[PATCH v4 0/2] Add APNE PCMCIA 100 Mbit support

[PATCH v4 0/2] Add APNE PCMCIA 100 Mbit support

[Michael Schmitz]

Add another ISA type for these cards, and switch to that type from the
APNE probe code in response to a module parameter. 

v4 addresses errors I introduced in v3, and review comments by Alex and
Finn. 

v3 was the first version of this patch series sent to net-next (apne.c part
only).

Tested by Alex on his Amiga 1200.

Cheers,

   Michael

[PATCH v4 1/2] m68k: io_mm.h - add APNE 100 MBit support

[Michael Schmitz]

Add code to support 10 Mbit and 100 Mbit mode for APNE driver.

A new ISA type ISA_TYPE_AG16 dynamically switches the Amiga
ISA inb accessor to word access as required by the 100 Mbit cards.

Patch modified after patch "[PATCH RFC net-next] Amiga PCMCIA
100 MBit card support" submitted to netdev 2018/09/16 by Alex
Kazik <alex@kazik.de>.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>

--
Changes from v3:

Finn Thain:
- revert isa_inb() define reordering
- omit redundant #ifdef around ISA_TYPE_AG16 case labels

Changes from v1:

Andreas Schwab:
- remove redundant fallthrough annotations

Changes from RFC:

Geert Uytterhoeven:
- rename ISA_TYPE_AG100 to ISA_TYPE_AG16 (16 bit cards)
- move ISA_TYPE_AG16 case inside #ifdef CONFIG_AMIGA_PCMCIA
- change #if defined(CONFIG_APNE_100MBIT) to #ifdef
- fix parentheses in isa_inb() define
- omit comment about compiler optimization

- add ISA_TYPE_AG16 case to isa_delay()
---
 arch/m68k/include/asm/io_mm.h | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index 9c521b0..6a037c1 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -101,6 +101,11 @@
 #define ISA_TYPE_Q40  (1)
 #define ISA_TYPE_AG   (2)
 #define ISA_TYPE_ENEC (3)
+#define ISA_TYPE_AG16 (4)	/* for 100 MBit APNE card */
+
+#if defined(CONFIG_APNE100MBIT)
+#define MULTI_ISA 1
+#endif
 
 #if defined(CONFIG_Q40) && !defined(MULTI_ISA)
 #define ISA_TYPE ISA_TYPE_Q40
@@ -136,6 +141,7 @@ static inline u8 __iomem *isa_itb(unsigned long addr)
     case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
 #endif
 #ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG16:
     case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
 #endif
 #ifdef CONFIG_ATARI_ROM_ISA
@@ -155,6 +161,7 @@ static inline u16 __iomem *isa_itw(unsigned long addr)
     case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr);
 #endif
 #ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG16:
     case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
 #endif
 #ifdef CONFIG_ATARI_ROM_ISA
@@ -171,6 +178,7 @@ static inline u32 __iomem *isa_itl(unsigned long addr)
   switch(ISA_TYPE)
     {
 #ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG16:
     case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
 #endif
     }
@@ -184,6 +192,7 @@ static inline u8 __iomem *isa_mtb(unsigned long addr)
     case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
 #endif
 #ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG16:
     case ISA_TYPE_AG: return (u8 __iomem *)addr;
 #endif
 #ifdef CONFIG_ATARI_ROM_ISA
@@ -203,6 +212,7 @@ static inline u16 __iomem *isa_mtw(unsigned long addr)
     case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
 #endif
 #ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG16:
     case ISA_TYPE_AG: return (u16 __iomem *)addr;
 #endif
 #ifdef CONFIG_ATARI_ROM_ISA
@@ -216,7 +226,7 @@ static inline u16 __iomem *isa_mtw(unsigned long addr)
 }
 
 
-#define isa_inb(port)      in_8(isa_itb(port))
+#define isa_inb(port)      ((ISA_TYPE == ISA_TYPE_AG16) ? ((port) & 1 ? isa_inw((port) - 1) & 0xff : isa_inw(port) >> 8) : in_8(isa_itb(port)))
 #define isa_inw(port)      (ISA_SEX ? in_be16(isa_itw(port)) : in_le16(isa_itw(port)))
 #define isa_inl(port)      (ISA_SEX ? in_be32(isa_itl(port)) : in_le32(isa_itl(port)))
 #define isa_outb(val,port) out_8(isa_itb(port),(val))
@@ -270,6 +280,7 @@ static inline void isa_delay(void)
     case ISA_TYPE_Q40: isa_outb(0,0x80); break;
 #endif
 #ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG16: break;
     case ISA_TYPE_AG: break;
 #endif
 #ifdef CONFIG_ATARI_ROM_ISA
-- 
2.7.4

[PATCH net-next v4 2/2] net/8390: apne.c - add 100 Mbit support to apne.c driver

[Michael Schmitz]

Add Kconfig option, module parameter and PCMCIA reset code
required to support 100 Mbit PCMCIA ethernet cards on Amiga.

10 Mbit and 100 Mbit mode are supported by the same module.
A module parameter switches Amiga ISA IO accessors to word
access by changing isa_type at runtime. Additional code to
reset the PCMCIA hardware is also added to the driver probe.

Patch modified after patch "[PATCH RFC net-next] Amiga PCMCIA
100 MBit card support" submitted to netdev 2018/09/16 by Alex
Kazik <alex@kazik.de>.

CC: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/1622958877-2026-1-git-send-email-schmitzmic@gmail.com
Tested-by: Alex Kazik <alex@kazik.de>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>

--
Changes from v3:

- change module parameter name to match Kconfig help

Finn Thain:
- fix coding style in new card reset code block
- allow reset of isa_type by module parameter

Changes from v1:

- fix module parameter name in Kconfig help text

Alex Kazik:
- change module parameter type to bool, fix module parameter
  permission

Changes from RFC:

Geert Uytterhoeven:
- change APNE_100MBIT to depend on APNE
- change '---help---' to 'help' (former no longer supported)
- fix whitespace errors
- fix module_param_named() arg count
- protect all added code by #ifdef CONFIG_APNE_100MBIT
---
 drivers/net/ethernet/8390/Kconfig | 12 ++++++++++++
 drivers/net/ethernet/8390/apne.c  | 25 +++++++++++++++++++++++++
 2 files changed, 37 insertions(+)

diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index 9f4b302..6e4db63 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -143,6 +143,18 @@ config APNE
 	  To compile this driver as a module, choose M here: the module
 	  will be called apne.
 
+config APNE100MBIT
+	bool "PCMCIA NE2000 100MBit support"
+	depends on APNE
+	default n
+	help
+	  This changes the driver to support 10/100Mbit cards (e.g. Netgear
+	  FA411, CNet Singlepoint). 10 MBit cards and 100 MBit cards are
+	  supported by the same driver.
+
+	  To activate 100 Mbit support at runtime or from the kernel
+	  command line, use the apne.100mbit module parameter.
+
 config PCMCIA_PCNET
 	tristate "NE2000 compatible PCMCIA support"
 	depends on PCMCIA
diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c
index fe6c834..d294f0c 100644
--- a/drivers/net/ethernet/8390/apne.c
+++ b/drivers/net/ethernet/8390/apne.c
@@ -120,6 +120,12 @@ static u32 apne_msg_enable;
 module_param_named(msg_enable, apne_msg_enable, uint, 0444);
 MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)");
 
+#ifdef CONFIG_APNE100MBIT
+static bool apne_100_mbit;
+module_param_named(100_mbit, apne_100_mbit, bool, 0444);
+MODULE_PARM_DESC(100_mbit, "Enable 100 Mbit support");
+#endif
+
 struct net_device * __init apne_probe(int unit)
 {
 	struct net_device *dev;
@@ -139,6 +145,13 @@ struct net_device * __init apne_probe(int unit)
 	if ( !(AMIGAHW_PRESENT(PCMCIA)) )
 		return ERR_PTR(-ENODEV);
 
+#ifdef CONFIG_APNE100MBIT
+	if (apne_100_mbit)
+		isa_type = ISA_TYPE_AG16;
+	else
+		isa_type = ISA_TYPE_AG;
+#endif
+
 	pr_info("Looking for PCMCIA ethernet card : ");
 
 	/* check if a card is inserted */
@@ -590,6 +603,18 @@ static int init_pcmcia(void)
 #endif
 	u_long offset;
 
+#ifdef CONFIG_APNE100MBIT
+	/* reset card (idea taken from CardReset by Artur Pogoda) */
+	{
+		u_char  tmp = gayle.intreq;
+
+		gayle.intreq = 0xff;
+		mdelay(1);
+		gayle.intreq = tmp;
+		mdelay(300);
+	}
+#endif
+
 	pcmcia_reset();
 	pcmcia_program_voltage(PCMCIA_0V);
 	pcmcia_access_speed(PCMCIA_SPEED_250NS);
-- 
2.7.4