Linux LVM users
 help / color / mirror / Atom feed
From: "Heinz J . Mauelshagen" <mauelshagen@sistina.com>
To: linux-lvm@sistina.com
Subject: Re: [linux-lvm] vgscan errors
Date: Tue Mar  5 15:34:02 2002	[thread overview]
Message-ID: <20020305223226.A19035@sistina.com> (raw)
In-Reply-To: <3C85289C.8060606@theiqgroup.com>; from kcorbin@theiqgroup.com on Tue, Mar 05, 2002 at 02:20:44PM -0600

On Tue, Mar 05, 2002 at 02:20:44PM -0600, Kelly Corbin wrote:
> Well, after rooting around, it looks like my partition table was screwed 
> up.  However, when try to create the vg and lv again (after re-fdisking 
> the disk) it fails at the lv creation.  Vgcreate works with no problem; 
> I can reboot and re-activate the vg I just created.  When I run 
> lvcreate, I get the following error:
> 
> #lvcreate -l23722 -nfirst_lv first_vg
> lvcreate -- ERROR 0 writing volume group backup file 
> /etc/lvmtab.d/first_vg.tmp in vg_cfgbackup.c [line 268]
> lvcreate --  WARNING: you don't have an automatic backup of "first_vg"
> lvcreate -- logical volume "/dev/first_vg/first_lv successfully created.
> 
> vgdisplay then shows the correct number of free/used extents (1 free, 
> the rest used), but a vgscan now will fail miserably (before or after 
> reboot) with the same error (ERROR 2)
> 
> This is a new disk that I'm trying to setup for the first time.
> 
> Ideas?

It is probably too little free space in the root fs.
Because you've got somany extents the size of the metadata backup is bigger
as well.

Check your root fs free space, please.

> 
> Thanks.
> 
> 
> Heinz J . Mauelshagen wrote:
> 
> > Error 2 is ENOENT (no entry).
> > Could be a space problem in case / run full.
> > 
> > Regards,
> > Heinz    -- The LVM Guy --
> > 
> 
> 
> 
> -- 
> --------------------------------------------
> -- Kelly Corbin
> -- Systems Administrator
> --
> -- http://www.theiqgroup.com
> -- The Future of eServices...
> --
> -- The IQ Group, Inc.
> -- 6740 Antioch Suite 110
> -- Merriam, KS 66204
> -- (913)-722-6700 x105
> -- Fax (913)722-7264
> --------------------------------------------
> 
> 
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@sistina.com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html

-- 

Regards,
Heinz    -- The LVM Guy --

*** Software bugs are stupid.
    Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen                                 Sistina Software Inc.
Senior Consultant/Developer                       Am Sonnenhang 11
                                                  56242 Marienrachdorf
                                                  Germany
Mauelshagen@Sistina.com                           +49 2626 141200
                                                       FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

  reply	other threads:[~2002-03-05 15:34 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-03-04 11:22 [linux-lvm] vgscan errors Kelly Corbin
2002-03-04 17:26 ` Heinz J . Mauelshagen
2002-03-05 14:20   ` Kelly Corbin
2002-03-05 15:34     ` Heinz J . Mauelshagen [this message]
2002-03-05 16:49       ` Kelly Corbin
2002-03-05 18:00         ` [linux-lvm] PV-Move fails, now at 127 Pe's Denie Andriessen
2002-03-06  3:56           ` Heinz J . Mauelshagen
2002-03-06  5:02             ` Denie Andriessen
2002-03-06  5:13               ` Heinz J . Mauelshagen
2002-03-06  5:37               ` Heinz J . Mauelshagen
2002-03-06 19:07               ` Denie Andriessen
2002-03-08 14:19                 ` Denie Andriessen
2002-03-06  5:04             ` Denie Andriessen
2002-03-06  9:01             ` Denie Andriessen
2002-03-07 11:17         ` [linux-lvm] vgscan errors Kelly Corbin
2002-03-08  2:47           ` Heinz J . Mauelshagen
2002-03-08  3:12             ` Andreas Dilger
2002-03-08  6:37               ` Heinz J . Mauelshagen
2002-03-08 16:50                 ` Goetz Bock
2002-03-09 11:47                   ` [linux-lvm] Mounting Reiserfs errors Laurentiu Simion

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20020305223226.A19035@sistina.com \
    --to=mauelshagen@sistina.com \
    --cc=linux-lvm@sistina.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox