(unknown),

(unknown),

[postmaster]

(unknown)

[vivianofferplc013]

This is a Financial Service Announcement, we offer loan to all in need,ranging from $5000 to $800,000.00 USD. Our interest rate is 3% and our service and terms are dependable. any interested person should apply via email:lapoloanlender@gmail.com

(unknown),

[Mr Marlon Maxwell]

We offer legal loan for 3-percent,if interested provide your datas for
notification loan update:

Name:
Amount:
Address:
Monthly Income:
Duration:
Country:
Age:Sex:
Email Address:
Phone Number:

Send to EMAIL. malon.maxwell@hotellos.nl


Regards.
Mr Marlon Maxwell

(unknown),

[Grant Mayor]

FUNDING NOTIFICATION.............I am Mr Grant Mayor. i am a loan lender
as well as an angel investor, I offer funds based on demands and i use the
best possible interest rate so that it can make both paties smile. I allow
my clients to decide the loan repayment duration. So i have my door for
funding opened to all that is in need, If you have been turned down be
many financial institutions, this is a great time for you to make things
up. If you need a stress free funing, kindly get back to me with a mail of
application for funding and you will get funded within 3 working days.
Send all mails of application to: to.grantfinancing@gmail.com.

I await your response.

Grant Mayor.

(unknown),

[Mr. henry]

Van szüksége a hitel bármilyen célra? Van egy pénzügyi probléma? Nem
szükség van a pénzügyi megoldás? Mr. Henrik
 hitelek a megoldás toall a pénzügyi problémákat, mi hitelek könnyen,
olcsó, és gyors. Írjon nekünk ma, hogy a kölcsönt, amire vágytok, akkor
intézkedik minden olyan kölcsön, hogy megfeleljen a költségvetés mindössze
3%-os kamat. Ha
érdekli, lépjen velünk kapcsolatba immediately.Optional Hitel A védelem
lehetővé teszi,
hogy megfeleljen a hiteltörlesztés, ha nem tud dolgozni, betegség miatt,
baleset vagy
munkanélküliség. Csak akkor vegye ki az értékes biztosítást, ha alkalmazni
az Ön kölcsönt,
emlékszem, hogy elmondja nekünk, ha azt szeretné, hogy
henmoralendingfirm@gmail.com

* HITEL JELENTKEZÉSI LAP *

* Teljes név ............*

* Otthoni cím ....................... ..*

* Születési dátum ......................*

* Telefonszám ...................*

* MOBIL szám, ha ..............*

* HITEL szükséges mennyiség .................*

* FAX .................*

* Állampolgárság ..................*

* ORSZÁG ........................*

* SZAKMA ....................*

* SEX ..................................*

* FÉRFI .............................*

* FEMAL .........................*

* VÁLÁS HA ......................*

* Legközelebbi hozzátartozó .......................*

* NÉV .......................... ...*

* Születési dátum .....................*

* CÉLJA KÖLCSÖNZÉS .......................... .......*

* A kölcsön időtartamát ........................*

* ID .......................*

* A Üdvözlettel *


* Mr. henry *

(unknown),

[Mr. henry]

Van szüksége a hitel bármilyen célra? Van egy pénzügyi probléma? Nem
szükség van a pénzügyi megoldás? Mr. Henrik
 hitelek a megoldás toall a pénzügyi problémákat, mi hitelek könnyen,
olcsó, és gyors. Írjon nekünk ma, hogy a kölcsönt, amire vágytok, akkor
intézkedik minden olyan kölcsön, hogy megfeleljen a költségvetés mindössze
3%-os kamat. Ha
érdekli, lépjen velünk kapcsolatba immediately.Optional Hitel A védelem
lehetővé teszi,
hogy megfeleljen a hiteltörlesztés, ha nem tud dolgozni, betegség miatt,
baleset vagy
munkanélküliség. Csak akkor vegye ki az értékes biztosítást, ha alkalmazni
az Ön kölcsönt,
emlékszem, hogy elmondja nekünk, ha azt szeretné, hogy
henmoralendingfirm@gmail.com

* HITEL JELENTKEZÉSI LAP *

* Teljes név ............*

* Otthoni cím ....................... ..*

* Születési dátum ......................*

* Telefonszám ...................*

* MOBIL szám, ha ..............*

* HITEL szükséges mennyiség .................*

* FAX .................*

* Állampolgárság ..................*

* ORSZÁG ........................*

* SZAKMA ....................*

* SEX ..................................*

* FÉRFI .............................*

* FEMAL .........................*

* VÁLÁS HA ......................*

* Legközelebbi hozzátartozó .......................*

* NÉV .......................... ...*

* Születési dátum .....................*

* CÉLJA KÖLCSÖNZÉS .......................... .......*

* A kölcsön időtartamát ........................*

* ID .......................*

* A Üdvözlettel *


* Mr. henry *

(unknown)

[Geert Uytterhoeven]

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/include/asm/unistd.h       |    5 ++++-
 arch/m68k/kernel/entry.S             |    3 +++
 arch/m68knommu/kernel/syscalltable.S |    3 +++
 3 files changed, 10 insertions(+), 1 deletions(-)

diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 26d851d..f69f7ce 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -343,10 +343,13 @@
 #define __NR_fanotify_init	337
 #define __NR_fanotify_mark	338
 #define __NR_prlimit64		339
+#define __NR_name_to_handle_at	340
+#define __NR_open_by_handle_at	341
+#define __NR_clock_adjtime	342
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		340
+#define NR_syscalls		343
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 1559dea..8f9524a 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -750,4 +750,7 @@ sys_call_table:
 	.long sys_fanotify_init
 	.long sys_fanotify_mark
 	.long sys_prlimit64
+	.long sys_name_to_handle_at	/* 340 */
+	.long sys_open_by_handle_at
+	.long sys_clock_adjtime
 
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 79b1ed1..605bbbe 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -358,6 +358,9 @@ ENTRY(sys_call_table)
 	.long sys_fanotify_init
 	.long sys_fanotify_mark
 	.long sys_prlimit64
+	.long sys_name_to_handle_at	/* 340 */
+	.long sys_open_by_handle_at
+	.long sys_clock_adjtime
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
-- 
1.7.0.4

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

(unknown),

[Ntai Jerry]

My name is Mr. Jerry Ntai; I am the Head of Operations in Mevas Bank, Hong
Kong. I have a business proposal in the tune of US$25.2m to be transferred
to an offshore account with your assistance if willing. After the
successful transfer, we shall share in ratio of 30% for you and 70% for
me. Should you be interested, please respond to my letter immediately, so
we can commence all arrangements and I will give you more information on
the project and how we would handle it.

