[PATCH] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[PATCH] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Xing Guo]

Recently, I noticed a selftest failure in my local environment. The
test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back.  However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop.  This patch
helps fix it by adding the missing fsync() call.

Signed-off-by: Xing Guo <higuoxing@gmail.com>
---
 tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
index bb143de68875..4f071943ffb0 100644
--- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
+++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
@@ -140,6 +140,7 @@ static void test_parse_test_list_file(void)
 	fprintf(fp, "testA/subtest2\n");
 	fprintf(fp, "testC_no_eof_newline");
 	fflush(fp);
+	fsync(fd);
 
 	if (!ASSERT_OK(ferror(fp), "prepare tmp"))
 		goto out_fclose;
-- 
2.51.0

Re: [PATCH] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Jiri Olsa]

On Tue, Oct 14, 2025 at 04:03:23PM +0800, Xing Guo wrote:
> Recently, I noticed a selftest failure in my local environment. The
> test_parse_test_list_file writes some data to
> /tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
> the data back.  However, after writing data to that file, we forget to
> call fsync() and it's causing testing failure in my laptop.  This patch
> helps fix it by adding the missing fsync() call.
> 
> Signed-off-by: Xing Guo <higuoxing@gmail.com>
> ---
>  tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> index bb143de68875..4f071943ffb0 100644
> --- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> +++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> @@ -140,6 +140,7 @@ static void test_parse_test_list_file(void)
>  	fprintf(fp, "testA/subtest2\n");
>  	fprintf(fp, "testC_no_eof_newline");
>  	fflush(fp);
> +	fsync(fd);


could we just close the fp stream instead flushing it twice?

maybe something like below, but not sure ferror will work
after the fclose call

jirka


---
diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
index bb143de68875..5a4c1bca2a1e 100644
--- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
+++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
@@ -139,10 +139,10 @@ static void test_parse_test_list_file(void)
 	fprintf(fp, "testA/subtest # subtest duplicate\n");
 	fprintf(fp, "testA/subtest2\n");
 	fprintf(fp, "testC_no_eof_newline");
-	fflush(fp);
+	fclose(fp);
 
 	if (!ASSERT_OK(ferror(fp), "prepare tmp"))
-		goto out_fclose;
+		goto out_remove;
 
 	init_test_filter_set(&set);
 
@@ -160,8 +160,6 @@ static void test_parse_test_list_file(void)
 
 	free_test_filter_set(&set);
 
-out_fclose:
-	fclose(fp);
 out_remove:
 	remove(tmpfile);
 }

Re: [PATCH] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Andrii Nakryiko]

On Tue, Oct 14, 2025 at 5:39 AM Jiri Olsa <olsajiri@gmail.com> wrote:
>
> On Tue, Oct 14, 2025 at 04:03:23PM +0800, Xing Guo wrote:
> > Recently, I noticed a selftest failure in my local environment. The
> > test_parse_test_list_file writes some data to
> > /tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
> > the data back.  However, after writing data to that file, we forget to
> > call fsync() and it's causing testing failure in my laptop.  This patch
> > helps fix it by adding the missing fsync() call.
> >
> > Signed-off-by: Xing Guo <higuoxing@gmail.com>
> > ---
> >  tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> > index bb143de68875..4f071943ffb0 100644
> > --- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> > +++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> > @@ -140,6 +140,7 @@ static void test_parse_test_list_file(void)
> >       fprintf(fp, "testA/subtest2\n");
> >       fprintf(fp, "testC_no_eof_newline");
> >       fflush(fp);
> > +     fsync(fd);
>
>
> could we just close the fp stream instead flushing it twice?
>
> maybe something like below, but not sure ferror will work
> after the fclose call
>
> jirka
>
>
> ---
> diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> index bb143de68875..5a4c1bca2a1e 100644
> --- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> +++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> @@ -139,10 +139,10 @@ static void test_parse_test_list_file(void)
>         fprintf(fp, "testA/subtest # subtest duplicate\n");
>         fprintf(fp, "testA/subtest2\n");
>         fprintf(fp, "testC_no_eof_newline");
> -       fflush(fp);
> +       fclose(fp);

we should probably fclose() after ferror().

but the original fix works, though I think we should do fsync(fp)
instead to say within FILE-based APIs.

pw-bot: cr


>
>         if (!ASSERT_OK(ferror(fp), "prepare tmp"))
> -               goto out_fclose;
> +               goto out_remove;
>
>         init_test_filter_set(&set);
>
> @@ -160,8 +160,6 @@ static void test_parse_test_list_file(void)
>
>         free_test_filter_set(&set);
>
> -out_fclose:
> -       fclose(fp);
>  out_remove:
>         remove(tmpfile);
>  }

[PATCH v2] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Xing Guo]

Thanks for reviewing! Here's the revised patch.

---
 tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
index bb143de68875..0f99f06116ea 100644
--- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
+++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
@@ -140,9 +140,11 @@ static void test_parse_test_list_file(void)
 	fprintf(fp, "testA/subtest2\n");
 	fprintf(fp, "testC_no_eof_newline");
 	fflush(fp);
-
-	if (!ASSERT_OK(ferror(fp), "prepare tmp"))
-		goto out_fclose;
+	if (!ASSERT_OK(ferror(fp), "prepare tmp")) {
+		fclose(fp);
+		goto out_remove;
+	}
+	fclose(fp);
 
 	init_test_filter_set(&set);
 
@@ -160,8 +162,6 @@ static void test_parse_test_list_file(void)
 
 	free_test_filter_set(&set);
 
-out_fclose:
-	fclose(fp);
 out_remove:
 	remove(tmpfile);
 }
-- 
2.51.0

Re: [PATCH v2] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Alexei Starovoitov]

On Tue, Oct 14, 2025 at 7:43 PM Xing Guo <higuoxing@gmail.com> wrote:
>
> Thanks for reviewing! Here's the revised patch.

Please send it as a proper patch with SOB, etc.

[PATCH v2] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Xing Guo]

Recently, I noticed a selftest failure in my local environment. The
test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back.  However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop.  This patch
helps fix it by adding the missing fsync() call.

Signed-off-by: Xing Guo <higuoxing@gmail.com>
---
 tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
index bb143de68875..0f99f06116ea 100644
--- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
+++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
@@ -140,9 +140,11 @@ static void test_parse_test_list_file(void)
 	fprintf(fp, "testA/subtest2\n");
 	fprintf(fp, "testC_no_eof_newline");
 	fflush(fp);
-
-	if (!ASSERT_OK(ferror(fp), "prepare tmp"))
-		goto out_fclose;
+	if (!ASSERT_OK(ferror(fp), "prepare tmp")) {
+		fclose(fp);
+		goto out_remove;
+	}
+	fclose(fp);
 
 	init_test_filter_set(&set);
 
@@ -160,8 +162,6 @@ static void test_parse_test_list_file(void)
 
 	free_test_filter_set(&set);
 
-out_fclose:
-	fclose(fp);
 out_remove:
 	remove(tmpfile);
 }
-- 
2.51.0

Re: [PATCH v2] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to bpf/bpf-next.git (master)
by Andrii Nakryiko <andrii@kernel.org>:

On Wed, 15 Oct 2025 10:50:49 +0800 you wrote:
> Recently, I noticed a selftest failure in my local environment. The
> test_parse_test_list_file writes some data to
> /tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
> the data back.  However, after writing data to that file, we forget to
> call fsync() and it's causing testing failure in my laptop.  This patch
> helps fix it by adding the missing fsync() call.
> 
> [...]

Here is the summary with links:
  - [v2] selftests: arg_parsing: Ensure data is flushed to disk before reading.
    https://git.kernel.org/bpf/bpf-next/c/27aab47b347e

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH v2] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Andrii Nakryiko]

On Tue, Oct 14, 2025 at 7:50 PM Xing Guo <higuoxing@gmail.com> wrote:
>
> Recently, I noticed a selftest failure in my local environment. The
> test_parse_test_list_file writes some data to
> /tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
> the data back.  However, after writing data to that file, we forget to
> call fsync() and it's causing testing failure in my laptop.  This patch
> helps fix it by adding the missing fsync() call.
>
> Signed-off-by: Xing Guo <higuoxing@gmail.com>
> ---
>  tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>

I accidentally applied it to bpf-next tree and had to drop it from there.

It actually doesn't apply to bpf tree cleanly, so please rebase and resend.

But first, did you validate that fclose() actually fixes the issue for
you? Because I don't think fclose() will call fsync(), will it?
fclose() will basically do the same thing as should be done with
fflush() anyways, so I have my doubts.

Furthermore, your commit message doesn't correspond to your patch.
There is no fsync() call here, please fix that as well.

> diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> index bb143de68875..0f99f06116ea 100644
> --- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> +++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> @@ -140,9 +140,11 @@ static void test_parse_test_list_file(void)
>         fprintf(fp, "testA/subtest2\n");
>         fprintf(fp, "testC_no_eof_newline");
>         fflush(fp);
> -
> -       if (!ASSERT_OK(ferror(fp), "prepare tmp"))
> -               goto out_fclose;
> +       if (!ASSERT_OK(ferror(fp), "prepare tmp")) {
> +               fclose(fp);
> +               goto out_remove;
> +       }
> +       fclose(fp);
>
>         init_test_filter_set(&set);
>
> @@ -160,8 +162,6 @@ static void test_parse_test_list_file(void)
>
>         free_test_filter_set(&set);
>
> -out_fclose:
> -       fclose(fp);
>  out_remove:
>         remove(tmpfile);
>  }
> --
> 2.51.0
>

[PATCH v3] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Xing Guo]

test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back.  However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop.  This patch
helps fix it by adding the missing fsync() call.
---
 tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
index fbf0d9c2f58b..e27d66b75fb1 100644
--- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
+++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
@@ -144,6 +144,9 @@ static void test_parse_test_list_file(void)
 	if (!ASSERT_OK(ferror(fp), "prepare tmp"))
 		goto out_fclose;
 
+	if (!ASSERT_OK(fsync(fileno(fp)), "fsync tmp"))
+		goto out_fclose;
+
 	init_test_filter_set(&set);
 
 	if (!ASSERT_OK(parse_test_list_file(tmpfile, &set, true), "parse file"))
-- 
2.51.0

Re: [PATCH v2] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Xing Guo]

On Thu, Oct 16, 2025 at 12:20 AM Andrii Nakryiko
<andrii.nakryiko@gmail.com> wrote:
>
> On Tue, Oct 14, 2025 at 7:50 PM Xing Guo <higuoxing@gmail.com> wrote:
> >
> > Recently, I noticed a selftest failure in my local environment. The
> > test_parse_test_list_file writes some data to
> > /tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
> > the data back.  However, after writing data to that file, we forget to
> > call fsync() and it's causing testing failure in my laptop.  This patch
> > helps fix it by adding the missing fsync() call.
> >
> > Signed-off-by: Xing Guo <higuoxing@gmail.com>
> > ---
> >  tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 10 +++++-----
> >  1 file changed, 5 insertions(+), 5 deletions(-)
> >
>
> I accidentally applied it to bpf-next tree and had to drop it from there.
>
> It actually doesn't apply to bpf tree cleanly, so please rebase and resend.
>
> But first, did you validate that fclose() actually fixes the issue for
> you? Because I don't think fclose() will call fsync(), will it?
> fclose() will basically do the same thing as should be done with
> fflush() anyways, so I have my doubts.

Thanks for pointing this out.  Adding fclose() resolves the issue on
my laptop too.
I prefer switching back to using fsync() according to your comment.

Best Regards,
Xing.

>
> Furthermore, your commit message doesn't correspond to your patch.
> There is no fsync() call here, please fix that as well.
>
> > diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> > index bb143de68875..0f99f06116ea 100644
> > --- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> > +++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> > @@ -140,9 +140,11 @@ static void test_parse_test_list_file(void)
> >         fprintf(fp, "testA/subtest2\n");
> >         fprintf(fp, "testC_no_eof_newline");
> >         fflush(fp);
> > -
> > -       if (!ASSERT_OK(ferror(fp), "prepare tmp"))
> > -               goto out_fclose;
> > +       if (!ASSERT_OK(ferror(fp), "prepare tmp")) {
> > +               fclose(fp);
> > +               goto out_remove;
> > +       }
> > +       fclose(fp);
> >
> >         init_test_filter_set(&set);
> >
> > @@ -160,8 +162,6 @@ static void test_parse_test_list_file(void)
> >
> >         free_test_filter_set(&set);
> >
> > -out_fclose:
> > -       fclose(fp);
> >  out_remove:
> >         remove(tmpfile);
> >  }
> > --
> > 2.51.0
> >

[PATCH bpf v4] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Xing Guo]

test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back.  However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop.  This patch
helps fix it by adding the missing fsync() call.
---
 tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
index fbf0d9c2f58b..e27d66b75fb1 100644
--- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
+++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
@@ -144,6 +144,9 @@ static void test_parse_test_list_file(void)
 	if (!ASSERT_OK(ferror(fp), "prepare tmp"))
 		goto out_fclose;
 
+	if (!ASSERT_OK(fsync(fileno(fp)), "fsync tmp"))
+		goto out_fclose;
+
 	init_test_filter_set(&set);
 
 	if (!ASSERT_OK(parse_test_list_file(tmpfile, &set, true), "parse file"))
-- 
2.51.0

[PATCH bpf v5] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Xing Guo]

test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back.  However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop.  This patch
helps fix it by adding the missing fsync() call.

Signed-off-by: Xing Guo <higuoxing@gmail.com>
---
 tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
index fbf0d9c2f58b..e27d66b75fb1 100644
--- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
+++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
@@ -144,6 +144,9 @@ static void test_parse_test_list_file(void)
 	if (!ASSERT_OK(ferror(fp), "prepare tmp"))
 		goto out_fclose;
 
+	if (!ASSERT_OK(fsync(fileno(fp)), "fsync tmp"))
+		goto out_fclose;
+
 	init_test_filter_set(&set);
 
 	if (!ASSERT_OK(parse_test_list_file(tmpfile, &set, true), "parse file"))
-- 
2.51.0

[PATCH bpf v6] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Xing Guo]

test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back.  However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop.  This patch
helps fix it by adding the missing fsync() call.

Fixes: 64276f01dce8 ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
---
 tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
index fbf0d9c2f58b..e27d66b75fb1 100644
--- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
+++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
@@ -144,6 +144,9 @@ static void test_parse_test_list_file(void)
 	if (!ASSERT_OK(ferror(fp), "prepare tmp"))
 		goto out_fclose;
 
+	if (!ASSERT_OK(fsync(fileno(fp)), "fsync tmp"))
+		goto out_fclose;
+
 	init_test_filter_set(&set);
 
 	if (!ASSERT_OK(parse_test_list_file(tmpfile, &set, true), "parse file"))
-- 
2.51.0

Re: [PATCH bpf v6] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[Andrii Nakryiko]

On Wed, Oct 15, 2025 at 8:53 PM Xing Guo <higuoxing@gmail.com> wrote:
>
> test_parse_test_list_file writes some data to
> /tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
> the data back.  However, after writing data to that file, we forget to
> call fsync() and it's causing testing failure in my laptop.  This patch
> helps fix it by adding the missing fsync() call.
>
> Fixes: 64276f01dce8 ("selftests/bpf: Test_progs can read test lists from file")
> Signed-off-by: Xing Guo <higuoxing@gmail.com>
> ---
>  tools/testing/selftests/bpf/prog_tests/arg_parsing.c | 3 +++
>  1 file changed, 3 insertions(+)
>

applied to bpf, thanks!

Given you can reproduce this issue locally, do you mind capturing
strace log before the fix, with fsync fix, and also with fclose, which
you say also fixes the issue. But that makes little sense to me, so
I'd like to compare what's going on at syscall level to try to get
some idea. Thanks!

> diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> index fbf0d9c2f58b..e27d66b75fb1 100644
> --- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> +++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
> @@ -144,6 +144,9 @@ static void test_parse_test_list_file(void)
>         if (!ASSERT_OK(ferror(fp), "prepare tmp"))
>                 goto out_fclose;
>
> +       if (!ASSERT_OK(fsync(fileno(fp)), "fsync tmp"))
> +               goto out_fclose;
> +
>         init_test_filter_set(&set);
>
>         if (!ASSERT_OK(parse_test_list_file(tmpfile, &set, true), "parse file"))
> --
> 2.51.0
>

strace log before the fix, with fsync fix and with fclose fix.

[Xing Guo]

Test with fsync:

=> bzImage
===> Booting
No EFI environment detected.
early console in extract_kernel
input_data: 0x0000000003e8c2c4
input_len: 0x0000000000d59ef7
output: 0x0000000001000000
output_len: 0x0000000003156b50
kernel_total_size: 0x0000000003c30000
needed_size: 0x0000000003e00000
trampoline_32bit: 0x0000000000000000
Physical KASLR using RDRAND RDTSC...
Virtual KASLR using RDRAND RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel (entry_offset: 0x0000000002b46b90).
[    0.000000] Linux version 6.18.0-rc1-g1c64efcb083c (v@laptop) (gcc (GCC) 15.2.1 20250813, GNU ld (GNU Binutils) 2.45.0) #1 SMP PREEMPT_DYNAMIC Mon Oct 20 14:25:28 CST 2025
[    0.000000] Command line: rootfstype=9p rootflags=trans=virtio,cache=mmap,msize=1048576 rw earlyprintk=serial,0,115200 printk.devkmsg=on console=0,115200 loglevel=7 raid=noautodetect init=/tmp/vmtest-initukOgi.sh panic=-1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] printk: legacy bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2495.911 MHz processor
[    0.000120] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000480] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000982] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
Memory KASLR using RDRAND RDTSC...
[    0.001610] last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[    0.005879] found SMP MP-table at [mem 0x000f66a0-0x000f66af]
[    0.006221] Using GB pages for direct mapping
[    0.006673] ACPI: Early table checksum verification disabled
[    0.007012] ACPI: RSDP 0x00000000000F64B0 000014 (v00 BOCHS )
[    0.007354] ACPI: RSDT 0x00000000BFFE2379 000034 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007842] ACPI: FACP 0x00000000BFFE2225 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008355] ACPI: DSDT 0x00000000BFFE0040 0021E5 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008844] ACPI: FACS 0x00000000BFFE0000 000040
[    0.009109] ACPI: APIC 0x00000000BFFE2299 000080 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.009597] ACPI: HPET 0x00000000BFFE2319 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010084] ACPI: WAET 0x00000000BFFE2351 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010629] ACPI: Reserving FACP table memory at [mem 0xbffe2225-0xbffe2298]
[    0.011069] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe2224]
[    0.011502] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[    0.011934] ACPI: Reserving APIC table memory at [mem 0xbffe2299-0xbffe2318]
[    0.012367] ACPI: Reserving HPET table memory at [mem 0xbffe2319-0xbffe2350]
[    0.012786] ACPI: Reserving WAET table memory at [mem 0xbffe2351-0xbffe2378]
[    0.013378] No NUMA configuration found
[    0.013607] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.014004] NODE_DATA(0) allocated [mem 0x13fff9e80-0x13fffdfff]
[    0.014378] Zone ranges:
[    0.014528]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.014889]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.015247]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.015608] Movable zone start for each node
[    0.015855] Early memory node ranges
[    0.016062]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.016426]   node   0: [mem 0x0000000000100000-0x00000000bffdffff]
[    0.016789]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.017159] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.017683] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.018057] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.026254] On node 0, zone Normal: 32 pages in unavailable ranges
[    0.026848] ACPI: PM-Timer IO Port: 0x608
[    0.027098] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.027476] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.027885] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.028255] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.028649] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.029035] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.029434] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.029832] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.030207] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.030512] TSC deadline timer available
[    0.030744] CPU topo: Max. logical packages:   1
[    0.031014] CPU topo: Max. logical dies:       1
[    0.031283] CPU topo: Max. dies per package:   1
[    0.031560] CPU topo: Max. threads per core:   1
[    0.031830] CPU topo: Num. cores per package:     2
[    0.032114] CPU topo: Num. threads per package:   2
[    0.032403] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[    0.032774] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.033144] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.037225] setup_percpu: NR_CPUS:128 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.037927] percpu: Embedded 56 pages/cpu s191568 r8192 d29616 u1048576
[    0.038336] Kernel command line: rootfstype=9p rootflags=trans=virtio,cache=mmap,msize=1048576 rw earlyprintk=serial,0,115200 printk.devkmsg=on console=0,115200 loglevel=7 raid=noautodetect init=/tmp/vmtest-initukOgi.sh panic=-1
[    0.039556] Unknown kernel command line parameters "raid=noautodetect", will be passed to user space.
[    0.040118] random: crng init done
[    0.040320] printk: log buffer data + meta data: 2097152 + 7340032 = 9437184 bytes
[    0.041143] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.041822] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.042345] software IO TLB: area num 2.
[    0.054949] Fallback order for Node 0: 0
[    0.054955] Built 1 zonelists, mobility grouping on.  Total pages: 1048446
[    0.055589] Policy zone: Normal
[    0.055771] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.061934] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Poking KASLR using RDRAND RDTSC...
[    0.069239] ftrace: allocating 41991 entries in 166 pages
[    0.069557] ftrace: allocated 166 pages with 4 groups
[    0.069904] Dynamic Preempt: full
[    0.070234] Running RCU self tests
[    0.070431] Running RCU synchronous self tests
[    0.070676] rcu: Preemptible hierarchical RCU implementation.
[    0.070991] rcu: 	RCU event tracing is enabled.
[    0.071243] rcu: 	RCU lockdep checking is enabled.
[    0.071509] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.071877] 	Trampoline variant of Tasks RCU enabled.
[    0.072154] 	Rude variant of Tasks RCU enabled.
[    0.072404] 	Tracing variant of Tasks RCU enabled.
[    0.072666] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.073086] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.073471] Running RCU synchronous self tests
[    0.073717] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    0.074199] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    0.074706] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    0.078193] NR_IRQS: 8448, nr_irqs: 440, preallocated irqs: 16
[    0.078723] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.079277] Console: colour *CGA 80x25
[    0.079522] printk: legacy console [ttyS0] enabled
[    0.079522] printk: legacy console [ttyS0] enabled
[    0.080060] printk: legacy bootconsole [earlyser0] disabled
[    0.080060] printk: legacy bootconsole [earlyser0] disabled
[    0.080690] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.081126] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.081361] ... MAX_LOCK_DEPTH:          48
[    0.081599] ... MAX_LOCKDEP_KEYS:        8192
[    0.081847] ... CLASSHASH_SIZE:          4096
[    0.082094] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.082348] ... MAX_LOCKDEP_CHAINS:      65536
[    0.082600] ... CHAINHASH_SIZE:          32768
[    0.082852]  memory used by lock dependency info: 6429 kB
[    0.083160]  memory used for stack traces: 4224 kB
[    0.083440]  per task-struct memory footprint: 1920 bytes
[    0.083763] ACPI: Core revision 20250807
[    0.084103] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.084694] APIC: Switch to symmetric I/O mode setup
[    0.085714] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.090704] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23fa231d958, max_idle_ns: 440795322936 ns
[    0.091317] Calibrating delay loop (skipped), value calculated using timer frequency.. 4991.82 BogoMIPS (lpj=2495911)
[    0.092422] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.092866] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.093308] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.093654] mitigations: Enabled attack vectors: user_kernel, user_user, SMT mitigations: auto
[    0.094147] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.094308] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.094641] ITS: Mitigation: Aligned branch/return thunks
[    0.095309] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.095790] Spectre V2 : WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!
[    0.096310] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.096699] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.097308] active return thunk: its_return_thunk
[    0.097579] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.097993] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.098308] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.098649] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[    0.099002] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[    0.099308] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[    0.099668] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.100308] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.100641] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
[    0.100979] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
[    0.101308] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[    0.101643] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
[    0.102056] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[    0.121102] Freeing SMP alternatives memory: 44K
[    0.121310] pid_max: default: 32768 minimum: 301
[    0.121614] LSM: initializing lsm=capability,selinux,bpf,ima
[    0.122011] SELinux:  Initializing.
[    0.122905] LSM support for eBPF active
[    0.123189] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.123312] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.124630] Running RCU synchronous self tests
[    0.124880] Running RCU synchronous self tests
[    0.125283] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-11850H @ 2.50GHz (family: 0x6, model: 0x8d, stepping: 0x1)
[    0.125307] Performance Events: Icelake events, full-width counters, Intel PMU driver.
[    0.125316] ... version:                   2
[    0.125551] ... bit width:                 48
[    0.125792] ... generic counters:          8
[    0.126039] ... generic bitmap:            00000000000000ff
[    0.126309] ... fixed-purpose counters:    3
[    0.126544] ... fixed-purpose bitmap:      0000000000000007
[    0.126850] ... value mask:                0000ffffffffffff
[    0.127171] ... max period:                00007fffffffffff
[    0.127309] ... global_ctrl mask:          00000007000000ff
[    0.127755] signal: max sigframe size: 3232
[    0.128049] rcu: Hierarchical SRCU implementation.
[    0.128309] rcu: 	Max phase no-delay instances is 400.
[    0.128656] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.131129] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.133326] smp: Bringing up secondary CPUs ...
[    0.133793] smpboot: x86: Booting SMP configuration:
[    0.134077] .... node  #0, CPUs:      #1
[    0.194429] smp: Brought up 1 node, 2 CPUs
[    0.194801] smpboot: Total of 2 processors activated (10056.41 BogoMIPS)
[    0.195451] Memory: 3983096K/4193784K available (16460K kernel code, 9137K rwdata, 10296K rodata, 3224K init, 13904K bss, 200612K reserved, 0K cma-reserved)
[    0.196802] devtmpfs: initialized
[    0.197705] Running RCU synchronous self tests
[    0.197724] Running RCU synchronous self tests
[    0.198327] Running RCU Tasks wait API self tests
[    0.198605] Running RCU Tasks Rude wait API self tests
[    0.198605] Running RCU Tasks Trace wait API self tests
[    0.212320] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.213318] posixtimers hash table entries: 1024 (order: 4, 73728 bytes, linear)
[    0.213778] futex hash table entries: 512 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[    0.215026] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.215651] audit: initializing netlink subsys (disabled)
[    0.215975] audit: type=2000 audit(1760950234.129:1): state=initialized audit_enabled=0 res=1
[    0.215975] thermal_sys: Registered thermal governor 'step_wise'
[    0.216313] cpuidle: using governor ladder
[    0.216549] cpuidle: using governor menu
[    0.216719] PCI: Using configuration type 1 for base access
[    0.217361] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.221327] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.221739] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.222125] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.222310] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.226687] ACPI: Added _OSI(Module Device)
[    0.226935] ACPI: Added _OSI(Processor Device)
[    0.227207] ACPI: Added _OSI(Processor Aggregator Device)
[    0.229340] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.232368] Callback from call_rcu_tasks_trace() invoked.
[    0.235533] ACPI: Interpreter enabled
[    0.235796] ACPI: PM: (supports S0 S3 S5)
[    0.236069] ACPI: Using IOAPIC for interrupt routing
[    0.236331] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.236843] PCI: Using E820 reservations for host bridge windows
[    0.237329] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.240786] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.241149] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    0.242311] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.242883] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[    0.243600] PCI host bridge to bus 0000:00
[    0.243837] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.244214] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.244310] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.244724] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.245156] pci_bus 0000:00: root bus resource [mem 0x7000000000-0x707fffffff window]
[    0.245310] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.245673] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[    0.246591] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[    0.247420] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[    0.248328] pci 0000:00:01.1: BAR 4 [io  0xc100-0xc10f]
[    0.248642] pci 0000:00:01.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    0.249030] pci 0000:00:01.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    0.249309] pci 0000:00:01.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    0.249688] pci 0000:00:01.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    0.250246] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    0.251477] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.251880] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.252545] pci 0000:00:02.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
[    0.253885] pci 0000:00:02.0: BAR 0 [io  0xc000-0xc03f]
[    0.254182] pci 0000:00:02.0: BAR 1 [mem 0xfebfc000-0xfebfcfff]
[    0.254324] pci 0000:00:02.0: BAR 4 [mem 0x7000000000-0x7000003fff 64bit pref]
[    0.255645] pci 0000:00:03.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
[    0.256844] pci 0000:00:03.0: BAR 0 [io  0xc040-0xc07f]
[    0.257149] pci 0000:00:03.0: BAR 1 [mem 0xfebfd000-0xfebfdfff]
[    0.258324] pci 0000:00:03.0: BAR 4 [mem 0x7000004000-0x7000007fff 64bit pref]
[    0.259613] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint
[    0.260832] pci 0000:00:04.0: BAR 0 [io  0xc080-0xc0bf]
[    0.261184] pci 0000:00:04.0: BAR 1 [mem 0xfebfe000-0xfebfefff]
[    0.261325] pci 0000:00:04.0: BAR 4 [mem 0x7000008000-0x700000bfff 64bit pref]
[    0.263134] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint
[    0.265168] pci 0000:00:05.0: BAR 0 [io  0xc0c0-0xc0ff]
[    0.265314] pci 0000:00:05.0: BAR 1 [mem 0xfebff000-0xfebfffff]
[    0.265757] pci 0000:00:05.0: BAR 4 [mem 0x700000c000-0x700000ffff 64bit pref]
[    0.267612] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.268231] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.268398] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.268945] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.269350] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[    0.270333] iommu: Default domain type: Translated
[    0.270597] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.271452] pps_core: LinuxPPS API ver. 1 registered
[    0.271743] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.272316] PTP clock support registered
[    0.272995] NetLabel: Initializing
[    0.273310] NetLabel:  domain hash size = 128
[    0.273570] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.273927] NetLabel:  unlabeled traffic allowed by default
[    0.274272] PCI: Using ACPI for IRQ routing
[    0.274465] vgaarb: loaded
[    0.274500] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.274795] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.280370] clocksource: Switched to clocksource tsc-early
[    0.281133] pnp: PnP ACPI init
[    0.281769] pnp: PnP ACPI: found 5 devices
[    0.289844] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.290415] NET: Registered PF_INET protocol family
[    0.290777] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.297848] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 147456 bytes, linear)
[    0.298522] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.298961] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.299553] TCP bind hash table entries: 32768 (order: 10, 4718592 bytes, vmalloc hugepage)
[    0.300804] TCP: Hash tables configured (established 32768 bind 32768)
[    0.301263] MPTCP token hash table entries: 4096 (order: 6, 360448 bytes, linear)
[    0.301756] UDP hash table entries: 2048 (order: 7, 524288 bytes, linear)
[    0.302214] UDP-Lite hash table entries: 2048 (order: 7, 524288 bytes, linear)
[    0.302764] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.303109] NET: Registered PF_XDP protocol family
[    0.303403] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.303759] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.304105] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.304509] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.304905] pci_bus 0000:00: resource 8 [mem 0x7000000000-0x707fffffff window]
[    0.305377] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.305715] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.306089] PCI: CLS 0 bytes, default 64
[    0.306341] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.306745] software IO TLB: mapped [mem 0x00000000bbfe0000-0x00000000bffe0000] (64MB)
[    0.307232] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.308832] Initialise system trusted keyrings
[    0.309211] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.309854] fuse: init (API version 7.45)
[    0.310198] 9p: Installing v9fs 9p2000 file system support
[    0.316487] NET: Registered PF_ALG protocol family
[    0.316780] Key type asymmetric registered
[    0.317020] Asymmetric key parser 'x509' registered
[    0.317330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.317999] io scheduler mq-deadline registered
[    0.318314] io scheduler kyber registered
[    0.318877] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.321418] ACPI: button: Power Button [PWRF]
[    0.322909] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[    0.324646] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    0.326275] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[    0.327979] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[    0.348722] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.349392] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.383156] Linux agpgart interface v0.103
[    0.388755] brd: module loaded
[    0.391968] loop: module loaded
[    0.393512] tun: Universal TUN/TAP device driver, 1.6
[    0.394037] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.395029] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.395524] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.396292] Registered IR keymap rc-empty
[    0.396599] rc rc0: rc-core loopback device as /devices/virtual/rc/rc0
[    0.397085] rc rc0: lirc_dev: driver rc-loopback registered at minor = 0, raw IR receiver, raw IR transmitter
[    0.397743] input: rc-core loopback device as /devices/virtual/rc/rc0/input2
[    0.398328] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.398382] intel_powerclamp: CPU does not support MWAIT
[    0.399169] intel_pstate: CPU model not supported
[    0.400009] GACT probability NOT on
[    0.400294] Mirror/redirect action on
[    0.401060] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    0.401648] gre: GRE over IPv4 demultiplexer driver
[    0.401926] ip_gre: GRE over IPv4 tunneling driver
[    0.402863] Initializing XFRM netlink socket
[    0.403123] IPsec XFRM device driver
[    0.403385] NET: Registered PF_INET6 protocol family
[    0.404098] Segment Routing with IPv6
[    0.404336] In-situ OAM (IOAM) with IPv6
[    0.404579] mip6: Mobile IPv6
[    0.404769] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.405585] ip6_gre: GRE over IPv6 tunneling driver
[    0.406077] NET: Registered PF_PACKET protocol family
[    0.406426] 8021q: 802.1Q VLAN Support v1.8
[    0.406698] 9pnet: Installing 9P2000 support
[    0.408431] Callback from call_rcu_tasks() invoked.
[    0.408978] Key type dns_resolver registered
[    0.409316] NET: Registered PF_VSOCK protocol family
[    0.409606] mpls_gso: MPLS GSO support
[    0.410167] IPI shorthand broadcast: enabled
[    0.415090] sched_clock: Marking stable (407143234, 7165999)->(426414673, -12105440)
[    0.415764] registered taskstats version 1
[    0.421211] Loading compiled-in X.509 certificates
[    0.422166] Loaded X.509 cert 'Build time autogenerated kernel key: 3cee96964ddebecf1b0b1438932e28ffced7b530'
[    0.432570] Demotion targets for Node 0: null
[    0.433024] ima: No TPM chip found, activating TPM-bypass!
[    0.433370] ima: Allocated hash algorithm: sha1
[    0.433655] ima: No architecture policies found
[    0.437101] check access for rdinit=/init failed: -2, ignoring
[    0.814905] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    0.815557] 9pnet_virtio: no channels available for device
[    0.815804] 9pnet: Limiting 'msize' to 512000 as this is the maximum supported by transport virtio
[    0.816901] VFS: Mounted root (9p filesystem) on device 0:21.
[    0.817402] devtmpfs: mounted
[    0.822223] Freeing unused kernel image (initmem) memory: 3224K
[    0.822490] Write protecting the kernel read-only data: 30720k
[    0.823314] Freeing unused kernel image (text/rodata gap) memory: 1968K
[    0.823955] Freeing unused kernel image (rodata/data gap) memory: 1992K
[    0.824206] Run /tmp/vmtest-initukOgi.sh as init process
[    0.915935] vmtest: Mounting tmpfs at /dev/shm
[    0.968207] vmtest: Mounting tmpfs at /run
[    1.002366] vmtest: Mounting sysfs at /sys
[    1.010582] vmtest: Mounting debugfs at /sys/kernel/debug
[    1.018868] vmtest: Mounting tracefs at /sys/kernel/debug/tracing
[    1.027652] vmtest: Mounting cgroup2 at /sys/fs/cgroup
[    1.041118] vmtest: Mounting tmpfs at /mnt
[    1.049794] vmtest: Symlink /dev/fd to /proc/self/fd
[    1.055532] vmtest: Init done
[    1.132943] vmtest: Located qemu-guest-agent virtio port: /dev/vport0p1
[    1.133451] vmtest: Spawning qemu-ga in the background
===> Setting up VM
[    1.335318] tsc: Refined TSC clocksource calibration: 2495.988 MHz
[    1.336156] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa6bcc764, max_idle_ns: 440795206109 ns
[    1.337227] clocksource: Switched to clocksource tsc
[    1.423793] 9pnet: Limiting 'msize' to 512000 as this is the maximum supported by transport virtio
tty: ttyname error: Inappropriate ioctl for device
===> Running command
execve("./test_progs", ["./test_progs", "-t", "arg_parsing"], 0x7ffc8984ee30 /* 79 vars */) = 0
brk(NULL)                               = 0x55d43c4c0000
access("/etc/ld.so.preload", R_OK)      = 0
openat(AT_FDCWD, "/etc/ld.so.preload", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=20, ...}) = 0
mmap(NULL, 20, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0x7f58e4e24000
close(3)                                = 0
readlinkat(AT_FDCWD, "/proc/self/exe", "/home/v/linux_work/bpf/tools/tes"..., 4096) = 61
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58e4e22000
openat(AT_FDCWD, "/lib/lib/liblsp.so", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\24\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=19000, ...}) = 0
mmap(NULL, 4211528, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_DENYWRITE, -1, 0) = 0x7f58e4a1d000
mmap(0x7f58e4c00000, 2114376, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0) = 0x7f58e4c00000
munmap(0x7f58e4a1d000, 1978368)         = 0
munmap(0x7f58e4e05000, 115528)          = 0
mprotect(0x7f58e4c04000, 2093056, PROT_NONE) = 0
mmap(0x7f58e4e03000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f58e4e03000
close(3)                                = 0
munmap(0x7f58e4e24000, 20)              = 0
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=234755, ...}) = 0
mmap(NULL, 234755, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f58e4bc6000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libelf.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=112728, ...}) = 0
mmap(NULL, 110616, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58e4e06000
mmap(0x7f58e4e09000, 77824, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f58e4e09000
mmap(0x7f58e4e1c000, 16384, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7f58e4e1c000
mmap(0x7f58e4e20000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7f58e4e20000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libz.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=100368, ...}) = 0
mmap(NULL, 98320, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58e4bad000
mmap(0x7f58e4bb0000, 57344, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f58e4bb0000
mmap(0x7f58e4bbe000, 24576, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11000) = 0x7f58e4bbe000
mmap(0x7f58e4bc4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7f58e4bc4000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libpcap.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=309600, ...}) = 0
mmap(NULL, 311712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58e4b60000
mmap(0x7f58e4b64000, 172032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f58e4b64000
mmap(0x7f58e4b8e000, 110592, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2e000) = 0x7f58e4b8e000
mmap(0x7f58e4ba9000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x48000) = 0x7f58e4ba9000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libLLVM.so.20.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=157076696, ...}) = 0
mmap(NULL, 157875224, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58db4d0000
mmap(0x7f58dba17000, 90820608, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x547000) = 0x7f58dba17000
mmap(0x7f58e10b4000, 58408960, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5be4000) = 0x7f58e10b4000
mmap(0x7f58e4868000, 2318336, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9397000) = 0x7f58e4868000
mmap(0x7f58e4a9e000, 793624, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f58e4a9e000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000x\2\0\0\0\0\0"..., 832) = 832
pread64(3, "\6\0\0\0\4\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 896, 64) = 896
fstat(3, {st_mode=S_IFREG|0755, st_size=2149728, ...}) = 0
pread64(3, "\6\0\0\0\4\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 896, 64) = 896
mmap(NULL, 2174000, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58db2bd000
mmap(0x7f58db2e1000, 1515520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24000) = 0x7f58db2e1000
mmap(0x7f58db453000, 454656, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x196000) = 0x7f58db453000
mmap(0x7f58db4c2000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x204000) = 0x7f58db4c2000
mmap(0x7f58db4c8000, 31792, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f58db4c8000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14352, ...}) = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58db2bb000
mmap(NULL, 16400, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58db2b6000
mmap(0x7f58db2b7000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x7f58db2b7000
mmap(0x7f58db2b8000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f58db2b8000
mmap(0x7f58db2b9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f58db2b9000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libzstd.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=935880, ...}) = 0
mmap(NULL, 933944, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58db1d1000
mmap(0x7f58db1dd000, 811008, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc000) = 0x7f58db1dd000
mmap(0x7f58db2a3000, 69632, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd2000) = 0x7f58db2a3000
mmap(0x7f58db2b4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe3000) = 0x7f58db2b4000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libnl-genl-3.so.200", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=27576, ...}) = 0
mmap(NULL, 25432, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58db1ca000
mmap(0x7f58db1cc000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f58db1cc000
mmap(0x7f58db1ce000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f58db1ce000
mmap(0x7f58db1cf000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0x7f58db1cf000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libnl-3.so.200", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=133368, ...}) = 0
mmap(NULL, 131608, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58db1a9000
mmap(0x7f58db1b0000, 61440, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x7f58db1b0000
mmap(0x7f58db1bf000, 32768, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7f58db1bf000
mmap(0x7f58db1c7000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1e000) = 0x7f58db1c7000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libdbus-1.so.3", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=334008, ...}) = 0
mmap(NULL, 336624, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58db156000
mmap(0x7f58db164000, 200704, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) = 0x7f58db164000
mmap(0x7f58db195000, 69632, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3f000) = 0x7f58db195000
mmap(0x7f58db1a6000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4f000) = 0x7f58db1a6000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libffi.so.8", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=47336, ...}) = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58db154000
mmap(NULL, 46320, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58db148000
mmap(0x7f58db14a000, 28672, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f58db14a000
mmap(0x7f58db151000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9000) = 0x7f58db151000
mmap(0x7f58db152000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa000) = 0x7f58db152000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libedit.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=223344, ...}) = 0
mmap(NULL, 236672, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58db10e000
mmap(0x7f58db114000, 135168, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f58db114000
mmap(0x7f58db135000, 53248, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x27000) = 0x7f58db135000
mmap(0x7f58db142000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x34000) = 0x7f58db142000
mmap(0x7f58db145000, 11392, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f58db145000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libxml2.so.16", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1260488, ...}) = 0
mmap(NULL, 1262640, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58dafd9000
mmap(0x7f58daff3000, 864256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7f58daff3000
mmap(0x7f58db0c6000, 249856, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xed000) = 0x7f58db0c6000
mmap(0x7f58db103000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12a000) = 0x7f58db103000
mmap(0x7f58db10d000, 1072, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f58db10d000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libstdc++.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=22480456, ...}) = 0
mmap(NULL, 2699336, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58dad45000
mmap(0x7f58daddc000, 1396736, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x97000) = 0x7f58daddc000
mmap(0x7f58daf31000, 598016, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ec000) = 0x7f58daf31000
mmap(0x7f58dafc3000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x27e000) = 0x7f58dafc3000
mmap(0x7f58dafd5000, 12360, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f58dafd5000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1100400, ...}) = 0
mmap(NULL, 1102152, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58dac37000
mmap(0x7f58dac46000, 569344, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf000) = 0x7f58dac46000
mmap(0x7f58dacd1000, 466944, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9a000) = 0x7f58dacd1000
mmap(0x7f58dad43000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10b000) = 0x7f58dad43000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=906056, ...}) = 0
mmap(NULL, 180712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58dac0a000
mmap(0x7f58dac0e000, 143360, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f58dac0e000
mmap(0x7f58dac31000, 16384, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x27000) = 0x7f58dac31000
mmap(0x7f58dac35000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2a000) = 0x7f58dac35000
close(3)                                = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58dac08000
openat(AT_FDCWD, "/usr/lib/libsystemd.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1201600, ...}) = 0
mmap(NULL, 1202568, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58daae2000
mmap(0x7f58daaf7000, 798720, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f58daaf7000
mmap(0x7f58dabba000, 274432, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd8000) = 0x7f58dabba000
mmap(0x7f58dabfd000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11b000) = 0x7f58dabfd000
mmap(0x7f58dac07000, 2440, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f58dac07000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libncursesw.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=453896, ...}) = 0
mmap(NULL, 453856, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58daa73000
mmap(0x7f58daa80000, 290816, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd000) = 0x7f58daa80000
mmap(0x7f58daac7000, 90112, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x54000) = 0x7f58daac7000
mmap(0x7f58daadd000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6a000) = 0x7f58daadd000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libicuuc.so.76", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=2095152, ...}) = 0
mmap(NULL, 2102320, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58da871000
mmap(0x7f58da8b9000, 1142784, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x48000) = 0x7f58da8b9000
mmap(0x7f58da9d0000, 577536, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15f000) = 0x7f58da9d0000
mmap(0x7f58daa5d000, 81920, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ec000) = 0x7f58daa5d000
mmap(0x7f58daa71000, 5168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f58daa71000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libcap.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@|\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=43064, ...}) = 0
mmap(NULL, 45128, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58da865000
mmap(0x7f58da868000, 20480, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f58da868000
mmap(0x7f58da86d000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0x7f58da86d000
mmap(0x7f58da86f000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9000) = 0x7f58da86f000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libicudata.so.76", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=31859544, ...}) = 0
mmap(NULL, 31862784, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f58d8a02000
mmap(0x7f58da864000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1e61000) = 0x7f58da864000
close(3)                                = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58d8a00000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58d89fe000
mmap(NULL, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58d89fb000
arch_prctl(ARCH_SET_FS, 0x7f58d89fbb80) = 0
set_tid_address(0x7f58d89fbe50)         = 112
set_robust_list(0x7f58d89fbe60, 24)     = 0
rseq(0x7f58d89fb6a0, 0x20, 0, 0x53053053) = 0
mprotect(0x7f58db4c2000, 16384, PROT_READ) = 0
mprotect(0x7f58da864000, 4096, PROT_READ) = 0
mprotect(0x7f58da86f000, 4096, PROT_READ) = 0
mprotect(0x7f58dad43000, 4096, PROT_READ) = 0
mprotect(0x7f58dac35000, 4096, PROT_READ) = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58d89f9000
mprotect(0x7f58dafc3000, 69632, PROT_READ) = 0
mprotect(0x7f58daa5d000, 77824, PROT_READ) = 0
mprotect(0x7f58daadd000, 16384, PROT_READ) = 0
mprotect(0x7f58dabfd000, 36864, PROT_READ) = 0
mprotect(0x7f58e4bc4000, 4096, PROT_READ) = 0
mprotect(0x7f58db103000, 36864, PROT_READ) = 0
mprotect(0x7f58db142000, 8192, PROT_READ) = 0
mprotect(0x7f58db152000, 4096, PROT_READ) = 0
mprotect(0x7f58db1a6000, 8192, PROT_READ) = 0
mprotect(0x7f58db1c7000, 8192, PROT_READ) = 0
mprotect(0x7f58db1cf000, 4096, PROT_READ) = 0
mprotect(0x7f58db2b4000, 4096, PROT_READ) = 0
mprotect(0x7f58db2b9000, 4096, PROT_READ) = 0
mmap(NULL, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58d89f6000
mmap(NULL, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58d89f1000
mmap(NULL, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58d89e8000
mmap(NULL, 69632, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58d89d7000
mprotect(0x7f58e4868000, 2023424, PROT_READ) = 0
mprotect(0x7f58e4ba9000, 12288, PROT_READ) = 0
mprotect(0x7f58e4e20000, 4096, PROT_READ) = 0
mprotect(0x7f58e4e03000, 4096, PROT_READ) = 0
mprotect(0x55d437ac4000, 40960, PROT_READ) = 0
mprotect(0x7f58e4e66000, 8192, PROT_READ) = 0
prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
getrandom("\x0c\xeb\xed\x08\x34\xe9\x5a\x8e", 8, GRND_NONBLOCK) = 8
munmap(0x7f58e4bc6000, 234755)          = 0
prctl(PR_CAPBSET_READ, CAP_MAC_OVERRIDE) = 1
prctl(PR_CAPBSET_READ, 0x30 /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, CAP_CHECKPOINT_RESTORE) = 1
prctl(PR_CAPBSET_READ, 0x2c /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, 0x2a /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, 0x29 /* CAP_??? */) = -1 EINVAL (Invalid argument)
futex(0x7f58dafd56bc, FUTEX_WAKE_PRIVATE, 2147483647) = 0
brk(NULL)                               = 0x55d43c4c0000
brk(0x55d43c4f3000)                     = 0x55d43c4f3000
lseek(2, 0, SEEK_CUR)                   = -1 ESPIPE (Illegal seek)
fstat(2, {st_mode=S_IFCHR|0600, st_rdev=makedev(0xf7, 0x1), ...}) = 0
brk(0x55d43c514000)                     = 0x55d43c514000
brk(0x55d43c535000)                     = 0x55d43c535000
openat(AT_FDCWD, "/etc/lsp.exclude", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sysname="Linux", nodename="(none)", ...}) = 0
shmget(0xa5723213, 16384, IPC_CREAT|IPC_EXCL|0666) = -1 EEXIST (File exists)
shmget(0xa5723213, 16384, 000)          = 0
shmat(0, NULL, SHM_RDONLY)              = 0x7f58e4bfc000
rt_sigaction(SIGSEGV, {sa_handler=0x55d436f5045a, sa_mask=[], sa_flags=SA_RESTORER|SA_RESETHAND, sa_restorer=0x7f58db2fb540}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {sa_handler=0x7f58db3510b0, sa_mask=[], sa_flags=SA_RESTORER|SA_ONSTACK|SA_RESTART|SA_SIGINFO, sa_restorer=0x7f58db2fb540}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
mmap(NULL, 29888, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7f58e4bf4000
madvise(0x7f58e4bf4000, 4096, MADV_GUARD_INSTALL) = 0
rt_sigprocmask(SIG_BLOCK, ~[], [], 8)   = 0
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f58e4bfae50, parent_tid=0x7f58e4bfae50, exit_signal=0, stack=0x7f58e4bf4000, stack_size=0x6000, tls=0x7f58e4bfab80} => {parent_tid=[113]}, 88) = 113
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
futex(0x7f58db4cd164, FUTEX_WAKE_PRIVATE, 2147483647) = 0
timer_create(CLOCK_MONOTONIC, {sigev_value={sival_int=1012017504, sival_ptr=0x55d43c522960}, sigev_signo=SIGRTMIN, sigev_notify=SIGEV_THREAD_ID, sigev_notify_thread_id=113}, [0]) = 0
add_key("asymmetric", "libbpf_session_key", "0\202\00300\202\2\30\240\3\2\1\2\2\24]HD\257\377\227\344q\271\355:E\275\231\31_\343"..., 820, KEY_SPEC_SESSION_KEYRING) = 959557055
openat(AT_FDCWD, "/proc/sys/net/core/bpf_jit_enable", O_RDONLY) = 3
read(3, "1", 1)                         = 1
close(3)                                = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/possible", O_RDONLY|O_CLOEXEC) = 3
read(3, "0-1\n", 128)                   = 4
close(3)                                = 0
membarrier(MEMBARRIER_CMD_GLOBAL, 0)    = 0
delete_module("bpf_testmod", 0)         = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "bpf_testmod.ko", O_RDONLY) = 3
^[]3008;start=fc5e5268-1949-4e56-ab18-a0ff6c738f49;user=;hostname=(none);machineid=1cdaf5cebfab41c8bca955e04060bc11;bootid=bbdefdc8-92c6-462b-8daf-c56c9cfff90c;pid=83;type=shell;cwd=/^[\^[[?2004h[root@(none) /]# [    1.945384] bpf_testmod: loading out-of-tree module taints kernel.
[    1.945656] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
finit_module(3, "", 0)                  = 0
close(3)                                = 0
openat(AT_FDCWD, "/proc/self/ns/net", O_RDONLY) = 3
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=10, tv_nsec=0}}, NULL) = 0
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=10, tv_nsec=0}}, NULL) = 0
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=10, tv_nsec=0}}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, ~[], [], 8)   = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_DROPPABLE|MAP_ANONYMOUS, -1, 0) = 0x7f58e4e24000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f58e4e05000
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
getrandom("\x9e\x16\x03\x90\xe6\x0f\xf1\xa9\x75\xdf\xb8\xa7\x29\x72\x03\x86\xbb\x52\xd3\xd8\x95\x07\xde\xf2\xe2\x1f\x3a\xda\xd5\xa3\x42\x3e", 32, 0) = 32
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.UK5nUq", O_RDWR|O_CREAT|O_EXCL, 0600) = 4
fcntl(4, F_GETFL)                       = 0x8002 (flags O_RDWR|O_LARGEFILE)
fstat(4, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
write(4, "# comment\n  test_with_spaces    "..., 175) = 175
fsync(4)                                = 0
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.UK5nUq", O_RDONLY) = 5
fstat(5, {st_mode=S_IFREG|0600, st_size=175, ...}) = 0
read(5, "# comment\n  test_with_spaces    "..., 8192) = 175
read(5, "", 8192)                       = 0
close(5)                                = 0
close(4)                                = 0
unlink("/tmp/bpf_arg_parsing_test.UK5nUq") = 0
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=0, tv_nsec=0}}, NULL) = 0
sched_setaffinity(0, 128, [0 1])        = 0
sched_setaffinity(112, 128, [0 1])      = 0
setns(3, CLONE_NEWNET)                  = 0
fstat(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0xf7, 0x1), ...}) = 0
ioctl(1, TCGETS2, 0x7ffddb3d1b40)       = -1 ENOTTY (Inappropriate ioctl for device)
close(3)                                = 0
membarrier(MEMBARRIER_CMD_GLOBAL, 0)    = 0
delete_module("bpf_testmod", 0)         = 0
shmdt(0x7f58e4bfc000)                   = 0
write(1, "#7/1     arg_parsing/test_parse_"..., 160#7/1     arg_parsing/test_parse_test_list:OK
#7/2     arg_parsing/test_parse_test_list_file:OK
#7       arg_parsing:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
) = 160
exit_group(0)                           = ?
+++ exited with 0 +++


Diff with fclose:


diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
index e27d66b75fb1..1317676d041b 100644
--- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
+++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
@@ -141,16 +141,17 @@ static void test_parse_test_list_file(void)
 	fprintf(fp, "testC_no_eof_newline");
 	fflush(fp);
 
-	if (!ASSERT_OK(ferror(fp), "prepare tmp"))
-		goto out_fclose;
+	if (!ASSERT_OK(ferror(fp), "prepare tmp")) {
+		fclose(fp);
+		goto out_remove;
+	}
 
-	if (!ASSERT_OK(fsync(fileno(fp)), "fsync tmp"))
-		goto out_fclose;
+	fclose(fp);
 
 	init_test_filter_set(&set);
 
 	if (!ASSERT_OK(parse_test_list_file(tmpfile, &set, true), "parse file"))
-		goto out_fclose;
+		goto out_remove;
 
 	if (!ASSERT_EQ(set.cnt, 4, "test  count"))
 		goto out_free_set;
@@ -166,8 +167,6 @@ static void test_parse_test_list_file(void)
 
 out_free_set:
 	free_test_filter_set(&set);
-out_fclose:
-	fclose(fp);
 out_remove:
 	remove(tmpfile);
 }


Test with fclose:

=> bzImage
===> Booting
No EFI environment detected.
early console in extract_kernel
input_data: 0x0000000003e8c2c4
input_len: 0x0000000000d59ef7
output: 0x0000000001000000
output_len: 0x0000000003156b50
kernel_total_size: 0x0000000003c30000
needed_size: 0x0000000003e00000
trampoline_32bit: 0x0000000000000000
Physical KASLR using RDRAND RDTSC...
Virtual KASLR using RDRAND RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel (entry_offset: 0x0000000002b46b90).
[    0.000000] Linux version 6.18.0-rc1-g1c64efcb083c (v@laptop) (gcc (GCC) 15.2.1 20250813, GNU ld (GNU Binutils) 2.45.0) #1 SMP PREEMPT_DYNAMIC Mon Oct 20 14:25:28 CST 2025
[    0.000000] Command line: rootfstype=9p rootflags=trans=virtio,cache=mmap,msize=1048576 rw earlyprintk=serial,0,115200 printk.devkmsg=on console=0,115200 loglevel=7 raid=noautodetect init=/tmp/vmtest-init4rGXk.sh panic=-1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] printk: legacy bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2496.059 MHz processor
[    0.000120] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000464] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000955] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
Memory KASLR using RDRAND RDTSC...
[    0.001575] last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[    0.005888] found SMP MP-table at [mem 0x000f66a0-0x000f66af]
[    0.006229] Using GB pages for direct mapping
[    0.006714] ACPI: Early table checksum verification disabled
[    0.007044] ACPI: RSDP 0x00000000000F64B0 000014 (v00 BOCHS )
[    0.007385] ACPI: RSDT 0x00000000BFFE2379 000034 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007878] ACPI: FACP 0x00000000BFFE2225 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008374] ACPI: DSDT 0x00000000BFFE0040 0021E5 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008870] ACPI: FACS 0x00000000BFFE0000 000040
[    0.009138] ACPI: APIC 0x00000000BFFE2299 000080 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.009635] ACPI: HPET 0x00000000BFFE2319 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010124] ACPI: WAET 0x00000000BFFE2351 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010621] ACPI: Reserving FACP table memory at [mem 0xbffe2225-0xbffe2298]
[    0.011034] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe2224]
[    0.011448] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[    0.011859] ACPI: Reserving APIC table memory at [mem 0xbffe2299-0xbffe2318]
[    0.012272] ACPI: Reserving HPET table memory at [mem 0xbffe2319-0xbffe2350]
[    0.012688] ACPI: Reserving WAET table memory at [mem 0xbffe2351-0xbffe2378]
[    0.013239] No NUMA configuration found
[    0.013462] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.013852] NODE_DATA(0) allocated [mem 0x13fff9e80-0x13fffdfff]
[    0.014211] Zone ranges:
[    0.014358]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.014717]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.015075]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.015432] Movable zone start for each node
[    0.015680] Early memory node ranges
[    0.015888]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.016255]   node   0: [mem 0x0000000000100000-0x00000000bffdffff]
[    0.016618]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.016980] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.017487] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.017851] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.025771] On node 0, zone Normal: 32 pages in unavailable ranges
[    0.026352] ACPI: PM-Timer IO Port: 0x608
[    0.026593] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.026963] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.027364] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.027732] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.028124] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.028513] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.028926] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.029341] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.029756] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.030062] TSC deadline timer available
[    0.030296] CPU topo: Max. logical packages:   1
[    0.030567] CPU topo: Max. logical dies:       1
[    0.030842] CPU topo: Max. dies per package:   1
[    0.031110] CPU topo: Max. threads per core:   1
[    0.031377] CPU topo: Num. cores per package:     2
[    0.031668] CPU topo: Num. threads per package:   2
[    0.031967] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[    0.032326] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.032684] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.036862] setup_percpu: NR_CPUS:128 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.037628] percpu: Embedded 56 pages/cpu s191568 r8192 d29616 u1048576
[    0.038094] Kernel command line: rootfstype=9p rootflags=trans=virtio,cache=mmap,msize=1048576 rw earlyprintk=serial,0,115200 printk.devkmsg=on console=0,115200 loglevel=7 raid=noautodetect init=/tmp/vmtest-init4rGXk.sh panic=-1
[    0.039358] Unknown kernel command line parameters "raid=noautodetect", will be passed to user space.
[    0.039935] random: crng init done
[    0.040156] printk: log buffer data + meta data: 2097152 + 7340032 = 9437184 bytes
[    0.041048] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.041774] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.042326] software IO TLB: area num 2.
[    0.053663] Fallback order for Node 0: 0
[    0.053669] Built 1 zonelists, mobility grouping on.  Total pages: 1048446
[    0.054289] Policy zone: Normal
[    0.054468] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.060562] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Poking KASLR using RDRAND RDTSC...
[    0.067877] ftrace: allocating 41991 entries in 166 pages
[    0.068178] ftrace: allocated 166 pages with 4 groups
[    0.068525] Dynamic Preempt: full
[    0.068858] Running RCU self tests
[    0.069048] Running RCU synchronous self tests
[    0.069291] rcu: Preemptible hierarchical RCU implementation.
[    0.069603] rcu: 	RCU event tracing is enabled.
[    0.069853] rcu: 	RCU lockdep checking is enabled.
[    0.070116] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.070485] 	Trampoline variant of Tasks RCU enabled.
[    0.070762] 	Rude variant of Tasks RCU enabled.
[    0.071009] 	Tracing variant of Tasks RCU enabled.
[    0.071270] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.071689] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.072071] Running RCU synchronous self tests
[    0.072317] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    0.072809] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    0.073341] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    0.076900] NR_IRQS: 8448, nr_irqs: 440, preallocated irqs: 16
[    0.077427] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.077978] Console: colour *CGA 80x25
[    0.078225] printk: legacy console [ttyS0] enabled
[    0.078225] printk: legacy console [ttyS0] enabled
[    0.078830] printk: legacy bootconsole [earlyser0] disabled
[    0.078830] printk: legacy bootconsole [earlyser0] disabled
[    0.079510] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.079958] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.080196] ... MAX_LOCK_DEPTH:          48
[    0.080438] ... MAX_LOCKDEP_KEYS:        8192
[    0.080692] ... CLASSHASH_SIZE:          4096
[    0.080944] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.081200] ... MAX_LOCKDEP_CHAINS:      65536
[    0.081457] ... CHAINHASH_SIZE:          32768
[    0.081716]  memory used by lock dependency info: 6429 kB
[    0.082026]  memory used for stack traces: 4224 kB
[    0.082307]  per task-struct memory footprint: 1920 bytes
[    0.082638] ACPI: Core revision 20250807
[    0.082980] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.083583] APIC: Switch to symmetric I/O mode setup
[    0.084588] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.089594] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23faaecc2a6, max_idle_ns: 440795204781 ns
[    0.090195] Calibrating delay loop (skipped), value calculated using timer frequency.. 4992.11 BogoMIPS (lpj=2496059)
[    0.091300] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.091728] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.092186] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.092547] mitigations: Enabled attack vectors: user_kernel, user_user, SMT mitigations: auto
[    0.093067] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.093187] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.093543] ITS: Mitigation: Aligned branch/return thunks
[    0.094186] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.094692] Spectre V2 : WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!
[    0.095188] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.095647] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.096186] active return thunk: its_return_thunk
[    0.096478] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.097186] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.097537] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.097888] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[    0.098186] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[    0.098537] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[    0.098907] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.099186] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.099523] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
[    0.100186] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
[    0.100525] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[    0.100868] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
[    0.101185] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[    0.120114] Freeing SMP alternatives memory: 44K
[    0.120187] pid_max: default: 32768 minimum: 301
[    0.120492] LSM: initializing lsm=capability,selinux,bpf,ima
[    0.120836] SELinux:  Initializing.
[    0.121798] LSM support for eBPF active
[    0.122190] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.122619] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.123770] Running RCU synchronous self tests
[    0.124023] Running RCU synchronous self tests
[    0.124345] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-11850H @ 2.50GHz (family: 0x6, model: 0x8d, stepping: 0x1)
[    0.125184] Performance Events: Icelake events, full-width counters, Intel PMU driver.
[    0.125191] ... version:                   2
[    0.125427] ... bit width:                 48
[    0.125674] ... generic counters:          8
[    0.125910] ... generic bitmap:            00000000000000ff
[    0.126186] ... fixed-purpose counters:    3
[    0.126420] ... fixed-purpose bitmap:      0000000000000007
[    0.126738] ... value mask:                0000ffffffffffff
[    0.127042] ... max period:                00007fffffffffff
[    0.127186] ... global_ctrl mask:          00000007000000ff
[    0.127666] signal: max sigframe size: 3232
[    0.127959] rcu: Hierarchical SRCU implementation.
[    0.128187] rcu: 	Max phase no-delay instances is 400.
[    0.128540] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.131118] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.132258] smp: Bringing up secondary CPUs ...
[    0.132723] smpboot: x86: Booting SMP configuration:
[    0.133009] .... node  #0, CPUs:      #1
[    0.193374] smp: Brought up 1 node, 2 CPUs
[    0.193685] smpboot: Total of 2 processors activated (10057.18 BogoMIPS)
[    0.194352] Memory: 3983100K/4193784K available (16460K kernel code, 9137K rwdata, 10296K rodata, 3224K init, 13904K bss, 200612K reserved, 0K cma-reserved)
[    0.195698] devtmpfs: initialized
[    0.196704] Running RCU synchronous self tests
[    0.196704] Running RCU synchronous self tests
[    0.197228] Running RCU Tasks wait API self tests
[    0.197643] Running RCU Tasks Rude wait API self tests
[    0.197689] Running RCU Tasks Trace wait API self tests
[    0.211197] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.211211] posixtimers hash table entries: 1024 (order: 4, 73728 bytes, linear)
[    0.211849] futex hash table entries: 512 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[    0.214533] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.215662] audit: initializing netlink subsys (disabled)
[    0.216211] audit: type=2000 audit(1760950062.131:1): state=initialized audit_enabled=0 res=1
[    0.216380] thermal_sys: Registered thermal governor 'step_wise'
[    0.216949] cpuidle: using governor ladder
[    0.217457] cpuidle: using governor menu
[    0.217588] PCI: Using configuration type 1 for base access
[    0.218236] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.220428] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.220813] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.221179] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.221187] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.224129] ACPI: Added _OSI(Module Device)
[    0.224187] ACPI: Added _OSI(Processor Device)
[    0.224438] ACPI: Added _OSI(Processor Aggregator Device)
[    0.227764] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.231099] ACPI: Interpreter enabled
[    0.231215] ACPI: PM: (supports S0 S3 S5)
[    0.231195] Callback from call_rcu_tasks_trace() invoked.
[    0.231448] ACPI: Using IOAPIC for interrupt routing
[    0.232208] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.232784] PCI: Using E820 reservations for host bridge windows
[    0.235241] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.239680] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.240029] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    0.240188] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.240764] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[    0.241476] PCI host bridge to bus 0000:00
[    0.241709] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.242107] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.242187] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.242602] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.243031] pci_bus 0000:00: root bus resource [mem 0x7000000000-0x707fffffff window]
[    0.243187] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.243563] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[    0.244466] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[    0.245279] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[    0.246207] pci 0000:00:01.1: BAR 4 [io  0xc100-0xc10f]
[    0.246548] pci 0000:00:01.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    0.246923] pci 0000:00:01.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    0.247187] pci 0000:00:01.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    0.247574] pci 0000:00:01.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    0.248131] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    0.248353] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.248755] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.249441] pci 0000:00:02.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
[    0.250845] pci 0000:00:02.0: BAR 0 [io  0xc000-0xc03f]
[    0.251147] pci 0000:00:02.0: BAR 1 [mem 0xfebfc000-0xfebfcfff]
[    0.251201] pci 0000:00:02.0: BAR 4 [mem 0x7000000000-0x7000003fff 64bit pref]
[    0.252544] pci 0000:00:03.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
[    0.253673] pci 0000:00:03.0: BAR 0 [io  0xc040-0xc07f]
[    0.253992] pci 0000:00:03.0: BAR 1 [mem 0xfebfd000-0xfebfdfff]
[    0.254202] pci 0000:00:03.0: BAR 4 [mem 0x7000004000-0x7000007fff 64bit pref]
[    0.255506] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint
[    0.256732] pci 0000:00:04.0: BAR 0 [io  0xc080-0xc0bf]
[    0.257044] pci 0000:00:04.0: BAR 1 [mem 0xfebfe000-0xfebfefff]
[    0.257201] pci 0000:00:04.0: BAR 4 [mem 0x7000008000-0x700000bfff 64bit pref]
[    0.258686] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint
[    0.260010] pci 0000:00:05.0: BAR 0 [io  0xc0c0-0xc0ff]
[    0.260208] pci 0000:00:05.0: BAR 1 [mem 0xfebff000-0xfebfffff]
[    0.260576] pci 0000:00:05.0: BAR 4 [mem 0x700000c000-0x700000ffff 64bit pref]
[    0.262373] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.262811] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.263243] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.263659] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.264037] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[    0.264621] iommu: Default domain type: Translated
[    0.264682] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.265210] pps_core: LinuxPPS API ver. 1 registered
[    0.265649] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.267221] PTP clock support registered
[    0.268437] NetLabel: Initializing
[    0.268742] NetLabel:  domain hash size = 128
[    0.269180] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.269235] NetLabel:  unlabeled traffic allowed by default
[    0.269785] PCI: Using ACPI for IRQ routing
[    0.270437] vgaarb: loaded
[    0.270437] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.270807] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.276306] clocksource: Switched to clocksource tsc-early
[    0.277683] pnp: PnP ACPI init
[    0.278936] pnp: PnP ACPI: found 5 devices
[    0.287520] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.288102] NET: Registered PF_INET protocol family
[    0.288471] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.296027] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 147456 bytes, linear)
[    0.296726] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.297201] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.297729] TCP bind hash table entries: 32768 (order: 10, 4718592 bytes, vmalloc hugepage)
[    0.299043] TCP: Hash tables configured (established 32768 bind 32768)
[    0.299559] MPTCP token hash table entries: 4096 (order: 6, 360448 bytes, linear)
[    0.300049] UDP hash table entries: 2048 (order: 7, 524288 bytes, linear)
[    0.300483] UDP-Lite hash table entries: 2048 (order: 7, 524288 bytes, linear)
[    0.301126] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.301495] NET: Registered PF_XDP protocol family
[    0.301807] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.302154] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.302504] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.302914] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.303313] pci_bus 0000:00: resource 8 [mem 0x7000000000-0x707fffffff window]
[    0.303829] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.304164] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.304566] PCI: CLS 0 bytes, default 64
[    0.304904] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.305272] software IO TLB: mapped [mem 0x00000000bbfe0000-0x00000000bffe0000] (64MB)
[    0.305780] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.307386] Initialise system trusted keyrings
[    0.307740] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.308381] fuse: init (API version 7.45)
[    0.308712] 9p: Installing v9fs 9p2000 file system support
[    0.314985] NET: Registered PF_ALG protocol family
[    0.315288] Key type asymmetric registered
[    0.315547] Asymmetric key parser 'x509' registered
[    0.315872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.316401] io scheduler mq-deadline registered
[    0.316686] io scheduler kyber registered
[    0.317233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.317881] ACPI: button: Power Button [PWRF]
[    0.319310] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[    0.321055] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    0.322667] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[    0.324267] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[    0.344067] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.344706] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.372426] Linux agpgart interface v0.103
[    0.377776] brd: module loaded
[    0.381002] loop: module loaded
[    0.382411] tun: Universal TUN/TAP device driver, 1.6
[    0.382995] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.384016] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.384490] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.385423] Registered IR keymap rc-empty
[    0.385850] rc rc0: rc-core loopback device as /devices/virtual/rc/rc0
[    0.386424] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.387092] rc rc0: lirc_dev: driver rc-loopback registered at minor = 0, raw IR receiver, raw IR transmitter
[    0.388282] input: rc-core loopback device as /devices/virtual/rc/rc0/input2
[    0.389032] intel_powerclamp: CPU does not support MWAIT
[    0.389338] intel_pstate: CPU model not supported
[    0.390106] GACT probability NOT on
[    0.390336] Mirror/redirect action on
[    0.391220] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    0.391824] gre: GRE over IPv4 demultiplexer driver
[    0.392100] ip_gre: GRE over IPv4 tunneling driver
[    0.393067] Initializing XFRM netlink socket
[    0.393368] IPsec XFRM device driver
[    0.393626] NET: Registered PF_INET6 protocol family
[    0.394389] Segment Routing with IPv6
[    0.394625] In-situ OAM (IOAM) with IPv6
[    0.394894] mip6: Mobile IPv6
[    0.395097] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.395979] ip6_gre: GRE over IPv6 tunneling driver
[    0.396591] NET: Registered PF_PACKET protocol family
[    0.396987] 8021q: 802.1Q VLAN Support v1.8
[    0.397272] 9pnet: Installing 9P2000 support
[    0.398524] Key type dns_resolver registered
[    0.398892] NET: Registered PF_VSOCK protocol family
[    0.399211] mpls_gso: MPLS GSO support
[    0.399814] IPI shorthand broadcast: enabled
[    0.404788] sched_clock: Marking stable (396843605, 7342689)->(417147439, -12961145)
[    0.405330] Callback from call_rcu_tasks() invoked.
[    0.405886] registered taskstats version 1
[    0.411442] Loading compiled-in X.509 certificates
[    0.412579] Loaded X.509 cert 'Build time autogenerated kernel key: 3cee96964ddebecf1b0b1438932e28ffced7b530'
[    0.423380] Demotion targets for Node 0: null
[    0.423858] ima: No TPM chip found, activating TPM-bypass!
[    0.424201] ima: Allocated hash algorithm: sha1
[    0.424493] ima: No architecture policies found
[    0.428121] check access for rdinit=/init failed: -2, ignoring
[    0.797822] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    0.798449] 9pnet_virtio: no channels available for device
[    0.798707] 9pnet: Limiting 'msize' to 512000 as this is the maximum supported by transport virtio
[    0.800027] VFS: Mounted root (9p filesystem) on device 0:21.
[    0.800473] devtmpfs: mounted
[    0.805289] Freeing unused kernel image (initmem) memory: 3224K
[    0.805540] Write protecting the kernel read-only data: 30720k
[    0.806365] Freeing unused kernel image (text/rodata gap) memory: 1968K
[    0.807023] Freeing unused kernel image (rodata/data gap) memory: 1992K
[    0.807315] Run /tmp/vmtest-init4rGXk.sh as init process
[    0.896407] vmtest: Mounting tmpfs at /dev/shm
[    0.953225] vmtest: Mounting tmpfs at /run
[    0.986902] vmtest: Mounting sysfs at /sys
[    0.995474] vmtest: Mounting debugfs at /sys/kernel/debug
[    1.003835] vmtest: Mounting tracefs at /sys/kernel/debug/tracing
[    1.012284] vmtest: Mounting cgroup2 at /sys/fs/cgroup
[    1.029056] vmtest: Mounting tmpfs at /mnt
[    1.037306] vmtest: Symlink /dev/fd to /proc/self/fd
[    1.042734] vmtest: Init done
[    1.116319] vmtest: Located qemu-guest-agent virtio port: /dev/vport0p1
[    1.116842] vmtest: Spawning qemu-ga in the background
===> Setting up VM
[    1.332434] tsc: Refined TSC clocksource calibration: 2495.995 MHz
[    1.332945] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa72c04f7, max_idle_ns: 440795326923 ns
[    1.333540] clocksource: Switched to clocksource tsc
[    1.411775] 9pnet: Limiting 'msize' to 512000 as this is the maximum supported by transport virtio
tty: ttyname error: Inappropriate ioctl for device
===> Running command
execve("./test_progs", ["./test_progs", "-t", "arg_parsing"], 0x7ffdd5433710 /* 79 vars */) = 0
brk(NULL)                               = 0x55ee00a25000
access("/etc/ld.so.preload", R_OK)      = 0
openat(AT_FDCWD, "/etc/ld.so.preload", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=20, ...}) = 0
mmap(NULL, 20, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0x7f5646067000
close(3)                                = 0
readlinkat(AT_FDCWD, "/proc/self/exe", "/home/v/linux_work/bpf/tools/tes"..., 4096) = 61
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5646065000
openat(AT_FDCWD, "/lib/lib/liblsp.so", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\24\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=19000, ...}) = 0
mmap(NULL, 4211528, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_DENYWRITE, -1, 0) = 0x7f5645c60000
mmap(0x7f5645e00000, 2114376, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0) = 0x7f5645e00000
munmap(0x7f5645c60000, 1703936)         = 0
munmap(0x7f5646005000, 389960)          = 0
mprotect(0x7f5645e04000, 2093056, PROT_NONE) = 0
mmap(0x7f5646003000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f5646003000
close(3)                                = 0
munmap(0x7f5646067000, 20)              = 0
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=234755, ...}) = 0
mmap(NULL, 234755, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f564602b000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libelf.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=112728, ...}) = 0
mmap(NULL, 110616, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f564600f000
mmap(0x7f5646012000, 77824, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f5646012000
mmap(0x7f5646025000, 16384, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7f5646025000
mmap(0x7f5646029000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7f5646029000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libz.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=100368, ...}) = 0
mmap(NULL, 98320, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f5645de7000
mmap(0x7f5645dea000, 57344, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f5645dea000
mmap(0x7f5645df8000, 24576, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11000) = 0x7f5645df8000
mmap(0x7f5645dfe000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7f5645dfe000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libpcap.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=309600, ...}) = 0
mmap(NULL, 311712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f5645d9a000
mmap(0x7f5645d9e000, 172032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f5645d9e000
mmap(0x7f5645dc8000, 110592, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2e000) = 0x7f5645dc8000
mmap(0x7f5645de3000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x48000) = 0x7f5645de3000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libLLVM.so.20.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=157076696, ...}) = 0
mmap(NULL, 157875224, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563c70a000
mmap(0x7f563cc51000, 90820608, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x547000) = 0x7f563cc51000
mmap(0x7f56422ee000, 58408960, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5be4000) = 0x7f56422ee000
mmap(0x7f5645aa2000, 2318336, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9397000) = 0x7f5645aa2000
mmap(0x7f5645cd8000, 793624, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f5645cd8000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000x\2\0\0\0\0\0"..., 832) = 832
pread64(3, "\6\0\0\0\4\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 896, 64) = 896
fstat(3, {st_mode=S_IFREG|0755, st_size=2149728, ...}) = 0
pread64(3, "\6\0\0\0\4\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 896, 64) = 896
mmap(NULL, 2174000, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563c4f7000
mmap(0x7f563c51b000, 1515520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24000) = 0x7f563c51b000
mmap(0x7f563c68d000, 454656, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x196000) = 0x7f563c68d000
mmap(0x7f563c6fc000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x204000) = 0x7f563c6fc000
mmap(0x7f563c702000, 31792, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f563c702000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14352, ...}) = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f564600d000
mmap(NULL, 16400, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f5646008000
mmap(0x7f5646009000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x7f5646009000
mmap(0x7f564600a000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f564600a000
mmap(0x7f564600b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f564600b000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libzstd.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=935880, ...}) = 0
mmap(NULL, 933944, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563c412000
mmap(0x7f563c41e000, 811008, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc000) = 0x7f563c41e000
mmap(0x7f563c4e4000, 69632, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd2000) = 0x7f563c4e4000
mmap(0x7f563c4f5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe3000) = 0x7f563c4f5000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libnl-genl-3.so.200", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=27576, ...}) = 0
mmap(NULL, 25432, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563c40b000
mmap(0x7f563c40d000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f563c40d000
mmap(0x7f563c40f000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f563c40f000
mmap(0x7f563c410000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0x7f563c410000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libnl-3.so.200", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=133368, ...}) = 0
mmap(NULL, 131608, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563c3ea000
mmap(0x7f563c3f1000, 61440, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x7f563c3f1000
mmap(0x7f563c400000, 32768, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7f563c400000
mmap(0x7f563c408000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1e000) = 0x7f563c408000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libdbus-1.so.3", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=334008, ...}) = 0
mmap(NULL, 336624, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563c397000
mmap(0x7f563c3a5000, 200704, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) = 0x7f563c3a5000
mmap(0x7f563c3d6000, 69632, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3f000) = 0x7f563c3d6000
mmap(0x7f563c3e7000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4f000) = 0x7f563c3e7000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libffi.so.8", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=47336, ...}) = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5646006000
mmap(NULL, 46320, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563c38b000
mmap(0x7f563c38d000, 28672, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f563c38d000
mmap(0x7f563c394000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9000) = 0x7f563c394000
mmap(0x7f563c395000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa000) = 0x7f563c395000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libedit.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=223344, ...}) = 0
mmap(NULL, 236672, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563c351000
mmap(0x7f563c357000, 135168, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f563c357000
mmap(0x7f563c378000, 53248, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x27000) = 0x7f563c378000
mmap(0x7f563c385000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x34000) = 0x7f563c385000
mmap(0x7f563c388000, 11392, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f563c388000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libxml2.so.16", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1260488, ...}) = 0
mmap(NULL, 1262640, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563c21c000
mmap(0x7f563c236000, 864256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7f563c236000
mmap(0x7f563c309000, 249856, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xed000) = 0x7f563c309000
mmap(0x7f563c346000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12a000) = 0x7f563c346000
mmap(0x7f563c350000, 1072, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f563c350000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libstdc++.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=22480456, ...}) = 0
mmap(NULL, 2699336, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563bf88000
mmap(0x7f563c01f000, 1396736, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x97000) = 0x7f563c01f000
mmap(0x7f563c174000, 598016, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ec000) = 0x7f563c174000
mmap(0x7f563c206000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x27e000) = 0x7f563c206000
mmap(0x7f563c218000, 12360, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f563c218000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1100400, ...}) = 0
mmap(NULL, 1102152, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563be7a000
mmap(0x7f563be89000, 569344, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf000) = 0x7f563be89000
mmap(0x7f563bf14000, 466944, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9a000) = 0x7f563bf14000
mmap(0x7f563bf86000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10b000) = 0x7f563bf86000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=906056, ...}) = 0
mmap(NULL, 180712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563be4d000
mmap(0x7f563be51000, 143360, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f563be51000
mmap(0x7f563be74000, 16384, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x27000) = 0x7f563be74000
mmap(0x7f563be78000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2a000) = 0x7f563be78000
close(3)                                = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f563be4b000
openat(AT_FDCWD, "/usr/lib/libsystemd.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1201600, ...}) = 0
mmap(NULL, 1202568, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563bd25000
mmap(0x7f563bd3a000, 798720, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f563bd3a000
mmap(0x7f563bdfd000, 274432, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd8000) = 0x7f563bdfd000
mmap(0x7f563be40000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11b000) = 0x7f563be40000
mmap(0x7f563be4a000, 2440, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f563be4a000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libncursesw.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=453896, ...}) = 0
mmap(NULL, 453856, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563bcb6000
mmap(0x7f563bcc3000, 290816, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd000) = 0x7f563bcc3000
mmap(0x7f563bd0a000, 90112, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x54000) = 0x7f563bd0a000
mmap(0x7f563bd20000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6a000) = 0x7f563bd20000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libicuuc.so.76", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=2095152, ...}) = 0
mmap(NULL, 2102320, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563bab4000
mmap(0x7f563bafc000, 1142784, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x48000) = 0x7f563bafc000
mmap(0x7f563bc13000, 577536, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15f000) = 0x7f563bc13000
mmap(0x7f563bca0000, 81920, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ec000) = 0x7f563bca0000
mmap(0x7f563bcb4000, 5168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f563bcb4000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libcap.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@|\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=43064, ...}) = 0
mmap(NULL, 45128, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f563baa8000
mmap(0x7f563baab000, 20480, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f563baab000
mmap(0x7f563bab0000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0x7f563bab0000
mmap(0x7f563bab2000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9000) = 0x7f563bab2000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libicudata.so.76", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=31859544, ...}) = 0
mmap(NULL, 31862784, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f5639c45000
mmap(0x7f563baa7000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1e61000) = 0x7f563baa7000
close(3)                                = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5639c43000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5639c41000
mmap(NULL, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5639c3e000
arch_prctl(ARCH_SET_FS, 0x7f5639c3eb80) = 0
set_tid_address(0x7f5639c3ee50)         = 113
set_robust_list(0x7f5639c3ee60, 24)     = 0
rseq(0x7f5639c3e6a0, 0x20, 0, 0x53053053) = 0
mprotect(0x7f563c6fc000, 16384, PROT_READ) = 0
mprotect(0x7f563baa7000, 4096, PROT_READ) = 0
mprotect(0x7f563bab2000, 4096, PROT_READ) = 0
mprotect(0x7f563bf86000, 4096, PROT_READ) = 0
mprotect(0x7f563be78000, 4096, PROT_READ) = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5639c3c000
mprotect(0x7f563c206000, 69632, PROT_READ) = 0
mprotect(0x7f563bca0000, 77824, PROT_READ) = 0
mprotect(0x7f563bd20000, 16384, PROT_READ) = 0
mprotect(0x7f563be40000, 36864, PROT_READ) = 0
mprotect(0x7f5645dfe000, 4096, PROT_READ) = 0
mprotect(0x7f563c346000, 36864, PROT_READ) = 0
mprotect(0x7f563c385000, 8192, PROT_READ) = 0
mprotect(0x7f563c395000, 4096, PROT_READ) = 0
mprotect(0x7f563c3e7000, 8192, PROT_READ) = 0
mprotect(0x7f563c408000, 8192, PROT_READ) = 0
mprotect(0x7f563c410000, 4096, PROT_READ) = 0
mprotect(0x7f563c4f5000, 4096, PROT_READ) = 0
mprotect(0x7f564600b000, 4096, PROT_READ) = 0
mmap(NULL, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5639c39000
mmap(NULL, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5639c34000
mmap(NULL, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5639c2b000
mmap(NULL, 69632, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5639c1a000
mprotect(0x7f5645aa2000, 2023424, PROT_READ) = 0
mprotect(0x7f5645de3000, 12288, PROT_READ) = 0
mprotect(0x7f5646029000, 4096, PROT_READ) = 0
mprotect(0x7f5646003000, 4096, PROT_READ) = 0
mprotect(0x55edfc029000, 40960, PROT_READ) = 0
mprotect(0x7f56460a9000, 8192, PROT_READ) = 0
prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
getrandom("\xf1\x6f\x8a\xd2\x35\x03\x92\x94", 8, GRND_NONBLOCK) = 8
munmap(0x7f564602b000, 234755)          = 0
prctl(PR_CAPBSET_READ, CAP_MAC_OVERRIDE) = 1
prctl(PR_CAPBSET_READ, 0x30 /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, CAP_CHECKPOINT_RESTORE) = 1
prctl(PR_CAPBSET_READ, 0x2c /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, 0x2a /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, 0x29 /* CAP_??? */) = -1 EINVAL (Invalid argument)
futex(0x7f563c2186bc, FUTEX_WAKE_PRIVATE, 2147483647) = 0
brk(NULL)                               = 0x55ee00a25000
brk(0x55ee00a58000)                     = 0x55ee00a58000
lseek(2, 0, SEEK_CUR)                   = -1 ESPIPE (Illegal seek)
fstat(2, {st_mode=S_IFCHR|0600, st_rdev=makedev(0xf7, 0x1), ...}) = 0
brk(0x55ee00a79000)                     = 0x55ee00a79000
brk(0x55ee00a9a000)                     = 0x55ee00a9a000
openat(AT_FDCWD, "/etc/lsp.exclude", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sysname="Linux", nodename="(none)", ...}) = 0
shmget(0xa5723213, 16384, IPC_CREAT|IPC_EXCL|0666) = -1 EEXIST (File exists)
shmget(0xa5723213, 16384, 000)          = 0
shmat(0, NULL, SHM_RDONLY)              = 0x7f5646061000
rt_sigaction(SIGSEGV, {sa_handler=0x55edfb4b635a, sa_mask=[], sa_flags=SA_RESTORER|SA_RESETHAND, sa_restorer=0x7f563c535540}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {sa_handler=0x7f563c58b0b0, sa_mask=[], sa_flags=SA_RESTORER|SA_ONSTACK|SA_RESTART|SA_SIGINFO, sa_restorer=0x7f563c535540}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
mmap(NULL, 29888, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7f5646059000
madvise(0x7f5646059000, 4096, MADV_GUARD_INSTALL) = 0
rt_sigprocmask(SIG_BLOCK, ~[], [], 8)   = 0
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7f564605fe50, parent_tid=0x7f564605fe50, exit_signal=0, stack=0x7f5646059000, stack_size=0x6000, tls=0x7f564605fb80} => {parent_tid=[114]}, 88) = 114
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
futex(0x7f563c707164, FUTEX_WAKE_PRIVATE, 2147483647) = 0
timer_create(CLOCK_MONOTONIC, {sigev_value={sival_int=11041120, sival_ptr=0x55ee00a87960}, sigev_signo=SIGRTMIN, sigev_notify=SIGEV_THREAD_ID, sigev_notify_thread_id=114}, [0]) = 0
add_key("asymmetric", "libbpf_session_key", "0\202\00300\202\2\30\240\3\2\1\2\2\24]HD\257\377\227\344q\271\355:E\275\231\31_\343"..., 820, KEY_SPEC_SESSION_KEYRING) = 840456939
openat(AT_FDCWD, "/proc/sys/net/core/bpf_jit_enable", O_RDONLY) = 3
read(3, "1", 1)                         = 1
close(3)                                = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/possible", O_RDONLY|O_CLOEXEC) = 3
read(3, "0-1\n", 128)                   = 4
close(3)                                = 0
membarrier(MEMBARRIER_CMD_GLOBAL, 0)    = 0
delete_module("bpf_testmod", 0)         = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "bpf_testmod.ko", O_RDONLY) = 3
^[]3008;start=66cc2fa9-27d0-44b4-885c-ab497965f68c;user=;hostname=(none);machineid=1cdaf5cebfab41c8bca955e04060bc11;bootid=d21d93e5-f04d-4191-adc0-e69d392a1b19;pid=83;type=shell;cwd=/^[\^[[?2004h[root@(none) /]# [    1.923467] bpf_testmod: loading out-of-tree module taints kernel.
[    1.923753] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
finit_module(3, "", 0)                  = 0
close(3)                                = 0
openat(AT_FDCWD, "/proc/self/ns/net", O_RDONLY) = 3
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=10, tv_nsec=0}}, NULL) = 0
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=10, tv_nsec=0}}, NULL) = 0
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=10, tv_nsec=0}}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, ~[], [], 8)   = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_DROPPABLE|MAP_ANONYMOUS, -1, 0) = 0x7f5646067000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f5646058000
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
getrandom("\x71\x5a\x8a\xba\x3b\xbc\xd6\x0f\x14\x6c\x9b\xeb\x1f\xdd\xd0\xd6\x02\x72\x53\x24\x0a\x29\xbb\x69\x8f\x58\xaf\xd0\x2e\xe5\x00\xbb", 32, 0) = 32
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.WavYEa", O_RDWR|O_CREAT|O_EXCL, 0600) = 4
fcntl(4, F_GETFL)                       = 0x8002 (flags O_RDWR|O_LARGEFILE)
fstat(4, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
write(4, "# comment\n  test_with_spaces    "..., 175) = 175
close(4)                                = 0
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.WavYEa", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0600, st_size=175, ...}) = 0
read(4, "# comment\n  test_with_spaces    "..., 8192) = 175
read(4, "", 8192)                       = 0
close(4)                                = 0
unlink("/tmp/bpf_arg_parsing_test.WavYEa") = 0
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=0, tv_nsec=0}}, NULL) = 0
sched_setaffinity(0, 128, [0 1])        = 0
sched_setaffinity(113, 128, [0 1])      = 0
setns(3, CLONE_NEWNET)                  = 0
fstat(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0xf7, 0x1), ...}) = 0
ioctl(1, TCGETS2, 0x7fffb86c3830)       = -1 ENOTTY (Inappropriate ioctl for device)
close(3)                                = 0
membarrier(MEMBARRIER_CMD_GLOBAL, 0)    = 0
delete_module("bpf_testmod", 0)         = 0
shmdt(0x7f5646061000)                   = 0
write(1, "#7/1     arg_parsing/test_parse_"..., 160#7/1     arg_parsing/test_parse_test_list:OK
#7/2     arg_parsing/test_parse_test_list_file:OK
#7       arg_parsing:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
) = 160
exit_group(0)                           = ?
+++ exited with 0 +++

Diff before the fix:

diff --git a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
index e27d66b75fb1..fbf0d9c2f58b 100644
--- a/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
+++ b/tools/testing/selftests/bpf/prog_tests/arg_parsing.c
@@ -144,9 +144,6 @@ static void test_parse_test_list_file(void)
 	if (!ASSERT_OK(ferror(fp), "prepare tmp"))
 		goto out_fclose;
 
-	if (!ASSERT_OK(fsync(fileno(fp)), "fsync tmp"))
-		goto out_fclose;
-
 	init_test_filter_set(&set);
 
 	if (!ASSERT_OK(parse_test_list_file(tmpfile, &set, true), "parse file"))

Test before the fix:


=> bzImage
===> Booting
No EFI environment detected.
early console in extract_kernel
input_data: 0x0000000003e8c2c4
input_len: 0x0000000000d59ef7
output: 0x0000000001000000
output_len: 0x0000000003156b50
kernel_total_size: 0x0000000003c30000
needed_size: 0x0000000003e00000
trampoline_32bit: 0x0000000000000000
Physical KASLR using RDRAND RDTSC...
Virtual KASLR using RDRAND RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel (entry_offset: 0x0000000002b46b90).
[    0.000000] Linux version 6.18.0-rc1-g1c64efcb083c (v@laptop) (gcc (GCC) 15.2.1 20250813, GNU ld (GNU Binutils) 2.45.0) #1 SMP PREEMPT_DYNAMIC Mon Oct 20 14:25:28 CST 2025
[    0.000000] Command line: rootfstype=9p rootflags=trans=virtio,cache=mmap,msize=1048576 rw earlyprintk=serial,0,115200 printk.devkmsg=on console=0,115200 loglevel=7 raid=noautodetect init=/tmp/vmtest-initPXYuB.sh panic=-1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] printk: legacy bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2495.840 MHz processor
[    0.000123] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000481] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000978] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
Memory KASLR using RDRAND RDTSC...
[    0.001612] last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[    0.006021] found SMP MP-table at [mem 0x000f66a0-0x000f66af]
[    0.006369] Using GB pages for direct mapping
[    0.006717] ACPI: Early table checksum verification disabled
[    0.007056] ACPI: RSDP 0x00000000000F64B0 000014 (v00 BOCHS )
[    0.007405] ACPI: RSDT 0x00000000BFFE2379 000034 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007909] ACPI: FACP 0x00000000BFFE2225 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008451] ACPI: DSDT 0x00000000BFFE0040 0021E5 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008954] ACPI: FACS 0x00000000BFFE0000 000040
[    0.009232] ACPI: APIC 0x00000000BFFE2299 000080 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.009740] ACPI: HPET 0x00000000BFFE2319 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010250] ACPI: WAET 0x00000000BFFE2351 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010765] ACPI: Reserving FACP table memory at [mem 0xbffe2225-0xbffe2298]
[    0.011185] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe2224]
[    0.011621] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[    0.012039] ACPI: Reserving APIC table memory at [mem 0xbffe2299-0xbffe2318]
[    0.012477] ACPI: Reserving HPET table memory at [mem 0xbffe2319-0xbffe2350]
[    0.012909] ACPI: Reserving WAET table memory at [mem 0xbffe2351-0xbffe2378]
[    0.013531] No NUMA configuration found
[    0.013762] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.014164] NODE_DATA(0) allocated [mem 0x13fffbe80-0x13fffffff]
[    0.014643] Zone ranges:
[    0.014801]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.015163]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.015529]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.015890] Movable zone start for each node
[    0.016139] Early memory node ranges
[    0.016401]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.016872]   node   0: [mem 0x0000000000100000-0x00000000bffdffff]
[    0.017374]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.017846] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.018483] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.018956] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.027324] On node 0, zone Normal: 32 pages in unavailable ranges
[    0.028090] ACPI: PM-Timer IO Port: 0x608
[    0.028459] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.028944] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.029486] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.029962] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.030464] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.030959] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.031472] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.031984] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.032471] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.032859] TSC deadline timer available
[    0.033157] CPU topo: Max. logical packages:   1
[    0.033507] CPU topo: Max. logical dies:       1
[    0.033862] CPU topo: Max. dies per package:   1
[    0.034222] CPU topo: Max. threads per core:   1
[    0.034578] CPU topo: Num. cores per package:     2
[    0.034943] CPU topo: Num. threads per package:   2
[    0.035305] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[    0.035678] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.036042] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.040511] setup_percpu: NR_CPUS:128 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.041191] percpu: Embedded 56 pages/cpu s191568 r8192 d29616 u1048576
[    0.041625] Kernel command line: rootfstype=9p rootflags=trans=virtio,cache=mmap,msize=1048576 rw earlyprintk=serial,0,115200 printk.devkmsg=on console=0,115200 loglevel=7 raid=noautodetect init=/tmp/vmtest-initPXYuB.sh panic=-1
[    0.042899] Unknown kernel command line parameters "raid=noautodetect", will be passed to user space.
[    0.043556] random: crng init done
[    0.043784] printk: log buffer data + meta data: 2097152 + 7340032 = 9437184 bytes
[    0.044670] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.045377] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.045912] software IO TLB: area num 2.
[    0.058274] Fallback order for Node 0: 0
[    0.058279] Built 1 zonelists, mobility grouping on.  Total pages: 1048446
[    0.059101] Policy zone: Normal
[    0.059386] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.065932] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Poking KASLR using RDRAND RDTSC...
[    0.073724] ftrace: allocating 41991 entries in 166 pages
[    0.074211] ftrace: allocated 166 pages with 4 groups
[    0.074651] Dynamic Preempt: full
[    0.075106] Running RCU self tests
[    0.075321] Running RCU synchronous self tests
[    0.075575] rcu: Preemptible hierarchical RCU implementation.
[    0.075902] rcu: 	RCU event tracing is enabled.
[    0.076160] rcu: 	RCU lockdep checking is enabled.
[    0.076438] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.076819] 	Trampoline variant of Tasks RCU enabled.
[    0.077105] 	Rude variant of Tasks RCU enabled.
[    0.077366] 	Tracing variant of Tasks RCU enabled.
[    0.077639] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.078080] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.078487] Running RCU synchronous self tests
[    0.078736] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    0.079224] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    0.079748] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[    0.083372] NR_IRQS: 8448, nr_irqs: 440, preallocated irqs: 16
[    0.084029] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.084606] Console: colour *CGA 80x25
[    0.084852] printk: legacy console [ttyS0] enabled
[    0.084852] printk: legacy console [ttyS0] enabled
[    0.085406] printk: legacy bootconsole [earlyser0] disabled
[    0.085406] printk: legacy bootconsole [earlyser0] disabled
[    0.086049] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.086497] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.086736] ... MAX_LOCK_DEPTH:          48
[    0.086980] ... MAX_LOCKDEP_KEYS:        8192
[    0.087238] ... CLASSHASH_SIZE:          4096
[    0.087493] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.087753] ... MAX_LOCKDEP_CHAINS:      65536
[    0.088013] ... CHAINHASH_SIZE:          32768
[    0.088276]  memory used by lock dependency info: 6429 kB
[    0.088591]  memory used for stack traces: 4224 kB
[    0.088904]  per task-struct memory footprint: 1920 bytes
[    0.089293] ACPI: Core revision 20250807
[    0.089648] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.090343] APIC: Switch to symmetric I/O mode setup
[    0.091375] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.096339] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f9e01fe9a, max_idle_ns: 440795324260 ns
[    0.096950] Calibrating delay loop (skipped), value calculated using timer frequency.. 4991.68 BogoMIPS (lpj=2495840)
[    0.098057] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.098493] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.098941] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.099288] mitigations: Enabled attack vectors: user_kernel, user_user, SMT mitigations: auto
[    0.099781] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.099941] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.100271] ITS: Mitigation: Aligned branch/return thunks
[    0.100941] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.101425] Spectre V2 : WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!
[    0.101943] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.102326] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.102941] active return thunk: its_return_thunk
[    0.103204] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.103610] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.103941] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.104274] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[    0.104664] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[    0.104941] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[    0.105300] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.105727] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.105941] x86/fpu: xstate_offset[5]:  832, xstate_sizes[5]:   64
[    0.106271] x86/fpu: xstate_offset[6]:  896, xstate_sizes[6]:  512
[    0.106609] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[    0.106941] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]:    8
[    0.107271] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[    0.125819] Freeing SMP alternatives memory: 44K
[    0.125942] pid_max: default: 32768 minimum: 301
[    0.126233] LSM: initializing lsm=capability,selinux,bpf,ima
[    0.126566] SELinux:  Initializing.
[    0.127499] LSM support for eBPF active
[    0.127852] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.127947] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.129199] Running RCU synchronous self tests
[    0.129437] Running RCU synchronous self tests
[    0.129813] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-11850H @ 2.50GHz (family: 0x6, model: 0x8d, stepping: 0x1)
[    0.129940] Performance Events: Icelake events, full-width counters, Intel PMU driver.
[    0.129948] ... version:                   2
[    0.130174] ... bit width:                 48
[    0.130405] ... generic counters:          8
[    0.130630] ... generic bitmap:            00000000000000ff
[    0.130926] ... fixed-purpose counters:    3
[    0.130942] ... fixed-purpose bitmap:      0000000000000007
[    0.131234] ... value mask:                0000ffffffffffff
[    0.131528] ... max period:                00007fffffffffff
[    0.131825] ... global_ctrl mask:          00000007000000ff
[    0.132078] signal: max sigframe size: 3232
[    0.132355] rcu: Hierarchical SRCU implementation.
[    0.132614] rcu: 	Max phase no-delay instances is 400.
[    0.132958] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.135433] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.136956] smp: Bringing up secondary CPUs ...
[    0.137402] smpboot: x86: Booting SMP configuration:
[    0.137674] .... node  #0, CPUs:      #1
[    0.198236] smp: Brought up 1 node, 2 CPUs
[    0.198439] smpboot: Total of 2 processors activated (10056.34 BogoMIPS)
[    0.199193] Memory: 3984340K/4193784K available (16460K kernel code, 9137K rwdata, 10296K rodata, 3224K init, 13904K bss, 200604K reserved, 0K cma-reserved)
[    0.200560] devtmpfs: initialized
[    0.201562] Running RCU synchronous self tests
[    0.201955] Running RCU synchronous self tests
[    0.202234] Running RCU Tasks wait API self tests
[    0.202234] Running RCU Tasks Rude wait API self tests
[    0.202235] Running RCU Tasks Trace wait API self tests
[    0.215962] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.215962] posixtimers hash table entries: 1024 (order: 4, 73728 bytes, linear)
[    0.216379] futex hash table entries: 512 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[    0.217883] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.218310] audit: initializing netlink subsys (disabled)
[    0.218966] audit: type=2000 audit(1760950214.127:1): state=initialized audit_enabled=0 res=1
[    0.219129] thermal_sys: Registered thermal governor 'step_wise'
[    0.219963] cpuidle: using governor ladder
[    0.220555] cpuidle: using governor menu
[    0.221062] PCI: Using configuration type 1 for base access
[    0.221439] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.222098] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.222476] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.222944] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.223309] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.224668] ACPI: Added _OSI(Module Device)
[    0.224930] ACPI: Added _OSI(Processor Device)
[    0.224943] ACPI: Added _OSI(Processor Aggregator Device)
[    0.226237] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.231186] ACPI: Interpreter enabled
[    0.231470] ACPI: PM: (supports S0 S3 S5)
[    0.231726] ACPI: Using IOAPIC for interrupt routing
[    0.231964] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.232474] PCI: Using E820 reservations for host bridge windows
[    0.234962] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.235956] Callback from call_rcu_tasks_trace() invoked.
[    0.239412] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.239847] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    0.239943] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.240494] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[    0.241264] PCI host bridge to bus 0000:00
[    0.241491] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.241857] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.241943] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.242347] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.242790] pci_bus 0000:00: root bus resource [mem 0x7000000000-0x707fffffff window]
[    0.242942] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.243296] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[    0.244225] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[    0.245035] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[    0.245919] pci 0000:00:01.1: BAR 4 [io  0xc100-0xc10f]
[    0.245959] pci 0000:00:01.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    0.246335] pci 0000:00:01.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    0.246670] pci 0000:00:01.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    0.246942] pci 0000:00:01.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    0.247480] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    0.248145] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.248538] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.249187] pci 0000:00:02.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
[    0.250518] pci 0000:00:02.0: BAR 0 [io  0xc000-0xc03f]
[    0.250837] pci 0000:00:02.0: BAR 1 [mem 0xfebfc000-0xfebfcfff]
[    0.250958] pci 0000:00:02.0: BAR 4 [mem 0x7000000000-0x7000003fff 64bit pref]
[    0.252337] pci 0000:00:03.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint
[    0.253674] pci 0000:00:03.0: BAR 0 [io  0xc040-0xc07f]
[    0.253948] pci 0000:00:03.0: BAR 1 [mem 0xfebfd000-0xfebfdfff]
[    0.254314] pci 0000:00:03.0: BAR 4 [mem 0x7000004000-0x7000007fff 64bit pref]
[    0.255855] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint
[    0.256598] pci 0000:00:04.0: BAR 0 [io  0xc080-0xc0bf]
[    0.256908] pci 0000:00:04.0: BAR 1 [mem 0xfebfe000-0xfebfefff]
[    0.256956] pci 0000:00:04.0: BAR 4 [mem 0x7000008000-0x700000bfff 64bit pref]
[    0.258212] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint
[    0.259261] pci 0000:00:05.0: BAR 0 [io  0xc0c0-0xc0ff]
[    0.259556] pci 0000:00:05.0: BAR 1 [mem 0xfebff000-0xfebfffff]
[    0.259892] pci 0000:00:05.0: BAR 4 [mem 0x700000c000-0x700000ffff 64bit pref]
[    0.261307] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.261738] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.262022] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.262453] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.262830] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[    0.263330] iommu: Default domain type: Translated
[    0.263330] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.264147] pps_core: LinuxPPS API ver. 1 registered
[    0.264422] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.264949] PTP clock support registered
[    0.265631] NetLabel: Initializing
[    0.265856] NetLabel:  domain hash size = 128
[    0.265943] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.266265] NetLabel:  unlabeled traffic allowed by default
[    0.266581] PCI: Using ACPI for IRQ routing
[    0.267013] vgaarb: loaded
[    0.267128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.267399] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.270943] clocksource: Switched to clocksource tsc-early
[    0.271758] pnp: PnP ACPI init
[    0.272379] pnp: PnP ACPI: found 5 devices
[    0.280697] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.281225] NET: Registered PF_INET protocol family
[    0.281706] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.288406] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 147456 bytes, linear)
[    0.289035] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.289553] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.290058] TCP bind hash table entries: 32768 (order: 10, 4718592 bytes, vmalloc hugepage)
[    0.291276] TCP: Hash tables configured (established 32768 bind 32768)
[    0.291739] MPTCP token hash table entries: 4096 (order: 6, 360448 bytes, linear)
[    0.292180] UDP hash table entries: 2048 (order: 7, 524288 bytes, linear)
[    0.292603] UDP-Lite hash table entries: 2048 (order: 7, 524288 bytes, linear)
[    0.293177] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.293515] NET: Registered PF_XDP protocol family
[    0.293819] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.294183] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.294533] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.294926] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    0.295301] pci_bus 0000:00: resource 8 [mem 0x7000000000-0x707fffffff window]
[    0.295778] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.296106] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.296478] PCI: CLS 0 bytes, default 64
[    0.296749] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.297108] software IO TLB: mapped [mem 0x00000000bbfe0000-0x00000000bffe0000] (64MB)
[    0.297576] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.299122] Initialise system trusted keyrings
[    0.299483] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.300132] fuse: init (API version 7.45)
[    0.300463] 9p: Installing v9fs 9p2000 file system support
[    0.306872] NET: Registered PF_ALG protocol family
[    0.307155] Key type asymmetric registered
[    0.307387] Asymmetric key parser 'x509' registered
[    0.307706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.308317] io scheduler mq-deadline registered
[    0.308613] io scheduler kyber registered
[    0.309143] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.313098] ACPI: button: Power Button [PWRF]
[    0.314540] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[    0.316280] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    0.317975] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[    0.319706] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[    0.340304] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.341063] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.371195] Linux agpgart interface v0.103
[    0.376513] brd: module loaded
[    0.379773] loop: module loaded
[    0.381245] tun: Universal TUN/TAP device driver, 1.6
[    0.381717] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.382670] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.382980] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.383913] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.384481] Registered IR keymap rc-empty
[    0.384815] rc rc0: rc-core loopback device as /devices/virtual/rc/rc0
[    0.385347] rc rc0: lirc_dev: driver rc-loopback registered at minor = 0, raw IR receiver, raw IR transmitter
[    0.386174] input: rc-core loopback device as /devices/virtual/rc/rc0/input2
[    0.386722] intel_powerclamp: CPU does not support MWAIT
[    0.387033] intel_pstate: CPU model not supported
[    0.387795] GACT probability NOT on
[    0.388018] Mirror/redirect action on
[    0.388761] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    0.389322] gre: GRE over IPv4 demultiplexer driver
[    0.389617] ip_gre: GRE over IPv4 tunneling driver
[    0.390567] Initializing XFRM netlink socket
[    0.390843] IPsec XFRM device driver
[    0.391085] NET: Registered PF_INET6 protocol family
[    0.391803] Segment Routing with IPv6
[    0.392032] In-situ OAM (IOAM) with IPv6
[    0.392269] mip6: Mobile IPv6
[    0.392450] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.393263] ip6_gre: GRE over IPv6 tunneling driver
[    0.393764] NET: Registered PF_PACKET protocol family
[    0.394097] 8021q: 802.1Q VLAN Support v1.8
[    0.394360] 9pnet: Installing 9P2000 support
[    0.395521] Key type dns_resolver registered
[    0.395852] NET: Registered PF_VSOCK protocol family
[    0.396152] mpls_gso: MPLS GSO support
[    0.396697] IPI shorthand broadcast: enabled
[    0.401713] sched_clock: Marking stable (393468915, 7474116)->(415695301, -14752270)
[    0.402368] registered taskstats version 1
[    0.408127] Loading compiled-in X.509 certificates
[    0.409108] Loaded X.509 cert 'Build time autogenerated kernel key: 3cee96964ddebecf1b0b1438932e28ffced7b530'
[    0.413010] Callback from call_rcu_tasks() invoked.
[    0.419606] Demotion targets for Node 0: null
[    0.420057] ima: No TPM chip found, activating TPM-bypass!
[    0.420369] ima: Allocated hash algorithm: sha1
[    0.420640] ima: No architecture policies found
[    0.423906] check access for rdinit=/init failed: -2, ignoring
[    0.796507] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    0.797164] 9pnet_virtio: no channels available for device
[    0.797400] 9pnet: Limiting 'msize' to 512000 as this is the maximum supported by transport virtio
[    0.798480] VFS: Mounted root (9p filesystem) on device 0:21.
[    0.798885] devtmpfs: mounted
[    0.803718] Freeing unused kernel image (initmem) memory: 3224K
[    0.803974] Write protecting the kernel read-only data: 30720k
[    0.804807] Freeing unused kernel image (text/rodata gap) memory: 1968K
[    0.805443] Freeing unused kernel image (rodata/data gap) memory: 1992K
[    0.805719] Run /tmp/vmtest-initPXYuB.sh as init process
[    0.896179] vmtest: Mounting tmpfs at /dev/shm
[    0.949984] vmtest: Mounting tmpfs at /run
[    0.986155] vmtest: Mounting sysfs at /sys
[    0.996666] vmtest: Mounting debugfs at /sys/kernel/debug
[    1.006740] vmtest: Mounting tracefs at /sys/kernel/debug/tracing
[    1.015531] vmtest: Mounting cgroup2 at /sys/fs/cgroup
[    1.031896] vmtest: Mounting tmpfs at /mnt
[    1.041723] vmtest: Symlink /dev/fd to /proc/self/fd
[    1.048255] vmtest: Init done
[    1.129998] vmtest: Located qemu-guest-agent virtio port: /dev/vport0p1
[    1.130527] vmtest: Spawning qemu-ga in the background
===> Setting up VM
[    1.340553] tsc: Refined TSC clocksource calibration: 2495.994 MHz
[    1.340869] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa717cb36, max_idle_ns: 440795237972 ns
[    1.341320] clocksource: Switched to clocksource tsc
[    1.429921] 9pnet: Limiting 'msize' to 512000 as this is the maximum supported by transport virtio
tty: ttyname error: Inappropriate ioctl for device
===> Running command
execve("./test_progs", ["./test_progs", "-t", "arg_parsing"], 0x7ffc2f0e97b0 /* 79 vars */) = 0
brk(NULL)                               = 0x5645b48fe000
access("/etc/ld.so.preload", R_OK)      = 0
openat(AT_FDCWD, "/etc/ld.so.preload", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=20, ...}) = 0
mmap(NULL, 20, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0x7fec414d0000
close(3)                                = 0
readlinkat(AT_FDCWD, "/proc/self/exe", "/home/v/linux_work/bpf/tools/tes"..., 4096) = 61
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec414ce000
openat(AT_FDCWD, "/lib/lib/liblsp.so", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\24\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=19000, ...}) = 0
mmap(NULL, 4211528, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_DENYWRITE, -1, 0) = 0x7fec410c9000
mmap(0x7fec41200000, 2114376, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0) = 0x7fec41200000
munmap(0x7fec410c9000, 1273856)         = 0
munmap(0x7fec41405000, 820040)          = 0
mprotect(0x7fec41204000, 2093056, PROT_NONE) = 0
mmap(0x7fec41403000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7fec41403000
close(3)                                = 0
munmap(0x7fec414d0000, 20)              = 0
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=234755, ...}) = 0
mmap(NULL, 234755, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fec41494000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libelf.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=112728, ...}) = 0
mmap(NULL, 110616, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec41478000
mmap(0x7fec4147b000, 77824, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7fec4147b000
mmap(0x7fec4148e000, 16384, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7fec4148e000
mmap(0x7fec41492000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7fec41492000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libz.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=100368, ...}) = 0
mmap(NULL, 98320, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec4145f000
mmap(0x7fec41462000, 57344, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7fec41462000
mmap(0x7fec41470000, 24576, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11000) = 0x7fec41470000
mmap(0x7fec41476000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7fec41476000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libpcap.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=309600, ...}) = 0
mmap(NULL, 311712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec41412000
mmap(0x7fec41416000, 172032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7fec41416000
mmap(0x7fec41440000, 110592, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2e000) = 0x7fec41440000
mmap(0x7fec4145b000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x48000) = 0x7fec4145b000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libLLVM.so.20.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=157076696, ...}) = 0
mmap(NULL, 157875224, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec37b70000
mmap(0x7fec380b7000, 90820608, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x547000) = 0x7fec380b7000
mmap(0x7fec3d754000, 58408960, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5be4000) = 0x7fec3d754000
mmap(0x7fec40f08000, 2318336, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9397000) = 0x7fec40f08000
mmap(0x7fec4113e000, 793624, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fec4113e000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000x\2\0\0\0\0\0"..., 832) = 832
pread64(3, "\6\0\0\0\4\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 896, 64) = 896
fstat(3, {st_mode=S_IFREG|0755, st_size=2149728, ...}) = 0
pread64(3, "\6\0\0\0\4\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 896, 64) = 896
mmap(NULL, 2174000, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec3795d000
mmap(0x7fec37981000, 1515520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24000) = 0x7fec37981000
mmap(0x7fec37af3000, 454656, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x196000) = 0x7fec37af3000
mmap(0x7fec37b62000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x204000) = 0x7fec37b62000
mmap(0x7fec37b68000, 31792, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fec37b68000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14352, ...}) = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec41410000
mmap(NULL, 16400, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec4140b000
mmap(0x7fec4140c000, 4096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x7fec4140c000
mmap(0x7fec4140d000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fec4140d000
mmap(0x7fec4140e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fec4140e000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libzstd.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=935880, ...}) = 0
mmap(NULL, 933944, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec37878000
mmap(0x7fec37884000, 811008, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc000) = 0x7fec37884000
mmap(0x7fec3794a000, 69632, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd2000) = 0x7fec3794a000
mmap(0x7fec3795b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe3000) = 0x7fec3795b000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libnl-genl-3.so.200", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=27576, ...}) = 0
mmap(NULL, 25432, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec37871000
mmap(0x7fec37873000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fec37873000
mmap(0x7fec37875000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7fec37875000
mmap(0x7fec37876000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5000) = 0x7fec37876000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libnl-3.so.200", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=133368, ...}) = 0
mmap(NULL, 131608, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec37850000
mmap(0x7fec37857000, 61440, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x7fec37857000
mmap(0x7fec37866000, 32768, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7fec37866000
mmap(0x7fec3786e000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1e000) = 0x7fec3786e000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libdbus-1.so.3", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=334008, ...}) = 0
mmap(NULL, 336624, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec377fd000
mmap(0x7fec3780b000, 200704, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) = 0x7fec3780b000
mmap(0x7fec3783c000, 69632, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3f000) = 0x7fec3783c000
mmap(0x7fec3784d000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4f000) = 0x7fec3784d000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libffi.so.8", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=47336, ...}) = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec41409000
mmap(NULL, 46320, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec377f1000
mmap(0x7fec377f3000, 28672, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7fec377f3000
mmap(0x7fec377fa000, 4096, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9000) = 0x7fec377fa000
mmap(0x7fec377fb000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa000) = 0x7fec377fb000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libedit.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=223344, ...}) = 0
mmap(NULL, 236672, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec377b7000
mmap(0x7fec377bd000, 135168, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7fec377bd000
mmap(0x7fec377de000, 53248, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x27000) = 0x7fec377de000
mmap(0x7fec377eb000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x34000) = 0x7fec377eb000
mmap(0x7fec377ee000, 11392, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fec377ee000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libxml2.so.16", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1260488, ...}) = 0
mmap(NULL, 1262640, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec37682000
mmap(0x7fec3769c000, 864256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a000) = 0x7fec3769c000
mmap(0x7fec3776f000, 249856, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xed000) = 0x7fec3776f000
mmap(0x7fec377ac000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12a000) = 0x7fec377ac000
mmap(0x7fec377b6000, 1072, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fec377b6000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libstdc++.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=22480456, ...}) = 0
mmap(NULL, 2699336, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec373ee000
mmap(0x7fec37485000, 1396736, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x97000) = 0x7fec37485000
mmap(0x7fec375da000, 598016, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ec000) = 0x7fec375da000
mmap(0x7fec3766c000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x27e000) = 0x7fec3766c000
mmap(0x7fec3767e000, 12360, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fec3767e000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1100400, ...}) = 0
mmap(NULL, 1102152, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec372e0000
mmap(0x7fec372ef000, 569344, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf000) = 0x7fec372ef000
mmap(0x7fec3737a000, 466944, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9a000) = 0x7fec3737a000
mmap(0x7fec373ec000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10b000) = 0x7fec373ec000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=906056, ...}) = 0
mmap(NULL, 180712, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec372b3000
mmap(0x7fec372b7000, 143360, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7fec372b7000
mmap(0x7fec372da000, 16384, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x27000) = 0x7fec372da000
mmap(0x7fec372de000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2a000) = 0x7fec372de000
close(3)                                = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec41407000
openat(AT_FDCWD, "/usr/lib/libsystemd.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1201600, ...}) = 0
mmap(NULL, 1202568, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec3718d000
mmap(0x7fec371a2000, 798720, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7fec371a2000
mmap(0x7fec37265000, 274432, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd8000) = 0x7fec37265000
mmap(0x7fec372a8000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11b000) = 0x7fec372a8000
mmap(0x7fec372b2000, 2440, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fec372b2000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libncursesw.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=453896, ...}) = 0
mmap(NULL, 453856, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec3711e000
mmap(0x7fec3712b000, 290816, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd000) = 0x7fec3712b000
mmap(0x7fec37172000, 90112, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x54000) = 0x7fec37172000
mmap(0x7fec37188000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6a000) = 0x7fec37188000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libicuuc.so.76", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=2095152, ...}) = 0
mmap(NULL, 2102320, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec36f1c000
mmap(0x7fec36f64000, 1142784, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x48000) = 0x7fec36f64000
mmap(0x7fec3707b000, 577536, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15f000) = 0x7fec3707b000
mmap(0x7fec37108000, 81920, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ec000) = 0x7fec37108000
mmap(0x7fec3711c000, 5168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fec3711c000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libcap.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@|\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=43064, ...}) = 0
mmap(NULL, 45128, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec36f10000
mmap(0x7fec36f13000, 20480, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7fec36f13000
mmap(0x7fec36f18000, 8192, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0x7fec36f18000
mmap(0x7fec36f1a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x9000) = 0x7fec36f1a000
close(3)                                = 0
openat(AT_FDCWD, "/usr/lib/libicudata.so.76", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=31859544, ...}) = 0
mmap(NULL, 31862784, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fec350ad000
mmap(0x7fec36f0f000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1e61000) = 0x7fec36f0f000
close(3)                                = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec41405000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec350ab000
mmap(NULL, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec350a8000
arch_prctl(ARCH_SET_FS, 0x7fec350a8b80) = 0
set_tid_address(0x7fec350a8e50)         = 113
set_robust_list(0x7fec350a8e60, 24)     = 0
rseq(0x7fec350a86a0, 0x20, 0, 0x53053053) = 0
mprotect(0x7fec37b62000, 16384, PROT_READ) = 0
mprotect(0x7fec36f0f000, 4096, PROT_READ) = 0
mprotect(0x7fec36f1a000, 4096, PROT_READ) = 0
mprotect(0x7fec373ec000, 4096, PROT_READ) = 0
mprotect(0x7fec372de000, 4096, PROT_READ) = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec350a6000
mprotect(0x7fec3766c000, 69632, PROT_READ) = 0
mprotect(0x7fec37108000, 77824, PROT_READ) = 0
mprotect(0x7fec37188000, 16384, PROT_READ) = 0
mprotect(0x7fec372a8000, 36864, PROT_READ) = 0
mprotect(0x7fec41476000, 4096, PROT_READ) = 0
mprotect(0x7fec377ac000, 36864, PROT_READ) = 0
mprotect(0x7fec377eb000, 8192, PROT_READ) = 0
mprotect(0x7fec377fb000, 4096, PROT_READ) = 0
mprotect(0x7fec3784d000, 8192, PROT_READ) = 0
mprotect(0x7fec3786e000, 8192, PROT_READ) = 0
mprotect(0x7fec37876000, 4096, PROT_READ) = 0
mprotect(0x7fec3795b000, 4096, PROT_READ) = 0
mprotect(0x7fec4140e000, 4096, PROT_READ) = 0
mmap(NULL, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec350a3000
mmap(NULL, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec3509e000
mmap(NULL, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec35095000
mmap(NULL, 69632, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec35084000
mprotect(0x7fec40f08000, 2023424, PROT_READ) = 0
mprotect(0x7fec4145b000, 12288, PROT_READ) = 0
mprotect(0x7fec41492000, 4096, PROT_READ) = 0
mprotect(0x7fec41403000, 4096, PROT_READ) = 0
mprotect(0x5645aff02000, 40960, PROT_READ) = 0
mprotect(0x7fec41512000, 8192, PROT_READ) = 0
prlimit64(0, RLIMIT_STACK, NULL, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
getrandom("\xa3\xe5\xc9\xfe\xb3\x06\x4d\xe2", 8, GRND_NONBLOCK) = 8
munmap(0x7fec41494000, 234755)          = 0
prctl(PR_CAPBSET_READ, CAP_MAC_OVERRIDE) = 1
prctl(PR_CAPBSET_READ, 0x30 /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, CAP_CHECKPOINT_RESTORE) = 1
prctl(PR_CAPBSET_READ, 0x2c /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, 0x2a /* CAP_??? */) = -1 EINVAL (Invalid argument)
prctl(PR_CAPBSET_READ, 0x29 /* CAP_??? */) = -1 EINVAL (Invalid argument)
futex(0x7fec3767e6bc, FUTEX_WAKE_PRIVATE, 2147483647) = 0
brk(NULL)                               = 0x5645b48fe000
brk(0x5645b4931000)                     = 0x5645b4931000
lseek(2, 0, SEEK_CUR)                   = -1 ESPIPE (Illegal seek)
fstat(2, {st_mode=S_IFCHR|0600, st_rdev=makedev(0xf7, 0x1), ...}) = 0
brk(0x5645b4952000)                     = 0x5645b4952000
brk(0x5645b4973000)                     = 0x5645b4973000
openat(AT_FDCWD, "/etc/lsp.exclude", O_RDONLY) = -1 ENOENT (No such file or directory)
uname({sysname="Linux", nodename="(none)", ...}) = 0
shmget(0xa5723213, 16384, IPC_CREAT|IPC_EXCL|0666) = -1 EEXIST (File exists)
shmget(0xa5723213, 16384, 000)          = 0
shmat(0, NULL, SHM_RDONLY)              = 0x7fec414ca000
rt_sigaction(SIGSEGV, {sa_handler=0x5645af38f34a, sa_mask=[], sa_flags=SA_RESTORER|SA_RESETHAND, sa_restorer=0x7fec3799b540}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {sa_handler=0x7fec379f10b0, sa_mask=[], sa_flags=SA_RESTORER|SA_ONSTACK|SA_RESTART|SA_SIGINFO, sa_restorer=0x7fec3799b540}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
mmap(NULL, 29888, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_STACK, -1, 0) = 0x7fec414c2000
madvise(0x7fec414c2000, 4096, MADV_GUARD_INSTALL) = 0
rt_sigprocmask(SIG_BLOCK, ~[], [], 8)   = 0
clone3({flags=CLONE_VM|CLONE_FS|CLONE_FILES|CLONE_SIGHAND|CLONE_THREAD|CLONE_SYSVSEM|CLONE_SETTLS|CLONE_PARENT_SETTID|CLONE_CHILD_CLEARTID, child_tid=0x7fec414c8e50, parent_tid=0x7fec414c8e50, exit_signal=0, stack=0x7fec414c2000, stack_size=0x6000, tls=0x7fec414c8b80} => {parent_tid=[114]}, 88) = 114
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
futex(0x7fec37b6d164, FUTEX_WAKE_PRIVATE, 2147483647) = 0
timer_create(CLOCK_MONOTONIC, {sigev_value={sival_int=-1265235616, sival_ptr=0x5645b4960960}, sigev_signo=SIGRTMIN, sigev_notify=SIGEV_THREAD_ID, sigev_notify_thread_id=114}, [0]) = 0
add_key("asymmetric", "libbpf_session_key", "0\202\00300\202\2\30\240\3\2\1\2\2\24]HD\257\377\227\344q\271\355:E\275\231\31_\343"..., 820, KEY_SPEC_SESSION_KEYRING) = 325994835
openat(AT_FDCWD, "/proc/sys/net/core/bpf_jit_enable", O_RDONLY) = 3
read(3, "1", 1)                         = 1
close(3)                                = 0
openat(AT_FDCWD, "/sys/devices/system/cpu/possible", O_RDONLY|O_CLOEXEC) = 3
read(3, "0-1\n", 128)                   = 4
close(3)                                = 0
membarrier(MEMBARRIER_CMD_GLOBAL, 0)    = 0
delete_module("bpf_testmod", 0)         = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "bpf_testmod.ko", O_RDONLY) = 3
^[]3008;start=ff126f78-0796-4dc6-956f-04398a266a4b;user=;hostname=(none);machineid=1cdaf5cebfab41c8bca955e04060bc11;bootid=8254b42e-c5c7-48f5-bc17-fa49d2399b37;pid=83;type=shell;cwd=/^[\^[[?2004h[root@(none) /]# [    1.959758] bpf_testmod: loading out-of-tree module taints kernel.
[    1.960037] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
finit_module(3, "", 0)                  = 0
close(3)                                = 0
openat(AT_FDCWD, "/proc/self/ns/net", O_RDONLY) = 3
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=10, tv_nsec=0}}, NULL) = 0
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=10, tv_nsec=0}}, NULL) = 0
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=10, tv_nsec=0}}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, ~[], [], 8)   = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_DROPPABLE|MAP_ANONYMOUS, -1, 0) = 0x7fec414d0000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fec414c1000
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
getrandom("\x22\x5c\x2f\x55\x16\xb2\xd6\xc7\x71\x94\x19\xa3\x17\xd5\x2e\x1c\xd5\xc9\xdf\x1b\xcb\xab\x01\x2d\x94\x37\x66\xb9\x88\x0a\xcd\x9c", 32, 0) = 32
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.Pf280c", O_RDWR|O_CREAT|O_EXCL, 0600) = 4
fcntl(4, F_GETFL)                       = 0x8002 (flags O_RDWR|O_LARGEFILE)
fstat(4, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
write(4, "# comment\n  test_with_spaces    "..., 175) = 175
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.Pf280c", O_RDONLY) = 5
fstat(5, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
read(5, "", 8192)                       = 0
close(5)                                = 0
close(4)                                = 0
unlink("/tmp/bpf_arg_parsing_test.Pf280c") = 0
timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=0, tv_nsec=0}}, NULL) = 0
sched_setaffinity(0, 128, [0 1])        = 0
sched_setaffinity(113, 128, [0 1])      = 0
setns(3, CLONE_NEWNET)                  = 0
fstat(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(0xf7, 0x1), ...}) = 0
ioctl(1, TCGETS2, 0x7ffd7b575a60)       = -1 ENOTTY (Inappropriate ioctl for device)
close(3)                                = 0
membarrier(MEMBARRIER_CMD_GLOBAL, 0)    = 0
delete_module("bpf_testmod", 0)         = 0
shmdt(0x7fec414ca000)                   = 0
write(1, "#7/1     arg_parsing/test_parse_"..., 833#7/1     arg_parsing/test_parse_test_list:OK
test_parse_test_list_file:PASS:create tmp 0 nsec
test_parse_test_list_file:PASS:fdopen tmp 0 nsec
test_parse_test_list_file:PASS:prepare tmp 0 nsec
test_parse_test_list_file:PASS:parse file 0 nsec
test_parse_test_list_file:FAIL:test  count unexpected test  count: actual 0 != expected 4
#7/2     arg_parsing/test_parse_test_list_file:FAIL
#7       arg_parsing:FAIL

All error logs:
test_parse_test_list_file:PASS:create tmp 0 nsec
test_parse_test_list_file:PASS:fdopen tmp 0 nsec
test_parse_test_list_file:PASS:prepare tmp 0 nsec
test_parse_test_list_file:PASS:parse file 0 nsec
test_parse_test_list_file:FAIL:test  count unexpected test  count: actual 0 != expected 4
#7/2     arg_parsing/test_parse_test_list_file:FAIL
#7       arg_parsing:FAIL
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
) = 833
exit_group(1)                           = ?
+++ exited with 1 +++
Command failed with exit code: 1

Re: strace log before the fix, with fsync fix and with fclose fix.

[Alexei Starovoitov]

On Mon, Oct 20, 2025 at 1:59 AM Xing Guo <higuoxing@gmail.com> wrote:
>
> Test with fsync:

I doubt people will be reading this giant log.
Please bisect it instead.
Since it's not reproducible when /tmp is backed by tmpfs
it's probably some change in vfs or in the file system that
your laptop is using for /tmp.
It changes a user visible behavior of the file system and
needs to be investigated, since it may affect more code than
just this selftest.

Re: strace log before the fix, with fsync fix and with fclose fix.

[Andrii Nakryiko]

+linux-fsdevel

On Mon, Oct 20, 2025 at 9:28 AM Alexei Starovoitov
<alexei.starovoitov@gmail.com> wrote:
>
> On Mon, Oct 20, 2025 at 1:59 AM Xing Guo <higuoxing@gmail.com> wrote:
> >
> > Test with fsync:
>
> I doubt people will be reading this giant log.
> Please bisect it instead.
> Since it's not reproducible when /tmp is backed by tmpfs
> it's probably some change in vfs or in the file system that
> your laptop is using for /tmp.
> It changes a user visible behavior of the file system and
> needs to be investigated, since it may affect more code than
> just this selftest.

dmesg output was certainly too much, but I filtered all that out. Here
are relevant pieces of strace log.

BEFORE (FAILING)
================
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.Pf280c",
O_RDWR|O_CREAT|O_EXCL, 0600) = 4
fcntl(4, F_GETFL)                       = 0x8002 (flags O_RDWR|O_LARGEFILE)
fstat(4, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
write(4, "# comment\n  test_with_spaces    "..., 175) = 175
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.Pf280c", O_RDONLY) = 5
fstat(5, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
read(5, "", 8192)                       = 0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -- THIS IS BAD, NO CONTENTS
close(5)                                = 0
close(4)                                = 0
unlink("/tmp/bpf_arg_parsing_test.Pf280c") = 0

WITH SYNC
=========
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.UK5nUq",
O_RDWR|O_CREAT|O_EXCL, 0600) = 4
fcntl(4, F_GETFL)                       = 0x8002 (flags O_RDWR|O_LARGEFILE)
fstat(4, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
write(4, "# comment\n  test_with_spaces    "..., 175) = 175
fsync(4)                                = 0
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.UK5nUq", O_RDONLY) = 5
fstat(5, {st_mode=S_IFREG|0600, st_size=175, ...}) = 0
read(5, "# comment\n  test_with_spaces    "..., 8192) = 175
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -- GOOD,
because fsync(4) before second openat()
read(5, "", 8192)                       = 0
close(5)                                = 0
close(4)                                = 0
unlink("/tmp/bpf_arg_parsing_test.UK5nUq") = 0

WITH CLOSE
==========
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.WavYEa",
O_RDWR|O_CREAT|O_EXCL, 0600) = 4
fcntl(4, F_GETFL)                       = 0x8002 (flags O_RDWR|O_LARGEFILE)
fstat(4, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
write(4, "# comment\n  test_with_spaces    "..., 175) = 175
close(4)                                = 0
openat(AT_FDCWD, "/tmp/bpf_arg_parsing_test.WavYEa", O_RDONLY) = 4
fstat(4, {st_mode=S_IFREG|0600, st_size=175, ...}) = 0
read(4, "# comment\n  test_with_spaces    "..., 8192) = 175
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -- GOOD,
because close(4) before second openat()
read(4, "", 8192)                       = 0
close(4)                                = 0
unlink("/tmp/bpf_arg_parsing_test.WavYEa") = 0


So as can be seen above, kernel does see the write(4, <175 bytes of
content>) in all cases (so libc's fflush(fp) works as expected), but
without either fsync(4) or close(4), kernel won't return those 175
bytes if we open() same file (returning FD 5 this time).

Is that a reasonable behavior of the kernel? I don't know, it would be
good for FS folks to double check/confirm. The complication here is
that we have two FDs open against the same underlying file (so my
assumption is that kernel should share underlying page cache data),
and documentation I've found isn't particularly clear on guarantees in
that case.

write()'s man page states:

  > POSIX requires that a read(2) which can be proved to occur after a
write() has returned returns the new data. Note that not all file
systems are POSIX conforming.

(but this doesn't clarify if all this is applied only within the same *FD*)

POSIX itself says:

  > Writes can be serialized with respect to other reads and writes.
If a read() of file data can be proven (by any means) to occur after a
write() of the data, it must reflect that write(), even if the calls
are made by different processes. A similar requirement applies to
multiple write operations to the same file position. This is needed to
guarantee the propagation of data from write() calls to subsequent
read() calls. This requirement is particularly significant for
networked file systems, where some caching schemes violate these
semantics.

But again, no mention of multiple FDs opened against the same underlying file.

So unclear, which is why it would be nice for FS folks to double
check. It's certainly a change in behavior, it used to work reliably
before. [0] is the source code of the test (and note that we now added
fsync(), without it the test is now broken).

  [0] https://github.com/torvalds/linux/blob/master/tools/testing/selftests/bpf/prog_tests/arg_parsing.c

Re: strace log before the fix, with fsync fix and with fclose fix.

[Dominique Martinet]

Andrii Nakryiko wrote on Mon, Oct 20, 2025 at 01:12:16PM -0700:
> So unclear, which is why it would be nice for FS folks to double
> check. It's certainly a change in behavior, it used to work reliably
> before. [0] is the source code of the test (and note that we now added
> fsync(), without it the test is now broken).

It's a 9p bug, sorry.
tentative fix:
https://lkml.kernel.org/r/20251022-mmap-regression-v1-1-980365ee524e@codewreck.org

other thread with repro:
https://lkml.kernel.org/r/CAHzjS_u_SYdt5=2gYO_dxzMKXzGMt-TfdE_ueowg-Hq5tRCAiw@mail.gmail.com

I'll send the fix to Linus once someone can confirm this works for this
usecase as well (and try to improve our testing a bit... maybe just run
the bpf test suite for starters)
-- 
Dominique Martinet | Asmadeus

Re: [PATCH bpf v6] selftests: arg_parsing: Ensure data is flushed to disk before reading.

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to bpf/bpf.git (master)
by Andrii Nakryiko <andrii@kernel.org>:

On Thu, 16 Oct 2025 11:53:30 +0800 you wrote:
> test_parse_test_list_file writes some data to
> /tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
> the data back.  However, after writing data to that file, we forget to
> call fsync() and it's causing testing failure in my laptop.  This patch
> helps fix it by adding the missing fsync() call.
> 
> Fixes: 64276f01dce8 ("selftests/bpf: Test_progs can read test lists from file")
> Signed-off-by: Xing Guo <higuoxing@gmail.com>
> 
> [...]

Here is the summary with links:
  - [bpf,v6] selftests: arg_parsing: Ensure data is flushed to disk before reading.
    https://git.kernel.org/bpf/bpf/c/0c1999ed3372

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html