[linux-lvm] lvm oddities seen

[linux-lvm] lvm oddities seen

[ej_external]

Can anyone explain this for me?  I added a new hard drive to my LVM and
while lvdisplay of the LVM shows the full size of all disks/partitions in
the LVM, df -k does not:

[root@bergamo sbin]# lvscan
lvscan -- ACTIVE            "/dev/lvm01/1" [176.76 GB]
lvscan -- 1 logical volumes with 176.76 GB total in 1 volume group
lvscan -- 1 active logical volumes

[root@bergamo sbin]# lvdisplay /dev/lvm01/1
--- Logical volume ---
LV Name                /dev/lvm01/1
VG Name                lvm01
LV Write Access        read/write
LV Status              available
LV #                   1
# open                 1
LV Size                176.76 GB
Current LE             45251
Allocated LE           45251
Allocation             next free
Read ahead sectors     120
Block device           58:0



[root@bergamo sbin]# df -k
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/hda6             10317796   3808332   5985348  39% /
/dev/hda1                62193     17850     41132  31% /boot
none                     95628         0     95628   0% /dev/shm
/dev/lvm01/1         115382824  63615676  47078212  58% /mnt/lvm01.01


So while lvm shows the lvm size to be 176.76G, df -k shows the filesystem to
be about 115G.  What is happening with this?



Another issue that I seem to be having is that the new PV that I created
from /dev/hdd shows only 8G free from pvscan/pvdisplay:

[root@bergamo sbin]# pvscan
pvscan -- reading all physical volumes (this may take a while...)
pvscan -- ACTIVE   PV "/dev/hdd"  of VG "lvm01" [111.79 GB / 8 MB free]
pvscan -- ACTIVE   PV "/dev/hda5" of VG "lvm01" [26.82 GB / 0 free]
pvscan -- ACTIVE   PV "/dev/hdb1" of VG "lvm01" [38.16 GB / 0 free]
pvscan -- total: 3 [176.78 GB] / in use: 3 [176.78 GB] / in no VG: 0 [0]

[root@bergamo sbin]# pvdisplay /dev/hdd
--- Physical volume ---
PV Name               /dev/hdd
VG Name               lvm01
PV Size               111.79 GB [234441648 secs] / NOT usable 4.25 MB [LVM:
235 KB]
PV#                   3
PV Status             available
Allocatable           yes
Cur LV                1
PE Size (KByte)       4096
Total PE              28617
Free PE               2
Allocated PE          28615
PV UUID               wF1oDQ-XM4S-GfAV-xoir-l5m5-9HZC-QECX9g


[root@bergamo sbin]#



Obviously I'm doing something wrong here - but I can't figure it out.

Does anyone have any suggestions?  At this point, I'd be willing to yank
/dev/hdd out of the volume group, but I can't find out how to do that
either.

Thanks, Ed Jackson

Re: [linux-lvm] lvm oddities seen

[Tomasz Francuz]

>
>
>Can anyone explain this for me?  I added a new hard drive to my LVM and
>while lvdisplay of the LVM shows the full size of all disks/partitions in
>the LVM, df -k does not:
>
>[root@bergamo sbin]# lvscan
>lvscan -- ACTIVE            "/dev/lvm01/1" [176.76 GB]
>lvscan -- 1 logical volumes with 176.76 GB total in 1 volume group
>lvscan -- 1 active logical volumes
>
>[root@bergamo sbin]# lvdisplay /dev/lvm01/1
>--- Logical volume ---
>LV Name                /dev/lvm01/1
>VG Name                lvm01
>LV Write Access        read/write
>LV Status              available
>LV #                   1
># open                 1
>LV Size                176.76 GB
>Current LE             45251
>Allocated LE           45251
>Allocation             next free
>Read ahead sectors     120
>Block device           58:0
>
>
>
>[root@bergamo sbin]# df -k
>Filesystem           1k-blocks      Used Available Use% Mounted on
>/dev/hda6             10317796   3808332   5985348  39% /
>/dev/hda1                62193     17850     41132  31% /boot
>none                     95628         0     95628   0% /dev/shm
>/dev/lvm01/1         115382824  63615676  47078212  58% /mnt/lvm01.01
>
>
>So while lvm shows the lvm size to be 176.76G, df -k shows the filesystem to
>be about 115G.  What is happening with this?
>
>  
>
Probably you have to extend your filesystem. Make resize2fs 
/dev/lvm/yourvolumename.


>  
>