You can contact me on my private email: ( j.ntai1100@gmail.com  ) and
send me the following information for documentation purpose:


(1) Full name:
(2) Private phone number:
(3) Current residential address:
(4) Occupation:
(5) Age and Sex

I look forward to hearing from you.

Kind Regards.

(unknown),

[Mrs Mellisa Lewis.]

Contact My Lawyer For More Details,!! Barr jay mchenry for  
$14,258,000.00 tell him that i have will this money to  
you.Ref:(JJ/MMS/953/5015/GwrI/316us/uk For charity organization in  
your country.Email:(bjmfirm@fengv.com) Tel: +44703 183 9543,God Bless  
You Mrs Mellisa Lewis.

(unknown),

[Ann Adams]

Hi
  Sorry for the sudden contact with you via email, but please i have looked
  For you in the past few months now without any good result that is why i
  am using this medium, i would appreciate if you did contact me for a brief
  Discussion my Phone number is (+44) 703 595 6471 and email is michaelachambers@live.co.uk
    Thanks In Advance
    Michael Aiden
Note: All corresponding email should be sent to michaelachambers@live.co.uk  for an immediate attention.

(unknown),

[Western Union Dpt]

Dear beneficiary,
This is to re-notify you of the 300,000.00(DOLLARS)that was
deposited here in the western union office in your name is
available for pickup.

Contact us via email for your M.T.C.N Numbers.

Contact Person:Mr. Allen Williams
Email: western.unionmoney.stranfer@dgoh.org

(unknown)

[Michael Schmitz]

>From 72cce075197cce09678b28f9ee7232549e3e8b9b Mon Sep 17 00:00:00 2001
From: Michael Schmitz <schmitz@debian.org>
Date: Sat, 30 Jun 2012 15:11:16 +1200
Subject: [PATCH 1/6] [m68k] Atari: increase number of Atari interrupt sources for EtherNAT


Signed-off-by: Michael Schmitz <schmitz@debian.org>
---
 arch/m68k/include/asm/atariints.h |    6 +++++-
 arch/m68k/include/asm/irq.h       |    4 +++-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/m68k/include/asm/atariints.h b/arch/m68k/include/asm/atariints.h
index 5fc13bd..f79a381 100644
--- a/arch/m68k/include/asm/atariints.h
+++ b/arch/m68k/include/asm/atariints.h
@@ -32,7 +32,11 @@
 #define VME_SOURCE_BASE    56
 #define VME_MAX_SOURCES    16
 
-#define NUM_ATARI_SOURCES   (VME_SOURCE_BASE+VME_MAX_SOURCES-STMFP_SOURCE_BASE)
+/*
+** EtherNAT CPLD interrupts are at irq 139 (vector 0xc3) and 140
+** (vector 0xc4) so the total number is 141 now (including irq 0).
+*/
+#define NUM_ATARI_SOURCES  141
 
 /* convert vector number to int source number */
 #define IRQ_VECTOR_TO_SOURCE(v)	((v) - ((v) < 0x20 ? 0x18 : (0x40-8)))
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index c1155f0..9030877 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -11,7 +11,9 @@
 #define NR_IRQS 256
 #elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
 #define NR_IRQS 200
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+#elif defined(CONFIG_ATARI)
+#define NR_IRQS 141
+#elif defined(CONFIG_MAC)
 #define NR_IRQS 72
 #elif defined(CONFIG_Q40)
 #define NR_IRQS	43
-- 
1.7.0.4

(unknown)

[Michael Schmitz]

>From faba34dd8edb81af0b93ca4e9d5fc00f97016281 Mon Sep 17 00:00:00 2001
From: Michael Schmitz <schmitz@debian.org>
Date: Sat, 30 Jun 2012 15:16:40 +1200
Subject: [PATCH 2/6] [m68k] Atari: correct EtherNAT 91C111 interrupt, conditionalize platform device register


Signed-off-by: Michael Schmitz <schmitz@debian.org>
---
 arch/m68k/atari/config.c |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 4fc7396..2939d03 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -662,7 +662,7 @@ static void atari_get_hardware_list(struct seq_file *m)
  */
 
 #define ATARI_ETHERNAT_PHYS_ADDR	0x80000000
-#define ATARI_ETHERNAT_IRQ		0xc3
+#define ATARI_ETHERNAT_IRQ		140
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -686,16 +686,30 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-static struct platform_device *atari_platform_devices[] __initdata = {
+static struct platform_device *atari_ethernat_devices[] __initdata = {
 	&smc91x_device
 };
 
 int __init atari_platform_init(void)
 {
+	unsigned char *enatc_virt;
+	int rv = -ENODEV;
+
 	if (!MACH_IS_ATARI)
 		return -ENODEV;
 
-	return platform_add_devices(atari_platform_devices, ARRAY_SIZE(atari_platform_devices));
+#if IS_ENABLED(CONFIG_ATARI_ETHERNAT)
+	enatc_virt = (unsigned char *)ioremap(
+                                        (ATARI_ETHERNAT_PHYS_ADDR + 0x23), 2);
+	if (hwreg_present(enatc_virt)) {
+		*enatc_virt |= 0x2;	/* enable SMC91C111 interrupt */
+		rv = platform_add_devices(atari_ethernat_devices,
+					  ARRAY_SIZE(atari_ethernat_devices));
+	}
+	iounmap(enatc_virt);
+#endif
+
+	return rv;
 }
 
 arch_initcall(atari_platform_init);
-- 
1.7.0.4

(unknown)

[Michael Schmitz]

>From 49748d8106827ed5480dbca37221d5b2e0da8194 Mon Sep 17 00:00:00 2001
From: Michael Schmitz <schmitz@debian.org>
Date: Sat, 30 Jun 2012 15:19:28 +1200
Subject: [PATCH 3/6] [m68k] Atari: add machine specific register access macros in smc91x.h


Signed-off-by: Michael Schmitz <schmitz@debian.org>
---
 drivers/net/ethernet/smsc/smc91x.h |   59 ++++++++++++++++++++++++++++++++++++
 1 files changed, 59 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index f0256b3..a98ef6d 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -231,6 +231,30 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 
 #include <unit/smc91111.h>
 
+#elif defined(CONFIG_ATARI)
+
+#define SMC_CAN_USE_8BIT        1
+#define SMC_CAN_USE_16BIT       1
+#define SMC_CAN_USE_32BIT       1
+#define SMC_NOWAIT              1
+
+#define writew_be(val, addr)	out_be16((addr), (val))
+
+#define SMC_inb(a, r)           readb((a) + (r))
+#define SMC_inw(a, r)           readw((a) + (r))
+#define SMC_inl(a, r)           readl((a) + (r))
+#define SMC_outb(v, a, r)       writeb(v, (a) + (r))
+#define SMC_outw(v, a, r)       writew(v, (a) + (r))
+#define SMC_outw_be(v, a, r)    writew_be(v, (a) + (r))
+#define SMC_outl(v, a, r)       writel(v, (a) + (r))
+#define SMC_insw(a, r, p, l)    readsw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l)   writesw((a) + (r), p, l)
+#define SMC_insl(a, r, p, l)    readsl((a) + (r), p, l)
+#define SMC_outsl(a, r, p, l)   writesl((a) + (r), p, l)
+
+#define RPC_LSA_DEFAULT         RPC_LED_100_10
+#define RPC_LSB_DEFAULT         RPC_LED_TX_RX
+
 #elif defined(CONFIG_ARCH_MSM)
 
 #define SMC_CAN_USE_8BIT	0
@@ -1116,6 +1140,40 @@ static const char * chip_ids[ 16 ] =  {
 		}							\
 	} while (0)
 
+#if defined(CONFIG_ATARI)
+/*
+ * MSch: EtherNAT is 32 bit, so the misaligned data buffer hack applies.
+ * This appears to hurt quite a lot ... we actually need to byte swap the
+ * misaligned write because the data end up in the packet buffer swapped
+ * otherwise (resulting in the first two bytes of the target MAC address
+ * being swapped)
+ */
+#define SMC_PUSH_DATA(lp, p, l)					\
+	do {								\
+		if (SMC_32BIT(lp)) {				\
+			void *__ptr = (p);				\
+			int __len = (l);				\
+			void __iomem *__ioaddr = ioaddr;		\
+			if (__len >= 2 && (unsigned long)__ptr & 2) {	\
+				__len -= 2;				\
+				SMC_outw_be(*(u16 *)__ptr, ioaddr,	\
+					DATA_REG(lp));		\
+				__ptr += 2;				\
+			}						\
+			if (SMC_CAN_USE_DATACS && lp->datacs)		\
+				__ioaddr = lp->datacs;			\
+			SMC_outsl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \
+			if (__len & 2) {				\
+				__ptr += (__len & ~3);			\
+				SMC_outw_be(*((u16 *)__ptr), ioaddr,	\
+					 DATA_REG(lp));		\
+			}						\
+		} else if (SMC_16BIT(lp))				\
+			SMC_outsw(ioaddr, DATA_REG(lp), (u16 *) p, (l) >> 1); \
+		else if (SMC_8BIT(lp))				\
+			SMC_outsb(ioaddr, DATA_REG(lp), p, l);	\
+	} while (0)
+#else
 #define SMC_PUSH_DATA(lp, p, l)					\
 	do {								\
 		if (SMC_32BIT(lp)) {				\
@@ -1141,6 +1199,7 @@ static const char * chip_ids[ 16 ] =  {
 		else if (SMC_8BIT(lp))				\
 			SMC_outsb(ioaddr, DATA_REG(lp), p, l);	\
 	} while (0)
+#endif
 
 #define SMC_PULL_DATA(lp, p, l)					\
 	do {								\
-- 
1.7.0.4

(unknown)

[Michael Schmitz]

>From 1fe03815ff360ebec29fe6d66b5a1d8659e3a95d Mon Sep 17 00:00:00 2001
From: Michael Schmitz <schmitz@debian.org>
Date: Sat, 30 Jun 2012 15:22:13 +1200
Subject: [PATCH 4/6] [m68k] Atari: add Kconfig support for EtherNAT - smc91x.c driver


Signed-off-by: Michael Schmitz <schmitz@debian.org>
---
 arch/m68k/Kconfig.devices         |   10 ++++++++++
 drivers/net/ethernet/smsc/Kconfig |    2 +-
 2 files changed, 11 insertions(+), 1 deletions(-)

diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index 04a3d9b..eefd271 100644
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -55,6 +55,16 @@ config NFETH
 	  which will emulate a regular ethernet device while presenting an
 	  ethertap device to the host system.
 
+config ATARI_ETHERNAT
+	bool "Atari EtherNAT Ethernet support"
+	depends on ATARI
+	---help---
+	  Say Y to include support for the EtherNAT network adapter for the
+	  CT/60 extension port.
+
+	  To compile the actual ethernet driver, choose Y or M for the SMC91X
+	  option in the network device section; the module will be called smc91x.
+
 endmenu
 
 menu "Character devices"
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index bb1e8f3..d3485cf 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -40,7 +40,7 @@ config SMC91X
 	select NET_CORE
 	select MII
 	depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \
-		    MN10300 || COLDFIRE)
+		    MN10300 || COLDFIRE || ATARI_ETHERNAT)
 	---help---
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
-- 
1.7.0.4

(unknown)

[Michael Schmitz]

>From 48d2284d03e6b254207b03765b9f636d8126c857 Mon Sep 17 00:00:00 2001
From: Michael Schmitz <schmitz@debian.org>
Date: Sat, 30 Jun 2012 15:25:59 +1200
Subject: [PATCH 5/6] [m68k] Atari: add platform support for EtherNEC - ne.c driver


Signed-off-by: Michael Schmitz <schmitz@debian.org>
---
 arch/m68k/atari/config.c |   68 ++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 66 insertions(+), 2 deletions(-)

diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 2939d03..3e32665 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -690,10 +690,48 @@ static struct platform_device *atari_ethernat_devices[] __initdata = {
 	&smc91x_device
 };
 
+#if IS_ENABLED(CONFIG_ATARI_ETHERNEC)
+
+#define ATARI_ETHERNEC_PHYS_ADDR	0xfffa0000
+#define ATARI_ETHERNEC_BASE		0x300
+#define ATARI_ETHERNEC_IRQ		IRQ_MFP_TIMD
+
+static struct resource rtl8019_resources[] = {
+	[0] = {
+		.name	= "rtl9019-regs",
+		.start	= ATARI_ETHERNEC_BASE,
+		.end	= ATARI_ETHERNEC_BASE + 0x20 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.name	= "rtl9019-irq",
+		.start	= ATARI_ETHERNEC_IRQ,
+		.end	= ATARI_ETHERNEC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtl8019_device = {
+	.name		= "ne",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtl8019_resources),
+	.resource	= rtl8019_resources,
+};
+
+static struct platform_device *atari_ethernec_devices[] __initdata = {
+	&rtl8019_device
+};
+
+irqreturn_t atari_timerd_interrupt(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+#endif
+
 int __init atari_platform_init(void)
 {
-	unsigned char *enatc_virt;
-	int rv = -ENODEV;
+	unsigned char *enatc_virt, *enec_virt;
+	int rv = -ENODEV, rv2 = -ENODEV;
 
 	if (!MACH_IS_ATARI)
 		return -ENODEV;
@@ -709,6 +747,32 @@ int __init atari_platform_init(void)
 	iounmap(enatc_virt);
 #endif
 
+#if IS_ENABLED(CONFIG_ATARI_ETHERNEC)
+	enec_virt = (unsigned char *)ioremap((ATARI_ETHERNEC_PHYS_ADDR), 0xf);
+	if (hwreg_present(enec_virt)) {
+		int ret;
+		const char *name = "Timer D dummy interrupt";
+
+		/* timer routine set up in atari_ethernec_probe() */
+		/* set Timer D data Register */
+		st_mfp.tim_dt_d = 123;	/* 200 Hz */
+		/* start timer D, div = 1:100 */
+		st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 0xf0) | 0x6;
+		/* Must make this shared in case other timer ints are needed */
+		ret = request_irq(IRQ_MFP_TIMD, atari_timerd_interrupt,
+				  IRQF_SHARED, name, atari_timerd_interrupt);
+		if (ret)
+			pr_err("atari_platform_init: failed to register timer for EtherNEC!\n");
+
+		rv2 = platform_add_devices(atari_ethernec_devices,
+					   ARRAY_SIZE(atari_ethernec_devices));
+	}
+	iounmap(enec_virt);
+#endif
+
+	if (rv2)
+		return rv2;
+
 	return rv;
 }
 
-- 
1.7.0.4

(unknown),

[Johnson Helen]

receive a grant sponsorship  of $ 2,500,000 USD For details of this free E-Lotto and  directives on processing your funds with your claims identification # - G20-9012-747; EU-162-0234, Contact The regional verification and claims office:

Qatar Claims Official: Mohammad Fathy (Mr.)
Email: qataronlinedonation@qatar.io
Direct Lines:  +447035941132

Courtesy,
QATAR FOUNDATION: FUNDS FOR INTERNATIONAL DEVELOPMENT
www.qf.org.qa

(unknown),

[Michael Schmitz]

Hello Geert,


This series of patches updates Atari EtherNAT and EtherNEC network support, 
plus adds USB driver support for the ISP1160 chip found on EtherNAT and 
NetUSBee adapters.

It is meant to apply on top of your m68k-queue or master branches. Expect a 
merge conflict in #4 (the EtherNAT base address has been moved to atarihw.h
as per your feedback). I can provide the necessary patch on top of the 'Initial 
EtherNAT support' patch from your queue that would avoid the conflict. 

Network stuff:
01/14 m68k/atari EtherNEC: remove original EtherNEC driver
02/14 m68k/atari EtherNAT: remove original EtherNAT driver
03/14 m68k/atari: use CONFIG_ATARI in smc91x.h
04/14 m68k/atari: EtherNAT - change number of Atari interrupt sources
05/14 m68k/irq: add handle_polled_irq() for timer based soft interrupts
06/14 m68k/atari: use dedicated irq_chip for timer D interrupts
07/14 m68k/atari: EtherNEC - add platform device support
08/14 m68k/atari: EtherNAT - ethernet support - new driver (smc91x)
09/14 m68k/atari: EtherNEC - ethernet support - new driver (ne.c)
10/14 m68k/atari: EtherNAT - add interrupt chip for Ethernet and USB interrupts

USB related:
11/14 m68k/atari: Implement 16 bit access macros for ROM port
12/14 m68k: Implement ndelay() based on the existing udelay() logic
13/14 m68k/atari: USB - add platform device definitions for ISP1160 HCD
14/14 m68k/atari: USB - Add ISP1160 USB host controller support

You may well decide to leave out #5 - use of EtherNEC and NetUSBee is then possible
only with the 'noirqdebug' kernel option.

Many thanks to David Galvez for setting me straight on register locations, ways to deal
with the USB fifo transfers and testing/fixing the code for the NetUSBee case. I have
departed from the code David used to switch between NetUSBee and EtherNAT access, but
only slighlty. Please test this version and yell if it's not doing the right thing, David.

With the present code, the timer D interrupt frequency is approximately 100 Hz. On fast
hardware, it should probably be doubled (change the timer D counter value fron 254 to 123
to achieve that. I had the timer rate adjustable via kernel options in an earlier
incarnation pf the ethernet drivers. Or make it a function of the processor clock rate 
- whoever feels like it can revive that bit please).

Thorsten: I will shortly send another patch series against upstream linus-3.9-rc2. 
That one may be easier to integrate into Debian kernel sources. 

Cheers,

	Michael

(unknown),

[Western Union Office ©]

Congratulation !! Confirm your 500,000,00 Euros. Contact claims office via : claimsoffice13@yeah.net

(unknown),

[Diane_P_Cleland/FSU%FERRIS]

Your email as been awarded sum of 500,000.00 GBP as charity Compensation from Qatar Foundation,contact(
morgananderson11@sbcglobal.net)

(unknown),

[Michael Schmitz]

new version of the patch adding Atari EtherNEC (IRQ-less ROM port ISA NE2k
adapter) support to ne.c, as announced before.

Thanks,

	Michael Schmitz

>From 224ce049f71577d6ec380aeb94a4d25c3c4016a7 Mon Sep 17 00:00:00 2001
From: Michael Schmitz <schmitzmic@gmail.com>
Date: Sat, 6 Apr 2013 13:26:42 +1300
Subject: [PATCH] m68k/atari: EtherNEC - ethernet support (ne)

Support for Atari EtherNEC ROM port adapters in ne.c

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/net/ethernet/8390/Kconfig |    3 ++-
 drivers/net/ethernet/8390/ne.c    |    2 ++
 2 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index 0988811..2d89bd0 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -91,7 +91,8 @@ config MCF8390
 
 config NE2000
 	tristate "NE2000/NE1000 support"
-	depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX)
+	depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \
+		    ATARI_ETHERNEC)
 	select CRC32
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read
diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
index 58eaa8f..de566fb 100644
--- a/drivers/net/ethernet/8390/ne.c
+++ b/drivers/net/ethernet/8390/ne.c
@@ -169,6 +169,8 @@ bad_clone_list[] __initdata = {
 #elif defined(CONFIG_PLAT_OAKS32R)  || \
    defined(CONFIG_MACH_TX49XX)
 #  define DCR_VAL 0x48		/* 8-bit mode */
+#elif defined(CONFIG_ATARI)	/* 8-bit mode on Atari, normal on Q40 */
+#  define DCR_VAL (MACH_IS_ATARI ? 0x48 : 0x49)
 #else
 #  define DCR_VAL 0x49
 #endif
-- 
1.7.0.4

Re: [PATCH] m68k/atari: EtherNEC - ethernet support (ne),>

[Paul Gortmaker]

[Subject added from patch]

On 14-08-09 10:02 PM, Michael Schmitz wrote:
> new version of the patch adding Atari EtherNEC (IRQ-less ROM port ISA NE2k
> adapter) support to ne.c, as announced before.
> 
> Thanks,
> 
> 	Michael Schmitz

Please don't send subjectless mails by attaching a commit to a mail,
just use git send-email directly.

> 
> From 224ce049f71577d6ec380aeb94a4d25c3c4016a7 Mon Sep 17 00:00:00 2001
> From: Michael Schmitz <schmitzmic@gmail.com>
> Date: Sat, 6 Apr 2013 13:26:42 +1300
> Subject: [PATCH] m68k/atari: EtherNEC - ethernet support (ne)
> 
> Support for Atari EtherNEC ROM port adapters in ne.c

Is that all there is to say about these?  Nothing about which platforms
might have it, or what it was tested on or ... ?

> 
> Signed-off-by: Michael Schmitz <schmitz@debian.org>
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> ---
>  drivers/net/ethernet/8390/Kconfig |    3 ++-
>  drivers/net/ethernet/8390/ne.c    |    2 ++
>  2 files changed, 4 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
> index 0988811..2d89bd0 100644
> --- a/drivers/net/ethernet/8390/Kconfig
> +++ b/drivers/net/ethernet/8390/Kconfig
> @@ -91,7 +91,8 @@ config MCF8390
>  
>  config NE2000
>  	tristate "NE2000/NE1000 support"
> -	depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX)
> +	depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \
> +		    ATARI_ETHERNEC)
>  	select CRC32
>  	---help---
>  	  If you have a network (Ethernet) card of this type, say Y and read
> diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
> index 58eaa8f..de566fb 100644
> --- a/drivers/net/ethernet/8390/ne.c
> +++ b/drivers/net/ethernet/8390/ne.c
> @@ -169,6 +169,8 @@ bad_clone_list[] __initdata = {
>  #elif defined(CONFIG_PLAT_OAKS32R)  || \
>     defined(CONFIG_MACH_TX49XX)
>  #  define DCR_VAL 0x48		/* 8-bit mode */
> +#elif defined(CONFIG_ATARI)	/* 8-bit mode on Atari, normal on Q40 */
> +#  define DCR_VAL (MACH_IS_ATARI ? 0x48 : 0x49)

This doesn't make sense.  Is not MACH_IS_ATARI set when CONFIG_ATARI
is set?  And even if it isn't then just set 48 for MACH_IS_ATARI and
let the default of 49 below take the ATARI=y and IS_ATARI=n case,
without the need for the ?: operator at all.  On top of that, why
aren't you using the ATARI_ETHERNEC option here for your 48 trigger,
instead of the much higher arch/mach level triggers at all?

P.
--

>  #else
>  #  define DCR_VAL 0x49
>  #endif
> 

Re: [PATCH] m68k/atari: EtherNEC - ethernet support (ne),>

[Geert Uytterhoeven]

Hi Paul,

On Tue, Aug 12, 2014 at 4:55 PM, Paul Gortmaker
<paul.gortmaker@windriver.com> wrote:
>> @@ -169,6 +169,8 @@ bad_clone_list[] __initdata = {
>>  #elif defined(CONFIG_PLAT_OAKS32R)  || \
>>     defined(CONFIG_MACH_TX49XX)
>>  #  define DCR_VAL 0x48               /* 8-bit mode */
>> +#elif defined(CONFIG_ATARI)  /* 8-bit mode on Atari, normal on Q40 */
>> +#  define DCR_VAL (MACH_IS_ATARI ? 0x48 : 0x49)
>
> This doesn't make sense.  Is not MACH_IS_ATARI set when CONFIG_ATARI
> is set?  And even if it isn't then just set 48 for MACH_IS_ATARI and

m68k kernels can be multi-platform, so we need the MACH_IS_ATARI()
runtime check.

> let the default of 49 below take the ATARI=y and IS_ATARI=n case,
> without the need for the ?: operator at all.  On top of that, why
> aren't you using the ATARI_ETHERNEC option here for your 48 trigger,
> instead of the much higher arch/mach level triggers at all?

CONFIG_ATARI_ETHERNEC could be used instead of CONFIG_ATARI,
but as ne.c is used on Atari with Ethernec only, it doesn't matter much.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH] m68k/atari: EtherNEC - ethernet support (ne),>

[Michael Schmitz]

Hi Paul,

On Wed, Aug 13, 2014 at 2:55 AM, Paul Gortmaker
<paul.gortmaker@windriver.com> wrote:
> [Subject added from patch]

Thanks - that was me botching git-send-email --annotate. My sincere
apology for this.

>> From 224ce049f71577d6ec380aeb94a4d25c3c4016a7 Mon Sep 17 00:00:00 2001
>> From: Michael Schmitz <schmitzmic@gmail.com>
>> Date: Sat, 6 Apr 2013 13:26:42 +1300
>> Subject: [PATCH] m68k/atari: EtherNEC - ethernet support (ne)
>>
>> Support for Atari EtherNEC ROM port adapters in ne.c
>
> Is that all there is to say about these?  Nothing about which platforms
> might have it, or what it was tested on or ... ?

All Atari computers have the ROM port. As such, the driver could be
used on MegaST/E, TT or Falcon variants (these having MMU support so
can run m68k linux).

The ne.c driver is also used on the Q40, a m68k platfrem which
includes the ISA bus. Hence the runtime check for whether the driver
runs on Atari, or some other m68k platform below.

>
>>
>> Signed-off-by: Michael Schmitz <schmitz@debian.org>
>> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
>> ---
>>  drivers/net/ethernet/8390/Kconfig |    3 ++-
>>  drivers/net/ethernet/8390/ne.c    |    2 ++
>>  2 files changed, 4 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
>> index 0988811..2d89bd0 100644
>> --- a/drivers/net/ethernet/8390/Kconfig
>> +++ b/drivers/net/ethernet/8390/Kconfig
>> @@ -91,7 +91,8 @@ config MCF8390
>>
>>  config NE2000
>>       tristate "NE2000/NE1000 support"
>> -     depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX)
>> +     depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \
>> +                 ATARI_ETHERNEC)
>>       select CRC32
>>       ---help---
>>         If you have a network (Ethernet) card of this type, say Y and read
>> diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
>> index 58eaa8f..de566fb 100644
>> --- a/drivers/net/ethernet/8390/ne.c
>> +++ b/drivers/net/ethernet/8390/ne.c
>> @@ -169,6 +169,8 @@ bad_clone_list[] __initdata = {
>>  #elif defined(CONFIG_PLAT_OAKS32R)  || \
>>     defined(CONFIG_MACH_TX49XX)
>>  #  define DCR_VAL 0x48               /* 8-bit mode */
>> +#elif defined(CONFIG_ATARI)  /* 8-bit mode on Atari, normal on Q40 */
>> +#  define DCR_VAL (MACH_IS_ATARI ? 0x48 : 0x49)
>
> This doesn't make sense.  Is not MACH_IS_ATARI set when CONFIG_ATARI

As Geert pointed out, MACH_IS_ATARI is a runtime test on multiplatform
kernels (which are the norm these days, even with m68k).

Would you be OK if I expanded the comment like this?

/* ne.c is used on m68k Atari and Q40 computers - the Atari ROM-port
adapter is 8-bit, Q40 uses ISA */

> is set?  And even if it isn't then just set 48 for MACH_IS_ATARI and
> let the default of 49 below take the ATARI=y and IS_ATARI=n case,
> without the need for the ?: operator at all.  On top of that, why

This would limit the runtime test to the case where it is actually
needed (untested):

#elif defined(CONFIG_ATARI) && defined(CONFIG_Q40)
/* multiplatform m68k kernel - the Atari ROM-port adapter is 8-bit,
Q40 uses ISA */
#  define DCR_VAL (MACH_IS_ATARI ? 0x48 : 0x49)
#elif defined(CONFIG_ATARI) /* no Q40 support - 8-bit mode on Atari ROM port */
#  define DCR_VAL 0x48
#else
#  define DCR_VAL 0x49
#endif

Are there any other m68k platforms that use the ne.c driver, Geert?
apne, hydra and zorro8390 all have their own separate drivers - any
others?

> aren't you using the ATARI_ETHERNEC option here for your 48 trigger,
> instead of the much higher arch/mach level triggers at all?

Fair enough - I can do that. I though using the mach level one made it
clearer this is about multiplatform issues.

We still need the runtime test on kernels configured for both Atari
and Q40 though. Which variant do you prefer?

Thanks,

  Michael


>
> P.
> --
>
>>  #else
>>  #  define DCR_VAL 0x49
>>  #endif
>>

Re: [PATCH] m68k/atari: EtherNEC - ethernet support (ne),>

[Geert Uytterhoeven]

Hi Michael,

On Tue, Aug 12, 2014 at 11:40 PM, Michael Schmitz <schmitzmic@gmail.com> wrote:
> Would you be OK if I expanded the comment like this?
>
> /* ne.c is used on m68k Atari and Q40 computers - the Atari ROM-port
> adapter is 8-bit, Q40 uses ISA */

DaveM already applied it to his tree, and sent a pull request to Linus.

> This would limit the runtime test to the case where it is actually
> needed (untested):
>
> #elif defined(CONFIG_ATARI) && defined(CONFIG_Q40)
> /* multiplatform m68k kernel - the Atari ROM-port adapter is 8-bit,
> Q40 uses ISA */
> #  define DCR_VAL (MACH_IS_ATARI ? 0x48 : 0x49)
> #elif defined(CONFIG_ATARI) /* no Q40 support - 8-bit mode on Atari ROM port */
> #  define DCR_VAL 0x48
> #else
> #  define DCR_VAL 0x49
> #endif

MACH_IS_ATARI already evaluates to a constant on single-platform
kernels, so this is optimized at compile time.
Hence there's not really a need for this.

> Are there any other m68k platforms that use the ne.c driver, Geert?
> apne, hydra and zorro8390 all have their own separate drivers - any
> others?

Not that I'm aware of. Only Q40 has CONFIG_NE2000 in defconfig.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH] m68k/atari: EtherNEC - ethernet support (ne),>

[Michael Schmitz]

Hi Geert,

>
>> Would you be OK if I expanded the comment like this?
>>
>> /* ne.c is used on m68k Atari and Q40 computers - the Atari ROM-port
>> adapter is 8-bit, Q40 uses ISA */
>>     
>
> DaveM already applied it to his tree, and sent a pull request to Linus.
>   

OK - won't resend then unless explicitly requested.

Many thanks, Dave!

>> This would limit the runtime test to the case where it is actually
>> needed (untested):
>>
>> #elif defined(CONFIG_ATARI) && defined(CONFIG_Q40)
>> /* multiplatform m68k kernel - the Atari ROM-port adapter is 8-bit,
>> Q40 uses ISA */
>> #  define DCR_VAL (MACH_IS_ATARI ? 0x48 : 0x49)
>> #elif defined(CONFIG_ATARI) /* no Q40 support - 8-bit mode on Atari ROM port */
>> #  define DCR_VAL 0x48
>> #else
>> #  define DCR_VAL 0x49
>> #endif
>>     
>
> MACH_IS_ATARI already evaluates to a constant on single-platform
> kernels, so this is optimized at compile time.
> Hence there's not really a need for this.
>   

I was hoping it would. More of an attempt to make the logic easier to 
understand, but a comment would be sufficient (and avoid redundancy).

>> Are there any other m68k platforms that use the ne.c driver, Geert?
>> apne, hydra and zorro8390 all have their own separate drivers - any
>> others?
>>     
>
> Not that I'm aware of. Only Q40 has CONFIG_NE2000 in defconfig.
>   

Good - we can finally put this one to rest.

Cheers,

    Michael


> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
>   

(unknown)

[MRS GRACE MANDA]

[-- Attachment #1: Type: text/plain, Size: 71 bytes --]









This is Mrs Grace Manda (  Please I need your Help is Urgent). 

[-- Attachment #2: Mrs Grace Manda.rtf --]
[-- Type: application/rtf, Size: 35796 bytes --]

(unknown),

[White, Marlys L]

hallo,
Ich bin Mr.Morgan Ich habe eine sensible und vertrauliche
Geschäfts wert 12 Millionen Pfund, die wir nutzen die uns beide ich will auf meiner privaten E-Mail geben die details.contact mich (morganan192@hotmail.com)--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

(unknown),

[pepa6.es]

Proposal,

Respond to my personal email;  mrs.zhangxiao1962@outlook.
com 


Yours Sincerely.
Mrs. Zhang Xiao (Accounts book Keeper)
Angang 
Steel Company Limited
396 Nan Zhong Hua Lu, Tie Dong District Anshan, 
Liaoning 114021, China.

(unknown),

[Sasnett_Karen]

Haben Sie einen Investor brauchen?

Haben Sie geschäftliche oder persönliche Darlehen benötigen?

Wir geben Darlehen an eine natürliche Person und Unternehmen bei 3% Zinsen jährlich. Weitere Informationen Kontaktieren Sie uns per E-Mail: omfcreditspa@hotmail.com<mailto:omfcreditspa@hotmail.com>



HINWEIS: Leiten Sie Ihre Antwort nur an diese E-Mail: omfcreditspa@hotmail.com<mailto:omfcreditspa@hotmail.com>

(unknown),

[jerryfunds9]

We Give Out Loans For 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans, Email Us At j.funds2000000@inbox.lv  With Amount Needed And Phone Number.

(unknown),

[jerryfunds24]

We Give Out Loans For 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans, Email Us At j.funds2000000@inbox.lv  With Amount Needed And Phone Number.

(unknown),

[jerryfunds21]

We Give Out Loans For 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans, Email Us At jerrysmith@inbox.lv  With Amount Needed And Phone Number.

(unknown),

[jerryfunds]

We Give Out Loans For 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans, Email Us At jerrysmith@inbox.lv  With Amount Needed And Phone Number.

(unknown)

[David Howells]

Nicolas Dichtel <nicolas.dichtel@6wind.com> wrote:

> This header file is exported, thus move it to uapi.

Exported how?

> +#ifdef __INT32_TYPE__
> +#undef __INT32_TYPE__
> +#define __INT32_TYPE__		int
> +#endif
> +
> +#ifdef __UINT32_TYPE__
> +#undef __UINT32_TYPE__
> +#define __UINT32_TYPE__	unsigned int
> +#endif
> +
> +#ifdef __UINTPTR_TYPE__
> +#undef __UINTPTR_TYPE__
> +#define __UINTPTR_TYPE__	unsigned long
> +#endif

These weren't defined by the kernel before, so why do we need to define them
now?

Will defining __UINTPTR_TYPE__ cause problems in compiling libboost by
changing the signature on C++ functions that use uintptr_t?

David

(unknown),

[armouralumni]

[-- Attachment #1: EMAIL_06644_linux-m68k.zip --]
[-- Type: application/zip, Size: 2992 bytes --]

(unknown),

[Gideon Israel Dsouza]

Folks,

I apologize for the goof ups. I know accepting newbie patches must be
annoying. If it's any consolation I'm trying hard to learn the ropes
with a simple patches so I can contribute more substantial stuff
later. 

Thanks,
Gideon

(unknown),

[zem.uchastok]

[-- Attachment #1: 5750824004942_linux-m68k.zip --]
[-- Type: application/zip, Size: 3609 bytes --]

(unknown),

[zem.uchastok]

[-- Attachment #1: EMAIL_28903012528_linux-m68k.zip --]
[-- Type: application/zip, Size: 2019 bytes --]

(unknown),

[Mr.Jerry Smith]

We Give Out Loans At 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans Or Business Loan, Email Us At jerryfunds11@inbox.lv  With Amount Needed And Phone Number.

(unknown),

[armouralumni]

[-- Attachment #1: 382518.zip --]
[-- Type: application/zip, Size: 3175 bytes --]

(unknown),

[armouralumni]

[-- Attachment #1: 5980832698.zip --]
[-- Type: application/zip, Size: 3204 bytes --]

(unknown),

[From Lori J. Robinson]

Hello,

I am General Lori J. Robinson, I am presently in Afghanistan serving
the UN/NATO military assignment here,i have an important discussion
with you  kindly respond to me through my private  box
lori_robinson.usa@hotmail.com  so that we can know ourselves better. I
hope to read from you if your are also interested. Thanks and hoping
to hear from you soonest.

(unknown),

[armouralumni]

[-- Attachment #1: 735758270.zip --]
[-- Type: application/zip, Size: 3186 bytes --]

(unknown),

[armouralumni]

[-- Attachment #1: 04319.zip --]
[-- Type: application/zip, Size: 5142 bytes --]

(unknown),

[armouralumni]

[-- Attachment #1: EMAIL_82952679061_linux-m68k.zip --]
[-- Type: application/zip, Size: 3482 bytes --]

(unknown),

[armouralumni]

[-- Attachment #1: EMAIL_6686834979628_linux-m68k.zip --]
[-- Type: application/zip, Size: 3172 bytes --]

(unknown),

[armouralumni]

[-- Attachment #1: 75316601415907.zip --]
[-- Type: application/zip, Size: 2755 bytes --]

(unknown),

[armouralumni]

[-- Attachment #1: EMAIL_11449160770431_linux-m68k.zip --]
[-- Type: application/zip, Size: 5047 bytes --]

(unknown),

[armouralumni]

[-- Attachment #1: "EMAIL_577214953915613_linux-m68k.zip --]
[-- Type: application/zip, Size: 190 bytes --]

(unknown),

[daven bango]

Hi, I am Barrister Daven Bango, Can i trust and cooperate with you in an
international transaction? I look forward to your urgent response in my
email (bar.davenbango@gmail.com) Thanks.

Best regards,
Barrister Daven Bango
skype: bardaven01

(unknown),

[pekka.enne]

[-- Attachment #1: 50948.zip --]
[-- Type: application/zip, Size: 7245 bytes --]

(unknown),

[pekka.enne]

[-- Attachment #1: 3575697248.zip --]
[-- Type: application/zip, Size: 2799 bytes --]

(unknown),

[armouralumni]

[-- Attachment #1: 423180199556284.zip --]
[-- Type: application/zip, Size: 2803 bytes --]

(unknown),

[Ella Golan]

I am Ms.Ella Golan, I am the Executive Vice President Banking Division with
FIRST INTERNATIONAL BANK OF ISRAEL LTD (FIBI).
I am getting in touch with you regarding an extremely important and urgent
matter. If you would oblige me the opportunity, I shall provide you with
details upon your Response...

Faithfully,
Ms.Ella Golan

(unknown),

[pekka.enne]

[-- Attachment #1: 01587514.zip --]
[-- Type: application/zip, Size: 2839 bytes --]

(unknown),

[armouralumni]

[-- Attachment #1: 21687962919146.zip --]
[-- Type: application/zip, Size: 43589 bytes --]

(unknown),

[EG]

I am Ms.Ella Golan, I am the Executive Vice President Banking Division with
FIRST INTERNATIONAL BANK OF ISRAEL LTD (FIBI).
I am getting in touch with you regarding an extremely important and urgent
matter. If you would oblige me the opportunity, I shall provide you with
details upon your response.

Faithfully,
Ms.Ella Golan