Re: [PATCH] locale.1, pldd.1, sprof.1, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, chmod.2, chown.2, chroot.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_wait.2, exit_group.2, fallocate.2, fanotify_mark.2, fcntl.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, gethostname.2, getitimer.2, getpagesize.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getunwind.2, getxattr.2, init_module.2, inotify_init.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_fat.2, ioctl_tty.2, ioctl_userfaultfd.2, ioprio_set.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, nfsservctl.2, open.2, open_by_handle_at.2, openat2.2, outb.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, recv.2, recvmmsg.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, seccomp.2, select.2, semctl.2, semget.2, semop.2, send.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, setns.2, setpgid.2, setxattr.2, shmop.2, sigaction.2, sigprocmask.2, sigwaitinfo.2, splice.2, spu_create.2, spu_run.2, stat.2, statx.2, subpage_prot.2, symlink.2, sync_file_range.2, syscall.2, sysctl.2, syslog.2, tee.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, tkill.2, umount.2, unlink.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vmsplice.2, wait4.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_init.3, aio_suspend.3, argz_add.3, asin.3, asinh.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsearch.3, bstring.3, bswap.3, btowc.3, btree.3, byteorder.3, bzero.3, cacos.3, cacosh.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, creal.3, crypt.3, csin.3, csinh.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, div.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, drand48.3, drand48_r.3, duplocale.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fenv.3, fexecve.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmemopen.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseeko.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gcvt.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdtablesize.3, getenv.3, getgrent.3, getgrent_r.3, getgrnam.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, lrint.3, lround.3, lsearch.3, makedev.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, netlink.3, newlocale.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_init.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, putwchar.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, readdir.3, readdir_r.3, realpath.3, recno.3, regex.3, remainder.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, siginterrupt.3, sigpause.3, sigsetops.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sqrt.3, stailq.3, stdin.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, system.3, tailq.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, tzset.3, ualarm.3, ungetwc.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wprintf.3, xdr.3, y0.3, cciss.4, dsp56k.4, fuse.4, hpsa.4, lirc.4, sd.4, sk98lin.4, st.4, acct.5, charmap.5, elf.5, repertoiremap.5, termcap.5, tzfile.5, ascii.7, bpf-helpers.7, environ.7, futex.7, glob.7, locale.7, man-pages.7, math_error.7, netlink.7, packet.7, posixoptions.7, rtld-audit.7, sigevent.7, sock_diag.7, tcp.7, udp.7, unix.7, uri.7, zdump.8, zic.8: srcfix: 's/^.nf$/.EX/; s/^.fi$/.EE/'

Re: [PATCH] locale.1, pldd.1, sprof.1, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, chmod.2, chown.2, chroot.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_wait.2, exit_group.2, fallocate.2, fanotify_mark.2, fcntl.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, gethostname.2, getitimer.2, getpagesize.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getunwind.2, getxattr.2, init_module.2, inotify_init.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_fat.2, ioctl_tty.2, ioctl_userfaultfd.2, ioprio_set.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, nfsservctl.2, open.2, open_by_handle_at.2, openat2.2, outb.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, recv.2, recvmmsg.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, seccomp.2, select.2, semctl.2, semget.2, semop.2, send.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, setns.2, setpgid.2, setxattr.2, shmop.2, sigaction.2, sigprocmask.2, sigwaitinfo.2, splice.2, spu_create.2, spu_run.2, stat.2, statx.2, subpage_prot.2, symlink.2, sync_file_range.2, syscall.2, sysctl.2, syslog.2, tee.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, tkill.2, umount.2, unlink.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vmsplice.2, wait4.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_init.3, aio_suspend.3, argz_add.3, asin.3, asinh.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsearch.3, bstring.3, bswap.3, btowc.3, btree.3, byteorder.3, bzero.3, cacos.3, cacosh.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, creal.3, crypt.3, csin.3, csinh.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, div.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, drand48.3, drand48_r.3, duplocale.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fenv.3, fexecve.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmemopen.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseeko.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gcvt.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdtablesize.3, getenv.3, getgrent.3, getgrent_r.3, getgrnam.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, lrint.3, lround.3, lsearch.3, makedev.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, netlink.3, newlocale.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_init.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, putwchar.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, readdir.3, readdir_r.3, realpath.3, recno.3, regex.3, remainder.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, siginterrupt.3, sigpause.3, sigsetops.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sqrt.3, stailq.3, stdin.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, system.3, tailq.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, tzset.3, ualarm.3, ungetwc.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wprintf.3, xdr.3, y0.3, cciss.4, dsp56k.4, fuse.4, hpsa.4, lirc.4, sd.4, sk98lin.4, st.4, acct.5, charmap.5, elf.5, repertoiremap.5, termcap.5, tzfile.5, ascii.7, bpf-helpers.7, environ.7, futex.7, glob.7, locale.7, man-pages.7, math_error.7, netlink.7, packet.7, posixoptions.7, rtld-audit.7, sigevent.7, sock_diag.7, tcp.7, udp.7, unix.7, uri.7, zdump.8, zic.8: srcfix: 's/^.nf$/.EX/; s/^.fi$/.EE/'

[Michael Kerrisk (man-pages)]

Hi Alex,

On 11/15/20 3:07 PM, Alejandro Colomar wrote:
> Reported-by: G. Branden Robinson <g.branden.robinson@gmail.com>
> Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
> ---
> 
> Hi Michael,
> 
> As we discussed,
> I removed _every_ appearance of [.nf] and [.fi] from the pages.

Ooops -- I don't quite recall the details of that discussion.
But, this is not so simple.

> There were some unmatched [.nf] appearances,
> which I manually matched with [.EE].

In cases like this, it would probably be better to split this
out into separate patches with a small preparatory patch that
fixes the unbalanced .nf macros, followed by the bigger patch,
but even so, it's not so simple...

.nf/.fi appears in two places generally:
(1) Inside the SYNOPSIS (many pages)
(2) Elsewhere in the page (fewer pages)

Probably, most (all?) cases in the second category should 
really be .EX/.EE.

But in the SYNOPSIS, .nf/.fi is used inconsistently. The 
majority of pages use it, but a substantial minority (200+ pages)
do not (e.g., chdir.2). (That inconsistency is a mess from
history.) Why does this matter? Well, theoretically at least,
pages might be rendered to something other than the terminal.
I care at least a little bit about PDF rendering[1], and the
inconsistency means that converting .nf/fi to .EX/.EE will
produce a very different appearance in pages that currently
do/don't use .nf/.fi in the SYNOPSIS.

What to do? I'm not sure. When I look at the PDF renderings,
using simply .nf/.fi (or nothing at all) in the SYNOPSIS
produces a variable-width-font output that is visually
appealing for the function prototypes. Switching to
.EX/.EE, the result is not unpleasant, but I'm not
sure I prefer it (in a PDF rendering).[2]

As a first step, all pages should probably be using .nf/.fi
in the SYNOPSIS. But, that's probably a painful manual edit.
I've been manually fixing pages over the years, but many
are not fixed yet.

> That's the reason there are a few more insertions than deletions.


I manually fixed chroot.2, memfd_create.2, and tailq.3. Were there
any others?

> Woah, 439 KiB of a patch...

:-)

 
> I tested a few of the pages to see
> if anything changed in the rendered output.
> Apparently, no.
> I hope that holds throughout all of the modified pages.
> 
> BTW, I had to script a bit to get the subject of the commit
> (as you can probably guess I didn't write that myself :p)
> Would you want to add that to 'scripts/'?

I myself have a small script based around the output of

   git status | grep 'modified:' | awk '{print $NF}'

How do you do it?

Thanks,

Michael

[1] 
function pdfmanq {
    man -Tps -l $1 > /tmp/$(basename $1).$$.ps
    ps2pdf /tmp/$(basename $1).$$.ps $1.pdf
}

function pdfman {
    pdfmanq $1
    evince $1.pdf    # Or whatever PDF viewer you use
}

# pdfman somepage.n

[2]
But I am perhaps old school on this point.

-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/

Re: [PATCH] ...: srcfix: 's/^.nf$/.EX/; s/^.fi$/.EE/'

[Alejandro Colomar (man-pages)]

[[ Title trimmed; I couldn't read the contents on Thunderbird ]]

Hi Michael,

On 11/15/20 11:32 PM, Michael Kerrisk (man-pages) wrote:
> Hi Alex,
> 
> On 11/15/20 3:07 PM, Alejandro Colomar wrote:
>> Reported-by: G. Branden Robinson <g.branden.robinson@gmail.com>
>> Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
>> ---
>>
>> Hi Michael,
>>
>> As we discussed,
>> I removed _every_ appearance of [.nf] and [.fi] from the pages.
> 
> Ooops -- I don't quite recall the details of that discussion.
> But, this is not so simple.

Actually, Branden and I discussed that a few days ago,
and IIRC we (Branden, you, and I) mentioned it a long time ago.

> 
>> There were some unmatched [.nf] appearances,
>> which I manually matched with [.EE].
> 
> In cases like this, it would probably be better to split this
> out into separate patches with a small preparatory patch that
> fixes the unbalanced .nf macros, followed by the bigger patch,
> but even so, it's not so simple...

Yes, I should've done that...
I'll fix those separately.
Actually one of those was my fault (tailq.3).

> 
> .nf/.fi appears in two places generally:
> (1) Inside the SYNOPSIS (many pages)
> (2) Elsewhere in the page (fewer pages)
> 
> Probably, most (all?) cases in the second category should 
> really be .EX/.EE.
> 
> But in the SYNOPSIS, .nf/.fi is used inconsistently. The 
> majority of pages use it, but a substantial minority (200+ pages)
> do not (e.g., chdir.2). (That inconsistency is a mess from
> history.) Why does this matter? Well, theoretically at least,
> pages might be rendered to something other than the terminal.
> I care at least a little bit about PDF rendering[1], and the
> inconsistency means that converting .nf/fi to .EX/.EE will
> produce a very different appearance in pages that currently
> do/don't use .nf/.fi in the SYNOPSIS.
> 
> What to do? I'm not sure. When I look at the PDF renderings,
> using simply .nf/.fi (or nothing at all) in the SYNOPSIS
> produces a variable-width-font output that is visually
> appealing for the function prototypes. Switching to
> .EX/.EE, the result is not unpleasant, but I'm not
> sure I prefer it (in a PDF rendering).[2]
> 
> As a first step, all pages should probably be using .nf/.fi
> in the SYNOPSIS. But, that's probably a painful manual edit.
> I've been manually fixing pages over the years, but many
> are not fixed yet.

Hmm, didn't think about those.
I agree that it may be nicer with .nf/.fi for the SYNOPSIS
from what you say
(I'll try it myself).
I'll see if I can come up with a script that
keeps .nf/.fi in the SYNOPSIS
and changes everything else.

For the rest, you would change to .EX/.EE, right?

> 
>> That's the reason there are a few more insertions than deletions.
> 
> 
> I manually fixed chroot.2, memfd_create.2, and tailq.3. Were there
> any others?

No... probably.
I checked that the number of .nf+.fi was even for a single file,
and that the total number of .nf equaled
the total number of .fi in a directory
(it was too much work to check every file).

> 
>> Woah, 439 KiB of a patch...
> 
> :-)
> 
>  
>> I tested a few of the pages to see
>> if anything changed in the rendered output.
>> Apparently, no.
>> I hope that holds throughout all of the modified pages.
>>
>> BTW, I had to script a bit to get the subject of the commit
>> (as you can probably guess I didn't write that myself :p)
>> Would you want to add that to 'scripts/'?
> 
> I myself have a small script based around the output of
> 
>    git status | grep 'modified:' | awk '{print $NF}'
> 
> How do you do it?

I just sent a patch before reading this email.
Mine is a bit more reliable I think,
but maybe you can still improve it :)

> 
> Thanks,
> 
> Michael
> 
> [1] 
> function pdfmanq {
>     man -Tps -l $1 > /tmp/$(basename $1).$$.ps
>     ps2pdf /tmp/$(basename $1).$$.ps $1.pdf
> }
> 
> function pdfman {
>     pdfmanq $1
>     evince $1.pdf    # Or whatever PDF viewer you use
> }
> 
> # pdfman somepage.n

Thanks!

> 
> [2]
> But I am perhaps old school on this point.
> 

I tend to be so too, even though I'm 27 :p

Cheers,

Alex

Re: [PATCH] ...: srcfix: 's/^.nf$/.EX/; s/^.fi$/.EE/'

[Michael Kerrisk (man-pages)]

Hi Alex,

>> .nf/.fi appears in two places generally:
>> (1) Inside the SYNOPSIS (many pages)
>> (2) Elsewhere in the page (fewer pages)
>>
>> Probably, most (all?) cases in the second category should 
>> really be .EX/.EE.
>>
>> But in the SYNOPSIS, .nf/.fi is used inconsistently. The 
>> majority of pages use it, but a substantial minority (200+ pages)
>> do not (e.g., chdir.2). (That inconsistency is a mess from
>> history.) Why does this matter? Well, theoretically at least,
>> pages might be rendered to something other than the terminal.
>> I care at least a little bit about PDF rendering[1], and the
>> inconsistency means that converting .nf/fi to .EX/.EE will
>> produce a very different appearance in pages that currently
>> do/don't use .nf/.fi in the SYNOPSIS.
>>
>> What to do? I'm not sure. When I look at the PDF renderings,
>> using simply .nf/.fi (or nothing at all) in the SYNOPSIS
>> produces a variable-width-font output that is visually
>> appealing for the function prototypes. Switching to
>> .EX/.EE, the result is not unpleasant, but I'm not
>> sure I prefer it (in a PDF rendering).[2]
>>
>> As a first step, all pages should probably be using .nf/.fi
>> in the SYNOPSIS. But, that's probably a painful manual edit.
>> I've been manually fixing pages over the years, but many
>> are not fixed yet.
> 
> Hmm, didn't think about those.
> I agree that it may be nicer with .nf/.fi for the SYNOPSIS
> from what you say
> (I'll try it myself).
> I'll see if I can come up with a script that
> keeps .nf/.fi in the SYNOPSIS
> and changes everything else.
> 
> For the rest, you would change to .EX/.EE, right?

I took a closer look [1], and it looks like only a minority
of these should be changed.

There are some that probably should be fixed (e.g., EXAMPLES)
to use .EX/.EE. I just fixed some of those.

But in other cases (e.g., perfmonctl.2, fenv.3), there are
inline function prototypes (as in SYNOPSIS) or some cases
where .nf/.fi is really being used to stop line filling.

Sometimes, in the latter case, .nf/.fi is being used to do
a "poor man's" table (e.g., see ioctl_tty.2); those should
be converted to real tables, since the "poor man's" version
does not render well in PDF (e.g., ioctl_tty.2). I just
fixed a few of the worst cases.

Of the remaining uses of .nf/.fi, I didn't notice any cases that
really bothered me. Maybe at this point it's a case of 
"move along, there's nothing to see here" :-).

>>> That's the reason there are a few more insertions than deletions.
>>
>>
>> I manually fixed chroot.2, memfd_create.2, and tailq.3. Were there
>> any others?
> 
> No... probably.
> I checked that the number of .nf+.fi was even for a single file,
> and that the total number of .nf equaled
> the total number of .fi in a directory
> (it was too much work to check every file).

I just checked in a script that I have for the task: 
check_unbalanced_macros.sh

>>> Woah, 439 KiB of a patch...
>>
>> :-)
>>
>>  
>>> I tested a few of the pages to see
>>> if anything changed in the rendered output.
>>> Apparently, no.
>>> I hope that holds throughout all of the modified pages.
>>>
>>> BTW, I had to script a bit to get the subject of the commit
>>> (as you can probably guess I didn't write that myself :p)
>>> Would you want to add that to 'scripts/'?
>>
>> I myself have a small script based around the output of
>>
>>    git status | grep 'modified:' | awk '{print $NF}'
>>
>> How do you do it?
> 
> I just sent a patch before reading this email.
> Mine is a bit more reliable I think,
> but maybe you can still improve it :)

Thanks. If you could just resend with copyright and license, 
I'll check it in.

Thanks,

Michael

[1] 
for p in man?/*.[1-8]; do \
    if cat $p | sed '/SH SYNOP/,/^\.SH/d' | grep -q '\.nf'; then echo $p; fi; \
done



-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/

Re: [PATCH] ...: srcfix: 's/^.nf$/.EX/; s/^.fi$/.EE/'

[Alejandro Colomar (man-pages)]

On 11/16/20 11:28 AM, Michael Kerrisk (man-pages) wrote:
[...]
> 
> I took a closer look [1], and it looks like only a minority
> of these should be changed.
> 
> There are some that probably should be fixed (e.g., EXAMPLES)
> to use .EX/.EE. I just fixed some of those.
> 
> But in other cases (e.g., perfmonctl.2, fenv.3), there are
> inline function prototypes (as in SYNOPSIS) or some cases
> where .nf/.fi is really being used to stop line filling.
> 
> Sometimes, in the latter case, .nf/.fi is being used to do
> a "poor man's" table (e.g., see ioctl_tty.2); those should
> be converted to real tables, since the "poor man's" version
> does not render well in PDF (e.g., ioctl_tty.2). I just
> fixed a few of the worst cases.
> 
> Of the remaining uses of .nf/.fi, I didn't notice any cases that
> really bothered me. Maybe at this point it's a case of 
> "move along, there's nothing to see here" :-).

I see, those are not the droids I was looking for :-)

Cheers,

Alex