernel/debug/dynamic_debug/control
-}
-
-check_err()
-{
-	if [ $ret -eq 0 ]; then
-		ret=$1
-	fi
-}
-
-bpf_tunnel_test()
-{
-	local errors=0
-
-	echo "Testing IPIP tunnel..."
-	test_ipip
-	errors=$(( $errors + $? ))
-
-	return $errors
-}
-
-trap cleanup 0 3 6
-trap cleanup_exit 2 9
-
-cleanup
-bpf_tunnel_test
-
-if [ $? -ne 0 ]; then
-	echo -e "$(basename $0): ${RED}FAIL${NC}"
-	exit 1
-fi
-echo -e "$(basename $0): ${GREEN}PASS${NC}"
-exit 0

-- 
2.48.1