* [PATCH 03/10] mtd: remove the mbx860 map driver
2013-03-12 11:00 [PATCH 00/10] mtd: remove dead map drivers Artem Bityutskiy
@ 2013-03-12 11:00 ` Artem Bityutskiy
2013-03-12 11:00 ` [PATCH 04/10] pcmcia: remove Motorolla MBX860 support Artem Bityutskiy
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Artem Bityutskiy @ 2013-03-12 11:00 UTC (permalink / raw)
To: Artem Bityutskiy
Cc: Artem Bityutskiy, linux-pcmcia, Geert Uytterhoeven, linux-m68k
From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
This driver depends on CONFIG_MBX which is not defined anywhere, which means
this driver is dead.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: linux-pcmcia@lists.infradead.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
---
drivers/mtd/maps/Kconfig | 8 ----
drivers/mtd/maps/Makefile | 1 -
drivers/mtd/maps/mbx860.c | 98 ---------------------------------------------
3 files changed, 107 deletions(-)
delete mode 100644 drivers/mtd/maps/mbx860.c
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 7071486..300761f 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -294,14 +294,6 @@ config MTD_RPXLITE
to communicate with the chips on the RPXLite board. More at
<http://www.embeddedplanet.com/>.
-config MTD_MBX860
- tristate "System flash on MBX860 board"
- depends on MTD_CFI && MBX
- help
- This enables access routines for the flash chips on the Motorola
- MBX860 board. If you have one of these boards and would like
- to use the flash chips on it, say 'Y'.
-
config MTD_CFI_FLAGADM
tristate "CFI Flash device mapping on FlagaDM"
depends on 8xx && MTD_CFI
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 819e2ab..b61ea98 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o
obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o
obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o
obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o
-obj-$(CONFIG_MTD_MBX860) += mbx860.o
obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o
obj-$(CONFIG_MTD_PHYSMAP) += physmap.o
obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
diff --git a/drivers/mtd/maps/mbx860.c b/drivers/mtd/maps/mbx860.c
deleted file mode 100644
index 93fa56c..0000000
--- a/drivers/mtd/maps/mbx860.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Handle mapping of the flash on MBX860 boards
- *
- * Author: Anton Todorov
- * Copyright: (C) 2001 Emness Technology
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-
-#define WINDOW_ADDR 0xfe000000
-#define WINDOW_SIZE 0x00200000
-
-/* Flash / Partition sizing */
-#define MAX_SIZE_KiB 8192
-#define BOOT_PARTITION_SIZE_KiB 512
-#define KERNEL_PARTITION_SIZE_KiB 5632
-#define APP_PARTITION_SIZE_KiB 2048
-
-#define NUM_PARTITIONS 3
-
-/* partition_info gives details on the logical partitions that the split the
- * single flash device into. If the size if zero we use up to the end of the
- * device. */
-static struct mtd_partition partition_info[]={
- { .name = "MBX flash BOOT partition",
- .offset = 0,
- .size = BOOT_PARTITION_SIZE_KiB*1024 },
- { .name = "MBX flash DATA partition",
- .offset = BOOT_PARTITION_SIZE_KiB*1024,
- .size = (KERNEL_PARTITION_SIZE_KiB)*1024 },
- { .name = "MBX flash APPLICATION partition",
- .offset = (BOOT_PARTITION_SIZE_KiB+KERNEL_PARTITION_SIZE_KiB)*1024 }
-};
-
-
-static struct mtd_info *mymtd;
-
-struct map_info mbx_map = {
- .name = "MBX flash",
- .size = WINDOW_SIZE,
- .phys = WINDOW_ADDR,
- .bankwidth = 4,
-};
-
-static int __init init_mbx(void)
-{
- printk(KERN_NOTICE "Motorola MBX flash device: 0x%x at 0x%x\n", WINDOW_SIZE*4, WINDOW_ADDR);
- mbx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE * 4);
-
- if (!mbx_map.virt) {
- printk("Failed to ioremap\n");
- return -EIO;
- }
- simple_map_init(&mbx_map);
-
- mymtd = do_map_probe("jedec_probe", &mbx_map);
- if (mymtd) {
- mymtd->owner = THIS_MODULE;
- mtd_device_register(mymtd, NULL, 0);
- mtd_device_register(mymtd, partition_info, NUM_PARTITIONS);
- return 0;
- }
-
- iounmap((void *)mbx_map.virt);
- return -ENXIO;
-}
-
-static void __exit cleanup_mbx(void)
-{
- if (mymtd) {
- mtd_device_unregister(mymtd);
- map_destroy(mymtd);
- }
- if (mbx_map.virt) {
- iounmap((void *)mbx_map.virt);
- mbx_map.virt = 0;
- }
-}
-
-module_init(init_mbx);
-module_exit(cleanup_mbx);
-
-MODULE_AUTHOR("Anton Todorov <a.todorov@emness.com>");
-MODULE_DESCRIPTION("MTD map driver for Motorola MBX860 board");
-MODULE_LICENSE("GPL");
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 04/10] pcmcia: remove Motorolla MBX860 support
2013-03-12 11:00 [PATCH 00/10] mtd: remove dead map drivers Artem Bityutskiy
2013-03-12 11:00 ` [PATCH 03/10] mtd: remove the mbx860 map driver Artem Bityutskiy
@ 2013-03-12 11:00 ` Artem Bityutskiy
2013-03-12 11:00 ` [PATCH 05/10] mtd: maps: kill the rpxlite map driver Artem Bityutskiy
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Artem Bityutskiy @ 2013-03-12 11:00 UTC (permalink / raw)
To: Artem Bityutskiy
Cc: Artem Bityutskiy, linux-pcmcia, Geert Uytterhoeven, linux-m68k
From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
The CONFIG_MBX symbol is not defined anywhere in the kernel tree, which means
this platform is not supported by the Linux kernel and we can remove the
corresponding code from the 'm8xx_pcmcia' driver.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: linux-pcmcia@lists.infradead.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
---
drivers/pcmcia/m8xx_pcmcia.c | 59 ------------------------------------------
1 file changed, 59 deletions(-)
NOTE: this commit is independent, and I can merge it via the MTD tree with the
rest of the patches of this series. Of course, an ACK would be great to have.
And of course, if PCMCIA people wish to merge it via their tree, it is also
nice, just let me know.
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index a3a851e..9a12ead 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -419,65 +419,6 @@ static inline int voltage_set(int slot, int vcc, int vpp)
#endif
-/* ------------------------------------------------------------------------- */
-/* Motorola MBX860 */
-
-#if defined(CONFIG_MBX)
-
-#define PCMCIA_BOARD_MSG "MBX"
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
- u8 reg = 0;
-
- switch (vcc) {
- case 0:
- break;
- case 33:
- reg |= CSR2_VCC_33;
- break;
- case 50:
- reg |= CSR2_VCC_50;
- break;
- default:
- return 1;
- }
-
- switch (vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if (vcc == vpp)
- reg |= CSR2_VPP_VCC;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= CSR2_VPP_12;
- else
- return 1;
- default:
- return 1;
- }
-
- /* first, turn off all power */
- out_8((u8 *) MBX_CSR2_ADDR,
- in_8((u8 *) MBX_CSR2_ADDR) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK));
-
- /* enable new powersettings */
- out_8((u8 *) MBX_CSR2_ADDR, in_8((u8 *) MBX_CSR2_ADDR) | reg);
-
- return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
-
-#endif /* CONFIG_MBX */
-
#if defined(CONFIG_PRxK)
#include <asm/cpld.h>
extern volatile fpga_pc_regs *fpga_pc;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 05/10] mtd: maps: kill the rpxlite map driver
2013-03-12 11:00 [PATCH 00/10] mtd: remove dead map drivers Artem Bityutskiy
2013-03-12 11:00 ` [PATCH 03/10] mtd: remove the mbx860 map driver Artem Bityutskiy
2013-03-12 11:00 ` [PATCH 04/10] pcmcia: remove Motorolla MBX860 support Artem Bityutskiy
@ 2013-03-12 11:00 ` Artem Bityutskiy
2013-03-12 11:00 ` [PATCH 06/10] m68k: remove rpxlite stuff Artem Bityutskiy
2013-03-12 11:00 ` [PATCH 07/10] pcmcia: remove RPX board stuff Artem Bityutskiy
4 siblings, 0 replies; 7+ messages in thread
From: Artem Bityutskiy @ 2013-03-12 11:00 UTC (permalink / raw)
To: Artem Bityutskiy
Cc: Artem Bityutskiy, linux-pcmcia, Geert Uytterhoeven, linux-m68k
From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
This driver depends on the CONFIG_RPXCLASSIC and CONFIG_RPXLITE symbols, which
are not defined anywhere, and this means that this driver is dead.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: linux-pcmcia@lists.infradead.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
---
drivers/mtd/maps/Kconfig | 10 -------
drivers/mtd/maps/Makefile | 1 -
drivers/mtd/maps/rpxlite.c | 64 --------------------------------------------
3 files changed, 75 deletions(-)
delete mode 100644 drivers/mtd/maps/rpxlite.c
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 300761f..3fe3216 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -284,16 +284,6 @@ config MTD_TQM8XXL
code to communicate with the chips on the TQM8xxL board. More at
<http://www.denx.de/wiki/PPCEmbedded/>.
-config MTD_RPXLITE
- tristate "CFI Flash device mapped on RPX Lite or CLLF"
- depends on MTD_CFI && (RPXCLASSIC || RPXLITE)
- help
- The RPXLite PowerPC board has CFI-compliant chips mapped in
- a strange sparse mapping. This 'mapping' driver supports that
- arrangement, allowing the CFI probe and command set driver code
- to communicate with the chips on the RPXLite board. More at
- <http://www.embeddedplanet.com/>.
-
config MTD_CFI_FLAGADM
tristate "CFI Flash device mapping on FlagaDM"
depends on 8xx && MTD_CFI
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index b61ea98..8e2b289 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
obj-$(CONFIG_MTD_PISMO) += pismo.o
obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
-obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o
obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o
diff --git a/drivers/mtd/maps/rpxlite.c b/drivers/mtd/maps/rpxlite.c
deleted file mode 100644
index ed88225..0000000
--- a/drivers/mtd/maps/rpxlite.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Handle mapping of the flash on the RPX Lite and CLLF boards
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-
-
-#define WINDOW_ADDR 0xfe000000
-#define WINDOW_SIZE 0x800000
-
-static struct mtd_info *mymtd;
-
-static struct map_info rpxlite_map = {
- .name = "RPX",
- .size = WINDOW_SIZE,
- .bankwidth = 4,
- .phys = WINDOW_ADDR,
-};
-
-static int __init init_rpxlite(void)
-{
- printk(KERN_NOTICE "RPX Lite or CLLF flash device: %x at %x\n", WINDOW_SIZE*4, WINDOW_ADDR);
- rpxlite_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE * 4);
-
- if (!rpxlite_map.virt) {
- printk("Failed to ioremap\n");
- return -EIO;
- }
- simple_map_init(&rpxlite_map);
- mymtd = do_map_probe("cfi_probe", &rpxlite_map);
- if (mymtd) {
- mymtd->owner = THIS_MODULE;
- mtd_device_register(mymtd, NULL, 0);
- return 0;
- }
-
- iounmap((void *)rpxlite_map.virt);
- return -ENXIO;
-}
-
-static void __exit cleanup_rpxlite(void)
-{
- if (mymtd) {
- mtd_device_unregister(mymtd);
- map_destroy(mymtd);
- }
- if (rpxlite_map.virt) {
- iounmap((void *)rpxlite_map.virt);
- rpxlite_map.virt = 0;
- }
-}
-
-module_init(init_rpxlite);
-module_exit(cleanup_rpxlite);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Arnold Christensen <AKC@pel.dk>");
-MODULE_DESCRIPTION("MTD map driver for RPX Lite and CLLF boards");
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 06/10] m68k: remove rpxlite stuff
2013-03-12 11:00 [PATCH 00/10] mtd: remove dead map drivers Artem Bityutskiy
` (2 preceding siblings ...)
2013-03-12 11:00 ` [PATCH 05/10] mtd: maps: kill the rpxlite map driver Artem Bityutskiy
@ 2013-03-12 11:00 ` Artem Bityutskiy
2013-03-12 11:00 ` [PATCH 07/10] pcmcia: remove RPX board stuff Artem Bityutskiy
4 siblings, 0 replies; 7+ messages in thread
From: Artem Bityutskiy @ 2013-03-12 11:00 UTC (permalink / raw)
To: Artem Bityutskiy
Cc: Artem Bityutskiy, linux-pcmcia, Geert Uytterhoeven, linux-m68k
From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
The CONFIG_RPXLITE is not defined anywhere, which means that this board is not
supported anyway, and we can clean-up commproc.h a little.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: linux-pcmcia@lists.infradead.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
---
arch/m68k/include/asm/commproc.h | 17 -----------------
1 file changed, 17 deletions(-)
NOTE: this commit is independent, and I can merge it via the MTD tree with the
rest of the patches of this series. Of course, an ACK would be great to have.
And of course, if m68k people wish to merge it via their tree, it is also
nice, just let me know.
diff --git a/arch/m68k/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h
index a739985..66a36bd 100644
--- a/arch/m68k/include/asm/commproc.h
+++ b/arch/m68k/include/asm/commproc.h
@@ -480,23 +480,6 @@ typedef struct scc_enet {
#define SICR_ENET_CLKRT ((uint)0x0000003d)
#endif
-#ifdef CONFIG_RPXLITE
-/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD ((ushort)0x0004)
-#define PA_ENET_TXD ((ushort)0x0008)
-#define PA_ENET_TCLK ((ushort)0x0200)
-#define PA_ENET_RCLK ((ushort)0x0800)
-#define PB_ENET_TENA ((uint)0x00002000)
-#define PC_ENET_CLSN ((ushort)0x0040)
-#define PC_ENET_RENA ((ushort)0x0080)
-
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00003d00)
-#endif
-
#ifdef CONFIG_BSEIP
/* This ENET stuff is for the MPC823 with ethernet on SCC2.
* This is unique to the BSE ip-Engine board.
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 07/10] pcmcia: remove RPX board stuff
2013-03-12 11:00 [PATCH 00/10] mtd: remove dead map drivers Artem Bityutskiy
` (3 preceding siblings ...)
2013-03-12 11:00 ` [PATCH 06/10] m68k: remove rpxlite stuff Artem Bityutskiy
@ 2013-03-12 11:00 ` Artem Bityutskiy
4 siblings, 0 replies; 7+ messages in thread
From: Artem Bityutskiy @ 2013-03-12 11:00 UTC (permalink / raw)
To: Artem Bityutskiy
Cc: Artem Bityutskiy, linux-pcmcia, Geert Uytterhoeven, linux-m68k
From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
The RPX board is not supported by the kernel because CONFIG_RPXCLASSIC and
CONFIG_RPXLITE symbols and not defined anywhere. Clean-up the m8xx_pcmcia
driver a little bit.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: linux-pcmcia@lists.infradead.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
---
drivers/pcmcia/m8xx_pcmcia.c | 81 ------------------------------------------
1 file changed, 81 deletions(-)
NOTE: this commit is independent, and I can merge it via the MTD tree with the
rest of the patches of this series. Of course, an ACK would be great to have.
And of course, if PCMCIA people wish to merge it via their tree, it is also
nice, just let me know.
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 9a12ead..18c0d8d 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -68,12 +68,6 @@ MODULE_LICENSE("Dual MPL/GPL");
#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
-/* The RPX series use SLOT_B */
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
-#define CONFIG_PCMCIA_SLOT_B
-#define CONFIG_BD_IS_MHZ
-#endif
-
/* The ADS board use SLOT_A */
#ifdef CONFIG_ADS
#define CONFIG_PCMCIA_SLOT_A
@@ -253,81 +247,6 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev);
#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */
-/* ------------------------------------------------------------------------- */
-/* board specific stuff: */
-/* voltage_set(), hardware_enable() and hardware_disable() */
-/* ------------------------------------------------------------------------- */
-/* RPX Boards from Embedded Planet */
-
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
-
-/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
- * SYPCR is write once only, therefore must the slowest memory be faster
- * than the bus monitor or we will get a machine check due to the bus timeout.
- */
-
-#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE"
-
-#undef PCMCIA_BMT_LIMIT
-#define PCMCIA_BMT_LIMIT (6*8)
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
- u32 reg = 0;
-
- switch (vcc) {
- case 0:
- break;
- case 33:
- reg |= BCSR1_PCVCTL4;
- break;
- case 50:
- reg |= BCSR1_PCVCTL5;
- break;
- default:
- return 1;
- }
-
- switch (vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if (vcc == vpp)
- reg |= BCSR1_PCVCTL6;
- else
- return 1;
- break;
- case 120:
- reg |= BCSR1_PCVCTL7;
- default:
- return 1;
- }
-
- if (!((vcc == 50) || (vcc == 0)))
- return 1;
-
- /* first, turn off all power */
-
- out_be32(((u32 *) RPX_CSR_ADDR),
- in_be32(((u32 *) RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 |
- BCSR1_PCVCTL5 |
- BCSR1_PCVCTL6 |
- BCSR1_PCVCTL7));
-
- /* enable new powersettings */
-
- out_be32(((u32 *) RPX_CSR_ADDR), in_be32(((u32 *) RPX_CSR_ADDR)) | reg);
-
- return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
-
-#endif /* CONFIG_RPXCLASSIC */
-
/* FADS Boards from Motorola */
#if defined(CONFIG_FADS)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread