* [PATCH] MC68328 platform code fix
@ 2013-02-20 23:47 Luis Alves
2013-02-21 13:53 ` Greg Ungerer
0 siblings, 1 reply; 4+ messages in thread
From: Luis Alves @ 2013-02-20 23:47 UTC (permalink / raw)
To: uclinux-dev, linux-m68k; +Cc: gerg, ljalvs
Hi,
This patch fixes the 68328 platform init code.
I've been able to successefully build the kernel for the Xcopilot (Pilot3) target.
A boot log can be found here: http://pastebin.com/9rT02vVi
Regards,
Luis
Signed-off-by: Luis Alves <ljalvs@gmail.com>
---
arch/m68k/include/asm/MC68328.h | 60 +++++++++++++++++------------------
arch/m68k/platform/68000/m68328.c | 6 ++--
arch/m68k/platform/68000/m68EZ328.c | 1 +
arch/m68k/platform/68000/m68VZ328.c | 1 +
arch/m68k/platform/68000/timers.c | 20 +++++++++---
5 files changed, 49 insertions(+), 39 deletions(-)
diff --git a/arch/m68k/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h
index a337e56..b3d7afb 100644
--- a/arch/m68k/include/asm/MC68328.h
+++ b/arch/m68k/include/asm/MC68328.h
@@ -288,12 +288,12 @@
/* '328-compatible definitions */
#define SPI_IRQ_NUM SPIM_IRQ_NUM
-#define TMR_IRQ_NUM TMR1_IRQ_NUM
+#define TMR_IRQ_NUM TMR2_IRQ_NUM
/*
* Here go the bitmasks themselves
*/
-#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
+#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master interrupt */
#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
@@ -327,7 +327,7 @@
#define IWR_ADDR 0xfffff308
#define IWR LONG_REF(IWR_ADDR)
-#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
@@ -357,7 +357,7 @@
#define ISR_ADDR 0xfffff30c
#define ISR LONG_REF(ISR_ADDR)
-#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
@@ -391,7 +391,7 @@
#define IPR_ADDR 0xfffff310
#define IPR LONG_REF(IPR_ADDR)
-#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
@@ -708,8 +708,8 @@
#define TCTL_FRR 0x0010 /* Free-Run Mode */
/* 'EZ328-compatible definitions */
-#define TCTL_ADDR TCTL1_ADDR
-#define TCTL TCTL1
+#define TCTL_ADDR TCTL2_ADDR
+#define TCTL TCTL2
/*
* Timer Unit 1 and 2 Prescaler Registers
@@ -720,8 +720,8 @@
#define TPRER2 WORD_REF(TPRER2_ADDR)
/* 'EZ328-compatible definitions */
-#define TPRER_ADDR TPRER1_ADDR
-#define TPRER TPRER1
+#define TPRER_ADDR TPRER2_ADDR
+#define TPRER TPRER2
/*
* Timer Unit 1 and 2 Compare Registers
@@ -732,8 +732,8 @@
#define TCMP2 WORD_REF(TCMP2_ADDR)
/* 'EZ328-compatible definitions */
-#define TCMP_ADDR TCMP1_ADDR
-#define TCMP TCMP1
+#define TCMP_ADDR TCMP2_ADDR
+#define TCMP TCMP2
/*
* Timer Unit 1 and 2 Capture Registers
@@ -744,8 +744,8 @@
#define TCR2 WORD_REF(TCR2_ADDR)
/* 'EZ328-compatible definitions */
-#define TCR_ADDR TCR1_ADDR
-#define TCR TCR1
+#define TCR_ADDR TCR2_ADDR
+#define TCR TCR2
/*
* Timer Unit 1 and 2 Counter Registers
@@ -756,8 +756,8 @@
#define TCN2 WORD_REF(TCN2_ADDR)
/* 'EZ328-compatible definitions */
-#define TCN_ADDR TCN1_ADDR
-#define TCN TCN
+#define TCN_ADDR TCN2_ADDR
+#define TCN TCN2
/*
* Timer Unit 1 and 2 Status Registers
@@ -771,8 +771,8 @@
#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
/* 'EZ328-compatible definitions */
-#define TSTAT_ADDR TSTAT1_ADDR
-#define TSTAT TSTAT1
+#define TSTAT_ADDR TSTAT2_ADDR
+#define TSTAT TSTAT2
/*
* Watchdog Compare Register
@@ -973,27 +973,27 @@
/* generalization of uart control registers to support multiple ports: */
typedef volatile struct {
- volatile unsigned short int ustcnt;
- volatile unsigned short int ubaud;
+ volatile u16 ustcnt;
+ volatile u16 ubaud;
union {
- volatile unsigned short int w;
+ volatile u16 w;
struct {
- volatile unsigned char status;
- volatile unsigned char rxdata;
+ volatile u8 status;
+ volatile u8 rxdata;
} b;
} urx;
union {
- volatile unsigned short int w;
+ volatile u16 w;
struct {
- volatile unsigned char status;
- volatile unsigned char txdata;
+ volatile u8 status;
+ volatile u8 txdata;
} b;
} utx;
- volatile unsigned short int umisc;
- volatile unsigned short int pad1;
- volatile unsigned short int pad2;
- volatile unsigned short int pad3;
-} __attribute__((packed)) m68328_uart;
+ volatile u16 umisc;
+ volatile u16 pad1;
+ volatile u16 pad2;
+ volatile u16 pad3;
+} m68328_uart;
/**********
diff --git a/arch/m68k/platform/68000/m68328.c b/arch/m68k/platform/68000/m68328.c
index a86eb66..c042e498 100644
--- a/arch/m68k/platform/68000/m68328.c
+++ b/arch/m68k/platform/68000/m68328.c
@@ -20,9 +20,6 @@
#include <linux/rtc.h>
#include <asm/machdep.h>
#include <asm/MC68328.h>
-#if defined(CONFIG_PILOT) || defined(CONFIG_INIT_LCD)
-#include "bootlogo.h"
-#endif
/***************************************************************************/
@@ -42,13 +39,14 @@ void m68328_reset (void)
/***************************************************************************/
-void config_BSP(char *command, int len)
+void __init config_BSP(char *command, int len)
{
printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
mach_hwclk = m68328_hwclk;
+ mach_sched_init = hw_timer_init;
mach_reset = m68328_reset;
}
diff --git a/arch/m68k/platform/68000/m68EZ328.c b/arch/m68k/platform/68000/m68EZ328.c
index a6eb72d..84a1a9d 100644
--- a/arch/m68k/platform/68000/m68EZ328.c
+++ b/arch/m68k/platform/68000/m68EZ328.c
@@ -70,6 +70,7 @@ void config_BSP(char *command, int len)
#endif
mach_hwclk = m68328_hwclk;
+ mach_sched_init = hw_timer_init;
mach_reset = m68ez328_reset;
}
diff --git a/arch/m68k/platform/68000/m68VZ328.c b/arch/m68k/platform/68000/m68VZ328.c
index eb6964f..8c4ae7a 100644
--- a/arch/m68k/platform/68000/m68VZ328.c
+++ b/arch/m68k/platform/68000/m68VZ328.c
@@ -182,6 +182,7 @@ void config_BSP(char *command, int size)
init_hardware(command, size);
mach_hwclk = m68328_hwclk;
+ mach_sched_init = hw_timer_init;
mach_reset = m68vz328_reset;
}
diff --git a/arch/m68k/platform/68000/timers.c b/arch/m68k/platform/68000/timers.c
index ec30acb..49b4b63 100644
--- a/arch/m68k/platform/68000/timers.c
+++ b/arch/m68k/platform/68000/timers.c
@@ -24,7 +24,16 @@
#include <asm/setup.h>
#include <asm/pgtable.h>
#include <asm/machdep.h>
+#if defined(CONFIG_M68EZ328)
+#include <asm/MC68EZ328.h>
+#else
+#if defined(CONFIG_M68VZ328)
#include <asm/MC68VZ328.h>
+#else
+#include <asm/MC68328.h>
+#endif /* CONFIG_M68VZ328 */
+#endif /* CONFIG_M68EZ328 */
+
/***************************************************************************/
@@ -105,18 +114,19 @@ void hw_timer_init(irq_handler_t handler)
/* disable timer 1 */
TCTL = 0;
- /* set ISR */
- setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
-
/* Restart mode, Enable int, Set clock source */
TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
TPRER = CLOCK_PRE;
TCMP = TICKS_PER_JIFFY;
- /* Enable timer 1 */
- TCTL |= TCTL_TEN;
clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
timer_interrupt = handler;
+
+ /* set ISR */
+ setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
+
+ /* Enable timer 1 */
+ TCTL |= TCTL_TEN;
}
/***************************************************************************/
--
1.7.10.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] MC68328 platform code fix
2013-02-20 23:47 [PATCH] MC68328 platform code fix Luis Alves
@ 2013-02-21 13:53 ` Greg Ungerer
2013-02-21 19:57 ` Luis Alves
0 siblings, 1 reply; 4+ messages in thread
From: Greg Ungerer @ 2013-02-21 13:53 UTC (permalink / raw)
To: Luis Alves; +Cc: uclinux-dev, linux-m68k
Hi Luis,
On 21/02/13 09:47, Luis Alves wrote:
> This patch fixes the 68328 platform init code.
> I've been able to successefully build the kernel for the Xcopilot (Pilot3) target.
>
> A boot log can be found here: http://pastebin.com/9rT02vVi
Nice to have that working again.
Can I get you to break this up into logical chunks though?
Probably the pure definition fixups (broken with whitespace) as one.
Timer fix up changes look like another. And the changes to the data
types in m68328_uart look to be cleanup but not a functional change?
Regards
Greg
> Signed-off-by: Luis Alves <ljalvs@gmail.com>
> ---
> arch/m68k/include/asm/MC68328.h | 60 +++++++++++++++++------------------
> arch/m68k/platform/68000/m68328.c | 6 ++--
> arch/m68k/platform/68000/m68EZ328.c | 1 +
> arch/m68k/platform/68000/m68VZ328.c | 1 +
> arch/m68k/platform/68000/timers.c | 20 +++++++++---
> 5 files changed, 49 insertions(+), 39 deletions(-)
>
> diff --git a/arch/m68k/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h
> index a337e56..b3d7afb 100644
> --- a/arch/m68k/include/asm/MC68328.h
> +++ b/arch/m68k/include/asm/MC68328.h
> @@ -288,12 +288,12 @@
>
> /* '328-compatible definitions */
> #define SPI_IRQ_NUM SPIM_IRQ_NUM
> -#define TMR_IRQ_NUM TMR1_IRQ_NUM
> +#define TMR_IRQ_NUM TMR2_IRQ_NUM
>
> /*
> * Here go the bitmasks themselves
> */
> -#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
> +#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master interrupt */
> #define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
> #define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
> #define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
> @@ -327,7 +327,7 @@
> #define IWR_ADDR 0xfffff308
> #define IWR LONG_REF(IWR_ADDR)
>
> -#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
> +#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
> #define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
> #define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
> #define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
> @@ -357,7 +357,7 @@
> #define ISR_ADDR 0xfffff30c
> #define ISR LONG_REF(ISR_ADDR)
>
> -#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
> +#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
> #define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
> #define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
> #define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
> @@ -391,7 +391,7 @@
> #define IPR_ADDR 0xfffff310
> #define IPR LONG_REF(IPR_ADDR)
>
> -#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
> +#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
> #define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
> #define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
> #define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
> @@ -708,8 +708,8 @@
> #define TCTL_FRR 0x0010 /* Free-Run Mode */
>
> /* 'EZ328-compatible definitions */
> -#define TCTL_ADDR TCTL1_ADDR
> -#define TCTL TCTL1
> +#define TCTL_ADDR TCTL2_ADDR
> +#define TCTL TCTL2
>
> /*
> * Timer Unit 1 and 2 Prescaler Registers
> @@ -720,8 +720,8 @@
> #define TPRER2 WORD_REF(TPRER2_ADDR)
>
> /* 'EZ328-compatible definitions */
> -#define TPRER_ADDR TPRER1_ADDR
> -#define TPRER TPRER1
> +#define TPRER_ADDR TPRER2_ADDR
> +#define TPRER TPRER2
>
> /*
> * Timer Unit 1 and 2 Compare Registers
> @@ -732,8 +732,8 @@
> #define TCMP2 WORD_REF(TCMP2_ADDR)
>
> /* 'EZ328-compatible definitions */
> -#define TCMP_ADDR TCMP1_ADDR
> -#define TCMP TCMP1
> +#define TCMP_ADDR TCMP2_ADDR
> +#define TCMP TCMP2
>
> /*
> * Timer Unit 1 and 2 Capture Registers
> @@ -744,8 +744,8 @@
> #define TCR2 WORD_REF(TCR2_ADDR)
>
> /* 'EZ328-compatible definitions */
> -#define TCR_ADDR TCR1_ADDR
> -#define TCR TCR1
> +#define TCR_ADDR TCR2_ADDR
> +#define TCR TCR2
>
> /*
> * Timer Unit 1 and 2 Counter Registers
> @@ -756,8 +756,8 @@
> #define TCN2 WORD_REF(TCN2_ADDR)
>
> /* 'EZ328-compatible definitions */
> -#define TCN_ADDR TCN1_ADDR
> -#define TCN TCN
> +#define TCN_ADDR TCN2_ADDR
> +#define TCN TCN2
>
> /*
> * Timer Unit 1 and 2 Status Registers
> @@ -771,8 +771,8 @@
> #define TSTAT_CAPT 0x0001 /* Capture Event occurred */
>
> /* 'EZ328-compatible definitions */
> -#define TSTAT_ADDR TSTAT1_ADDR
> -#define TSTAT TSTAT1
> +#define TSTAT_ADDR TSTAT2_ADDR
> +#define TSTAT TSTAT2
>
> /*
> * Watchdog Compare Register
> @@ -973,27 +973,27 @@
>
> /* generalization of uart control registers to support multiple ports: */
> typedef volatile struct {
> - volatile unsigned short int ustcnt;
> - volatile unsigned short int ubaud;
> + volatile u16 ustcnt;
> + volatile u16 ubaud;
> union {
> - volatile unsigned short int w;
> + volatile u16 w;
> struct {
> - volatile unsigned char status;
> - volatile unsigned char rxdata;
> + volatile u8 status;
> + volatile u8 rxdata;
> } b;
> } urx;
> union {
> - volatile unsigned short int w;
> + volatile u16 w;
> struct {
> - volatile unsigned char status;
> - volatile unsigned char txdata;
> + volatile u8 status;
> + volatile u8 txdata;
> } b;
> } utx;
> - volatile unsigned short int umisc;
> - volatile unsigned short int pad1;
> - volatile unsigned short int pad2;
> - volatile unsigned short int pad3;
> -} __attribute__((packed)) m68328_uart;
> + volatile u16 umisc;
> + volatile u16 pad1;
> + volatile u16 pad2;
> + volatile u16 pad3;
> +} m68328_uart;
>
>
> /**********
> diff --git a/arch/m68k/platform/68000/m68328.c b/arch/m68k/platform/68000/m68328.c
> index a86eb66..c042e498 100644
> --- a/arch/m68k/platform/68000/m68328.c
> +++ b/arch/m68k/platform/68000/m68328.c
> @@ -20,9 +20,6 @@
> #include <linux/rtc.h>
> #include <asm/machdep.h>
> #include <asm/MC68328.h>
> -#if defined(CONFIG_PILOT) || defined(CONFIG_INIT_LCD)
> -#include "bootlogo.h"
> -#endif
>
> /***************************************************************************/
>
> @@ -42,13 +39,14 @@ void m68328_reset (void)
>
> /***************************************************************************/
>
> -void config_BSP(char *command, int len)
> +void __init config_BSP(char *command, int len)
> {
> printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
> printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
> printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
>
> mach_hwclk = m68328_hwclk;
> + mach_sched_init = hw_timer_init;
> mach_reset = m68328_reset;
> }
>
> diff --git a/arch/m68k/platform/68000/m68EZ328.c b/arch/m68k/platform/68000/m68EZ328.c
> index a6eb72d..84a1a9d 100644
> --- a/arch/m68k/platform/68000/m68EZ328.c
> +++ b/arch/m68k/platform/68000/m68EZ328.c
> @@ -70,6 +70,7 @@ void config_BSP(char *command, int len)
> #endif
>
> mach_hwclk = m68328_hwclk;
> + mach_sched_init = hw_timer_init;
> mach_reset = m68ez328_reset;
> }
>
> diff --git a/arch/m68k/platform/68000/m68VZ328.c b/arch/m68k/platform/68000/m68VZ328.c
> index eb6964f..8c4ae7a 100644
> --- a/arch/m68k/platform/68000/m68VZ328.c
> +++ b/arch/m68k/platform/68000/m68VZ328.c
> @@ -182,6 +182,7 @@ void config_BSP(char *command, int size)
> init_hardware(command, size);
>
> mach_hwclk = m68328_hwclk;
> + mach_sched_init = hw_timer_init;
> mach_reset = m68vz328_reset;
> }
>
> diff --git a/arch/m68k/platform/68000/timers.c b/arch/m68k/platform/68000/timers.c
> index ec30acb..49b4b63 100644
> --- a/arch/m68k/platform/68000/timers.c
> +++ b/arch/m68k/platform/68000/timers.c
> @@ -24,7 +24,16 @@
> #include <asm/setup.h>
> #include <asm/pgtable.h>
> #include <asm/machdep.h>
> +#if defined(CONFIG_M68EZ328)
> +#include <asm/MC68EZ328.h>
> +#else
> +#if defined(CONFIG_M68VZ328)
> #include <asm/MC68VZ328.h>
> +#else
> +#include <asm/MC68328.h>
> +#endif /* CONFIG_M68VZ328 */
> +#endif /* CONFIG_M68EZ328 */
> +
>
> /***************************************************************************/
>
> @@ -105,18 +114,19 @@ void hw_timer_init(irq_handler_t handler)
> /* disable timer 1 */
> TCTL = 0;
>
> - /* set ISR */
> - setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
> -
> /* Restart mode, Enable int, Set clock source */
> TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
> TPRER = CLOCK_PRE;
> TCMP = TICKS_PER_JIFFY;
>
> - /* Enable timer 1 */
> - TCTL |= TCTL_TEN;
> clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
> timer_interrupt = handler;
> +
> + /* set ISR */
> + setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
> +
> + /* Enable timer 1 */
> + TCTL |= TCTL_TEN;
> }
>
> /***************************************************************************/
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] MC68328 platform code fix
2013-02-21 13:53 ` Greg Ungerer
@ 2013-02-21 19:57 ` Luis Alves
2013-02-22 3:57 ` Greg Ungerer
0 siblings, 1 reply; 4+ messages in thread
From: Luis Alves @ 2013-02-21 19:57 UTC (permalink / raw)
To: Greg Ungerer; +Cc: uclinux-dev, linux-m68k
Hi Greg,
Sure I can do the split up.
About the changes to the data types in m68328_uart, there is only one
that was preventing the Xcopilot to work and that was the
__attribute__((packed))
I guess gcc (tested with 4.5.1 and 4.7.2 with strict alignment)
generate a very ugly assembly. It makes all memory access byte sized
and makes a (useless?) read before the write (check below).
In a real system I guess it would still work but Xcopilot doesn't
support byte access to the uart registers.
(gcc 4.3.x onwards really don't care about no unaligned 68k cpu's...)
Anyway, since the structure is 'well behaved', the packed attribute is
not needed.
Packed vs Non-packed example:
-- C --
uart->ustcnt = USTCNT_UEN;
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
-- asm (packed attribute) --
10cc002a: 1014 moveb %a4@,%d0
10cc002c: 18bc ff80 moveb #-128,%a4@
10cc0030: 102c 0001 moveb %a4@(1),%d0
10cc0034: 197c 0000 0001 moveb #0,%a4@(1)
10cc003a: 1014 moveb %a4@,%d0
10cc003c: 18bc ffe0 moveb #-32,%a4@
10cc0040: 102c 0001 moveb %a4@(1),%d0
10cc0044: 197c 0000 0001 moveb #0,%a4@(1)
-- asm (no packed attribute) --
10cbfe8c: 38bc 8000 movew #-32768,%a4@
10cbfe90: 38bc e000 movew #-8192,%a4@
Regards,
Luis
On Thu, Feb 21, 2013 at 1:53 PM, Greg Ungerer <gerg@uclinux.org> wrote:
> Hi Luis,
>
>
> On 21/02/13 09:47, Luis Alves wrote:
>>
>> This patch fixes the 68328 platform init code.
>> I've been able to successefully build the kernel for the Xcopilot (Pilot3)
>> target.
>>
>> A boot log can be found here: http://pastebin.com/9rT02vVi
>
>
> Nice to have that working again.
>
> Can I get you to break this up into logical chunks though?
> Probably the pure definition fixups (broken with whitespace) as one.
> Timer fix up changes look like another. And the changes to the data
> types in m68328_uart look to be cleanup but not a functional change?
>
> Regards
> Greg
>
>
>
>> Signed-off-by: Luis Alves <ljalvs@gmail.com>
>> ---
>> arch/m68k/include/asm/MC68328.h | 60
>> +++++++++++++++++------------------
>> arch/m68k/platform/68000/m68328.c | 6 ++--
>> arch/m68k/platform/68000/m68EZ328.c | 1 +
>> arch/m68k/platform/68000/m68VZ328.c | 1 +
>> arch/m68k/platform/68000/timers.c | 20 +++++++++---
>> 5 files changed, 49 insertions(+), 39 deletions(-)
>>
>> diff --git a/arch/m68k/include/asm/MC68328.h
>> b/arch/m68k/include/asm/MC68328.h
>> index a337e56..b3d7afb 100644
>> --- a/arch/m68k/include/asm/MC68328.h
>> +++ b/arch/m68k/include/asm/MC68328.h
>> @@ -288,12 +288,12 @@
>>
>> /* '328-compatible definitions */
>> #define SPI_IRQ_NUM SPIM_IRQ_NUM
>> -#define TMR_IRQ_NUM TMR1_IRQ_NUM
>> +#define TMR_IRQ_NUM TMR2_IRQ_NUM
>>
>> /*
>> * Here go the bitmasks themselves
>> */
>> -#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master
>> interrupt */
>> +#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master
>> interrupt */
>> #define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2
>> interrupt */
>> #define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
>> #define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog
>> Timer interrupt */
>> @@ -327,7 +327,7 @@
>> #define IWR_ADDR 0xfffff308
>> #define IWR LONG_REF(IWR_ADDR)
>>
>> -#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
>> +#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
>> #define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2
>> interrupt */
>> #define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
>> #define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer
>> interrupt */
>> @@ -357,7 +357,7 @@
>> #define ISR_ADDR 0xfffff30c
>> #define ISR LONG_REF(ISR_ADDR)
>>
>> -#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
>> +#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
>> #define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2
>> interrupt */
>> #define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
>> #define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer
>> interrupt */
>> @@ -391,7 +391,7 @@
>> #define IPR_ADDR 0xfffff310
>> #define IPR LONG_REF(IPR_ADDR)
>>
>> -#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
>> +#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
>> #define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2
>> interrupt */
>> #define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
>> #define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer
>> interrupt */
>> @@ -708,8 +708,8 @@
>> #define TCTL_FRR 0x0010 /* Free-Run Mode */
>>
>> /* 'EZ328-compatible definitions */
>> -#define TCTL_ADDR TCTL1_ADDR
>> -#define TCTL TCTL1
>> +#define TCTL_ADDR TCTL2_ADDR
>> +#define TCTL TCTL2
>>
>> /*
>> * Timer Unit 1 and 2 Prescaler Registers
>> @@ -720,8 +720,8 @@
>> #define TPRER2 WORD_REF(TPRER2_ADDR)
>>
>> /* 'EZ328-compatible definitions */
>> -#define TPRER_ADDR TPRER1_ADDR
>> -#define TPRER TPRER1
>> +#define TPRER_ADDR TPRER2_ADDR
>> +#define TPRER TPRER2
>>
>> /*
>> * Timer Unit 1 and 2 Compare Registers
>> @@ -732,8 +732,8 @@
>> #define TCMP2 WORD_REF(TCMP2_ADDR)
>>
>> /* 'EZ328-compatible definitions */
>> -#define TCMP_ADDR TCMP1_ADDR
>> -#define TCMP TCMP1
>> +#define TCMP_ADDR TCMP2_ADDR
>> +#define TCMP TCMP2
>>
>> /*
>> * Timer Unit 1 and 2 Capture Registers
>> @@ -744,8 +744,8 @@
>> #define TCR2 WORD_REF(TCR2_ADDR)
>>
>> /* 'EZ328-compatible definitions */
>> -#define TCR_ADDR TCR1_ADDR
>> -#define TCR TCR1
>> +#define TCR_ADDR TCR2_ADDR
>> +#define TCR TCR2
>>
>> /*
>> * Timer Unit 1 and 2 Counter Registers
>> @@ -756,8 +756,8 @@
>> #define TCN2 WORD_REF(TCN2_ADDR)
>>
>> /* 'EZ328-compatible definitions */
>> -#define TCN_ADDR TCN1_ADDR
>> -#define TCN TCN
>> +#define TCN_ADDR TCN2_ADDR
>> +#define TCN TCN2
>>
>> /*
>> * Timer Unit 1 and 2 Status Registers
>> @@ -771,8 +771,8 @@
>> #define TSTAT_CAPT 0x0001 /* Capture Event occurred */
>>
>> /* 'EZ328-compatible definitions */
>> -#define TSTAT_ADDR TSTAT1_ADDR
>> -#define TSTAT TSTAT1
>> +#define TSTAT_ADDR TSTAT2_ADDR
>> +#define TSTAT TSTAT2
>>
>> /*
>> * Watchdog Compare Register
>> @@ -973,27 +973,27 @@
>>
>> /* generalization of uart control registers to support multiple ports:
>> */
>> typedef volatile struct {
>> - volatile unsigned short int ustcnt;
>> - volatile unsigned short int ubaud;
>> + volatile u16 ustcnt;
>> + volatile u16 ubaud;
>> union {
>> - volatile unsigned short int w;
>> + volatile u16 w;
>> struct {
>> - volatile unsigned char status;
>> - volatile unsigned char rxdata;
>> + volatile u8 status;
>> + volatile u8 rxdata;
>> } b;
>> } urx;
>> union {
>> - volatile unsigned short int w;
>> + volatile u16 w;
>> struct {
>> - volatile unsigned char status;
>> - volatile unsigned char txdata;
>> + volatile u8 status;
>> + volatile u8 txdata;
>> } b;
>> } utx;
>> - volatile unsigned short int umisc;
>> - volatile unsigned short int pad1;
>> - volatile unsigned short int pad2;
>> - volatile unsigned short int pad3;
>> -} __attribute__((packed)) m68328_uart;
>> + volatile u16 umisc;
>> + volatile u16 pad1;
>> + volatile u16 pad2;
>> + volatile u16 pad3;
>> +} m68328_uart;
>>
>>
>> /**********
>> diff --git a/arch/m68k/platform/68000/m68328.c
>> b/arch/m68k/platform/68000/m68328.c
>> index a86eb66..c042e498 100644
>> --- a/arch/m68k/platform/68000/m68328.c
>> +++ b/arch/m68k/platform/68000/m68328.c
>> @@ -20,9 +20,6 @@
>> #include <linux/rtc.h>
>> #include <asm/machdep.h>
>> #include <asm/MC68328.h>
>> -#if defined(CONFIG_PILOT) || defined(CONFIG_INIT_LCD)
>> -#include "bootlogo.h"
>> -#endif
>>
>>
>> /***************************************************************************/
>>
>> @@ -42,13 +39,14 @@ void m68328_reset (void)
>>
>>
>> /***************************************************************************/
>>
>> -void config_BSP(char *command, int len)
>> +void __init config_BSP(char *command, int len)
>> {
>> printk(KERN_INFO "\n68328 support D. Jeff Dionne
>> <jeff@uclinux.org>\n");
>> printk(KERN_INFO "68328 support Kenneth Albanowski
>> <kjahds@kjshds.com>\n");
>> printk(KERN_INFO "68328/Pilot support Bernhard Kuhn
>> <kuhn@lpr.e-technik.tu-muenchen.de>\n");
>>
>> mach_hwclk = m68328_hwclk;
>> + mach_sched_init = hw_timer_init;
>> mach_reset = m68328_reset;
>> }
>>
>> diff --git a/arch/m68k/platform/68000/m68EZ328.c
>> b/arch/m68k/platform/68000/m68EZ328.c
>> index a6eb72d..84a1a9d 100644
>> --- a/arch/m68k/platform/68000/m68EZ328.c
>> +++ b/arch/m68k/platform/68000/m68EZ328.c
>> @@ -70,6 +70,7 @@ void config_BSP(char *command, int len)
>> #endif
>>
>> mach_hwclk = m68328_hwclk;
>> + mach_sched_init = hw_timer_init;
>> mach_reset = m68ez328_reset;
>> }
>>
>> diff --git a/arch/m68k/platform/68000/m68VZ328.c
>> b/arch/m68k/platform/68000/m68VZ328.c
>> index eb6964f..8c4ae7a 100644
>> --- a/arch/m68k/platform/68000/m68VZ328.c
>> +++ b/arch/m68k/platform/68000/m68VZ328.c
>> @@ -182,6 +182,7 @@ void config_BSP(char *command, int size)
>> init_hardware(command, size);
>>
>> mach_hwclk = m68328_hwclk;
>> + mach_sched_init = hw_timer_init;
>> mach_reset = m68vz328_reset;
>> }
>>
>> diff --git a/arch/m68k/platform/68000/timers.c
>> b/arch/m68k/platform/68000/timers.c
>> index ec30acb..49b4b63 100644
>> --- a/arch/m68k/platform/68000/timers.c
>> +++ b/arch/m68k/platform/68000/timers.c
>> @@ -24,7 +24,16 @@
>> #include <asm/setup.h>
>> #include <asm/pgtable.h>
>> #include <asm/machdep.h>
>> +#if defined(CONFIG_M68EZ328)
>> +#include <asm/MC68EZ328.h>
>> +#else
>> +#if defined(CONFIG_M68VZ328)
>> #include <asm/MC68VZ328.h>
>> +#else
>> +#include <asm/MC68328.h>
>> +#endif /* CONFIG_M68VZ328 */
>> +#endif /* CONFIG_M68EZ328 */
>> +
>>
>>
>> /***************************************************************************/
>>
>> @@ -105,18 +114,19 @@ void hw_timer_init(irq_handler_t handler)
>> /* disable timer 1 */
>> TCTL = 0;
>>
>> - /* set ISR */
>> - setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
>> -
>> /* Restart mode, Enable int, Set clock source */
>> TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
>> TPRER = CLOCK_PRE;
>> TCMP = TICKS_PER_JIFFY;
>>
>> - /* Enable timer 1 */
>> - TCTL |= TCTL_TEN;
>> clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
>> timer_interrupt = handler;
>> +
>> + /* set ISR */
>> + setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
>> +
>> + /* Enable timer 1 */
>> + TCTL |= TCTL_TEN;
>> }
>>
>>
>> /***************************************************************************/
>>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] MC68328 platform code fix
2013-02-21 19:57 ` Luis Alves
@ 2013-02-22 3:57 ` Greg Ungerer
0 siblings, 0 replies; 4+ messages in thread
From: Greg Ungerer @ 2013-02-22 3:57 UTC (permalink / raw)
To: Luis Alves; +Cc: uclinux-dev, linux-m68k
Hi Luis,
On 22/02/13 05:57, Luis Alves wrote:
> Sure I can do the split up.
Thanks.
> About the changes to the data types in m68328_uart, there is only one
> that was preventing the Xcopilot to work and that was the
> __attribute__((packed))
> I guess gcc (tested with 4.5.1 and 4.7.2 with strict alignment)
> generate a very ugly assembly. It makes all memory access byte sized
> and makes a (useless?) read before the write (check below).
> In a real system I guess it would still work but Xcopilot doesn't
> support byte access to the uart registers.
>
> (gcc 4.3.x onwards really don't care about no unaligned 68k cpu's...)
>
> Anyway, since the structure is 'well behaved', the packed attribute is
> not needed.
Agreed. I have no problem changing the types either, I find the
u8/u16/u32 types much clear when mirroring real registers. The above
description sounds like the good start as the patch description in
any case :-)
Regards
Greg
> Packed vs Non-packed example:
> -- C --
> uart->ustcnt = USTCNT_UEN;
> uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
>
>
> -- asm (packed attribute) --
> 10cc002a: 1014 moveb %a4@,%d0
> 10cc002c: 18bc ff80 moveb #-128,%a4@
> 10cc0030: 102c 0001 moveb %a4@(1),%d0
> 10cc0034: 197c 0000 0001 moveb #0,%a4@(1)
> 10cc003a: 1014 moveb %a4@,%d0
> 10cc003c: 18bc ffe0 moveb #-32,%a4@
> 10cc0040: 102c 0001 moveb %a4@(1),%d0
> 10cc0044: 197c 0000 0001 moveb #0,%a4@(1)
>
> -- asm (no packed attribute) --
> 10cbfe8c: 38bc 8000 movew #-32768,%a4@
> 10cbfe90: 38bc e000 movew #-8192,%a4@
>
>
>
> Regards,
> Luis
>
>
> On Thu, Feb 21, 2013 at 1:53 PM, Greg Ungerer <gerg@uclinux.org> wrote:
>> Hi Luis,
>>
>>
>> On 21/02/13 09:47, Luis Alves wrote:
>>>
>>> This patch fixes the 68328 platform init code.
>>> I've been able to successefully build the kernel for the Xcopilot (Pilot3)
>>> target.
>>>
>>> A boot log can be found here: http://pastebin.com/9rT02vVi
>>
>>
>> Nice to have that working again.
>>
>> Can I get you to break this up into logical chunks though?
>> Probably the pure definition fixups (broken with whitespace) as one.
>> Timer fix up changes look like another. And the changes to the data
>> types in m68328_uart look to be cleanup but not a functional change?
>>
>> Regards
>> Greg
>>
>>
>>
>>> Signed-off-by: Luis Alves <ljalvs@gmail.com>
>>> ---
>>> arch/m68k/include/asm/MC68328.h | 60
>>> +++++++++++++++++------------------
>>> arch/m68k/platform/68000/m68328.c | 6 ++--
>>> arch/m68k/platform/68000/m68EZ328.c | 1 +
>>> arch/m68k/platform/68000/m68VZ328.c | 1 +
>>> arch/m68k/platform/68000/timers.c | 20 +++++++++---
>>> 5 files changed, 49 insertions(+), 39 deletions(-)
>>>
>>> diff --git a/arch/m68k/include/asm/MC68328.h
>>> b/arch/m68k/include/asm/MC68328.h
>>> index a337e56..b3d7afb 100644
>>> --- a/arch/m68k/include/asm/MC68328.h
>>> +++ b/arch/m68k/include/asm/MC68328.h
>>> @@ -288,12 +288,12 @@
>>>
>>> /* '328-compatible definitions */
>>> #define SPI_IRQ_NUM SPIM_IRQ_NUM
>>> -#define TMR_IRQ_NUM TMR1_IRQ_NUM
>>> +#define TMR_IRQ_NUM TMR2_IRQ_NUM
>>>
>>> /*
>>> * Here go the bitmasks themselves
>>> */
>>> -#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master
>>> interrupt */
>>> +#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master
>>> interrupt */
>>> #define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2
>>> interrupt */
>>> #define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
>>> #define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog
>>> Timer interrupt */
>>> @@ -327,7 +327,7 @@
>>> #define IWR_ADDR 0xfffff308
>>> #define IWR LONG_REF(IWR_ADDR)
>>>
>>> -#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
>>> +#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
>>> #define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2
>>> interrupt */
>>> #define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
>>> #define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer
>>> interrupt */
>>> @@ -357,7 +357,7 @@
>>> #define ISR_ADDR 0xfffff30c
>>> #define ISR LONG_REF(ISR_ADDR)
>>>
>>> -#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
>>> +#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
>>> #define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2
>>> interrupt */
>>> #define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
>>> #define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer
>>> interrupt */
>>> @@ -391,7 +391,7 @@
>>> #define IPR_ADDR 0xfffff310
>>> #define IPR LONG_REF(IPR_ADDR)
>>>
>>> -#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
>>> +#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
>>> #define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2
>>> interrupt */
>>> #define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
>>> #define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer
>>> interrupt */
>>> @@ -708,8 +708,8 @@
>>> #define TCTL_FRR 0x0010 /* Free-Run Mode */
>>>
>>> /* 'EZ328-compatible definitions */
>>> -#define TCTL_ADDR TCTL1_ADDR
>>> -#define TCTL TCTL1
>>> +#define TCTL_ADDR TCTL2_ADDR
>>> +#define TCTL TCTL2
>>>
>>> /*
>>> * Timer Unit 1 and 2 Prescaler Registers
>>> @@ -720,8 +720,8 @@
>>> #define TPRER2 WORD_REF(TPRER2_ADDR)
>>>
>>> /* 'EZ328-compatible definitions */
>>> -#define TPRER_ADDR TPRER1_ADDR
>>> -#define TPRER TPRER1
>>> +#define TPRER_ADDR TPRER2_ADDR
>>> +#define TPRER TPRER2
>>>
>>> /*
>>> * Timer Unit 1 and 2 Compare Registers
>>> @@ -732,8 +732,8 @@
>>> #define TCMP2 WORD_REF(TCMP2_ADDR)
>>>
>>> /* 'EZ328-compatible definitions */
>>> -#define TCMP_ADDR TCMP1_ADDR
>>> -#define TCMP TCMP1
>>> +#define TCMP_ADDR TCMP2_ADDR
>>> +#define TCMP TCMP2
>>>
>>> /*
>>> * Timer Unit 1 and 2 Capture Registers
>>> @@ -744,8 +744,8 @@
>>> #define TCR2 WORD_REF(TCR2_ADDR)
>>>
>>> /* 'EZ328-compatible definitions */
>>> -#define TCR_ADDR TCR1_ADDR
>>> -#define TCR TCR1
>>> +#define TCR_ADDR TCR2_ADDR
>>> +#define TCR TCR2
>>>
>>> /*
>>> * Timer Unit 1 and 2 Counter Registers
>>> @@ -756,8 +756,8 @@
>>> #define TCN2 WORD_REF(TCN2_ADDR)
>>>
>>> /* 'EZ328-compatible definitions */
>>> -#define TCN_ADDR TCN1_ADDR
>>> -#define TCN TCN
>>> +#define TCN_ADDR TCN2_ADDR
>>> +#define TCN TCN2
>>>
>>> /*
>>> * Timer Unit 1 and 2 Status Registers
>>> @@ -771,8 +771,8 @@
>>> #define TSTAT_CAPT 0x0001 /* Capture Event occurred */
>>>
>>> /* 'EZ328-compatible definitions */
>>> -#define TSTAT_ADDR TSTAT1_ADDR
>>> -#define TSTAT TSTAT1
>>> +#define TSTAT_ADDR TSTAT2_ADDR
>>> +#define TSTAT TSTAT2
>>>
>>> /*
>>> * Watchdog Compare Register
>>> @@ -973,27 +973,27 @@
>>>
>>> /* generalization of uart control registers to support multiple ports:
>>> */
>>> typedef volatile struct {
>>> - volatile unsigned short int ustcnt;
>>> - volatile unsigned short int ubaud;
>>> + volatile u16 ustcnt;
>>> + volatile u16 ubaud;
>>> union {
>>> - volatile unsigned short int w;
>>> + volatile u16 w;
>>> struct {
>>> - volatile unsigned char status;
>>> - volatile unsigned char rxdata;
>>> + volatile u8 status;
>>> + volatile u8 rxdata;
>>> } b;
>>> } urx;
>>> union {
>>> - volatile unsigned short int w;
>>> + volatile u16 w;
>>> struct {
>>> - volatile unsigned char status;
>>> - volatile unsigned char txdata;
>>> + volatile u8 status;
>>> + volatile u8 txdata;
>>> } b;
>>> } utx;
>>> - volatile unsigned short int umisc;
>>> - volatile unsigned short int pad1;
>>> - volatile unsigned short int pad2;
>>> - volatile unsigned short int pad3;
>>> -} __attribute__((packed)) m68328_uart;
>>> + volatile u16 umisc;
>>> + volatile u16 pad1;
>>> + volatile u16 pad2;
>>> + volatile u16 pad3;
>>> +} m68328_uart;
>>>
>>>
>>> /**********
>>> diff --git a/arch/m68k/platform/68000/m68328.c
>>> b/arch/m68k/platform/68000/m68328.c
>>> index a86eb66..c042e498 100644
>>> --- a/arch/m68k/platform/68000/m68328.c
>>> +++ b/arch/m68k/platform/68000/m68328.c
>>> @@ -20,9 +20,6 @@
>>> #include <linux/rtc.h>
>>> #include <asm/machdep.h>
>>> #include <asm/MC68328.h>
>>> -#if defined(CONFIG_PILOT) || defined(CONFIG_INIT_LCD)
>>> -#include "bootlogo.h"
>>> -#endif
>>>
>>>
>>> /***************************************************************************/
>>>
>>> @@ -42,13 +39,14 @@ void m68328_reset (void)
>>>
>>>
>>> /***************************************************************************/
>>>
>>> -void config_BSP(char *command, int len)
>>> +void __init config_BSP(char *command, int len)
>>> {
>>> printk(KERN_INFO "\n68328 support D. Jeff Dionne
>>> <jeff@uclinux.org>\n");
>>> printk(KERN_INFO "68328 support Kenneth Albanowski
>>> <kjahds@kjshds.com>\n");
>>> printk(KERN_INFO "68328/Pilot support Bernhard Kuhn
>>> <kuhn@lpr.e-technik.tu-muenchen.de>\n");
>>>
>>> mach_hwclk = m68328_hwclk;
>>> + mach_sched_init = hw_timer_init;
>>> mach_reset = m68328_reset;
>>> }
>>>
>>> diff --git a/arch/m68k/platform/68000/m68EZ328.c
>>> b/arch/m68k/platform/68000/m68EZ328.c
>>> index a6eb72d..84a1a9d 100644
>>> --- a/arch/m68k/platform/68000/m68EZ328.c
>>> +++ b/arch/m68k/platform/68000/m68EZ328.c
>>> @@ -70,6 +70,7 @@ void config_BSP(char *command, int len)
>>> #endif
>>>
>>> mach_hwclk = m68328_hwclk;
>>> + mach_sched_init = hw_timer_init;
>>> mach_reset = m68ez328_reset;
>>> }
>>>
>>> diff --git a/arch/m68k/platform/68000/m68VZ328.c
>>> b/arch/m68k/platform/68000/m68VZ328.c
>>> index eb6964f..8c4ae7a 100644
>>> --- a/arch/m68k/platform/68000/m68VZ328.c
>>> +++ b/arch/m68k/platform/68000/m68VZ328.c
>>> @@ -182,6 +182,7 @@ void config_BSP(char *command, int size)
>>> init_hardware(command, size);
>>>
>>> mach_hwclk = m68328_hwclk;
>>> + mach_sched_init = hw_timer_init;
>>> mach_reset = m68vz328_reset;
>>> }
>>>
>>> diff --git a/arch/m68k/platform/68000/timers.c
>>> b/arch/m68k/platform/68000/timers.c
>>> index ec30acb..49b4b63 100644
>>> --- a/arch/m68k/platform/68000/timers.c
>>> +++ b/arch/m68k/platform/68000/timers.c
>>> @@ -24,7 +24,16 @@
>>> #include <asm/setup.h>
>>> #include <asm/pgtable.h>
>>> #include <asm/machdep.h>
>>> +#if defined(CONFIG_M68EZ328)
>>> +#include <asm/MC68EZ328.h>
>>> +#else
>>> +#if defined(CONFIG_M68VZ328)
>>> #include <asm/MC68VZ328.h>
>>> +#else
>>> +#include <asm/MC68328.h>
>>> +#endif /* CONFIG_M68VZ328 */
>>> +#endif /* CONFIG_M68EZ328 */
>>> +
>>>
>>>
>>> /***************************************************************************/
>>>
>>> @@ -105,18 +114,19 @@ void hw_timer_init(irq_handler_t handler)
>>> /* disable timer 1 */
>>> TCTL = 0;
>>>
>>> - /* set ISR */
>>> - setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
>>> -
>>> /* Restart mode, Enable int, Set clock source */
>>> TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
>>> TPRER = CLOCK_PRE;
>>> TCMP = TICKS_PER_JIFFY;
>>>
>>> - /* Enable timer 1 */
>>> - TCTL |= TCTL_TEN;
>>> clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
>>> timer_interrupt = handler;
>>> +
>>> + /* set ISR */
>>> + setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
>>> +
>>> + /* Enable timer 1 */
>>> + TCTL |= TCTL_TEN;
>>> }
>>>
>>>
>>> /***************************************************************************/
>>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-02-22 3:57 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-02-20 23:47 [PATCH] MC68328 platform code fix Luis Alves
2013-02-21 13:53 ` Greg Ungerer
2013-02-21 19:57 ` Luis Alves
2013-02-22 3:57 ` Greg Ungerer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox