[linux-lvm] lvm help

[linux-lvm] lvm help

[Pierre Lamb]

I placed the 2 required commands in rc.sysinit (rh71)
before hte section "Mounting other file"
gave vgscan the -d option and left vgchange -ay.
During the boot process I see where vscan uodated
lvmtab and lvmtab.d and it say successfull but when I
look into lvmd.d it is empty. after I log in then do
the vgscan the correct entries are made. Ant help
would be appreciated.

Pierre

[linux-lvm] LVM help

[Rajesh Akula]

I have 154 disks.
136 of them are 36GB
18 are 73Gb
I made two partitions on all these disks. First partitions is 31Gb
rest of the space is second partition.
I am trying to create one big logical volume group of 1.1TB on the
second partition on all the disks.
Here is the script I used to create volume group
vgcreate volgroup1 /dev/sdb2......................./dev/sdey (154 disks)
lvcreate -i 154 -I 16 -L 1100G -n lv01 volgroup18
Failed and the got the following message.
Number of stripes (154) must be between 1 and 128.
The I changed number of stripes to 128 ran the script like this
lvcreate -i 154 -I 16 -L 1100G -n lv01 volgroup18
Rounding size (17600 extents) up to stripe boundary size (17664 extents)
Insufficient allocatable extents suitable for parallel use for
logical volume lv01: 17664 required

Here is how vgdisplay shows. Somebody please help. I am new to LINUX.
BTW this is Suse Linux Enterprize edition 9.
le576p2:~ # vgdisplay
--- Volume group ---
VG Name               volgroup18
System ID
Format                lvm2
Metadata Areas        128
Metadata Sequence No  1
VG Access             read/write
VG Status             resizable
MAX LV                255
Cur LV                0
Open LV               0
Max PV                255
Cur PV                128
Act PV                128
VG Size               1.22 TB
PE Size               64.00 MB
Total PE              19923
Alloc PE / Size       0 / 0
Free  PE / Size       19923 / 1.22 TB
VG UUID               zdkjo6-8jtQ-PHUU-bUfa-ysor-jAM4-QTOWqn

[linux-lvm] lvm help

[Pierre Lamb]

help 
I placed the 2 required commands in rc.sysinit (rh71)
before hte section "Mounting other file"
gave vgscan the -d option and left vgchange -ay.
During the boot process I see where vscan uodated
lvmtab and lvmtab.d and it say successfull but when I
look into lvmd.d it is empty. after I log in then do
the vgscan the correct entries are made. Ant help
would be appreciated.

Pierre

__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

Re: [linux-lvm] lvm help

[AJ Lewis]

[-- Attachment #1: Type: text/plain, Size: 1189 bytes --]

On Thu, Jul 26, 2001 at 11:55:22AM -0700, Pierre Lamb wrote:
> help 
> I placed the 2 required commands in rc.sysinit (rh71)
> before hte section "Mounting other file"
> gave vgscan the -d option and left vgchange -ay.
> During the boot process I see where vscan uodated
> lvmtab and lvmtab.d and it say successfull but when I
> look into lvmd.d it is empty. after I log in then do
> the vgscan the correct entries are made. Ant help
> would be appreciated.

We got it...we're thinking...please hold...

-- 
AJ Lewis
Sistina Software Inc.                  Voice:  612-638-0500
1313 5th St SE, Suite 111              Fax:    612-638-0500
Minneapolis, MN 55414                  E-Mail: lewis@sistina.com
http://www.sistina.com

Current GPG fingerprint = 3B5F 6011 5216 76A5 2F6B  52A0 941E 1261 0029 2648
Get my key at: http://www.sistina.com/~lewis/gpgkey
 (Unfortunately, the PKS-type keyservers do not work with multiple sub-keys)

-----Begin Obligatory Humorous Quote----------------------------------------
There are two ways to write error-free programs. Only the third one works.
-----End Obligatory Humorous Quote------------------------------------------

[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]

[linux-lvm] lvm help

[Pierre Lamb]

I placed the 2 required commands in rc.sysinit (rh71)
before hte section "Mounting other file"
gave vgscan the -d option and left vgchange -ay.
During the boot process I see where vscan uodated
lvmtab and lvmtab.d and it say successfull but when I
look into lvmd.d it is empty. after I log in then do
the vgscan the correct entries are made. Ant help
would be appreciated.

Pierre



__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

[linux-lvm] lvm help

[Pierre Lamb]

I recomplied my kernel (2.4.3-12) to include lvm as a
module, added the entries to "modules.conf" made the
pe/vg/lvol finally added vgscan and vgchange -ay to
rc.sysinit before hte line mounting the other fs.  The
problem is it does not do the vgscan/vgchane during
the boot ptocess thus forcing me to do these 2 steps
after logging in. What am I missing

Pierre

__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/