From: "Heinz J . Mauelshagen" <mauelshagen@sistina.com>
To: linux-lvm@sistina.com
Subject: Re: [linux-lvm] PV-Move fails, now at 127 Pe's...
Date: Wed Mar 6 05:37:02 2002 [thread overview]
Message-ID: <20020306123534.A22533@sistina.com> (raw)
In-Reply-To: <Pine.LNX.4.33.0203061156070.5102-100000@blok14b.gimmie.tudelft.nl>; from denie@pink.nl on Wed, Mar 06, 2002 at 12:02:29PM +0100
Denie,
got service unavailable for denie@blok14b.gimmie.tudelft.nl :-(
Regards,
Heinz -- The LVM Guy --
On Wed, Mar 06, 2002 at 12:02:29PM +0100, Denie Andriessen wrote:
> Hi,
>
> So now the volume is inactive, I can't change it, although it notices
> there is an inactive volume on the disks...
>
> hdb1 and hdc1 both have 127 blocks on there now, and hdg1 has 2*127 block
> removed. I can't access the data anymore now... Any suggestions on how to
> get the volume back online, so the data can be accessed ???
>
> -------------
> vgscan -- only found 20391 of 20518 LEs for LV /dev/volume/data (0)
> vgscan -- ERROR "vg_read_with_pv_and_lv(): allocated LE of LV" can't
> get data of volume group "volume" from physical volume(s)
> -------------
>
> Denie
>
>
> On Wed, 6 Mar 2002, Heinz J . Mauelshagen wrote:
>
> >
> > Well, you hit the cast problem I reported a fix for on linux-lvm shortly
> > after the LVM 1.0.3 release.
> >
> > Sorry for the inconvenience!
> >
> > Here's the patch again.
> >
> > Regards,
> > Heinz -- The LVM Guy --
> >
> > On Wed, Mar 06, 2002 at 01:05:53AM +0100, Denie Andriessen wrote:
> > > Hi,
> > >
> > > So, I've updated my lvm tools from 0.9.1-beta2 to 1.0.3., and now I seem to
> > > have ran into quite some problems..
> > >
> > > Ran all test of the move again, and after a few faultless flows I started
> > > off again..
> > > We have a volume with 4 * 60, 2 * 80 disk, and another volume (new one, new
> > > disk) with 120Gb.
> > >
> > > I'd like to move one 60Gb disk to the volume with the 120 Gb disk.
> > >
> > > E2fsran nicely, then I started with a PV move, to get /dev/hdc1 out (after
> > > failing the first time I tries also to move /dev/hdb1 out) both failing at
> > > the same point, that is with 127 PE's moved...
> > >
> > > Any takers ?
> > >
> > > Regards,
> > > ------- info-----------
> > > pvmove -- writing physical extent part of VGDA on destination "/dev/hdg1"
> > > lv: /dev/volume/data[1] old_dev: 22:01 new_dev: 34:01 old_pe_sector:
> > > 4176642 new_pe_sector: 47036865
> > > pvmove -- opening output physical volume "/dev/hdg1"
> > > pvmove -- llseeking input physical volume "/dev/hdc1"
> > > pvmove -- llseeking output physical volume "/dev/hdg1"
> > > pvmove -- /dev/hdc1 [PE 127 [data [LE 7328]] -> /dev/hdg1 [PE 1435]
> > > [128/3577]
> > > pvmove -- locking physical extent 127 of "/dev/hdc1" in kernel
> > > pvmove -- about to read input physical volume "/dev/hdc1" and to write
> > > output physical volume "/dev/hdg1"
> > > pvmove -- ERROR reading input physical volume "/dev/hdc1" (still 7733248
> > > bytes to read)
> > > pvmove -- ERROR "pv_move_pe(): read input PV" moving physical extents
> > >
> > > [root@localhost /]# lvscan
> > > lvscan -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
> > > vgscan
> > >
> > > [root@localhost /]# vgscan
> > > vgscan -- reading all physical volumes (this may take a while...)
> > > vgscan -- found active volume group "volume"
> > > vgscan -- only found 20391 of 20518 LEs for LV /dev/volume/data (0)
> > > vgscan -- ERROR "vg_read_with_pv_and_lv(): allocated LE of LV" can't get
> > > data of volume group "volume" from physical volume(s)
> > > vgscan -- found active volume group "mp3volume"
> > > vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
> > > vgscan -- WARNING: This program does not do a VGDA backup of your volume
> > > groups
> > >
> > > [root@localhost /]# lvscan
> > > lvscan -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
> > > vgscan
> > >
> > > [root@localhost /]# vgdisplay
> > > vgdisplay -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
> > > vgscan
> > >
> > > [root@localhost /]# vgdisplay -v volume
> > > vgdisplay -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
> > > vgscan
> > >
> > >
> > >
> > > _______________________________________________
> > > linux-lvm mailing list
> > > linux-lvm@sistina.com
> > > http://lists.sistina.com/mailman/listinfo/linux-lvm
> > > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
> >
> > *** Software bugs are stupid.
> > Nevertheless it needs not so stupid people to solve them ***
> >
> > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> >
> > Heinz Mauelshagen Sistina Software Inc.
> > Senior Consultant/Developer Am Sonnenhang 11
> > 56242 Marienrachdorf
> > Germany
> > Mauelshagen@Sistina.com +49 2626 141200
> > FAX 924446
> > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> >
> > _______________________________________________
> > linux-lvm mailing list
> > linux-lvm@sistina.com
> > http://lists.sistina.com/mailman/listinfo/linux-lvm
> > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
> >
>
> --
>
>
>
>
> ----- geekcode sig file -----
> GCM/GCS/GS d- s: a C++$ U+++$ P+++$ L++$ E- W+++$ N++ u K w++ O M
> V PS PE++ Y+ PGP t+ 5 X++ R tv- b++ DI++ D+ G e+++ h-- r+>++ y++
> -----------------------------
>
>
>
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@sistina.com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Sistina Software Inc.
Senior Consultant/Developer Am Sonnenhang 11
56242 Marienrachdorf
Germany
Mauelshagen@Sistina.com +49 2626 141200
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2002-03-06 5:37 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-04 11:22 [linux-lvm] vgscan errors Kelly Corbin
2002-03-04 17:26 ` Heinz J . Mauelshagen
2002-03-05 14:20 ` Kelly Corbin
2002-03-05 15:34 ` Heinz J . Mauelshagen
2002-03-05 16:49 ` Kelly Corbin
2002-03-05 18:00 ` [linux-lvm] PV-Move fails, now at 127 Pe's Denie Andriessen
2002-03-06 3:56 ` Heinz J . Mauelshagen
2002-03-06 5:02 ` Denie Andriessen
2002-03-06 5:13 ` Heinz J . Mauelshagen
2002-03-06 5:37 ` Heinz J . Mauelshagen [this message]
2002-03-06 19:07 ` Denie Andriessen
2002-03-08 14:19 ` Denie Andriessen
2002-03-06 5:04 ` Denie Andriessen
2002-03-06 9:01 ` Denie Andriessen
2002-03-07 11:17 ` [linux-lvm] vgscan errors Kelly Corbin
2002-03-08 2:47 ` Heinz J . Mauelshagen
2002-03-08 3:12 ` Andreas Dilger
2002-03-08 6:37 ` Heinz J . Mauelshagen
2002-03-08 16:50 ` Goetz Bock
2002-03-09 11:47 ` [linux-lvm] Mounting Reiserfs errors Laurentiu Simion
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020306123534.A22533@sistina.com \
--to=mauelshagen@sistina.com \
--cc=linux-lvm@sistina.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox