From: <gerg@snapgear.com>
To: linux-m68k@vger.kernel.org
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH] m68k: add ColdFire FPU support for the V4e ColdFire CPU's
Date: Thu, 3 Nov 2011 15:54:05 +1000 [thread overview]
Message-ID: <1320299645-9105-2-git-send-email-gerg@snapgear.com> (raw)
In-Reply-To: <1320299645-9105-1-git-send-email-gerg@snapgear.com>
From: Greg Ungerer <gerg@uclinux.org>
The V4e ColdFire CPU family also has an integrated FPU (as well as the MMU).
So add code to support this hardware along side the existing m68k FPU code.
The ColdFire FPU is of course different to all previous 68k FP units. It is
close in operation to the 68060, but not completely compatible. The biggest
issue to deal with is that the ColdFire FPU multi-move instructions are
different. It does not support multi-moving the FP control registers, and
the multi-move of the FP data registers uses a different instruction
neumonic.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
arch/m68k/include/asm/fpu.h | 2 +
arch/m68k/kernel/process_mm.c | 57 +++++++++++----
arch/m68k/kernel/setup_mm.c | 2 +-
arch/m68k/kernel/signal_mm.c | 156 ++++++++++++++++++++++++++++-------------
4 files changed, 152 insertions(+), 65 deletions(-)
diff --git a/arch/m68k/include/asm/fpu.h b/arch/m68k/include/asm/fpu.h
index ffb6b8c..526db9d 100644
--- a/arch/m68k/include/asm/fpu.h
+++ b/arch/m68k/include/asm/fpu.h
@@ -12,6 +12,8 @@
#define FPSTATESIZE (96)
#elif defined(CONFIG_M68KFPU_EMU)
#define FPSTATESIZE (28)
+#elif defined(CONFIG_COLDFIRE) && defined(CONFIG_MMU)
+#define FPSTATESIZE (16)
#elif defined(CONFIG_M68060)
#define FPSTATESIZE (12)
#else
diff --git a/arch/m68k/kernel/process_mm.c b/arch/m68k/kernel/process_mm.c
index 58a3253..8f47724 100644
--- a/arch/m68k/kernel/process_mm.c
+++ b/arch/m68k/kernel/process_mm.c
@@ -172,9 +172,7 @@ void flush_thread(void)
current->thread.fs = __USER_DS;
if (!FPU_IS_EMU)
- asm volatile (".chip 68k/68881\n\t"
- "frestore %0@\n\t"
- ".chip 68k" : : "a" (&zero));
+ asm volatile ("frestore %0@" : : "a" (&zero));
}
/*
@@ -248,11 +246,28 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
/* Copy the current fpu state */
asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
- if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2])
- asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
- "fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
- : : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0])
- : "memory");
+ if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) {
+ if (CPU_IS_COLDFIRE) {
+ asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t"
+ "fmovel %/fpiar,%1\n\t"
+ "fmovel %/fpcr,%2\n\t"
+ "fmovel %/fpsr,%3"
+ :
+ : "m" (p->thread.fp[0]),
+ "m" (p->thread.fpcntl[0]),
+ "m" (p->thread.fpcntl[1]),
+ "m" (p->thread.fpcntl[2])
+ : "memory");
+ } else {
+ asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
+ "fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
+ :
+ : "m" (p->thread.fp[0]),
+ "m" (p->thread.fpcntl[0])
+ : "memory");
+ }
+ }
+
/* Restore the state in case the fpu was busy */
asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
}
@@ -285,12 +300,26 @@ int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
return 0;
- asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
- :: "m" (fpu->fpcntl[0])
- : "memory");
- asm volatile ("fmovemx %/fp0-%/fp7,%0"
- :: "m" (fpu->fpregs[0])
- : "memory");
+ if (CPU_IS_COLDFIRE) {
+ asm volatile ("fmovel %/fpiar,%0\n\t"
+ "fmovel %/fpcr,%1\n\t"
+ "fmovel %/fpsr,%2\n\t"
+ "fmovemd %/fp0-%/fp7,%3"
+ :
+ : "m" (fpu->fpcntl[0]),
+ "m" (fpu->fpcntl[1]),
+ "m" (fpu->fpcntl[2]),
+ "m" (fpu->fpregs[0])
+ : "memory");
+ } else {
+ asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
+ :: "m" (fpu->fpcntl[0])
+ : "memory");
+ asm volatile ("fmovemx %/fp0-%/fp7,%0"
+ :: "m" (fpu->fpregs[0])
+ : "memory");
+ }
+
return 1;
}
EXPORT_SYMBOL(dump_fpu);
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index b3938ad..d872ce4 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -236,7 +236,7 @@ void __init setup_arch(char **cmdline_p)
* with them, we should add a test to check_bugs() below] */
#ifndef CONFIG_M68KFPU_EMU_ONLY
/* clear the fpu if we have one */
- if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
+ if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|FPU_COLDFIRE)) {
volatile int zero = 0;
asm volatile ("frestore %0" : : "m" (zero));
}
diff --git a/arch/m68k/kernel/signal_mm.c b/arch/m68k/kernel/signal_mm.c
index 5f6b3d0..9a827a5 100644
--- a/arch/m68k/kernel/signal_mm.c
+++ b/arch/m68k/kernel/signal_mm.c
@@ -203,7 +203,8 @@ static inline int restore_fpu_state(struct sigcontext *sc)
if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
/* Verify the frame format. */
- if (!CPU_IS_060 && (sc->sc_fpstate[0] != fpu_version))
+ if (!(CPU_IS_060 || CPU_IS_COLDFIRE) &&
+ (sc->sc_fpstate[0] != fpu_version))
goto out;
if (CPU_IS_020_OR_030) {
if (m68k_fputype & FPU_68881 &&
@@ -222,19 +223,36 @@ static inline int restore_fpu_state(struct sigcontext *sc)
sc->sc_fpstate[3] == 0x60 ||
sc->sc_fpstate[3] == 0xe0))
goto out;
+ } else if (CPU_IS_COLDFIRE) {
+ if (!(sc->sc_fpstate[0] == 0x00 ||
+ sc->sc_fpstate[0] == 0x05 ||
+ sc->sc_fpstate[0] == 0xe5))
+ goto out;
} else
goto out;
- __asm__ volatile (".chip 68k/68881\n\t"
- "fmovemx %0,%%fp0-%%fp1\n\t"
- "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
- ".chip 68k"
- : /* no outputs */
- : "m" (*sc->sc_fpregs), "m" (*sc->sc_fpcntl));
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("fmovemd %0,%%fp0-%%fp1\n\t"
+ "fmovel %1,%%fpcr\n\t"
+ "fmovel %2,%%fpsr\n\t"
+ "fmovel %3,%%fpiar"
+ : /* no outputs */
+ : "m" (sc->sc_fpregs[0]),
+ "m" (sc->sc_fpcntl[0]),
+ "m" (sc->sc_fpcntl[1]),
+ "m" (sc->sc_fpcntl[2]));
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "fmovemx %0,%%fp0-%%fp1\n\t"
+ "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
+ ".chip 68k"
+ : /* no outputs */
+ : "m" (*sc->sc_fpregs),
+ "m" (*sc->sc_fpcntl));
+ }
}
- __asm__ volatile (".chip 68k/68881\n\t"
- "frestore %0\n\t"
- ".chip 68k" : : "m" (*sc->sc_fpstate));
+
+ __asm__ volatile ("frestore %0" : : "m" (*sc->sc_fpstate));
err = 0;
out:
@@ -249,7 +267,7 @@ out:
static inline int rt_restore_fpu_state(struct ucontext __user *uc)
{
unsigned char fpstate[FPCONTEXT_SIZE];
- int context_size = CPU_IS_060 ? 8 : 0;
+ int context_size = CPU_IS_060 ? 8 : (CPU_IS_COLDFIRE ? 12 : 0);
fpregset_t fpregs;
int err = 1;
@@ -268,10 +286,11 @@ static inline int rt_restore_fpu_state(struct ucontext __user *uc)
if (__get_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate))
goto out;
if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
- if (!CPU_IS_060)
+ if (!(CPU_IS_060 || CPU_IS_COLDFIRE))
context_size = fpstate[1];
/* Verify the frame format. */
- if (!CPU_IS_060 && (fpstate[0] != fpu_version))
+ if (!(CPU_IS_060 || CPU_IS_COLDFIRE) &&
+ (fpstate[0] != fpu_version))
goto out;
if (CPU_IS_020_OR_030) {
if (m68k_fputype & FPU_68881 &&
@@ -290,26 +309,42 @@ static inline int rt_restore_fpu_state(struct ucontext __user *uc)
fpstate[3] == 0x60 ||
fpstate[3] == 0xe0))
goto out;
+ } else if (CPU_IS_COLDFIRE) {
+ if (!(fpstate[3] == 0x00 ||
+ fpstate[3] == 0x05 ||
+ fpstate[3] == 0xe5))
+ goto out;
} else
goto out;
if (__copy_from_user(&fpregs, &uc->uc_mcontext.fpregs,
sizeof(fpregs)))
goto out;
- __asm__ volatile (".chip 68k/68881\n\t"
- "fmovemx %0,%%fp0-%%fp7\n\t"
- "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
- ".chip 68k"
- : /* no outputs */
- : "m" (*fpregs.f_fpregs),
- "m" (*fpregs.f_fpcntl));
+
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("fmovemd %0,%%fp0-%%fp7\n\t"
+ "fmovel %1,%%fpcr\n\t"
+ "fmovel %2,%%fpsr\n\t"
+ "fmovel %3,%%fpiar"
+ : /* no outputs */
+ : "m" (fpregs.f_fpregs[0]),
+ "m" (fpregs.f_fpcntl[0]),
+ "m" (fpregs.f_fpcntl[1]),
+ "m" (fpregs.f_fpcntl[2]));
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "fmovemx %0,%%fp0-%%fp7\n\t"
+ "fmoveml %1,%%fpcr/%%fpsr/%%fpiar\n\t"
+ ".chip 68k"
+ : /* no outputs */
+ : "m" (*fpregs.f_fpregs),
+ "m" (*fpregs.f_fpcntl));
+ }
}
if (context_size &&
__copy_from_user(fpstate + 4, (long __user *)&uc->uc_fpstate + 1,
context_size))
goto out;
- __asm__ volatile (".chip 68k/68881\n\t"
- "frestore %0\n\t"
- ".chip 68k" : : "m" (*fpstate));
+ __asm__ volatile ("frestore %0" : : "m" (*fpstate));
err = 0;
out:
@@ -529,10 +564,7 @@ static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs)
return;
}
- __asm__ volatile (".chip 68k/68881\n\t"
- "fsave %0\n\t"
- ".chip 68k"
- : : "m" (*sc->sc_fpstate) : "memory");
+ __asm__ volatile ("fsave %0" : : "m" (*sc->sc_fpstate) : "memory");
if (CPU_IS_060 ? sc->sc_fpstate[2] : sc->sc_fpstate[0]) {
fpu_version = sc->sc_fpstate[0];
@@ -543,21 +575,35 @@ static inline void save_fpu_state(struct sigcontext *sc, struct pt_regs *regs)
if (*(unsigned short *) sc->sc_fpstate == 0x1f38)
sc->sc_fpstate[0x38] |= 1 << 3;
}
- __asm__ volatile (".chip 68k/68881\n\t"
- "fmovemx %%fp0-%%fp1,%0\n\t"
- "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
- ".chip 68k"
- : "=m" (*sc->sc_fpregs),
- "=m" (*sc->sc_fpcntl)
- : /* no inputs */
- : "memory");
+
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("fmovemd %%fp0-%%fp1,%0\n\t"
+ "fmovel %%fpcr,%1\n\t"
+ "fmovel %%fpsr,%2\n\t"
+ "fmovel %%fpiar,%3"
+ : "=m" (sc->sc_fpregs[0]),
+ "=m" (sc->sc_fpcntl[0]),
+ "=m" (sc->sc_fpcntl[1]),
+ "=m" (sc->sc_fpcntl[2])
+ : /* no inputs */
+ : "memory");
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "fmovemx %%fp0-%%fp1,%0\n\t"
+ "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
+ ".chip 68k"
+ : "=m" (*sc->sc_fpregs),
+ "=m" (*sc->sc_fpcntl)
+ : /* no inputs */
+ : "memory");
+ }
}
}
static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *regs)
{
unsigned char fpstate[FPCONTEXT_SIZE];
- int context_size = CPU_IS_060 ? 8 : 0;
+ int context_size = CPU_IS_060 ? 8 : (CPU_IS_COLDFIRE ? 12 : 0);
int err = 0;
if (FPU_IS_EMU) {
@@ -570,15 +616,12 @@ static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *
return err;
}
- __asm__ volatile (".chip 68k/68881\n\t"
- "fsave %0\n\t"
- ".chip 68k"
- : : "m" (*fpstate) : "memory");
+ __asm__ volatile ("fsave %0" : : "m" (*fpstate) : "memory");
err |= __put_user(*(long *)fpstate, (long __user *)&uc->uc_fpstate);
if (CPU_IS_060 ? fpstate[2] : fpstate[0]) {
fpregset_t fpregs;
- if (!CPU_IS_060)
+ if (!(CPU_IS_060 || CPU_IS_COLDFIRE))
context_size = fpstate[1];
fpu_version = fpstate[0];
if (CPU_IS_020_OR_030 &&
@@ -588,14 +631,27 @@ static inline int rt_save_fpu_state(struct ucontext __user *uc, struct pt_regs *
if (*(unsigned short *) fpstate == 0x1f38)
fpstate[0x38] |= 1 << 3;
}
- __asm__ volatile (".chip 68k/68881\n\t"
- "fmovemx %%fp0-%%fp7,%0\n\t"
- "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
- ".chip 68k"
- : "=m" (*fpregs.f_fpregs),
- "=m" (*fpregs.f_fpcntl)
- : /* no inputs */
- : "memory");
+ if (CPU_IS_COLDFIRE) {
+ __asm__ volatile ("fmovemd %%fp0-%%fp7,%0\n\t"
+ "fmovel %%fpcr,%1\n\t"
+ "fmovel %%fpsr,%2\n\t"
+ "fmovel %%fpiar,%3"
+ : "=m" (fpregs.f_fpregs[0]),
+ "=m" (fpregs.f_fpcntl[0]),
+ "=m" (fpregs.f_fpcntl[1]),
+ "=m" (fpregs.f_fpcntl[2])
+ : /* no inputs */
+ : "memory");
+ } else {
+ __asm__ volatile (".chip 68k/68881\n\t"
+ "fmovemx %%fp0-%%fp7,%0\n\t"
+ "fmoveml %%fpcr/%%fpsr/%%fpiar,%1\n\t"
+ ".chip 68k"
+ : "=m" (*fpregs.f_fpregs),
+ "=m" (*fpregs.f_fpcntl)
+ : /* no inputs */
+ : "memory");
+ }
err |= copy_to_user(&uc->uc_mcontext.fpregs, &fpregs,
sizeof(fpregs));
}
@@ -693,7 +749,7 @@ static inline void push_cache (unsigned long vaddr)
".chip 68k"
: : "a" (temp));
}
- else {
+ else if (!CPU_IS_COLDFIRE) {
/*
* 68030/68020 have no writeback cache;
* still need to clear icache.
--
1.7.0.4
next prev parent reply other threads:[~2011-11-03 5:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-03 5:54 [PATCH] m68k: add ColdFire FPU support for the V4e ColdFire CPU's gerg
2011-11-03 5:54 ` gerg [this message]
2011-11-03 6:44 ` Finn Thain
2011-11-03 6:53 ` Finn Thain
2011-11-03 7:01 ` Greg Ungerer
2011-11-03 8:28 ` Geert Uytterhoeven
2011-11-04 1:16 ` Greg Ungerer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320299645-9105-2-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox