* [PATCH v2 1/2] Make USECS_PER_JIFFY available for generic use
2013-08-14 7:03 [PATCH v2 0/2] Make PPC macro spin_event_timeout() architecture independent Arpit Goel
@ 2013-08-14 7:03 ` Arpit Goel
2013-08-14 7:03 ` [PATCH v2 2/2] Convert PowerPC macro spin_event_timeout() to architecture independent macro Arpit Goel
1 sibling, 0 replies; 3+ messages in thread
From: Arpit Goel @ 2013-08-14 7:03 UTC (permalink / raw)
To: linux, takata, philb, geert
Cc: schwidefsky, heiko.carstens, linux390, davem, rob.herring, arnd,
swarren, john.stultz, jesper.nilsson, gregkh, sam,
linux-arm-kernel, linux-kernel, linux-m32r, linux-m32r-ja,
linux-m68k, linux-s390, sparclinux, mattw, timur, sboyd, akpm,
Arpit Goel
USECS_PER_JIFFY is used in several ARCHITECTURE C files.Now USECS_PER_JIFFY
has been moved from architecture specific C files to architecture specific
timex.h. This enables users to include timex.h and make use of USECS_PER_JIFFY.
Signed-off-by: Arpit Goel <B44344@freescale.com>
---
arch/arm/include/asm/timex.h | 2 ++
arch/arm/kernel/time.c | 3 ---
arch/m32r/include/asm/timex.h | 2 ++
arch/m32r/kernel/time.c | 3 ---
arch/m68k/hp300/time.c | 4 +---
arch/m68k/include/asm/timex.h | 2 ++
arch/s390/include/asm/timex.h | 2 ++
arch/s390/kernel/time.c | 2 --
arch/sparc/include/asm/timex_32.h | 2 ++
arch/sparc/include/asm/timex_64.h | 2 ++
arch/sparc/kernel/pcic.c | 1 -
include/linux/timex.h | 5 +++++
12 files changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index 83f2aa8..55a4f34 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -18,6 +18,8 @@
#include <mach/timex.h>
#endif
+/* change this if you have some constant time drift */
+#define USECS_PER_JIFFY (1000000/HZ)
typedef unsigned long cycles_t;
#define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; })
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 98aee32..7aaead4 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -38,9 +38,6 @@ DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
#endif /* pc-style 'CMOS' RTC support */
-/* change this if you have some constant time drift */
-#define USECS_PER_JIFFY (1000000/HZ)
-
#ifdef CONFIG_SMP
unsigned long profile_pc(struct pt_regs *regs)
{
diff --git a/arch/m32r/include/asm/timex.h b/arch/m32r/include/asm/timex.h
index bb9fe4f..ff8e6b1 100644
--- a/arch/m32r/include/asm/timex.h
+++ b/arch/m32r/include/asm/timex.h
@@ -9,6 +9,8 @@
#define CLOCK_TICK_RATE (CONFIG_BUS_CLOCK / CONFIG_TIMER_DIVIDE)
#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */
+/* change this if you have some constant time drift */
+#define USECS_PER_JIFFY (1000000/HZ)
#ifdef __KERNEL__
/*
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 1a15f81..0608e02 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -52,9 +52,6 @@ extern void smp_local_timer_interrupt(void);
* Change this if you have some constant time drift
*/
-/* This is for machines which generate the exact clock. */
-#define USECS_PER_JIFFY (1000000/HZ)
-
static unsigned long latch;
static u32 m32r_gettimeoffset(void)
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index 749543b..9d751d3 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -12,6 +12,7 @@
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <linux/interrupt.h>
+#include <linux/time.h>
#include <asm/machdep.h>
#include <asm/irq.h>
#include <asm/io.h>
@@ -30,9 +31,6 @@
#define CLKMSB2 0x9
#define CLKMSB3 0xD
-/* This is for machines which generate the exact clock. */
-#define USECS_PER_JIFFY (1000000/HZ)
-
#define INTVAL ((10000 / 4) - 1)
static irqreturn_t hp300_tick(int irq, void *dev_id)
diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h
index 6759dad..44f2603 100644
--- a/arch/m68k/include/asm/timex.h
+++ b/arch/m68k/include/asm/timex.h
@@ -21,6 +21,8 @@
#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
#endif
+/* change this if you have some constant time drift */
+#define USECS_PER_JIFFY (1000000/HZ)
typedef unsigned long cycles_t;
static inline cycles_t get_cycles(void)
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index 8ad8af9..91175c9 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -13,6 +13,8 @@
/* The value of the TOD clock for 1.1.1970. */
#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
+/* change this if you have some constant time drift */
+#define USECS_PER_JIFFY (1000000/HZ)
/* Inline functions for clock register access. */
static inline int set_tod_clock(__u64 time)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 876546b..eb659b6 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -49,8 +49,6 @@
#include <asm/cio.h>
#include "entry.h"
-/* change this if you have some constant time drift */
-#define USECS_PER_JIFFY ((unsigned long) 1000000/HZ)
#define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12)
u64 sched_clock_base_cc = -1; /* Force to data section. */
diff --git a/arch/sparc/include/asm/timex_32.h b/arch/sparc/include/asm/timex_32.h
index b6ccdb0..cb7f412 100644
--- a/arch/sparc/include/asm/timex_32.h
+++ b/arch/sparc/include/asm/timex_32.h
@@ -7,6 +7,8 @@
#define _ASMsparc_TIMEX_H
#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+/* change this if you have some constant time drift */
+#define USECS_PER_JIFFY (1000000/HZ)
/* XXX Maybe do something better at some point... -DaveM */
typedef unsigned long cycles_t;
diff --git a/arch/sparc/include/asm/timex_64.h b/arch/sparc/include/asm/timex_64.h
index 18b30bc..1a5738a 100644
--- a/arch/sparc/include/asm/timex_64.h
+++ b/arch/sparc/include/asm/timex_64.h
@@ -9,6 +9,8 @@
#include <asm/timer.h>
#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+/* change this if you have some constant time drift */
+#define USECS_PER_JIFFY (1000000/HZ)
/* Getting on the cycle counter on sparc64. */
typedef unsigned long cycles_t;
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 09f4fdd..2a62932 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -703,7 +703,6 @@ static void pcic_clear_clock_irq(void)
}
/* CPU frequency is 100 MHz, timer increments every 4 CPU clocks */
-#define USECS_PER_JIFFY (1000000 / HZ)
#define TICK_TIMER_LIMIT ((100 * 1000000 / 4) / HZ)
static unsigned int pcic_cycles_offset(void)
diff --git a/include/linux/timex.h b/include/linux/timex.h
index b3726e6..851dec4 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -145,4 +145,9 @@ int read_current_timer(unsigned long *timer_val);
/* The clock frequency of the i8253/i8254 PIT */
#define PIT_TICK_RATE 1193182ul
+#ifndef USECS_PER_JIFFY
+/* change this if you have some constant time drift */
+#define USECS_PER_JIFFY (1000000/HZ)
+#endif
+
#endif /* LINUX_TIMEX_H */
--
1.8.1.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2 2/2] Convert PowerPC macro spin_event_timeout() to architecture independent macro
2013-08-14 7:03 [PATCH v2 0/2] Make PPC macro spin_event_timeout() architecture independent Arpit Goel
2013-08-14 7:03 ` [PATCH v2 1/2] Make USECS_PER_JIFFY available for generic use Arpit Goel
@ 2013-08-14 7:03 ` Arpit Goel
1 sibling, 0 replies; 3+ messages in thread
From: Arpit Goel @ 2013-08-14 7:03 UTC (permalink / raw)
To: linux, takata, philb, geert
Cc: schwidefsky, heiko.carstens, linux390, davem, rob.herring, arnd,
swarren, john.stultz, jesper.nilsson, gregkh, sam,
linux-arm-kernel, linux-kernel, linux-m32r, linux-m32r-ja,
linux-m68k, linux-s390, sparclinux, mattw, timur, sboyd, akpm,
Arpit Goel
This patch ports PowerPC implementation of spin_event_timeout() for generic
use. Architecture specific implementation can be added to asm/delay.h, which
will override the generic linux implementation.
Signed-off-by: Arpit Goel <B44344@freescale.com>
---
include/linux/delay.h | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/include/linux/delay.h b/include/linux/delay.h
index a6ecb34..2ee7fa8 100644
--- a/include/linux/delay.h
+++ b/include/linux/delay.h
@@ -52,4 +52,44 @@ static inline void ssleep(unsigned int seconds)
msleep(seconds * 1000);
}
+#ifndef spin_event_timeout
+/**
+ * spin_event_timeout - spin until a condition gets true or a timeout elapses
+ * @condition: a C expression to evalate
+ * @timeout: timeout, in microseconds
+ * @delay: the number of microseconds to delay between each evaluation of
+ * @condition
+ *
+ * The process spins until the condition evaluates to true (non-zero) or the
+ * timeout elapses. The return value of this macro is the value of
+ * @condition when the loop terminates. This allows you to determine the cause
+ * of the loop terminates. If the return value is zero, then you know a
+ * timeout has occurred.
+ *
+ * This primary purpose of this macro is to poll on a hardware register
+ * until a status bit changes. The timeout ensures that the loop still
+ * terminates even if the bit never changes. The delay is for devices that
+ * need a delay in between successive reads.
+ *
+ * gcc will optimize out the if-statement if @delay is a constant.
+ *
+ * This is copied from PowerPC based spin_event_timeout() implementation
+ * and modified for generic usecase.
+ */
+#define spin_event_timeout(condition, timeout, delay) \
+({ \
+ typeof(condition) __ret; \
+ unsigned long __loops = usecs_to_jiffies(timeout); \
+ unsigned long __start = jiffies; \
+ while (!(__ret = (condition)) && \
+ time_before(jiffies, __start + __loops + 1)) \
+ if (delay) \
+ udelay(delay); \
+ else \
+ schedule(); \
+ if (!__ret) \
+ __ret = (condition); \
+ __ret; \
+})
+#endif
#endif /* defined(_LINUX_DELAY_H) */
--
1.8.1.4
^ permalink raw reply related [flat|nested] 3+ messages in thread