Re: [PATCH v5 01/10] dt-bindings: media: Add amlogic,c3-mipi-csi2.yaml

[Keke Li <keke.li@amlogic.com>]

Hi Krzysztof

Thanks for your reply

On 2024/12/27 15:19, Krzysztof Kozlowski wrote:
> [You don't often get email from krzysztof.kozlowski@linaro.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> [ EXTERNAL EMAIL ]
>
> On 27/12/2024 08:09, Keke Li via B4 Relay wrote:
>> From: Keke Li <keke.li@amlogic.com>
>>
>> c3-mipi-csi2 is used to receive mipi data from image sensor.
>>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Keke Li <keke.li@amlogic.com>
>> ---
>>   .../bindings/media/amlogic,c3-mipi-csi2.yaml       | 131 +++++++++++++++++++++
>>   MAINTAINERS                                        |   6 +
>>   2 files changed, 137 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
>> new file mode 100644
>> index 000000000000..76b68d1e7316
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
>> @@ -0,0 +1,131 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/amlogic,c3-mipi-csi2.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic C3 MIPI CSI-2 receiver
>> +
>> +maintainers:
>> +  - Keke Li <keke.li@amlogic.com>
>> +
>> +description:
>> +  MIPI CSI-2 receiver contains CSI-2 RX PHY and host controller.
>> +  It receives the MIPI data from the image sensor and sends MIPI data
>> +  to MIPI adapter.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - amlogic,c3-mipi-csi2
>> +
>> +  reg:
>> +    maxItems: 3
>> +
>> +  reg-names:
>> +    items:
>> +      - const: aphy
>> +      - const: dphy
>> +      - const: host
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 2
>> +
>> +  clock-names:
>> +    items:
>> +      - const: vapb
>> +      - const: phy0
>> +
>> +  assigned-clocks: true
>> +
>> +  assigned-clock-rates: true
> NAK
>
> Adding new properties *INVALIDATES REVIEW*. Otherwise you can sneak
> whatever crap past reviewers.
>
> Drop all new properties and drop my review tag.


OK, will drop all new properties and drop your review tag. Thanks

>
> Best regards,
> Krzysztof