[ANN] Kselftest integration into Kernel CI

[ANN] Kselftest integration into Kernel CI

[Shuah Khan]

Integrating Kselftest into Kernel CI rings depends on Kselftest build
and install framework to support Kernel CI use-cases. I am kicking off
an effort to support Kselftest runs in Kernel CI rings. Running these
tests in Kernel CI rings will help quality of kernel releases, both
stable and mainline.

What is required for full support?

1. Cross-compilation & relocatable build support
2. Generates objects in objdir/kselftest without cluttering main objdir
3. Leave source directory clean
4. Installs correctly in objdir/kselftest/kselftest_install and adds
    itself to run_kselftest.sh script generated during install.

Note that install step is necessary for all files to be installed for
run time support.

I looked into the current status and identified problems. The work is
minimal to add full support. Out of 80+ tests, 7 fail to cross-build
and 1 fails to install correctly.

List is below:

Tests fails to build: bpf, capabilities, kvm, memfd, mqueue, timens, vm
Tests fail to install: android (partial failure)
Leaves source directory dirty: bpf, seccomp

I have patches ready for the following issues:

Kselftest objects (test dirs) clutter top level object directory.
seccomp_bpf generates objects in the source directory.

I created a topic branch to collect all the patches:

https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/?h=kernelci

I am going to start working on build problems. If anybody is
interested in helping me with this effort, don't hesitate to
contact me. I first priority is fixing build and install and
then look into tests that leave the source directory dirty.

Detailed report can be found here:

https://drive.google.com/file/d/11nnWOKIzzOrE4EiucZBn423lzSU_eNNv/view?usp=sharing

thanks,
-- Shuah

RE: [ANN] Kselftest integration into Kernel CI

[Bird, Tim]

> -----Original Message-----
> From:  Shuah Khan
> 
> Integrating Kselftest into Kernel CI rings depends on Kselftest build
> and install framework to support Kernel CI use-cases. I am kicking off
> an effort to support Kselftest runs in Kernel CI rings. Running these
> tests in Kernel CI rings will help quality of kernel releases, both
> stable and mainline.
> 
> What is required for full support?
> 
> 1. Cross-compilation & relocatable build support
> 2. Generates objects in objdir/kselftest without cluttering main objdir
> 3. Leave source directory clean
> 4. Installs correctly in objdir/kselftest/kselftest_install and adds
>     itself to run_kselftest.sh script generated during install.
> 
> Note that install step is necessary for all files to be installed for
> run time support.
> 
> I looked into the current status and identified problems. The work is
> minimal to add full support. Out of 80+ tests, 7 fail to cross-build
> and 1 fails to install correctly.
> 
> List is below:
> 
> Tests fails to build: bpf, capabilities, kvm, memfd, mqueue, timens, vm
> Tests fail to install: android (partial failure)
> Leaves source directory dirty: bpf, seccomp
> 
> I have patches ready for the following issues:
> 
> Kselftest objects (test dirs) clutter top level object directory.
> seccomp_bpf generates objects in the source directory.
> 
> I created a topic branch to collect all the patches:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/?h=kernelci
> 
> I am going to start working on build problems. If anybody is
> interested in helping me with this effort, don't hesitate to
> contact me. I first priority is fixing build and install and
> then look into tests that leave the source directory dirty.

I'm interested in this.  I'd like the same cleanups in order to run
kselftest in Fuego, and I can try it with additional toolchains
and boards.  Unfortunately, in terms of running tests, almost all
the boards in my lab are running old kernels.  So the tests results
aren't useful for upstream work.  But I can still test
compilation and install issues, for the kselftest tests themselves.

> 
> Detailed report can be found here:
> 
> https://drive.google.com/file/d/11nnWOKIzzOrE4EiucZBn423lzSU_eNNv/view?usp=sharing

Is there anything you'd like me to look at specifically?  Do you want me to start
at the bottom of the list and work up?  I could look at 'vm' or 'timens'.

   -- Tim

Re: [ANN] Kselftest integration into Kernel CI

[Shuah Khan]

On 2/28/20 10:50 AM, Bird, Tim wrote:
> 
> 
>> -----Original Message-----
>> From:  Shuah Khan
>>
>> Integrating Kselftest into Kernel CI rings depends on Kselftest build
>> and install framework to support Kernel CI use-cases. I am kicking off
>> an effort to support Kselftest runs in Kernel CI rings. Running these
>> tests in Kernel CI rings will help quality of kernel releases, both
>> stable and mainline.
>>
>> What is required for full support?
>>
>> 1. Cross-compilation & relocatable build support
>> 2. Generates objects in objdir/kselftest without cluttering main objdir
>> 3. Leave source directory clean
>> 4. Installs correctly in objdir/kselftest/kselftest_install and adds
>>      itself to run_kselftest.sh script generated during install.
>>
>> Note that install step is necessary for all files to be installed for
>> run time support.
>>
>> I looked into the current status and identified problems. The work is
>> minimal to add full support. Out of 80+ tests, 7 fail to cross-build
>> and 1 fails to install correctly.
>>
>> List is below:
>>
>> Tests fails to build: bpf, capabilities, kvm, memfd, mqueue, timens, vm
>> Tests fail to install: android (partial failure)
>> Leaves source directory dirty: bpf, seccomp
>>
>> I have patches ready for the following issues:
>>
>> Kselftest objects (test dirs) clutter top level object directory.
>> seccomp_bpf generates objects in the source directory.
>>
>> I created a topic branch to collect all the patches:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/?h=kernelci
>>
>> I am going to start working on build problems. If anybody is
>> interested in helping me with this effort, don't hesitate to
>> contact me. I first priority is fixing build and install and
>> then look into tests that leave the source directory dirty.
> 
> I'm interested in this.  I'd like the same cleanups in order to run
> kselftest in Fuego, and I can try it with additional toolchains
> and boards.  Unfortunately, in terms of running tests, almost all
> the boards in my lab are running old kernels.  So the tests results
> aren't useful for upstream work.  But I can still test
> compilation and install issues, for the kselftest tests themselves.
> 

Testing compilation and install issues is very valuable. This is one
area that hasn't been test coverage compared to running tests. So it
great if you can help with build/install on linux-next to catch
problems in new tests. I am finding that older tests have been stable
and as new tests come in, we tend to miss catching these types of
problems.

Especially cross-builds and installs on arm64 and others.

>>
>> Detailed report can be found here:
>>
>> https://drive.google.com/file/d/11nnWOKIzzOrE4EiucZBn423lzSU_eNNv/view?usp=sharing
> 
> Is there anything you'd like me to look at specifically?  Do you want me to start
> at the bottom of the list and work up?  I could look at 'vm' or 'timens'.
> 

Yes you can start with vm and timens.

thanks,
-- Shuah