* [PATCH] m68knommu: Clean up printing of sections
@ 2012-05-31 20:23 Geert Uytterhoeven
2012-06-01 6:01 ` Greg Ungerer
0 siblings, 1 reply; 2+ messages in thread
From: Geert Uytterhoeven @ 2012-05-31 20:23 UTC (permalink / raw)
To: Greg Ungerer; +Cc: linux-m68k, uclinux-dev, Geert Uytterhoeven
- Remove casts and unneeded address-of ('&') operators,
- Use %p to format pointers, %lx to format unsigned longs.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
Not even compile tested
arch/m68k/kernel/setup_no.c | 11 ++++-------
1 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 7dc186b..8a624ec 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -218,13 +218,10 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
#endif
- pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
- "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
- (int) &_sdata, (int) &_edata,
- (int) &_sbss, (int) &_ebss);
- pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
- (int) &_ebss, (int) memory_start,
- (int) memory_start, (int) memory_end);
+ pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n",
+ _stext, _etext, _sdata, _edata, _sbss, _ebss);
+ pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ",
+ _ebss, memory_start, memory_start, memory_end);
/* Keep a copy of command line */
*cmdline_p = &command_line[0];
--
1.7.0.4
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] m68knommu: Clean up printing of sections
2012-05-31 20:23 [PATCH] m68knommu: Clean up printing of sections Geert Uytterhoeven
@ 2012-06-01 6:01 ` Greg Ungerer
0 siblings, 0 replies; 2+ messages in thread
From: Greg Ungerer @ 2012-06-01 6:01 UTC (permalink / raw)
To: Geert Uytterhoeven; +Cc: Greg Ungerer, linux-m68k, uclinux-dev
Hi Geert,
On 01/06/12 06:23, Geert Uytterhoeven wrote:
> - Remove casts and unneeded address-of ('&') operators,
> - Use %p to format pointers, %lx to format unsigned longs.
>
> Signed-off-by: Geert Uytterhoeven<geert@linux-m68k.org>
Looks good. Compile and run tested, all ok.
Acked-by: Greg Ungerer <gerg@uclinux.org>
Regards
Greg
> ---
> Not even compile tested
>
> arch/m68k/kernel/setup_no.c | 11 ++++-------
> 1 files changed, 4 insertions(+), 7 deletions(-)
>
> diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
> index 7dc186b..8a624ec 100644
> --- a/arch/m68k/kernel/setup_no.c
> +++ b/arch/m68k/kernel/setup_no.c
> @@ -218,13 +218,10 @@ void __init setup_arch(char **cmdline_p)
> printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
> #endif
>
> - pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
> - "BSS=0x%06x-0x%06x\n", (int)&_stext, (int)&_etext,
> - (int)&_sdata, (int)&_edata,
> - (int)&_sbss, (int)&_ebss);
> - pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ",
> - (int)&_ebss, (int) memory_start,
> - (int) memory_start, (int) memory_end);
> + pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n",
> + _stext, _etext, _sdata, _edata, _sbss, _ebss);
> + pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ",
> + _ebss, memory_start, memory_start, memory_end);
>
> /* Keep a copy of command line */
> *cmdline_p =&command_line[0];
--
------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: gerg@snapgear.com
SnapGear Group, McAfee PHONE: +61 7 3435 2888
8 Gardner Close FAX: +61 7 3217 5323
Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-06-01 6:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-05-31 20:23 [PATCH] m68knommu: Clean up printing of sections Geert Uytterhoeven
2012-06-01 6:01 ` Greg Ungerer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox