[PATCH bpf-next 05/10] selftests/bpf: test_tunnel: Move erspan tunnel tests to test_progs

["Bastien Curutchet (eBPF Foundation)" <bastien.curutchet@bootlin.com>]

erspan tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.

Add a new test in test_progs to test erspan tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_erspan() from the script.

Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
---
 .../testing/selftests/bpf/prog_tests/test_tunnel.c | 46 +++++++++++++++++++
 tools/testing/selftests/bpf/test_tunnel.sh         | 52 ----------------------
 2 files changed, 46 insertions(+), 52 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/test_tunnel.c b/tools/testing/selftests/bpf/prog_tests/test_tunnel.c
index f00727aedee0c283002c55a45a04a96013d39a5d..c45170dc55dd93cdf613cc5798b7df78e3080661 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_tunnel.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_tunnel.c
@@ -106,6 +106,9 @@
 #define IP6GRE_TUNL_DEV0 "ip6gre00"
 #define IP6GRE_TUNL_DEV1 "ip6gre11"
 
+#define ERSPAN_TUNL_DEV0 "erspan00"
+#define ERSPAN_TUNL_DEV1 "erspan11"
+
 #define PING_ARGS "-i 0.01 -c 3 -w 10 -q"
 
 static int config_device(void)
@@ -882,6 +885,47 @@ static void test_ip6gre_tunnel(enum ip6gre_test test)
 	test_tunnel_kern__destroy(skel);
 }
 
+enum erspan_test {
+	V1,
+	V2
+};
+
+static void test_erspan_tunnel(enum erspan_test test)
+{
+	struct test_tunnel_kern *skel;
+	int set_fd, get_fd;
+	int err;
+
+	skel = test_tunnel_kern__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "test_tunnel_kern__open_and_load"))
+		return;
+
+	switch (test) {
+	case V1:
+		err = add_ipv4_tunnel(ERSPAN_TUNL_DEV0, ERSPAN_TUNL_DEV1,
+				      "erspan", "seq key 2 erspan_ver 1 erspan 123");
+		break;
+	case V2:
+		err = add_ipv4_tunnel(ERSPAN_TUNL_DEV0, ERSPAN_TUNL_DEV1,
+				      "erspan",
+				      "seq key 2 erspan_ver 2 erspan_dir egress erspan_hwid 3");
+		break;
+	}
+	if (!ASSERT_OK(err, "add tunnel"))
+		goto done;
+
+	set_fd = bpf_program__fd(skel->progs.erspan_set_tunnel);
+	get_fd = bpf_program__fd(skel->progs.erspan_get_tunnel);
+	if (generic_attach(ERSPAN_TUNL_DEV1, get_fd, set_fd))
+		goto done;
+
+	ping_dev0();
+	ping_dev1();
+done:
+	delete_tunnel(ERSPAN_TUNL_DEV0, ERSPAN_TUNL_DEV1);
+	test_tunnel_kern__destroy(skel);
+}
+
 #define RUN_TEST(name, ...)						\
 	({								\
 		if (test__start_subtest(#name)) {			\
@@ -905,6 +949,8 @@ static void *test_tunnel_run_tests(void *arg)
 	RUN_TEST(gre_tunnel, GRETAP_NOKEY);
 	RUN_TEST(ip6gre_tunnel, IP6GRE);
 	RUN_TEST(ip6gre_tunnel, IP6GRETAP);
+	RUN_TEST(erspan_tunnel, V1);
+	RUN_TEST(erspan_tunnel, V2);
 
 	return NULL;
 }
diff --git a/tools/testing/selftests/bpf/test_tunnel.sh b/tools/testing/selftests/bpf/test_tunnel.sh
index 367af24d2ca5263be279a1a684daac161e7ec906..e8e7839fb5b5f69a50a6f1fcd606d1cb6dee3c64 100755
--- a/tools/testing/selftests/bpf/test_tunnel.sh
+++ b/tools/testing/selftests/bpf/test_tunnel.sh
@@ -64,29 +64,6 @@ config_device()
 	ip addr add dev veth1 172.16.1.200/24
 }
 
-add_erspan_tunnel()
-{
-	# at_ns0 namespace
-	if [ "$1" == "v1" ]; then
-		ip netns exec at_ns0 \
-		ip link add dev $DEV_NS type $TYPE seq key 2 \
-		local 172.16.1.100 remote 172.16.1.200 \
-		erspan_ver 1 erspan 123
-	else
-		ip netns exec at_ns0 \
-		ip link add dev $DEV_NS type $TYPE seq key 2 \
-		local 172.16.1.100 remote 172.16.1.200 \
-		erspan_ver 2 erspan_dir egress erspan_hwid 3
-	fi
-	ip netns exec at_ns0 ip link set dev $DEV_NS up
-	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
-
-	# root namespace
-	ip link add dev $DEV type $TYPE external
-	ip link set dev $DEV up
-	ip addr add dev $DEV 10.1.1.200/24
-}
-
 add_ip6erspan_tunnel()
 {
 
@@ -189,30 +166,6 @@ add_ip6tnl_tunnel()
 	ip link set dev $DEV up
 }
 
-test_erspan()
-{
-	TYPE=erspan
-	DEV_NS=erspan00
-	DEV=erspan11
-	ret=0
-
-	check $TYPE
-	config_device
-	add_erspan_tunnel $1
-	attach_bpf $DEV erspan_set_tunnel erspan_get_tunnel
-	ping $PING_ARG 10.1.1.100
-	check_err $?
-	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
-	check_err $?
-	cleanup
-
-	if [ $ret -ne 0 ]; then
-                echo -e ${RED}"FAIL: $TYPE"${NC}
-                return 1
-        fi
-        echo -e ${GREEN}"PASS: $TYPE"${NC}
-}
-
 test_ip6erspan()
 {
 	TYPE=ip6erspan
@@ -388,7 +341,6 @@ cleanup()
 	ip link del ip6ip6tnl11 2> /dev/null
 	ip link del geneve11 2> /dev/null
 	ip link del ip6geneve11 2> /dev/null
-	ip link del erspan11 2> /dev/null
 	ip link del ip6erspan11 2> /dev/null
 }
 
@@ -426,10 +378,6 @@ bpf_tunnel_test()
 {
 	local errors=0
 
-	echo "Testing ERSPAN tunnel..."
-	test_erspan v2
-	errors=$(( $errors + $? ))
-
 	echo "Testing IP6ERSPAN tunnel..."
 	test_ip6erspan v2
 	errors=$(( $errors + $? ))

-- 
2.48.1