Linux LVM users
 help / color / mirror / Atom feed
* [linux-lvm] Converting the root filesystem to ReiserFS on LVM...
@ 2004-04-05 14:42 Madison Kelly
  2004-04-06 13:48 ` David Johnston
  2004-04-06 16:43 ` Michael Ossmann
  0 siblings, 2 replies; 5+ messages in thread
From: Madison Kelly @ 2004-04-05 14:42 UTC (permalink / raw)
  To: linux-lvm

Hi all,

   I am officially stumped... I have tried two rescue discs (SysRescCD 
and PLD Rescue) as well and my Fedora Core 1 install disk using 'linux 
rescue' in an attempt to backup the FC1 root partition so that I can 
reformat it as ReiserFS and then restore it.

   When I use the FC1 cd I can't unmount '/mnt/sysimage' which is seen 
as the LVM device '/dev/VG00/LV00', it keeps saying the device or 
resource is busy (despite being out of the directory and running off the 
CD). When I try to boot off either rescue CD 'root' isn't mounted but 
then I can't find the darn LVM partitions (and yes I made sure that the 
rescue CDs supported LVM and ReiserFS).

   Under Fedora the devices I need to mount are on:

/dev/VG00/LV00 = '/' (currently ext3)
/dev/VG00/LV01 = '/backup' (reiserfs)
/dev/VG00/LV02 = '/snapshot' (reiserfs)

   Under the two rescue CDs though there is no '/dev/VG00...'. Where 
would I find those partitions? I tried looking under '/dev/' but the 
only thing relevant I could find was '/dev/ide/host0/bus0/target0/lun0/' 
and there was no sign of the LVM partitions (nor under variants like 
'bus1', etc.).

   Any help would be greatly appreciated!

Madison

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2004-04-06 16:45 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-05 14:42 [linux-lvm] Converting the root filesystem to ReiserFS on LVM Madison Kelly
2004-04-06 13:48 ` David Johnston
2004-04-06 14:15   ` Madison Kelly
2004-04-06 16:45     ` Michael Ossmann
2004-04-06 16:43 ` Michael Ossmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox