Re: [PATCH 9/9] m68knommu: use ColdFire DMA timer module on devices that have it

From: Steven King <sfking@fdwdc.com>
To: linux-m68k@vger.kernel.org
Cc: uclinux-dev@uclinux.org, gerg@uclinux.org
Subject: Re: [PATCH 9/9] m68knommu: use ColdFire DMA timer module on devices that have it
Date: Wed, 28 May 2014 08:59:20 -0700	[thread overview]
Message-ID: <201405280859.21357.sfking@fdwdc.com> (raw)
In-Reply-To: <1401238189-4402-10-git-send-email-gerg@uclinux.org>

On Tuesday 27 May 2014 5:49:49 pm gerg@uclinux.org wrote:
> From: Greg Ungerer <gerg@uclinux.org>
>
> The DMA timer hardware module is present in all of the 520x, 527x, 528x,
> 53xx and 5441x families of ColdFire SoC. Use it as clock source on those
> parts to give a more accurate clock.
>
> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
> ---
>  arch/m68k/platform/coldfire/Makefile | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/m68k/platform/coldfire/Makefile
> b/arch/m68k/platform/coldfire/Makefile index 0818f77..cdd0b03 100644
> --- a/arch/m68k/platform/coldfire/Makefile
> +++ b/arch/m68k/platform/coldfire/Makefile
> @@ -17,18 +17,18 @@ asflags-$(CONFIG_FULLDEBUG) :=
> -DDEBUGGER_COMPATIBLE_CACHE=1 obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o
> device.o dma.o entry.o vectors.o obj-$(CONFIG_M5206)	+= m5206.o timers.o
> intc.o reset.o
>  obj-$(CONFIG_M5206e)	+= m5206.o timers.o intc.o reset.o
> -obj-$(CONFIG_M520x)	+= m520x.o pit.o intc-simr.o reset.o
> +obj-$(CONFIG_M520x)	+= m520x.o pit.o dma_timer.o intc-simr.o reset.o
>  obj-$(CONFIG_M523x)	+= m523x.o pit.o dma_timer.o intc-2.o reset.o
>  obj-$(CONFIG_M5249)	+= m5249.o timers.o intc.o intc-5249.o reset.o
>  obj-$(CONFIG_M525x)	+= m525x.o timers.o intc.o intc-525x.o reset.o
> -obj-$(CONFIG_M527x)	+= m527x.o pit.o intc-2.o reset.o
> +obj-$(CONFIG_M527x)	+= m527x.o pit.o dma_timer.o intc-2.o reset.o
>  obj-$(CONFIG_M5272)	+= m5272.o intc-5272.o timers.o
> -obj-$(CONFIG_M528x)	+= m528x.o pit.o intc-2.o reset.o
> +obj-$(CONFIG_M528x)	+= m528x.o pit.o dma_timer.o intc-2.o reset.o
>  obj-$(CONFIG_M5307)	+= m5307.o timers.o intc.o reset.o
> -obj-$(CONFIG_M53xx)	+= m53xx.o pit.o intc-simr.o reset.o
> +obj-$(CONFIG_M53xx)	+= m53xx.o pit.o dma_timer.o intc-simr.o reset.o
>  obj-$(CONFIG_M5407)	+= m5407.o timers.o intc.o reset.o
>  obj-$(CONFIG_M54xx)	+= m54xx.o sltimers.o intc-2.o
> -obj-$(CONFIG_M5441x)	+= m5441x.o pit.o intc-simr.o reset.o
> +obj-$(CONFIG_M5441x)	+= m5441x.o pit.o dma_timer.o intc-simr.o reset.o
>
>  obj-$(CONFIG_NETtel)	+= nettel.o
>  obj-$(CONFIG_CLEOPATRA)	+= nettel.o

Hi Greg,

I couldn't get this part to apply.  What tree are you using?
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev